Related
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
yasirfaheem said:
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Me too .....
Sent from my Transformer TF101 using Tapatalk
While this isn't silicone, it may be what you are looking for. I am to interested in being able to hold both.
http://tuff-luv.com/faux-leather-bo...ablet-black.html?source=webgains&siteid=54264
yasirfaheem said:
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
I do not know of any silicone cases that can remain totally in position when the tablet is attached to the docking station HOWEVER you can just release the silicone case from the bottom of the tablet and it then fits easily into the dock BUT remember that whilst on the dock the case is bent up at the back of the tablet a little.
yasirfaheem said:
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
You mean like this? Look at pictures.
Arobase40 said:
I'm not quite sure if I understand the pictures well and how this really works ?
Is the Dock also protected by a silicone case or only the Tablet ?
Is it possible to have a retailer link or the manufacturer link for this product to have additional pictures, details and price ?
Thx
Click to expand...
Click to collapse
There's another piece for the dock. I didn't have it on, though. In fact, I just took the silicone off and put on carbon fiber skin. The silicone added probably 50 pounds to the overall weight.
It's the following skin.
http://www.overstock.com/Electronic...Soft-Gel-Case/6434147/product.html?cid=123620
Just measure very carefully and very very carefully cut out the bottom. Just use your imagination. Look at my pictures again. See how everything fits?
Arobase40 said:
Hmmm, I exercised my imagination pretty hard but couldn't find out the dock piece nor how the silicone gel skin can add "50 POUNDS" (22.68 kg) to the overall weight.
I was also searching on eBay, but couldn't find anything close to the product described on the OP...
The intention was good anyway.
Click to expand...
Click to collapse
You have a pretty crappy imagination
I think he used 2 modified skins from his link and modified both to fit the hinge and dock.
Also it looks like a decimal was misplaced lol. .50 lbs I could see.
Sent from my MB860 using Tapatalk
Spoontain said:
Also it looks like a decimal was misplaced lol. .50 lbs I could see.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Ever heard of an exaggeration to make a point?
It was more at the other guy saying he couldn't see how it could add 50lbs, but good on ya
Sent from my MB860 using Tapatalk
Hey Guys -
I know the wireless charging will work because of the Qi standard, but will the phone stay put? Any impressions from those who own it would be appreciated.
I could be wrong but I don't think its magnetic.. the back of the nexus is glass I think the orb is just a rubberized surface that "grab's" the back of the phone.. i.e. just friction holds it on... I think!
Sent from my HTC6435LVW using Tapatalk 2
Nobody has the orb yet, I think. It just now became available, with shipping withing a week. Plus the shipping time. I ordered one the first day it was available, but don't expect it before the end of next week.
Ok, they are shipping them today. Won't be long before we find out.
Sent from my HTC6435LVW using xda app-developers app
starscream86 said:
I could be wrong but I don't think its magnetic.. the back of the nexus is glass I think the orb is just a rubberized surface that "grab's" the back of the phone.. i.e. just friction holds it on... I think!
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
I'm with you on this one, because I read it would be compatible with windows 8 and htc phones. And pictures look like the two circles on top are rubber. Just what it looks like to me
I have the touchstone charger and it has magnet in it.
from what I see it is held up 80% by friction, 20% by magnetic force.
Too bad the touchstone wont work on Droid DNA otherwise I think it would be a great charging dock.
Mine will be arriving tmrw (Friday)
sent from my Droid DNA
Here is a pic of the rear case of the nexus 4. I see no magnets.
Sent from my HTC6435LVW using xda premium
We'll know soon enough. The first ones arriving tomorrow. Today, in fact. Hope I won't have to return it.
Sent from my HTC6435LVW using xda app-developers app
cmay227 said:
Here is a pic of the rear case of the nexus 4. I see no magnets.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
I also see no inductive coils.... But they're there.
Sent from my HTC6435LVW using xda app-developers app
Magnet lightly holds. The surface of the orb is quite sticky and holds it just fine by itself - the magnet is obviously less apparent with a case on.
No case:
http://i.imgur.com/dXIyszGh.jpg
http://i.imgur.com/qHEeQmBh.jpg
With Diztronic TPU case:
http://i.imgur.com/wtnGcrdh.jpg
http://i.imgur.com/5qRZhYbh.jpg
Thing is pretty awesome.
