Related
I shall try to explain the situation best I can.
A long time back, I rooted my S2, then I thought I would sell it, so I wanted to put it back to stock and unroot, which I did.
Now months later, I decided to root the phone once again and put another rom on.
To cut a long story short, currently my phone wont accept any roms of any kind.
If I install CM7, MIUI, Sensation Rom, all of them seem to install a kernel as well, which causes the phone to panic upon boot. Which puzzles me, because if they are made for the S2, then why are they causing problems with my phone?
The only kernel that works for me so far is CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4. This allows me to access the internal SD via usb and put on roms. But I can't install them. As every time I do, I just either get a kernel panic or a black screen. I even used this guide, which should be foolproof and all I get is a black screen.
My phone has been in this useless state for 24 hours now and I've googled until I feel asleep at the keyboard.
Im hoping someone can seriously help me with this, as I don't pretend to know what I'm doing.
I was on ICS before this happened.
If you want your phone back then use the method in cnet to get it working again
and about the roms issue, did you factory reset and full wipe your phone before installing a rom?
I reset and wiped everytime. If I follow the cnet instructions to the letter, it just hangs on the Galaxy S2 logo when you turn on the phone and doesn't go any further. The only solution is to put on the kernel I mentioned above to get access to the SD card on my pc.
I now have managed to get CM7 RC working, but that's not the one I wanted. I wanted to use the Sensation rom, but that installs its own kernel which my phone, for some odd reason, doesn't like.
My phone details now are:
CM Mod 7.2 RC1
Kernel 2.6.35.14-g68ea119
[email protected] #1
1.Boot into recovery
2.Full wipe
3.Wipe cache
4.Advanced->Wipe dalvik cache
5.Install sensation rom zip only
6.Reboot
7.Wait for 5 mins
I followed your instructions precisely. I then installed SensatioN_ROM_3.0_ICS_i9100.zip from this thread
It installed, installed a kernel, flashed modem and said done. I then rebooted and waited.
It comes up with the S2 logo with the triangle, fine but now It just shows a battery symbol with a circle in the middle. After a while it goes to black and then comes back. Like its rebooting over and over.
I unplugged the usb cable and instead of the batter I just get the logo with the triangle. That stays there for a while, goes to black and comes back. Over and over.
I can't even get to recovery. Only thing I can do now is go into download mode and start over, put on the kernel I know that works, install CM7 RC1 and then at least I have a phone. But why sensation rom doesn't work is a mystery to me.
X82X said:
I followed your instructions precisely. I then installed SensatioN_ROM_3.0_ICS_i9100.zip from this thread
It installed, installed a kernel, flashed modem and said done. I then rebooted and waited.
It comes up with the S2 logo with the triangle, fine but now It just shows a battery symbol with a circle in the middle. After a while it goes to black and then comes back. Like its rebooting over and over.
I unplugged the usb cable and instead of the batter I just get the logo with the triangle. That stays there for a while, goes to black and comes back. Over and over.
I can't even get to recovery. Only thing I can do now is go into download mode and start over, put on the kernel I know that works, install CM7 RC1 and then at least I have a phone. But why sensation rom doesn't work is a mystery to me.
Click to expand...
Click to collapse
Don't install anything else
Repeat the steps without any modem or anything
Any try to redownload the zip
How do I stop the install of the modem? The thread only shows one zip file and if I install that in recovery, it installs everything. I can't chose what parts to install. Do I have the wrong zip?
X82X said:
How do I stop the install of the modem? The thread only shows one zip file and if I install that in recovery, it installs everything. I can't chose what parts to install. Do I have the wrong zip?
Click to expand...
Click to collapse
Just install this zip by the method above
https://docs.google.com/open?id=0Bzv8B0L32Z8lZ2hSanUtVHpSb0tFUlhkRVQ1RFhEUQ
Nothing else
While it downloads from google, I just want to clarify.
