Hello,
i am new here and dont speal well english. but i will try tp explaine my problem.
i have a Mediapad FHD. I tried to flash the firmware from Mediapad Link. the experiment has been successful, but unfortunately with unpleasant side effects.
the device had a bootloop. when i powerd off, then after 10 second it startet automaticly.
i tried to flash the original firmware over sd-card, but it doesnt work. also its possible to start in fastboot.
can some help me please.
thanks
no help?
cant believe its been so long and no one tried to help at all in this forum.
i have the same problem too but seems like i am at a dead end
were you able to fix this? let me know
Allan F
Related
Hi I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet.
After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good.
The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command.
Tried "fastboot flash recovery cwm.img" after wait command, no luck.
Is there anything else I can try?
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Turzyx said:
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Click to expand...
Click to collapse
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
lamkc said:
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
Click to expand...
Click to collapse
I guess this is the site he is refering to:
http://www.goclever.com/uk/support,c3/software-update,a28.html?aic=5&aia=185&ail=10
The LiveSuit pack is there for download, as well as the roms.
But there are three different 4.0 roms to choose from, and also a couple of 2.3 roms. I dont know which one he did use.
Since your Kurio 7 is bricked anyway, I guess you can try one by one and see if any of them work.
Please tell which one, if you succeed.
Hello everyone. This is a long story, so thanks in advance to read it and try to help me.
I've got a Trekastor surftab Ventos 8.0 this one --> http://www.trekstor.de/detalles-de-surftabs/product/272.html?file=tl_files/generatedPdf/272-de.pdf
model st80208-2 . I'm not sure if it is the 8 or 16 GB. And I don't know how to check it because the tablet is bricked.
How did I brick the tab?
This is a good question. I had lost the charger and I tried with another one with a higher voltage. This ruined the batery. And when I found the charger the tablet show a strange behaviour. It was trying to start but reboot before to finish. I was able to finish a full boot but the batery only works for a few minutes. After solve the batery problem, now I can start the tablet without problem about the voltage but, it seems like all this failed attemps to boot have made some damage somewhere.
What I have now?
The tablet start. It show's the trekstor logo. After that it show's the android logo, and that's all. It stuck's looping in the android logo.
What I have tried?
Everything.
1.- Custom recovery. http://forum.xda-developers.com/showthread.php?t=2039964 or this http://forum.xda-developers.com/showthread.php?t=1995984
This method not working in my tablet even when it was not bricked. (I tried it, when I was trying to get root access a month ago).
Power + Volumen (-) gets nothing at all. It's start normally. (and loop in my currently situation)
Power + Volumen (+) gets this screen http://cdn.howtogeek.com/wp-content/uploads/2012/12/android-recovery-mode.jpg and anything happens no matter what button I'm pressing even with the custom recovery in the sdcard.
2.- I tried to flash the tablet, but I didn't find information about how to do it and trust me, I have searched a lot.
I triend with this software: "Amlogic Image Burning Tool v.1.6.2.2" and this firmware http://forum.xda-developers.com/showthread.php?t=2039964 . But I get the error "find no upgrade config, please load it manually". I'm pretty sure I doing something wrong, but I have no experience with this software or flashing in general.
That's all for now I'm tired of reading this forum and this other one in german. (thanks to google translator) http://www.android-hilfe.de/surftab-ventos-8-0-forum/ and I did not find anything useful for me
You people are my only hope. (Any Star wars fan in the room?:laugh:
So any help would be wonderful, thanks in advance and sorry for my mistakes, english is no my mother language.
I need help with my mediapad S8-301L i can only get it to the logo screen on boot. and if i plug it in to my laptop i can get it in to fastboot mode. is there a way i can recover this device using fastboot????
i had rooted it and installed twrp like i had before. but due to formatting and starting a fresh to installing skygo i found my self rooting it again this time the same method bricked my device.... any help would be loved thanks in advance...
:good::good::good::good:
M1 s8 301l
hi m8, did u manage to fix this issue? im currently experiencing the same thing with mine, its just sitting at The EE splash screen, i can access fastboot, but it will not flash the system.img located from the update file,
would love to find out if there was a fix to this, i can even find the original EE rom that came supplied with the device...
Did you solve this , mines bricked due to overheating n desperately need a list from /dev/block/platform/msmxxxxx/by_name
That way I can extract the update.app correctly
Any help obliged
Rgds
Hi I really need some help unbricking my phone.
I have a doogee Mini F1 Turbo which was rooted. Today I did an OTA update (bad idea).
During the update the word ERROR appeared on the screen. When the phone rebooted it was stuck on the white boot logo screen.
I've downloaded the SP Flash tool and rom from the doogee website
When I try and re-flash I get the Message "Error initializing scatter file failed. Please check the name of scatter file you load is legal"
Hopefully some body can point me in the right direction and help me get my phone working again.
Thanks for your time,
Gavin
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Soultion
Hi Denclan,
Sorry about the delay inb replying.
Yes I found a solution to my reflashing problem. What I had to do was move the contents of the ROM Download into to same folder as the Flashing program. This then worked.
I would be carefull with the R07 update.
After reflashing my phone I updated it before rooting. Then rooted it. Everything seemed fine but the battery drain was shocking so I've flashed it back to R05 and that works a treat.
Hope this helps you out.
Gavin
denclan said:
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Click to expand...
Click to collapse
Hi everyone!
I'm new on this forum and i will need help fixing my huawei mediapad m1 S8-301L 8gb version. Device is trying to boot os but in a while it shows just white weird screen. Fastboot is working i guess, atleast i can flash the device through it. I've tried to flash boot/cache/userdata/recovery/system images but it doesn't help at all (gives still weird white screen in boot) so any ideas? Also fastboot erase command says remote: command not allowed. My tablet is in this condition because i tried to clean flash my stock os. Reason why i tried to clean flash my tablet is because i didn't get rid off kingoroot. If someone can help me with this situtation i will be thankful.
Thank you!
Invisibleyy
Did you get anywhere with this, tried dload stock rom I guess, do you still have the phone?!
Rgds