Related
Hello
I have the next issue
I have a Samsung Galaxy Europa GT-I5500
And it bricked when I closed odin 4.36 after, when the phone was in downloading mode due that there was no completion. I wanted to install a newer version of the clockwork (mod) recovery.
I installed an old version but was unable to install the CyanogenMod (hte one from psyke83) that I wanted. And after I wanted to try a newer version of the clockwork (mod).
And now the phone is with the PC---to Phone icon brick mode.
I tried the volume down + main button + power off and isn't working
Also i tried to run the one click unbrick and isn't able to connect to the phone. Seems that the phone doesn't reach the computer
I tried an usb list (lsusb) in the ubuntu and does appear if i connect it.
I tried both in windows 7 and ubuntu
Do you think is a softbrick? Any clues? recomendations or questions for more details
did you find any solution..
i have no warranty since it as directly imported..i have the same problem ..
i was trying to backup my rom when it bricked.. (using rom manager) .... i tried volume down + home + power button (disconnect button) but nothings showed up.
sjehanzeb said:
did you find any solution..
i have no warranty since it as directly imported..i have the same problem ..
i was trying to backup my rom when it bricked.. (using rom manager) .... i tried volume down + home + power button (disconnect button) but nothings showed up.
Click to expand...
Click to collapse
I had a problem with the buttons on the phone the volume down wasn't working.
What do you mean by home button the one with the home icon or the main one with the metal borders because is that button the one that you need to use.
I also tried the resitor of 301kohms between the pins 4 and 5 didn't work.
Now i have the 2.3.7 working stable at the moment
try that combination of buttons if not tell me
I am pretty sure there is nothing you can do about it, if it is completely bricked.
And the phone won't turn on, in any case what so ever?
PurpleBunnies said:
I am pretty sure there is nothing you can do about it, if it is completely bricked.
And the phone won't turn on, in any case what so ever?
Click to expand...
Click to collapse
Depends if it is hard bricked or soft bricked. If the screens turns on and appears the PC---/!\ --- phone. The he can try to use the three key combination or the usb homemade jig. Otherwise he can try to find someone with the JTAG
search in google JTAG galaxy for more info.
sounds like a hard brick. People claim that taking the battery and sim out of the phone for 30 mins (min) and then putting back in and booting to download mode sometimes works
You could try that
MY BROTHER IS IN THE WAY YOU DOWNLOAD but equally can not install any OTHER ONE IS A STRONG BRICK
On galaxy s this also happens from time to time, even i had it once. Try if Odin possibly connects anyway and flash again, if not, remove your battery leave it out for 60 seconds and then try if you can get to download mode again. You definitely have not hardbricked your device...
--------------------------
tapatalked from vizio vtab1008
ALEXIS_0071 said:
MY BROTHER IS IN THE WAY YOU DOWNLOAD but equally can not install any OTHER ONE IS A STRONG BRICK
Click to expand...
Click to collapse
What?
Sent from my GT-I5500 using Tapatalk
Got same problem
Jordanooo said:
sounds like a hard brick. People claim that taking the battery and sim out of the phone for 30 mins (min) and then putting back in and booting to download mode sometimes works
You could try that
Click to expand...
Click to collapse
My GT i5500 Boots into Download mode but I can't seem to find all Stock firmware including CSC etc, all the links I have tried on here are dead or don't have the correct fw for my phone. I would use CFW if I knew what was good and worked but I am not to sure. Any suggestions??
The Stock firmware has the letter code of NJ**2P the stars are unknown letters or numbers but its a UK phone.
hey there, my GT-i5500L, after flashing it with odin and the stock room from sammobile and use the europa ops the phone turn on the screen for 2 secs and reboot, dont shows logo just reboot in a loop, the device manager on pc dont detect it and no matter whtar ey comb i use the download mode never start
@Casper0077
Casper0077 said:
My GT i5500 Boots into Download mode but I can't seem to find all Stock firmware including CSC etc, all the links I have tried on here are dead or don't have the correct fw for my phone. I would use CFW if I knew what was good and worked but I am not to sure. Any suggestions??
