Hello guys,
I have a problem over here. I want very badly to install the ISC ftf file that is posted here in one of the treads but the problem is that my phone is rooted and Im unable to upgrade using the flashtool methode.
Maybe I'm mistaken the button that has to be pressed or something. When I press vol up is gets in fastboot mode and vol down is flash mode but after pressing that last the phone boots and can not get into the flash mode anymore.
Can someone give a hint?
Thanks in advance
Lucio25m said:
Hello guys,
I have a problem over here. I want very badly to install the ISC ftf file that is posted here in one of the treads but the problem is that my phone is rooted and Im unable to upgrade using the flashtool methode.
Maybe I'm mistaken the button that has to be pressed or something. When I press vol up is gets in fastboot mode and vol down is flash mode but after pressing that last the phone boots and can not get into the flash mode anymore.
Can someone give a hint?
Thanks in advance
Click to expand...
Click to collapse
First copy in flastool/firmwares 4.0.4.firmware files.
Open flastool and push flash and choose flash and then choose flashmode.
Check wipe data,wipe cache,wipe apps logs and no final verification.
Turn off phone and push volum down and conect your phone in computer.When lihgt is green realease button
and wait still flash program is end
sorry for my bad english
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Hi,
any ideas? I need your help...
I also have such a problem with my PMP5580C DUO.
It just hangs on the Bootscreen with the "The Art Hi-Tech" and the logo.
No chance to get into cwm with power+vol up and even the Hardresetbutton just switches the tablet off.
Can someone help? Or did you find a solution yet?
Thank you very much
W3hrWolf said:
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Click to expand...
Click to collapse
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
http://www.prestigio.com/catalogue/Archive_products/Multipads/MultiPad_8.0_Pro_Duo#/product-support/firmware
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
pmp5580c bootloop
Zacktamondo said:
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
Click to expand...
Click to collapse
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
AzahTabor said:
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
Click to expand...
Click to collapse
Do you have a CWM flashed already or not?
If so then I had this problem before you just need to put the update.zip on the root of the SD card then press the recovery buttons for some time like 2 minutes -some times it takes so long but it works- .
reply to me soon.
Bootloop fixed
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
AzahTabor said:
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
Click to expand...
Click to collapse
hi, i have the same fault on the same tablet, how do i fastboot? also when connected to pc it is saying it is a world cup device? thanks in advance
Bricked PMP5580C
Hello
I have bricked my Intenso Tab 814 (same as Prestigio PMP5580C). I formated the bootloader space + the recovery space, and now I can't even turn it on. The backlight of the display isn't glowing up at least. So I used my MicroUSB cable and connected to the computer, it is recognized by the computer, but I can't flash anything back with the amlogic software which I've got, I am really appreciating when someone of you can try to help me out,
thanks in advance,
AMLOGIC
Unbricked Intenso Tab 814
I have successfully unbricked an Intenso Tablet 814 also know as Prestigio PMP5580C! It had no bootloader and all partitions were formatted! This includes the bootloader, means it even showed backlight as I plugged it into the power supply. I got a rescue sd card made with Christian Troys tutorial but my tabket was nit abke to start, because the nand chip was corrupted, so I looked at the nand chip and used a scrwwdriver and put it on the 6 and 5 th point t the right side on the left side is the hole on the nand chip, after that I was able to permitt the access for the nand chip to the mainboard, so it booted from the sd card automaticaly,
Intenso Tab 814 can be unbricked! Yeah, now I need it's source to customize the recovery and boot splash + oneday the os,
Take care!
Bye bye!
Stuck in bootloop intenso tab 724
So the title says it all how can I fix it? No custom recovery only root
Hey all. Hope you all are doing well. I need your help. A foolish mobile mechanic flashed out my Galaxy s4 gt-i9500 china , now my cell is just turning on and off automatically while connecting to my PC. I can't enter in recovery mode or odin mode etc while pressing selective key combination. volume down + home+power. Please help me, how can i connect my phone with my pc and install android OS.
thanx in advance....
Hi there,
First of all, sorry for my english,
I want to flash new tw lollypop firmware but i have a little problem, my tab have the down volume button broken, so i am not be able to get into flash mode.
Is there any app to gen into flash mode for rooters devices?
Thanks you,
paraboig said:
Hi there,
First of all, sorry for my english,
I want to flash new tw lollypop firmware but i have a little problem, my tab have the down volume button broken, so i am not be able to get into flash mode.
Is there any app to gen into flash mode for rooters devices?
Thanks you,
Click to expand...
Click to collapse
install recovery, enter it by pressing Vol+, and flash PreRooted LP firmware.
Hello Guys,
I wanted to install a custom ROM (Paranoid ROM 5.0)
After a successfull install my phone restarted. Now it's stuck at the Samsung Logo. I wanted to try to go into Download Mode, but my Volume Up Key doesn't work (To Confirm it) .
Now i ask you how to solve this problem. Is it possible to "press" keys in ADB? Or something like this??
Sorry for my bad english ^^
Thank you.
EDIT: Solved by pressing the Volume Up Button really fu**ing hardcore (a few times). The button works now fine
exampleguy said:
Hello Guys,
I wanted to install a custom ROM (Paranoid ROM 5.0)
After a successfull install my phone restarted. Now it's stuck at the Samsung Logo. I wanted to try to go into Download Mode, but my Volume Up Key doesn't work (To Confirm it) .
Now i ask you how to solve this problem. Is it possible to "press" keys in ADB? Or something like this??
Sorry for my bad english ^^
Thank you.
EDIT: Solved by pressing the Volume Up Button really fu**ing hardcore (a few times). The button works now fine
Click to expand...
Click to collapse
Hello! I think you've got the wrong combination for download mode . To enter in download mode you need to press" vol - " "home" and "power"