I have a Samsung Tab 3 10.1" GT-P5210 that gets stuck at the Samsung Logo with the electric blue pulsing shadow.
Please can anyone help me to fix this.
I've tried the standard three button options but they didn't do anything and I've even tried unplugging the battery but still nothing
Any help or advice would be muchly appreciated
Many thanks
Try to flash Stock firmware with odin :
https://odindownload.com/download/Odin3_v3.12.3.zip
Search firmware for your region:
https://updato.com/firmware-archive-select-model?exact=1&q=GT-P5210
-Make sure your battery is charged over 50% better is to put him on charge for about 2 hours if you are not sure .
-Run odin with Administator and put Firmware inside AP and wait for end of importing
-Put your phone in Download mode wait for drivers to be installed
-Once your COM port is open , click Start
Good Luck
many thanks , will try again
Teddy Lo said:
Try to flash Stock firmware with odin :
Search firmware for your region:
-Make sure your battery is charged over 50% better is to put him on charge for about 2 hours if you are not sure .
-Run odin with Administator and put Firmware inside AP and wait for end of importing
-Put your phone in Download mode wait for drivers to be installed
-Once your COM port is open , click Start
Good Luck
Click to expand...
Click to collapse
My device is a tablet though and it is locked up in early boot mode so opening com port is possibly a hurdle, but many thanks, I will keep trying
Teddy Lo said:
Try to flash Stock firmware with odin :
https://odindownload.com/download/Odin3_v3.12.3.zip
Search firmware for your region:
https://updato.com/firmware-archive-select-model?exact=1&q=GT-P5210
-Make sure your battery is charged over 50% better is to put him on charge for about 2 hours if you are not sure .
-Run odin with Administator and put Firmware inside AP and wait for end of importing
-Put your phone in Download mode wait for drivers to be installed
-Once your COM port is open , click Start
Good Luck
Click to expand...
Click to collapse
Many thanks Teddy Lo
I'm struggling to find the firmware for my region, please can you advise me of any way I might achieve this please?
Also it is a Tablet not a phone and it's locked on the SAMSUNG screen is it possible to put it in Download mode and how do I open my COM port please?
Many thanks
Noggin The Gog said:
Many thanks Teddy Lo
I'm struggling to find the firmware for my region, please can you advise me of any way I might achieve this please?
Also it is a Tablet not a phone and it's locked on the SAMSUNG screen is it possible to put it in Download mode and how do I open my COM port please?
Many thanks
Click to expand...
Click to collapse
From your imei you can find in which country it is sold.
Go to imei.info and check go to more details to be check then you will see information you need.
To have open port you have to put your device in Download mode.
To do that , make sure your device is off if it will not turn off just hold long power button .
Now press all together Vol - , Home button and Power button at the same time and hold until you fell vibration or first logo , then fast release just Power button , now Downloading Screen will show up on your screen , relase all buttons now and press one time Vol + to confirm Download mode .
Now connect your device on your pc , wait for drivers to be installed and flash with Odin .
If for some reason you can't enter in to Download mode , you can try with USB jig .
You have here how it looks :
http://www.ebay.co.uk/bhp/usb-jig
Good Luck
Many, many thanks Teddy Lo
Teddy Lo said:
From your imei you can find in which country it is sold.
Go to imei.info and check go to more details to be check then you will see information you need.
To have open port you have to put your device in Download mode.
To do that , make sure your device is off if it will not turn off just hold long power button .
Now press all together Vol - , Home button and Power button at the same time and hold until you fell vibration or first logo , then fast release just Power button , now Downloading Screen will show up on your screen , relase all buttons now and press one time Vol + to confirm Download mode .
Now connect your device on your pc , wait for drivers to be installed and flash with Odin .
If for some reason you can't enter in to Download mode , you can try with USB jig .
You have here how it looks :
http://www.ebay.co.uk/bhp/usb-jig
Good Luck
Click to expand...
