2 Din Car DVD Stereo GPS+ CD Player +MP3 +Bluetooth +Ipod +WiFi+ 3G+7 inch Android 4.0 Tablet Car PC Media
The Pad was delivered rooted, and that was just great, so i did some modifications, such as installing Chainfires SU, Link to sd, Online nandroid and a few more goodies that a rooted android needs.
Now....here is what wend wrong, checked out the busybox installed on the pad and it was version 1.8.3 and wend in and installed busybox manager and could see that there was an update for the busybox to version 1.20.2 if i remember correctly, so i updated and everything wend smoothly, until i rebooted the pad...suddenly everything was changed, i had to calibrate the pad and so on...basically it had lost the whole configuration.
Then i wend in and checked storage!! the internal storage was now in 0.00 mb left....meaning, even when going in and wanting to re install something, there is no space, and every time i reboot i have to redo the whole thing cause it cannot keep the settings.
It runs a 3e recovery. there is a wipe/reset but it will not let me get down to the "yes wipe/reset" i can only choose the NO.
I would appreciate it, if anyone has any knowledge to this and how i can get it back to the original state.
the issue came when updating the busybox.
Facts about the PAD/OS
Android: ICS 4.0.4 rooted
Hardware Pad
CPU:Telechips TCC8803,1.0GHz; Cortex-A8 Kernel, 45nm processing.
RAM: DDR III 512M
ROM FLASH:4GB
Power IC:TDA 7388/LA47002/TA2929/TA2939
Extended memory card:Up to 32GB SD/TF card
WiFi:Bulit-in High performance, low power consumption, Atheros 6302 WiFi802.11b/g/n.
3G:3G Universal Drive ---Support extral USB Dongle:WCDMA,EVDO,TD-SCDMA GPS,JRC G591Receiving Module
G-SENSOR:3 axis acceleration sensor and 3D IC hardware acceleration,could realize dynamic 3D game and 3D interface.
CAMERA: support 0.3-2 Megapixels rear camera
Speaker:built-in speaker,1pc 1W,8Ohm
Micphone:built-in, high sensitivity input, right&left channel
Indicator light:built-in red charging indicator light,built-in vibration motor
Hardware CarAudio System
Operation System DVD platform
CPU:Toshiba TMP86FS49UG
Display:Supplier:Innolux
LCD:7 inch 800*480 HD, TFT digital screen, Resistive touch screen.
MODEL Nr: C12R1 (crane)
Baseband version: 1.4rc2
Kernel version: 3.0.8 [email protected] - 102 # 447
Build number: crane_C12R1-eng4.0.4 IMM76D 20131114 test-keys
More Info on the pad here ----> http://valid.canardpc.com/a/st04bx
Had more info on the pad, but got lost after updating the busybox and loosing connection to the installed apk´s
Looking forward getting some inputs from some people in here, it would be greatly appreciated!!!:good:
PS! if it is possible to to get a cwm rec. for this would be great. I have checked some other threads in here, but they are running unofficial cyanogenmod 7 running gb with a cwm 5 made for that.
Edited:
Turns out that Busybox manager installed the busybox in \xbin instead of \sbin.
After a bit of browsing found this very helpful thread at: http://tabletrepublic.com
As there still was a file explorer that was a system apk, i could get to the external SDcard and install root explorer.
I then copied the busybox file from \xbin to \sbin, rebooted the tab and voila.....all back to normal again.
Hope it will help others that experience the same frustration after updating busybox.
PS!....would still like to know if somebody have tried to install cwm recovery, and if and when i find out my self i will let You know.
Edited:
Good News!!
Manage to install CWM recovery and backup stock ROM on the pad. Big Thank you to XDA senior member dolorespark.Here is the link to dolorespark´s CWM thread ---> http://forum.xda-developers.com/member.php?u=5094650
Update request
I just got one of these radios and was wondering if there was any more going on with this tablet. Not much is found about it when searching. It would be great to be able to do a swap of the internal system space with the external sd as the internal space is small 256mb for system & 4gb for internal sd.
Hello
I also can not find the recovery cwm for this model which is equal to your!!!only that my car radio is called XTRONS 728AD will be of the same family of radio.
The model is this:
Cpu: Allwinner A10 Cortex-A8
Android Version: 4.0.4
Model Name: C12R1
Kernel version: 3.0.8
zsl @ server-102 # 447
Thu now 1417:55:56 CST 2013
Number buld: crane_C12R1-eng 4:04 IMM76D 20,131,114 test-keys
---------- Post added at 06:22 PM ---------- Previous post was at 06:09 PM ----------
ben63vw said:
I just got one of these radios and was wondering if there was any more going on with this tablet. Not much is found about it when searching. It would be great to be able to do a swap of the internal system space with the external sd as the internal space is small 256mb for system & 4gb for internal sd.
Click to expand...
Click to collapse
I solved with Link2SD but you have to root the tablet to do this and I created a partition on the external sd in EXT2. In practice Link2SD installed on the external sd and create a shortcut of the app in such a way that the free internal memory and install any app you want
As you can see from the screeshot I have installed many applications it is I still have 111mb free of internal memory
kevinhilde said:
Hello
I also can not find the recovery cwm for this model which is equal to your!!!only that my car radio is called XTRONS 728AD will be of the same family of radio.
