Related
Need some advice please
Any Flyer member who can advice me please?
Buyed a WIFI Flyer 16Gb Gingerbread stock no rooted turned on and suddenly turned off and got stuck in black screen (with some light in the back) vol down + power, nothing.
battery has 100% charge, but red led turned on and off ocasionally.
Any advice how to revive it would be greatly apreciated!
Thanks in advance,
Soft reset - Hold down power button only. Keep holding until tablet resets. You should know when this happens. You can't bring it up in bootloader/recovery (down vol. + power), until it's first actually turned off.
Does your PC recognize a device being plugged in when you connect
Sent from my HTC Flyer P510e using xda premium
.
Thanks for your replies:
It didnt work pressing only vol dow for a while, or presing only power button, it never rests.
Just behind power button a green mini led is turned on now all the time, probs started when removed back to insert sd card.
Tooked off to make some tests but now still nothing...
If connecting to PC nothing happens...not detected...no asking for install drivers
Any other advice?
Thanks in advance!
orb3000 said:
Thanks for your replies:
It didnt work pressing only vol dow for a while, or presing only power button, it never rests... probs started when removed back to insert sd card.
If connecting to PC nothing happens...not detected...no asking for install drivers
Any other advice?
Thanks in advance!
Click to expand...
Click to collapse
Take off back cover... Remove SD card... Try to reset again, power btn only, hold down 20 to 30 secs., don't use volume btn.
Nothing happens
i would suggest trying to globatron's attention. if anyone on this board would know what to do it would likely be him
orb3000 said:
Nothing happens
Click to expand...
Click to collapse
I would agree with mcord11758... Still...
orb3000 said:
battery has 100% charge, but red led turned on and off occasionally.
Click to expand...
Click to collapse
A red led isn't going to show with a 100% power condition. Later you wrote...
orb3000 said:
It didn't work pressing only vol down for a while, or pressing only power button, it never rests. Just behind power button a green mini led is turned on now all the time...
Click to expand...
Click to collapse
(doesn't make sense to me) A green led can't show unless the tablet is plugged into a power source and the battery actually is 100%...
If yours is a stock unit with a stock rom (and isn't defective), I would suspect a low battery condition that can't reset/reboot for lack of power...
Suggest you plug it into the wall and try the reset procedure again, and if still a failure, (maybe you can get some help from globatron or) call HTC.
...and then again, as I've read in other threads (that you've also seen), maybe all that's needed is a battery disconnect & reconnect. - Hope you get those pics, and if so... make it a last course of action, as you'll have no warranty if you do it.
Thanks.
Update:
I left computer connected to Flyer all night, and the day after it was turned off, then unplugged from PC and plugged it again, PC recognized the tablet and after that I ran the stock RUU, now it´s stuck on the process as it has been more than 20 minutes and progress bar in computer is at 100% with the following legend:
sending..........
updating the Rom image on your android phone
It is stuck there, how much should I wait? or if you recommend to do something else?
Thanks in advance for all your help.
UPDATE: RUU failed, says I have the wrong image, finished, exited and rebooted normally!
Now working, but I´m afraid to open the cover to insert my sd as the last time it was when it was turned off
Orb,
That sounds like it when into DL mode. On the flyer once you get out of DL mode it's normally fine after that. It seems to be random, mine did it once or twice, leedroid has seen it as have a few others.
After it boots again it goes back to normal.
Hi mate,
Thanks for your reply.
Very strange behavior. After all above mentioned I was able to use is perfect, even updated to OTA Honeycomb all went ok, installed some apps, etc.
Then decided it was time to test again to remove the cover and install my sd card, just in the minute I touched the back , not even finished of removing, and Flyer went screen off, now again I can´t turn it on. Could be a short circuit or something?
I will leave it connected to wall charger for the night and hopefully tomorrw will be able to turn it on again....
I swear never again to remove the back cover
PS: I checked battery level before all this and it was in 77%, now red led on power button is on...
globatron said:
Orb,
That sounds like it when into DL mode. On the flyer once you get out of DL mode it's normally fine after that. It seems to be random, mine did it once or twice, leedroid has seen it as have a few others.
