Good morning,i have galaxy ace s5830i.The phone not entering in download mode and recovery mode.I hold the power button and phone freeze on boot "samsung galaxy ace s5830i".I have jig when connect jig with phone i see black screen with "samsung galaxy ace s5830i"
sorry for bad english
erevanioths89 said:
Good morning,i have galaxy ace s5830i.The phone not entering in download mode and recovery mode.I hold the power button and phone freeze on boot "samsung galaxy ace s5830i".I have jig when connect jig with phone i see black screen with "samsung galaxy ace s5830i"
sorry for bad english
Click to expand...
Click to collapse
Flash Stock ROM via ODIN
sorry for bad english[/QUOTE]
no entering download mode & recovery..
erevanioths89 said:
sorry for bad english
no entering download mode & recovery..
Click to expand...
Click to collapse
Right Combinations for Recovery - Vol up + Power + Home
And for Download Mode - Vol up + Vol down + Power
Are you following these ?
Hitesh2626 said:
Right Combinations for Recovery - Vol up + Power + Home
And for Download Mode - Vol up + Vol down + Power
Are you following these ?
Click to expand...
Click to collapse
Yes i following these.I see black screen with this "samsung galaxy ace s5830i"
erevanioths89 said:
Yes i following these.I see black screen with this "samsung galaxy ace s5830i"
Click to expand...
Click to collapse
Its Difficult to find out now if both are not working try out with USB JIG
Hitesh2626 said:
Its Difficult to find out now if both are not working try out with USB JIG
Click to expand...
Click to collapse
Not working with usb jig..
erevanioths89 said:
Not working with usb jig..
Click to expand...
Click to collapse
Last Option give it to Service Center .
erevanioths89 said:
Good morning,i have galaxy ace s5830i.The phone not entering in download mode and recovery mode.I hold the power button and phone freeze on boot "samsung galaxy ace s5830i".I have jig when connect jig with phone i see black screen with "samsung galaxy ace s5830i"
sorry for bad english
Click to expand...
Click to collapse
first take off the battery, then hold power button+home+volumen up for 6 seconds, after 6 seconds make half second pause and again press volumen up+home+power and hold for 6 seconds
try this
Angryace said:
first take off the battery, then hold power button+home+volumen up for 6 seconds, after 6 seconds make half second pause and again press volumen up+home+power and hold for 6 seconds
try this
Click to expand...
Click to collapse
Nothing my friend..
erevanioths89 said:
Good morning,i have galaxy ace s5830i.The phone not entering in download mode and recovery mode.I hold the power button and phone freeze on boot "samsung galaxy ace s5830i".I have jig when connect jig with phone i see black screen with "samsung galaxy ace s5830i"
sorry for bad english
Click to expand...
Click to collapse
If you bricked your device obviously you cant go into Recovery mode ..
I think you used wrong combi for going into download mode
Again check by Going into Download mode (Volume up+volume down+power button).
Now flash stock rom via ODIN .. Anyway dont panic buddy
Mr.Gentleman said:
If you bricked your device obviously you cant go into Recovery mode ..
I think you used wrong combi for going into download mode
Again check by Going into Download mode (Volume up+volume down+power button).
Now flash stock rom via ODIN .. Anyway dont panic buddy
Click to expand...
Click to collapse
Hello my friend,
nothing with this combination.I see only black screen who say "samsung galaxy ace s5830i"
open odin
remove battery. press the volume+ and volume- keys.
connect usb to pc while holding the keys
if necessary then press the power key
you will get a blank screen
now press the volume+ key
odin will recognise your device
if you want the download mode screen back then use the bootloader file while installing via odin
and try odin flashing again
Hey!
The black screen you see is the download mode! Again press the volume up and connect it to the system with ODIN running! It will recognise your device! Then flash the stock rom! Hope it will be helpful!
Hit thanks if helped!
achuakshay said:
The black screen you see is the download mode!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mr.Gentleman said:
View attachment 2483287
Click to expand...