---------- Post added at 11:14 AM ---------- Previous post was at 11:13 AM ----------
Definitely not strong enough to use as a car mount though.
beddachedda said:
Magnet lightly holds. The surface of the orb is quite sticky and holds it just fine by itself - the magnet is obviously less apparent with a case on.
[/COLOR]Definitely not strong enough to use as a car mount though.
Click to expand...
Click to collapse
Good to know.
Unfortunately, Play Store won't let me order one. My address is incorrectly input but I can't change it. Keep getting error messages.
Ty for the pics of this looks awesome will be ordering 1
sent from my beastly powered viper DNA using Tapatalk 2
Works like a charm! Together they're a thing of beauty.
So there is a magnet in it? I thought it would only be the anti-slip rubber that they try and sell for car dashboards. One question, does it work with the phone horizontal? That's something my Nokia DT-910 can't do.
Azbulldog said:
So there is a magnet in it? I thought it would only be the anti-slip rubber that they try and sell for car dashboards. One question, does it work with the phone horizontal? That's something my Nokia DT-910 can't do.
Click to expand...
Click to collapse
Yes there is a magnet, yes it works with the phone in landscape.
However, it doesn't activate DreamScene or whatever it does with the N4 (also doesn't flip home screens to landscape like it does in car mode).
beddachedda said:
Yes there is a magnet, yes it works with the phone in landscape.
However, it doesn't activate DreamScene or whatever it does with the N4 (also doesn't flip home screens to landscape like it does in car mode).
Click to expand...
Click to collapse
The dream mode is a 4.2 feature so I don't think anyone expected it to be on the DNA. And on stock there isn't landscape homedscreens. You'll either need a Rom or a 3rd party launcher for that.
Sent from my HTC6435LVW using xda app-developers app
Their are no magnets.
Sent from my Nexus 7 using xda premium
HTC Wireless charging unit
cmay227 said:
Their are no magnets.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
is HTC planning to release its own Wireless charging device?
We will find out today
Sent from my HTC6435LVW using xda premium
http://www.meritline.com/usb-chargi...?hq_e=el&hq_m=2803082&hq_l=79&hq_v=47625619b2
I don't know anything about it. Just sharing.
Jack
Sent from my SM-N900P using XDA Premium 4 mobile app
midmadn said:
http://www.meritline.com/usb-chargi...?hq_e=el&hq_m=2803082&hq_l=79&hq_v=47625619b2
I don't know anything about it. Just sharing.
Jack
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's cheap enough. Only worried about whether it works with a case - both in fitment and whether the charging pin is long enough to plug in still with certain cases.
Good price but it's a cheap product from China that make me worried for my note 3.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
rEVOLVE said:
That's cheap enough. Only worried about whether it works with a case - both in fitment and whether the charging pin is long enough to plug in still with certain cases.
Click to expand...
Click to collapse
midmadn said:
http://www.meritline.com/usb-chargi...?hq_e=el&hq_m=2803082&hq_l=79&hq_v=47625619b2
I don't know anything about it. Just sharing.
Jack
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
nmhung100 said:
Good price but it's a cheap product from China that make me worried for my note 3.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just FYI, I ordered this product 2-3 weeks ago and recieved it yesterday, works great!
Krazyzzz said:
Found the same charger with lower $5.98 price:
Click to expand...
Click to collapse
That one's smaller, not designed for the Note 3, connector is also the old USB 2.0 design
That cheaper plug still works (N2 plugs, etc still work on N3 just not USB3)
However, thats making the phone stand up on its own weight almost & is puttting more stress on the plug then there really should be (hence the cheapness, bad not thought out design) I actually had a iphone 5 dock from china that I got for $4 the lightning plug snapped off from the phones free standing weight.
Ive owned those cheapy chinese docks for other phones, and...Honestly NOT worth the money even at that price. Finding one that has actual support behind the phone would be better...
nxneko said:
That cheaper plug still works (N2 plugs, etc still work on N3 just not USB3)
However, thats making the phone stand up on its own weight almost & is puttting more stress on the plug then there really should be (hence the cheapness, bad not thought out design) I actually had a iphone 5 dock from china that I got for $4 the lightning plug snapped off from the phones free standing weight.
