My Xperia x10 boots, but get's stuck at the Xperia logo...then just sits there until the battery dies. It doesn't charge once it gets to this point apparently. I can get to recovery, but that's it. I cannot get this into Flash Mode. Any help would be greatly appreciated. I'm just trying to get this back to a usable state (that charges).
The weird thing is once the phones has enough of a charge to boot, it automatically boots, then gets stuck at the logo again, then dies dies again. I can at least get it into recovery, but no indicator about battery level and if it's charging.
Any help would be greatly appreciated, all I'm really looking to do is turn this into a media player with wifi.
EDIT: when trying to get into flash mode (so I can use the Flashtool), I get the following error:
Code:
15/038/2013 22:38:15 - INFO - <- This level is successfully initialized
15/038/2013 22:38:15 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
15/038/2013 22:38:33 - INFO - Device disconnected
15/038/2013 22:38:41 - INFO - Selected es209ra / null / 4.1.2
15/038/2013 22:38:41 - INFO - Preparing files for flashing
15/038/2013 22:38:41 - INFO - Please connect your device into flashmode.
15/038/2013 22:38:56 - INFO - Device connected in flash mode
15/038/2013 22:38:56 - INFO - Opening device for R/W
15/038/2013 22:38:56 - INFO - Start Flashing
15/038/2013 22:38:56 - INFO - Processing loader.sin
15/038/2013 22:38:56 - INFO - Checking header
15/038/2013 22:38:56 - INFO - Ending flash session
15/038/2013 22:38:56 - ERROR -
15/038/2013 22:38:56 - ERROR - Error flashing. Aborted
15/038/2013 22:38:57 - INFO - Device connected in flash mode
SynGamer said:
My Xperia x10 boots, but get's stuck at the Xperia logo...then just sits there until the battery dies. It doesn't charge once it gets to this point apparently. I can get to recovery, but that's it. I cannot get this into Flash Mode. Any help would be greatly appreciated. I'm just trying to get this back to a usable state (that charges).
The weird thing is once the phones has enough of a charge to boot, it automatically boots, then gets stuck at the logo again, then dies dies again. I can at least get it into recovery, but no indicator about battery level and if it's charging.
Any help would be greatly appreciated, all I'm really looking to do is turn this into a media player with wifi.
EDIT: when trying to get into flash mode (so I can use the Flashtool), I get the following error:
Code:
15/038/2013 22:38:15 - INFO - <- This level is successfully initialized
15/038/2013 22:38:15 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
15/038/2013 22:38:33 - INFO - Device disconnected
15/038/2013 22:38:41 - INFO - Selected es209ra / null / 4.1.2
15/038/2013 22:38:41 - INFO - Preparing files for flashing
15/038/2013 22:38:41 - INFO - Please connect your device into flashmode.
15/038/2013 22:38:56 - INFO - Device connected in flash mode
15/038/2013 22:38:56 - INFO - Opening device for R/W
15/038/2013 22:38:56 - INFO - Start Flashing
15/038/2013 22:38:56 - INFO - Processing loader.sin
15/038/2013 22:38:56 - INFO - Checking header
15/038/2013 22:38:56 - INFO - Ending flash session
15/038/2013 22:38:56 - ERROR -
15/038/2013 22:38:56 - ERROR - Error flashing. Aborted
15/038/2013 22:38:57 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Hey my friend, maybe download again the kernel. Use FeraKernel v16 and FeraLab Rom v32 and put in your SD Card before flashing and also Start from zero and check in Flashtool "No final verification" & "reset cust.. "" And try it
Ronald G V A said:
Hey my friend, maybe download again the kernel. Use FeraKernel v16 and FeraLab Rom v32 and put in your SD Card before flashing and also Start from zero and check in Flashtool "No final verification" & "reset cust.. "" And try it
Click to expand...
Click to collapse
I cannot get the phone to register with my computer or my wife's. Windows keeps saying the USB device is damaged or unreadable. When in recovery I try to mount and it's successful, but it won't let me actually transfer files onto the phone.
SynGamer said:
I cannot get the phone to register with my computer or my wife's. Windows keeps saying the USB device is damaged or unreadable. When in recovery I try to mount and it's successful, but it won't let me actually transfer files onto the phone.
Click to expand...
Click to collapse
mmm So, Try in UNABLE the "" USB ENHANCED Host Controller """ in Device Managment and then Only Insert the USB with the BACK button pressed.. All of this, without the Flashtool...if the driver could be installed, Everything is correct and everytime that you want to flash an specific kernel you must do That, unable the enhanced host controller, flash your rom or kernel and the enable the host controller
Ronald G V A said:
mmm So, Try in UNABLE the "" USB ENHANCED Host Controller """ in Device Managment and then Only Insert the USB with the BACK button pressed.. All of this, without the Flashtool...if the driver could be installed, Everything is correct and everytime that you want to flash an specific kernel you must do That, unable the enhanced host controller, flash your rom or kernel and the enable the host controller
Click to expand...
Click to collapse
Do you have a guide on how to do that in Windows 8.1?
EDIT: here is a list of my USB section in Device Manager...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have 4 USB ports on my laptop + 2 more via a hub/notebook cooler. 3 of the 4 USB ports are 3.0 I believe (blue).
SynGamer said:
Do you have a guide on how to do that in Windows 8.1?
EDIT: here is a list of my USB section in Device Manager...
I have 4 USB ports on my laptop + 2 more via a hub/notebook cooler. 3 of the 4 USB ports are 3.0 I believe (blue).
Click to expand...
Click to collapse
How to Install on Windows 8:
1. Run Command Prompt as Admin.
2. Type:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS Press ENTER
bcdedit -set TESTSIGNING ON
3. Reboot, then install the driver IN FLASHTOOL/DRIVERS (X10, Fastboot, Flashmode) and reboot again after install finish.
4. Enable again the Driver Signature Enforcement:
bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS Press ENTER
bcdedit -set TESTSIGNING OFF
5. Reboot again.
And then When you're going to flash a kernel or a Rom DESACTIVATE USB ENHANCED (just unable the ones that says "Enhanced", and when it finished to flash, enable those usbs drivers again
PD: I HAVE WINDOWS 8.1 ENTERPRISE x64 !
Ronald G V A said:
How to Install on Windows 8:
1. Run Command Prompt as Admin.
2. Type:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS Press ENTER
bcdedit -set TESTSIGNING ON
3. Reboot, then install the driver IN FLASHTOOL/DRIVERS (X10, Fastboot, Flashmode) and reboot again after install finish.
4. Enable again the Driver Signature Enforcement:
bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS Press ENTER
bcdedit -set TESTSIGNING OFF
5. Reboot again.
And then When you're going to flash a kernel or a Rom DESACTIVATE USB ENHANCED (just unable the ones that says "Enhanced", and when it finished to flash, enable those usbs drivers again
PD: I HAVE WINDOWS 8.1 ENTERPRISE !
Click to expand...
Click to collapse
Followed your steps exactly, still getting the error...
Code:
16/021/2013 12:21:16 - INFO - Please connect your device into flashmode.
16/021/2013 12:21:17 - INFO - Opening device for R/W
16/021/2013 12:21:17 - INFO - Start Flashing
16/021/2013 12:21:17 - INFO - Processing loader.sin
16/021/2013 12:21:17 - INFO - Checking header
16/021/2013 12:21:17 - INFO - Ending flash session
16/021/2013 12:21:17 - ERROR -
16/021/2013 12:21:17 - ERROR - Error flashing. Aborted
16/021/2013 12:21:17 - INFO - Device connected in flash mode
SynGamer said:
Followed your steps exactly, still getting the error...
Code:
16/021/2013 12:21:16 - INFO - Please connect your device into flashmode.