The model is this:
Cpu: Allwinner A10 Cortex-A8
Android Version: 4.0.4
Model Name: C12R1
Kernel version: 3.0.8
zsl @ server-102 # 447
Thu now 1417:55:56 CST 2013
Number buld: crane_C12R1-eng 4:04 IMM76D 20,131,114 test-keys
---------- Post added at 06:22 PM ---------- Previous post was at 06:09 PM ----------
I solved with Link2SD but you have to root the tablet to do this and I created a partition on the external sd in EXT2. In practice Link2SD installed on the external sd and create a shortcut of the app in such a way that the free internal memory and install any app you want
As you can see from the screeshot I have installed many applications it is I still have 111mb free of internal memory
Click to expand...
Click to collapse
Hi there kevinhilde!!! Great going with the Link2sd mod you did. Could you perhaps be a bit more specific as to what steps you did to do this, so others and i could perhaps do the same?
ben63vw said:
I just got one of these radios and was wondering if there was any more going on with this tablet. Not much is found about it when searching. It would be great to be able to do a swap of the internal system space with the external sd as the internal space is small 256mb for system & 4gb for internal sd.
Click to expand...
Click to collapse
I am in some dialog with some Devs in here, perhaps they will give it a go on looking closer on this rom. But until we get a Dev that has this type of android hybrid and would give it a go on creating a Rom, i guess we are stuck on the 4.0.4 version. Would be great getting a jellybean ore kitkat version on this, but it will take long time to recompile and also create a recovery for this.
Would like to give it a try on creating a Rom, but i am not that savvy, and time is something i do not have right now.
I hope we can find some more on this and perhaps get an update from China. To bad they did not use cwm or twr recovery instead, this rom being rooted and all.
Here is some more info on the C12R1 using Android Analyzer: http://androidfragmentation.com/database/v/dr/656788/oem/unknown/dm/C12R1/carrier/Unknown
Crane C12R1 2 din Android accelerometer GPS Wi-Fi Bluetooth radio car deck
Hi all,
Can you please post on here what exactly you managed to do to restore your device to factory spec? I cannot seem to be able to do a proper factory restore. My tablet is almost the same as this one (go on ebay and search for this string: "Android 4.0 7" Car DVD GPS Radio Stereo Player WiFi 3G+Tablet"), but has a 500 MHz CPU. The seller is the same too and am communicating with him to get the issue resolved as a 1 year warranty is claimed.
*Please PM me for links to the problem of the video as I need to do 10 posts before being allowed to post outside links.*
Edit: If you want to search for yourself, on Youtube, search for "Crane C12R1 2 din Android 4.0.4 car deck with removable table. Invalid Key issues." and also "Crane C12R1 2 din Android 4.0.4 car deck with removable table. Factory reset issues." by author Alexander Huzar.
Summary: when I push the PAD button, it says “invalid key” and does not enter Android mode. Entering recovery mode, I can only cycle the first "No" options, I cannot go down further to select the "Yes" option. Any help trying to reset to factory is most appreciated.
About device:
Model number: C12R1
Android version: 4.0.4
Baseband version: 1.4rc2
Kernel version: 3.0.8 [email protected] #3 Thu Jul 18 21:06:35 CST 2013
Build number: crane_C12R1-eng 4.04 IMM76D 20130718 test-keys
Tablet details via CPU-Z:
CPU : ARMv7 Processor rev 2 (v7l)
Name : Allwinner A10
Arch : ARM Cortex-A8
Rev : r3p2
Cores : 1
CPUID : 0x4137C082
Process : 55 nm
Max Clock : 1008 MHz
GPU Vendor : ARM
GPU Renderer : Mali-400 MP
Impl.id : 0x41
Arch.id : 0x7
Var.id : 3
Part.id : 0xc08
Rev.id : 2
Model : C12R1 (crane_C12R1)
Manufacturer : unknown
Board : crane
Hardware : sun4i
Android Ver. : 4.0.4
CPUInfos :
abi : armeabi-v7a
abi2 : armeabi
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 0c81d438545348488077825116236708
Please help,
-Alexander Huzar
bricked car pad
geko1966 said:
2 Din Car DVD Stereo GPS+ CD Player +MP3 +Bluetooth +Ipod +WiFi+ 3G+7 inch Android 4.0 Tablet Car PC Media
The Pad was delivered rooted, and that was just great, so i did some modifications, such as installing Chainfires SU, Link to sd, Online nandroid and a few more goodies that a rooted android needs.
Now....here is what wend wrong, checked out the busybox installed on the pad and it was version 1.8.3 and wend in and installed busybox manager and could see that there was an update for the busybox to version 1.20.2 if i remember correctly, so i updated and everything wend smoothly, until i rebooted the pad...suddenly everything was changed, i had to calibrate the pad and so on...basically it had lost the whole configuration.
