As the title says.... I am currently running ZenDroid 2.0.1. Before flashing this as always I start off fresh by Odining back to stock then proceed with whatever rom is to my pleasing that week... I have tried using different cables. I have also tried a PC and a MAC running Parallels(VM). I also tried Hiemdall on both. All still no luck. I have googled and all I find is the suggested above. I also tried getting into download mode in all ways I know possible to see if Odin might possibly recognize it. (Holding volume buttons while plugging into PC, Up+Power button, AIO reboot into DL mode, selecting Download from power menu and even using a JIG.
If anyone else has any other suggestions or if I missed something, please LMK??
Thanks in advance for taking the time to help
Sent from my SGH-T959 using XDA App
I think what you need is:
Latest odin v1.85
Latest Samsung drivers
And another usb cable to try.
the method you use to get in download mode should not make a difference - if you're in download mode - you're in download mode.
Does your computer recognize your phone when the phone is booted up? Can you connect and transfer files, etc.? If so - your USB cable and connectors are good, and your problem is likely related to not having the drivers installed.
if you're trying this on a new computer - one you haven't ODIN'd your phone from before, make sure you have the samsung drivers installed.
If you can't even transfer files, etc. - try a new USB cable - and NOT one that came with a charger (some of those are not actually USB cables - they can only charge your phone). You can get usb-to-microusb cables for like a buck online - places like monoprice or many others.
If you REALLY did try new USB cables, make sure the USB ports are clean - both on the phone and on the computer you're trying to hook to.
Thanks for your responses.
I found the solution to my problem. I decided to start from scratch. I deleted the drivers, AIO and Heimdall. Then I plugged in the phone just to see if Windows 7 sees it as an unknown device still. It was recognized but it was asking for drivers this time. So I proceeded to install JUST the driver and magically everything was working NORMAL again!!
Im not sure what may have caused this to happen. I flash my phone every other week so I found it kind of odd when this did occur.
Oh well.. ITS FIXED!! AND I CAN FLASH AGAIN!!
Sent from my SGH-T959 using XDA App
odin doesnt detect my phone
I dont know what to do! Odin doesn't detect my phone. i have tried different usb cable , different computer. no matter what i did odin doesnt recognize my phone in download mode. what should i do? Please somebody help. What driver should i install?
Hi guys, was having a few problems with my phone and decided that I'd flash the stock ROM again.
Went into ODIN as you do, and as I was flashing the stock ROM, for some reason or another I heard the disconnect/reconnect noise that Windows makes when you remove a device then FAIL came up in ODIN.
Now my phone's stuck with a phone connecting to a computer on the charge screen, it can't go into recovery mode but it can go into download mode.
Tried connecting it to my PC in download mode, and even though I've got the Samsung USB Drivers installed I get the 'USB Device Not Recognized' message, which means I can't flash the stock ROM in ODIN anymore.
Does anyone have any advice? Thank you.
JoshS2 said:
Hi guys, was having a few problems with my phone and decided that I'd flash the stock ROM again.
Went into ODIN as you do, and as I was flashing the stock ROM, for some reason or another I heard the disconnect/reconnect noise that Windows makes when you remove a device then FAIL came up in ODIN.
Now my phone's stuck with a phone connecting to a computer on the charge screen, it can't go into recovery mode but it can go into download mode.
Tried connecting it to my PC in download mode, and even though I've got the Samsung USB Drivers installed I get the 'USB Device Not Recognized' message, which means I can't flash the stock ROM in ODIN anymore.
Does anyone have any advice? Thank you.
Click to expand...
Click to collapse
Try installing samsung kies. The usb drivers are included.
princeownt said:
Try installing samsung kies. The usb drivers are included.
Click to expand...
Click to collapse
I have it installed, and I installed the USB drivers from the soft bricked sticky in this section. Neither have helped.
Hi!
Hi, you guys install ADB on your system? And also USB debugging mode on the phone?
Should be turned on which can be done by going to Settings>Applications>Development and select USB debugging.
Try this, for me its works
MafiaDroid said:
Hi, you guys install ADB on your system? And also USB debugging mode on the phone?
Should be turned on which can be done by going to Settings>Applications>Development and select USB debugging.
Try this, for me its works
Click to expand...
Click to collapse
I can't even turn the phone on at the moment. Only thing I can do is go into Download mode.
