hi XDA .. i m from india. basically i am new to android. i wanted to update my firmware to jellybean 4.1.2 .. when i googled it it asked for root..actually i have Galaxy S2 I9100 not rooted (stock) .. i got a blog when i searched for how to root.. den i found this blog "technoxide.com/2012/11/root-galaxy-s2-jelly-bean-4.1.2-xxlsj" . i downloaded dat file and copied to external SD card and followed instructions.. after applying that update from external SD card .. i rebooted. from that time my phone is not switching on.. it just shows "" Samsung logo " .. its not even entering into recovery mode.. please help.. please please
mapps563 said:
hi XDA .. i m from india. basically i am new to android. i wanted to update my firmware to jellybean 4.1.2 .. when i googled it it asked for root..actually i have Galaxy S2 I9100 not rooted (stock) .. i got a blog when i searched for how to root.. den i found this blog "technoxide.com/2012/11/root-galaxy-s2-jelly-bean-4.1.2-xxlsj" . i downloaded dat file and copied to external SD card and followed instructions.. after applying that update from external SD card .. i rebooted. from that time my phone is not switching on.. it just shows "" Samsung logo " .. its not even entering into recovery mode.. please help.. please please
Click to expand...
Click to collapse
That blog has posted the wrong kernel. We already seen another victim http://forum.xda-developers.com/showthread.php?t=2069398
to solve this do either of these
Download Philz Kernel for XXLSJ from here http://www.mediafire.com/?2d893461cjg2rbe. and follow these instructions
Boot into download mode. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key
start odin3 (download Link ) and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://forum.xda-developers.com/showpost.php?p=31310884&postcount=3
Or
Use Siyah Kernel
Download Siyah Kernel from here http://d-h.st/hcS . and follow these instructions
Boot into download mode. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key
start odin3 (download Link ) and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
Deleted
i downloaded files and configured.. but wen i press volume key down + home + power its showing " Warning ! A custom OS can cause critical problems in phone and installed applications . if you want to download a custom OS,press the volume up key, otherwise, press the volume down key to cancel "
please wot shld i do now.. more over after connecting to Pc.. that ODIN Yellow coloured it shld come ..but its nt showin here:crying:
mapps563 said:
i downloaded files and configured.. but wen i press volume key down + home + power its showing " Warning ! A custom OS can cause critical problems in phone and installed applications . if you want to download a custom OS,press the volume up key, otherwise, press the volume down key to cancel "
Click to expand...
Click to collapse
Yes you have to press up key. It will take you to download mode.
Also you will need Samsung drivers. You can either get them as a standalone drivers package
or
just install kies run it once and kill all kies processes from tasks manager before running ODIN
Sent from my GT-I9100 using Tapatalk 2
seriously i missed a step.. i pressed a volume up key and i pressed start button odiin.. it came ok.. den now i am restarting its the same but now its with a triangle mark..symbol shown.. please .. please complete step by step..wot n all i shld do.. please write it in a single reply.. please DRRAPTOR..please..
am not understanding download mode from where it wil download .. do i have to wait 4 some time ?? please dude.. please
please i don want anything.. i just want my phone to turn on.. please guide me.. pleas please
Now do this,
1. Shutdown your device.
2. Reboot in recovery by pressing "power" + "home" + "volume down". And wait until it is in recovery.
3. Wipe data/factory reset. Also wipe cache.
4. Reboot
5.success
Sent from my GT-I9100 using Tapatalk 2
i shutdown my device.. now i pressed volume down +home+power.. again its saying dat previous message.. "Warning ! A custom OS can cause critical problems in phone and installed applications . if you want to download a custom OS,press the volume up key, otherwise, press the volume down key to cancel ".. now wot shld i do.. how long should i wait to get downloaded
mapps563 said:
i shutdown my device.. now i pressed volume down +home+power.. again its saying dat previous message.. "Warning ! A custom OS can cause critical problems in phone and installed applications . if you want to download a custom OS,press the volume up key, otherwise, press the volume down key to cancel ".. now wot shld i do.. how long should i wait to get downloaded
Click to expand...