16/021/2013 12:21:17 - INFO - Opening device for R/W
16/021/2013 12:21:17 - INFO - Start Flashing
16/021/2013 12:21:17 - INFO - Processing loader.sin
16/021/2013 12:21:17 - INFO - Checking header
16/021/2013 12:21:17 - INFO - Ending flash session
16/021/2013 12:21:17 - ERROR -
16/021/2013 12:21:17 - ERROR - Error flashing. Aborted
16/021/2013 12:21:17 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
mmmm So, Unable the eXtensible, Generic and Again Enhanced... if not, Unable everything...
Please I'm very sure your loader.sin in the Kernel or Rom you want to install is damaged, try to download it again
Ronald G V A said:
mmmm So, Unable the eXtensible, Generic and Again Enhanced... if not, Unable everything...
Please I'm very sure your loader.sin in the Kernel or Rom you want to install is damaged, try to download it again
Click to expand...
Click to collapse
Still no luck. I might have to just call this a lost cause and save up for a new phone
SynGamer said:
Still no luck. I might have to just call this a lost cause and save up for a new phone
Click to expand...
Click to collapse
Yes bro, me too. I'm saving for a new phone... :/
Alternate idea
Hi Syn,
I am experiencing likely problems at the moment, but have found one strange 'solution':
I am unable to flash a current kernel with nearly the same errors.
BUT I can successfully flash my 'old' stock rom and restart from there.
Strange thing is that the same flashtool works with the stock rom but cannot find the phone with a current kernel.
Wish you luck,
Alexej
Related
[Guide][28-01-12]Xtra Noob guide to help you to get 62 rooted for Neo & V Locked Bl
Alright this is a guide for those that have firmware 62 that can not be rooted,
if you have updated with official SE programs,
i help you people to get 62 rooted !!
This is working for both, Neo And Neo V
and this is with kernel and Firmware !!
Important !!! >> OTA << is over the AIR and NOT with Pc Companion !!!
I Hope That You Peeps Understand This NOW !!
I Dont Tell It 10,000 TIMES !!
* OTA is with the phone itself so no cables, pc etc. NEEDED !! *
For OTA do this:
* Go to Settings
* Go to about phone
* Go to software update
* 1st Install Flashtool. File here:
http://androxyde.github.com/Flashtool/
* If the new flashtool dont work for you, choose the older version of it !!
* Get the tft file here and choose for flashable 42
This is for Neo:
http://forum.xda-developers.com/showthread.php?t=1258723
This is for Neo V:
http://forum.xda-developers.com/showpost.php?p=19808360&postcount=3
* Then open de winzip file with win.rar or another program
and put the tft file into firmwares folder in the flashtool menu
(go to your computer then C driver and open flashtool en there you will see
firmwares folder so put the tft file there)
* Open flashtool(double click on the icon or shortcut you have make on you desktop
or go to your C driver and go to flashtool)
* Flashmode:
* Connect your device in flashmode,
* That is pressing the back button on you phone when it`s off
* Connect you usb cable
* wait till flashtool is done( phone reboots automatic)
* flash the file 42 with flashtool,
tick only wiping data & cache.
* turn you phone on
* set usb debugging on
* then go to flashool, advance, root and then
go to zergRush Exploit
* If the Root from flashtool dont work for you,
Use this from DooMlord:
http://forum.xda-developers.com/showthread.php?t=1320350
* your phone is rooted now and then do the OTA
to get firmware 62 and you done !!
* Last one to install CWM,
* Get the file here:
http://www.mediafire.com/?73xv18tht0e8zt4
these are the steps:
increase your screen timeout to 10 min !!
1. Extract the above files
2. Browse to the Folder
3.Enable USB Debugging on device
4.Connect your device using usb data cable
5. Run " install-cwm1.cmd" for Neo V
6.Follow on screen instruction
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Thanks to:
Gregbradley > Learned A Ton From Him, My Good Best Friend !!
Mazzit > To get rooted 62
eqlove196426597 > Neo ftf files
vimjam > Neo V ftf files
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Proof is here on my Neo V
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can I install cwm after using superoneclick
(superoneclick used the zergRUSH exploit)
And if yes, when installing clockwork mod recovery, do i have to keep the sd card mounted or unmount it?
But if we flash ONLY .42 kernel (kernel.sin) will it works?
Because kernel is 6Mb file only and all process is way faster. ??
Thanx
Sent from my HTC Desire using Tapatalk
28/034/2012 22:34:55 - INFO - Device connected in flash mode
28/035/2012 22:35:37 - INFO - Device disconnected
28/037/2012 22:37:42 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
28/037/2012 22:37:42 - INFO - Preparing files for flashing
28/037/2012 22:37:49 - INFO - Device connected in flash mode
28/038/2012 22:38:04 - INFO - Please connect your device into flashmode.
28/038/2012 22:38:04 - INFO - Opening device for R/W
28/038/2012 22:38:04 - INFO - Reading device information
28/038/2012 22:38:04 - INFO - Phone reading for flashing.
28/038/2012 22:38:05 - INFO - Start Flashing
28/038/2012 22:38:05 - INFO - Flashing loader
28/038/2012 22:38:07 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
28/038/2012 22:38:07 - INFO - Flashing adsp.sin
28/038/2012 22:38:10 - INFO - Flashing amss_fs.sin
28/038/2012 22:38:11 - INFO - Flashing fota1.sin
28/038/2012 22:38:12 - INFO - Flashing fota0.sin
28/038/2012 22:38:13 - INFO - Flashing apps_log.sin
28/038/2012 22:38:13 - INFO - Flashing amss.sin
28/038/2012 22:38:23 - INFO - Flashing system.sin
28/039/2012 22:39:05 - ERROR - Read error :31 : Urządzenie dołączone do komputera nie działa.
28/039/2012 22:39:05 - ERROR - Error flashing. Aborted
28/039/2012 22:39:06 - INFO - Device connected in flash mode
Adn what now?? Phone when start.... stop on SE screen and reboot
Kuter_tm said:
28/034/2012 22:34:55 - INFO - Device connected in flash mode
28/035/2012 22:35:37 - INFO - Device disconnected
28/037/2012 22:37:42 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
28/037/2012 22:37:42 - INFO - Preparing files for flashing
28/037/2012 22:37:49 - INFO - Device connected in flash mode
28/038/2012 22:38:04 - INFO - Please connect your device into flashmode.
28/038/2012 22:38:04 - INFO - Opening device for R/W
28/038/2012 22:38:04 - INFO - Reading device information
28/038/2012 22:38:04 - INFO - Phone reading for flashing.
28/038/2012 22:38:05 - INFO - Start Flashing
28/038/2012 22:38:05 - INFO - Flashing loader
28/038/2012 22:38:07 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
28/038/2012 22:38:07 - INFO - Flashing adsp.sin
28/038/2012 22:38:10 - INFO - Flashing amss_fs.sin
28/038/2012 22:38:11 - INFO - Flashing fota1.sin
28/038/2012 22:38:12 - INFO - Flashing fota0.sin
28/038/2012 22:38:13 - INFO - Flashing apps_log.sin
28/038/2012 22:38:13 - INFO - Flashing amss.sin
28/038/2012 22:38:23 - INFO - Flashing system.sin
28/039/2012 22:39:05 - ERROR - Read error :31 : Urządzenie dołączone do komputera nie działa.
28/039/2012 22:39:05 - ERROR - Error flashing. Aborted
28/039/2012 22:39:06 - INFO - Device connected in flash mode
Adn what now?? Phone when start.... stop on SE screen and reboot
Click to expand...
Click to collapse
Try again....
;/ i change USB and i think its work becouse
28/000/2012 23:00:10 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
28/000/2012 23:00:10 - INFO - Preparing files for flashing
28/000/2012 23:00:12 - INFO - Please connect your device into flashmode.
28/000/2012 23:00:28 - INFO - Device connected in flash mode
28/000/2012 23:00:28 - INFO - Opening device for R/W
28/000/2012 23:00:29 - INFO - Reading device information
28/000/2012 23:00:29 - INFO - Phone reading for flashing.