Wipe data, wipe cache, wipe dalvik. Then I go to install zip from sd. Find SensatioN_ROM_3.0_ICS_i9100.zip, then it installs. But the last time I did this, it scrolls up saying it was installing file system, then flashing kernel, then flashing modem.
Am I doing something wrong here?
And that google link is slow as hell, quoting me 7 hours to download it. Got it from hotfile instead, going to try that one.
X82X said:
While it downloads from google, I just want to clarify.
Wipe data, wipe cache, wipe dalvik. Then I go to install zip from sd. Find SensatioN_ROM_3.0_ICS_i9100.zip, then it installs. But the last time I did this, it scrolls up saying it was installing file system, then flashing kernel, then flashing modem.
Am I doing something wrong here?
And that google link is slow as hell, quoting me 7 hours to download it. Got it from hotfile instead, going to try that one.
Click to expand...
Click to collapse
Yes it should work like that if you have a i9100
Done exactly as you said. I downloaded it from the hotfile link instead and installed it.
Came up with the same thing.
Cleaning Old System files
Installing System
Data Files
Symlinks
Flashing Kernel
Flashing Modem
Ready
Then I reboot and the same looping over and over. Can't access recovery. Only solution is using odin to flash the kernel I used before and be forces to use CM7 since nothing else works.
It's so confusing as Im using the same hardware as everyone else on the sensation rom thread, but it wont work for me. at all.
you sure you have i9100?
GT-I9100
I'm totally puzzled. MIUI doesnt work, Sensation doesnt work and stops me from using recovery. The only thing that works is kernel CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.tar then install CM7 RC1 which upgrades the recovery to version 5 and the phone works. But only on CM7. If I try to install any other rom, it dies a death.
X82X said:
GT-I9100
I'm totally puzzled. MIUI doesnt work, Sensation doesnt work and stops me from using recovery. The only thing that works is kernel CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.tar then install CM7 RC1 which upgrades the recovery to version 5 and the phone works. But only on CM7. If I try to install any other rom, it dies a death.
Click to expand...
Click to collapse
And don't tell me that you flash cf-root after flashing every rom from recovery
No, I only flash that when the rom seems to corrupt it. Like when installing sensation. The only way I can access the SD card to put on another rom is to install that kernel.
X82X said:
No, I only flash that when the rom seems to corrupt it. Like when installing sensation. The only way I can access the SD card to put on another rom is to install that kernel.
Click to expand...
Click to collapse
This is really weird
Maybe someone else can help you
Sent from my x10i using Tapatalk
ok lets try again........
1: forget everything [ideas you have.]
2: go into clockwork recovery
3: format every partition including system / boot [remove your sdcard before starting]
4: use odin and flash stock 2.3.6 LA2 [u can flash whatever you like] and let it boot.
5: now use cf-root and root your device [http://forum.xda-developers.com/showthread.php?t=1103399 ]
6: i assume you know your way from here.
note: its very important to format system / boot partions
if yo dont have cwm or you want to try from scratch heres the latest cwm
http://www.mediafire.com/?wkki6xahfhb3bim
Thanks for info. Just to clarify, the cf-root link contains loads of different ones. How do I properly know which one to use or doesn't it matter? And as for the stock 2.3.6 LA2, again, where do I find that? Reason I ask dumb questions is I don't want to assume and try the wrong one and come back here and complain when it was my fault, I just want to be 100% sure, so again sorry for the obvious questions.
I flashed I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME then CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.
It seems to be working fine now with the default rom. However, when I go into recovery to say perform a backup or mount the sd card, It won't have any of it.
When I try to mount the sd card it just says "error mounting sd card" and when I mount usb storage it says "unable to open lunfile (no such file or directory)". So I don't want to try another rom yet.
X82X said:
I flashed I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME then CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.
It seems to be working fine now with the default rom. However, when I go into recovery to say perform a backup or mount the sd card, It won't have any of it.