The Stock firmware has the letter code of NJ**2P the stars are unknown letters or numbers but its a UK phone.
Click to expand...
Click to collapse
Hello friend!!! You are lucky enough to still be able to get into download mode. Please check you PM box (messages). I am sending you a link you might find helpful.
Best of luck with the device, let me know if I can help more during the process.
---------- Post added at 06:59 PM ---------- Previous post was at 06:46 PM ----------
@dungeongs
dungeongs said:
hey there, my GT-i5500L, after flashing it with odin and the stock room from sammobile and use the europa ops the phone turn on the screen for 2 secs and reboot, dont shows logo just reboot in a loop, the device manager on pc dont detect it and no matter whtar ey comb i use the download mode never start
Click to expand...
Click to collapse
Did you already try: vol up, menu, power on (by this order, holding them all together in the end) ???
(It might be that for your device you should press and hold: vol down, home button, power)
Did you try taking out the battery (for 10 - 15 secs) and trying the above combination again???
Also you might find this page of interest for your case: https://forum.xda-developers.com/showthread.php?t=1734997. Credits to @neerajganga
Please take a look at your PM messages.
A last comment; in my experience, using the latest version of Odin and firmware from the links I sent you, never required extra files (like pit or any other type).
Best of luck! :good: Share how it goes!
hi i've installed os of gt19100 on SGH1777 worked fine but back button was not working.so downgraded to gingerbread.then again installed gt19100 os now i dont see a way to get in download mode by pressing volume up+ volume down + Power button i just see is a battery charging indicator donno how to reset it back to at&t ics
Please help
Ning09 said:
hi i've installed os of gt19100 on SGH1777 worked fine but back button was not working.so downgraded to gingerbread.then again installed gt19100 os now i dont see a way to get in download mode by pressing volume up+ volume down + Power button i just see is a battery charging indicator donno how to reset it back to at&t ics
Please help
Click to expand...
Click to collapse
Button combinations for i9100 are different to get into download and recovery, afaik. Search i9100 forums for proper button combinations, or install an i777 ROM on your i777. On i777 Vol+/Vol-/power is for recovery, not download mode.
Ning09 said:
hi i've installed os of gt19100 on SGH1777 worked fine but back button was not working.so downgraded to gingerbread.then again installed gt19100 os now i dont see a way to get in download mode by pressing volume up+ volume down + Power button i just see is a battery charging indicator donno how to reset it back to at&t ics
Please help
Click to expand...
Click to collapse
You probably flashed I9100 secondary bootloader with one of the firmwares you flashed. That would have changed the button combination. You can try the following: Remove battery and leave it out. Hold down one or both of the volume buttons while plugging in the usb cable which is already attached to your windows pc. If this successfully boots the phone into download mode then you need to flash the I777 secondary bootloader, or the full stock firmware which includes the secondary bootloader using Odin. The files are available in the Download Repository. See the link in my signature.
If the above does not work, then you probably need to buy, borrow or build a USB jig, which will boot the phone into download mode, so that you can flash as above.
creepyncrawly said:
You probably flashed I9100 secondary bootloader with one of the firmwares you flashed. That would have changed the button combination. You can try the following: Remove battery and leave it out. Hold down one or both of the volume buttons while plugging in the usb cable which is already attached to your windows pc. If this successfully boots the phone into download mode then you need to flash the I777 secondary bootloader, or the full stock firmware which includes the secondary bootloader using Odin. The files are available in the Download Repository. See the link in my signature.
If the above does not work, then you probably need to buy, borrow or build a USB jig, which will boot the phone into download mode, so that you can flash as above.
Click to expand...
Click to collapse
Battery was not there still its trying to find battery for charging
i was wondering may be this can help but i cant modify and save the file http://forum.xda-developers.com/showthread.php?t=1746937&page=2
Ning09 said:
Battery was not there still its trying to find battery for charging
i was wondering may be this can help but i cant modify and save the file http://forum.xda-developers.com/showthread.php?t=1746937&page=2
Click to expand...
Click to collapse
I assume you mean it would not go into download mode with the battery out? I wasn't sure if that would work.