Ive owned those cheapy chinese docks for other phones, and...Honestly NOT worth the money even at that price. Finding one that has actual support behind the phone would be better...
Click to expand...
Click to collapse
Not sure which one you have but the one posted here has back support. I use a Ringke Slim Case which perfectly snugs in the dock.
EDIT: I however just tried using my spigen bounce case and it wouldn't fit Good thing I stop using that case.
ukic said:
Not sure which one you have but the one posted here has back support. I use a Ringke Slim Case which perfectly snugs in the dock.
EDIT: I however just tried using my spigen bounce case and it wouldn't fit Good thing I stop using that case.
Click to expand...
Click to collapse
Use it without case and see what happens supportwise
Sent from my SM-N9005 using Tapatalk
nxneko said:
Use it without case and see what happens supportwise
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yep I see what your saying but I don't remove my case while charging. It works perfect for me with the kind of case I use. To each their own.
ukic said:
Yep I see what your saying but I don't remove my case while charging. It works perfect for me with the kind of case I use. To each their own.
Click to expand...
Click to collapse
Yeah going with naked phone with cheap docks are scary
:cyclops:
Just ordered mine. Pretty cheap, even if I end up not using it like most of my gadget accesories.
I just got this in the mail and figured that I would contribute a bit of a review and some pictures in case anyone has any questions.
So far my first impressions are that it feels really good in the hand. Like the original S-View cover, it should also offer some basic drop protection due to the lip that surrounds the top, bottom and exposed sides. It is also a bit thicker in the rear than the plain S-View cover. The only way it is not protected is if I happen to drop it with the case open. I use an iloome flexible glass protector in case that happens, but let's hope not. I will not go into the S-View function as that has been covered pretty well on this forum, except to say I have had no issues with it locking with the front cover folded all the way back. I have tried it so far on a Tylt Vu charger and it worked well. It did get a bit warm, but I didn't find it a cause for concern. I also have a Nokia DT-900 charger to test with at the office. I will be sure to do that and let you know if it charges well. I tested NFC using my Nexus 7 and it worked well. The biggest flaw with this cover has been addressed by Spigen. I have added the magnetic clip to it and it is very effective. I have to say this cover looks very polished and professional, especially with the clip. Overall, I find that it kills 2 birds with one stone. It adds wireless charging, without the loss of NFC or S-view and it protects the Note 3 from minor drops. I haven't seen any drop tests with the S-View but it is a more substantial case than the first effort on the GS4.
S-view cover wireless
One more picture of the inside contacts.
b00mbstc said:
One more picture of the inside contacts.
Click to expand...
Click to collapse
Hi, ive ordered this exact same setup with the Spigen Clip.. just a small question though, does the spigen magnet affect the spen?
Ive read some where that other cases with a magnetic flap sometimes affects the accuracy of the Spen
mtsingson said:
Hi, ive ordered this exact same setup with the Spigen Clip.. just a small question though, does the spigen magnet affect the spen?
Ive read some where that other cases with a magnetic flap sometimes affects the accuracy of the Spen
Click to expand...
Click to collapse
I have not seen any impact. I can hover at the edge of the screen right next to the magnet with no change in responsiveness. I think the magnet only points straight up.
Nice. I also just picked up this combo from Amazon when the price for the S View case dropped. Should be here tomorrow, very happy to get these at the new discount.
Sent from my SM-N900V using Tapatalk
harajyuks said:
Nice. I also just picked up this combo from Amazon when the price for the S View case dropped. Should be here tomorrow, very happy to get these at the new discount.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Can you please provide the link? I do not see this on Amazon.
theROMinator said:
Can you please provide the link? I do not see this on Amazon.
Click to expand...
Click to collapse
http://www.amazon.com/Samsung-Galax...&qid=1389576126&sr=8-1&keywords=S+View+note+3
Sent from my SM-N900V using Tapatalk
harajyuks said:
http://www.amazon.com/Samsung-Galax...&qid=1389576126&sr=8-1&keywords=S+View+note+3
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
That is a different case/cover. I don't think the wireless s-view cover is on amazon yet. I have only seen it on Samsung and Mobilefun.
b00mbstc said:
The is a different case/cover. I don't think the wireless s-view cover is on amazon yet. I have only seen it on Samsung and Mobilefun.