After it boots again it goes back to normal.
Click to expand...
Click to collapse
orb3000 said:
Hi mate,
Thanks for your reply.
Very strange behavior. After all above mentioned I was able to use is perfect, even updated to OTA Honeycomb all went ok, installed some apps, etc.
Then decided it was time to test again to remove the cover and install my sd card, just in the minute I touched the back , not even finished of removing, and Flyer went screen off, now again I can´t turn it on. Could be a short circuit or something?
I will leave it connected to wall charger for the night and hopefully tomorrw will be able to turn it on again....
I swear never again to remove the back cover
PS: I checked battery level before all this and it was in 77%, now red led on power button is on...
Click to expand...
Click to collapse
That's weird, if it's not too much could you try and get a logcat (adb logcat) when its screen goes off while opening the cover. That should help us establish whether this is a HW problem(unique perhaps bad mainboard) or software problem (me,globatron,Lee, etc. experienced)
I can also confirm that it happened to me too couple of months back, but after soft reset it rebooted fine, but the backcover issue is new.
Sent from my HTC Flyer P510e using XDA Premium HD app
hello
Im orbs friend, my htc flyer still having the prob, everytime i touch the cover or pusih it by accident it goes back.
What I do is leaving it charging for awhile and press power button and vol down at the same time for around 30 sec for a couple of times and then it re start. Im guessing its not a software problem i dont find an explanation i even updated it to 2.3.4.
Hi, sorry if the question is already answered, but my English is basic and write it through google translator.
My problem is that my Xperia P (LT22i) ran out of battery and shut down, and now will not start. I connect it to the charger, the red LED lights a few minutes and then turns off. But still does not start. I left it all day and nothing.
If anyone knows how to get it back, especially to rescue the photographs he had.
I tried as I have suggested, hold power button with Volume up key till you get 3 vibration. then start your phone normally by pressing power button but does not work.
Thank you.
llumby said:
Hi, sorry if the question is already answered, but my English is basic and write it through google translator.
My problem is that my Xperia P (LT22i) ran out of battery and shut down, and now will not start. I connect it to the charger, the red LED lights a few minutes and then turns off. But still does not start. I left it all day and nothing.
If anyone knows how to get it back, especially to rescue the photographs he had.
Click to expand...
Click to collapse
When you connect the charger fo you see the charging image on the screen?
I tried as I have suggested, hold power button with Volume up key till you get 3 vibration. then start your phone normally by pressing power button but does not work.
Click to expand...
Click to collapse
Did you feel the 3 vibrations, and/or do you feel one vibration when you try to power it on?
ChikeD said:
When you connect the charger fo you see the charging image on the screen?
Did you feel the 3 vibrations, and/or do you feel one vibration when you try to power it on?
Click to expand...
Click to collapse
Hi. No, when I connect the charger the screen remains black, off. And nothing does not vibrate when I press the buttons in any combination.
Thank you.
llumby said:
Hi. No, when I connect the charger the screen remains black, off. And nothing does not vibrate when I press the buttons in any combination.
Thank you.
Click to expand...
Click to collapse
Can you connect the phone to PC in flash mode or fastboot mode, or in any mode at all?
ChikeD said:
Can you connect the phone to PC in flash mode or fastboot mode, or in any mode at all?
Click to expand...
Click to collapse
No, fastboot mode and flash mode does not work..
Yours is a hard brick. What were you doing that caused the brick?
Sent from my LT22i using xda app-developers app
AndroidNoob69 said:
Yours is a hard brick. What were you doing that caused the brick?
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
We were looking at pictures of the holiday and battery ran out. 0%.
Then I put it to charge and the red LED lit only a few minutes and then turned off. Nothing more.
llumby said:
We were looking at pictures of the holiday and battery ran out. 0%.
Then I put it to charge and the red LED lit only a few minutes and then turned off. Nothing more.
Click to expand...
Click to collapse
Have you installed any ROM mod or custom kernel, what is your firmware version, or if you don't know is it GB, ICS or JB?
