Hi everyone ! I appreciate this forum very much since we do help each other here. So thanks in advance !
I've recently got a Samsung GS7 which was a carrier operator based system (Orange France) and recently, it gave me a bootloader error. I did reflash the bootloader with a newer version and also the system (Android 7.0 FTM) via Odin, all was working perfectly till I downloaded Antutu and tried the benchmarking, when the system went to the CPU multithread, the phone did reboot and when it started, I uninstalled that application to avoid problems. Then, the phone didn't want to reboot afterwhile.
I'm blocked with a black screen and all keys combination doesn't work.
I really need help. It's a G930F. If you need any information; just ask.
Hi , did you flashed 4 files on Odin ? and Did you tried to flash with Samsung Smart Swich ?
https://www.youtube.com/watch?v=9QhJngOuLQ4
Teddy Lo said:
Hi , did you flashed 4 files on Odin ? and Did you tried to flash with Samsung Smart Swich ?
https://www.youtube.com/watch?v=9QhJngOuLQ4
Click to expand...
Click to collapse
Yes, I did flash all 4 files (BL, CSC, AP and something else as described in odin).
I did try the Smart Switch recuperation feature but it didn't gave me any option, then after flashing with Odin, I did retry once the phone has completed his turn on ignition, it just gave me a feature to upgrade the phone.
The Emergency Software Recovery and Initialization you need manualy to do like in that video , first you need to put your phone in download mode .
Because you say that screen is black hold just power button for about 10 second to make sure your device is off , then Hold vol - Home and Power to enter in Download mode for bout 7 second and then release power button , wait just litle and then press vol + like for odin flash and then try The Emergency Software Recovery and Initialization. If it Doesn't work try with old version of firmware to flash , if you are able after that to enter in to recovery Wipe Cache Partition and Reboot your phone.
Teddy Lo said:
The Emergency Software Recovery and Initialization you need manualy to do like in that video , first you need to put your phone in download mode .
Because you say that screen is black hold just power button for about 10 second to make sure your device is off , then Hold vol - Home and Power to enter in Download mode for bout 7 second and then release power button , wait just litle and then press vol + like for odin flash and then try The Emergency Software Recovery and Initialization. If it Doesn't work try with old version of firmware to flash , if you are able after that to enter in to recovery Wipe Cache Partition and Reboot your phone.
Click to expand...
Click to collapse
The Emergency Software Recovery has been removed from Smart Switch. Sorry to say that but I can't access it.
Also, I can't enter the download mode or the recovery mode. I'll wait until the battery goes empty, and then, will try to charge it to see if it changes anything.
ChupaXL said:
The Emergency Software Recovery has been removed from Smart Switch. Sorry to say that but I can't access it.
Also, I can't enter the download mode or the recovery mode. I'll wait until the battery goes empty, and then, will try to charge it to see if it changes anything.
Click to expand...
Click to collapse
You can try that , but try this , press and hold just power button and plug USB on PC and your phone to see if is your device recognized as Exynos 7422 for example if it is then your Bootloader is dead .
Teddy Lo said:
You can try that , but try this , press and hold just power button and plug USB on PC and your phone to see if is your device recognized as Exynos 7422 for example if it is then your Bootloader is dead .
Click to expand...
Click to collapse
I did try that but it don't give me anything. The device is not recognized.
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Teddy Lo said:
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Click to expand...
Click to collapse
I think it may be a software issue, the battery was working fine three days ago, I was working with the phone for about 5 - 6 hours without charging, it wasn't a battery problem.
Tomorrow, if letting my phone discharge and then charge doesn't work, I'll put it in charge for 3 hours.
Thanks !
Teddy Lo said:
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Click to expand...
Click to collapse
The phone worked after letting all the juice go empty and recharge it for a couple of hours. It is working now perfectly.
Thanks
I'm glad to hear that
Teddy Lo said:
I'm glad to hear that
Click to expand...
Click to collapse
It just did it again, I was downloading a file and then, the phone did make like a screen cracked and it went off another time.
Is it a software issue or a hardware issue ?