Click to expand...
Click to collapse
Miffed it. Sorry about that.
Sent from my SM-N900V using Tapatalk
Bought mine from here and due to arrive today or tomorrow. Can't wait to get it. Tried using a QI antenna but messed with SView and would only charge in one place on charger. I will let you guys know if it is worth the purchase from here or if I bought a knock off. http://www.shopblt.com/item/samsung-ef-tn900bbesta-s-view-black-wireless/samdrv_eftn900bbestah.html
Sent from my SM-N900V
OK got my wireless SView case yesterday from the above link and its the real deal. Works perfect with my Nokia Fatboy charging pad. Charges to 100% while on or off. Does not get too hot while charging. This was a great deal. I would snatch them up while they have them in stock!
Sent from my SM-N900V
I got one of the pass through Qi receivers and it's working perfectly with the regular sview case. I'm happy with the results, maybe I would've gotten this case but for what I paid to get the sane function...meh
Sent from my SM-N900V using Tapatalk
---------- Post added at 04:24 PM ---------- Previous post was at 04:24 PM ----------
harajyuks said:
I got one of the pass through Qi receivers and it's working perfectly with the regular sview case. I'm happy with the results, maybe I would've gotten this case but for what I paid to get the same function...meh
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Sent from my SM-N900V using Tapatalk
initially I bought the QI antenna but would work through case and messed up my SView window. It worked well with the regular back on it and no case but need some protection as I work in a commercial environment.
Sent from my SM-N900V
Could you show us a picture of the back side of the S-View chip?
Edit: IOW, which of these does it look like?
Sent from my SM-N900T using Tapatalk
mdorrett said:
initially I bought the QI antenna but would work through case and messed up my SView window. It worked well with the regular back on it and no case but need some protection as I work in a commercial environment.
Sent from my SM-N900V
Click to expand...
Click to collapse
CZroe said:
Could you show us a picture of the back side of the S-View chip?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
+1
Sent from my GT-N8013 using Tapatalk
Does anyone know how much thicker the wireless s view cover is compared to the normal s view cover. I can get them at the same price. I just want to add too much thickness to the phone.
Sent from my iPad using Tapatalk
Looking real pretty!
cydiamante said:
Does anyone know how much thicker the wireless s view cover is compared to the normal s view cover. I can get them at the same price. I just want to add too much thickness to the phone.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Thick enough that the camera is barely recessed instead of protruding.
Sent from my SM-N900T using Tapatalk
Just to be clear for everyone looking at this thread, the one pictured is NOT the official Wireless S-View Cover! The one pictured is the Spigen Wireless S-View Cover, not the official Samsung Wireless S-View Cover (like the thread's title reads). Just don't want anyone getting confused, as the thread's title is very misleading and should be edited.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
stanglifemike said:
Just to be clear for everyone looking at this thread, the one pictured is NOT the official Wireless S-View Cover! The one pictured is the Spigen Wireless S-View Cover, not the official Samsung Wireless S-View Cover (like the thread's title reads). Just don't want anyone getting confused, as the thread's title is very misleading and should be edited.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
Click to expand...
Click to collapse
Umm I dont think so it is the original with a spigen magnetic clip on it.
Sent from my SM-N9005 using Tapatalk
So far I only know of the official case that fits with the dock for sure.
I am sure there must be more that do.
Do any of you own a different case for this that fits in the dock?
1iam5mith said:
So far I only know of the official case that fits with the dock for sure.
I am sure there must be more that do.
Do any of you own a different case for this that fits in the dock?
Click to expand...
Click to collapse
I purchased one of these off ebay, doesn't directly fit the dock as it is but a quick trim to elongate the charging cut out slightly and it now fits if you don't use the DK36 inserts.
http://www.ebay.co.uk/itm/380876138931
Does any one know if this case fits with the dock?
http://www.expansys.com/roxfit-gel-shell-case-for-sony-xperia-z2-nero-black-258557/
It has cut outs for the magnetic charger, but I expect that the case is too thick to fit in the dock
Stalkalainen said:
Does any one know if this case fits with the dock?
http://www.expansys.com/roxfit-gel-shell-case-for-sony-xperia-z2-nero-black-258557/
It has cut outs for the magnetic charger, but I expect that the case is too thick to fit in the dock
Click to expand...