You can try to change key mapping if you know what you are doing (I don't), but really just a couple of dollars for a usb jig should boot the phone to download mode. Seems to me that is the easiest and most straight forward way to proceed.
How to Root Galaxy Star pro GT-S7262
using prerooted firmware
http://www.youtube.com/watch?v=ulXHTeUGbfU
1- Enter your phone into Download Mode by pressing ( Volume down key + Home key + Power key ).
2- Open Odin.
3- Download this file http://goo.gl/HNDNkh and extract it.
4- Put the file in the PDA and press start.
5- After flash finish the phone will restart.
6- Open the SuperSu app and press (Continue) then (Normal).
7- The phone now rooted
P.C : This ins't my firmware and I dont know the developer, do it on your risk.
The Prerooted firmware: http://goo.gl/HNDNkh
The Odin: http://goo.gl/0Xdr55
Twitter: https://twitter.com/traien
Email: [email protected]
XDA:DevDB Information
Samsung Galaxy S7262 prerooted firmware, ROM for the Samsung Galaxy Star
Contributors
en.osama
ROM OS Version: 4.1.x Jelly Bean
Version Information
Status: Testing
Created 2014-11-08
Last Updated 2014-11-08
my phone is trash
Luthfi Dimaz said:
Click to expand...
Click to collapse
help pleasse my phone now is a trush after i fla**** with yours prerooted firmware he doesn't boot up or do nothind please reply me :crying:
bamostta said:
help pleasse my phone now is a trush after i fla**** with yours prerooted firmware he doesn't boot up or do nothind please reply me :crying:
Click to expand...
Click to collapse
why you ask me ? ask to own thread
Bricked screen blank issue is solved
Dear user, i faced same issue. After flashing this rom i thought the phone is bricked, but actually the screen was not displaying any content of this ROM's OS. I came to know this when i switched on and heard the booting sound of samsung. The solution for that is you flash the original firmware through ODIN. Please follow these steps.
1. Remove your battery, and apply it again in device
2. Now press Home + Power button + Volume down button for some time then release all buttonn and press Volume up button. (I am sure the screen will be blank and you will not aee anything, but in background it will work and take you to Odin Download mode if you know how to take your device in ODIN mode to flash firmwares. It will be completely guesswork to take your Mobile in ODIN mode if you know exact seconds for how long u need to press Home + Power + Volume Down button and release them)
3. Now start ODIN program on computer and connect your mobile with USB cable to your computer, your ODIN user interface will show "Added" dialogue message. That means your mobile is in ODIN mode and ready to flash.
4. Now flash your original firmware through PDA option.
And yes, i made my phone working in same way. I am sure your phone will work again too. Its tested by me. For any further queries email me on [email protected]
Hi everyone ! I appreciate this forum very much since we do help each other here. So thanks in advance !
I've recently got a Samsung GS7 which was a carrier operator based system (Orange France) and recently, it gave me a bootloader error. I did reflash the bootloader with a newer version and also the system (Android 7.0 FTM) via Odin, all was working perfectly till I downloaded Antutu and tried the benchmarking, when the system went to the CPU multithread, the phone did reboot and when it started, I uninstalled that application to avoid problems. Then, the phone didn't want to reboot afterwhile.
I'm blocked with a black screen and all keys combination doesn't work.
I really need help. It's a G930F. If you need any information; just ask.
Hi , did you flashed 4 files on Odin ? and Did you tried to flash with Samsung Smart Swich ?
https://www.youtube.com/watch?v=9QhJngOuLQ4
Teddy Lo said:
Hi , did you flashed 4 files on Odin ? and Did you tried to flash with Samsung Smart Swich ?
https://www.youtube.com/watch?v=9QhJngOuLQ4
Click to expand...
Click to collapse
Yes, I did flash all 4 files (BL, CSC, AP and something else as described in odin).
I did try the Smart Switch recuperation feature but it didn't gave me any option, then after flashing with Odin, I did retry once the phone has completed his turn on ignition, it just gave me a feature to upgrade the phone.
The Emergency Software Recovery and Initialization you need manualy to do like in that video , first you need to put your phone in download mode .