28/000/2012 23:00:29 - INFO - Start Flashing
28/000/2012 23:00:29 - INFO - Flashing loader
28/000/2012 23:00:31 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
28/000/2012 23:00:31 - INFO - Flashing adsp.sin
28/000/2012 23:00:34 - INFO - Flashing amss_fs.sin
28/000/2012 23:00:35 - INFO - Flashing fota1.sin
28/000/2012 23:00:36 - INFO - Flashing fota0.sin
28/000/2012 23:00:37 - INFO - Flashing apps_log.sin
28/000/2012 23:00:37 - INFO - Flashing amss.sin
28/000/2012 23:00:47 - INFO - Flashing system.sin
28/003/2012 23:03:12 - INFO - Flashing finished.
28/003/2012 23:03:12 - INFO - Please wait. Phone will reboot
28/003/2012 23:03:12 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
28/003/2012 23:03:13 - INFO - Device connected in flash mode
28/003/2012 23:03:14 - INFO - Device disconnected
28/003/2012 23:03:15 - INFO - Device connected in flash mode
I unplug phone power on i see sony ericsson and reboot again Sony Ericsson and reboot..... all the time WTF?
I think i see problem.... i have NEO (just) MT15i and soft is for Neo V its can be it?
As there is already a similar guide in Dev section I've moved this guide to general section where new members have no restriction of 10 posts. Thanks Pandemic for all the help! Best regards,
Kuter_tm said:
;/ i change USB and i think its work becouse
28/000/2012 23:00:10 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
28/000/2012 23:00:10 - INFO - Preparing files for flashing
28/000/2012 23:00:12 - INFO - Please connect your device into flashmode.
28/000/2012 23:00:28 - INFO - Device connected in flash mode
28/000/2012 23:00:28 - INFO - Opening device for R/W
28/000/2012 23:00:29 - INFO - Reading device information
28/000/2012 23:00:29 - INFO - Phone reading for flashing.
28/000/2012 23:00:29 - INFO - Start Flashing
28/000/2012 23:00:29 - INFO - Flashing loader
28/000/2012 23:00:31 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
28/000/2012 23:00:31 - INFO - Flashing adsp.sin
28/000/2012 23:00:34 - INFO - Flashing amss_fs.sin
28/000/2012 23:00:35 - INFO - Flashing fota1.sin
28/000/2012 23:00:36 - INFO - Flashing fota0.sin
28/000/2012 23:00:37 - INFO - Flashing apps_log.sin
28/000/2012 23:00:37 - INFO - Flashing amss.sin
28/000/2012 23:00:47 - INFO - Flashing system.sin
28/003/2012 23:03:12 - INFO - Flashing finished.
28/003/2012 23:03:12 - INFO - Please wait. Phone will reboot
28/003/2012 23:03:12 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
28/003/2012 23:03:13 - INFO - Device connected in flash mode
28/003/2012 23:03:14 - INFO - Device disconnected
28/003/2012 23:03:15 - INFO - Device connected in flash mode
I unplug phone power on i see sony ericsson and reboot again Sony Ericsson and reboot..... all the time WTF?
I think i see problem.... i have NEO (just) MT15i and soft is for Neo V its can be it?
Click to expand...
Click to collapse
Yeah thats possible, its for neo v !!
To others why you say that neo is better, and why is it crash all the time if you try this if it is for neo v.
These are the right steps, so more simpler then this i cant make, i do these steps and get never an error, some doing some wrong things
Ok i instal this M15 3.0.A.2.181 and phon is again onlinei try from this ver of FW root and instal 2.3.4 but i have maybe stupid question.... i have clean soft before when i want to instal somthink i enter xplore and find *.app to instal now i havent any file menager.... there is enny way to put somewhere app file to phon will see it without instalin file explorer....
Kuter_tm said:
Ok i instal this M15 3.0.A.2.181 and phon is again onlinei try from this ver of FW root and instal 2.3.4 but i have maybe stupid question.... i have clean soft before when i want to instal somthink i enter xplore and find *.app to instal now i havent any file menager.... there is enny way to put somewhere app file to phon will see it without instalin file explorer....
Click to expand...
Click to collapse
Huh? I cant ubderstand you? Which file xplorer do you need, on your phone or pc?
Sent from my MT11i using XDA Premium App
hehe i think that u dont understand me.... hmmm
where on SD card i can place app file and be able to install it... i have clear soft and i havent any file explorer from market etc
Kuter_tm said:
hehe i think that u dont understand me.... hmmm
where on SD card i can place app file and be able to install it... i have clear soft and i havent any file explorer from market etc
Click to expand...
Click to collapse
You need file explorer anyway for explore this app in sdcard...
And no matter where you put this file...without any file explorer you cant install it.
Kuter_tm said:
hehe i think that u dont understand me.... hmmm
where on SD card i can place app file and be able to install it... i have clear soft and i havent any file explorer from market etc
Click to expand...
Click to collapse
Put your sd in your phone, get connect with your pgone with the pc put the file in a new map with name what you want and put it there and enter cwm and flash the zipfile where you putting it in the map, just follow the steps And are you rooted ane have cwm?
Im going to sleep now, good night everyone !!
Again fail.....
I try to rot by this method http://forum.xda-developers.com/showthread.php?t=1133339
and i try fix batery 0%... and nothink i flash again and batery still 0%
Thanks for this, but is there a way to do this by unlocking the bootloader?
I have already tried unlocking the bootloader physically using the test point, but it didn't work - still says the BL is locked.
I have tried your way, and it works! But I want to install a custom ROM on my Xperia Neo, and every time I install a custom ROM using the CW-Install, it gets hung during boot up.
I should never have switched from HTC...
i start fight again... all night i charge phone and batery is still dead.... now im try to unroot by superoneclick and reflash soft using .042 now phone is booting....
and my baterry is still 0% any ideal why and how i can fix it ? hmmm i try install .062 maybe it help me i havent more ideas
Kuter_tm said:
i start fight again... all night i charge phone and batery is still dead.... now im try to unroot by superoneclick and reflash soft using .042 now phone is booting....
and my baterry is still 0% any ideal why and how i can fix it ? hmmm i try install .062 maybe it help me i havent more ideas
Click to expand...
Click to collapse
Which phone do you have main, this is for neo v, its so simple just follow the steps correctly and its done, not so hard to understand. Damn!
I have NEO and just NEo mt15i and im FIX it phone havent 0% of battery i use this GUIDE
http://forum.xda-developers.com/showthread.php?t=1312398
and work fine for me EXACLY this part
1. Read the full post, especially the FAQ. In case of doubt, you can use this guide to know how to do things:
http://forum.xda-developers.com/show....php?t=1133650
2. Unlock booloader
http://forum.xda-developers.com/show....php?t=1034087
3. Grab the most recent kernel patch from this thread. The file is boot.img.xxx.7z for your phone (ARC / NEO). We call this the kernel patch, or only the patch.
4. You must be same firmware and patch version, so if you aren't firmware xxx, use flashtools to flash the correct firmware. and wipe the data if downgrading firmware version. You can find some recent stock firmwares in the [Firmwares (.FTF)] section.
http://forum.xda-developers.com/show....php?t=1304634
5. Use fastboot to flash boot.img contained in file boot.img.xxx.arc.7z (or boot.img.xxx.neo.7z for NEO users). Flash the .img file, not the .7z file .
http://forum.xda-developers.com/show....php?t=1116970
6. Now you have a phone showing allways 85% battery capacity
7. Install most recent FuelGaugeFixV??.apk from this thread (Bazoocaze version).
8. For the first time, make sure the charger is plugged, and select "Start full charge" from the apk fix menu (use the menu button to show options). A full charge takes 3h00 ~ 3h40.