I'm not sure first what file you was downloading and how you mean like screen cracked ? Colors or what ? ( Try to do Factory Reset and do Wipe Cache Partition if the problem comes again probably you have device with hardware issue .
Here is the screenshot of my software system infos.
Also, I get a small line with grey pixels like the old TVs
Related
Hello
I have the next issue
I have a Samsung Galaxy Europa GT-I5500
And it bricked when I closed odin 4.36 after, when the phone was in downloading mode due that there was no completion. I wanted to install a newer version of the clockwork (mod) recovery.
I installed an old version but was unable to install the CyanogenMod (hte one from psyke83) that I wanted. And after I wanted to try a newer version of the clockwork (mod).
And now the phone is with the PC---to Phone icon brick mode.
I tried the volume down + main button + power off and isn't working
Also i tried to run the one click unbrick and isn't able to connect to the phone. Seems that the phone doesn't reach the computer
I tried an usb list (lsusb) in the ubuntu and does appear if i connect it.
I tried both in windows 7 and ubuntu
Do you think is a softbrick? Any clues? recomendations or questions for more details
did you find any solution..
i have no warranty since it as directly imported..i have the same problem ..
i was trying to backup my rom when it bricked.. (using rom manager) .... i tried volume down + home + power button (disconnect button) but nothings showed up.
sjehanzeb said:
did you find any solution..
i have no warranty since it as directly imported..i have the same problem ..
i was trying to backup my rom when it bricked.. (using rom manager) .... i tried volume down + home + power button (disconnect button) but nothings showed up.
Click to expand...
Click to collapse
I had a problem with the buttons on the phone the volume down wasn't working.
What do you mean by home button the one with the home icon or the main one with the metal borders because is that button the one that you need to use.
I also tried the resitor of 301kohms between the pins 4 and 5 didn't work.
Now i have the 2.3.7 working stable at the moment
try that combination of buttons if not tell me
I am pretty sure there is nothing you can do about it, if it is completely bricked.
And the phone won't turn on, in any case what so ever?
PurpleBunnies said:
I am pretty sure there is nothing you can do about it, if it is completely bricked.
And the phone won't turn on, in any case what so ever?
Click to expand...
Click to collapse
Depends if it is hard bricked or soft bricked. If the screens turns on and appears the PC---/!\ --- phone. The he can try to use the three key combination or the usb homemade jig. Otherwise he can try to find someone with the JTAG
search in google JTAG galaxy for more info.
sounds like a hard brick. People claim that taking the battery and sim out of the phone for 30 mins (min) and then putting back in and booting to download mode sometimes works
You could try that
MY BROTHER IS IN THE WAY YOU DOWNLOAD but equally can not install any OTHER ONE IS A STRONG BRICK
On galaxy s this also happens from time to time, even i had it once. Try if Odin possibly connects anyway and flash again, if not, remove your battery leave it out for 60 seconds and then try if you can get to download mode again. You definitely have not hardbricked your device...
--------------------------
tapatalked from vizio vtab1008
ALEXIS_0071 said:
MY BROTHER IS IN THE WAY YOU DOWNLOAD but equally can not install any OTHER ONE IS A STRONG BRICK
Click to expand...
Click to collapse
What?
Sent from my GT-I5500 using Tapatalk
Got same problem
Jordanooo said:
sounds like a hard brick. People claim that taking the battery and sim out of the phone for 30 mins (min) and then putting back in and booting to download mode sometimes works
You could try that
Click to expand...
Click to collapse
My GT i5500 Boots into Download mode but I can't seem to find all Stock firmware including CSC etc, all the links I have tried on here are dead or don't have the correct fw for my phone. I would use CFW if I knew what was good and worked but I am not to sure. Any suggestions??
The Stock firmware has the letter code of NJ**2P the stars are unknown letters or numbers but its a UK phone.
hey there, my GT-i5500L, after flashing it with odin and the stock room from sammobile and use the europa ops the phone turn on the screen for 2 secs and reboot, dont shows logo just reboot in a loop, the device manager on pc dont detect it and no matter whtar ey comb i use the download mode never start
@Casper0077
Casper0077 said:
My GT i5500 Boots into Download mode but I can't seem to find all Stock firmware including CSC etc, all the links I have tried on here are dead or don't have the correct fw for my phone. I would use CFW if I knew what was good and worked but I am not to sure. Any suggestions??