ChikeD said:
Have you installed any ROM mod or custom kernel, what is your firmware version, or if you don't know is it GB, ICS or JB?
Click to expand...
Click to collapse
No, the phone is in stock firmware, the operator Vodafone Spain, 6.1.B.0.550 ICS version. Not manipulated anything in this phone.
llumby said:
No, the phone is in stock firmware, the operator Vodafone Spain, 6.1.B.0.550 ICS version. Not manipulated anything in this phone.
Click to expand...
Click to collapse
Maybe try the rubber-band trick?
I've never had to use it but might be worth a try.
ChikeD said:
Maybe try the rubber-band trick?
I've never had to use it but might be worth a try.
Click to expand...
Click to collapse
I know the rubber-band trick. Could I explain what it is? Tanks.
EDIT: I found this, to see what it's worth ...
http://forum.xda-developers.com/showthread.php?t=1849170
Hmmmm....... If all attempts fail to recover it, you can send it for service, provided you do not root/unlock bootloader.
Sent from my LT22i using xda app-developers app
i have got the saME problem and i had installed the rom (help me)
i have got the saME problem and i had installed the rom please someone help me
This morning, my Z ultra died on me. It wont start, no vibration, no use pressing vol + power buttons and the red switch. I was neither rooted or bootloader unlocked.
When I tried to connect it to my laptop (Windows 7), its shows as a USB device. The red LED flashes up, the computer finds it and then lets go of it again. Again in a few minutes, the red LED goes up , the computer makes the connection sound and then the red LED goes off again. This cycle goes on and on.
I cannot use SEUS, Flash, Fastboot or do anything. I have checked various forums and apparently I have not hard bricked the phone as the LED still works and the computer recognizes the problem. But no one has given any concrete solution.
When I connect it to the charger which came with the phone, the red LED pops up and then goes off again. I dont know if its charging. HOWEVER, I have used another Chinese Travel Charger, and then the red LED stays solid as if its charging. I dont know what it means.
Please help. I spent a lot behind this phone. I dont want to be left with a brick
It's not an issue if it's completely stock is it? You have your warranty, but i understand that i sucks to have it shipped in for repairs for god knows how long. I had a similar issue some time ago, but i'm bootloader unlocked and what not, so that was pretty easy to fix. You're completely stock though, so it's a little harder to do anything.
What happens if you hold VOL UP when you connect it to your computer? Does a blue LED light up? If yes, does it stay on, or does it disappear? What happens if you hold VOL DOWN when you connect it to your computer? Do you get a blinking LED and then nothing? That's normal, and it's going into Flashmode. If you can get it to stay in Flashmode you'll be able to re-flash a ROM in Flashtool. But be 100% sure to have enough battery, or else you'll be in danger of hard bricking it.
So..
- Plug the wall charger in and charge it for a couple of hours (2-3 hours)
- Try to kick it into Fastboot (VOL UP when you connect it to your computer). Look for blue LED.
- Try to kick it into Flashmode (VOL DOWN when you connect it yo your computer). No LED.
Hi LordManhattan. I dont have any warranty as I brought it from a local reseller .
Whether I press Vol UP or vom DOWN when I connect to the laptop, a red LED pops up, there is a connection sound and after that the red LED goes off and and there is a disconnection sound.
If I leave the phone connected with the computer, the phone gets connected after 2/3 minutes, there is a connection sound and then there is a disconnection sound again . Any clue what I can do :crying::crying:
LordManhattan said:
It's not an issue if it's completely stock is it? You have your warranty, but i understand that i sucks to have it shipped in for repairs for god knows how long. I had a similar issue some time ago, but i'm bootloader unlocked and what not, so that was pretty easy to fix. You're completely stock though, so it's a little harder to do anything.
What happens if you hold VOL UP when you connect it to your computer? Does a blue LED light up? If yes, does it stay on, or does it disappear? What happens if you hold VOL DOWN when you connect it to your computer? Do you get a blinking LED and then nothing? That's normal, and it's going into Flashmode. If you can get it to stay in Flashmode you'll be able to re-flash a ROM in Flashtool. But be 100% sure to have enough battery, or else you'll be in danger of hard bricking it.