Click to collapse
As this is an officially licenced product , then it should yes...
Anyone thinking about cases and the dock, it has a removable part that, when removed, lets you insert the phone with many kinds of cases.
http://www.amazon.co.uk/Sony-DK36-Charging-Dock-Smartphone/dp/B00HWUQEZQ/ref=pd_cp_computers_0
Here you can see the "seamline" which is the removable part. It is also stated in the description. Just to let you guys know.
Stalkalainen said:
Does any one know if this case fits with the dock?
http://www.expansys.com/roxfit-gel-shell-case-for-sony-xperia-z2-nero-black-258557/
It has cut outs for the magnetic charger, but I expect that the case is too thick to fit in the dock
Click to expand...
Click to collapse
I have the case and it doesn't fit .
I would have thought a officially licenced product would fit .
Stalkalainen said:
Does any one know if this case fits with the dock?
http://www.expansys.com/roxfit-gel-shell-case-for-sony-xperia-z2-nero-black-258557/
It has cut outs for the magnetic charger, but I expect that the case is too thick to fit in the dock
Click to expand...
Click to collapse
So do we know if this case fits the dock?
kamalaggi said:
I have the case and it doesn't fit .
I would have thought a officially licenced product would fit .
Click to expand...
Click to collapse
That's disappointing I have held off ordering until I got confirmation. Looks like the eBay magnetic cable will do for now. Thanks for the response I am as disappointed as you are that this case doesn't work with the dock. Especially as the cut out are so good.
I got a Yesoo slim hard case and it fits perfect in the dk36 with the charger's case attachment.
Sent from my D6503 using XDA Premium 4 mobile app
I use Casemate Barely There for my xperia z2 and it fit perfectly. I got 2 model of adapter for my magnetic dock and it fit with the bigger one.
My tempered glass has come this day (0.3 mm thickness) and when i stick that on phone the charger doesn't fit anymore, that feel bad..
The Krussell case fits perfectly for the dk36
Sent from my D6503 using XDA Free mobile app
q
kaz0ku said:
The Krussell case fits perfectly for the dk36
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
link please
x102x96x said:
link please
Click to expand...
Click to collapse
http://www.krusell.se/en/products/details/5348/Malm-FlipCase-Stand-mfX-White-for-Sony-Xperia-Z2
Looks good too
Sent from my D6503 using XDA Free mobile app
Anyone found one yet?
Sent from my D6503 using Tapatalk
1iam5mith said:
Anyone found one yet?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
The Yesoo case on amazon fits like a charm, looks super sleek (I have the white one), and feels awesome in the hand. Couldn't think of any improvements. Fits very well in the dock.
pwnjabi1 said:
The Yesoo case on amazon fits like a charm, looks super sleek (I have the white one), and feels awesome in the hand. Couldn't think of any improvements. Fits very well in the dock.
Click to expand...
Click to collapse
Damn not on UK Amazon :/
Sent from my D6503 using Tapatalk
pwnjabi1 said:
The Yesoo case on amazon fits like a charm, looks super sleek (I have the white one), and feels awesome in the hand. Couldn't think of any improvements. Fits very well in the dock.
Click to expand...
Click to collapse
Is this with or without the inserts? I currently have a terrapin case which fits if I pull out the inserts. However, it needs to be propped up in order for the pins to work.
1iam5mith said:
Damn not on UK Amazon :/
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Not on Amazon but on eBay!
http://www.ebay.co.uk/itm/Sony-Xper...-Anti-Scratch-Premium-Hard-Case-/301208686006
Publicglutton said:
As this is an officially licenced product , then it should yes...
Click to expand...
Click to collapse
It unfortunately doesn't. I just received the gel shell and dk36 dock today and both inserts don't allow me to use the dock
Sent from my D6503 using Tapatalk
denny9unawan said:
I use Casemate Barely There for my xperia z2 and it fit perfectly. I got 2 model of adapter for my magnetic dock and it fit with the bigger one.
My tempered glass has come this day (0.3 mm thickness) and when i stick that on phone the charger doesn't fit anymore, that feel bad..
Click to expand...
Click to collapse
i have the same case and also use the bigger adapter but somehow my phone doesn't want to charge i think my dock is defective...