The Stock firmware has the letter code of NJ**2P the stars are unknown letters or numbers but its a UK phone.
Click to expand...
Click to collapse
Hello friend!!! You are lucky enough to still be able to get into download mode. Please check you PM box (messages). I am sending you a link you might find helpful.
Best of luck with the device, let me know if I can help more during the process.
---------- Post added at 06:59 PM ---------- Previous post was at 06:46 PM ----------
@dungeongs
dungeongs said:
hey there, my GT-i5500L, after flashing it with odin and the stock room from sammobile and use the europa ops the phone turn on the screen for 2 secs and reboot, dont shows logo just reboot in a loop, the device manager on pc dont detect it and no matter whtar ey comb i use the download mode never start
Click to expand...
Click to collapse
Did you already try: vol up, menu, power on (by this order, holding them all together in the end) ???
(It might be that for your device you should press and hold: vol down, home button, power)
Did you try taking out the battery (for 10 - 15 secs) and trying the above combination again???
Also you might find this page of interest for your case: https://forum.xda-developers.com/showthread.php?t=1734997. Credits to @neerajganga
Please take a look at your PM messages.
A last comment; in my experience, using the latest version of Odin and firmware from the links I sent you, never required extra files (like pit or any other type).
Best of luck! :good: Share how it goes!
hi guys... im gonna kill my self.. i tried wveruthing and my phone doest work.. one day my phone turn off and when i tried to turn on didnt start properly. Only show me samsung galaxy s2 then siyahkernel and thast all. it is very strange. So i tried to put in recovery mode but i cant. only in download mode but only when i connect the phone with the computer. Then i install many rom(stock, custom) succesfully but the phone is still the same like i never install any rom. So i went to SAT but i live in argentina and they couldnt help me... thats kind of funny.. they must repair the phone because is SAT .. but they didnt. so.. i dont know waht to do. should i try a jig ? i read somewhere that it could be that sd internal is broken? i hope u can help me
We need a lot more info. What did you flash, how did you flash it. Where did you get the firmware. I ask the last question because according to your profile, you just created this account today. Which tells me you got the firmware elsewhere.
Sent from my SGH-I777 using xda premium
lok1to said:
hi guys... im gonna kill my self.. i tried wveruthing and my phone doest work.. one day my phone turn off and when i tried to turn on didnt start properly. Only show me samsung galaxy s2 then siyahkernel and thast all. it is very strange. So i tried to put in recovery mode but i cant. only in download mode but only when i connect the phone with the computer. Then i install many rom(stock, custom) succesfully but the phone is still the same like i never install any rom. So i went to SAT but i live in argentina and they couldnt help me... thats kind of funny.. they must repair the phone because is SAT .. but they didnt. so.. i dont know waht to do. should i try a jig ? i read somewhere that it could be that sd internal is broken? i hope u can help me
Click to expand...
Click to collapse
How did you try to enter the Recovery mode?
What key combination?
well.. i download a stock rom in a post of this forum.. then i flash with odin.. pda and then i tried with pda and pit but nothing.. its like i didnt install it.
Recovery mode --> volume up + volume down + power button. when show me samsung galaxy i keep holding and in the second boot stay in that screen of samsung and when i connect in pc the second boot the screen is black and the touch key flick
lok1to said:
well.. i download a stock rom in a post of this forum.. then i flash with odin.. pda and then i tried with pda and pit but nothing.. its like i didnt install it.
Recovery mode --> volume up + volume down + power button. when show me samsung galaxy i keep holding and in the second boot stay in that screen of samsung and when i connect in pc the second boot the screen is black and the touch key flick
Click to expand...
Click to collapse
To boot into recovery you want to release the buttons by the second Samsung logo pop-up. And don't plug into computer. That's for download mode.
Regardless, I don't see recovery being much help to you if Odin is not working for you.