Because you say that screen is black hold just power button for about 10 second to make sure your device is off , then Hold vol - Home and Power to enter in Download mode for bout 7 second and then release power button , wait just litle and then press vol + like for odin flash and then try The Emergency Software Recovery and Initialization. If it Doesn't work try with old version of firmware to flash , if you are able after that to enter in to recovery Wipe Cache Partition and Reboot your phone.
Teddy Lo said:
The Emergency Software Recovery and Initialization you need manualy to do like in that video , first you need to put your phone in download mode .
Because you say that screen is black hold just power button for about 10 second to make sure your device is off , then Hold vol - Home and Power to enter in Download mode for bout 7 second and then release power button , wait just litle and then press vol + like for odin flash and then try The Emergency Software Recovery and Initialization. If it Doesn't work try with old version of firmware to flash , if you are able after that to enter in to recovery Wipe Cache Partition and Reboot your phone.
Click to expand...
Click to collapse
The Emergency Software Recovery has been removed from Smart Switch. Sorry to say that but I can't access it.
Also, I can't enter the download mode or the recovery mode. I'll wait until the battery goes empty, and then, will try to charge it to see if it changes anything.
ChupaXL said:
The Emergency Software Recovery has been removed from Smart Switch. Sorry to say that but I can't access it.
Also, I can't enter the download mode or the recovery mode. I'll wait until the battery goes empty, and then, will try to charge it to see if it changes anything.
Click to expand...
Click to collapse
You can try that , but try this , press and hold just power button and plug USB on PC and your phone to see if is your device recognized as Exynos 7422 for example if it is then your Bootloader is dead .
Teddy Lo said:
You can try that , but try this , press and hold just power button and plug USB on PC and your phone to see if is your device recognized as Exynos 7422 for example if it is then your Bootloader is dead .
Click to expand...
Click to collapse
I did try that but it don't give me anything. The device is not recognized.
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Teddy Lo said:
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Click to expand...
Click to collapse
I think it may be a software issue, the battery was working fine three days ago, I was working with the phone for about 5 - 6 hours without charging, it wasn't a battery problem.
Tomorrow, if letting my phone discharge and then charge doesn't work, I'll put it in charge for 3 hours.
Thanks !
Teddy Lo said:
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Click to expand...
Click to collapse
The phone worked after letting all the juice go empty and recharge it for a couple of hours. It is working now perfectly.
Thanks
I'm glad to hear that
Teddy Lo said:
I'm glad to hear that
Click to expand...
Click to collapse
It just did it again, I was downloading a file and then, the phone did make like a screen cracked and it went off another time.
Is it a software issue or a hardware issue ?
I'm not sure first what file you was downloading and how you mean like screen cracked ? Colors or what ? ( Try to do Factory Reset and do Wipe Cache Partition if the problem comes again probably you have device with hardware issue .
Here is the screenshot of my software system infos.
Also, I get a small line with grey pixels like the old TVs
Hello everyone,
I searched a lot for my problem but couldn't find any solution so I decided to post here...
I tried to update my mothers Galaxy A10s officially from the settings but after restarting and booting to blue screen which it shows percentage of installing update , install goes until 99% then it shuts down and doesn't boot up when I hold power button , I tried every combination like power + volume down or volume down then power button and etc. only the power button + volume up works which it boots the installing screen and same happens , 99% and shuts down!
I installed samsung usb driver and odin then I connected the phone holding volume up and down , the download screen for firmware shows up successfully , but here is my question , is there any way that I can update the phone without losing data on it? I'm pretty sure that the downloaded update on phone is corrupt , is there any way to replace it from computer and let it update normally?
data on the phone are really important to my mother and if I flash the phone , they are lost! so please let me know if there is any way to fix this issue , thanks
hi i encountered exactly this same issue, could you elaborate a bit more how to get the download screen for firmware? while i'm worried about data loss as well, i rather have a working phone.
fuseteam said:
hi i encountered exactly this same issue, could you elaborate a bit more how to get the download screen for firmware? while i'm worried about data loss as well, i rather have a working phone.
Click to expand...
