Hi,
Recently i had an Samsung Galaxy Ace GT-S5839i, and when im trying to change for a custom rom (Razord Droid v2.5 on this forum) the phone bricks on the screen "Samsung Galaxy Ace GT-S5839i" when i try to turn him on, so i cant go to recovery mode to install another one, the only thing i can do with the phone is to put him on download mode, so i used de odin to flash de stock rom (Vodafone PT on sammobile), but always happends this error when i'm trying.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULI1_S5839iTCLLE1_S5839iBULI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I already try to use another USB port, another cable, another PC, another ROM and the result is the same.
Anyone can help me with that ?
Reply
gadelhasss said:
Hi,
Recently i had an Samsung Galaxy Ace GT-S5839i, and when im trying to change for a custom rom (Razord Droid v2.5 on this forum) the phone bricks on the screen "Samsung Galaxy Ace GT-S5839i" when i try to turn him on, so i cant go to recovery mode to install another one, the only thing i can do with the phone is to put him on download mode, so i used de odin to flash de stock rom (Vodafone PT on sammobile), but always happends this error when i'm trying.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULI1_S5839iTCLLE1_S5839iBULI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I already try to use another USB port, another cable, another PC, another ROM and the result is the same.
Anyone can help me with that ?
Click to expand...
Click to collapse
Hello there!
I am knew to the android stuff, but I have flashed a new rom to my Galaxy Ace S5839i and now in the log screen appears S5830i. But it works so it's good for now.
Answering to your question I got that error too, I've downloaded a new Odin and a new rom to flash (like I said, know Appears S5830i on log screen) and it worked.
I know it's not much of an answer but I'm just trying to help, I wish you can sort it out.
All the best to you.
Hey Guys,
i guess i need your help. I've flashed diffrent ROM's with Odin before so i got an rough idea how it works.
Story so far:
GT-I9100 4.1.2 Official ROM (I9100XWLSD_I9100DBTLS7_DBT) with PhilZ Kernel (PhilZ-cwm6-XWLSD-OXX-4.87).
Phone swithed itself off for any reason and i tried to reboot it. Phone started up and was stuck at the screen with "Samsung Galaxy S II". Nothing happened for like an hour. After waitin i decided to flash the ROM again. And here it just got worse.
Using Odin3 v1.85 (Kies tasks killed, original samsung usb cable) i selected the ROM mentioned above and tryed to flash it. At first everything was running good, but the i got stuck at:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
i left it for half an hour or even more... nothing happened. I tried to flash Philz Kernel again, but i got stuck too.
Same for ICS ROM and GB.
I can't get into recovery mode (which i should have done before thinking of flashing stuff )
Download mode is all i can choose now. I'm not getting any further right now.
Can anyone help me with this? I'm quite bummed out. I need my phone
Thanks in advance.
Daniel.
i.am.dirt said:
Using Odin3 v1.85 (Kies tasks killed, original samsung usb cable) i selected the ROM mentioned above and tryed to flash it. At first everything was running good, but the i got stuck at:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
i left it for half an hour or even more... nothing happened. I tried to flash Philz Kernel again, but i got stuck too.
Same for ICS ROM and GB.
I can't get into recovery mode (which i should have done before thinking of flashing stuff )
Download mode is all i can choose now. I'm not getting any further right now.
Click to expand...
Click to collapse
Odin flash fails? Check out this guide:
http://forum.xda-developers.com/showthread.php?t=2345831
immortalneo said:
Odin flash fails? Check out this guide:
http://forum.xda-developers.com/showthread.php?t=2345831
Click to expand...
Click to collapse
Thanks for that fast reply. I've skimmed over that guide and i have to say i've already tryed nearly all of it... that's a bad sign, huh?
I'll try diffrent Odin versions but i've been reading nearly everywhere that v1.85 is the correct version for my GT-I9100...
i.am.dirt said:
Thanks for that fast reply. I've skimmed over that guide and i have to say i've already tryed nearly all of it... that's a bad sign, huh?
I'll try diffrent Odin versions but i've been reading nearly everywhere that v1.85 is the correct version for my GT-I9100...
Click to expand...
Click to collapse
It wouldn't hurt to try then, would it?