9. Now you have a fully charged phone, and apk fix updates battery % acordingly to phone usage.
10. See "Kernel issues" and "APK issues".
11. Press the tanks button on this thread, and optionally feel free to buy me some gift/beer/pizza/coffe.
http://forum.xda-developers.com/dona....php?u=4215483
12. Finish
From end of post im download boot.img.4.0.2.A.0.42.neo.7z cos i have soft 0.42 instal it by fast boot and work for me then install charger monitor and for now phone is charging to full
Hi XDA.
I've been searching and searching for the answer on XDA and other websites and can't quite find the answer i need.
I'm on GB 2.3.4.42 with root and CWM Recovery installed (with a few backups made on the SD Card with a locked bl)
I have checked my phone and I have a locked bootloader which cannot be unlocked (as far as i know?) And I was wondering if it is possible that flashing the stock ICS would work even if my bootloader is locked?
If I could also have a little help on how I would do this that would be fantastic.
Thank you again for taking your time to help me out. Such a noob lol.
Edit:
Added log when I try to flash:
08/054/2012 11:54:26 - INFO - <- This level is successfully initialized
08/054/2012 11:54:26 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
08/054/2012 11:54:26 - INFO - You can drag and drop ftf files here to start flashing them
08/054/2012 11:54:34 - INFO - Device connected with USB debugging on
08/054/2012 11:54:34 - INFO - Connected device : MT15
08/054/2012 11:54:34 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
08/054/2012 11:54:34 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf / Build number : 4.0.2.A.0.42
08/054/2012 11:54:35 - INFO - Root Access Allowed
08/055/2012 11:55:49 - INFO - Selected MT15_4.1.B.0.431_Global.ftf
08/055/2012 11:55:49 - INFO - Preparing files for flashing
08/055/2012 11:55:53 - INFO - Please connect your device into flashmode.
08/056/2012 11:56:01 - INFO - Device disconnected
08/056/2012 11:56:36 - INFO - Device connected in flash mode
08/056/2012 11:56:36 - INFO - Opening device for R/W
08/056/2012 11:56:37 - INFO - Start Flashing
08/056/2012 11:56:37 - INFO - Processing loader
08/056/2012 11:56:37 - INFO - Checking header
08/056/2012 11:56:37 - INFO - Ending flash session
08/056/2012 11:56:37 - ERROR -
08/056/2012 11:56:37 - ERROR - Error flashing. Aborted
08/056/2012 11:56:37 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Take care guys and thanks a lot for your help.
Laurie
Try with Sony Mobile Update Serivice before (normal update), full factory restore. Why using flashtool to update?
If with flashtool:
Try again, re download firmware .587 from THIS (why previous .431 if you are flashing?)full charge, disable antivirus or firewall.
Select all wipes, no excludes, check "no final verification".
Enable usb debug on the phone and then shut it off. Connect it (when power off connect it while long pressing "back button") to the pc following flashtool points.
BTW are you really saying that you couldn't find any answer to "Can I update to ICS still I am with locked bootloader?" Maybe you didn't search too much, beacuse it is quite known by all that locked bootloader means that you can flash only original signed Sony firmware.
In fact you had not to worry about bootloader, if you didn't know anything about it and you didn't touch it :good:
So, in final, do you know what are you doing, before messing up something?
http://forum.xda-developers.com/showthread.php?t=1973017 hope it helps
Just use seus..just follow the step..
Sent from my Xperia Neo V using xda app-developers app
Bertellio said:
Try with Sony Mobile Update Serivice before (normal update), full factory restore. Why using flashtool to update?
If with flashtool:
Try again, re download firmware .587 from THIS (why previous .431 if you are flashing?)full charge, disable antivirus or firewall.
Select all wipes, no excludes, check "no final verification".
Enable usb debug on the phone and then shut it off. Connect it (when power off connect it while long pressing "back button") to the pc following flashtool points.
BTW are you really saying that you couldn't find any answer to "Can I update to ICS still I am with locked bootloader?" Maybe you didn't search too much, beacuse it is quite known by all that locked bootloader means that you can flash only original signed Sony firmware.
In fact you had not to worry about bootloader, if you didn't know anything about it and you didn't touch it :good:
So, in final, do you know what are you doing, before messing up something?
Click to expand...
Click to collapse
Thanks for your help so far guys, I do know what I'm doing generally but when I go to flash now i've encountered another problem:
When I put debug on, put it into msc and then reboot the phone ready for flash I get this error and the whole thing aborts. This happens with Sony Companion (when I tried the .62 update) and SUS - which meant i couldn't get past the 3rd page :C
Any idea what the problem is?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does this happen with other usb devices..or only with the phone???
If it happens with all devices..then restart pc..happened to me once..restarting solved it..
If its only with the phone..then reinstall ADB DRIVERS.. Goto Flashtool >drivers and click on Flashtool-drivers.exe
Just try again It will work
LoneWanderer said:
Does this happen with other usb devices..or only with the phone???
If it happens with all devices..then restart pc..happened to me once..restarting solved it..
If its only with the phone..then reinstall ADB DRIVERS.. Goto Flashtool >drivers and click on Flashtool-drivers.exe
Click to expand...
Click to collapse
Apreicate your help.
When I go to reinstall the Drivers I forgot to mention this and didn't really think anything of it, I get this error:
The phone also doesn't appear in my driver manager either =/
The error I get:
Also showing my phone connected to my pc:
I have absolutely no clue where to go from here :c
+Xperia > Connect > MSC
+Developer Options > USB Debugging on
+Security > Unknown Resources
+Install Drivers : Flashmode // ADB Neo drivers
+Make Sony PC Companion recognize your phone.After it recognizes..close it.
+If your system is 32 bit , open flashtool.exe if it is 64 bit , open flashtool64.exe .
+Sometimes windows install drivers for your phone.Wait until it finish.
+And don't forget.Don't open Flashtool - doom or other root / boot stuffs together.ADB servers will be out of date.So just open flashtool.
+If you have a antivurs, close it.
+If there is another program which can delete files automatically..you should close it too!
+Be fast when you are trying to make phone enter flashmode.Don't wait much.
+When you try to install drivers, installer will open.And it will ask you for your permission.Just accept all of them.
Don't forget wipe data / cache..and be sure that .ftf is right.
I hope you will make it
Is that Windows8??....then the best option would be to use a Win7 pc..but if u dont have one rite now..
In your device manager..goto Sony saXXXX..update ADB interface driver software..if that doesnt work then..
uninstall driver..disconnect usb..unselect USB debuggin..reselect it and plug in the usb..let windows install drivers..
Thanks so much guys for your help!
I've just changed from the USB2.0 port to a 3.0 and the S1Boot driver suddenly installed and now flashing! I'll edit this when its finished flashing!
BRB.
EDIT 1:
It's been stuck at this for 5 mins now: should I be worried?
08/023/2012 16:23:38 - INFO - <- This level is successfully initialized
08/023/2012 16:23:39 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
08/023/2012 16:23:39 - INFO - You can drag and drop ftf files here to start flashing them
08/023/2012 16:23:46 - INFO - Device disconnected
08/024/2012 16:24:04 - INFO - Selected MT15_4.1.B.0.431_Global.ftf
08/024/2012 16:24:04 - INFO - Preparing files for flashing
08/024/2012 16:24:08 - INFO - Please connect your device into flashmode.
08/024/2012 16:24:28 - INFO - Flash canceled
08/025/2012 16:25:04 - INFO - Device connected with USB debugging on
08/025/2012 16:25:05 - INFO - Connected device : MT15
08/025/2012 16:25:06 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
08/025/2012 16:25:06 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf / Build number : 4.0.2.A.0.42
08/025/2012 16:25:07 - INFO - Root Access Allowed
08/025/2012 16:25:18 - INFO - Selected MT15i_4.1.B.0.587_Global.ftf
08/025/2012 16:25:18 - INFO - Preparing files for flashing
08/025/2012 16:25:26 - INFO - Please connect your device into flashmode.