Click to collapse
With your muchly appreciated help I had no need for luck Teddy
I simply kept plugging away and used bits of information from various sources (mainly your though
I was in communication with Samsung but they seem to have stopped since I suggested they were admitting that the problem was of their making. Something they said in a message admitted that the Tab3 that I have is designed NOT to let you back in, ergo the situation arises in that if you don't pay, so don't play. WRONG!
With their direction to use Kies, I actually got it locked up in the 'download' screen, potentially much worse than the position I was in previously I think. Strange that Kies is their unofficial, secret software, I thought:]
Anyway I persisted and despite much moaning and groaning from 'er indoors all appears well so I thank you once again
Best Regards
Ady B
Related
Hello
I have the next issue
I have a Samsung Galaxy Europa GT-I5500
And it bricked when I closed odin 4.36 after, when the phone was in downloading mode due that there was no completion. I wanted to install a newer version of the clockwork (mod) recovery.
I installed an old version but was unable to install the CyanogenMod (hte one from psyke83) that I wanted. And after I wanted to try a newer version of the clockwork (mod).
And now the phone is with the PC---to Phone icon brick mode.
I tried the volume down + main button + power off and isn't working
Also i tried to run the one click unbrick and isn't able to connect to the phone. Seems that the phone doesn't reach the computer
I tried an usb list (lsusb) in the ubuntu and does appear if i connect it.
I tried both in windows 7 and ubuntu
Do you think is a softbrick? Any clues? recomendations or questions for more details
did you find any solution..
i have no warranty since it as directly imported..i have the same problem ..
i was trying to backup my rom when it bricked.. (using rom manager) .... i tried volume down + home + power button (disconnect button) but nothings showed up.
sjehanzeb said:
did you find any solution..
i have no warranty since it as directly imported..i have the same problem ..
i was trying to backup my rom when it bricked.. (using rom manager) .... i tried volume down + home + power button (disconnect button) but nothings showed up.
Click to expand...
Click to collapse
I had a problem with the buttons on the phone the volume down wasn't working.
What do you mean by home button the one with the home icon or the main one with the metal borders because is that button the one that you need to use.
I also tried the resitor of 301kohms between the pins 4 and 5 didn't work.
Now i have the 2.3.7 working stable at the moment
try that combination of buttons if not tell me
I am pretty sure there is nothing you can do about it, if it is completely bricked.
And the phone won't turn on, in any case what so ever?
PurpleBunnies said:
I am pretty sure there is nothing you can do about it, if it is completely bricked.
And the phone won't turn on, in any case what so ever?
Click to expand...
Click to collapse
Depends if it is hard bricked or soft bricked. If the screens turns on and appears the PC---/!\ --- phone. The he can try to use the three key combination or the usb homemade jig. Otherwise he can try to find someone with the JTAG
search in google JTAG galaxy for more info.
sounds like a hard brick. People claim that taking the battery and sim out of the phone for 30 mins (min) and then putting back in and booting to download mode sometimes works
You could try that
MY BROTHER IS IN THE WAY YOU DOWNLOAD but equally can not install any OTHER ONE IS A STRONG BRICK
On galaxy s this also happens from time to time, even i had it once. Try if Odin possibly connects anyway and flash again, if not, remove your battery leave it out for 60 seconds and then try if you can get to download mode again. You definitely have not hardbricked your device...
--------------------------
tapatalked from vizio vtab1008
ALEXIS_0071 said:
MY BROTHER IS IN THE WAY YOU DOWNLOAD but equally can not install any OTHER ONE IS A STRONG BRICK
Click to expand...
Click to collapse
What?
Sent from my GT-I5500 using Tapatalk
Got same problem
Jordanooo said:
sounds like a hard brick. People claim that taking the battery and sim out of the phone for 30 mins (min) and then putting back in and booting to download mode sometimes works
You could try that
Click to expand...