So..
- Plug the wall charger in and charge it for a couple of hours (2-3 hours)
- Try to kick it into Fastboot (VOL UP when you connect it to your computer). Look for blue LED.
- Try to kick it into Flashmode (VOL DOWN when you connect it yo your computer). No LED.
Click to expand...
Click to collapse
LordManhattan said:
- Plug the wall charger in and charge it for a couple of hours (2-3 hours)
- Try to kick it into Fastboot (VOL UP when you connect it to your computer). Look for blue LED.
- Try to kick it into Flashmode (VOL DOWN when you connect it yo your computer). No LED.
Click to expand...
Click to collapse
just a small note or two:
Flashmode the LED should go orange, then blue then off within about 1second then it is in Flashmode
To get into either of these modes the phone has to be powered fully OFF, press the red reset button before charging to make sure, then again just before the above steps.
It sort of sounds like a corrupted loader
showdown_counts said:
Hi LordManhattan. I dont have any warranty as I brought it from a local reseller .
Whether I press Vol UP or vom DOWN when I connect to the laptop, a red LED pops up, there is a connection sound and after that the red LED goes off and and there is a disconnection sound.
If I leave the phone connected with the computer, the phone gets connected after 2/3 minutes, there is a connection sound and then there is a disconnection sound again . Any clue what I can do :crying::crying:
Click to expand...
Click to collapse
Hmmm... This is a tough one..
Sent from my C6806_GPe using Tapatalk
Please someone help me. Really need to do something here
LordManhattan said:
Hmmm... This is a tough one..
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
Have a good read of this? http://forum.xda-developers.com/showthread.php?t=1849170
It would suggest that the battery is flat. Let it charge in the wall plug for a few hours and see what happens
I have let the phone to charge overnight with the charger that came with the phone. As I said before, with that charger, the red LED would turn on and then go off again. I will hopefully try the Chinese travel charger tonight with which the red LED remains solid.
The funny thing is , the phone had about 80% charge when it died. This is so weird :'(
What You Do Before It Happen?
Sent from my C6833 using Tapatalk
Nothing. Its like as if the phone soft bricked itself, probably by auto updating or something
showdown_counts said:
Nothing. Its like as if the phone soft bricked itself, probably by auto updating or something
Click to expand...
Click to collapse
Have you tried the reset button under the microsd flap? Press and hold for 3 secs.
I did read another user had an issue where the screen blanked for around a day, he left it plugged in and came back to it about 6 hours later and it was fine again.
Sent from my C6833 using XDA Premium 4 mobile app
I tried that and basically all the other normal options. No use. The computer recognises it as a USB Input Device and for a second or two, the red LED comes up. Same thing when I am charging
SpyderTracks said:
Have you tried the reset button under the microsd flap? Press and hold for 3 secs.
I did read another user had an issue where the screen blanked for around a day, he left it plugged in and came back to it about 6 hours later and it was fine again.
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
showdown_counts said:
I tried that and basically all the other normal options. No use. The computer recognises it as a USB Input Device and for a second or two, the red LED comes up. Same thing when I am charging
Click to expand...
Click to collapse
It's a battery issue most probably. I guess it doesn't show anything. Is your battery removable?
I still have not opened my phone. I am looking at all the other options first. If everything else fails, I guess I will have to open my phone
showdown_counts said:
I still have not opened my phone. I am looking at all the other options first. If everything else fails, I guess I will have to open my phone
Click to expand...
Click to collapse
I know it isn't the best choice but I would suggest getting it to sony repair. So that your waranty isn't voided (even if you have bought from a local store you still have waranty
Andrewasth said:
I know it isn't the best choice but I would suggest getting it to sony repair. So that your waranty isn't voided (even if you have bought from a local store you still have waranty
Click to expand...
Click to collapse
Warranty exists with Sony for first year, no matter where it's bought, very true.