Click to collapse
Now pres vol up button and you are in download mode.
please help
how long shld i wait to get download finish.. pleas pleas help.. from where it ll download.. do i need to connect anything. pleas pleas..
mapps563 said:
how long shld i wait to get download finish.. pleas pleas help.. from where it ll download.. do i need to connect anything. pleas pleas..
Click to expand...
Click to collapse
When it is in download mode, connect it to your pc and setup ODIN as mentioned earlier. And flash philz method
Sent from my GT-I9100 using Tapatalk 2
i did as u said .. but again its same.. showing logo with triangle.. den not switching on.. should i go to recovery mode and clear that as u said.. please do reply
mapps563 said:
i did as u said .. but again its same.. showing logo with triangle.. den not switching on.. should i go to recovery mode and clear that as u said.. please do reply
Click to expand...
Click to collapse
Yes you should do the following
Reboot into recovery.
You will see something like this
Select "Wipe Data/Factory reset" wait for it finish
Select " Cache Partition" and wait for it to finish
Select reboot system.
Success
hey please bro.. m all crying here.. pleas pleas help me.. please.. i ll begu.. tell me wot i should do next.. please .. XDA. help me.. please.. wot shld i do now.. i did as u said.. wen i reboot its showin logo wth traingle.. please BOSS>. please help me..
mapps563 said:
hey please bro.. m all crying here.. pleas pleas help me.. please.. i ll begu.. tell me wot i should do next.. please .. XDA. help me.. please.. wot shld i do now.. i did as u said.. wen i reboot its showin logo wth traingle.. please BOSS>. please help me..
Click to expand...
Click to collapse
did you wiped data, cache etc ? Hold on, don't panic yet.
yes bro.. i wiped both.. clearly .. its the same.. please.. u r ma lifesaver . please bro.. please. 1000% i ve done correctly as u said.. its showing same.. Samsung logo with triangle yellow colored
mapps563 said:
yes bro.. i wiped both.. clearly .. its the same.. please.. u r ma lifesaver . please bro.. please. 1000% i ve done correctly as u said.. its showing same.. Samsung logo with triangle yellow colored
Click to expand...
Click to collapse
Download this file http://d-h.st/WUU and copy it in your SD card. flash it from recovery
You can also try this Omega rom http://goo.gl/qrzXE
Both are XXLSJ (Jelly Beans 4.1.2 based )
bro if i install this omega rom wil my phone turn on ..?? and what about that triangle symbol ? wil it go ?? and more over my phone was not rooted.. how will it take Omega rom when i ve not rooted my phone.. please reply
mapps563 said:
bro if i install this omega rom wil my phone turn on ..?? and what about that triangle symbol ? wil it go ?? and more over my phone was not rooted.. how will it take Omega rom when i ve not rooted my phone.. please reply
Click to expand...
Click to collapse
It is rooted now, with philz kernel.
Yes it will turn on (personal experience)
For triangle you can use "triangle away" app after flashing the rom.
Sent from my GT-I9100 using Tapatalk 2
Related
hye....pliz help me to fix this problem....my sgs2 cant reboot after i have been try to install ics using odin...my phone showed that hp symbol-danger symbol-computer symbol (all in yellow colour).....pliz help me...show ho to fix this problem step by step....
Try English when you post gibberish is hard to understand .
One take the battery out .
Two if that fails post a better description of whats wrong and where it went wrong .
10
jje
aisa89 said:
hye....pliz help me to fix this problem....my sgs2 cant reboot after i have been try to install ics using odin...my phone showed that hp symbol-danger symbol-computer symbol (all in yellow colour).....pliz help me...show ho to fix this problem step by step....
Click to expand...
Click to collapse
You doing something wrong. Enable usb debugging in settings, turn off you phone, click vol down+power +home button. Phone will boot in download mode, click vol up to continue, close kies on you pc, open odin, click on pda select you rom click start, after finish, phone will reboot. Done
Try reflashing...
aisa89 said:
hye....pliz help me to fix this problem....my sgs2 cant reboot after i have been try to install ics using odin...my phone showed that hp symbol-danger symbol-computer symbol (all in yellow colour).....pliz help me...show ho to fix this problem step by step....
Click to expand...