Click to collapse
My GT i5500 Boots into Download mode but I can't seem to find all Stock firmware including CSC etc, all the links I have tried on here are dead or don't have the correct fw for my phone. I would use CFW if I knew what was good and worked but I am not to sure. Any suggestions??
The Stock firmware has the letter code of NJ**2P the stars are unknown letters or numbers but its a UK phone.
hey there, my GT-i5500L, after flashing it with odin and the stock room from sammobile and use the europa ops the phone turn on the screen for 2 secs and reboot, dont shows logo just reboot in a loop, the device manager on pc dont detect it and no matter whtar ey comb i use the download mode never start
@Casper0077
Casper0077 said:
My GT i5500 Boots into Download mode but I can't seem to find all Stock firmware including CSC etc, all the links I have tried on here are dead or don't have the correct fw for my phone. I would use CFW if I knew what was good and worked but I am not to sure. Any suggestions??
The Stock firmware has the letter code of NJ**2P the stars are unknown letters or numbers but its a UK phone.
Click to expand...
Click to collapse
Hello friend!!! You are lucky enough to still be able to get into download mode. Please check you PM box (messages). I am sending you a link you might find helpful.
Best of luck with the device, let me know if I can help more during the process.
---------- Post added at 06:59 PM ---------- Previous post was at 06:46 PM ----------
@dungeongs
dungeongs said:
hey there, my GT-i5500L, after flashing it with odin and the stock room from sammobile and use the europa ops the phone turn on the screen for 2 secs and reboot, dont shows logo just reboot in a loop, the device manager on pc dont detect it and no matter whtar ey comb i use the download mode never start
Click to expand...
Click to collapse
Did you already try: vol up, menu, power on (by this order, holding them all together in the end) ???
(It might be that for your device you should press and hold: vol down, home button, power)
Did you try taking out the battery (for 10 - 15 secs) and trying the above combination again???
Also you might find this page of interest for your case: https://forum.xda-developers.com/showthread.php?t=1734997. Credits to @neerajganga
Please take a look at your PM messages.
A last comment; in my experience, using the latest version of Odin and firmware from the links I sent you, never required extra files (like pit or any other type).
Best of luck! :good: Share how it goes!
Hey guy, i was running on my sgs2 I9100XXKPA_I9100OXAKPA_OXA .. I dont know if I was mistaken when filling in the space Odin .. Now my device can not be in charge, could not be detected by the pc, and the screen is black(no symbol n icon) .. when I press the button on my device does not respond .. what happened to my device and what should I do .. helpppppp me please guys ... now I'm under stress ...
weylls said:
Hey guy, i was running on my sgs2 I9100XXKPA_I9100OXAKPA_OXA .. I dont know if I was mistaken when filling in the space Odin .. Now my device can not be in charge, could not be detected by the pc, and the screen is black(no symbol n icon) .. when I press the button on my device does not respond .. what happened to my device and what should I do .. helpppppp me please guys ... now I'm under stress ...
Click to expand...
Click to collapse
are you trying to root your phone
yeah I'm trying to root a device .. but now it has not work and a black screen .. I tried to on but does not work ..
Try and get into download mode. Make sure the phone is switched off (pull the battery out for a minute then put it back in). Then press the volume down & home buttons & keep holding them down. At the same time press the power button until you boot into download mode.
If you can get into download mode, connect your phone to PC via USB & start Odin. Check Windoze Task Manager & make sure Kies isn't open. If it is, close Kies & it's associated processes. Now, if Odin recognises your phone & you have COM highlighted in yellow, you should be able to fix it.
At this stage, download stock firmware from Samfirmware if you haven't already. From there, flash the stock firmware in Odin and follow whatever instructions Samfirmware have for flashing firmware downloaded from their site (important).
Now...If you can't get into download mode, you can try a jig. If the jig doesn't work, you'll either need to get a JTAG repair done, or send it in to Samsung/your carrier for repair.
weylls said:
Hey guy, i was running on my sgs2 I9100XXKPA_I9100OXAKPA_OXA .. I dont know if I was mistaken when filling in the space Odin .. Now my device can not be in charge, could not be detected by the pc, and the screen is black(no symbol n icon) .. when I press the button on my device does not respond .. what happened to my device and what should I do .. helpppppp me please guys ... now I'm under stress ...