Help
Try this, take out the battery, then press and hold the ON button for 7-10 seconds (the longer the better). Reinsert the battery, then press ON button to start it. This is a soft reset, and wipes the temporary memory and empties all remaining power in the circuits. This helps on many phones and even laptops that won't start properly or show anything on screen.
If this does not work, try the next step. Again, do as above. But after inserting the battery, do not turn the phone on, but press and hold the ON button and the HOME button at the same time for 7-10 seconds. This is a hard reset, and works best if done after a soft reset. Just be sure the battery has at least some juice in it and isn't empty. If possible, try with another battery if this does not work.
Hope this helps!
Try going to device manager, you will probably find your device as an unrecognized device, uninstall the drivers, unplug and then plug it again and see.
if the prblm is hard then do a fresh installation of kies,device etec etc.....but if u have ur device in the device list on pc then first uninstall it...if possible try recovery mode and reset...
I tried everything you guys have suggested and none of that worked. Anyone else got any ideas?
Try everything (and I mean everything) on the following list. Given the problems you've had & that you've already tried some of these things, I'd try another PC. And if it doesn't work first go on another PC, then go thru the list & try everything on the 2nd PC.
*Ensure Kies & it's processes aren't running in Windoze task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again. Also run Windoze Update.
*And if all this fails, try a different PC.
Tried all the above and a different PC.
It didn't work. I could fix the phone if the computer would pick up that the phone's connected - it just doesn't.
Total Removal of KIES including registry entries .
Reboot PC install a new copy of Kies .
Phone backup data and factory reset .
Set phone to USB storage mode using the Samsung cable connect to PC and wait for Windows to find USB drivers .Remove cable reboot phone .
Start Kies connect with cable wait for Kies to find the phone .
Note USB Debugging OFF and cable connects to a direct motherboard port only .
Nothing then only further suggestion would be to Format the PC and start over with a clean Windows install .
jje
I can't turn the phone on, it's stuck on the phone, triangle, PC screen.
I've tried fresh installs on three different PC's.
JoshS2 said:
I can't turn the phone on, it's stuck on the phone, triangle, PC screen.
I've tried fresh installs on three different PC's.
Click to expand...
Click to collapse
That's a forced download mode.
Try a blind flash to a stock firmware from Odin while connected to your computer with the phone on this screen. Even if Odin doesn't seem to register that it's connected. I've heard of at least one person this worked for.
At this point, you really have nothing to lose by trying this.
Bit of an update, I plugged it in again and it installed some drivers and ODIN picked it up. Only for it to disconnect a few moments later, now it keeps disconnecting and reconnecting over and over but ODIN's not picking it up.
JoshS2 said:
Bit of an update, I plugged it in again and it installed some drivers and ODIN picked it up. Only for it to disconnect a few moments later, now it keeps disconnecting and reconnecting over and over but ODIN's not picking it up.
Click to expand...
Click to collapse
I know you said you tried a different cable, but that sounds suspiciously like a bad cable.
It's not the cable, thanks any way.
Update 2: I managed to get it to connect long enough to flash the stock Kernel. Still didn't reboot. Then I connected it again and flashed the stock ROM, which bricked it again. Then I flashed the stock kernel and it works!
However, there is a problem:
When the phone gets turned off, it constantly shows the charging battery icon with warning triangle and a thermostat next to it. I can't turn the phone on because of this unless I go into Recovery mode and reboot system.
Any ideas? Thanks.
JoshS2 said:
It's not the cable, thanks any way.
Update 2: I managed to get it to connect long enough to flash the stock Kernel. Still didn't reboot. Then I connected it again and flashed the stock ROM, which bricked it again. Then I flashed the stock kernel and it works!
However, there is a problem:
When the phone gets turned off, it constantly shows the charging battery icon with warning triangle and a thermostat next to it. I can't turn the phone on because of this unless I go into Recovery mode and reboot system.
Any ideas? Thanks.
Click to expand...
Click to collapse
Now this sounds like a faulty/dirty/bad usb port.
ctomgee said:
Now this sounds like a faulty/dirty/bad usb port.
Click to expand...
Click to collapse
This was my original thought and my reasoning for flashing a stock ROM in the first place!
JoshS2 said:
This was my original thought and my reasoning for flashing a stock ROM in the first place!
Click to expand...
Click to collapse
I in no way recommend this, and not sure I would do it if I ever started having this issue...
BUT - I have heard that some people faced with this condition have fixed it by physically moving the small wafer board inside the USB port with a precision screwdriver (gently!) to a more "centered" position.