08/025/2012 16:25:30 - INFO - Device disconnected
08/025/2012 16:25:41 - INFO - Device connected in flash mode
08/025/2012 16:25:41 - INFO - Opening device for R/W
08/025/2012 16:25:42 - INFO - Reading device information
08/025/2012 16:25:42 - INFO - Phone ready for flashmode operations.
08/025/2012 16:25:42 - INFO - Start Flashing
08/025/2012 16:25:42 - INFO - Processing loader
08/025/2012 16:25:42 - INFO - Checking header
08/025/2012 16:25:42 - INFO - Flashing data
08/025/2012 16:25:44 - INFO - Loader : S1_Loader_Root_773f - Version : R4A069 / Bootloader status : NOT_ROOTABLE
08/025/2012 16:25:44 - INFO - Disabling final data verification check
08/025/2012 16:25:44 - INFO - Processing kernel.sin
08/025/2012 16:25:44 - INFO - Checking header
08/025/2012 16:25:44 - INFO - Flashing data
08/025/2012 16:25:46 - INFO - Processing fota1.sin
08/025/2012 16:25:46 - INFO - Checking header
08/025/2012 16:25:46 - INFO - Flashing data
08/025/2012 16:25:47 - INFO - Processing fota0.sin
08/025/2012 16:25:47 - INFO - Checking header
08/025/2012 16:25:47 - INFO - Flashing data
08/025/2012 16:25:48 - INFO - Processing adsp.sin
08/025/2012 16:25:48 - INFO - Checking header
08/025/2012 16:25:48 - INFO - Flashing data
08/025/2012 16:25:51 - INFO - Processing amss_fs_hallon.sin
08/025/2012 16:25:51 - INFO - Checking header
08/025/2012 16:25:51 - INFO - Flashing data
08/025/2012 16:25:51 - INFO - Processing amss.sin
08/025/2012 16:25:51 - INFO - Checking header
08/025/2012 16:25:51 - INFO - Flashing data
08/025/2012 16:25:58 - INFO - Processing vendor.sin
08/025/2012 16:25:58 - INFO - Checking header
08/025/2012 16:25:58 - INFO - Flashing data
08/026/2012 16:26:27 - INFO - Ending flash session
Click to expand...
Click to collapse
hmm..it should say flashing finished almost instantaneously..at this point..
Did u follow the steps mentioned in my guide perfectly??? wipe data, cache, apps log before flashing??
If you look at the middle you Will see "not rootable", so probably you've done something wrong.
Why did you use S1 driver?
Anyway uninstall flashtool, then open update service and follow it to the end. This should make you connect the phone in flashmode and the driver Will be installed automatically if connected to the net.
...and you Will install ics.
Again use flashtool only if Update Service is not helping you in order to get what you want.
Sent from my MT15i using xda app-developers app
SOLVED!
LoneWanderer said:
hmm..it should say flashing finished almost instantaneously..at this point..
Did u follow the steps mentioned in my guide perfectly??? wipe data, cache, apps log before flashing??
Click to expand...
Click to collapse
Sorry I couldn't reply sooner, been busy.
Anyways, I stopped the flash while it was in progress which "bricked" it. So I used SEUS to restore it and then used your instructions to reflash it again. Worked flawlessly the second time! Thank you so much everyone for your help! :good:
Hey,
i reflashed the Firmware using Seus.
After Seus finished, it says to reboot, so i did.
But it doesnt Boot up, there is a black screen with a bit of light, then it is really black and then its again a black screen with light. Looks like a bootloop.
What can i do?
Jan
theKingJan said:
Hey,
i reflashed the Firmware using Seus.
After Seus finished, it says to reboot, so i did.
But it doesnt Boot up, there is a black screen with a bit of light, then it is really black and then its again a black screen with light. Looks like a bootloop.
What can i do?
Jan
Click to expand...
Click to collapse
Before reflashed with SEUS, did you unlock bootloader? (this should not be a problem)
Before reflashed with SEUS, did you flash custom kernel? (this should not be a problem)
Before reflashed with SEUS, did you lock bootloader still with a custom kernel? (this is a problem)
Else
Try to remove the SD-card and the turn on the phone without SD-card.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If it still do not boot up. Try boot with charger plugged in.
If it still do not boot up. Try to reflash again.
No i did nothing, its was full stock with locked bootloaders...
The SD-Card is not insert...
It doesnt boot up while the charger is plugged in, but it installs the driver...
I reflashed...
Nothing works
Its not my phone, my friend had many problems:
-slow
-it only boot sometimes
-the notification bar was sometimes in the middle of the screen, and everything was postponed...
theKingJan said:
It doesnt boot up while the charger is plugged in, but it installs the driver...
Click to expand...
Click to collapse
Try wallplug, not PC
EDIT: I had this problem too once. Solved it by changing battery (my wife got same phone).
My battery worked well in my wifes phone.
I think it's related to ballery stats
With onother full battery of the same type it doesnt work either...
Download this file last X10mini pro Firmware and flash it via flash tool
Rempty said:
Download this file last X10mini pro Firmware and flash it via flash tool
Click to expand...
Click to collapse
I did, still the same thing :
there is a black screen with a bit of light, then it is really black and then its again a black screen with light.
Heres the log:
25/051/2013 18:51:10 - INFO - <- This level is successfully initialized
25/051/2013 18:51:10 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
25/051/2013 18:51:10 - INFO - You can drag and drop ftf files here to start flashing them
25/051/2013 18:51:15 - INFO - Device disconnected
25/051/2013 18:51:18 - INFO - Selected Full_SYS___KernelU20i-mini_pro_update_1.0_2.1.1.C.0.0.ftf
25/051/2013 18:51:18 - INFO - Preparing files for flashing
25/051/2013 18:51:19 - INFO - Please connect your device into flashmode.
25/051/2013 18:51:32 - INFO - Device connected in flash mode
25/051/2013 18:51:32 - INFO - Opening device for R/W
25/051/2013 18:51:32 - INFO - Reading device information
25/051/2013 18:51:32 - INFO - Phone ready for flashmode operations.
25/051/2013 18:51:32 - INFO - Current device : U20i - CB511L9232 - 1238-7168_R5B - 1235-3411_2.1.1.C.0.0 - WORLD-1-8_2.1.1.C.0.0
25/051/2013 18:51:32 - INFO - Start Flashing
25/051/2013 18:51:32 - INFO - Processing loader
25/051/2013 18:51:32 - INFO - Checking header
25/051/2013 18:51:32 - INFO - Flashing data
25/051/2013 18:51:33 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
25/051/2013 18:51:33 - INFO - Processing kernel.sin
25/051/2013 18:51:33 - INFO - Checking header
25/051/2013 18:51:33 - INFO - Flashing data
25/051/2013 18:51:37 - INFO - Processing fota1.sin
25/051/2013 18:51:37 - INFO - Checking header
25/051/2013 18:51:37 - INFO - Flashing data
25/051/2013 18:51:37 - INFO - Processing fota0.sin
25/051/2013 18:51:37 - INFO - Checking header
25/051/2013 18:51:37 - INFO - Flashing data
25/051/2013 18:51:38 - INFO - Processing amss_fs.sin
25/051/2013 18:51:38 - INFO - Checking header
25/051/2013 18:51:38 - INFO - Flashing data
25/051/2013 18:51:38 - INFO - Processing amss.sin
25/051/2013 18:51:38 - INFO - Checking header
25/051/2013 18:51:38 - INFO - Flashing data
25/051/2013 18:51:49 - INFO - Processing system.sin
25/051/2013 18:51:49 - INFO - Checking header
25/051/2013 18:51:49 - INFO - Flashing data
25/053/2013 18:53:39 - INFO - Processing userdata.sin
25/053/2013 18:53:39 - INFO - Checking header
25/053/2013 18:53:39 - INFO - Flashing data
25/053/2013 18:53:43 - INFO - Processing cache.sin
25/053/2013 18:53:43 - INFO - Checking header
25/053/2013 18:53:43 - INFO - Flashing data
25/053/2013 18:53:43 - INFO - Ending flash session
25/053/2013 18:53:43 - INFO - Flashing finished.