Click to expand...
Click to collapse
Ok. What file/s were you using in Odin and what did you put where?
I think I've heard of similar things happen before when flashing galaxy s firmware on an S2.
As MB said, your only chance is to get download mode working before having to send it off.
Sent from my GT-I9100T
thanks 4 advices..
I have sent to the repairer .. he said I was burning device ic .. is it reasonable?
That does not make sense .
Burning device what with blowtorch .
jje
thanks
on the night of the incident I have been waiting a long time to flash, and the triangle symbol appears by that I have been pulling out the usb ,after it displayed the symbol + triangle + pc device .. after that I can return to the download mode .. but after the inclusion of Odin file, device keep does not work, what the causes and what is his solution? thanks 4 help
weylls said:
,after it displayed the symbol + triangle + pc device ..
Click to expand...
Click to collapse
This is a forced download mode. Essentially means you have to flash a working firmware before the phone will boot.
huhhhh...
I think to send the device to Samsung, is he able to find damage caused by my error?
MistahBungle said:
Try and get into download mode. Make sure the phone is switched off (pull the battery out for a minute then put it back in). Then press the volume down & home buttons & keep holding them down. At the same time press the power button until you boot into download mode.
If you can get into download mode, connect your phone to PC via USB & start Odin. Check Windoze Task Manager & make sure Kies isn't open. If it is, close Kies & it's associated processes. Now, if Odin recognises your phone & you have COM highlighted in yellow, you should be able to fix it.
At this stage, download stock firmware from Samfirmware if you haven't already. From there, flash the stock firmware in Odin and follow whatever instructions Samfirmware have for flashing firmware downloaded from their site (important).
Now...If you can't get into download mode, you can try a jig. If the jig doesn't work, you'll either need to get a JTAG repair done, or send it in to Samsung/your carrier for repair.
Click to expand...
Click to collapse
I have tried but failed ...
I was trying to update-upgrade my S2 via Kies (everything up to date) to ICS, it got stuck at 0% an error message came up said pull out battery and connect again. Did it but nothing. A yellow triangle with black ! inbetween of a phone and a PC only appears. Tried Hard reset but nothing. can't connect to kies, can;t do anything...
Tried to look if there were is another thread like this but couldnt find.
Im a newbie in Android and as you can see I am in PANIC
any help appreciated.
is brick.you need jig usb to put in download mode for flash.
Inviato dal mio GT-I9100 usando Tapatalk
Thx for the quick reply. But how do I do-find it???
Did I do sth wrong? My fault?
You can buy it at ebay.
yeah looked it up. any other quicker solution isnt there?
volakas said:
Thx for the quick reply. But how do I do-find it???
Did I do sth wrong? My fault?
Click to expand...
Click to collapse
I would say first try getting into download mode(by pressing volume up & the power button simultaneously). After that, connect your phone to your PC,run "Odin 1.85"(just google that sentence, you will get it), after that use odin to flash a stock samsung ROM to your phone.
download this stock ROM to be used with odin :
http://skywanker.net/download/downl...9100_XEO_I9100XWLP8_I9100OXALPS_I9100XXLPS.7z
the exact details on how to flash the link I gave above to your phone is on this link:
http://forum.xda-developers.com/showthread.php?t=1075278
Good luck!!
Tried Vol up and power button but nth happend. Still Yellow triangle and black question mark....
For download mode its volume down home and power key.Try this if it goes in to download mode then follow the rest of the steps from the above post
volakas said:
Tried Vol up and power button but nth happend. Still Yellow triangle and black question mark....
Click to expand...
Click to collapse
You need to press the Home button as well.
