Hi,
I'm running on CM 11-20131212NIGHTLY-i9300.
I want to change back to stock rom, but i cant find my phone model.
USSD codes dont work, apps that should be able to find it dont work.. im in a loss here...
Provider is T-mobile (NL)
-can a mod move this to Q&A?-
tuumke said:
Hi,
I'm running on CM 11-20131212NIGHTLY-i9300.
I want to change back to stock rom, but i cant find my phone model.
USSD codes dont work, apps that should be able to find it dont work.. im in a loss here...
Provider is T-mobile (NL)
Click to expand...
Click to collapse
hey,
u are on the wrong forum. Question should go to Q&A forum (obviously)
however, i checked on Sammobile and it looks the latest stock firmware for T-Mobile Netherland is:
Android 4.1.2
GT-I9300 Galaxy S III
PDA: I9300XXEMU8
CSC: I9300TNLEMU5
MODEM: I9300BOEMU1
Added: 2013-11-17
Raulinho7 said:
hey,
u are on the wrong forum. Question should go to Q&A forum (obviously)
however, i checked on Sammobile and it looks the latest stock firmware for T-Mobile Netherland is:
Android 4.1.2
GT-I9300 Galaxy S III
PDA: I9300XXEMU8
CSC: I9300TNLEMU5
MODEM: I9300BOEMU1
Added: 2013-11-17
Click to expand...
Click to collapse
tuumke said:
Hi,
I'm running on CM 11-20131212NIGHTLY-i9300.
I want to change back to stock rom, but i cant find my phone model.
USSD codes dont work, apps that should be able to find it dont work.. im in a loss here...
Provider is T-mobile (NL)
Click to expand...
Click to collapse
Search Q&A section you're sure to find what you need in there
also in future always remember to create a backup of original rom before flashing!
Most Quides will PREACH this!
Raulinho7 said:
hey,
u are on the wrong forum. Question should go to Q&A forum (obviously)
however, i checked on Sammobile and it looks the latest stock firmware for T-Mobile Netherland is:
Android 4.1.2
GT-I9300 Galaxy S III
PDA: I9300XXEMU8
CSC: I9300TNLEMU5
MODEM: I9300BOEMU1
Added: 2013-11-17
Click to expand...
Click to collapse
But, can i just flash that rom then?
I thought CSC code was important to have before flashing..
tuumke said:
But, can i just flash that rom then?
I thought CSC code was important to have before flashing..
Click to expand...
Click to collapse
No and i suggest you read the basic faqs and guides before flashing anything otherwise you are heading for a brick.
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
.
tuumke said:
But, can i just flash that rom then?
I thought CSC code was important to have before flashing..
Click to expand...
Click to collapse
You need to look on Sammobile, download the latest version from there and flash via odin,
http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=TNL#firmware
Related
I Have Bought A Box Packed Galaxy S 2.
And I Have Rooted It Also.
After *#1234# On It:
PDA: I9100XWKE7
Phone: I9100XXKDJ
CSC: Unknown .
Now My Phone Is Not Recognised In My PC And Also I Am Irritated Of The Yellow Traingle On Boot Screen.
Please Help Me Out As I want to transfer games and music on my phone...
please some one reply....
Don't know why your PC won't recognize the device, the triangle means that you'r running a non samsung signed kernel! Flash back your stock kernel (look in dev section how), then the triangle will be gone (you won't loose root)!
Sent from my GT-I9100 using XDA Premium App
but where can i find the stock kernel and what about the recognition on pc why its not recognised...??
as I said, search for the stock kernel in the development section there is a post with all the kernels, should not be too hard to find
regarding the connection issue:
reboot your pc, reboot your device, check the usb connection type in the gs2 taskbar (you have to activate usb mass storage each time you want it), if all fails: go into win device manager and reinstall the driver(s)!