Is odin showing that its successfully flashing your phone? After flashing back to stock with Odin, is the siyah logo at least gone?
lok1to said:
hi guys... im gonna kill my self.. i tried wveruthing and my phone doest work.. one day my phone turn off and when i tried to turn on didnt start properly. Only show me samsung galaxy s2 then siyahkernel and thast all. it is very strange. So i tried to put in recovery mode but i cant. only in download mode but only when i connect the phone with the computer. Then i install many rom(stock, custom) succesfully but the phone is still the same like i never install any rom. So i went to SAT but i live in argentina and they couldnt help me... thats kind of funny.. they must repair the phone because is SAT .. but they didnt. so.. i dont know waht to do. should i try a jig ? i read somewhere that it could be that sd internal is broken? i hope u can help me
Click to expand...
Click to collapse
lok1to said:
well.. i download a stock rom in a post of this forum.. then i flash with odin.. pda and then i tried with pda and pit but nothing.. its like i didnt install it.
Recovery mode --> volume up + volume down + power button. when show me samsung galaxy i keep holding and in the second boot stay in that screen of samsung and when i connect in pc the second boot the screen is black and the touch key flick
Click to expand...
Click to collapse
Yes, but you need to describe everything you did and everything that happened to make you want to flash back to stock. Without knowing what caused the problem in the first place, we can't help you very much. You say you installed many roms (stock, custom). Your phone probably did not fail randomly. There is probably some event or circumstance you can think of, or change you made, just before it failed. Please be specific.
lok1to said:
well.. i download a stock rom in a post of this forum.. then i flash with odin.. pda and then i tried with pda and pit but nothing.. its like i didnt install it.
Recovery mode --> volume up + volume down + power button. when show me samsung galaxy i keep holding and in the second boot stay in that screen of samsung and when i connect in pc the second boot the screen is black and the touch key flick
Click to expand...
Click to collapse
Hold the Vol+/- & PWR button at the same time, when seeing first boot, keep holding all 3, when past 2nd boot screen, release all 3.
There's no PC involved.
welll the phone was perfectly when one day pum ! turn off and then i cant boot normally. So i try to put in recovery mode and i hold volume upvolume down+power and in the second boot when i see the samsung logo i release and nothing happend. and i see only the samsung galax logo bla bla.. when i turn on the phone normally i can see the samsung logo then de siyah kernel and stack there. if i wait some minutes its restart and do it again. I try to install with odin some stock rom and pass perfectly but the phone still show me the same. its like i didnt change anything. ahhhhhhhhhhhhhh i dont know if u understand me jajjaaj my english is not very good lol im gonna cry
is it a normal problem that when we flashed a Custom firmware on s5830i , Download mode ins't working ?
i tried flashing a custom rom on my s5830i DDXLA2 Basband version DXLF1 Acecream and razodroid , upon flashing both custom firmware everything works good but when i tried to go to download mode all i can see is BLANK SCREEN . i already tried the volume up + down + power then insert the battery but still it doesn't work . my phone also is not detected in any odin . my odin version is 1.85 and Odin3_V3.07 .
hope there is a solution with my problem thanks !
joseph.whun said:
is it a normal problem that when we flashed a Custom firmware on s5830i , Download mode ins't working ?
i tried flashing a custom rom on my s5830i DDXLA2 Basband version DXLF1 Acecream and razodroid , upon flashing both custom firmware everything works good but when i tried to go to download mode all i can see is BLANK SCREEN . i already tried the volume up + down + power then insert the battery but still it doesn't work . my phone also is not detected in any odin . my odin version is 1.85 and Odin3_V3.07 .
hope there is a solution with my problem thanks !
Click to expand...
Click to collapse
Try reset BIN COUNTER ?
joseph.whun said:
is it a normal problem that when we flashed a Custom firmware on s5830i , Download mode ins't working ?
i tried flashing a custom rom on my s5830i DDXLA2 Basband version DXLF1 Acecream and razodroid , upon flashing both custom firmware everything works good but when i tried to go to download mode all i can see is BLANK SCREEN . i already tried the volume up + down + power then insert the battery but still it doesn't work . my phone also is not detected in any odin . my odin version is 1.85 and Odin3_V3.07 .
hope there is a solution with my problem thanks !