I'd remove batteries, wait for at least 5 s. Then try entering Download mode with
(Vol Down Home, Power)
If it still won't work then you'd need to get a USB jig as noted in previous posts.
And no it is not your fault, KIES is not a very good piece of software.
Elythor said:
You need to press the Home button as well.
I'd remove batteries, wait for at least 5 s. Then try entering Download mode with
(Vol Down Home, Power)
If it still won't work then you'd need to get a USB jig as noted in previous posts.
And no it is not your fault, KIES is not a very good piece of software.
Click to expand...
Click to collapse
Tried that as well but nothing..... will go the store I bought it to see if they want any fees or else I wil order the jig and wait 3 weeks for it to arrive
volakas said:
A yellow triangle with black ! inbetween of a phone and a PC only appears.
Click to expand...
Click to collapse
Are you still getting this screen? This is a forced download mode. You can try an Odin flash from here.
apparently you are new to this so..... here it goes
1: first check you got i9100 not i9100G
2: kies told you to remove and reconnect blaa blaa so it can restore the error. if you cant manage to fix it, than easy method is like post above said. use odin.
3: read about how to use odin, close kies, download stock ROM (checkfus / sammobile ) and flash, it will be fixed.
4: no need for jig at the moment.
if ur in download mode jus use odin an c if it recognizes,yes means flash up....by the way kies is safe
Well i think i ve got I9100G, can i still use Odin?????
YES,
though search threads in this section :http://forum.xda-developers.com/forumdisplay.php?f=1550
cant you make sure or still think it is "G"
Yes it is MODEL:GT-I9100G
volakas said:
Yes it is MODEL:GT-I9100G
Click to expand...
Click to collapse
G section of the forum .
i9100 firmware will brick a G model .
jje
Well i opened ODIN put an I9100G Rom as PDA and pressed start but after half an hour it is still <ID:0/008> SetupConnection..
It's in forced download mode, it should still be coming up "COM:x" in ODIN right? You should be able to flash a recovery package from there. It should take 5 minutes at the most, not 30.
where did you get ROM from...what type of file????
Hi everyone ! I appreciate this forum very much since we do help each other here. So thanks in advance !
I've recently got a Samsung GS7 which was a carrier operator based system (Orange France) and recently, it gave me a bootloader error. I did reflash the bootloader with a newer version and also the system (Android 7.0 FTM) via Odin, all was working perfectly till I downloaded Antutu and tried the benchmarking, when the system went to the CPU multithread, the phone did reboot and when it started, I uninstalled that application to avoid problems. Then, the phone didn't want to reboot afterwhile.
I'm blocked with a black screen and all keys combination doesn't work.
I really need help. It's a G930F. If you need any information; just ask.
Hi , did you flashed 4 files on Odin ? and Did you tried to flash with Samsung Smart Swich ?
https://www.youtube.com/watch?v=9QhJngOuLQ4
Teddy Lo said:
Hi , did you flashed 4 files on Odin ? and Did you tried to flash with Samsung Smart Swich ?
https://www.youtube.com/watch?v=9QhJngOuLQ4
Click to expand...
Click to collapse
Yes, I did flash all 4 files (BL, CSC, AP and something else as described in odin).
I did try the Smart Switch recuperation feature but it didn't gave me any option, then after flashing with Odin, I did retry once the phone has completed his turn on ignition, it just gave me a feature to upgrade the phone.
The Emergency Software Recovery and Initialization you need manualy to do like in that video , first you need to put your phone in download mode .
Because you say that screen is black hold just power button for about 10 second to make sure your device is off , then Hold vol - Home and Power to enter in Download mode for bout 7 second and then release power button , wait just litle and then press vol + like for odin flash and then try The Emergency Software Recovery and Initialization. If it Doesn't work try with old version of firmware to flash , if you are able after that to enter in to recovery Wipe Cache Partition and Reboot your phone.
Teddy Lo said:
The Emergency Software Recovery and Initialization you need manualy to do like in that video , first you need to put your phone in download mode .