Then i wend in and checked storage!! the internal storage was now in 0.00 mb left....meaning, even when going in and wanting to re install something, there is no space, and every time i reboot i have to redo the whole thing cause it cannot keep the settings.
It runs a 3e recovery. there is a wipe/reset but it will not let me get down to the "yes wipe/reset" i can only choose the NO.
I would appreciate it, if anyone has any knowledge to this and how i can get it back to the original state.
the issue came when updating the busybox.
Facts about the PAD/OS
Android: ICS 4.0.4 rooted
Hardware Pad
CPU:Telechips TCC8803,1.0GHz; Cortex-A8 Kernel, 45nm processing.
RAM: DDR III 512M
ROM FLASH:4GB
Power IC:TDA 7388/LA47002/TA2929/TA2939
Extended memory card:Up to 32GB SD/TF card
WiFi:Bulit-in High performance, low power consumption, Atheros 6302 WiFi802.11b/g/n.
3G:3G Universal Drive ---Support extral USB Dongle:WCDMA,EVDO,TD-SCDMA GPS,JRC G591Receiving Module
G-SENSOR:3 axis acceleration sensor and 3D IC hardware acceleration,could realize dynamic 3D game and 3D interface.
CAMERA: support 0.3-2 Megapixels rear camera
Speaker:built-in speaker,1pc 1W,8Ohm
Micphone:built-in, high sensitivity input, right&left channel
Indicator light:built-in red charging indicator light,built-in vibration motor
Hardware CarAudio System
Operation System DVD platform
CPU:Toshiba TMP86FS49UG
Display:Supplier:Innolux
LCD:7 inch 800*480 HD, TFT digital screen, Resistive touch screen.
MODEL Nr: C12R1 (crane)
Baseband version: 1.4rc2
Kernel version: 3.0.8 [email protected] - 102 # 447
Build number: crane_C12R1-eng4.0.4 IMM76D 20131114 test-keys
More Info on the pad here ----> http://valid.canardpc.com/a/st04bx
Had more info on the pad, but got lost after updating the busybox and loosing connection to the installed apk´s
Looking forward getting some inputs from some people in here, it would be greatly appreciated!!!:good:
PS! if it is possible to to get a cwm rec. for this would be great. I have checked some other threads in here, but they are running unofficial cyanogenmod 7 running gb with a cwm 5 made for that.
Edited:
Turns out that Busybox manager installed the busybox in \xbin instead of \sbin.
After a bit of browsing found this very helpful thread at: http://tabletrepublic.com
As there still was a file explorer that was a system apk, i could get to the external SDcard and install root explorer.
I then copied the busybox file from \xbin to \sbin, rebooted the tab and voila.....all back to normal again.
Hope it will help others that experience the same frustration after updating busybox.
PS!....would still like to know if somebody have tried to install cwm recovery, and if and when i find out my self i will let You know.
Edited:
Good News!!
Manage to install CWM recovery and backup stock ROM on the pad. Big Thank you to XDA senior member dolorespark.Here is the link to dolorespark´s CWM thread ---> http://forum.xda-developers.com/member.php?u=5094650
Click to expand...
Click to collapse
hello, i just had this car pad same as yours about a week ago. i downloaded and install CWM and it rebooted to recovery where there were error messages that some directories could not be created. touching any button in the recovery mode only repeats the error messages. i therefore hard booted it only for it to get stuck at the android logo.
i removed the battery overnight but nothing changed.
any suggestions/help seriously needed. i have not even yet installed the radio. was playing with the pad till i get time to do the installation.
thanks
john
niijohnnie said:
hello, i just had this car pad same as yours about a week ago. i downloaded and install CWM and it rebooted to recovery where there were error messages that some directories could not be created. touching any button in the recovery mode only repeats the error messages. i therefore hard booted it only for it to get stuck at the android logo.
i removed the battery overnight but nothing changed.
any suggestions/help seriously needed. i have not even yet installed the radio. was playing with the pad till i get time to do the installation.
thanks
john
Click to expand...
Click to collapse
Did you solve the problem???
Hello! At the time, the seller threw firmware. But apparently WinCe broke
The firmware I have, but as long as the reference can not throw, if the PM.
looking for WinCE.
Maybe there is anyone?
Related
so i just bought Hipstreet Aurora (HS-7DTB6-8GB) and i happened to notice a button under backup and reset in settings for the recovery menu.
I have access to apply update from external storage however i know its not safe to use a default recovery menu in case of a brick,
Its been quite some time since i had my HTC Dream and had put Cyanogen on that, so im a bit rusty, i just need a more experienced user to guide me through flashing CM10 on an a unknown tablet, i was surprised to find the recovery menu on it.
any ways i would need someone to show me how to go about doing so, im sure alot of people here have experience flashing newer untested androids.
if it is of any help here is the
Baseband version
HS-GP707_20121116
Kernel version
3.0.8+
Build number
nuclear_gp707pub-eng 4.0.4 IMM76D 20121117 test-keys
Recovery Utility
gp707pub 3e
much appreciated to any one who replies and has experience in this field.
and if i am able to get this done ill happily post a tutorial for other Hipstreet owners
EDIT - it also appears that the tablet comes rooted, im able to over clock it with voltage control.
coldtrain said:
so i just bought Hipstreet Aurora (HS-7DTB6-8GB) and i happened to notice a button under backup and reset in settings for the recovery menu.