Click to collapse
I think what ur phone got into was an incomplete flashing process....maybe you should try reflashing it...in download mode with any other firmware (official one is recommended),.....hope it fixes....if doesn't try to explain in more detail about the problem...and also please kill kies's process from the task manager...odin and kies are like enemies...they dont allow each other to work properly...
i have this phone with non working home button
i am new here in this forum...and its my first time to have galaxy s2 before i have iphone...so..
i need help...i want to restore my phone to stock firmware?any tutorial?
i want to delete everything and i install at the beggning...
and home button is not working!
DMXSTORM said:
i have this phone with non working home button
i am new here in this forum...and its my first time to have galaxy s2 before i have iphone...so..
i need help...i want to restore my phone to stock firmware?any tutorial?
Click to expand...
Click to collapse
all the things that you would want to know is in this sticky:
http://forum.xda-developers.com/showthread.php?t=1648351
DMXSTORM said:
i want to delete everything and i install at the beggning...
Click to expand...
Click to collapse
after you read and understand how to flash firmware using odin, and fully aware of what could go wrong, from the guides in the sticky topic i posted above
you will find unbranded stock firmwares in here:
http://forum.xda-developers.com/showthread.php?t=1544487
DMXSTORM said:
and home button is not working!
Click to expand...
Click to collapse
well, i would suggest ebay for a replacement if you are confident enough replacing it yourself, or send it for repair at a local repair shop
thanks for your answer.
my problem is my HOME button not working.
i can install firmware without home?
DMXSTORM said:
thanks for your answer.
my problem is my HOME button not working.
i can install firmware without home?
Click to expand...
Click to collapse
yes, if you have CWM installed:
open cwm manager > under reboot choose Download mode > use odin to flash official firmware
If you are rooted you can use button savior on the play store https://play.google.com/store/apps/details?id=com.smart.swkey
It will give you a virtual home button
Sent from my Galaxy Nexus using xda premium
i am not ROYTED.
were can i find CWM ?adroid market?
DMXSTORM said:
i am not ROYTED.
were can i find CWM ?adroid market?
Click to expand...
Click to collapse
You don't need ROOT for Button Savior if you need only the home button, power off ...[other options may need the root]
DMXSTORM said:
i am not ROYTED.
were can i find CWM ?adroid market?
Click to expand...
Click to collapse
DMXSTORM said:
i want to restore my phone to stock firmware?
Click to expand...
Click to collapse
i was under the impression that you are not on stock?
if the home button is not working physically, i would either replace it or take collingall's advice
if you still want to flash official firmware, the third option will be a "usb jig"
---------------------------------------------------------
edit:
supermult said:
Hi,
I also have a phone with a dead home button and i learned my way to handle it.
Try plugging in usb and holding volume down at the same time.
I don´t know why but this always got me into download mode.
Click to expand...
Click to collapse
i have version 4.0.4 original but i want to install fresh because lot of programs install and my device is very slow now.
sorry but i am NEW here who is collingall's??
YES i want to install official firmware(but without HOME BUTTON)???!!??
How to use usb jig??you need ROOT?
JUST now i try to restart my phone and i press volume down and something happent...
''Warning!!
its say something to restore to custom firmaware!
can i install the official firmware like this?or ''maybe LATER 'i must USE home?
Buy a USB jig. Its a dongle which, when plugged into the phone, forces your phone into download mode. From there you can flash any official firmware (via Odin) for your model. You don't need root permissions for it.
Sent from my GT-I9100 using Tapatalk 2
i try supermult method for download mode and works!!
i connect my device with mini usb to pc and i press volume down and restart phone and....DOWNLOAD MODE SAYS...
Warning !!
A custom OS can cause critical
problems on phone and instaled
applications.
if you want to download a custom
OS,press the volume up key.
Otherwise,press the volume down
key to cancel.
Volume up : Continue
Volume down : Cancel (restart phone)
its this the DOWNLOAD MODE??TELL ME PLEASE...??!??
can i use odin now?
Press Volume Up and you will be in Download Mode.
Yes, press volume up and you'll be in the download mode. Connect your phone to your PC, start Odin and flash away.
Sent from my GT-I9100 using Tapatalk 2
i need the official firmware s2(greece)and odin for download....
send me the link where to download....!!
DMXSTORM said:
i need the official firmware s2(greece)and odin for download....
send me the link where to download....!!
Click to expand...