Click to collapse
What happened dude?
achuakshay said:
What happened dude?
Click to expand...
Click to collapse
Download mode is black screen ??
[sarcasm]Sorry my mistake,you must be senior.ERD !! ... -_- [/sarcasm]
[non-sarcastic]Buddy, download mode ain't Black screen ..[/non-sarcastic]
It happens bro!
Bro, I got it once! But when i connected to the system it recognized and i flashed the stock rom successfully..
BTW thanks for calling me "buddy".. Cuz u were happy that @mathm2013 trolled me!
Mr.Gentleman said:
Download mode is black screen ??
[sarcasm]Sorry my mistake,you must be senior.ERD !! ... -_- [/sarcasm]
[non-sarcastic]Buddy, download mode ain't Black screen ..[/non-sarcastic]
Click to expand...
Click to collapse
the black screen is download mode itself. it is just that you cant see it. if you flash bootloader file via odin then once again you can see it
achuakshay said:
Bro, I got it once! But when i connected to the system it recognized and i flashed the stock rom successfully..
BTW thanks for calling me "buddy".. Cuz u were happy that @mathm2013 trolled me!
Click to expand...
Click to collapse
Read this post.
Related
I've try many times but can't get it to boot to recovery or download mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am getting the exact same screen...cant get it to recovery or download mode.
its not bricked, I had this many times while pulling the usb or battery while in odin. Plug in the usb and press and hold vol up and down and power. When the screen goes black let go of power while continuing to hold vol up and down. Should bring you back to download mode
I was able to get it into download mode and flash the rom. Thanks
Sent from my SGH-T959 using XDA App
jerseyboy said:
I was able to get it into download mode and flash the rom. Thanks
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
How'd you get it to flash? I got that same screen but in ODIN it just sits at cache.rfs... nothing good happening after that. It is basically frozen.
Regards,
B
OMG I finally got it. I had to leave ODIN open after it stuck at file analysis. I then took out the battery of the phone and put it back into download mode. I click start in ODIN and thankfully... she's flashing back to stock 2.1. I had tried a million different ways... ODIN is not exceptionally stable. No bueno. I think I'm going to keep the stock Kernal cause this was scary... lol.
Regards,
B
I used odin too. Good to know your's working now
Sent from my SGH-T959 using XDA App
tengtengvn said:
I've try many times but can't get it to boot to recovery or download mode.
Click to expand...
Click to collapse
I had the same problem.
What you have to do is run Odin with the usb connected to the phone, then you unplug and plug the usb back in, hold the vol - and + with the power button at the same time, once the screen goes black, release the power button, but keep holding the vol - and + buttons and Odin will recognize your phone. then the phone will be at the downloading screen
That's how it worked for me.
What did you do to get your phone in this state? Try to root ??
vibrantFTW said:
OMG I finally got it. I had to leave ODIN open after it stuck at file analysis. I then took out the battery of the phone and put it back into download mode. I click start in ODIN and thankfully... she's flashing back to stock 2.1. I had tried a million different ways... ODIN is not exceptionally stable. No bueno. I think I'm going to keep the stock Kernal cause this was scary... lol.
Regards,
B
Click to expand...
Click to collapse
Yup. The key part is to leave ODIN open.
Please help! I have the same issue. I have been trying for hours with no luck.
I cannot seem to get into download mode. I have tried everything you guys suggested.
Mr_creeper_98 said:
I had the same problem.
What you have to do is run Odin with the usb connected to the phone, then you unplug and plug the usb back in, hold the vol - and + with the power button at the same time, once the screen goes black, release the power button, but keep holding the vol - and + buttons and Odin will recognize your phone. then the phone will be at the downloading screen
That's how it worked for me.
Click to expand...
Click to collapse
thank you so much for this. you saved me!
dsint said:
Please help! I have the same issue. I have been trying for hours with no luck.
I cannot seem to get into download mode. I have tried everything you guys suggested.
Click to expand...
Click to collapse
Only suggestion I can give is to keep trying, that's how I got my phone out of that dreaded state in the OP's pic.