I have access to apply update from external storage however i know its not safe to use a default recovery menu in case of a brick,
Its been quite some time since i had my HTC Dream and had put Cyanogen on that, so im a bit rusty, i just need a more experienced user to guide me through flashing CM10 on an a unknown tablet, i was surprised to find the recovery menu on it.
any ways i would need someone to show me how to go about doing so, im sure alot of people here have experience flashing newer untested androids.
if it is of any help here is the
Baseband version
HS-GP707_20121116
Kernel version
3.0.8+
Build number
nuclear_gp707pub-eng 4.0.4 IMM76D 20121117 test-keys
Recovery Utility
gp707pub 3e
much appreciated to any one who replies and has experience in this field.
and if i am able to get this done ill happily post a tutorial for other Hipstreet owners
EDIT - it also appears that the tablet comes rooted, im able to over clock it with voltage control.
Click to expand...
Click to collapse
I'd also like to second this. I will post a file with the full specs of the tablet. I have looked at the AllWinner A10 page but it's stated for CM9 and I am unable to find enough information to see if other tablets with similar hardware and specs will work with CM.
This is quite a decent tablet, once you remove all the background junk (TitaniumBackupPro) overclock it (SetCPU) you can run some decent apps on it. Been playing Order&Chaos on it nicely. Though, messenger type apps are quite slow and so is the inbuilt browser. Firefox doesn't help all that much either so with CM10's features it will run quite nicely. Too bad the tablet is missing Bluetooth, tend to tether internet with that =P
bigbigbuddy said:
I'd also like to second this. I will post a file with the full specs of the tablet. I have looked at the AllWinner A10 page but it's stated for CM9 and I am unable to find enough information to see if other tablets with similar hardware and specs will work with CM.
This is quite a decent tablet, once you remove all the background junk (TitaniumBackupPro) overclock it (SetCPU) you can run some decent apps on it. Been playing Order&Chaos on it nicely. Though, messenger type apps are quite slow and so is the inbuilt browser. Firefox doesn't help all that much either so with CM10's features it will run quite nicely. Too bad the tablet is missing Bluetooth, tend to tether internet with that =P
Click to expand...
Click to collapse
i decided to go ahead and supply a sysinfo dump
OS
Browser UserAgent : Mozilla/5.0 (Linux; U; Android 4.0.4; en-ca; HS-7DTB6-4GB Build/IMM76D) AppleWebKit/534.30 (KHTML, like Gecko) Version/4.0 Safari/534.30
Android ID : 8b583fb172740dd5
Uptime : 0 days, 20 hours, 16 minutes, 35 seconds
Uptime (without sleeps) : 0 days, 4 hours, 16 minutes, 44 seconds
Configuration
Font Scale : 1.15
Hard Keyboard Hidden : YES
Keyboard : NOKEYS
Keyboard Hidden : NO
Locale : en_CA
MCC : 0
MNC : 0
Navigation : NONAV
Navigation hidden : YES
Orientation : LANDSCAPE
Screen Height DP : 592
Screen Width DP : 1066
Smallest Screen Width DP : 640
Screen Layout :
LONG_NO
SIZE_LARGE
SIZE_NORMAL
SIZE_SMALL
Touchscreen : FINGER
UI Mode :
NIGHT_NO
TYPE_NORMAL
BuildInfos
Android version : 4.0.4
Release Codename : REL
API LEVEL : 15
CPU ABI : armeabi-v7a
Manufacturer : unknown
Bootloader : unknown
CPU ABI2 : armeabi
Hardware : sun5i
Radio : unknown
Board : nuclear
Brand : softwinners
Device : nuclear-gp707pub
Display : nuclear_gp707pub-eng 4.0.4 IMM76D 20121117 test-keys
Fingerprint : softwinners/nuclear_gp707pub/nuclear-gp707pub:4.0.4/IMM76D/20121117:eng/test-keys
Host : admin
ID : IMM76D
Model : HS-7DTB6-4GB
Product : nuclear_gp707pub
Tags : test-keys
Type : eng
User : lixsh
Memory
Download Cache Max: 252MB/ Free: 246MB
data Max: 504MB/ Free: 256MB
External storage: mounted
External storage Max: 5.79GB/ Free: 3.71GB
External storage removable: false
External storage emulated: false
Total RAM: 353MB
Free RAM: 111MB
Threshold RAM: 37.53MB
Low Memory Killer Levels
FOREGROUND_APP:__ 14.35MB
VISIBLE_APP:_________ 19.41MB
SECONDARY_SERVER: 24.47MB
HIDDEN_APP:________ 32.47MB
CONTENT_PROVIDER: 37.53MB
EMPTY_APP:__________ 44.70MB
CPU
Processor ARMv7 Processor rev 2 (v7l)
BogoMIPS 1145.00
Features swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer 0x41
CPU architecture 7
CPU variant 0x3
CPU part 0xc08
CPU revision 2
Hardware sun5i
Revision a13a
Serial 0a4099c1414130304141414116254141
Frequency range: 60.0 -> 1152.0MHz
Current Frequency: 1152.0MHz
Screen
Resolution: 800 x 444
Refresh Rate: 59.75
X factor for DIP: 0.75
Density: 120 dpi
Pixel per inch X: 160.0 dpi Y: 160.42105 dpi
Sensors
MC32X0 3-axis Accelerometer: 0.5 mA by DMT
Environment
Root Directory: /system
Data Directory: /data
Download Cache Directory: /cache
External Storage State: mounted
External Storage Directory: /mnt/sdcard
JavaProperties
java.vendor.url:
java.class.path: .