Click to collapse
GT-I9100 - Greece 4.0.3 2012-04-10
GT-I9100 - Greece (Vodafone) 4.0.3 2012-06-11
GT-I9100 - Greece (Cosmote) 4.0.4 2012-08-31
Odin3-v1.85.zip
THANKS ALL FOR YOUR HELP
i use idin and official firmware but the phone not delete nothing!!why?i have all the programs again and the pictures...
i need fresh firmware install...not from buckup....
guides for odin
DMXSTORM said:
THANKS ALL FOR YOUR HELP
i use idin and official firmware but the phone not delete nothing!!why?i have all the programs again and the pictures...
i need fresh firmware install...not from buckup....
Click to expand...
Click to collapse
willk22 said:
OdinOdin is a piece of software that allows us to flash anything we want to the phone. The file is attached to the bottom of this post.
It is perfectly safe IF USED CORRECTLY!
This is a general guide for using Odin, take a look at this picture (thanks to screamworks):
To get Odin to connect to your phone, you need to boot into 'download mode' by pressing volume down, home, and power keys at the same time, and connect your phone to your PC via USB.
Everything in red:
NEVER TOUCH
NEVER TOUCH
NEVER TOUCH
NEVER TOUCH
Click to expand...
Click to collapse
Intratech said:
1. Just download the firmware version you want
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1
If the package has more than one .tar archive then they will be labelled with PDA, Phone/Modem and CSC. Just put them in the corresponding section of Odin
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Anyone ask about .pit file is a moron
Should look like this screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the package has 3 files it should look like this:
Regardless of firmware version it's still the same methodology
6. Connect the USB cable and wait for the ID:COM section to turn yellow
7. Click start to flash
8. Do not disconnect the cable or turn off the device, it will reboot when it finishes.
It will not wipe your phone if you flash as recommended
Click to expand...
Click to collapse
help i try this and mobtle says=
firmwar upgrade encountered
an issue.Please select
recovery mode in kies k try again.
DMXSTORM said:
help i try this and mobtle says=
firmwar upgrade encountered
an issue.Please select
recovery mode in kies k try again.
Click to expand...
Click to collapse
do you have Kies installed?
please provide all the steps you took with all the details
i fix it no problem.
i dont now how to make a fresh restore??!!??
i want to install fresh firmware with no programs i have allready install....
and no my settings and my personalization...
can i delete everything?just a new s2?
Samsung S3 i9300 restart on samsung logo and not going in download mode or recvery mode... i give u solution. i tested in many sets....
switch off ur mobile and then plug usb in and connect ur set with pc ,
then use volume up + home + power for recover mode.
now ur in recovery mode option then select wipe data,
now restart ur set.... now ur set 100000% ok
i teste in many sets...its working well....... so enjoy frnds
mobilecare_786 said:
Samsung S3 i9300 restart on samsung logo and not going in download mode or recvery mode... i give u solution. i tested in many sets....
switch off ur mobile and then plug usb in and connect ur set with pc ,
then use volume up + home + power for recover mode.
now ur in recovery mode option then select wipe data,
now restart ur set.... now ur set 100000% ok
i teste in many sets...its working well....... so enjoy frnds
Click to expand...
Click to collapse
EASIER METHOD remove battery replace and boot to recovery mode .
jje
i don't understand why to connect to a pc when you can just remove and insert battery to enter recovery mode as already stated above!
dear frnd many time its keep restarting and not going in recovery mode... so i give that solution i hope you understand now what i want to say
mobilecare_786 said:
dear frnd many time its keep restarting and not going in recovery mode... so i give that solution i hope you understand now what i want to say
Click to expand...
Click to collapse
Probable user error not know how to get recovery mode .
volume up + home + power for recover mode.
jje
everyone know how to get in recovery mode.... but its always restart when android logo comes and its also restart when its ask to go in download mde..... now u understand bro....
sriram231092 said:
i don't understand why to connect to a pc when you can just remove and insert battery to enter recovery mode as already stated above!
Click to expand...