Sent from my GT-I9100 using XDA Premium App
is ke7 firmware ok with my device or should i come back to ke4 or ke2...?
ke7 works well here, so I think it should be ok for you too!
Sent from my GT-I9100 using XDA Premium App
i cant find that stock kernel please help me out...
sunnysadnani said:
i cant find that stock kernel please help me out...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1075278
jje
and one more thing i am not able to find good 3d games for my phone...
so..?
sunnysadnani said:
and one more thing i am not able to find good 3d games for my phone...
so..?
Click to expand...
Click to collapse
what games its a phone i dont play games since i left skool .
jje
JJEgan said:
what games its a phone i dont play games since i left skool .
jje
Click to expand...
Click to collapse
loool......I quit studying since i left school, but i never quit playing games
so tell me na...
good source for HD games for my device...
The app store..
Or google is your friend. Support the devs either way
Csc is to do with regions... Maybe the way you rooted made you install a csc which isnt relevant to your region. There is a thread in the dev section that explains it all. Use the search bar
from my kingy SGS2. charrrz a bhorrrz
CSC Unknown
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Hi all,
It's my 1st post in XDA-developers & I would really appreciate your help. I have the following Samsung Galaxy SII:
PDA: I9100JPKG3
Phone: I9100XXKG1
CSC: Unknown
Kernel version:
2.6.35.7-I9100JPKG3-CL388633
[email protected] #2
I have fully read the thread originally put by Intratech in the developers section but I couldn't post there since I'm still a new member! Can you please help me answering these Q's:
1. I couldn't find the firmware JPKG3 neither on the official firmwares section nor on the Frankenstein one! Does this mean, I'm running an unofficial firmware?
2. The CSC is unknown, I read a post also by Intratech providing the CSC file: "csc_xsg_i9100ojpkg1" & using Odin to flash my SGSII. I obtained the file, so is it possible to flash it to my device? And if I flash it, will I solve such an issue? Do I need to backup my data? Will the data be wiped out?
3. The kernel version of my device is weird? Is it a rooted device although I bought it from an original reseller of Samsung in my country?
4. In the thread of Intratech, I found a newer version JPKG5 for XSG (UAE). Is it possible to flash it to my device, will it solve the CSC & Kernel issues, while updating the firmware as well?
5. Finally, based on the steps posted by Intratech, will the firmware update wipe out my device data? Can you please confirm?
Thank you so much & waiting for your help.
Any help pleasssssssssssssssssse?
Hi all,
just upgraded from SGS2 -> SGS3 and my new SGS3 is a:
GT-I9300 (model)
4.0.4 (android)
I9300BVLG1 (baseband)
I9300XXBLG8 (build)
I'd like to upgrade to 4.1.1 but use a unbranded Samsung stock ROM and I found loads of different ones at:
http://forum.xda-developers.com/showthread.php?t=1835931&highlight=official+rom
But which one do I choose?
I took a guess and started to download:
I9300XXDLI8 Download (Thanks To SamMobile.com)
Base Firmware: I9300XXDLI8 (4.1.1)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 15 September 2012
Modem: XXDLI8
CSC: OXADLI8
Change List: 178140
Will that one work on my S3? I'm a bit of a noob here on S3 land but I have been flashing and rooting on my S2 all successfully, but all these versions are a bit confusing and I have tried to search for some explanations on these different versions but I haven't really found anything, could someone please help?
Thanks in advance
Any I9300 stock rom would basically work. Just choose one for your region at Sammobile! You have to register, but it has all the stock FW you'll need.
Just make sure you flash the right one in ODIN under PDA with all the checkmarks as it, DO NOT TICK REPARTITION or anything else.
If you want to root afterwards, flash CWM, and then SuperSU/SuperUser, which one is just preference. I personally prefer SuperSU.