java.class.version: 50.0
os.version: 3.0.8+
java.vendor: The Android Project
user.dir: /
user.timezone: null
path.separator: :
os.name: Linux
os.arch: armv7l
line.separator:
file.separator: /
user.name:
java.version: 0
java.home: /system
GPU
ARM Mali-400
Click to expand...
Click to collapse
*bump*
I'd really like someone with much more experience to look into this please?
anyone know the steps to installing cyanogen on an unknown device?? where are the developers at!
CM10
Had any luck with this yet? Trying the same thing, no luck yet. And yes these come rooted
mebrad36711 said:
Had any luck with this yet? Trying the same thing, no luck yet. And yes these come rooted
Click to expand...
Click to collapse
unfortunately no, waiting on a response, im thinking tomorrow i will post on cyanogenmod's forum requesting a port, i'll post the link here if anything.
the demand for a port must not be small seeing as we have 3 people here all waiting on the same thing.
still no luck
ok
-Bump-
Do not want this thread to die =P
Can anyone help? o3o
Bump
10 Day overdue Bump 8P
Cmon I'm sick of the crap that came with this >_< so much that's in it that doesn't need to be there >_> and would be nice to use the CM settings for overclocking instead of relying on SetCPU and it's slowness x-x especially on this tablet with such limited RAM =S
EDIT: I would take the time in going about experimenting myself but you see I don't have another tablet to replace and haven't really been able to go about learning how to create my own ROM especially at the level of CM >_>
As soon as time is free I'll take it a shot though ^_^
BUMP-Info
So I am hoping for a possible CM10 Mod for the Hipstreet Aurora, but in the meantime I am going to try and develop my own ROM for this tablet in hopes to increase performance, remove unwanted bloatware and increase the user experience without the nags of what this tablet comes with. If anyone with a considerable amount of experience in Custom ROM building is willing to take up this, I'll be more than willing to accept your help. I'll send you a Stock ROM once such is opened to discussion.
I'll post a new thread in the means of a new project.
P.S This tablet has really good potential, just with some decent tweaks, this tablet will actually run quite well.
bigbigbuddy said:
BUMP-Info
So I am hoping for a possible CM10 Mod for the Hipstreet Aurora, but in the meantime I am going to try and develop my own ROM for this tablet in hopes to increase performance, remove unwanted bloatware and increase the user experience without the nags of what this tablet comes with. If anyone with a considerable amount of experience in Custom ROM building is willing to take up this, I'll be more than willing to accept your help. I'll send you a Stock ROM once such is opened to discussion.
I'll post a new thread in the means of a new project.
P.S This tablet has really good potential, just with some decent tweaks, this tablet will actually run quite well.
Click to expand...
Click to collapse
Glad you are working on a rom for this. I've been fighting with a hipstreet aurora HS-7DTB6-8GBR (Allwinner A13) 1112V706
So far I bricked it with an app called android tuner, then I learned to use file suit to flash the Tragidy momo firmware to it. The tablet does work again, but with minor problems. Since the tragidy firmware is for a Chinese tablet with the same motherboard, the momo has a different case with different buttons, screen and gyro. So now my touchscreen is completely reversed (display is okay), the headphone jack doesnt work, and the gyro doesnt work either. On the plus side I can use it with a mouse through the usb dongle, and with a hub even a keyboard. Also the tragidy build is much faster, and has a working google play store.
I have decided to dust off my ubuntu crate and will attempt to modify the tragidy firmware to properly map the buttons, touchscreen, and gsensors.
I do hope hope you are more successful than I am and look forward to your results, as I'm not entirely confident in my ability to translate my very limited linux kernel skills to the android kernel.
Good Luck:good::good:
Cha1n5aW said:
Glad you are working on a rom for this. I've been fighting with a hipstreet aurora HS-7DTB6-8GBR (Allwinner A13) 1112V706
So far I bricked it with an app called android tuner, then I learned to use file suit to flash the Tragidy momo firmware to it. The tablet does work again, but with minor problems. Since the tragidy firmware is for a Chinese tablet with the same motherboard, the momo has a different case with different buttons, screen and gyro. So now my touchscreen is completely reversed (display is okay), the headphone jack doesnt work, and the gyro doesnt work either. On the plus side I can use it with a mouse through the usb dongle, and with a hub even a keyboard. Also the tragidy build is much faster, and has a working google play store.
I have decided to dust off my ubuntu crate and will attempt to modify the tragidy firmware to properly map the buttons, touchscreen, and gsensors.