Man I'm in the same boat. I tried the key combination many times before this. I was flashed bionix 1.2 w/OC and was using ROM Manager to revert back to my previous ROM which was stock and when it was done it rebooted and would stay stuck with the Samsung Vibrant screen. I ended upsing ADB to get it into download mode and the other modes but I tried to use ODIN to restore after it was in download mode and it just seemed stuck. How long does it take to usually load the kernel? Well it was taking so long so I just pulled the USB plug. After I did this I got that cellphone and computer icon. I've tried many times to get it into download mode or restore mode many times with the volume button and power button and haven't had any luck at all. I'll keep trying. I hope this really works.
I have tried every combo mentioned and a few others along with every button combination, I read it has to do with what rom you were using before the phone -> computer icon. I came from bionix 1.3, I would love any help to get this thing fixed before my wife finds out...
This happened to me earlier today instead pull the battery out and usb then put the battery back in open odin attatch the usb to the computer and then hold down volume up and volume down while plugging the usb to the phone finally and it worked might take a few tries and if odin doesn't recognize the phone unplug the usb and plug it back in if it's already in dl mode
if ur device is hardware locked, ur as well as bricked at this point, i cant get mine out
An easier way to get to download mode that I have been using. Have Odin open. Turn off the phone. Hold volume up and plug in the USB. Goes straight into download mode for me every time. Not sure if this will work with the hardware locked phones (I don't have a hardware locked phone - got it on launch day).
vibrantFTW said:
ODIN is not exceptionally stable.
Click to expand...
Click to collapse
Old thread, I know. Just my 2 cents. I only found this to be true of Odin v1.0 since v1.3 seems quite stable.
If your using odin and it hangs during flashing never pull the usb always pull the battery out first then the cable the phone will stay on when you pull the batterycuz the usb is giving it power but once the usb is pulled the phone is off and you won't be stuck with the dreaded phone ! Computer screen.
Sent from my SGH-T959 using XDA App
Hallo guys, i have some problem, its so serious.
when i try to flash GB Bootloader, and not succes !
and...
my vibrant stuck in bootloader, it saying "Vibrant" when i try to re-flash my vibrant, but the screen has change to "like phone not connect to pc" here is the picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and my phone doesnt want connect to PC, anyone help me?
please, or any way to manual factory reset? thx, sorry for my bad english
Akbaruz said:
Hallo guys, i have some problem, its so serious.
my vibrant stock in bootloader, it saying "Vibrant" when i try to re-flash my vibrant, but the screen has change to "like phone not connect to pc" here is the picture
and my phone doesnt want connect to PC, anyone help me?
please, or any way to manual factory reset? thx, sorry for my bad english
Click to expand...
Click to collapse
Open odin in pc.remove the battery and re insert it.press volume up,down and power button together.the icon(icon indicating pc and phone) will disappear in a while.now unpress the power button while holding volume up and down together.phone should get in to download mode ..now you can odin back to jfd.
If the phone does not get into download mode by this method remove your batter.connect the phone to the pc.while holding the volume up and down buttons together re insert the battery.then the phone should go into the download mode.then you can coding back to jfd.good luck.
Sent from my SGH-T959 using XDA App
nuwanmw1988 said:
Open odin in pc.remove the battery and re insert it.press volume up,down and power button together.the icon(icon indicating pc and phone) will disappear in a while.now unpress the power button while holding volume up and down together.phone should get in to download mode ..now you can odin back to jfd.
If the phone does not get into download mode by this method remove your batter.connect the phone to the pc.while holding the volume up and down buttons together re insert the battery.then the phone should go into the download mode.then you can coding back to jfd.good luck.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I asume that you are on froyo bootloaders.
Sent from my SGH-T959 using XDA App
nuwanmw1988 said:
Open odin in pc.remove the battery and re insert it.press volume up,down and power button together.the icon(icon indicating pc and phone) will disappear in a while.now unpress the power button while holding volume up and down together.phone should get in to download mode ..now you can odin back to jfd.