Any will do
Just go sammobile website download latest stock rom for your country
Else slowly ota update to jellybean if you haven't root
Sent from my GT-I9300 using xda premium
guvno said:
Hi all,
just upgraded from SGS2 -> SGS3 and my new SGS3 is a:
GT-I9300 (model)
4.0.4 (android)
I9300BVLG1 (baseband)
I9300XXBLG8 (build)
I'd like to upgrade to 4.1.1 but use a unbranded Samsung stock ROM and I found loads of different ones at:
http://forum.xda-developers.com/showthread.php?t=1835931&highlight=official+rom
But which one do I choose?
I took a guess and started to download:
I9300XXDLI8 Download (Thanks To SamMobile.com)
Base Firmware: I9300XXDLI8 (4.1.1)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 15 September 2012
Modem: XXDLI8
CSC: OXADLI8
Change List: 178140
Will that one work on my S3? I'm a bit of a noob here on S3 land but I have been flashing and rooting on my S2 all successfully, but all these versions are a bit confusing and I have tried to search for some explanations on these different versions but I haven't really found anything, could someone please help?
Thanks in advance
Click to expand...
Click to collapse
I'm from Argentina, using Movistar carrier phone. I've decided to use the last stock firm from UK, usually gots the latest firms updates, my recomendation, update to UK (BTU) from sammobile, then, root the phone, then, install triangle away, it will reset the counter for CFW. This time reset the samsung galaxy csc from the google play store, this will wipe your phone and reset to the desire country, select UK. Finally now you can check that your phone looks original, and is updateable with kies
Unsecure kernel for I9300XXDLJ4
Thanks for all the replies!
So I'll get the UK (BTU) I9300XXDLJ4 FW from Sammobile, I've flashed before using ODIN so that wont be a problem, but I'd like to root as well afterwards, anyone knows where I can find a unsecure kernel for I9300XXDLJ4 ?
Thanks again
guvno said:
Thanks for all the replies!
, anyone knows where I can find a unsecure kernel for I9300XXDLJ4 ?
What on earth do you want that for ???
jje
Click to expand...
Click to collapse
JJEgan said:
guvno said:
Thanks for all the replies!
, anyone knows where I can find a unsecure kernel for I9300XXDLJ4 ?
What on earth do you want that for ???
jje
Click to expand...
Click to collapse
To root, using the below guide:
http://forum.xda-developers.com/showthread.php?t=1671969&highlight=stock+rom
That's how I used to root my S2, always worked great
Click to expand...
Click to collapse
An old extinct post your choice .
As it says .
This thread is left here only for historical purposes ! Now that the device has been released, easier and better methods have been developed to gain root, like CF-Root.
CF Root is the normal method .
jje
JJEgan said:
An old extinct post your choice .
As it says .
This thread is left here only for historical purposes ! Now that the device has been released, easier and better methods have been developed to gain root, like CF-Root.
CF Root is the normal method .
jje
Click to expand...
Click to collapse
Jepp, you're right, didn't notice that, so I went to your suggested post and also noticed:
'I am no longer supporting this version of CF-Root. I have personally moved away from permanent custom recoveries. I will still be providing roots by way of CF-Auto-Root (click). The downloads in this thread will remain available, I just won't be updating them..'
Hence I continued to the "CF-Auto-Root" link:
http://forum.xda-developers.com/showthread.php?t=1957273
Which did the job just fine! Many thanks for the suggestion.
Just one thing, I thought I'd be getting that 'Yellow Triangle' and I would have to use the "remover" but I'm not seeing didn't, so I haven't used the "remover". So all I've done if flashed the 'I9300XXDLJ4' (BTU) ROM/FW and then the 'CF-Auto-Root-m0-gti9300.zip'
can anyone tell me if my S3 is now recognized as a "normal upgradable" phone by Kies ?
Thanks again
What yellow triangle this is SGS3 not SGS2 .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
Upgrade via Kies sorry never use Kies/Ota so no idea .
jje
JJEgan said:
What yellow triangle this is SGS3 not SGS2 .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
Upgrade via Kies sorry never use Kies/Ota so no idea .
jje
Click to expand...