I do hope hope you are more successful than I am and look forward to your results, as I'm not entirely confident in my ability to translate my very limited linux kernel skills to the android kernel.
Good Luck:good::good:
Click to expand...
Click to collapse
Hmm, well since you already have a semi-stable firmware, with reference, you could get the firmware to run like a charm. I'm currently running Windows and have had some promising outcomes, along with some drawbacks, but I can say that this tablet could be promising. :good:
bigbigbuddy said:
BUMP-Info
So I am hoping for a possible CM10 Mod for the Hipstreet Aurora, but in the meantime I am going to try and develop my own ROM for this tablet in hopes to increase performance, remove unwanted bloatware and increase the user experience without the nags of what this tablet comes with. If anyone with a considerable amount of experience in Custom ROM building is willing to take up this, I'll be more than willing to accept your help. I'll send you a Stock ROM once such is opened to discussion.
I'll post a new thread in the means of a new project.
P.S This tablet has really good potential, just with some decent tweaks, this tablet will actually run quite well.
Click to expand...
Click to collapse
Hi, any update on the ROM that you're building? I'm actually looking for a stock ROM for Hipstreet Aurora - my sister handed me a bricked Aurora and it had no backup ROM, even the recovery mode seems busted. Anyway, I found a HS Aurora firmware dump online (I forgot the link though) but data.tgz was missing so the restore via adb and Uberizer was not a success. I've managed to flash a Momo9 Tragidy firmware (everything ok except for gsensor and button mapping) and also tried another a13 firmware (it runs faster, but again auto-rotate doesn't work and button functions are interchanged). I'm thinking of going back to the stock ROM - I think I have a better chance at removing the bloatware and customizing it than fixing the gsensor and the buttons.
UPDATE: I was able to remap the buttons using Button Remapper, my only problem now is the gsensor/ auto-rotate.
Stock Firmware
Hey, was wondering if any of you have a rom dump of the stock firmware. I didnt backup mine before I flashed it. I did get the touch screen and gsensor working perfect now, but my front camera doesnt work, but the back camera does. Hope someone has a rom dump. Thanks in advance!
This 9" MID A20 Allwinner tablet had 2.34gb by stock on internal storage. Something went wrong after something I couldn't say what happened.
How do i re-partition the internal storage to 2.34gb again?
Can you link me to a fireware update compatible with this device.
Android - 4.2.2
Firmware - v2.0patch1
Kernel - 3.4.39+
Thursday September 5th : 18:22:06 CST 2013
Build - wing_k70-eng 4.2.2 JDQ39 20130905 test-keys
I can't download anything on play store because it defaults to internal storage wihich is 100% full for some reason?!?
THANKS
1chris89 said:
This 9" MID A20 Allwinner tablet had 2.34gb by stock on internal storage. Something went wrong after something I couldn't say what happened.
How do i re-partition the internal storage to 2.34gb again?
Can you link me to a fireware update compatible with this device.
Android - 4.2.2
Firmware - v2.0patch1
Kernel - 3.4.39+
Thursday September 5th : 18:22:06 CST 2013
Build - wing_k70-eng 4.2.2 JDQ39 20130905 test-keys
I can't download anything on play store because it defaults to internal storage wihich is 100% full for some reason?!?
THANKS
Click to expand...
Click to collapse
This is a faulty busybox installation. Just search for fix, it's just moving some files.
Can you please send me your /vendor/modules/gslx680.ko? Thanks!
I already fixed it, had to do hours of intense research and I found the firmware and the flash utility. Successfully fixed it, then it bricked. Then I successfully fixed the brick.
So these are fun to work with because I know how to fix them so easily now!
$85 tablet on ebay if u pick one up it's 9" 800x480 dual core 512 ram with a keyboard and case. Very neat little device! We hooked up a 1TB usb hard drive directly to it and it detected it and easily played back full 1080p movies which file sizes in the 20GB range... INSANE!
I know how to root these two and the Kernel is unlocked by stock on the AllWinner A20 to 1.488Ghz from the stock of 990Mhz! 1.1Ghz is the most stable but is very nice and fast!
Later
I need firmware for this tablet and I can't found it
Hi
Can you send me the firmware? I'm unable to find it.
Thanks
1chris89 said:
I already fixed it, had to do hours of intense research and I found the firmware and the flash utility. Successfully fixed it, then it bricked. Then I successfully fixed the brick.
So these are fun to work with because I know how to fix them so easily now!
$85 tablet on ebay if u pick one up it's 9" 800x480 dual core 512 ram with a keyboard and case. Very neat little device! We hooked up a 1TB usb hard drive directly to it and it detected it and easily played back full 1080p movies which file sizes in the 20GB range... INSANE!
I know how to root these two and the Kernel is unlocked by stock on the AllWinner A20 to 1.488Ghz from the stock of 990Mhz! 1.1Ghz is the most stable but is very nice and fast!
Later
Click to expand...
Click to collapse
donlotario said:
Hi
Can you send me the firmware? I'm unable to find it.
Thanks
Click to expand...