Because you say that screen is black hold just power button for about 10 second to make sure your device is off , then Hold vol - Home and Power to enter in Download mode for bout 7 second and then release power button , wait just litle and then press vol + like for odin flash and then try The Emergency Software Recovery and Initialization. If it Doesn't work try with old version of firmware to flash , if you are able after that to enter in to recovery Wipe Cache Partition and Reboot your phone.
Click to expand...
Click to collapse
The Emergency Software Recovery has been removed from Smart Switch. Sorry to say that but I can't access it.
Also, I can't enter the download mode or the recovery mode. I'll wait until the battery goes empty, and then, will try to charge it to see if it changes anything.
ChupaXL said:
The Emergency Software Recovery has been removed from Smart Switch. Sorry to say that but I can't access it.
Also, I can't enter the download mode or the recovery mode. I'll wait until the battery goes empty, and then, will try to charge it to see if it changes anything.
Click to expand...
Click to collapse
You can try that , but try this , press and hold just power button and plug USB on PC and your phone to see if is your device recognized as Exynos 7422 for example if it is then your Bootloader is dead .
Teddy Lo said:
You can try that , but try this , press and hold just power button and plug USB on PC and your phone to see if is your device recognized as Exynos 7422 for example if it is then your Bootloader is dead .
Click to expand...
Click to collapse
I did try that but it don't give me anything. The device is not recognized.
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Teddy Lo said:
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Click to expand...
Click to collapse
I think it may be a software issue, the battery was working fine three days ago, I was working with the phone for about 5 - 6 hours without charging, it wasn't a battery problem.
Tomorrow, if letting my phone discharge and then charge doesn't work, I'll put it in charge for 3 hours.
Thanks !
Teddy Lo said:
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Click to expand...
Click to collapse
The phone worked after letting all the juice go empty and recharge it for a couple of hours. It is working now perfectly.
Thanks
I'm glad to hear that
Teddy Lo said:
I'm glad to hear that
Click to expand...
Click to collapse
It just did it again, I was downloading a file and then, the phone did make like a screen cracked and it went off another time.
Is it a software issue or a hardware issue ?
I'm not sure first what file you was downloading and how you mean like screen cracked ? Colors or what ? ( Try to do Factory Reset and do Wipe Cache Partition if the problem comes again probably you have device with hardware issue .
Here is the screenshot of my software system infos.
Also, I get a small line with grey pixels like the old TVs
Hello everyone,
I searched a lot for my problem but couldn't find any solution so I decided to post here...
I tried to update my mothers Galaxy A10s officially from the settings but after restarting and booting to blue screen which it shows percentage of installing update , install goes until 99% then it shuts down and doesn't boot up when I hold power button , I tried every combination like power + volume down or volume down then power button and etc. only the power button + volume up works which it boots the installing screen and same happens , 99% and shuts down!
I installed samsung usb driver and odin then I connected the phone holding volume up and down , the download screen for firmware shows up successfully , but here is my question , is there any way that I can update the phone without losing data on it? I'm pretty sure that the downloaded update on phone is corrupt , is there any way to replace it from computer and let it update normally?
data on the phone are really important to my mother and if I flash the phone , they are lost! so please let me know if there is any way to fix this issue , thanks
hi i encountered exactly this same issue, could you elaborate a bit more how to get the download screen for firmware? while i'm worried about data loss as well, i rather have a working phone.
fuseteam said:
hi i encountered exactly this same issue, could you elaborate a bit more how to get the download screen for firmware? while i'm worried about data loss as well, i rather have a working phone.
Click to expand...