If that doesn't work, look at replacing that part. Either via warranty service if you still have it, or a service center.
Ok so i tried to install a new rom because my AOKP Rom wasnt connecting to my PC so i thought.
Ok so here is the problem. Half way through installing a rom, some how my phone crashes, after waiting 5 hours just incase i ripped out the battery and thought i will reinstall a rom that works the CWM. Nice and easy so i thought until i couldn't access CWM. So now i have a non bootable block of plastic and a screen.
Next i put the phone into download mode expecting to use Odin to just reinstall everything from scratch however my computer cannot recognise my Device. It says USB device not recognised and doesnt show up a drive letter on my computer. Any ideas of how to fix this?
No 1) let me make this clear it is not a driver issue, as all the correct drivers are installed and my girlfriends GS2 works fine.
No 2) it doesnt matter which computer i try to connect it to it wont work.
No 3) i have tried it with and with out Samsung Kies.
No 4) The batter is charging so the port cant be completly dead.
So how do i install anything on the phone if a computer cannot access it?
I even thought of trying to use killdisk to wipe any dodgy partitions but of course this wont recognise this device as a drive letter.
Please please can any body help or should i just assume the usb port is Dead.
Hi all,
I have a Rooted, WanamLite v6.3 ZSEMC1 ROM with AdamKernel 2.2.1+. i9300.
I updated recently from another previous version of the same ROM because I had noticed that my USB functionality has not been working. Specifically, the MTP application. Soon further found that my computer does not recognise ADB commands at all, as I used to install .apks from my computer quickly with adb install.
Odin does not even recognise my phone, even when in download mode. The only thing I havent tried yet is ADB in CWM Recovery, but im 99% sure that wont work still.
When I plug the micro-usb plug in it charges fine, but no data connection seems to occur. No windows detection, No USB device connected in the notifications bar.
I have tried:
-Backing up
-Installing vanilla ROM
-Installing stock ROM
-Using different computer with drivers
-Reinstalling Samsung Drivers
-Tried using Kies for the drivers
-Changing SD cards
-Power Cycling phone removing sim and micro-sd cards. Turning on after some time.
-Cleaning the micro-usb port on the phone with dental picks.
Im pretty much out of ideas apart from trying to organise to send it for repairs, after un-rooting.
If I was to re-root do you think this would solve the problem?
Any help is much appreciated.
Thanks :good:
UPDATE: I fixed this by using Mr. Despairs suggestion.
Power off, pull battery, SIM, SD card. Power cycled the power button with no battery in it.
Waited about 1-2 minutes.
Battery in boot straight to Download Mode.
Only got it to recognise once in about 15 tries.
Thanks again Mr Despair!
You could also try another cable. Or what I read in another german forum: Shut down your phone, take the battery out and in and reboot. Then reboot into download mode and plug in your phone. Then your PC should search for drivers.
Do this as a colleague says Mr. Despair replace the cable. Often dirt in the connector. Clean the connector on the phone.
Also check ...
Also check on a different computer/port - it could be a problem with the USB drivers on your computer.
Probably the safest test would be to cross-test combinations of 2-3 computers vs 2-3 phones.
xclub_101 said:
Also check on a different computer/port - it could be a problem with the USB drivers on your computer.
Probably the safest test would be to cross-test combinations of 2-3 computers vs 2-3 phones.
Click to expand...
Click to collapse
He already wrote that he tried more PCs. He would have very bad luck if it is on both. But trying doesn't cost. He shoule then also try to plug it direct into the USB ports and not through a hub.
I have also tried two other cables which both previously worked.
Ill give the hard reboot into download mode a try.
No PC recognises it at all at the moment.
I have tried all USB ports, directly not through a hub or whatnot. This includes other computers too.
Im open to any other suggestions.
Thanks for the help so far
Have you installed KIES?
KIES and ODIN cannot co-exist.
Install ONLY Samsung USB drivers then run ODIN.
As for installing apks, you shouldn't need to install via adb. You can just copy to sdcard and run from there.
Sent from my GT-I9300 using XDA Premium
IRPnet said:
Have you installed KIES?
KIES and ODIN cannot co-exist.
Install ONLY Samsung USB drivers then run ODIN.
As for installing apks, you shouldn't need to install via adb. You can just copy to sdcard and run from there.
Sent from my GT-I9300 using XDA Premium
Click to expand...
Click to collapse
I had used ODIN without KIES existing on my system.
I installed KIES to try and get it to read my phone for once.
I used ADB to install .apks when I had ADB running. I have the problem now that I cant use it, because my phone MTP, ADB or even Download Mode wont read my phone. All from different computers etc.
:crying:
Sounds more and more like a hardware failure. What about reboot to CWM then in mounts and storage to mount the USB drive? Can your PC recognize it this way?
Mr. Despair said:
Sounds more and more like a hardware failure. What about reboot to CWM then in mounts and storage to mount the USB drive? Can your PC recognize it this way?
Click to expand...
Click to collapse
Yeah im thinking hardware too. If I throw it into CWM and try to mount /sdcard, it doesnt to anything. Nothing changes it just stays permanently on mount /sdcard. (Its not mounting).
Mounting external_sd works but its not helping me.
Anyone ever returned a SGS3 to factory or phone provider?
Mr. Despair said:
You could also try another cable. Or what I read in another german forum: Shut down your phone, take the battery out and in and reboot. Then reboot into download mode and plug in your phone. Then your PC should search for drivers.
Click to expand...
Click to collapse
I initially tried this with no success, however after about 15 tries I got it to work once!
Thanks heaps for this!
Pull Battery, SIM and SD. Press Power buttons a few times and let it sit for about 1 minute.
Battery in and boot straight to Download mode. Worked once in about 15 tries. Reflashed everything and it works now!
Thanks Despair!!:laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Hi guys, i realy need your help, my phone is dead.
My I9100 worked fine for two years, I flashed lots of custom firmwares by Odin. Half a moth ago, when I was going to sleep, I plugged in the charger as usually, and noticed, that it started beeping occasionally. On the display it indicated smth like: Charging... than Not Charging... than Charging and so on.
I thought that I plugged the charger incorrectly and replugged it, but it didn't helped. I was very tired and just simply turned the soud off and left the phone charging. In the morning it indicated that it is charging even when the charger was unplugged.
So I've flashed the firmware - no help, than kernel from stock to fillz - no help , than siyah than again to stock - no help. All flashings were maid via CWM. I realized that flashing will not help when I turned off the phone and it was indicating that it is charging.
I decided not to do anythig. Only USB mode didn't worked because when you want to use your phone as USB you should open the apropriate mode on the phone than there will be smth like : plug the USB data cable to enter the USB data transfer mode. I couldn't do this because my phone thought that the cable is already plugged. In forums i've got hints that my micro usb should be cleaned or small board should be replaced. So i decided to clean it. I disassembled the phone and cleaned that board with micro USB. Than turned on the phone, and connected the cable. Phone recognized it and I managed to transfer files from pc to phone. From this point I can say that all terminals on micro USB are ok.
When i unplugged the cable, phone thought that it is plugged((
The most awful part:
I decided to flash it one more time and go to stock via backup made by CWM a year ago.
But during this process the phone made a reboot by itself and after that there was no loading. I can see only name of the device and thats it.
No recovery. Only download mode.
When i connect it to PC in download mode, there is a sound that USB is connected but the device is Unknown. There is no any information about this device in dev manager on PC. I tried two USB cables, all usb ports, two laptops, all versions of USB drivers for my phone.
Earlier, drivers worked well, but now i can't understand where is the problem: Is the problem still connected with my micro usb port or i just erased boot sector and it is already brick.
I gave my phone to service center, they told that they can't help me with this. They say that usb is ok, we don't know why it is not detecting by pc.
Can the board replacement help in this issue or maybe i can do smth. in linux with my device ??? I'll appreciate any suggestions.
Yesterday I talked to representatives of service center and they told me that the problem is that internal memory is damaged and they cant flash the phone.
I took the phone and tried to flash it via Heimdall with brick fix pit.
After using this pit file, the phone was flashed normally and even turned on normally.
But in the phone info menu I saw no any data about internal memory. (It was damaged and required format). I tried format through phone menu and it did nothing.
I decided to flash the phone via Odin with normal 16 GB pit file and had a bad luck. I experienced freez during repartition. After this, phone is a complete brick.
When I connect it to PC without battery pressing vol down and rower buttons it connects as unknown device but there is nothing on the phone display. No recavery no download mode. Nothing - just reflection of my frustrated face).
Currently i'm tring to make a Jtag, maybe it'll put it in the download mode, but hope is dying....
I've herad somewhere that it is possible to put it in the download mode in linux. If somone did this, could you please give me the contact of this person?