When I try to mount the sd card it just says "error mounting sd card" and when I mount usb storage it says "unable to open lunfile (no such file or directory)". So I don't want to try another rom yet.
Click to expand...
Click to collapse
lol when i said or what you want i meant from GB you flashed a ICS ROM. well do this and this time just do what i say......
use odin again and flash XILA2 . after boot dial *2767*3855# [a must]
after reboot you should be running a problem free ROM.
now from CF-root find LA2 and flash that now play with it a while and than you do whatever as now you know where and how to get back to working ROM.
plus after LA2 you will find everything on your phone works so any problem you get on other roms is not hardware
recovery issues should be fixed now. otherwise use odin and again flash that cwm file i posted earlier. you wont loose root
Download ROM from Here
i had the 5.0.2.7 recovery i believe and i upgraded to the newest recovery which is the v3 5.5.4.7 or something like that, then i used a sd card but whenever i put it in and go to recovery i get the android guy with a big triangle next to him and just wont go to recovery and if it does the recovery will just say like 3 options no flash or install. and then i got it to work once and i tried to flash a rom and when i clicked install from sdcard it says error cant mount sd card. any help?
fastboot erase then fasboot flash recovery over again sounds like something got screwy when you installed new one and it reverted to stock recovery
w0lf215 said:
fastboot erase then fasboot flash recovery over again sounds like something got screwy when you installed new one and it reverted to stock recovery
Click to expand...
Click to collapse
and how do i do that? sorry im coming from htc vivid and im doing this stuff for my friends photon.
i didnt imagine everything would be so different lol
edit-
and also the phone is running quite slow and it only has 3g is there a way to fix both of these? make it run faster and get 4g?
im using the codename android rom.
Unlocked means no 4g if you want 4g then have to go back to stock. Then you can flash a prom (joker's skinny, or rockos fot locked)
Sent from my mopho
cool so i will relock it which will unroot and take off recovery right? then simply just root without unlocking and flash any rom that says (locked/unlocked)
you know what to do in order to relock it?
hello
i have the following problem,
my phone wont boot into the os
but boots directly into recovery mode
ive tried to go to download mode and try the odin way, but my pc doesnt recognize my phone anymore
i tried installing the samsung drivers and samsung kies
(worked fine before i tried to flash new rom and install recovery cwm)
ive tried to flash another rom, it succeeds to install the rom but still boots in recovery mode
i also tried to install the stock firmware but it says an error: cant open emmc gt-i9001 (bad) seven
i cant try to use recovery 6 because i have no acces to the internal sd card
i use another phone to put the roms in the external sd card
have i overlooked something?
i have read the similar topics, and googled it, but no specific solution to this problem
i think ive tried everything, please help me
Have you tried a factory reset from the stock recovery?
twizzle654 said:
hello
i have the following problem,
my phone wont boot into the os
but boots directly into recovery mode
ive tried to go to download mode and try the odin way, but my pc doesnt recognize my phone anymore
i tried installing the samsung drivers and samsung kies
(worked fine before i tried to flash new rom and install recovery cwm)
ive tried to flash another rom, it succeeds to install the rom but still boots in recovery mode
i also tried to install the stock firmware but it says an error: cant open emmc gt-i9001 (bad) seven
i cant try to use recovery 6 because i have no acces to the internal sd card
i use another phone to put the roms in the external sd card
have i overlooked something?
i have read the similar topics, and googled it, but no specific solution to this problem
i think ive tried everything, please help me
Click to expand...
Click to collapse
try this
forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
thank for trying to help
@bodh
yes i have tried factory reset, it still boots into recovery
@dkmali
i already tried that way
but odin doesnt recognize my phone, how do i get that to work?
twizzle654 said:
thank for trying to help
@bodh
yes i have tried factory reset, it still boots into recovery
@dkmali
i already tried that way
but odin doesnt recognize my phone, how do i get that to work?
Click to expand...