Click to collapse
First download your phones USB driver , you can simply search Samsung Galaxy A10s USB driver in google ,
To make sure your phone is connected to your pc correctly you can also download Odin ,
Connect your phone to you PC while holding Volume up + Volume down at the same time , it should boot up to Download screen asking you to continue or restast by volume up and down ,
As I found other ppl in other threads in this forum also having same issue in recent days , seems the update package from samsung was corrupt and there is no samsung tech support in my area
yeah same here no samsung tech support as far as i know
thanks
the device is also not my device and not in my possesion so i'll need to pass along the information to a less tech savy person. i hope i don't send the wrong links
fuseteam said:
yeah same here no samsung tech support as far as i know
thanks
the device is also not my device and not in my possesion so i'll need to pass along the information to a less tech savy person. i hope i don't send the wrong links
Click to expand...
Click to collapse
Download Samsung Galaxy A10s USB Driver | All USB Drivers
Download Samsung Galaxy A10s USB Driver from here, install it in your computer and connect your device with PC or Laptop successfully.
allusbdrivers.com
skysheykh said:
Download Samsung Galaxy A10s USB Driver | All USB Drivers
Download Samsung Galaxy A10s USB Driver from here, install it in your computer and connect your device with PC or Laptop successfully.
allusbdrivers.com
Click to expand...
Click to collapse
thanks much appreciated, i'm guessing this is the official site for odin? https://odinflashtool.com/
fuseteam said:
thanks much appreciated, i'm guessing this is the official site for odin? https://odinflashtool.com/
Click to expand...
Click to collapse
I'm not sure but looks legit
skysheykh said:
I'm not sure but looks legit
Click to expand...
Click to collapse
use this one
odin3 v3.14.1 patched.zip | by kushpr for Galaxy A32 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Hey Guys this fix is really simple but will not retain any data unless if you have a backup first step is to install ssung drivers to your pc. 2 Download latest version odin https://odin-samsung.com/odin-3-14-4-odin-download-all-versions-for-samsung-flash.html
3 Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M
Download version the first version Binary 5 fiware
3 extract firmware
4 Load onto odin BL, AP, CP, CSC
5 HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6 Press Start and Flash
7 Setup device and Enjoy PLEASE DO NOT ALLOW UPDATES TO INSTALL UNLESSS SAMSUNG FIXES THE UPDATE.
skysheykh said:
Hello everyone,
I searched a lot for my problem but couldn't find any solution so I decided to post here...
I tried to update my mothers Galaxy A10s officially from the settings but after restarting and booting to blue screen which it shows percentage of installing update , install goes until 99% then it shuts down and doesn't boot up when I hold power button , I tried every combination like power + volume down or volume down then power button and etc. only the power button + volume up works which it boots the installing screen and same happens , 99% and shuts down!
I installed samsung usb driver and odin then I connected the phone holding volume up and down , the download screen for firmware shows up successfully , but here is my question , is there any way that I can update the phone without losing data on it? I'm pretty sure that the downloaded update on phone is corrupt , is there any way to replace it from computer and let it update normally?
data on the phone are really important to my mother and if I flash the phone , they are lost! so please let me know if there is any way to fix this issue
Click to expand...
Click to collapse
skysheykh said:
Hello everyone,
I searched a lot for my problem but couldn't find any solution so I decided to post here...
I tried to update my mothers Galaxy A10s officially from the settings but after restarting and booting to blue screen which it shows percentage of installing update , install goes until 99% then it shuts down and doesn't boot up when I hold power button , I tried every combination like power + volume down or volume down then power button and etc. only the power button + volume up works which it boots the installing screen and same happens , 99% and shuts down!
I installed samsung usb driver and odin then I connected the phone holding volume up and down , the download screen for firmware shows up successfully , but here is my question , is there any way that I can update the phone without losing data on it? I'm pretty sure that the downloaded update on phone is corrupt , is there any way to replace it from computer and let it update normally?
data on the phone are really important to my mother and if I flash the phone , they are lost! so please let me know if there is any way to fix this issue , thanks
Click to expand...
