hi all,
i am currently using the slim booktype pdair leather case which have a belt clip and it fits on my multimedia dock perfectly without removing it. However, the case after 1 month if use is cracking and very flimsy. I am looking for an alternative or might have to repurchase another one.
main criteria is it must connect to the multimedia dock and a belt clip is a bonus.
Anyone tested the piel frama? kinda look thick and may not fit the multimedia dock
Related
Anyone have any leads on sources of cases to fit the Wizard? The one that comes with the K-Jam look decent of first view, but since I'll probably want something nicer I figured I would get this thread started.
Robert Harrold
Houston, TX (Ordered my K-Jam through MMB... hope to have it next Friday!)
Well, an update on this, I picked up a Targus Small Camera case Model DCCS00 and while it is a bit loose front to back it fits nicely side to side. A bit bulky but functional and It is easy to insert/remove the device. Also it securely attaches to my belt so I don't have to worry about scraping it off on my office chair. It'll do until someone releases a 'made for' case.
Robert Harrold
Houston, TX
any news with more cases to buy for the k-jam??
anyone?
I ordered and got this case for my wizard after it was recommended on another board. The guy said he found it at a mall in NY at a mobile phone accessory cart. I like it a lot. Fits perfect. The belt clip (although it isnt visible) has a built in swivel so you can wear it vertical / horizontal / or on an angle. I wear it at an angle and its so easy to place in pouch and pull out. I can also charge with the wizard in the case becuase it has a small opening in the bottom.
http://www.shopcell.com/cell-phones/cellular-accessories/HANDSPRING%20PALMONE/Treo$650/Leather-Case-Treo-650-600-Vertical-Pouch-Black-Leather/TREO650LP.html
I just ordered an OEM blackberry 71xx slip case belt clip and Tre 6xx slip case from ebay.
http://www.shopblackberry.com/_blac...gory=BlackBerry+7100t&pid=F2222WBW5TARNDHUC9F
I like to concept of slip case rather than attaching something on my belt.
I'll keep everyone posted here...
Review: PDair booktype leather case
I did a review of the PDair booktype leather case here:
http://www.onppc.com/forum/article_read.asp?id=12
Cheers, Sabesh.
I wonder if the flip type PDAir case uses the same technique to keep the k-jam in place.
I prefer the not so bulky cases. using the case that came with Treo 600 atm and it fits perfectly. slightly tight but it fits in my jacket pocket a lot better than any other cases that I've tried.
I have decided to give BB 71xx pouch a try. I had to stretch it a bit in order to get my qtek a nice fitting.
http://natt108.net/qtek/
I am also in a process of streching my treo 600 slip case with a pair of socks and will post some pictures tonight when I get home.
Does anyone have an IPOd 2/3rd Gen slip case? Can you please try and see if it'll fits nicely with your Wizard?
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
For those using the WIZA100 variant of the Wizard...
--
Got this case this AM. It is for the dopod 838 or VPA Compact II. So far so good my only gripe is that the case doesn't allow access to the messaging and ie buttons [when closed] and it is kinda slippery [maybe use it in tandem with a neck strap or handstrap]
--
They have one for the WIZA200 models as well
http://www.pdair.com/scripts/main/viewpda.php?pdaid=194&catid=9
Hi guys
Just received my ali PDair case - ordered Thurs night arrived this morning, outstanding service!! A great case too!!
Simon
I heard something about Aluminium cases and low gsm signal..
Are you having that kind of experience on your ppc ;
I currently have the Htc Wizard/ qtek 9100 and i am looking for a case.
Probably i'll go for the leather one.
no signal problems for me so far been using it for almost a week now... of course signal strength is also determined by your network coverage as well not only your device
Hi
Just checked on the signal stregth, one room in my house has a very weak GSM signal for Vodaphone and when using the PDair case it drops by 1 bar.
Must be shielding
Simon
Plastic screen cover
Does the aluminum case by PDair have a plastic screen cover to protect the screen like the Armor Case by Boxwave (www.boxwave.com)?
yep they have hard plastic screen
PDAir Case
Sabesh mentioned velcro in his review of the PDAir case. Does that mean there is some 'sticky pad attachment' to be done. The case says it closes with magnets, so I can't figure out where the velcro comes in unless it's to secure the handset. if that means sticking something on to the handset then I'm not so keen. i need to be able to get the handset out easily to fit in my car kit.
TIA, Davebo.
The case that comes with the K-Jam isnt as small as it could be so I would like to get a case that is a little more form fitting.
Has anyone looked at the leather case that pdair.com has for the k-Jam/wizard? I cant tell how it attaches to the K-Jam but I think its got a clear plastic sheet that fits in between the screen and keyboard and covers the keyboard. That is why I am reluctant to buy case. I had something like that for my PDA2K and I didnt like the plastic sheet in between keyboard and screen. It seemed that the screen would not slide so easily before using the case and afterwards the screen seemed to be loose and slide to easily. I dont want to mess up the tight feel of the screen / keyboard on this one.
If you know anything about this case or any other please post a response.
Darrin
I am thinking of getting one of the cases on theis page: www.krusell.se. I like the Horizontic style. The cases are shown under the ETEN m500 size but the m500 and K-Jam are about the same size.
The Krusell cases are well made and fit well, but they are not smaller than the stock cases.