Click to collapse
everyone know how to get in recovery mode.... but its always restart when android logo comes and its also restart when its ask to go in download mde..... now u understand bro....
you need to let go of the power button when the logo comes up
arafa
i9300 constantly auto restartying pls help me very urgent
mobilecare_786 said:
Samsung S3 i9300 restart on samsung logo and not going in download mode or recvery mode... i give u solution. i tested in many sets....
switch off ur mobile and then plug usb in and connect ur set with pc ,
then use volume up + home + power for recover mode.
now ur in recovery mode option then select wipe data,
now restart ur set.... now ur set 100000% ok
i teste in many sets...its working well....... so enjoy frnds
Click to expand...
Click to collapse
Im done what you said. But. After that it is same as before...now what to do?
Good morning,i have galaxy ace s5830i.The phone not entering in download mode and recovery mode.I hold the power button and phone freeze on boot "samsung galaxy ace s5830i".I have jig when connect jig with phone i see black screen with "samsung galaxy ace s5830i"
sorry for bad english
erevanioths89 said:
Good morning,i have galaxy ace s5830i.The phone not entering in download mode and recovery mode.I hold the power button and phone freeze on boot "samsung galaxy ace s5830i".I have jig when connect jig with phone i see black screen with "samsung galaxy ace s5830i"
sorry for bad english
Click to expand...
Click to collapse
Flash Stock ROM via ODIN
sorry for bad english[/QUOTE]
no entering download mode & recovery..
erevanioths89 said:
sorry for bad english
no entering download mode & recovery..
Click to expand...
Click to collapse
Right Combinations for Recovery - Vol up + Power + Home
And for Download Mode - Vol up + Vol down + Power
Are you following these ?
Hitesh2626 said:
Right Combinations for Recovery - Vol up + Power + Home
And for Download Mode - Vol up + Vol down + Power
Are you following these ?
Click to expand...
Click to collapse
Yes i following these.I see black screen with this "samsung galaxy ace s5830i"
erevanioths89 said:
Yes i following these.I see black screen with this "samsung galaxy ace s5830i"
Click to expand...
Click to collapse
Its Difficult to find out now if both are not working try out with USB JIG
Hitesh2626 said:
Its Difficult to find out now if both are not working try out with USB JIG
Click to expand...
Click to collapse
Not working with usb jig..
erevanioths89 said:
Not working with usb jig..
Click to expand...
Click to collapse
Last Option give it to Service Center .
erevanioths89 said:
Good morning,i have galaxy ace s5830i.The phone not entering in download mode and recovery mode.I hold the power button and phone freeze on boot "samsung galaxy ace s5830i".I have jig when connect jig with phone i see black screen with "samsung galaxy ace s5830i"
sorry for bad english
Click to expand...
Click to collapse
first take off the battery, then hold power button+home+volumen up for 6 seconds, after 6 seconds make half second pause and again press volumen up+home+power and hold for 6 seconds
try this
Angryace said:
first take off the battery, then hold power button+home+volumen up for 6 seconds, after 6 seconds make half second pause and again press volumen up+home+power and hold for 6 seconds
try this
Click to expand...
Click to collapse
Nothing my friend..
erevanioths89 said:
Good morning,i have galaxy ace s5830i.The phone not entering in download mode and recovery mode.I hold the power button and phone freeze on boot "samsung galaxy ace s5830i".I have jig when connect jig with phone i see black screen with "samsung galaxy ace s5830i"
sorry for bad english
Click to expand...
Click to collapse
If you bricked your device obviously you cant go into Recovery mode ..
I think you used wrong combi for going into download mode
Again check by Going into Download mode (Volume up+volume down+power button).
Now flash stock rom via ODIN .. Anyway dont panic buddy
Mr.Gentleman said:
If you bricked your device obviously you cant go into Recovery mode ..
I think you used wrong combi for going into download mode
Again check by Going into Download mode (Volume up+volume down+power button).
Now flash stock rom via ODIN .. Anyway dont panic buddy
Click to expand...
Click to collapse
Hello my friend,
nothing with this combination.I see only black screen who say "samsung galaxy ace s5830i"
open odin
remove battery. press the volume+ and volume- keys.
connect usb to pc while holding the keys
if necessary then press the power key
you will get a blank screen
now press the volume+ key
odin will recognise your device
if you want the download mode screen back then use the bootloader file while installing via odin
and try odin flashing again
Hey!