Click to collapse
Ah, ok, so no yellow triangle on SGS3 then, thanks.
I suppose I'll still use the remover/cleaner to '0' the counter and I'll just have to see about Kies/OTA when Samsung releases 4.1.2.
Thanks for all the assistance and help!
i found the issue with network lock for the stock 4.1.2 .. its a protection from samsung [(just flash 4.0.3 stock via odin and unlock with galaxy s unlock)( source sammobile )] . anyway .. there , i found the new firmware for odin , in 3 files :
PDA: I9100XXLSJ
CSC: I9100OXXLS1
MODEM: I9100XXLS6
i dont know which one is for network but cant we use another modem or csc so they wont lock our damn network ?
http://www.sammobile.com/2012/11/15/i9100xxlsj-–-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
look over comments . alot of peoples have that problem.
thanks
Firstly, The sim lock in new stock fw has already been discussed OVER AND OVER again already and its EASILY unlockable via simple app. Look before you post.
yes but i didnt found anyone saying to flash 4.0.3 first.. so it will re-lock the network after restart.. so is there any fix ? i wanna use this few days..
Find it in themes and apps section
Sent from my GT-I9100 using xda premium
VDubG said:
yes but i didnt found anyone saying to flash 4.0.3 first.. so it will re-lock the network after restart.. so is there any fix ? i wanna use this few days..
Click to expand...
Click to collapse
As I already told you and as is already discussed again and again this is easily fixable via a unlock APP.
If you want to know what app is called use search.
hi,my name is gaurav and am from india.I own a SGS3GT I9300 with the following:-
GT-I9300 Galaxy S III
PDA: I9300XXEMG5
CSC: I9300ODDEMG1
MODEM: I9300DDEMG2
after flashing a few roms and loosing my IMEI in the process and then with a lot of help from rootSU i was able to get my phone working again,although i have come to an uderstanding that i've to keep my baseband to MG2 only but my problem is how to check the baseband in any of the roms with so many roms available for flashing(i've been told to look into the thread but in some cases i couldn't find the baseband)
is there a system of naming the roms which i obviously don't know which gives an indication of the baseband and how does one comes to know whether a roms has baseband or not
help
thanks in advance....
gauravinvouge said:
hi,my name is gaurav and am from india.I own a SGS3GT I9300 with the following:-
GT-I9300 Galaxy S III
PDA: I9300XXEMG5
CSC: I9300ODDEMG1
MODEM: I9300DDEMG2
after flashing a few roms and loosing my IMEI in the process and then with a lot of help from rootSU i was able to get my phone working again,although i have come to an uderstanding that i've to keep my baseband to MG2 only but my problem is how to check the baseband in any of the roms with so many roms available for flashing(i've been told to look into the thread but in some cases i couldn't find the baseband)
is there a system of naming the roms which i obviously don't know which gives an indication of the baseband and how does one comes to know whether a roms has baseband or not
help
thanks in advance....
Click to expand...
Click to collapse
the question should be phrased as "how will i know which rom has a modem also flashed along with it."
DDEMG2 modem flashable zip
flash any rom (firmware version above MG2) if your baseband changes flash the above modem. baseband will return to ddemg2.
If its a stock rom modem is named .
If its a custom rom it may not have a modem .
You would be far better off not flashing any rom if your phone is now working .
jje
MoonBlade said:
the question should be phrased as "how will i know which rom has a modem also flashed along with it."
DDEMG2 modem flashable zip
flash any rom (firmware version above MG2) if your baseband changes flash the above modem. baseband will return to ddemg2.
Click to expand...
Click to collapse
Thanks for the zip file.
I've understood a lot with your help and now only tell me this firmware version above mg2 you are referring to is for PDA,CSC OR MODEM and this is flashable via odin or cwm.?.One more thing i read about coding of samsung and according to that my country code is DD so what does XX signifies in my PDA???.I know it's irritating but a little help from you will go a long way in making me understand......
thanks in advance
JJEgan said:
If its a stock rom modem is named .