If the phone does not get into download mode by this method remove your batter.connect the phone to the pc.while holding the volume up and down buttons together re insert the battery.then the phone should go into the download mode.then you can coding back to jfd.good luck.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
still wont connect oops soryy, i was flash my phone with GB bootloader (before stuck on the bootloader), but unsucces, so its still in froyo bootloader (maybe), uh...
Akbaruz said:
still wont connect oops soryy, i was flash my phone with GB bootloader (before stuck on the bootloader), but unsucces, so its still in froyo bootloader (maybe), uh...
Click to expand...
Click to collapse
Try re inserting the battery when connected to the pc while holding volume up and power.
Sent from my SGH-T959 using XDA App
nuwanmw1988 said:
Try re inserting the battery when connected to the pc while holding volume up and power.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It might work if you are in gb boot loaders.by the way I have also had the same problem three four times.but all the times I could odin back to stock jfd by using above methods.
Sent from my SGH-T959 using XDA App
FYI - This happened to me and you can get it into download mode but it might not show the actual download screen. As soon as you plug it in you'll get the confirmation from ODIN that it is connected.
Akbaruz said:
still wont connect oops soryy, i was flash my phone with GB bootloader (before stuck on the bootloader), but unsucces, so its still in froyo bootloader (maybe), uh...
Click to expand...
Click to collapse
But this happened to me when I was flashing ROMs.not when im flashing bootloaders.
Sent from my SGH-T959 using XDA App
This happened to me so i bought a download jig on ebay for like 7 bucks and that fixed it.
Sent from my SGH-T959 using XDA App
i have this phone with non working home button
i am new here in this forum...and its my first time to have galaxy s2 before i have iphone...so..
i need help...i want to restore my phone to stock firmware?any tutorial?
i want to delete everything and i install at the beggning...
and home button is not working!
DMXSTORM said:
i have this phone with non working home button
i am new here in this forum...and its my first time to have galaxy s2 before i have iphone...so..
i need help...i want to restore my phone to stock firmware?any tutorial?
Click to expand...
Click to collapse
all the things that you would want to know is in this sticky:
http://forum.xda-developers.com/showthread.php?t=1648351
DMXSTORM said:
i want to delete everything and i install at the beggning...
Click to expand...
Click to collapse
after you read and understand how to flash firmware using odin, and fully aware of what could go wrong, from the guides in the sticky topic i posted above
you will find unbranded stock firmwares in here:
http://forum.xda-developers.com/showthread.php?t=1544487
DMXSTORM said:
and home button is not working!
Click to expand...
Click to collapse
well, i would suggest ebay for a replacement if you are confident enough replacing it yourself, or send it for repair at a local repair shop
thanks for your answer.
my problem is my HOME button not working.
i can install firmware without home?
DMXSTORM said:
thanks for your answer.
my problem is my HOME button not working.
i can install firmware without home?
Click to expand...
Click to collapse
yes, if you have CWM installed:
open cwm manager > under reboot choose Download mode > use odin to flash official firmware
If you are rooted you can use button savior on the play store https://play.google.com/store/apps/details?id=com.smart.swkey
It will give you a virtual home button
Sent from my Galaxy Nexus using xda premium
i am not ROYTED.
were can i find CWM ?adroid market?
DMXSTORM said:
i am not ROYTED.
were can i find CWM ?adroid market?
Click to expand...
Click to collapse
You don't need ROOT for Button Savior if you need only the home button, power off ...[other options may need the root]
DMXSTORM said:
i am not ROYTED.
were can i find CWM ?adroid market?
Click to expand...
Click to collapse
DMXSTORM said:
i want to restore my phone to stock firmware?
Click to expand...
Click to collapse
i was under the impression that you are not on stock?
if the home button is not working physically, i would either replace it or take collingall's advice
if you still want to flash official firmware, the third option will be a "usb jig"
---------------------------------------------------------
edit:
supermult said:
Hi,
I also have a phone with a dead home button and i learned my way to handle it.