Click to expand...
Click to collapse
Your problem sounds similar to this one. I assume when you say 'blank screen' that the screen is powered on?
Power off the phone, hold down VolUp + VolDown + Power for 4 to 5 seconds. Then release ALL AT THE SAME TIME. Now press Volume Up. Now hopefully you will be in download mode even if you can't see that you are. If it doesn't work try it again a couple of times. The reason that you have to press Volume Up is that a warning screen is actually displayed before the phone lets you into download mode.
The phone will give you no other indication that its in download mode and won't 'recognise Odin' when not in download mode. Make sure you have Samsung USB drivers (comes with Samsung Kies) installed on your PC.
Oh yeah and by the way the thread I've linked to suggests you have to reflash the bootloader to fix the 'blank screen' problem.
gonna
makeyourself said:
Your problem sounds similar to this one. I assume when you say 'blank screen' that the screen is powered on?
Power off the phone, hold down VolUp + VolDown + Power for 4 to 5 seconds. Then release ALL AT THE SAME TIME. Now press Volume Up. Now hopefully you will be in download mode even if you can't see that you are. If it doesn't work try it again a couple of times. The reason that you have to press Volume Up is that a warning screen is actually displayed before the phone lets you into download mode.
The phone will give you no other indication that its in download mode and won't 'recognise Odin' when not in download mode. Make sure you have Samsung USB drivers (comes with Samsung Kies) installed on your PC.
Oh yeah and by the way the thread I've linked to suggests you have to reflash the bootloader to fix the 'blank screen' problem.
Click to expand...
Click to collapse
it works sir ! thanks , but by the way is it ok to reflash the bootloader even im running a custom firmware ( Ace Cream 1.4 )
joseph.whun said:
it works sir ! thanks , but by the way is it ok to reflash the bootloader even im running a custom firmware ( Ace Cream 1.4 )
Click to expand...
Click to collapse
makeyourself said:
Your problem sounds similar to this one. I assume when you say 'blank screen' that the screen is powered on?
Power off the phone, hold down VolUp + VolDown + Power for 4 to 5 seconds. Then release ALL AT THE SAME TIME. Now press Volume Up. Now hopefully you will be in download mode even if you can't see that you are. If it doesn't work try it again a couple of times. The reason that you have to press Volume Up is that a warning screen is actually displayed before the phone lets you into download mode.
The phone will give you no other indication that its in download mode and won't 'recognise Odin' when not in download mode. Make sure you have Samsung USB drivers (comes with Samsung Kies) installed on your PC.
Oh yeah and by the way the thread I've linked to suggests you have to reflash the bootloader to fix the 'blank screen' problem.
Click to expand...
Click to collapse
Thank you very much sir u just solve my problem
and ummm can u give a link for bootloader...???
Timmy.G said:
Thank you very much sir u just solve my problem
and ummm can u give a link for bootloader...???
Click to expand...
Click to collapse
Hi there,
if you have any doubt or a query in future, then please ask it in the Q&A section ....and also have a look at the FORUM RULES ....better luck next time
REPORTED
Thank you,
P.007
I tried rooting my LG Optimus L3 E400, and it was successful, so I tried installing CM9 . . . I followed the instructions and it went well . . . but on the part where this robot thing with the blasting blue background appeared . . . it took a long time for it to boot . So I decided to remove the battery since it won't turn off . Then I when I turned it on, the robot booting logo continued . Then I tried turned on normally, but the graphics had a high saturation and the fonts weren't clear anymore . The Superuser was removed, but the ROM Manager was still there . Then I tried KDZ update thing but I always get this error ' Upgrade error WParam: 100, LParam: 6 ' . It said that it would make my phone boot normally, but it didn't . Now I can't charge, the USB logo won't appear, and ask me which USB connection mode to choose .