Click to collapse
First download your phones USB driver , you can simply search Samsung Galaxy A10s USB driver in google ,
To make sure your phone is connected to your pc correctly you can also download Odin ,
Connect your phone to you PC while holding Volume up + Volume down at the same time , it should boot up to Download screen asking you to continue or restast by volume up and down ,
As I found other ppl in other threads in this forum also having same issue in recent days , seems the update package from samsung was corrupt and there is no samsung tech support in my area
yeah same here no samsung tech support as far as i know
thanks
the device is also not my device and not in my possesion so i'll need to pass along the information to a less tech savy person. i hope i don't send the wrong links
fuseteam said:
yeah same here no samsung tech support as far as i know
thanks
the device is also not my device and not in my possesion so i'll need to pass along the information to a less tech savy person. i hope i don't send the wrong links
Click to expand...
Click to collapse
Download Samsung Galaxy A10s USB Driver | All USB Drivers
Download Samsung Galaxy A10s USB Driver from here, install it in your computer and connect your device with PC or Laptop successfully.
allusbdrivers.com
skysheykh said:
Download Samsung Galaxy A10s USB Driver | All USB Drivers
Download Samsung Galaxy A10s USB Driver from here, install it in your computer and connect your device with PC or Laptop successfully.
allusbdrivers.com
Click to expand...
Click to collapse
thanks much appreciated, i'm guessing this is the official site for odin? https://odinflashtool.com/
fuseteam said:
thanks much appreciated, i'm guessing this is the official site for odin? https://odinflashtool.com/
Click to expand...
Click to collapse
I'm not sure but looks legit
skysheykh said:
I'm not sure but looks legit
Click to expand...
Click to collapse
use this one
odin3 v3.14.1 patched.zip | by kushpr for Galaxy A32 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Hey Guys this fix is really simple but will not retain any data unless if you have a backup first step is to install ssung drivers to your pc. 2 Download latest version odin https://odin-samsung.com/odin-3-14-4-odin-download-all-versions-for-samsung-flash.html
3 Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M
Download version the first version Binary 5 fiware
3 extract firmware
4 Load onto odin BL, AP, CP, CSC
5 HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6 Press Start and Flash
7 Setup device and Enjoy PLEASE DO NOT ALLOW UPDATES TO INSTALL UNLESSS SAMSUNG FIXES THE UPDATE.
skysheykh said:
Hello everyone,
I searched a lot for my problem but couldn't find any solution so I decided to post here...
I tried to update my mothers Galaxy A10s officially from the settings but after restarting and booting to blue screen which it shows percentage of installing update , install goes until 99% then it shuts down and doesn't boot up when I hold power button , I tried every combination like power + volume down or volume down then power button and etc. only the power button + volume up works which it boots the installing screen and same happens , 99% and shuts down!
I installed samsung usb driver and odin then I connected the phone holding volume up and down , the download screen for firmware shows up successfully , but here is my question , is there any way that I can update the phone without losing data on it? I'm pretty sure that the downloaded update on phone is corrupt , is there any way to replace it from computer and let it update normally?
data on the phone are really important to my mother and if I flash the phone , they are lost! so please let me know if there is any way to fix this issue
Click to expand...
Click to collapse
skysheykh said:
Hello everyone,
I searched a lot for my problem but couldn't find any solution so I decided to post here...
I tried to update my mothers Galaxy A10s officially from the settings but after restarting and booting to blue screen which it shows percentage of installing update , install goes until 99% then it shuts down and doesn't boot up when I hold power button , I tried every combination like power + volume down or volume down then power button and etc. only the power button + volume up works which it boots the installing screen and same happens , 99% and shuts down!
I installed samsung usb driver and odin then I connected the phone holding volume up and down , the download screen for firmware shows up successfully , but here is my question , is there any way that I can update the phone without losing data on it? I'm pretty sure that the downloaded update on phone is corrupt , is there any way to replace it from computer and let it update normally?
data on the phone are really important to my mother and if I flash the phone , they are lost! so please let me know if there is any way to fix this issue , thanks
Click to expand...