Try plugging in usb and holding volume down at the same time.
I don´t know why but this always got me into download mode.
Click to expand...
Click to collapse
i have version 4.0.4 original but i want to install fresh because lot of programs install and my device is very slow now.
sorry but i am NEW here who is collingall's??
YES i want to install official firmware(but without HOME BUTTON)???!!??
How to use usb jig??you need ROOT?
JUST now i try to restart my phone and i press volume down and something happent...
''Warning!!
its say something to restore to custom firmaware!
can i install the official firmware like this?or ''maybe LATER 'i must USE home?
Buy a USB jig. Its a dongle which, when plugged into the phone, forces your phone into download mode. From there you can flash any official firmware (via Odin) for your model. You don't need root permissions for it.
Sent from my GT-I9100 using Tapatalk 2
i try supermult method for download mode and works!!
i connect my device with mini usb to pc and i press volume down and restart phone and....DOWNLOAD MODE SAYS...
Warning !!
A custom OS can cause critical
problems on phone and instaled
applications.
if you want to download a custom
OS,press the volume up key.
Otherwise,press the volume down
key to cancel.
Volume up : Continue
Volume down : Cancel (restart phone)
its this the DOWNLOAD MODE??TELL ME PLEASE...??!??
can i use odin now?
Press Volume Up and you will be in Download Mode.
Yes, press volume up and you'll be in the download mode. Connect your phone to your PC, start Odin and flash away.
Sent from my GT-I9100 using Tapatalk 2
i need the official firmware s2(greece)and odin for download....
send me the link where to download....!!
DMXSTORM said:
i need the official firmware s2(greece)and odin for download....
send me the link where to download....!!
Click to expand...
Click to collapse
GT-I9100 - Greece 4.0.3 2012-04-10
GT-I9100 - Greece (Vodafone) 4.0.3 2012-06-11
GT-I9100 - Greece (Cosmote) 4.0.4 2012-08-31
Odin3-v1.85.zip
THANKS ALL FOR YOUR HELP
i use idin and official firmware but the phone not delete nothing!!why?i have all the programs again and the pictures...
i need fresh firmware install...not from buckup....
guides for odin
DMXSTORM said:
THANKS ALL FOR YOUR HELP
i use idin and official firmware but the phone not delete nothing!!why?i have all the programs again and the pictures...
i need fresh firmware install...not from buckup....
Click to expand...
Click to collapse
willk22 said:
OdinOdin is a piece of software that allows us to flash anything we want to the phone. The file is attached to the bottom of this post.
It is perfectly safe IF USED CORRECTLY!
This is a general guide for using Odin, take a look at this picture (thanks to screamworks):
To get Odin to connect to your phone, you need to boot into 'download mode' by pressing volume down, home, and power keys at the same time, and connect your phone to your PC via USB.
Everything in red:
NEVER TOUCH
NEVER TOUCH
NEVER TOUCH
NEVER TOUCH
Click to expand...
Click to collapse
Intratech said:
1. Just download the firmware version you want
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1
If the package has more than one .tar archive then they will be labelled with PDA, Phone/Modem and CSC. Just put them in the corresponding section of Odin
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Anyone ask about .pit file is a moron
Should look like this screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the package has 3 files it should look like this:
Regardless of firmware version it's still the same methodology
6. Connect the USB cable and wait for the ID:COM section to turn yellow
7. Click start to flash
8. Do not disconnect the cable or turn off the device, it will reboot when it finishes.
It will not wipe your phone if you flash as recommended
Click to expand...
Click to collapse
help i try this and mobtle says=
firmwar upgrade encountered
an issue.Please select
recovery mode in kies k try again.
DMXSTORM said:
help i try this and mobtle says=
firmwar upgrade encountered
an issue.Please select
recovery mode in kies k try again.
Click to expand...