Got a possible solution!
kayeeah said:
I tried rooting my LG Optimus L3 E400, and it was successful, so I tried installing CM9 . . . I followed the instructions and it went well . . . but on the part where this robot thing with the blasting blue background appeared . . . it took a long time for it to boot . So I decided to remove the battery since it won't turn off . Then I when I turned it on, the robot booting logo continued . Then I tried turned on normally, but the graphics had a high saturation and the fonts weren't clear anymore . The Superuser was removed, but the ROM Manager was still there . Then I tried KDZ update thing but I always get this error ' Upgrade error WParam: 100, LParam: 6 ' . It said that it would make my phone boot normally, but it didn't . Now I can't charge, the USB logo won't appear, and ask me which USB connection mode to choose .
Click to expand...
Click to collapse
Well , i got the sam problem at the moment , and i've been searching the internet for days now to find how to fix it... since i'm not very experienced i can't just go to modifying something in my phone but completely change the rom. With my previous experience with an LG P500 i've found a very good solution using KDZ installer so i've jut googled KDZ LG L3 and apparently it will work on L3 too ... Now i dont know if i'm allowed to post a link , but anyway even with ban it will be worthy if it helps you. The LINK* wow i'm new so i cant post outside links* or if it doesn't work (this is the direct link) : (lg-phones.org/lg-optimus-l3-v10d-firmware-download.html) put www before.
Good Luck! I'm trying this method on my own right now.
mircea98ro said:
Well , i got the sam problem at the moment , and i've been searching the internet for days now to find how to fix it... since i'm not very experienced i can't just go to modifying something in my phone but completely change the rom. With my previous experience with an LG P500 i've found a very good solution using KDZ installer so i've jut googled KDZ LG L3 and apparently it will work on L3 too ... Now i dont know if i'm allowed to post a link , but anyway even with ban it will be worthy if it helps you. The LINK* wow i'm new so i cant post outside links* or if it doesn't work (this is the direct link) : (lg-phones.org/lg-optimus-l3-v10d-firmware-download.html) put www before.
Good Luck! I'm trying this method on my own right now.
Click to expand...
Click to collapse
Uhm, I don't quite understand the instructions . . . can you help me out ?
Is it your USB cable that's broken? Can your computer still detect the phone? And most importantly can you still turn the phone on?
Bloodscythe said:
Is it your USB cable that's broken? Can your computer still detect the phone? And most importantly can you still turn the phone on?
Click to expand...
Click to collapse
No, my friend had an LG Optimus L5 . . . she borrowed my charger yesterday and it charged . . . My phone can't connect to the computer . . . and yes It can turn on . . . but the LG start up logo is broken . . . The part where there's a pink and violet wave . . . it's like a broken television signal .
Unless you can connect your phone to the computer, it'll be really tough to fix... Okay, are you able to launch these things: 1. Emergency Mode: Make sure phone is off. Hold Volume up + down + power button. You should get a yellow screen with the words emergency mode on it.
2. Can you still run Clockworkmod recovery?
3. Try a factory reset. Volume up + Home button + Power button.
This ones tricky if you have CWM installed. Hold down the three buttons until the vibration comes along and quickly let go. It might take a few tries.
Bloodscythe said:
Unless you can connect your phone to the computer, it'll be really tough to fix... Okay, are you able to launch these things: 1. Emergency Mode: Make sure phone is off. Hold Volume up + down + power button. You should get a yellow screen with the words emergency mode on it.
2. Can you still run Clockworkmod recovery?
3. Try a factory reset. Volume up + Home button + Power button.
This ones tricky if you have CWM installed. Hold down the three buttons until the vibration comes along and quickly let go. It might take a few tries.
Click to expand...
Click to collapse
I can make it go to Emergency Mode . . . and yes, I can still run Clockworkmod recovery excpet for Factory Reset . When I press Volume up + Home Button + Power Button . . . it just flashes then turns off . How do you hold down three buttons ? is it Volume buttons + Home button + Power button ?
kayeeah said:
I can make it go to Emergency Mode . . . and yes, I can still run Clockworkmod recovery excpet for Factory Reset . When I press Volume up + Home Button + Power Button . . . it just flashes then turns off . How do you hold down three buttons ? is it Volume buttons + Home button + Power button ?
Click to expand...