Sent from my C6833 using XDA Premium 4 mobile app
+1 contact your local sony, i had a similar problem, no fastboot/flashmode. locked bl/not rooted and my led only flashed red and occasionally solid red then nothing. plugging it into computer continuously played the disconnecting sound.
most likely hardbricked.
i also purchased my xzu from a local BST but as long as you have your imei, contact sony and theyll tell you if you have warranty. they required me to send in proof of purchase as well but like most say "play stupid" ( i said i received it as a gift and they said it was fine)
i got a brand new XZU after a week and a half sending it in.
LordManhattan said:
- Plug the wall charger in and charge it for a couple of hours (2-3 hours)
- Try to kick it into Fastboot (VOL UP when you connect it to your computer). Look for blue LED.
- Try to kick it into Flashmode (VOL DOWN when you connect it yo your computer). No LED.
Click to expand...
Click to collapse
Thank you! One or two years ago my Z Ultra's screen cracked and I got a new phone. Decided to use it again, purchased a new screen and replaced it myself today. When I tried to move to AOSP (had root, bootloader unlocked, backup of TA partition), the phone bricked. No SONY logo, nothing. Did what you said above, Xperia Companion recognized the phone in flashmode and is now downloading the newest stock rom. I was so afraid of a hard brick, that living with latest stock without root doesn't seen so bad now hahaha
Hey Friends, I have exactly the same issue. The red led just flashes up for a couple of seconds and this cycle continues. My battery was a bit swollen up and the back glass cover opened up a bit. Still battery was working fine. Two days ago I tried nougat aosp on it and after leaving it idle for 2 hours, it was bricked. I can enter into flashmode and flashed stock LP as well as KK but it does not boots up. Is it definitely battery's problem? If yes, where can I buy original or near original battery for it?
lifehacker69 said:
Hey Friends, I have exactly the same issue. The red led just flashes up for a couple of seconds and this cycle continues. My battery was a bit swollen up and the back glass cover opened up a bit. Still battery was working fine. Two days ago I tried nougat aosp on it and after leaving it idle for 2 hours, it was bricked. I can enter into flashmode and flashed stock LP as well as KK but it does not boots up. Is it definitely battery's problem? If yes, where can I buy original or near original battery for it?
Click to expand...
Click to collapse
The battery is dangerous and should be removed. Be careful because the battery can burst into flames if the bloated cell get punctured.
Use tools with caution and take your time.
Lipo cells expands as a first safety trigger. Instead of going strait to venting or venting and burst into flames.
Its a safety feature if they are charged with too high current or if the cell is drained below its 2,22 volts and is brought back to life with a normal charger that puts normal current on the cell. Then even 400mA in this scenario is way too much current to start charging a drained cell with.
But the battery should not be the issue that your phone is not booting. How did you flash stock rom? With Flashtool?
My Xperia z ultra cannot turn on, turn off, not charge.
When charging the led is on off on off.
Dont know what a problem i try to turn off all way but cannot.
Anyone here can help please?
Kenjijo said:
My Xperia z ultra cannot turn on, turn off, not charge.
When charging the led is on off on off.
Dont know what a problem i try to turn off all way but cannot.
Anyone here can help please?
Click to expand...
Click to collapse
Sounds like it could be a corrupt bootloader?
Things to try
Press the red 'off' button beside the sim card, then charge in a A/C charger for several hours, then see if it will power on
Do the above but dont power on. hold down the volume down button while connection to a PC
Do the above but press the 'red off button' while holding the vol - button while connected to the PC
These last two we want the LED to turn blue for 1/2 a sec then go out (Flash Mode)
blueether said:
Sounds like it could be a corrupt bootloader?
Things to try
Press the red 'off' button beside the sim card, then charge in a A/C charger for several hours, then see if it will power on
Do the above but dont power on. hold down the volume down button while connection to a PC
Do the above but press the 'red off button' while holding the vol - button while connected to the PC
These last two we want the LED to turn blue for 1/2 a sec then go out (Flash Mode)
Click to expand...
Click to collapse
Thanks for your comment.