The black screen you see is the download mode! Again press the volume up and connect it to the system with ODIN running! It will recognise your device! Then flash the stock rom! Hope it will be helpful!
Hit thanks if helped!
achuakshay said:
The black screen you see is the download mode!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mr.Gentleman said:
View attachment 2483287
Click to expand...
Click to collapse
What happened dude?
achuakshay said:
What happened dude?
Click to expand...
Click to collapse
Download mode is black screen ??
[sarcasm]Sorry my mistake,you must be senior.ERD !! ... -_- [/sarcasm]
[non-sarcastic]Buddy, download mode ain't Black screen ..[/non-sarcastic]
It happens bro!
Bro, I got it once! But when i connected to the system it recognized and i flashed the stock rom successfully..
BTW thanks for calling me "buddy".. Cuz u were happy that @mathm2013 trolled me!
Mr.Gentleman said:
Download mode is black screen ??
[sarcasm]Sorry my mistake,you must be senior.ERD !! ... -_- [/sarcasm]
[non-sarcastic]Buddy, download mode ain't Black screen ..[/non-sarcastic]
Click to expand...
Click to collapse
the black screen is download mode itself. it is just that you cant see it. if you flash bootloader file via odin then once again you can see it
achuakshay said:
Bro, I got it once! But when i connected to the system it recognized and i flashed the stock rom successfully..
BTW thanks for calling me "buddy".. Cuz u were happy that @mathm2013 trolled me!
Click to expand...
Click to collapse
Read this post.
I cant flash stock rom
I can ONLY go to download mode, there is no recovery.
When I try to boot normally I get this screen
I read all threads before i start a new one but no luck
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
===================================================================================================
I Tried to go to CWM Recovery to format the system and try to flash the stock firmware again. but no way
So I Tried to ROOT My "GT-I9300" AGAIN to get CWM Recovery
______Let us begin______
1. Download the TAR CWM recovery file , ODIN zip file and unzip the files , SuperSU zip file
http://www.mediafire.com/download/5fc53nyacjxubi9/Root_Galaxy_S3_on_Android_4.3_4.4.2__
2. Power off Galaxy S3. Then hold down Volume down, Center Home, and Power buttons together until you see a warning screen. Let go of all buttons.
3. Hit Volume Up to enter ODIN Download mode then connect a USB cable from your S3 to your computer.
4. Double-click on “odin3v1.85.exe” to start ODIN program.
5. You should see a yellow-highlighted box with a random COM number. Once you see the yellow-highlighted box you are ready to go, hit the “PDA” button.
6. Find the TAR CWM recovery file you downloaded earlier in Step 1 and choose it.
7. Hit “Start” and it should take about 5 seconds for ODIN program to flash CWM Recovery to your Galaxy S3 and you will see “PASS!” when it’s done. Your phone should reboot.
8. Once your phone has rebooted hold down Volume Up, Center Home, and Power button together.When you see the Samsung logo, let go of Power button but keep holding down Volume Up and Center Home buttons.
9. You should now be in CWM Recovery.
10. Make this step:
-wipe data,cache,dalvik
-format system, preload, internal sd
11. Repeat the steps 2,3,4,5
Once you see the yellow-highlighted box you are ready to go, hit the “PDA” button and Find the Stock firmware and choose it and Hit “Start” you will see “PASS!” when it’s done. Your phone should
reboot.
--------------------------
*******DONE*******
--------------------------
==================================
Root Galaxy S3 on Android 4.3_4.4.2 [NEW]
All credits go to @zedomax
http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3-on-android-4-34-4-2-new/
==================================
Flash firmware with Odin, read the sticky guide in general forum
boomboomer said:
Flash firmware with Odin, read the sticky guide in general forum
Click to expand...
Click to collapse
thanx man for reply
This is not the first time I Flash firmware with Odin. but this time simply I cant do it again
You don't give any information on why not.
I had the same problem but after trying a few times it worked
boomboomer said:
You don't give any information on why not.
Click to expand...
Click to collapse
I’ll explain Why No !!!!!!!!!!!
every time i try to flash the stock firmware with Odin. the program start to flash as usual BUT before end of the process the program say FAILD and I get that screen.
then try to remove the battery and put it back and try to flash over and over again but no chance.