Click to collapse
Hey Guys this fix is really simple but will not retain any data unless if you have a backup first step is to install ssung drivers to your pc. 2 Download latest version odin https://odin-samsung.com/odin-3-14-4-odin-download-all-versions-for-samsung-flash.html
3 Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M
Download version the first version Binary 5 fiware
3 extract firmware
4 Load onto odin BL, AP, CP, CSC
5 HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6 Press Start and Flash
7 Setup device and Enjoy PLEASE DO NOT ALLOW UPDATES TO INSTALL UNLESSS SAMSUNG FIXES THE UPDATE.
For data recovery while flashing is not to flash device with CSC file Flash Device USING BL, AP, CP, & HOME CSC DOWNLOAD AN FLASH THE LAST VERSION OF RELEASED FIRMWARE ON WEBSITE
PRE-CAUTION NOT TESTED ON NEW DEVICES BUT WORKED FORE ON OLDER DEVICES I HAD FLASHED DEVICES WITHOUT LOSING DATA USING THAT METHOD
Gsm.Repairs said:
Hey Guys this fix is really simple but will not retain any data unless if you have a backup first step is to install ssung drivers to your pc. 2 Download latest version odin https://odin-samsung.com/odin-3-14-4-odin-download-all-versions-for-samsung-flash.html
3 Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M
Download version the first version Binary 5 fiware
3 extract firmware
4 Load onto odin BL, AP, CP, CSC
5 HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6 Press Start and Flash
7 Setup device and Enjoy PLEASE DO NOT ALLOW UPDATES TO INSTALL UNLESSS SAMSUNG FIXES THE UPDATE.
ANY FURTHER ASSISTANCE: [email protected]
Whatsapp: +1868 286-4500
For data recovery while flashing is not to flash device with CSC file Flash Device USING BL, AP, CP, & HOME CSC DOWNLOAD AN FLASH THE LAST VERSION OF RELEASED FIRMWARE ON WEBSITE
PRE-CAUTION NOT TESTED ON NEW DEVICES BUT WORKED FORE ON OLDER DEVICES I HAD FLASHED DEVICES WITHOUT LOSING DATA USING THAT METHOD
Click to expand...
Click to collapse
Thanks for your help , yeah I know how to flash the device , but this was really strange happening since we did official samsung update and broke the firmware so we weren't prepared to get backup first since they are legit updates and we put our trust in samsung and their testing before releasing updates , now I know they have really poor testing on their softwares before release , I can flash but it will delete all the data and pictures on my mothers phone ....
Hi all,
any news about this problem, because i'm in the same situation as u ... and by the same raison
iliess95 said:
Hi all,
any news about this problem, because i'm in the same situation as u ... and by the same raison
Click to expand...
Click to collapse
I just found the solution and fixed it! , no data is corrupt and its working like a charm.
To fix follow these instructions:
1. First download your phone firmware (
Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M )
*Note: Find your own phones build number , there is no way to find out just to try one of them and see if you get an error or not, if you get the error you have downloaded the wrong firmware and it will show you the correct build number in download mode. (Their partition table size is also different)
2. Download pit file from this link: https://gsm-flash.com/samsung-galaxy-a10s-pit-file-download-a107/
(A107M or A107F)
3. Load onto odin BL, AP, CP, HOME_CSC (*ITS IMPORTANT TO SELECT HOME_CSC NOT CSC OTHERWISE YOUR DATA WILL BE LOST*)
4. In Pit tab , attach the pit file you just downloaded from the link above. next make sure in option tab , re.partition check box is checked.
5. HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6. Press Start and Flash
Enjoy!
* My phone version was A107F. and build number A107FXXU8CUG1
skysheykh said:
Thanks for your help , yeah I know how to flash the device , but this was really strange happening since we did official samsung update and broke the firmware so we weren't prepared to get backup first since they are legit updates and we put our trust in samsung and their testing before releasing updates
Click to expand...
Click to collapse
Encountering problems when doing an OTA update is *very* common - on ALL models. It doesn't mean that the update wasn't tested, and it doesn't mean that every single user is going to get the same issue. It just happens because technology isn't perfect. That's why it's your responsibility to keep your data backed up at all times