I'll try it.
Still nothing happen.
Now when i charging the led is blinking.
Don't know what is the problem.
Kenjijo said:
Still nothing happen.
Now when i charging the led is blinking.
Don't know what is the problem.
Click to expand...
Click to collapse
Maybe try to repair your phone via SEUS.
maxld said:
Maybe try to repair your phone via SEUS.
Click to expand...
Click to collapse
USB cannot recognized.
So what i gonna do?
The only times I've seen a blinking red LED (with and without a cable plugged in), is when there are issues with the bootloader. I've accidentally locked my bootloader while being on a custom kernel a couple of times, and I've gotten this exact behavior.
What was the last thing you did with your Ultra?
Sent from my C6833_GPe using Tapatalk
LordManhattan said:
The only times I've seen a blinking red LED (with and without a cable plugged in), is when there are issues with the bootloader. I've accidentally locked my bootloader while being on a custom kernel a couple of times, and I've gotten this exact behavior.
What was the last thing you did with your Ultra?
Sent from my C6833_GPe using Tapatalk
Click to expand...
Click to collapse
I didn't do anything. My phone no root and locked bootloader. And now the led is continuous (red led, yellow blinking) when i'm charging. cannot do anything with it.
Sorry my English not good.
I would go to a service center, if i were you.
Yeah, I would probably send it in for repairs too since I can't really tell what's going on.
Yeah i already send it to service center
I reflashed to stock rom. After that (succesful boot), it suggest to update to a newer Firmware. I agreed. Then it doesn't awake anymore.
Even long press to power there is no sign of life.
If I plug the power, the white LED goes on for a certain time. I guess it is until it is fully charged.
After this it starts blinking: long, short, long, short .. a few times, than it stops
After pressing the keys, blinking starts again - with no stop until unplugging USB.
Is there any hope to recover it. This time I have not much hope ....
In my moto E, when I connect to charger, the white light blinks for 1 sec, then goes off. No long press, anything is working
starbright_ said:
I reflashed to stock rom. After that (succesful boot), it suggest to update to a newer Firmware. I agreed. Then it doesn't awake anymore.
Even long press to power there is no sign of life.
If I plug the power, the white LED goes on for a certain time. I guess it is until it is fully charged.
After this it starts blinking: long, short, long, short .. a few times, than it stops
After pressing the keys, blinking starts again - with no stop until unplugging USB.
Is there any hope to recover it. This time I have not much hope ....
Click to expand...
Click to collapse
1. Press and hold power button and connect the charger
If white screen appears then go for next step
2. Unplug the charger once and again connect your charger without pressing any button
3. Let your mobile get charged
4. Then flash stock/custom ROM (search in XDA thread)
NOTE : Don't use stock charger(default charger comes with your mobile kit)
USE DIFFERENT CHARGER
Hope it helps you:good:
Rajendran Rasa said:
1. Press and hold power button and connect the charger
If white screen appears then go for next step
2. Unplug the charger once and again connect your charger without pressing any button
3. Let your mobile get charged
4. Then flash stock/custom ROM (search in XDA thread)
NOTE : Don't use stock charger(default charger comes with your mobile kit)
USE DIFFERENT CHARGER
Hope it helps you:good:
Click to expand...
Click to collapse
Used a Samsung Charger, pressed power and plugged in. Nothing happened first. After a while (i guess I released the button) the white LED starts blinking again. And it still blinks.
I haven't seen anything on screen since this update happened ...
Seems to be really screwed.
starbright_ said:
Used a Samsung Charger, pressed power and plugged in. Nothing happened first. After a while (i guess I released the button) the white LED starts blinking again. And it still blinks.
I haven't seen anything on screen since this update happened ...
Seems to be really screwed.
Click to expand...
Click to collapse
Can you go to fastboot mode??
Rajendran Rasa said:
Can you go to fastboot mode??
Click to expand...
Click to collapse
No, Power + Volume down (also tried Volume up) - nothing helped.
The only sign of life is the white LED that seems to indicate charging (if it is on/not blinking).
