I have a Dapeng A7 mtk6573 Android phone I just purchased. It was supposed to come prerooted but for some reason it did not and the ebay seller wont take it back or exchange it with another one that is rooted like the original item description said he would. So Im not sure where to go from here. I tried Superoneclick and didnt get very far with it. I am still new to the whole rooting process but i managed to root and rom my Evo 4g without bricking it multiple times. I can follow any directions given just need some help to be pointed in the right direction on how to get this one rooted. Can anyone help?
hi, sorry fo my english
you must download a russian modded recovery here: ge.tt/5UwovRF/v/02
you must flash it with flash tool,...(see many guide in internet if you no know)
after you must enter in it, you pull power and vol+ together,
and install this file: ge.tt/1ili71F/v/0
after you had disabled verification of signature.
so reboot your phone
Angelo
ps
i.m newbee and no can post link.. added http//
shad0w1369 said:
I have a Dapeng A7 mtk6573 Android phone I just purchased. It was supposed to come prerooted but for some reason it did not and the ebay seller wont take it back or exchange it with another one that is rooted like the original item description said he would. So Im not sure where to go from here. I tried Superoneclick and didnt get very far with it. I am still new to the whole rooting process but i managed to root and rom my Evo 4g without bricking it multiple times. I can follow any directions given just need some help to be pointed in the right direction on how to get this one rooted. Can anyone help?
Click to expand...
Click to collapse
As soon as I have some spare time I'll try to follow this
http://ciphone.fr/blog/blog1.php/rooter-son-gsm-chinois-android
But the SuperOneClick download is detected as virus, so I have downloaded it from xda-developers
Bye
merlot said:
As soon as I have some spare time I'll try to follow this
...
But the SuperOneClick download is detected as virus, so I have downloaded it from xda-developers
Bye
Click to expand...
Click to collapse
SuperOneClick does not work on my Dapeng A7. Instead I use adb remount, then adb push superuser.apk into /system/app. This works.
Please note that adb remount does not always work. I have to try a few times. Most of the time, I got success by turning USB debugging on only after I connected the phone and umount USB drive.
Dapeng A7 1gb rom custom recovery
I have good news for 1gb Dapeng A7device owner (aka e1108_v73_hjy2a7) who wants to root/backup their phone.
I just finished modding a custom recovery based on 512mb recovery by replacing original boot.img with 1gb boot.img and tested to work fine (credit to linerty for the base of 592zn.com recovery image file)
To use this, please make sure you have 1gb rom via engineer mode by typing *#*#3646633#*#* on dialpad and choose Memory > Nand Flash ... if it states
Name : KBY00U00VA_B4, ID: 0xecb3, total size 1024mb
Click to expand...
Click to collapse
then this recovery is for you.
Using 512mb recovery on 1gb device will show below error due to missing partition when boot into recovery:
E:can't mount CACHE:recovery/command
E:can't find MISC:
E:can't mount CACHE:recovery/log
E:can't open CACHE:recovery/log
E:can't find MISC:
Click to expand...
Click to collapse
here is Dapeng A7 1gb custom recovery:
http://www.4shared.com/archive/83g2LqtZ/dapeng_a7_1g_rec.html
Dapeng A7 1gb scatter file: http://www.4shared.com/office/XWtNUNVL/MT6573_Android_scatter_dapeng_.html
make sure you download both files
Use SP flash tool, load the scatter file, make sure you only tick recovery and choose the img file ... remove battery and usb cable, press download on SP flash tool ... insert battery .. then insert usb cable (you have 15 sec to do this) ... once it finish, remove and reinsert battery, hold Vol up + power to boot into recovery
-------- after booting into the custom recovery -----------
Now you can flash the uniroot2.signed.zip to root it (get it here) or make nandroid backup, flash custom zip etc. (to flash custom zip - eg: custom rom, make sure toggle signature verification to disable 1st)
512mb device (e1108_v73_hjy1) please use the custom recovery as stated here.
Note : It is advisable to make a full factory backup using mobileuncle gscript after rooting your device as stated here : http://forum.xda-developers.com/showthread.php?p=27039072
Disclaimer: please understand that I'm just trying to help and do not take any responsibilities if you brick your device. (mt6573 devices won't easily brick if you have your backup or the right factory firmware - simply run SP flash tool and overwrite for factory firmware or use recovery mode to restore backup)
ps : recovery mode is good until you mistakenly flash preloader/dsp_bl/uboot img file .. other than these 3 files, the phone should be up and working after restore.
Problems with our two DAPENG A7 and mobiles-phones.cn
Problems with our two DAPENG A7
Hello,
(sorry for my english, it's not my first language)
We bought two Dapeng A7 from mobiles-phones.cn last month. both of them failed within a month !! The first one had video bugs and could not take phtos and videos anymore (cost 26€ to return it back)
The second one has no more microphone and needs an earphone to work !!
A friend of mine just received the DAPENG A75 last week and has a flash LED problem.
So, take care with these Dapeng products wich are not reliable (we had a chinese H7300 wich was very good) at all. Don't hesitate talking about chinese phones troubles on this forum, it could be good for someone hesitating to order over there.
Bye
DAPENG A7 = MT6573
DAPENG A75 = MT6575
Please do not mix between the models. Btw, have you tried restore to factory/factory reset? maybe it's only a software bug.
Dapeng A7 1gb firmware backup
Hi all,
After going through much trouble .. I finally managed to extract Dapeng A7 1gb rom (e1108_v73_hjy2a7) in the form of img files so that others can try revive their bricked Dapeng A7 1gb phone via spflashtool.
Take note that this is only for Dapeng A7 1gb nand/rom ONLY. Please check via dialpad *#*#3646633#*#* and choose Memory > Nand Flash.
http://www.4shared.com/archive/n3y60_1L/backup_dapengA7_e1108_v73_hjy2.html
This is unrooted, untouched firmware. So if you want root, refer to my previous post on how to root using custom recovery and uniroot2signed.zip
Now I don't have the phone anymore. So I wish all the best to those who wants to revive their phone due to wrong flashing/etc.
A7 MTK6573 uboot.img
aze2learn said:
DAPENG A7 = MT6573
DAPENG A75 = MT6575
Please do not mix between the models. Btw, have you tried restore to factory/factory reset? maybe it's only a software bug.
Click to expand...
Click to collapse
I have a A7 MTK6573 Dapeng Android phone I just purchased. The smart phone Adopts A7 Android 2.3 OS and 5.0 inch capacitive multi-touch screen to make the operation smoother and more convenient. It supports WCDMA 3G and GSM network, and supports dual SIM card. Besides, it supports wireless internet, GPS navigation and can be used to watch TV and taking pictures. With complete functions and unique design, it is a good choice for 3G smart phone.
- Operating System: Android 2.3.
- Product Category: 3G smart phone.
-CPU: MTK6573 670Ghz
- RAM: 443.3MB
- ROM: 164.1MB
Network
- Frequency Band: WCDMA / GSM850 / 900/1800 / 1900MHz.
- Network Connection: GPRS, WiFi, WAP.
Display
- Screen Size: 5 inch.
- Screen Resolution: QVGA (480 × 800pixels).
- Touch Screen: Yes, capacitive touch screen.
Storage
- Built-in Memory: 164MB.
- External Memory: MicroSD / TF card up to 32GB.
Camera
- Rear Camera: Yes.
- Pixel: 8 million pixels.
- Flashlight: Yes.
- Front Camera: Yes.
Data Transfer
- GPS Navigation: Yes.
- Wi-Fi: Yes, IEEE802.11b/g/n.
- Bluetooth: Yes.
Amusement Functions
- E-book: Yes, TXT format support.
- FM: Yes.
- Built-in Game: Yes.
- Audio Format: MP3 / M4A / MID / AMR / WAV.
- Video Format: 3GP / MP4 / AVI / MPG / RMVB / WMV.
- Image Format: JPEG / BMP / GIF / PNG.
- SNS Service: Facebook, YouTube, Twitter.
- Chord Ringtone: Polyphonic / MP3 / M4A / MID / AMR / WAV.
Other Functions - Talk Time: Up to 4 hours.
- Standby Time: Up to 200 hours.
- Earphones: Yes, a wired stereo earphones with built-in MIC and clip.
- USB cable: Yes.
- Support Languages: German, Inglés, Spanish, French, Portuguese,-Package Including:
1 * Android smart phone
1 * Wired Stereo Earphones
2 * Rechargeable Li-ion Battery
1 * USB Cable
1 * Power Adapter
1 * User Manual
1 * 8GB micro sd card good phone but try root and the screen image is not stable, it seems that is not the correct uboot.img and now the screen is distorted. if someone could help would greatly appreciate it. Please upload the file uboot.img of this phone ... Thank you.
stovals said:
- Built-in Memory: 164MB.
Click to expand...
Click to collapse
Your device seems to be a 512mb device. Please use the uboot from dump here : http://ge.tt/1qRbflF/v/0?c
angelobiz said:
hi, sorry fo my english
you must download a russian modded recovery here: ge.tt/5UwovRF/v/02
you must flash it with flash tool,...(see many guide in internet if you no know)
after you must enter in it, you pull power and vol+ together,
and install this file: ge.tt/1ili71F/v/0
after you had disabled verification of signature.
so reboot your phone
Angelo
ps
i.m newbee and no can post link.. added http//
Click to expand...
Click to collapse
I confirm this works perfect on my A7 512mb :good:, I did a factory reset before flashing the ROM partially.
Hi
I got my daughter a 7" rk3026 tablet for xmas. I was playing around with it and trying to put cwm for the 3066 on there hoping it would work but now ive bricked the recovery. It boots up fine but will not go into recovery mode. Does anyone know of a cwm or twrp that will run on this? any roms or firmware any? I can find out nothing about these tabs on the net.
Spec
Model 7“ RK3026 Android Dual Core Tablet PC
CPU Rockchip RK3026, 1.0GHz, Cortex A9 Dual Core; GPU: Mali-400 MP2
Operation System Android 4.2.2
RAM 512MB
ROM(Memory) 4GB Nand Flash
Shell Material Plastic
Screen Size 7 Inch
Type Capacitive Screen
Display LCD
Resolution 800 x 480px
Visible Angle 120°
Extend Card Support TF card up to 32GB extended
Camera Dual camera, both are 0.3 megapixels
Gravity Sensor Yes
Multi-Touch Yes, 5 points touch
Flash Support Flash 11.1
Play Store
Yes
Bluetooth No
battery 2800mAh
Any suggestions?
Cheers
Chris
i have the same tablet , my wifi connect put no internet , try to flash another frimware and now just white screen
Hello after I have some problem with stock firmware in mine tablet jay-tech 799 spec:
Display 17,8 cm (7') resistiven TFT.
Betriebssystem Android 2.3
Prozessor iMAPX210 800 MHz
Arbeitsspeicher DDR2 512MB
interner Speicher 4 GB
HDMI Ausgang
MicroSD-Kartenslot
WLAN Wi-Fi IEEE 802.11 b/g/n
eingebauter Lithium-Polymer-Akku
Frontkamera 0,3 Megapixel
Anschlüsse Mini HDMI, 2 x Mini-USB, 3.5mm
I try reflash firmware downloaded from official website bu unfortunly I have bootloop and can't enter recovery etc.
I try all rom's from je-tech.de and always get error after flash
Code:
Factory initializing ...
E:format_volume: no MTD partition "/dev/block/mmcblk2p3"
E:format_volume: no MTD partition "/dev/block/mmcblk2p5"
[...]
I try also alternative firmware downloaded form:
http://foroma.com/index.php?option=...=38:infotmix-x210-support-documents&Itemid=57
but after flash I got error system file corupted.
Can someone can help me find alternative firmware to bring to live that old usless piece of .....
Jay-tech 799
sedinix said:
Hello after I have some problem with stock firmware in mine tablet jay-tech 799 spec:
Display 17,8 cm (7') resistiven TFT.
Betriebssystem Android 2.3
Prozessor iMAPX210 800 MHz
Arbeitsspeicher DDR2 512MB
interner Speicher 4 GB
HDMI Ausgang
MicroSD-Kartenslot
WLAN Wi-Fi IEEE 802.11 b/g/n
eingebauter Lithium-Polymer-Akku
Frontkamera 0,3 Megapixel
Anschlüsse Mini HDMI, 2 x Mini-USB, 3.5mm
I try reflash firmware downloaded from official website bu unfortunly I have bootloop and can't enter recovery etc.
I try all rom's from je-tech.de and always get error after flash
Code:
Factory initializing ...
E:format_volume: no MTD partition "/dev/block/mmcblk2p3"
E:format_volume: no MTD partition "/dev/block/mmcblk2p5"
[...]
I try also alternative firmware downloaded form:
http://foroma.com/index.php?option=...=38:infotmix-x210-support-documents&Itemid=57
but after flash I got error system file corupted.
Can someone can help me find alternative firmware to bring to live that old usless piece of .....
Click to expand...
Click to collapse
Up, I have the same tablet and I have make the same procedure because with the original rom wifi and sound not work.
Now on boot I have this message "system is demaged, please try recover from external storage"
- No recovery
- No adb or fasboot connection
I have contact email Jay-Tech, but no responding
So I really need help me
my tablet go to trash already. I don't receive any reply from jay tech till now, so don't count on it.
http://goo.gl/awA9GT
http://goo.gl/DCPx9X
Should be able to find something there.
more
es0tericcha0s said:
http://goo.gl/awA9GT
http://goo.gl/DCPx9X
Should be able to find something there.
Click to expand...
Click to collapse
Thanks for repply
After a bad flash, this methode doesn't work (I think u-boot.bin is corrupted)
The sdcard is scan but installation don't start
So we need u-boot.bin, android_boottext, ...
The model exact is Jay-Tech PI799 (same Kliver PI799)
Edit: I find another clone (Smart Touch X210 & Overmax OV-TB-02) maybe they are the solution for us.
donwload mode for jaytech?
does anybody know how to get the jaytech 799 tablet into download mode? help pls!
Hello Friends
Sorry for my bad English, I use google translator
I have the Caterpillar CAT B15Q dual sim
Processor: Media Tek, MT6582M QUAD CORE 1.3Ghz
Android 4.4.2 KitKat
ROM Flash: 4 GB
RAM: 1 GB
Extended Storage: Micro SD Up to 32 GB
I have make ROOT with Kingo Android Root - everything worked very well untilwhen i have unwittingly deleted white sim card icon with small circle gear.
Unfortunately, I have not done before any backup.
First smartphone stops responding so I turned him off ... after restarting appears only the logo CATB15Q welcome ...
and that's all. Hangs on the splash logo.
When I press the POWER button and the VOL + appears in the Android system recovery <3e>
After taking a wipe data / factory reset the phone sometimes handled exclusively but not functioning properly. Is seen by the computer.
Is it possible to somehow fix it? Are possible going to work support 2 SIM cards ? Is it possible to upload to it was something else, for example Android version 4.3. ?
Would someone please upload a cwn backup or a link for b15q rom, or B15Q_GENE_DS_1.019.000 because its nowhere to find
This is my first android phone
I don't really know what to do next ...
For all the help I would be very grateful
Hi,
I'm having big problem by low level format of my tablet RK3188(chip) have no idea of model is 10' one.
I'm looking to make a flashable img files from my backup CWM recovery to use with Android tool since my tablet is unknown
china with RK3188 chip.
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP
Recovery, system, boot, kernel are large files in cwm I need to make them smaller (proper size) to use with Android tool. Please correct me if I'm wrong and tell me if its possible or any other way to get to my CWM .I just need to get to recovery. Please help.
Many thanks for your time.
styropian said:
Hi,
I'm having big problem by low level format of my tablet RK3188(chip) have no idea of model is 10' one.
I'm looking to make a flashable img files from my backup CWM recovery to use with Android tool since my tablet is unknown
china with RK3188 chip.
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP
Recovery, system, boot, kernel are large files in cwm I need to make them smaller (proper size) to use with Android tool. Please correct me if I'm wrong and tell me if its possible or any other way to get to my CWM .I just need to get to recovery. Please help.
Many thanks for your time.
Click to expand...
Click to collapse
Update __
RK3188 adb is running no screen__help PLEASE
After erasing IDB in my unknown china tablet and loosing my whole system I was able to load different custom firmware from Chuwi v88 + different kernel and my Tab popup in windows showing 2 extra drives F and G.I did open android studio and notice access to adb and all activity in my android.The RKandroidTool also recognizing my tab.
No reaction to power button only automatically connecting to my comp ( black screen on my tab).
I have original CWM backup of my device.
Can someone advise me how to access recovery from this point or find the way to completely start my tablet.Maybe is possible to recover CWM from adb?I will need some help to use a proper commands perhaps in adb.