Click to collapse
Hey Guys this fix is really simple but will not retain any data unless if you have a backup first step is to install ssung drivers to your pc. 2 Download latest version odin https://odin-samsung.com/odin-3-14-4-odin-download-all-versions-for-samsung-flash.html
3 Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M
Download version the first version Binary 5 fiware
3 extract firmware
4 Load onto odin BL, AP, CP, CSC
5 HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6 Press Start and Flash
7 Setup device and Enjoy PLEASE DO NOT ALLOW UPDATES TO INSTALL UNLESSS SAMSUNG FIXES THE UPDATE.
For data recovery while flashing is not to flash device with CSC file Flash Device USING BL, AP, CP, & HOME CSC DOWNLOAD AN FLASH THE LAST VERSION OF RELEASED FIRMWARE ON WEBSITE
PRE-CAUTION NOT TESTED ON NEW DEVICES BUT WORKED FORE ON OLDER DEVICES I HAD FLASHED DEVICES WITHOUT LOSING DATA USING THAT METHOD
Gsm.Repairs said:
Hey Guys this fix is really simple but will not retain any data unless if you have a backup first step is to install ssung drivers to your pc. 2 Download latest version odin https://odin-samsung.com/odin-3-14-4-odin-download-all-versions-for-samsung-flash.html
3 Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M
Download version the first version Binary 5 fiware
3 extract firmware
4 Load onto odin BL, AP, CP, CSC
5 HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6 Press Start and Flash
7 Setup device and Enjoy PLEASE DO NOT ALLOW UPDATES TO INSTALL UNLESSS SAMSUNG FIXES THE UPDATE.
ANY FURTHER ASSISTANCE: [email protected]
Whatsapp: +1868 286-4500
For data recovery while flashing is not to flash device with CSC file Flash Device USING BL, AP, CP, & HOME CSC DOWNLOAD AN FLASH THE LAST VERSION OF RELEASED FIRMWARE ON WEBSITE
PRE-CAUTION NOT TESTED ON NEW DEVICES BUT WORKED FORE ON OLDER DEVICES I HAD FLASHED DEVICES WITHOUT LOSING DATA USING THAT METHOD
Click to expand...
Click to collapse
Thanks for your help , yeah I know how to flash the device , but this was really strange happening since we did official samsung update and broke the firmware so we weren't prepared to get backup first since they are legit updates and we put our trust in samsung and their testing before releasing updates , now I know they have really poor testing on their softwares before release , I can flash but it will delete all the data and pictures on my mothers phone ....
Hi all,
any news about this problem, because i'm in the same situation as u ... and by the same raison
iliess95 said:
Hi all,
any news about this problem, because i'm in the same situation as u ... and by the same raison
Click to expand...
Click to collapse
I just found the solution and fixed it! , no data is corrupt and its working like a charm.
To fix follow these instructions:
1. First download your phone firmware (
Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M )
*Note: Find your own phones build number , there is no way to find out just to try one of them and see if you get an error or not, if you get the error you have downloaded the wrong firmware and it will show you the correct build number in download mode. (Their partition table size is also different)
2. Download pit file from this link: https://gsm-flash.com/samsung-galaxy-a10s-pit-file-download-a107/
(A107M or A107F)
3. Load onto odin BL, AP, CP, HOME_CSC (*ITS IMPORTANT TO SELECT HOME_CSC NOT CSC OTHERWISE YOUR DATA WILL BE LOST*)
4. In Pit tab , attach the pit file you just downloaded from the link above. next make sure in option tab , re.partition check box is checked.
5. HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6. Press Start and Flash
Enjoy!
* My phone version was A107F. and build number A107FXXU8CUG1
skysheykh said:
Thanks for your help , yeah I know how to flash the device , but this was really strange happening since we did official samsung update and broke the firmware so we weren't prepared to get backup first since they are legit updates and we put our trust in samsung and their testing before releasing updates
Click to expand...
Click to collapse
Encountering problems when doing an OTA update is *very* common - on ALL models. It doesn't mean that the update wasn't tested, and it doesn't mean that every single user is going to get the same issue. It just happens because technology isn't perfect. That's why it's your responsibility to keep your data backed up at all times