The second is this strange blinking, I can start with Power + Volume down (but only if USB cable is plugged).
But a "adb usb" reports "no device/emulators found"
starbright_ said:
No, Power + Volume down (also tried Volume up) - nothing helped.
Click to expand...
Click to collapse
Then try this
Connect charger and hold power + volume down
The whit led flashing happens when the battery is deep discharged....Put it on charge for at least 20 minutes ...Then try turning it on ,or going into fastboot mode by disconnecting the charger first
Akshay_92 said:
The whit led flashing happens when the battery is deep discharged....Put it on charge for at least 20 minutes ...Then try turning it on ,or going into fastboot mode by disconnecting the charger first
Click to expand...
Click to collapse
From my experience the White LED goes on (not flashing) if it charges.
It goes off after fully charged. I keep it on charger for many hours.
The LED flashing only happens If I try to go into fastboot while USB is plugged.
starbright_ said:
From my experience the White LED goes on (not flashing) if it charges.
It goes off after fully charged. I keep it on charger for many hours.
The LED flashing only happens If I try to go into fastboot while USB is plugged.
Click to expand...
Click to collapse
You should try to go into fastboot when the phone is fully charged ,rather than when it is being charged ,I have seen it that behaves weirdly when trying to enter into fastboot with the charger being plugged in .
Sent from my Moto G (4) using Tapatalk
Mh, from what I see - if there is no USB plugged, it happens nothing at all. I can preess Power or Power+Volume up/down as long as I like ...
starbright_ said:
Mh, from what I see - if there is no USB plugged, it happens nothing at all. I can preess Power or Power+Volume up/down as long as I like ...
Click to expand...
Click to collapse
A question, which stock ROM version did u flash 4.4.4 or 4.4.2 ?
I was on Lineage, flashed back to stock. Probably to 4.4.2. Than it wants to update to newer stock release, guess 4.4.4 but not sure. Do you think this matters?
starbright_ said:
I was on Lineage, flashed back to stock. Probably to 4.4.2. Than it wants to update to newer stock release, guess 4.4.4 but not sure. Do you think this matters?
Click to expand...
Click to collapse
Yes it matters.
https://forum.xda-developers.com/moto-e/general/warning-downgrading-information-moto-e-t3062859
_sushan_ said:
Yes it matters.
https://forum.xda-developers.com/moto-e/general/warning-downgrading-information-moto-e-t3062859
Click to expand...
Click to collapse
There is nothing mentioned about a solution. I do have a brick :crying:
starbright_ said:
There is nothing mentioned about a solution. I do have a brick :crying:
Click to expand...
Click to collapse
See other threads, u did a mistake by flashing 4.4.2 . You should have flashed 4.4.4 instead. Accepting the OTA, you have hard-bricked your device. It can't be restored as of now. Buy a new device
starbright_ said:
I was on Lineage, flashed back to stock. Probably to 4.4.2. Than it wants to update to newer stock release, guess 4.4.4 but not sure. Do you think this matters?
Click to expand...
Click to collapse
Do you have the v4.4.2 ROM as I just want to check if otg is working or not. As only words are flying around I just need to confirm it.
Ankit_29 said:
Do you have the v4.4.2 ROM as I just want to check if otg is working or not. As only words are flying around I just need to confirm it.
Click to expand...
Click to collapse
As mine one is a brick I deleted all the tested roms and stuff. Sorry.
But as far as I remember OTG doesn't work on Moto E.
starbright_ said:
As mine one is a brick I deleted all the tested roms and stuff. Sorry.
But as far as I remember OTG doesn't work on Moto E.
Click to expand...
Click to collapse
Will verify, no OTG support on stock.
xt830c variant but i doubt that will make any difference lol.
Your device is hard bricked now same as mine. I did the same thing 1 year ago.
I haven't found any solutions yet.
https://forum.xda-developers.com/moto-e/help/solution-hard-bricked-moto-e-t3586395
Let's wait if these guys find some solution.
Btw if anyone have a working Moto E please update the image file on drive and share the link over there.
That will a great help.
Thanks!!