25/053/2013 18:53:43 - INFO - Please unplug and start your phone
25/053/2013 18:53:43 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
25/053/2013 18:53:43 - INFO - Device connected in flash mode
25/054/2013 18:54:04 - INFO - Device disconnected
Just pull out battery for 3 minutes.
then plug charger & if you See Sony LOGO press the power button to bootup (1minute after charging)
If you can't see Sony logo so just flash the stock frimware again & you'll be fine:thumbup:
#p.s search in the net for pulling out x10 's battery,u must disconnect a black cable near battery using a screwdriver
sent via ULTIMATE GB beta
I pulled out the battery the normal way.... I dindmt found the cable...
But there is still the black screen and no sony logo. And i reflashed two times the stock firmware.
theKingJan said:
I pulled out the battery the normal way.... I dindmt found the cable...
But there is still the black screen and no sony logo. And i reflashed two times the stock firmware.
Click to expand...
Click to collapse
Sounds like a hardward fault, since you also said the notifications were sometimes in the middle of the screen, I would think the flex is damaged ( the ribbon cable that connects the phone/keyboard part to the screen ), replacing that may solve your problems.
Okay, but what have this connector to do with the booting?
Is there any Service Manual from the x10 mini pro?
This Flex:
http://www.ebay.de/itm/Original-Fle...ria-X10-Mini-Pro-/110882980860#ht_1752wt_1163
or
http://www.nortonline.gr/nortonline..._cable_sony_ericsson_xperia_x10_mini_pro.html
there are so many..
Tech docs for Xperia X10 Mini / Pro
I got all the tech docs for X10 mini/pro here:
https://www.box.com/XperiaX10mini-pro-tech-docs
Thank you but where is this connector placed`?
Upper or lower unit?
theKingJan said:
Thank you but where is this connector placed`?
Upper or lower unit?
Click to expand...
Click to collapse
not a clue
did you try to flash cwm? can you boot to cwm?
if you can try at clear battery stats
How can i flash CWM with the Flashtool?
Edit:
I need root, or not...
It seems from the log that your bootloader can not be unlocked. You are in a bricked state. Try to google out the solution.
Sent from my X10MiniPro using xda premium
Hello
At First I want to say Sorry For my poor English.
ok , I've Bricked my Xperia Neo V After flashed the Zelly Cream Rom V2 by GaGan, so at first my Phone was bootlopping (Sony logo , than bootscreen, then SOny logo again ) and now it stuck at Sony logo and can't let me Enter CWM or even Turn OFF this H%#&@(#. so sudenly the Sony logo disapper and the screen turns black . and when i press the Turn On button the led light flashes Red like i've got no battery , but when i try to charge my phone no battery charging info appears
I've tried FlashTool But when it says that i've to connet my phone holding the back button , nothing happens , sometimes after connected for some seconds the green light flashes and the sony logo appears but after some minutes all go down .
so here comes the FLASHTOOL LOG.!:
27/003/2013 08:03:26 - INFO - <- This level is successfully initialized
27/003/2013 08:03:26 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/003/2013 08:03:26 - INFO - You can drag and drop ftf files here to start flashing them
27/003/2013 08:03:35 - INFO - Device disconnected
27/003/2013 08:03:56 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/003/2013 08:03:56 - INFO - Preparing files for flashing
27/004/2013 08:04:42 - INFO - Please connect your device into flashmode.
27/006/2013 08:06:51 - INFO - Device connected in flash mode
27/006/2013 08:06:52 - INFO - Opening device for R/W
27/006/2013 08:06:54 - INFO - Start Flashing
27/006/2013 08:06:54 - INFO - Processing loader
27/006/2013 08:06:54 - INFO - Checking header
27/006/2013 08:06:54 - INFO - Ending flash session
27/006/2013 08:06:54 - ERROR -
27/006/2013 08:06:54 - ERROR - Error flashing. Aborted
27/006/2013 08:06:56 - INFO - Device connected in flash mode
27/007/2013 08:07:14 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/007/2013 08:07:14 - INFO - Preparing files for flashing
27/007/2013 08:07:37 - INFO - Device disconnected
Please someone Help Me !!!!
Re: [Q] Bricked Neo V , can't enter flash mode
You need to charge the device from wall charger,not from your PC..
Anyway,charge it first...
Sent from my Xperia Neo V
megatpanji said:
You need to charge the device from wall charger,not from your PC..
Anyway,charge it first...
Sent from my Xperia Neo V
Click to expand...
Click to collapse
i've tried all night , when i connected my charger to the phone there's no sign of battery chargin.
i'll try again and see what's happen^^
megatpanji said:
You need to charge the device from wall charger,not from your PC..
Anyway,charge it first...
Sent from my Xperia Neo V
Click to expand...
Click to collapse
Man now the Led turn Blue but when i try to flash this happen:
27/023/2013 09:23:15 - INFO - <- This level is successfully initialized
27/023/2013 09:23:15 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/023/2013 09:23:15 - INFO - You can drag and drop ftf files here to start flashing them
27/023/2013 09:23:21 - INFO - Device connected in flash mode
27/023/2013 09:23:22 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/023/2013 09:23:22 - INFO - Preparing files for flashing
27/023/2013 09:23:28 - INFO - Device disconnected
27/024/2013 09:24:05 - INFO - Please connect your device into flashmode.
27/024/2013 09:24:22 - ERROR - Drivers need to be installed for connected device.
27/024/2013 09:24:22 - ERROR - You can find them in the drivers folder of Flashtool.
27/024/2013 09:24:23 - INFO - Flash canceled
lexrios said:
Man now the Led turn Blue but when i try to flash this happen:
27/023/2013 09:23:15 - INFO - <- This level is successfully initialized
27/023/2013 09:23:15 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/023/2013 09:23:15 - INFO - You can drag and drop ftf files here to start flashing them
27/023/2013 09:23:21 - INFO - Device connected in flash mode
27/023/2013 09:23:22 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/023/2013 09:23:22 - INFO - Preparing files for flashing
27/023/2013 09:23:28 - INFO - Device disconnected
27/024/2013 09:24:05 - INFO - Please connect your device into flashmode.
27/024/2013 09:24:22 - ERROR - Drivers need to be installed for connected device.
27/024/2013 09:24:22 - ERROR - You can find them in the drivers folder of Flashtool.
27/024/2013 09:24:23 - INFO - Flash canceled
Click to expand...
Click to collapse
WTF man ? It clearly stated that you need proper driver which can just found in your flashtool dir ( C:flashtool/driver) and install it ! Just tick your neo V
Saingpor said:
WTF man ? It clearly stated that you need proper driver which can just found in your flashtool dir ( C:flashtool/driver) and install it ! Just tick your neo V
Click to expand...
Click to collapse
MAn i've installed the drives for Neo, arc and etc , cos' in Flash Tools There's no Drive for Neo V . but still got the same message,
i've installed all the drives on the Pack to see whats happen and the same error Ocur .
lexrios said:
MAn i've installed the drives for Neo, arc and etc , cos' in Flash Tools There's no Drive for Neo V . but still got the same message,
i've installed all the drives on the Pack to see whats happen and the same error Ocur .
Click to expand...
Click to collapse
Have you tried this :angel:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Plz just remove/uninstall your flashtool and also all the drivers you install and restart ur pc !
Now install flashtool and the above mentioned drivers
And then your neo V will not flashable Just kidding man ! Plz don't hate me
Saingpor said:
Have you tried this :angel:
Plz just remove/uninstall your flashtool and also all the drivers you install and restart ur pc !
Now install flashtool and the above mentioned drivers
And then your neo V will not flashable Just kidding man ! Plz don't hate me
Click to expand...