Click to collapse
It's tough to find but I found the info on this chinese website but all the files are on my friends computer since it was his tablet.. He totally could care less about the thing since it's nearly a nightmare to use...
Too little internal store available and not enough system memory so it lags out and freezes continuously... haha I'd factory reset or whatever if you can and sell it.
anti77 said:
This is a faulty busybox installation. Just search for fix, it's just moving some files.
Can you please send me your /vendor/modules/gslx680.ko? Thanks!
Click to expand...
Click to collapse
Greetings!
Would you please elaborate? My own extensive research has uncovered absolutely nothing about fixing a blown busybox installation.
1chris89 said:
This 9" MID A20 Allwinner tablet had 2.34gb by stock on internal storage. Something went wrong after something I couldn't say what happened.
Click to expand...
Click to collapse
Can you provide more information, perhaps even a link or two, to help the rest of us who have a similar problem?
Thanks!
I have posted a potential solution on this forum located at
https://forum.xda-developers.com/an...10x-tablet-t3878560/post78413347#post78413347
Please need some help with C12R1. I have this:Telechips TCC8803, 2Din Car Media Center Running Android 4.0.4 ICS
2 Din Car DVD Stereo GPS+ CD Player +MP3 +Bluetooth +Ipod +WiFi+ 3G+7 inch Android 4.0 Tablet Car PC Media
Android: ICS 4.0.4 rooted
Hardware Pad
CPU:Telechips TCC8803,1.0GHz; Cortex-A8 Kernel, 45nm processing.
RAM: DDR III 512M
ROM FLASH:4GB
Power IC:TDA 7388/LA47002/TA2929/TA2939
Extended memory card:Up to 32GB SD/TF card
WiFi:Bulit-in High performance, low power consumption, Atheros 6302 WiFi802.11b/g/n.
3G:3G Universal Drive ---Support extral USB Dongle:WCDMA,EVDO,TD-SCDMA GPS,JRC G591Receiving Module
G-SENSOR:3 axis acceleration sensor and 3D IC hardware acceleration,could realize dynamic 3D game and 3D interface.
CAMERA: support 0.3-2 Megapixels rear camera
Speaker:built-in speaker,1pc 1W,8Ohm
Micphone:built-in, high sensitivity input, right&left channel
Indicator light:built-in red charging indicator light,built-in vibration motor
Hardware CarAudio System
Operation System DVD platform
CPU:Toshiba TMP86FS49UG
Display:Supplier:Innolux
LCD:7 inch 800*480 HD, TFT digital screen, Resistive touch screen.
MODEL Nr: C12R1 (crane)
Baseband version: 1.4rc2
Kernel version: 3.0.8 [email protected] - 102 # 447
Build number: crane_C12R1-eng4.0.4 IMM76D 20131114 test-keys
took it from this thread: http://forum.xda-developers.com/showthread.php?t=2572265
My problem is I've accidentialy deleted my /system/app/* and /data/app* files trying to free some space / I wanted to copy it on extsd card with X-plore app but it didn't work out for me I've copied the files above the number of the sdcard and they're gone / don't do this it's dangerous, and I've lost all of them. And my tablet started with the errors and stuff and I wanted to throw it off the window, than I settled down for a bit.And before a week or so I've started looking for 4.0.4 roms compatitable system apps for my rom, I've tried maybe 40 roms by now /I download the rom / extract the /system/app, and /data/app folder and try to run the tablet, but it didn't work out. I managed to run it with modacocustomrom reading one of xda threads but it started throwing exceptions. Then I've started deleting one by one system apps and I've come to the conclusion that the system could run only with 3 apk's - launcher, settings and settings storage. It started but it is not the same and I've lost all my preffs and stuff.
Please if someone have C12R1 send me /system/app/ and /data/app files. for 4.0.4 android
Appreciate it. Thanks in advance.
And could you tell me how to unpack this rom (WooComet-MiOptimusOne.com -ICS_4.0.4- F1中性-20120920.1.0.3-A721_V4.2.img) from this thread - http://forum.xda-developers.com/showthread.php?t=1925577 without the device connected to pc and this program: LiveSuit.exe. I've tryed with dd in linux on flash and with mounting img in linux but it coudn't work out why?
I've tried to unpack the img with ext4 unpacker and ext2 explorer too but it couldn't work out.
please help!
Ok guys I managed to do this, I've made the last step /flashing the rom (I wanted just to copy the system files in internal memory in /system/app and /data/app but couldn't find it anywhere), I did'nt wanted to do it this way but I've done it cause it wasn't anything else left to try after long sleepless nights
I've installed a new stock rom sun4i_crane_t02a.img and android launched but now I have another significant problem - I dont have a proper driver and my touch screen does not work.
And my android's usb debugging is not with turned on and I cant use adb or so....
Any ideas?
Please if someone have this touch screen drivers or stock or other rom that works on this device please send it to me!
This is the exact device:
http://www.aliexpress.com/item/2-Di...92768377.html&cv=11032041&af=cj_6149808&vd=30
but I cant find roms anywhere for it
Hi Razer69
I see you still have problems with your device.