Click to collapse
do you have Kies installed?
please provide all the steps you took with all the details
i fix it no problem.
i dont now how to make a fresh restore??!!??
i want to install fresh firmware with no programs i have allready install....
and no my settings and my personalization...
can i delete everything?just a new s2?
hi XDA .. i m from india. basically i am new to android. i wanted to update my firmware to jellybean 4.1.2 .. when i googled it it asked for root..actually i have Galaxy S2 I9100 not rooted (stock) .. i got a blog when i searched for how to root.. den i found this blog "technoxide.com/2012/11/root-galaxy-s2-jelly-bean-4.1.2-xxlsj" . i downloaded dat file and copied to external SD card and followed instructions.. after applying that update from external SD card .. i rebooted. from that time my phone is not switching on.. it just shows "" Samsung logo " .. its not even entering into recovery mode.. please help.. please please
mapps563 said:
hi XDA .. i m from india. basically i am new to android. i wanted to update my firmware to jellybean 4.1.2 .. when i googled it it asked for root..actually i have Galaxy S2 I9100 not rooted (stock) .. i got a blog when i searched for how to root.. den i found this blog "technoxide.com/2012/11/root-galaxy-s2-jelly-bean-4.1.2-xxlsj" . i downloaded dat file and copied to external SD card and followed instructions.. after applying that update from external SD card .. i rebooted. from that time my phone is not switching on.. it just shows "" Samsung logo " .. its not even entering into recovery mode.. please help.. please please
Click to expand...
Click to collapse
That blog has posted the wrong kernel. We already seen another victim http://forum.xda-developers.com/showthread.php?t=2069398
to solve this do either of these
Download Philz Kernel for XXLSJ from here http://www.mediafire.com/?2d893461cjg2rbe. and follow these instructions
Boot into download mode. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key
start odin3 (download Link ) and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://forum.xda-developers.com/showpost.php?p=31310884&postcount=3
Or
Use Siyah Kernel
Download Siyah Kernel from here http://d-h.st/hcS . and follow these instructions
Boot into download mode. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key
start odin3 (download Link ) and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
Deleted
i downloaded files and configured.. but wen i press volume key down + home + power its showing " Warning ! A custom OS can cause critical problems in phone and installed applications . if you want to download a custom OS,press the volume up key, otherwise, press the volume down key to cancel "
please wot shld i do now.. more over after connecting to Pc.. that ODIN Yellow coloured it shld come ..but its nt showin here:crying:
mapps563 said:
i downloaded files and configured.. but wen i press volume key down + home + power its showing " Warning ! A custom OS can cause critical problems in phone and installed applications . if you want to download a custom OS,press the volume up key, otherwise, press the volume down key to cancel "
Click to expand...
Click to collapse
Yes you have to press up key. It will take you to download mode.
Also you will need Samsung drivers. You can either get them as a standalone drivers package
or
just install kies run it once and kill all kies processes from tasks manager before running ODIN
Sent from my GT-I9100 using Tapatalk 2
seriously i missed a step.. i pressed a volume up key and i pressed start button odiin.. it came ok.. den now i am restarting its the same but now its with a triangle mark..symbol shown.. please .. please complete step by step..wot n all i shld do.. please write it in a single reply.. please DRRAPTOR..please..
am not understanding download mode from where it wil download .. do i have to wait 4 some time ?? please dude.. please
please i don want anything.. i just want my phone to turn on.. please guide me.. pleas please
Now do this,
1. Shutdown your device.
2. Reboot in recovery by pressing "power" + "home" + "volume down". And wait until it is in recovery.
3. Wipe data/factory reset. Also wipe cache.
4. Reboot
5.success
Sent from my GT-I9100 using Tapatalk 2
i shutdown my device.. now i pressed volume down +home+power.. again its saying dat previous message.. "Warning ! A custom OS can cause critical problems in phone and installed applications . if you want to download a custom OS,press the volume up key, otherwise, press the volume down key to cancel ".. now wot shld i do.. how long should i wait to get downloaded
mapps563 said:
i shutdown my device.. now i pressed volume down +home+power.. again its saying dat previous message.. "Warning ! A custom OS can cause critical problems in phone and installed applications . if you want to download a custom OS,press the volume up key, otherwise, press the volume down key to cancel ".. now wot shld i do.. how long should i wait to get downloaded
Click to expand...