Click to collapse
sadly it does'nt work ... i've uninstalled the flashtools , rebooted the PC , then reinstalled FlashTool , ticked the Flash mode , and Fast boot mode drives but
and when asked i've hold the Menu key and plugged the phone , the led turns blu but the same message appears:
27/004/2013 10:04:47 - INFO - <- This level is successfully initialized
27/004/2013 10:04:47 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/004/2013 10:04:47 - INFO - You can drag and drop ftf files here to start flashing them
27/004/2013 10:04:56 - INFO - Device disconnected
27/005/2013 10:05:34 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/005/2013 10:05:34 - INFO - Preparing files for flashing
27/007/2013 10:07:35 - INFO - Please connect your device into flashmode.
27/007/2013 10:07:49 - ERROR - Drivers need to be installed for connected device.
27/007/2013 10:07:49 - ERROR - You can find them in the drivers folder of Flashtool.
27/008/2013 10:08:00 - INFO - Flash canceled
EDIT: I Found the error , I'm holding menu button , I"ve to hold de Back button ¬¬
You must hold the BACK button not the menu button!!!
lexrios said:
sadly it does'nt work ... i've uninstalled the flashtools , rebooted the PC , then reinstalled FlashTool , ticked the Flash mode , and Fast boot mode drives but
and when asked i've hold the Menu key and plugged the phone , the led turns blu but the same message appears:
27/004/2013 10:04:47 - INFO - <- This level is successfully initialized
27/004/2013 10:04:47 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/004/2013 10:04:47 - INFO - You can drag and drop ftf files here to start flashing them
27/004/2013 10:04:56 - INFO - Device disconnected
27/005/2013 10:05:34 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/005/2013 10:05:34 - INFO - Preparing files for flashing
27/007/2013 10:07:35 - INFO - Please connect your device into flashmode.
27/007/2013 10:07:49 - ERROR - Drivers need to be installed for connected device.
27/007/2013 10:07:49 - ERROR - You can find them in the drivers folder of Flashtool.
27/008/2013 10:08:00 - INFO - Flash canceled
EDIT: I Found the error , I'm holding menu button , I"ve to hold de Back button ¬¬
Click to expand...
Click to collapse
Myke72 said:
You must hold the BACK button not the menu button!!!
Click to expand...
Click to collapse
Do what as Myke told you ! You must hold back button in order to get into flashmode while connect with PC !
The blue led mean Bootloader/fastboot mode
Oh god .......
Man Saingpor !!! You saved My Life !!!!! THANKS THANKS THANKS AND THANKS AGAIN!!!!
lexrios said:
Man Saingpor !!! You saved My Life !!!!! THANKS THANKS THANKS AND THANKS AGAIN!!!!
Click to expand...
Click to collapse
So now plz edit your thread as [SOLVED] ! So other peep will know your problem is solved
Another thank would be aprreciated lol :highfive::laugh::angel::fingers-crossed:
So I've been working on trying to get my phone rooted for a while and finally got it working after a few threads and trial and error so i thought i'd share my findings.
So to root your E2306 (Xperia m4 aqua) you will need:
Stock rom: https://userscloud.com/vaqpt1y0xdnu
Rootkit: https://www.dropbox.com/s/edse0h6b02odzn1/rootkitXperia_E23xx.zip?dl=0
Adb: https://drive.google.com/open?id=0B0MKgCbUM0itNVB1elljU2NPR0k
Flashtool: http://www.flashtool.net/downloads.php
And Finally Twrp installer (If you want a custom bootloader): https://www.dropbox.com/s/yomdwq3p2le9hvi/M4Aqua-lockedTWRP-0.1-installer.zip?dl=0
1. Go download all of the items listed.
2. Install ADB using Installer.
3. Install Flashtool.
4. Run flashtool and click devices then check drivers and make sure your phone shows up.
5. You will need to install phone drivers using flashtool, go to C:\Flashtool\drivers and run Flashtool-drivers.exe
6. Check "Flashmode Drivers" and "Fastboot Drivers" then click install. If a red warning or something shows up saying drivers not safe click install anyway.
7. Now check drivers again and your device should show up.
8. Next copy E2306_26.1.A.1.112_Latin America Generic[WwW.SonyROMS.iR].FTF to C:\Users\(YourUsername)\.flashTool\firmwares
9. Now go to flashtool and click the lightning strike called "Flash Device".
10. Chose "Flashmode" and click "OK".
11. Setup as shown and click flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(APPS_LOG and USERDATA)
12. The log will say preparing files for a bit then a window will open up saying to turn off device and plug it back in. Turn off your phone then hold the volume down while plugging the micro usb back in.
13. The LED will go green showing that its in flashmode, the device should then flash the new rom.
14. Once done disconnect usb and reboot, the boot may take a while 5-10 min.
15. Once booted go to Settings -> About Phone -> then click the build number until you unlock developer mode.
16. Go into developer options and enable "USB Debugging".
17. Plug the phone back in and extract "rootkitXperia_E23xx".
18. Now Copy "files", "src" and "install.bat" into C:\adb.
19. Run install.bat as normal (Not admin) and a box will pop up on your phone asking to trust pc. Do trust pc and let the install.bat continue.
20. The install will say invalid socket, rebooting to avoid crash. Let the phone reboot while staying connected to pc.
21. The phone should boot and the install will finish.
22. You should now have root.
Guide for Custom Recovery (DO ROOT FIRST)
1. Remove "files", "src" and "install.bat" from the ADB folder.
2. Copy the "files", "src" and "install.bat from "M4Aqua-lockedTWRP-0.1-installer" into C:\adb
3. Run install.bat and it will ask for root on phone, grant it root and it should install.
4. To boot into recovery shut down phone and power it on. The phone will show a blue LED at the sony logo. Click volume down and it will show a Purple LED and boot into TWRP.
Warning: DO NOT REBOOT INTO RECOVERY USING "Reboot into recovery/ Reboot Recovery" IT DON'T WORK.
Where I found my in formation if you want to read more.
TWRP: http://forum.xda-developers.com/m4-aqua/development/bl-locked-twrp-touch-recovery-bl-locked-t3257430
RootKit method: http://forum.xda-developers.com/m4-aqua/general/root-xperia-m4-locked-bootloader-models-t3257326
Stock E2306 rom: http://forum.xda-developers.com/m4-aqua/general/stock-xperia-m4-aqua-xperia-m4-aqua-dual-t3141061
ADB installer: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Old stock roms for other m4's: http://forum.xda-developers.com/m4-aqua/general/stock-xperia-m4-aqua-xperia-m4-aqua-dual-t3141061
Hope I helped! :laugh: :good:
There are lots of different flash tools available in Google...can you give a link for flashtool too....plzz
Bro finally!!!! Rooted my phone...
But device is not getting updated..!!
Could not verify??
saitejadsst said:
There are lots of different flash tools available in Google...can you give a link for flashtool too....plzz
Click to expand...
Click to collapse
http://www.flashtool.net/downloads_windows.php
saitejadsst said:
Could not verify??
Click to expand...
Click to collapse
Just use a app like "Root uninstaller " to uninstall "software Update"
saitejadsst said:
Bro finally!!!! Rooted my phone...
But device is not getting updated..!!
Click to expand...
Click to collapse
The root disables updates. If you update it removes root.
boho555 said:
The root disables updates. If you update it removes root.
Click to expand...
Click to collapse
But I downgraded from E2363 to E2333 can't I get back???
Those are two different models of phone. If you are rooting a E2363 then you need a Rom for that. Check your about phone. Does it say what model you have?
I used to have E2363 but I downgraded to E2333 and rooted using roottoolkit
That's the actual phone model? There's a piece of paper in the sdcard spot. Pull it out and look for the model number there.
the image is not showing in the tutorial
Thanks mate!
Everyone who has another type of M4 Aqua can do this too!
Just use an old firmware for your device (in my case E2303).
I used 26.A.2.128 and followed every step.