Believe me when I say this, but a lot of members have reported this issue before, which led to the creation of the above guide. And its instructions are based to an extent on the successes reported by some members. So try all you can and see what happens! :good:
I've tried to figure it out to what extend different ODIN versions will give different results. Here's what i've been encountered with:
v1.3:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Enter CS for MD5..
<ID:0/007> Check MD5.. Do not unplug the cable..
<ID:0/007> Please wait..
<ID:0/007> Checking MD5 finished Sucessfully..
<ID:0/007> Leave CS..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.img
got stuck at cache.img
v1.83:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.img
got stuck at cache.img
v1.85:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
same sh!t here
v3.04:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
what a surprise!
v3.06:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
failed for any reason
v3.07:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
it doesn't get any better
Seriously what is going on with that device?
Seems like it doesn't matter which ODIN version i use... the results are poor.
Any suggestions?
i.am.dirt said:
Seriously what is going on with that device?
Seems like it doesn't matter which ODIN version i use... the results are poor.
Any suggestions?
Click to expand...
Click to collapse
Keep trying out everything in that guide and in every possible combinations you can, until you're absolutely sure that your phone's NAND is borked. Then take it to a Service Centre.
Flash a packaged ROM (modem, code & csc) with the 3.06 version.
Sent from...this is not even my S2
i91000 brick at cache
Any ideas for this thread ? I have a simmilar problem, my i9100 can't flash any software any kernel ?
milo_sc said:
Any ideas for this thread ? I have a simmilar problem, my i9100 can't flash any software any kernel ?
Click to expand...
Click to collapse
i have same problem with my s2. did you fix it ? please reply fast
Same issue. Was this ever resolved? I can't even get the tablet to stay powered off now!
NickSaul said:
Same issue. Was this ever resolved? I can't even get the tablet to stay powered off now!
Click to expand...
Click to collapse
Has anyone tried gastonw's advice yet?
I was having the exact problem described in the original post on my Galaxy Note Pro 12.2 (SM-P900 wifi). I was able to fix my device by flashing TWRP through Odin. This allowed me to reboot my device as normal.
After I was able to boot back into my device, I went into developer options and realized that USB Debugging was NOT enabled. I ticked the box and reset back into Download mode. This time, the Odin flash went smoothly and quickly and I now have a rooted Note Pro 12.2.
So for those of you who are having Odin fail at flashing cache.img, try my solution and let me know if it works.
#1. Download TWRP (I got mind from the official TWRP website)
#2. Flash TWRP through Odin in the same method that you flashed CF Auto Root
#3. Boot into your device normally and open Developer Options in the Settings Menu
#4. Enable USB Debugging
#5. Connect your tablet to your PC
#6. A pop-up window will arise on your tablet asking to Allow the connected computer to debug your tablet; tap OK to Allow it
#7. Reboot into download mode
#8. Reflash CF Auto Root using Odin
These steps worked for me so hopefully they can help someone else out as well
justb2 said:
I was having the exact problem described in the original post on my Galaxy Note Pro 12.2 (SM-P900 wifi). I was able to fix my device by flashing TWRP through Odin. This allowed me to reboot my device as normal.
After I was able to boot back into my device, I went into developer options and realized that USB Debugging was NOT enabled. I ticked the box and reset back into Download mode. This time, the Odin flash went smoothly and quickly and I now have a rooted Note Pro 12.2.
So for those of you who are having Odin fail at flashing cache.img, try my solution and let me know if it works.
#1. Download TWRP (I got mind from the official TWRP website)
#2. Flash TWRP through Odin in the same method that you flashed CF Auto Root
#3. Boot into your device normally and open Developer Options in the Settings Menu
#4. Enable USB Debugging
#5. Connect your tablet to your PC
#6. A pop-up window will arise on your tablet asking to Allow the connected computer to debug your tablet; tap OK to Allow it
#7. Reboot into download mode
#8. Reflash CF Auto Root using Odin
These steps worked for me so hopefully they can help someone else out as well
Click to expand...
Click to collapse
Thx! good answer for unbricking my phone but... still get the same error with enabled debugging mode
CryserCore said:
Thx! good answer for unbricking my phone but... still get the same error with enabled debugging mode
Click to expand...