Click to collapse
Now pres vol up button and you are in download mode.
please help
how long shld i wait to get download finish.. pleas pleas help.. from where it ll download.. do i need to connect anything. pleas pleas..
mapps563 said:
how long shld i wait to get download finish.. pleas pleas help.. from where it ll download.. do i need to connect anything. pleas pleas..
Click to expand...
Click to collapse
When it is in download mode, connect it to your pc and setup ODIN as mentioned earlier. And flash philz method
Sent from my GT-I9100 using Tapatalk 2
i did as u said .. but again its same.. showing logo with triangle.. den not switching on.. should i go to recovery mode and clear that as u said.. please do reply
mapps563 said:
i did as u said .. but again its same.. showing logo with triangle.. den not switching on.. should i go to recovery mode and clear that as u said.. please do reply
Click to expand...
Click to collapse
Yes you should do the following
Reboot into recovery.
You will see something like this
Select "Wipe Data/Factory reset" wait for it finish
Select " Cache Partition" and wait for it to finish
Select reboot system.
Success
hey please bro.. m all crying here.. pleas pleas help me.. please.. i ll begu.. tell me wot i should do next.. please .. XDA. help me.. please.. wot shld i do now.. i did as u said.. wen i reboot its showin logo wth traingle.. please BOSS>. please help me..
mapps563 said:
hey please bro.. m all crying here.. pleas pleas help me.. please.. i ll begu.. tell me wot i should do next.. please .. XDA. help me.. please.. wot shld i do now.. i did as u said.. wen i reboot its showin logo wth traingle.. please BOSS>. please help me..
Click to expand...
Click to collapse
did you wiped data, cache etc ? Hold on, don't panic yet.
yes bro.. i wiped both.. clearly .. its the same.. please.. u r ma lifesaver . please bro.. please. 1000% i ve done correctly as u said.. its showing same.. Samsung logo with triangle yellow colored
mapps563 said:
yes bro.. i wiped both.. clearly .. its the same.. please.. u r ma lifesaver . please bro.. please. 1000% i ve done correctly as u said.. its showing same.. Samsung logo with triangle yellow colored
Click to expand...
Click to collapse
Download this file http://d-h.st/WUU and copy it in your SD card. flash it from recovery
You can also try this Omega rom http://goo.gl/qrzXE
Both are XXLSJ (Jelly Beans 4.1.2 based )
bro if i install this omega rom wil my phone turn on ..?? and what about that triangle symbol ? wil it go ?? and more over my phone was not rooted.. how will it take Omega rom when i ve not rooted my phone.. please reply
mapps563 said:
bro if i install this omega rom wil my phone turn on ..?? and what about that triangle symbol ? wil it go ?? and more over my phone was not rooted.. how will it take Omega rom when i ve not rooted my phone.. please reply
Click to expand...
Click to collapse
It is rooted now, with philz kernel.
Yes it will turn on (personal experience)
For triangle you can use "triangle away" app after flashing the rom.
Sent from my GT-I9100 using Tapatalk 2
Hi all
Yesterday I flashed what supposed to be pixel experience rom and then it appears to be lineages 18 , but the phone now not entering recovery mode neither download mode and appears this message in screen , any one have solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you want to try this rmm bypass
[GUIDE][17.06.2019] RMM/KG bypass - Root/Install TWRP on Exynos Samsung after 2018
UPDATE 17.06.2019 - NEW RMM/KG bypass patch UPDATE 23.02.2019 - Pie and more Please take some time and read carefully the whole post. I am not and i won`t be responsable for anything. Disclaimer I am not responsible for bricked devices, dead...
forum.xda-developers.com
allosh99 said:
Hi all
Yesterday I flashed what supposed to be pixel experience rom and then it appears to be lineages 18 , but the phone now not entering recovery mode neither download mode and appears this message in screen , any one have solution? View attachment 5171281
Click to expand...
