Hello there,
I have CM 11 right now. When I first installed it, I had Clockwork mod on. I switched it to TWRP, and I just got an update for CM 11 today. I tried installing the update, but now my phone is recovery booting into TWRP every time it boots up.
What can I do?
Thanks!
Still stuck..can someone help me please?
Flash CWM and flast the rom again
U can only use cwm to flash cm
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Related
I've been running the Cyanogen Mod 10.1 nightly's and yesterday my tablet crashed and rebooted but would not go past the boot animation. I tried restarting it many time but it only boots to the animation. I booted into bootloader mode and wipted everything and tried installing an older nightly and the wingray gapps. It still is stuck not booting up only showing the spinning boot animation. Anyone have any ideas on what I can do? Any help would be greatly appreciated
Is there a way to update to a working rom though odin? I can't figure out how to do that.
Guys I installed the latest nightly, except for the keyboard problem, the resolution seems to be wrong: the writing in fact are blurred. is it a known problem?
Patfors613 said:
Is there a way to update to a working rom though odin? I can't figure out how to do that.
Click to expand...
Click to collapse
Yes, you can use odin to flash a rom, but it must be a stock rom, after which you will need to root your device again, install CWM recovery and then flash the nightly again. To use odin, you will need to put the device in download mode connect to the pc after activating odin and when the device is recognised (one of the boxes will light up in yellow) then put the extracted firmware in PDA of odin and click start. If successful, a green PASS will show in odin. Disconnect the device and wait for the device to boot up. You can try ICS 4.0.4 which is commonly available in Samsmobile.
Sent from my GT-P7500 using xda app-developers app
Mine just died too. Went back to stock 4.0.4
Sent from my GT-P7500R using xda app-developers app
For the bootloop, you can try to Wipe Cache/Dalvik.
But honestly, every new update that is pushed out, it's harder for our tabs to manage. So unstable to keep it up-to-date with every version, haha.
Thanks! I'll be going back to stock when I return home from work. Does anyone know where I can get CM 9 or 10 nightlies or stable ROM?
Just rooted and unlocked bootloader. I have TWPR installed but it seems that I need CWM in order to flash AOSP roms (?). I tried to flash CWM via Rom Manager and also through TWRP but when I reboot recovery the screen flashes and then goes dark. Tried multiple times. Any help would be appreciated. Thank you.
Sent from my SCH-I605 using xda app-developers app
Just update to the latest TWRP version.
TWRP, especally the latest version, will flash all the roms. I've used nothing but it since it became available and I've flashed every one of the Gnote 2 roms for the 605.
Hi all,
I've been on the CM 10.1 nightlies for some time now, but wanted to try out CM 10.2. I'm on the ICS bootloaders and was using TWRP 2.6.0.0. After wiping everything but the SD card, and attempting to install 10.2, I've had nothing but bad luck with any ROM I try to install. I can install and boot 10.2 Diamond ROM by AAcount, but as soon as I try to connect to wifi I reboot and get stuck at the CM animation. Any other rom (4.2.2 or 4.3) I try to install can't get passed the Samsung logo or the initial CM animation. I've wiped, reflashed bootloaders, tried CWM 6.0.3.6 and had to resort to adb sideloading my ROM's since I kept getting "failed" messages when trying to install the ROM from the tablet directly.
Does anyone know what I can do to help fix this? (At this point I just want ANYTHING to load/work)
I have the P4WIFI model.
Update 1:
One of the error messages I get when trying to install via TWRP -
"E:Unable to open zip file.
Error flashing zip '/sdcard/Download/gapps-jb-20130813-signed.zip'"
And via adb sideload -
"failed to write data 'protocol fault (no status)'"
Demonic240 said:
Hi all,
I've been on the CM 10.1 nightlies for some time now, but wanted to try out CM 10.2. I'm on the ICS bootloaders and was using TWRP 2.6.0.0. After wiping everything but the SD card, and attempting to install 10.2, I've had nothing but bad luck with any ROM I try to install. I can install and boot 10.2 Diamond ROM by AAcount, but as soon as I try to connect to wifi I reboot and get stuck at the CM animation. Any other rom (4.2.2 or 4.3) I try to install can't get passed the Samsung logo or the initial CM animation. I've wiped, reflashed bootloaders, tried CWM 6.0.3.6 and had to resort to adb sideloading my ROM's since I kept getting "failed" messages when trying to install the ROM from the tablet directly.
Does anyone know what I can do to help fix this? (At this point I just want ANYTHING to load/work)
I have the P4WIFI model.
Click to expand...
Click to collapse
Last time I experienced something like that, the culprit was inadequate memory. Take a look at that.
Secondly, when you said you wiped everything, hope it includes formatting system under Mounts and Storages. If it doesn't then you need to do it for a clean installation.
Cheers.
Sent from my GT-P7500 using xda app-developers app
John Kester said:
Last time I experienced something like that, the culprit was inadequate memory. Take a look at that.
Secondly, when you said you wiped everything, hope it includes formatting system under Mounts and Storages. If it doesn't then you need to do it for a clean installation.
Cheers.
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I formatted system as well. I should still have a few gigs free on the tablet.
Updated OP with more info.
Tried reflashing to stock?
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
Tried reflashing to stock?
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
No, had an issue just flashing in general. I'm not sure how/why, but I wiped my entire internal SD and managed to install DiamondROM + PA Gapps and was able to boot up.
Hey guys I need help really badly!
So I upgraded to CM 11 and was using it for a few days like whatever the Play Store isn't working and some app crashes its was on kitkat 4.4.3 and I was tired of this and wanted to download some apps. So I went to the on the air update and wen't to install an update and download CM 10.2 and hit reboot and install. When I did this it was booting up but had the CM 11 boot logo in a boot loop and said optimizing apps and I'm like ok seemed like it worked. But it was still in a boot loop after I restarted so I went to flash the boot.img from CM 10.2 and I did so and nothing happend still the same boot logo from CM 11 looping. So then I'm like must still be on CM 11 so I downloaded it and flash its boot.img and now my phone starts up and boots into a black screen. Help please don't know what to do and I'm freaking out. :crying:
First of which recovery you have?
Second, what kind of HTC one you have m7? Unlocked, s-off?
Did you tried a factory reset and clear the cache data using the recovery?
Sent from my HTC One using xda app-developers app
I workerd some days before and i dont know what happend.
I unlocked my bootloader and did pretty much everything. Ive installed cm12 and everything worked perfectly. Only thing that annoys me was the Cyanogenrecovery that forced me to flash twrp manually after every update.
The TWRP App says i got 2.8.4.0 installed. But i cant boot into it. The Led blinks pink and then it goes off and cm starts booting like nothing happend. I tried to reflash the recovery but it did not work.
Please help, i just want to update cm and install xposed
xan_asmodi said:
To gain a persistent recovery, one needs to flash a recovery to the fota partition as explained here: cant post twrp sirius link here bc xda spam prevent...
I figured that it was an error with Infected's CM12 nightlies. I flashed the latest boot.img and I was sorted.
Click to expand...
Click to collapse
this fixed it for me ^^