Click to collapse
I have the same problem with my s3 neo! I tried to root my phone with Odin , and phone now is bricked. Firat i have installed TWRP , und everything was fine. Than , i tried to flasch superuser to get my phone rooted. Now i can´t reach TWRP (??) , and only thing that i can do ist download mode.
I am tryin to flasch stock firmware through Odin, but ever the same - cache.img error! Help please!
Hi
Please anyone help me
I am also having the same error. It stucks at cache.img. I am trying I9100XWLPT_I9100XXLQ6_I9100XEULPA_HOME.tar.md5 downloaded from sammobile.com
My model is GT-I9100 .
Can anyone help please ?
Earlier , i was having cm-12.1-20151116-SNAPSHOT-YOG7DAO1JN-i9100.zip and one day, it all gone bad. I can only use Odin mode.
I cannot even go to Recovery mode.
I tried boot.bin alone and that runs fine and it shows me Samsung logo screen.
I then tried renaming cache.img to cache.img.tar and that also runs fine .
But overall, it does not run when i think it tries to write to Nand or whatever.
I have tried all version of odin and various cables as well.
Any help will be hugely appreciated.
best regards
I had the same problem.....resolved it by extracting the tar.md5 file to the c:/ directly instead of the desktop...
Yo.
Had the same issue on the GT-I9506.
The issue occurred for me after I had accidentally attempted to flash an auto-root file to bootloader in ODIN, can confirm that flashing CWMR as through PDA solved my issue, as I was then able to flash the same auto-root file direct through PDA.
Hope this helps somebody, as I wasted an hour ****ing around trying to figure out how to fix. ^^
Hi to all! First of all, I am sorry if I put my problem in wrong forum. I'm new here...
I was trying to install Android Jelly Bean 4.2.2 firmware (I9105PXXUBMI3_I9105POXXBMJ1_I9105PXXUBMI1_HOME.tar.md5) on my Galaxy SII Plus via Odin_v3.09. Unfortunately, I put firmware file in field BL (in previous versions of Odin it was Bootloader) instead of AP. Odin finishes with status FAIL. Complete log is below:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBMI3_I9105POXXBMJ1_I9105PXXUBMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> vc-firmware.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that, phone is stuck in Download mode. I can't restart it, turn it off or boot it in recovery mode. All I can do is to boot it in download mode again or I get message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" (which, by the way, doesn't work because it Kies cannot see the phone in this state).
Any help would be much appreciated! Thanks guys!
I tried reverting from Cyanogenmod to official firmware. Whilst flashing my dog jumped on my I9105P and disconnected my phone. Now when i connect it to a charger or USB port it says "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again". Tried flashing with Odin but i get this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBNG1_I9105PVVTBNG1_I9105PXXUBNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also can't go to download mode. It says "Low battery, can't download". I left it to charge all night.
Help?
hi guys,
my phone is soft-bricked and it freezes samsung logo screen on the startup.
How can I enable usb debugging mode on this situation ? Do you have any solution ??
My phone is: Samsung Galaxy S3 GT-I9300 International..
husamba said:
hi guys,
my phone is soft-bricked and it freezes samsung logo screen on the startup.
How can I enable usb debugging mode on this situation ? Do you have any solution ??
My phone is: Samsung Galaxy S3 GT-I9300 International..
Click to expand...
Click to collapse
There is no way how to enable USB debugging mode if is device soft bricked.. Download official FW ,then go to download/bootloader mode and flash it via Odin.
DejVidKo said:
There is no way how to enable USB debugging mode if is device soft bricked.. Download official FW ,then go to download/bootloader mode and flash it via Odin.
Click to expand...
Click to collapse
Hi DejVidKo,
I just get official FW from sammobile, I went to download mode and I am getting an error like below on ODIN. Do you have any guess about what I am doing wrong.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
husamba said:
Hi DejVidKo,
I just get official FW from sammobile, I went to download mode and I am getting an error like below on ODIN. Do you have any guess about what I am doing wrong.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If you have another version of Odin,try Odin v3.04
DejVidKo said:
If you have another version of Odin,try Odin v3.04
Click to expand...
Click to collapse
No wayyy. I tried it too. And I am getting same error. There are more than one rom in sammobile. May I download the wrong rom from sammobile.. :S
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)