I can’t even go to the recovery
medostar00 said:
I’ll explain Why No !!!!!!!!!!!
every time i try to flash the stock firmware with Odin. the program start to flash as usual BUT before end of the process the program say FAILD and I get that screen.
then try to remove the battery and put it back and try to flash over and over again but no chance.
I can’t even go to the recovery
Click to expand...
Click to collapse
Whats the link to the stock rom your trying to flash?
Darke5tShad0w said:
Whats the link to the stock rom your trying to flash?
Click to expand...
Click to collapse
Thanx 4 your concern
the problem not in the firmware because I flash the same firmware on other cell phone and every thing DONE like a charm
medostar00 said:
Thanx 4 your concern
the problem not in the firmware because I flash the same firmware on other cell phone and every thing DONE like a charm
Click to expand...
Click to collapse
Where they all i9300?
Darke5tShad0w said:
Where they all i9300?
Click to expand...
Click to collapse
YES they are
Sounds like your motherboard is toasted.
boomboomer said:
Sounds like your motherboard is toasted.
Click to expand...
Click to collapse
I DON’T THINK SO
I’ll find a solution soon
medostar00 said:
I DON’T THINK SO
I’ll find a solution soon
Click to expand...
Click to collapse
Can i ask why you have come here for support when you disagree with all the help that has been given?
You have given us little to no information like odin logs, process you have taken or file names etc when requested besides a worthless picture that hasnt been seen on the i9300 before.
I agree with boomboomer, you could try the rescue firmware it maybe you last hope you can find it in the stickies.
Darke5tShad0w said:
Can i ask why you have come here for support when you disagree with all the help that has been given?
You have given us little to no information like odin logs, process you have taken or file names etc when requested besides a worthless picture that hasnt been seen on the i9300 before.
I agree with boomboomer, you could try the rescue firmware it maybe you last hope you can find it in the stickies.
Click to expand...
Click to collapse
First of all ... I want to thank everyone write a single word in this thread for help
second .. I don’t disagree with any help but when somebody tell you that your motherboard is toasted. tell me what you can do about that ??
medostar00 said:
I cant flash stock rom
I can ONLY go to download mode, there is no recovery.
When I try to boot normally I get this screen
I read all threads before i start a new one but no luck
=====================================================================================================
I Tried to go to CWM Recovery to format the system and try to flash the stock firmware again. but no
way
So I Tried to ROOT My "GT-I9300" AGAIN to get CWM Recovery
______Let us begin______
1. Download the TAR CWM recovery file , ODIN zip file and unzip the files , SuperSU zip file
http://www.mediafire.com/download/5fc53nyacjxubi9/Root_Galaxy_S3_on_Android_4.3_4.4.2__
2. Power off Galaxy S3. Then hold down Volume down, Center Home, and Power buttons together until you see a warning screen. Let go of all buttons.
3. Hit Volume Up to enter ODIN Download mode then connect a USB cable from your S3 to your computer.
4. Double-click on “odin3v1.85.exe” to start ODIN program.
5. You should see a yellow-highlighted box with a random COM number. Once you see the yellow-highlighted box you are ready to go, hit the “PDA” button.
6. Find the TAR CWM recovery file you downloaded earlier in Step 1 and choose it.
7. Hit “Start” and it should take about 5 seconds for ODIN program to flash CWM Recovery to your Galaxy S3 and you will see “PASS!” when it’s done. Your phone should reboot.
8. Once your phone has rebooted hold down Volume Up, Center Home, and Power button together.When you see the Samsung logo, let go of Power button but keep holding down Volume Up and Center Home buttons.
9. You should now be in CWM Recovery.
10. Make this step:
-wipe data,cache,dalvik
-format system, preload, internal sd
11. Repeat the steps 2,3,4,5
Once you see the yellow-highlighted box you are ready to go, hit the “PDA” button and Find the Stock firmware and choose it and Hit “Start” you will see “PASS!” when it’s done. Your phone should
reboot.
--------------------------
*******DONE*******
--------------------------
==================================
Root Galaxy S3 on Android 4.3_4.4.2 [NEW]
All credits go to @zedomax
http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3-on-android-4-34-4-2-new/
==================================
Click to expand...
Click to collapse
Finally I Get My Precious "SG3_GT-I9300" BACK :laugh::good: