Hello!
I wiped everything then i installed mysensedx rc 3.5 ics then i create a backup with fixed nexus recovery.Everything was working fine.Then i again wiped everything and insttalled supersensedx then i installed crossbreed.Then i flashed anything to remove the transperancy.Ok maybe there is conflict between this things.I wipe again flash the room, booting everythings work and then i flashed again this file to remove transperacy.Then i created a backup and when i try to exit from the recovery phone cant boot.I have to install boot.img file again.Thats every time when I go in recovery, phone cant boot...Its really strange and I dont see where can be the problem...
mefistoreyon said:
Hello!
I wiped everything then i installed mysensedx rc 3.5 ics then i create a backup with fixed nexus recovery.Everything was working fine.Then i again wiped everything and insttalled supersensedx then i installed crossbreed.Then i flashed anything to remove the transperancy.Ok maybe there is conflict between this things.I wipe again flash the room, booting everythings work and then i flashed again this file to remove transperacy.Then i created a backup and when i try to exit from the recovery phone cant boot.I have to install boot.img file again.Thats every time when I go in recovery, phone cant boot...Its really strange and I dont see where can be the problem...
Click to expand...
Click to collapse
Try it without crossbreeder, maybe it's conflicting with the mod
Related
I just loaded CM10 SDC on my tablet because CM10.1 started to get really buggy and crashed a lot. Normal procedure wipe data,wipe cache, wipe dalvik cache.
I replaced the recovery.img which was 5.x.x.x with the newest version (6.0.2.9). Installed zips and when I booted it didn't find WiFi. Went into settings and WiFi wont turn on.
Trying to figure out what's wrong. I didn't delete and ROM partitions or anything. Only thing I can think is by installing the zip with the newest recovery didnt fully install the ROM. Any suggestions what to do?
datallboy said:
I just loaded CM10 SDC on my tablet because CM10.1 started to get really buggy and crashed a lot. Normal procedure wipe data,wipe cache, wipe dalvik cache.
I replaced the recovery.img which was 5.x.x.x with the newest version (6.0.2.9). Installed zips and when I booted it didn't find WiFi. Went into settings and WiFi wont turn on.
Trying to figure out what's wrong. I didn't delete and ROM partitions or anything. Only thing I can think is by installing the zip with the newest recovery didnt fully install the ROM. Any suggestions what to do?
Click to expand...
Click to collapse
Also (in case somehow a partition was erased) I have all my Serial Number, Mac Address etc etc on backup. But I am assuming it's not a problem because I didn't write over the p5 partition.
I solved the problem by using the SDC img and writing that to my SD card. WiFi works now. If anyone else has similar problems DO NOT upgrade your recovery.img before flashing. It will most likely not flash correctly.
so ive had a bunch of issues with this, but now everything seems to be running smooth, except my wifi. i cant get it to turn on after wiping caches, re flashing both rom and kernal, everything. i dont know what to do next, plz help someone
ixi_devo_ixi said:
so ive had a bunch of issues with this, but now everything seems to be running smooth, except my wifi. i cant get it to turn on after wiping caches, re flashing both rom and kernal, everything. i dont know what to do next, plz help someone
Click to expand...
Click to collapse
I flashed the new Viper 2.0 and I am having the same problem. I came from Elegancia ROM, flashed the kernel for viper then did factory reset, cache and dalvik wipe for 2.0 independently before full wiping in the ROM. Everything else seemed to work but I remember at the set up screen there wasn't an option to install Wi-Fi.
I tried flashing the ROM again on top of the newly installed viper 2.0 but still the Wi-Fi just says it's turning on.
Going to start over again with full wipe to see if it works this time.
Edit: shouldn't have said everything else worked because didn't do full test. Just got install failed message and next screen said install successful where the reboot system, wipe buttons are. Does boot and go through motions but no radio it seems. MD5 checked out for both kernel and ROM. Starting over with new downloads.
effezie said:
I flashed the new Viper 2.0 and I am having the same problem. I came from Elegancia ROM, flashed the kernel for viper then did factory reset, cache and dalvik wipe for 2.0 independently before full wiping in the ROM. Everything else seemed to work but I remember at the set up screen there wasn't an option to install Wi-Fi.
I tried flashing the ROM again on top of the newly installed viper 2.0 but still the Wi-Fi just says it's turning on.
Going to start over again with full wipe to see if it works this time.
Edit: shouldn't have said everything else worked because didn't do full test. Just got install failed message and next screen said install successful where the reboot system, wipe buttons are. Does boot and go through motions but no radio it seems. MD5 checked out for both kernel and ROM. Starting over with new downloads.
Click to expand...
Click to collapse
Ok so here was my soultion after msgn turge, the kernal in the ZIP folder is ****ed up, u need to go to post 2 in the thread (nice bold red note cause of me haha) get that kernal. Now when I went to flash, I usually use fastboot flash bootimg boot.img
For what ever reason I got many errors until I did full wipe, caches and all, and before I let it try to boot I caught it into boot loader .
To flash it sucessful I had to use fastboot flash boot boot.img. very subtle difference from the other one... But made all the difference.
Full working here, clean smooth. WiFi on.
ixi_devo_ixi said:
Ok so here was my soultion after msgn turge, the kernal in the ZIP folder is ****ed up, u need to go to post 2 in the thread (nice bold red note cause of me haha) get that kernal. Now when I went to flash, I usually use fastboot flash bootimg boot.img
For what ever reason I got many errors until I did full wipe, caches and all, and before I let it try to boot I caught it into boot loader .
To flash it sucessful I had to use fastboot flash boot boot.img. very subtle difference from the other one... But made all the difference.
Full working here, clean smooth. WiFi on.
Click to expand...
Click to collapse
My problem was how I flashed the kernel. As soon as I started over I saw what was wrong with my preperation. Glad your up and running.
I've unlocked bootloader, tried to flash new rom and now i got stuck at rom's logo. I just can wait forever and nothing happenes.
Tried to wipe, and even format everything (data/cache/system) and nothing.
Tried CM10.1 i a zip, ExperiencedStock as a backup, and even my own backup i've made before.
Everytime i got stuck at rom's logo.
I dont know how to put my phone in SW Update mode since i got CWM, and every time CWM starts and i cant flash it with LG support tool because the program doesnt see my phone.
Did anyone had this problem?
Maybe stock Recovery.img would help? Anyone could give me it? I can try to flash it again with fastboot mode.
Or any other sugesstions?
karaczan said:
I've unlocked bootloader, tried to flash new rom and now i got stuck at rom's logo. I just can wait forever and nothing happenes.
Tried to wipe, and even format everything (data/cache/system) and nothing.
Tried CM10.1 i a zip, ExperiencedStock as a backup, and even my own backup i've made before.
Everytime i got stuck at rom's logo.
I dont know how to put my phone in SW Update mode since i got CWM, and every time CWM starts and i cant flash it with LG support tool because the program doesnt see my phone.
Did anyone had this problem?
Maybe stock Recovery.img would help? Anyone could give me it? I can try to flash it again with fastboot mode.
Or any other sugesstions?
Click to expand...
Click to collapse
Try hard/factory reset ; turn off your phone , hold vol- & home ,press and hold power for couple of seconds
With vol-,home & power it also boots to CWM :/
Have you trying to restore stock rom via Cwm? You can download fresh one from our forum.
Go to advanced and clear dalvik cache it might help
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
Yes, tried fresh CWM backups also.
But finally i solved this problem
Dont know why, but when i formatted internal sd, rom booted with no problems.
Firtstly i didnt want to format internal sd because there was my backup in case something goes wrong.
But it went wrong, so i had nothing to loose
So if anybody will have this problem then format everything (cache/data/system/internal_sd, wipe Dalvik), then restore backup or install zip from sd_ext.
ExperiencedStockFinal booted ok, backup made on sd_ext also.
Will now try to install CM10.1, and maybe i'll investigate why i have this bootloop bug on my phone.
Been using twrp since rooting note II. I wanted to try out 4.4 PA but they said to only use cwm. It was late so I decided to be lazy and since I used to use rom manager all the time I installed it to flash cwm recovery then booted into recovery to install touch version. It wasn't showing the touch version so selected to restart to check to see where I saved it to it would not boot past the first "note II" splash screen. Battery pull then back into recovery and went ahead and flashed PA 4.4 and now it will get past the splash screen then shows boot animation but then starts all over.
Is this a rom manager issue?
can I flash twrp from within cwm recovery?
will I have to basically reroot it?
Any suggestions on how to get back to twrp and to a usable phone?
thanks
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Nope did my standard wipe cache, wipe dalvik, and factory reset then flashed rom then gapps. Going to go back to twrp and wait for 4.4 to be more stable before I try it out again and maybe then I can use twrp to flash it.
thanks for the help
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
jdpeck said:
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
Click to expand...
Click to collapse
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
fallingup said:
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
Click to expand...
Click to collapse
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
jdpeck said:
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
Click to expand...
Click to collapse
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
fallingup said:
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
Click to expand...
Click to collapse
Finally got it. Thought using odin to flash back to root 66 and start fresh would work but after that it was still going to the splash screen then black and a battery pull had to be done. TWRP back ups would fail when trying to restore, so I reverted back to an older version of twrp and it finally let a back up be installed and it booted up just fine!!
thanks for all the suggestions
Im having a similar problem to yours, I am using twrp and flashed PA 3.99 the phone works great, but if my battery dies or i restart the phone or shut it down it automatically wont get passed the samsung logo, or sometimes the PA logo, the only work arounds ive seen to it is to wipe the cache and dalvik to boot, but when that fails i have to install the whole rom over again. any ideas?
I was using my phone and all had been working fine for ages. It was in my pocket for a while and when i took it out to use it I saw that it was on the boot animation of CM11. My phone was already on when I last used it so I had assumed it had crashed. I took the battery out and turned the phone on again but it got stuck on the CM boot animation. The last time I turned on my phone before that was when I flashed a supersu zip file to make my root work as I was having some problems. After flashing the supersu zip and told my CWM recovery to restart the system, it prompted me to "fix root" or something like that, and I clicked yes and it booted normally. That was the last time it booted normally before being stuck as it is now. First thing I did after it got stuck was go into recovery and reflash my current rom ( a CM11 snapshot) I then got faced with a status 7 error and so couldnt flash the rom. So then I flashed multiple other CM11 roms, none of which worked, so I flashed a CM10.2 stable rom which worked. I then got faced with the fix root before reboot thing and so I clicked yes. Still had the stuck booting thingy. I tried many things, flashing kernals roms gapps etc and nothing made a difference. I wiped cache, dalvik cache and no difference. I even wiped the system and tried to flash roms but only the 10.2 one would work, still got a status 7 with the CM11 ones. When I wiped my data however and flashed CM 10.2, it booted. I still couldn't flash the CM11 roms though even after a factory reset. So I have the reason to believe something in the data is wrong, not cache system or anything like that. What could it be? I don't want to have to lose all my data in order to be able to use my phone again, even then, something is still wrong as my phone won't flash CM11 roms anymore. So my questions are;
What things could have caused this?
Can this be a problem from flashing the supersu zip (a root issue)
Is it possible to somehow view or copy the internal data on a computer (since I cant get into the operating system), and this would allow me to get all my pictures contacts music etc anything so I can use my phone by wiping data?
Thanks, sorry this is quite long and probably hard to understand whats going on, but help is appriciated thanks
Don't fix root if you wish to use SuperSU instead builded-in cm superuser. Also try to flash via Odin latest recovery. TWRP should be fine. You can mount partitions from recovery level to download data to your computer. Of course if it still exists. If not, if they are corrupted you need to flash stock ROM and repeat whole cm11 adventure again. If Odin successfully flash the stock then it's a chance your partition layout and user data are untouched.
____________________________________________
P3110 / I9300 / I9100 / NEXUS 5 / iPAD2