Click to collapse
How did you get into this situation? DId you try flashing something that caused it? What preceded this issue?
calisro said:
How did you get into this situation? DId you try flashing something that caused it? What preceded this issue?
Click to expand...
Click to collapse
it happened when i installed recovery cwm
i still have the problem when i go into recovery mode, i cant get out
i used another pc to make odin work, i used a bootloader and the os got booted
so the issue is sort of fixed.. i just dont go into recovery mode again
appreciate the help!
twizzle654 said:
it happened when i installed recovery cwm
i still have the problem when i go into recovery mode, i cant get out
i used another pc to make odin work, i used a bootloader and the os got booted
so the issue is sort of fixed.. i just dont go into recovery mode again
appreciate the help!
Click to expand...
Click to collapse
I had this problem once to. On my HTC Flyer, nothing I could do to recognize the phone. I had to ditch the HTC Driver and tried every copy of the android drive I could find on XDA. I will see if I can find the file that worked for me. But in the interim you may want to try a few.
BTW I am not an expert. This worked for me and it sounds like the same situation to me. :fingers-crossed:
Here's a question: where'd you get the recovery? http://www.clockworkmod.com/rommanager, i don't see your device as supported. Also, i believe they're called universal naked drivers, that may be of help.
calisro said:
How did you get into this situation? DId you try flashing something that caused it? What preceded this issue?
Click to expand...
Click to collapse
bodh said:
Here's a question: where'd you get the recovery?, i don't see your device as supported. Also, i believe they're called universal naked drivers, that may be of help.
Click to expand...
Click to collapse
downloaded it on this forum in the i9001 section
yeah im trying that driver thing out right now thx
http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1 if you havent found them.
and in this thread: http://forum.xda-developers.com/showthread.php?t=2129298, the cwm versions are removed.."CWM 6.0.2.7 is not save to use, you may damage your phone. "
so hopefully you tried these: http://forum.xda-developers.com/showthread.php?t=1843825
I am not a developer or anything & havent read many forums...but while playing with myTouch I did get stuck a few times.
Somethings I cant point out if u wanna try as a layman:
1. can u mount your sd card through recovery?
2. if you can than just pick another rom for your device and put it onto your sd card
3. wipe data & partition, wipe cache, delete davlik. some devices work ONLY with wipe script (for my friend only the wipe script worked)
4. dont use odin. go to cwm recovery & install zip from sd card & choose the rom (the 1 from step 2).
I think that should get u out safely....hope it helps
@bodh
i actually installed a cwm 5 version
maybe thats the cause of the whole problem
@indiankarmas
i did install multiple roms from the sd card, first cm9 then stock rom
but it doesnt really work
how i fixed the problem:
when i flashed cm9 and used the bootloader with odin to pass the recovery mode my phone booted the stock os
installing from the external sd didnt work, i just wiped my phone for nothing
it booted the stock os, i didnt want this but this made my pc recognize my phone
so i transferred the rom and gapps in the internal sd
got back to recovery mode and installed from internal sd
and used the bootloader again to pass the recovery mode
again, i appreciate you guys trying to help me out
Right guys I've got a nabi 2 which I was trying to update, I finally got onto jellybean but forgot to flash the bootloader, I have it in my sd card but the nabi won't boot normally or into recovery to flash the jellybean bootloader, I can navigate to fastboot etc... But it just hangs at the menu when I sselect recovery kernel. Any ideas at all are appriciated thanks
LifeOfALegend said:
Right guys I've got a nabi 2 which I was trying to update, I finally got onto jellybean but forgot to flash the bootloader, I have it in my sd card but the nabi won't boot normally or into recovery to flash the jellybean bootloader, I can navigate to fastboot etc... But it just hangs at the menu when I sselect recovery kernel. Any ideas at all are appriciated thanks
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/showpost.php?p=53557529&postcount=2302
Follow the first link and download NABI2RESIZE. Extract that.
Then in second link download hawkcore.zip and run that bat file.