Click to collapse
If you can still make it into emergency mode and CWM, that's good. Okay, first, go into CWM and WIPE EVERYTHING. Data, cache, dalvik cache. Wipe them all. Then, put your phone into emergency mode. Try to connect your phone to your computer and try to use the Kdz flasher again. IF this fails then download this:
http://www.shabbypenguin.com/OUDstuff/LG-E400/stockrom+.zip
And flash it in CWM. It's probably in a different country then yours but it's better than nothing.
Bloodscythe said:
If you can still make it into emergency mode and CWM, that's good. Okay, first, go into CWM and WIPE EVERYTHING. Data, cache, dalvik cache. Wipe them all. Then, put your phone into emergency mode. Try to connect your phone to your computer and try to use the Kdz flasher again. IF this fails then download this:
And flash it in CWM. It's probably in a different country then yours but it's better than nothing.
Click to expand...
Click to collapse
After wiping them all, will I reboot ?
kayeeah said:
After wiping them all, will I reboot ?
Click to expand...
Click to collapse
No. Turn off your phone then launch emergency mode.
Bloodscythe said:
No. Turn off your phone then launch emergency mode.
Click to expand...
Click to collapse
How do you use stockrom+ ?
kayeeah said:
How do you use stockrom+ ?
Click to expand...
Click to collapse
That one is kinda tough. Unless you know how to use ADB there's not really a way to get it on to your phone. Its like the CM9 installation. Just install exactly the same way as you did for CM9. Try fixing your phone with kdz flasher first. Don't forget to put in 3QCT and Emergency modes first.
Bloodscythe said:
That one is kinda tough. Unless you know how to use ADB there's not really a way to get it on to your phone. Its like the CM9 installation. Just install exactly the same way as you did for CM9. Try fixing your phone with kdz flasher first. Don't forget to put in 3QCT and Emergency modes first.
Click to expand...
Click to collapse
I clicked on Launch Software Update and it didn't work ):
Actually, are you using the CM9 rom or did you restore a backup? Also, try mounting your phone in CWM, connect your phone to computer and see if your computer picks up anything. What does it say when you launch software update anyway?
Bloodscythe said:
Actually, are you using the CM9 rom or did you restore a backup? Also, try mounting your phone in CWM, connect your phone to computer and see if your computer picks up anything. What does it say when you launch software update anyway?
Click to expand...
Click to collapse
Yes, and I dunno how to mount CWM . . . and It says the same error . . . Param: 6 . . .
In CWM, there is a menu named mounts and storage. In there will be a sub menu called mount USB storage. Go into it. You'll see the only option in there is BACK. At this point, connect phone to computer. See if you have connection. I have to ask, do you know how to use KDZ flasher. Please tell me step by step as to what you did.
Hi!
My LG L3 E400 is bricked. When i try to turn it on,it vibrates and the LG logo appears and thats it. Hard reset,recovery mode or anything else is not possible to do. The only thing i can do is emergency mode. I was trying with software update kdz with stock .kdz files (V10G_00.kdz and V10A_00.kdz) but i got an error (Wparam 100 Lparam 2) Same thing on two different computers (Xp and 7,drivers installed...).
Is there any other way to make him alive?
Sorry for my bad English. :good:
kayeeah said:
After wiping them all, will I reboot ?
Click to expand...
Click to collapse
I cant get in clockworkmod... What should I do?
Hello i have a lg e400r and iam try to flash firmware v10N_00.kdz with kdz updater
and i hqve problems i cant flash firmware the kdz show me error on 99percent the phone reatarts and it stays on lg logo and a white screen dont boot normaly
i cant get to cmw and i cant do a hard reset but the phone it turn on
what i need to do to fix it??
Anyone an idea.?
I have a Samsung Tab 3 10.1" GT-P5210 that gets stuck at the Samsung Logo with the electric blue pulsing shadow.
Please can anyone help me to fix this.
I've tried the standard three button options but they didn't do anything and I've even tried unplugging the battery but still nothing
Any help or advice would be muchly appreciated
Many thanks
Try to flash Stock firmware with odin :
https://odindownload.com/download/Odin3_v3.12.3.zip
Search firmware for your region:
https://updato.com/firmware-archive-select-model?exact=1&q=GT-P5210
-Make sure your battery is charged over 50% better is to put him on charge for about 2 hours if you are not sure .