Look http://www.krusell.se/product.php?productID=2089&category=16 or http://www.krusell.se/product.php?productID=2128&category=42 although the pdair and piel frama are the only ones that allow you to use the keyboard whilst in the case. I have the pdair.com one and it fits my needs (I am able to use the keybaord quite effectively with the plastic cover (it doesn't cover all of it); I have had the plastic 'crumple' a few times but this minor problem is more than outweighed by the benefits.
these flip cases look quite good
http://www.mobilefun.co.uk/product/8458.htm
I got the Proporta Alu leather case and it is very nice and allows keyboard usage.
zaki67 said:
I got the Proporta Alu leather case and it is very nice and allows keyboard usage.
Click to expand...
Click to collapse
It looks almost identical to the PDAir one. Nice aluminium insert which works with their magnetic car holder. Since when did aluminium react to magnetism??? (I know the probably have a thin magnet insert btw)
Hello,
These cases are also compatible with HTC Wizard:
http://www.expansys.pt/product.asp?code=124376
http://www.expansys.pt/product.asp?code=123697
Anyone has one of them?
Cheers,
Francisco Teixeira
Krusell the way forward...
Krusell is the way forward, with the multidapt clip of course...
http://www.krusell.se/product.php?productID=2089&category
Look on EBay for best prices :wink:
mcwarre said:
zaki67 said:
I got the Proporta Alu leather case and it is very nice and allows keyboard usage.
Click to expand...
Click to collapse
It looks almost identical to the PDAir one. Nice aluminium insert which works with their magnetic car holder. Since when did aluminium react to magnetism??? (I know the probably have a thin magnet insert btw)
Click to expand...
Click to collapse
Do you have the book style (landscape-opening) or the flip style (portrait opening) model?
You don't find any problem with opening and closing the keyboard, with that plastic insert?
I've had the PDAir leather case (flip format -- hinge on the bottom) for several weeks now -- it works pretty well for the most part. It's a bit tricky putting the Wizard in the case; the plastic bit that fits between the keyboard & LCD has a Velcro bit on the end that's a bit thick for the space provided. Said Velcro piece attaches to the case via a tab that folds up over the right side, between the camera button & IR port -- unfortunately it covers the reset hole.
The case is a bit loose-fitting, which probably can't be fixed without sacrificing the ability to deploy the keyboard; AFAIK, it's the only case that lets you use the keyboard without removing the Wizard from the case. It's not as good as the Krusell I used with my BlueAngel, but it's good enough.
Hi all
I haven't found any topic about this case, so here it is:
I recently bought a Tuff-Luv Executive leather pouch for my HTC HD.
http://www.amazon.fr/Tuff-Luv-Execu...1?ie=UTF8&s=electronics&qid=1235746989&sr=8-1
It is quite good, the phone fits very well in it (the camera hole is a bit too low but it is ok anyway). the phone can still be easily to removed from the case.
And it is one of the few leather cases for that phone, that has a hatch that opens to the lower part of the phone (sorry, can't find the words in English, you can see picture) so this is appreciable.
everything is easy to access: stylus, usb port even when the case is closed , volume control, audio jack. Plus it is less expensive than Noreve and Proporta cases (probably not the same durability, but this I can only tell after a while, as it seems to carry on well for now)
So I would gladly recommend it. Anyone else has this case ?
Hope it works out for you. Looks like a pretty well made case.
I'm still trying a few different cases for my HD.
First was the PDA Air book style but it didn't take too long for me to get concerned the two plastic arms that holds the unit in the case are not that secure. The unit can slide and as it is also a belt clip case last thing I wanted was my new shiny HD sliding out and bouncing on the pavement. :-(
Currently have a two piece case of eBay described as "black rubber". Really more of a plastic than rubber and it will do for the short term as only a few dollars.
Today I ordered a Krusell Orbit case. Has the removable flap which covers the screen. I am hoping that with the main section of the case still on the unit it will still fit in the cradle I have. (My cradle has a bit of space around the unit which I hope will accommodate the case)
Your case look good too but the flap attached to the rest of the case at the base so wouldn't allow the unit to sit in the cradle.
Figured since I've already wasted $40 on my Otterbox Commuter (trying to "adapt it"), I'd start a thread to see who has bought a case that works well with the Photon Car Dock.
Bump!
No one has purchased a case for their Photon that works on the Car Dock?
I dont think there are currently any cases on the market that work with the cardock. I have both a TPU Case and an Otterbox Commuter neither of which work with the Cardock. I am going to make a few dremel enhancements to the TPU case to see if i can make it fit.
I purchased the holster case from the Sprint store along with the car dock and it works fine. Don't use the holster portion but do have the back case on it and fits in the car dock and haven't had any issues so far other than a few times the car dock application doesn't fire up always and sometimes I need to re-seat the phone.
Yeah.....I even ordered a cheapo $5 case last night to try, we'll see. Kinda sucks though, ya know?
Ok........even the cheapo $5 case does not fit in the Car Dock. UGHHH!!!!!!!!!!!
I have one of the Philips docks and was wondering if anyone knows of a goods case that I can use. I have the Aluminum Taurus case and I have to take it off to dock. Was wondering if anyone else uses a dock with a case that fits.
I haven't seen the philips dock but I picked up the Zenis dock off of ebay. Was cheap, only $11. It allows use of some thin cases such as the SGP Air Series cases. I am currently using the SGP Linear Series and unfortunately it did not fit on the dock. However since the dock was cheap, I took a dremel to it and quickly made the opening bigger. I can now use it with the case on without issue. Not sure how much the philips dock was but if it was cheap enough, I would recommend trying the same.
I have a Ringke Slim on my phone and it works with the Deidio Innodock Jr. The bottom the dock says it is designed for "skin" and thin cases.