Well before i wend on a Rom hunt i have managed to install CWM recovery on mine and make a backup of the stock rom, in order to test various roms, and if they do not work i restore the stock.
If you want i can create a link for you so you can download it and install it. Bare in mind though i have made some mods prior to the stock rom so it worked a bit better that when it arrived.
Did also find a link for your issue with the touch screen ----> http://www.pandawillforum.com/archive/index.php?t-12129.html
Cheers
G
Could you share how did you managed to install custom rom - clockworks - CWM because that is my problem now.
I can't install the rom because I've flashed my device - all partitions - kernel, recovery, rom - with LiveSuite and .img file but eventually
I found out this rom is not for my device - the rom I've installed is C12 not C12r1, and I'm still looking for C12r1.
Thank you for your answer
I've come to the conclusion I'ts wrong rom that's why the touch screen is not working.
This guys are writing the same here:
http://www.pandawillforum.com/archive/index.php?t-12129.html
"sun4i_crane_t02a.img is not work with FT5306DE4 Chipset,is wrong point of touch screen"
Today I'll try their methods
thanks
Hi all,
I'm quite new with android and this explains why I'm here asking for help and direction to solve a problem. I've a chinese phone based on MT6577 hw; it's branded ORDRO P550 4.1.1. Well, months ago I was able to root it but after some months it started to be unresponsive and very slow. Perhaps because I moved some software from ROM to SD in order to get more free memory. In fact, MT65xx comes out with only 512 MB of ROM/RAM. So, I found and application named MT65xx_repartition and I decided to check if it did what it promised. Basically, it claims to be able to repartition the internal memory, using phone's internal memory to increase phone's RAM.
I made a backup of what I needed and I was able to find a stock ROM of the same model from a web site.
After running the repartition program my poor phone did not start up again; it only showed the small robot wit a big exclamation mark. OK, I thiught, I've the original ROM.....let's re-flash and learn something new. After several attempts to install USB drivers on my virtual Win7/64 box I was able to re-flash the ROM again. Et voila'....it was reborn but, alas, a little bit handicapped.
First of all the IMEI was wrong or not existent so I got no carrier and secondly, the camera didn't work at all.
For the IMEI issue I was able to fix it thanks to Mobileuncle Tools (fortunately I made a backup of IMEI before proceed) but I could not find a solution for the camera.
I checked and googled everywhere and I think that it could be a driver issue...something related with libcam*.so files but I have absolutely no idea how to fix them; do I need to recompile the drivers? I checked init.rc file but I found no evidence of libcam*.so modules nor any insmod instruction to load them. I'm not really familiar with linux; I'm moving my first steps with it and the only complicate thing I did was to recompile wifi drivers for my Debian Virtual box.
Here a partial list of phone's details collected by Mobileuncle Tools:
CPU
CPU ARMv7 rev 0 (v7l)
Hardware MT6577
Kernel
Linux Version 3.4.0
OS
OS brand ORDRO
Model P550T
Bootloader unknown
Prouct e1901_v77_gq2002
Display e1901_v77_gq2002_2013.03.25
Release 4.1.1
fingerprint alps/e1901_v77_gq2002
MTK Build
.platform = MT6577
.chip_ver = S01
.wlan.chip = MT6628
The main difference between this ROM and the previous one (for completeness I forgot to download) is the ROM size; now is 878MB (?) instead of the previous one that was 493 MB.
Thanks a lot for any support or direction you can give me; I'm looking for a set of instruction to solve this problem and learn something new.
PK
Hi,
I'm having big problem by low level format of my tablet RK3188(chip) have no idea of model is 10' one.
I'm looking to make a flashable img files from my backup CWM recovery to use with Android tool since my tablet is unknown
china with RK3188 chip.
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP
Recovery, system, boot, kernel are large files in cwm I need to make them smaller (proper size) to use with Android tool. Please correct me if I'm wrong and tell me if its possible or any other way to get to my CWM .I just need to get to recovery. Please help.
Many thanks for your time.
styropian said:
Hi,
I'm having big problem by low level format of my tablet RK3188(chip) have no idea of model is 10' one.
I'm looking to make a flashable img files from my backup CWM recovery to use with Android tool since my tablet is unknown
china with RK3188 chip.
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP
Recovery, system, boot, kernel are large files in cwm I need to make them smaller (proper size) to use with Android tool. Please correct me if I'm wrong and tell me if its possible or any other way to get to my CWM .I just need to get to recovery. Please help.
Many thanks for your time.
Click to expand...
Click to collapse
Update __
RK3188 adb is running no screen__help PLEASE
After erasing IDB in my unknown china tablet and loosing my whole system I was able to load different custom firmware from Chuwi v88 + different kernel and my Tab popup in windows showing 2 extra drives F and G.I did open android studio and notice access to adb and all activity in my android.The RKandroidTool also recognizing my tab.
No reaction to power button only automatically connecting to my comp ( black screen on my tab).
I have original CWM backup of my device.
Can someone advise me how to access recovery from this point or find the way to completely start my tablet.Maybe is possible to recover CWM from adb?I will need some help to use a proper commands perhaps in adb.