You will need to setup APX driver.
aicjofs said:
Look here http://forum.xda-developers.com/showpost.php?p=53557529&postcount=2302
Follow the first link and download NABI2RESIZE. Extract that.
Then in second link download hawkcore.zip and run that bat file.
You will need to setup APX driver.
Click to expand...
Click to collapse
Right I have got it to boot onto recovery and installed the jellybean bootloader, but now it only boots when I go to recovery abd boot as normal, also when I try to charge it when on it freezes the whole tablet and charges very slowly. Also when I am in recovery and I went to wipe Calvin cache and data it comes up "are you sure, no OS installed" and then when I do wipe it it's says successful but also unable to mount e/ data, no file or folder found. I am also unable to mount the sd card? Sorry for the long post but I wanted to get all the problems in, thanks fir all your help
LifeOfALegend said:
Right I have got it to boot onto recovery and installed the jellybean bootloader, but now it only boots when I go to recovery abd boot as normal, also when I try to charge it when on it freezes the whole tablet and charges very slowly. Also when I am in recovery and I went to wipe Calvin cache and data it comes up "are you sure, no OS installed" and then when I do wipe it it's says successful but also unable to mount e/ data, no file or folder found. I am also unable to mount the sd card? Sorry for the long post but I wanted to get all the problems in, thanks fir all your help
Click to expand...
Click to collapse
So you have the ICS bootloader installed if you followed what I said above. You have to use the ICS TWRP. Use that version to do the procedure you first started with. Restore version 2.3 system, boot and addon, then before reboot the Jellybean bootloader.
Sorry for slow response out of town this weekend.
aicjofs said:
So you have the ICS bootloader installed if you followed what I said above. You have to use the ICS TWRP. Use that version to do the procedure you first started with. Restore version 2.3 system, boot and addon, then before reboot the Jellybean bootloader.
Sorry for slow response out of town this weekend.
Click to expand...
Click to collapse
Finally got sorted, just needed to flash twrp 2.3.6, and the issue with charging was just a charger that nabi sent out as a replacement. So all is good, thanks for all the help
Hi i am trying to install clockworkmod recovery so that i can install cm11 rom. I download the cwm file and copy to sd card, then switch off phone and boot into recovery and install the file from sd card. Then phone goes into cwm recovery but if i reboot and then switch off phone and boot into recovery again it just goes to stock android recovery! Anyone knows whats happening and how to solve? Please help
Benholder90 said:
Hi i am trying to install clockworkmod recovery so that i can install cm11 rom. I download the cwm file and copy to sd card, then switch off phone and boot into recovery and install the file from sd card. Then phone goes into cwm recovery but if i reboot and then switch off phone and boot into recovery again it just goes to stock android recovery! Anyone knows whats happening and how to solve? Please help
Click to expand...
Click to collapse
Ok now my frined. You didnt do anything wrong. The mistake is done on the CM11 Thread that no one didnt change the installation guide with the right one. Coz no one cares tha many people are bricking their phones with those bad instruckitions. Use this guide and everything will be good http://forum.xda-developers.com/gal...ogenmod-11-t2808268/post54368918#post54368918
Just remember when you flash CWM 6.0.5.3 go to advantance and reboot recovery. Also remove your PIN CODE before booting into CM11 coz it was a bug with that .
joop1ter said:
Ok now my frined. You didnt do anything wrong. The mistake is done on the CM11 Thread that no one didnt change the installation guide with the right one. Coz no one cares tha many people are bricking their phones with those bad instruckitions. Use this guide and everything will be good http://forum.xda-developers.com/gal...ogenmod-11-t2808268/post54368918#post54368918
Just remember when you flash CWM 6.0.5.3 go to advantance and reboot recovery. Also remove your PIN CODE before booting into CM11 coz it was a bug with that .[/QU
Thanks! Do i install the cwm recovery by putting file on sd card and then install from recovery mode?
Click to expand...
Click to collapse