Thanks @boho555 !!! :good:
---------- Post added at 07:48 PM ---------- Previous post was at 07:39 PM ----------
waffledup said:
the image is not showing in the tutorial
Click to expand...
Click to collapse
Tick only the two(?) wipe options. Don't pick others or it will result in a bootloop.
will this worj with e2353?
---------- Post added at 03:54 AM ---------- Previous post was at 03:51 AM ----------
07/021/2016 11:21:36 - ERROR - Drivers need to be installed for connected device.
07/021/2016 11:21:36 - ERROR - You can find them in the drivers folder of Flashtool.
07/021/2016 11:21:42 - INFO - List of connected devices (Device Id) :
07/021/2016 11:21:42 - INFO - - USB\VID_0FCE&PID_51C4\YT9115XU1B Driver installed : true
07/021/2016 11:21:42 - INFO - - USB\VID_0FCE&PID_51C4&MI_00\7&38DC4217&0&0000 Driver installed : true
07/021/2016 11:21:42 - INFO - - USB\VID_0FCE&PID_51C4&MI_01\7&38DC4217&0&0001 Driver installed : false
07/021/2016 11:21:42 - INFO - List of ADB devices :
07/021/2016 11:21:42 - INFO - - none
07/021/2016 11:21:42 - INFO - List of fastboot devices :
07/021/2016 11:21:42 - INFO - - none
---------- Post added at 04:03 AM ---------- Previous post was at 03:54 AM ----------
this is after flashing:
07/032/2016 11:32:46 - INFO - Selected Bundle for Sony Xperia M2 (D2306). FW release : 26.1.A.1.112_R4A. Customization : Latin America Generic_1294-3902
07/032/2016 11:32:46 - INFO - Preparing files for flashing
07/033/2016 11:33:33 - INFO - Please connect your device into flashmode.
07/033/2016 11:33:36 - INFO - Device disconnected
07/034/2016 11:34:16 - INFO - Device connected in flash mode
07/034/2016 11:34:16 - INFO - Opening device for R/W
07/034/2016 11:34:17 - INFO - Reading device information
07/034/2016 11:34:17 - INFO - Phone ready for flashmode operations.
07/034/2016 11:34:17 - INFO - Current device : E2353 - YT9115XU1B - 1297-0366_R1A - 1296-0230_26.1.A.1.100 - GENERIC_26.1.A.1.100
07/034/2016 11:34:17 - INFO - Start Flashing
07/034/2016 11:34:17 - INFO - Processing loader.sin
07/034/2016 11:34:17 - INFO - Checking header
07/034/2016 11:34:17 - INFO - Flashing data
07/034/2016 11:34:17 - INFO - Processing of loader.sin finished.
07/034/2016 11:34:18 - INFO - Loader : S1_Root_54c8 - Version : MSM8936_14 / Boot version : S1_Boot_MSM8936_LA2.0_29 / Bootloader status : NOT_ROOTABLE
07/034/2016 11:34:18 - INFO - Processing partitions.sin
07/034/2016 11:34:18 - INFO - Checking header
07/034/2016 11:34:18 - INFO - Flashing data
07/034/2016 11:34:18 - ERROR - Processing of partitions.sin finished with errors.
07/034/2016 11:34:18 - INFO - Ending flash session
07/034/2016 11:34:18 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="801C003D";
weydz.tut said:
will this worj with e2353?
---------- Post added at 03:54 AM ---------- Previous post was at 03:51 AM ----------
07/021/2016 11:21:36 - ERROR - Drivers need to be installed for connected device.
07/021/2016 11:21:36 - ERROR - You can find them in the drivers folder of Flashtool.
07/021/2016 11:21:42 - INFO - List of connected devices (Device Id) :
07/021/2016 11:21:42 - INFO - - USB\VID_0FCE&PID_51C4\YT9115XU1B Driver installed : true
07/021/2016 11:21:42 - INFO - - USB\VID_0FCE&PID_51C4&MI_00\7&38DC4217&0&0000 Driver installed : true
07/021/2016 11:21:42 - INFO - - USB\VID_0FCE&PID_51C4&MI_01\7&38DC4217&0&0001 Driver installed : false
07/021/2016 11:21:42 - INFO - List of ADB devices :
07/021/2016 11:21:42 - INFO - - none
07/021/2016 11:21:42 - INFO - List of fastboot devices :
07/021/2016 11:21:42 - INFO - - none
---------- Post added at 04:03 AM ---------- Previous post was at 03:54 AM ----------
this is after flashing:
07/032/2016 11:32:46 - INFO - Selected Bundle for Sony Xperia M2 (D2306). FW release : 26.1.A.1.112_R4A. Customization : Latin America Generic_1294-3902
07/032/2016 11:32:46 - INFO - Preparing files for flashing
07/033/2016 11:33:33 - INFO - Please connect your device into flashmode.
07/033/2016 11:33:36 - INFO - Device disconnected
07/034/2016 11:34:16 - INFO - Device connected in flash mode
07/034/2016 11:34:16 - INFO - Opening device for R/W
07/034/2016 11:34:17 - INFO - Reading device information
07/034/2016 11:34:17 - INFO - Phone ready for flashmode operations.
07/034/2016 11:34:17 - INFO - Current device : E2353 - YT9115XU1B - 1297-0366_R1A - 1296-0230_26.1.A.1.100 - GENERIC_26.1.A.1.100
07/034/2016 11:34:17 - INFO - Start Flashing
07/034/2016 11:34:17 - INFO - Processing loader.sin
07/034/2016 11:34:17 - INFO - Checking header
07/034/2016 11:34:17 - INFO - Flashing data
07/034/2016 11:34:17 - INFO - Processing of loader.sin finished.
07/034/2016 11:34:18 - INFO - Loader : S1_Root_54c8 - Version : MSM8936_14 / Boot version : S1_Boot_MSM8936_LA2.0_29 / Bootloader status : NOT_ROOTABLE
07/034/2016 11:34:18 - INFO - Processing partitions.sin
07/034/2016 11:34:18 - INFO - Checking header
07/034/2016 11:34:18 - INFO - Flashing data
07/034/2016 11:34:18 - ERROR - Processing of partitions.sin finished with errors.
07/034/2016 11:34:18 - INFO - Ending flash session
07/034/2016 11:34:18 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="801C003D";
Click to expand...
Click to collapse
Try this firmware https://userscloud.com/p4m0v8k4czmf
Also "ERROR - Drivers need to be installed for connected device" this means you don't have the drivers installed. Check C:\Flashtool\drivers and run flashtool drivers.exe
Then choose "Flashmode" and "Fastboot" drivers then install.
boho555 said:
Also "ERROR - Drivers need to be installed for connected device" this means you don't have the drivers installed. Check C:\Flashtool\drivers and run flashtool drivers.exe
Then choose "Flashmode" and "Fastboot" drivers then install.
Click to expand...
Click to collapse
I did install drivers via that process and it was ok, but once phone was plugged in it was always in that error
weydz.tut said:
I did install drivers via that process and it was ok, but once phone was plugged in it was always in that error
Click to expand...
Click to collapse
Odd, did you try the other firmware?
boho555 said:
Odd, did you try the other firmware?
Click to expand...
Click to collapse
yeah i know not yet downloaded, experiencing slow connections
weydz.tut said:
yeah i know not yet downloaded, experiencing slow connections
Click to expand...
Click to collapse
Alright, the firmware your downloading is the only one that will work for your device. However that error seems driver related. Try installing drivers off your phone. (Settings->XperiaConectivity->UsbSettings then switch on "Install software". Then plug the phone in and check the notification bar for a notification to install software.)
Firmware link?
I've been tring to get this to work on my E2306 with no joy for several days now. I'm getting bootloops after flashing the firmware from original post.
I have also downloaded it from two other sources and would always get to the same result.
By the way, it would show in Flashtool when you select the file as being buit for the D2306 (not E2306) !!
So would anyone have another link for the firmware *A.1.112 for E2306 ???