If its a custom rom it may not have a modem .
You would be far better off not flashing any rom if your phone is now working .
jje
Click to expand...
Click to collapse
lol i do agree although not totally what's the fun in taking a bit of risk and with extensive guides on this and experts like you am increasing my knowledge base...
thanks in advance
gauravinvouge said:
Thanks for the zip file.I've understood a lot with your help and now only tell methis firmware version above mg2 you are referring to is for PDA,CSC OR MODEM.One more thing i read about coding of samsung and according to that my country code is DD so what does XX signifies in my PDA???.I know it's irritating but a little help from you will go a long way in making me understand......
thanks in advance
Click to expand...
Click to collapse
When i say mg2 i am referring to pda
XX=Country code (for indian firmware pda will have DD .. but you can use any firmware version.. country specific firmwares help in region specific updates from samsung)
M=year (A=2001 B=2002 and so on.. so M= 2013)
G=month (A=jan B=feb c=mar and so on.. so G=July)
2=revision number
All this have been answered 100s of time.. if u had read sticky threads in general section you would have seen them..
since i had free time i replied others would have just ignored you !
MoonBlade said:
When i say mg2 i am referring to pda
XX=Country code (for indian firmware pda will have DD .. but you can use any firmware version.. country specific firmwares help in region specific updates from samsung)
M=year (A=2001 B=2002 and so on.. so M= 2013)
G=month (A=jan B=feb c=mar and so on.. so G=July)
2=revision number
All this have been answered 100s of time.. if u had read sticky threads in general section you would have seen them..
since i had free time i replied others would have just ignored you !
Click to expand...
Click to collapse
that's what it is everybody thinks one doesn't read,had i not read i would not have been able to restore my efs and not known about country code...only thing is the more one reads the more one discovers his ignorance ........
but anyways so by your explanation my pda should have been DDEMG5 but it's XXEMG5 at the moment and i've checked it from sammobile and xda also that XXEMG5 is the latest firmware for gti9300 in india. So what's wrong?
and i think the zip file will be used in CWM only?
gauravinvouge said:
that's what it is everybody thinks one doesn't read,had i not read i would not have been able to restore my efs and not known about country code...only thing is the more one reads the more one discovers his ignorance ........
but anyways so by your explanation my pda should have been DDEMG5 but it's XXEMG5 at the moment and i've checked it from sammobile and xda also that XXEMG5 is the latest firmware for gti9300 in india. So what's wrong?
and i think the zip file will be used in CWM only?
Click to expand...
Click to collapse
latest firmware for india has csc and modem starting with dd so its fine...
i think u have to use odin to flash sammobile firmwares. i have never tried myself
http://forum.xda-developers.com/showthread.php?t=1671969
Hi Guys
I have my phone in Ireland Vodafone. I'm thinking about switch to unbranded rom. The problem is: there is no any unbranded rom for Ireland or I know nothing about it. So, my question is: can I download unbranded rom for UK and flash using Odin? Do I need do something before or after flash? I know there is something like CSC for every Country. Do I need do something with that?
My CSC: I9300VFGEMF1
One more thing my phone is not rooted and I do not need to root it. Can I do whole operation without root?
This is the wrong forum use Q&A.
Please read the faqs and guides first .
Roms are on sammobile.com and samsung-updates.com
UK rom can be flashed using Odin .
JJEgan said:
This is the wrong forum use Q&A.
Please read the faqs and guides first .
Roms are on sammobile.com and samsung-updates.com
UK rom can be flashed using Odin .
Click to expand...
Click to collapse
Sorry about that, clould you please move thread to right place ?
karcio said:
Sorry about that, clould you please move thread to right place ?
Click to expand...
Click to collapse
Use the red triangle report button and ask a mod