-Run odin with Administator and put Firmware inside AP and wait for end of importing
-Put your phone in Download mode wait for drivers to be installed
-Once your COM port is open , click Start
Good Luck
many thanks , will try again
Teddy Lo said:
Try to flash Stock firmware with odin :
Search firmware for your region:
-Make sure your battery is charged over 50% better is to put him on charge for about 2 hours if you are not sure .
-Run odin with Administator and put Firmware inside AP and wait for end of importing
-Put your phone in Download mode wait for drivers to be installed
-Once your COM port is open , click Start
Good Luck
Click to expand...
Click to collapse
My device is a tablet though and it is locked up in early boot mode so opening com port is possibly a hurdle, but many thanks, I will keep trying
Teddy Lo said:
Try to flash Stock firmware with odin :
https://odindownload.com/download/Odin3_v3.12.3.zip
Search firmware for your region:
https://updato.com/firmware-archive-select-model?exact=1&q=GT-P5210
-Make sure your battery is charged over 50% better is to put him on charge for about 2 hours if you are not sure .
-Run odin with Administator and put Firmware inside AP and wait for end of importing
-Put your phone in Download mode wait for drivers to be installed
-Once your COM port is open , click Start
Good Luck
Click to expand...
Click to collapse
Many thanks Teddy Lo
I'm struggling to find the firmware for my region, please can you advise me of any way I might achieve this please?
Also it is a Tablet not a phone and it's locked on the SAMSUNG screen is it possible to put it in Download mode and how do I open my COM port please?
Many thanks
Noggin The Gog said:
Many thanks Teddy Lo
I'm struggling to find the firmware for my region, please can you advise me of any way I might achieve this please?
Also it is a Tablet not a phone and it's locked on the SAMSUNG screen is it possible to put it in Download mode and how do I open my COM port please?
Many thanks
Click to expand...
Click to collapse
From your imei you can find in which country it is sold.
Go to imei.info and check go to more details to be check then you will see information you need.
To have open port you have to put your device in Download mode.
To do that , make sure your device is off if it will not turn off just hold long power button .
Now press all together Vol - , Home button and Power button at the same time and hold until you fell vibration or first logo , then fast release just Power button , now Downloading Screen will show up on your screen , relase all buttons now and press one time Vol + to confirm Download mode .
Now connect your device on your pc , wait for drivers to be installed and flash with Odin .
If for some reason you can't enter in to Download mode , you can try with USB jig .
You have here how it looks :
http://www.ebay.co.uk/bhp/usb-jig
Good Luck
Many, many thanks Teddy Lo
Teddy Lo said:
From your imei you can find in which country it is sold.
Go to imei.info and check go to more details to be check then you will see information you need.
To have open port you have to put your device in Download mode.
To do that , make sure your device is off if it will not turn off just hold long power button .
Now press all together Vol - , Home button and Power button at the same time and hold until you fell vibration or first logo , then fast release just Power button , now Downloading Screen will show up on your screen , relase all buttons now and press one time Vol + to confirm Download mode .
Now connect your device on your pc , wait for drivers to be installed and flash with Odin .
If for some reason you can't enter in to Download mode , you can try with USB jig .
You have here how it looks :
http://www.ebay.co.uk/bhp/usb-jig
Good Luck
Click to expand...
Click to collapse
With your muchly appreciated help I had no need for luck Teddy
I simply kept plugging away and used bits of information from various sources (mainly your though
I was in communication with Samsung but they seem to have stopped since I suggested they were admitting that the problem was of their making. Something they said in a message admitted that the Tab3 that I have is designed NOT to let you back in, ergo the situation arises in that if you don't pay, so don't play. WRONG!
With their direction to use Kies, I actually got it locked up in the 'download' screen, potentially much worse than the position I was in previously I think. Strange that Kies is their unofficial, secret software, I thought:]
Anyway I persisted and despite much moaning and groaning from 'er indoors all appears well so I thank you once again
Best Regards
Ady B