Click to collapse
YES I ALSO GOT SAME PROBLEM PLS ANYONE HELP
aravinddefy said:
YES I ALSO GOT SAME PROBLEM PLS ANYONE HELP
Click to expand...
Click to collapse
This is my fixing problems
( download official lastest rom from samsung and prepare odin)
Just let the phone boot into lineage rom
Turn on developers option
Turn on usb debugging
Then connect phone with pc
Open adb
Type adb devices
Allow pc connect to device then type adb reboot download
Then the phone will boot to download mode
Flash rom via odin- done
The problem is the phone continue rebooting I can't enter the system or recovery or download mode
allosh99 said:
The problem is the phone continue rebooting I can't enter the system or recovery or download mode
Click to expand...
Click to collapse
That's odd. Try to hold volume down+ bixby+ power button and release. It may boot into lineage.
Nothing is working it keeps on booting again and again and stuck in the logo screen can't enter bootloader or lineage os stuck in middle anyone help
CyderXDA said:
That's odd. Try to hold volume down+ bixby+ power button and release. It may boot into the lineage.
Click to expand...
Click to collapse
Nothing is working it keeps on booting again and again and stuck in the logo screen can't enter bootloader or lineage os stuck in middle anyone help
Try this.
1. Open up Odin in your PC, make sure you got the USB drivers installed too.
2. Connect your phone with the cable.
3. Hold Vol Down + Power, to cold reboot.
4. As soon as it reboots, QUICKLU HOLD Vol Down + Bixby + Power button.
I've locked myself on the Kernel issue when changing CSC, and found out that this was the only way i could get in to Download Mode. It wont go inside if the cable is not connected to the PC and Odin isn't up.
It can be tricky to find that perfect moment for pressing the buttons, so dont give up easily.
If you notice no luck, Repeat the same process, but make the cable ready but dont connect it, cold-reboot and as soon as it reboots, connect the cable and do the download mode button layout.
PlutoDelic said:
Try this.
1. Open up Odin in your PC, make sure you got the USB drivers installed too.
2. Connect your phone with the cable.
3. Hold Vol Down + Power, to cold reboot.
4. As soon as it reboots, QUICKLU HOLD Vol Down + Bixby + Power button.
I've locked myself on the Kernel issue when changing CSC, and found out that this was the only way i could get in to Download Mode. It wont go inside if the cable is not connected to the PC and Odin isn't up.
It can be tricky to find that perfect moment for pressing the buttons, so dont give up easily.
If you notice no luck, Repeat the same process, but make the cable ready but dont connect it, cold-reboot and as soon as it reboots, connect the cable and do the download mode button layout.
Click to expand...
Click to collapse
thanks bro tried for 2 hours but nothing is working tried everysteps
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
Any help out there
Can't you just flash official rom from the screen you show in the first post? It doesn't necessarily need to boot into proper download mode to flash official rom. I mean your phone cannot boot into download mode, so just try to flash the rom from the screen.
hello everyone, i have a technical question. is it possible to root lineage 18.1 (android 11) only by operating on a working system ?? (something like kingoroot) ... after gaining root, you can access the partition and load recovery again ....
I am probably the first victim of uploading this fake software, after analyzing the rom on the telegram (exynos 9810), wise heads said that after uploading the software, the lack of recovery and the download mode is a deliberate action of the perpetrator. so I think root can help, I remember that I performed a similar operation when I could not connect the tablet galaxy tab 2 to the pc, then root and upload the recovery from a working android ....
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
aravinddefy said:
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
Click to expand...
Click to collapse
Did you find a solution?
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
aravinddefy said:
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
Click to expand...
Click to collapse
I replaced the motherboard in my own, I am waiting for a way to root from the level of the system itself, it should be possible to do a flash recovery partition and bootloader ..... the old motherboard is waiting for better times