hey
since a little time when i try to connect my phone (kyno) on my computer whith usb cable i have a message on my phone "error creating notification java.util.concurrentmodificationexception null" and i must reboot my phone to remove it
what does that mind and what must i do to remove this message definitively
thank's
Related
Ok so I just performed a Task29 which was successful, and as I went to flash a new ROM I got a message saying check USB is connected to PC and Phone.It doesn't seem to be connecting.When I enter Bootloader "serial" shows up at the bottom but not "USB" How can I check my USB is causing the problem?The other problem this creates is that I cant now use my phone!
I got stuck on blackscreen and 20% pink screen
=======================================
b4 this I using AOKP build 38 by Championswimmer
and I facing problem with USB and charging
so I wanna makesure which the problem came from
either from USB port or ROM or Kernel
======================================
then i tried to flash K kernel v3
then USB 'not regonised all the way..
restart PC and I flash 2.3 gb official
then when flashing in 35% USB problem again (flashing aborted)
=======================================
and now
I can't charge my phone
I can't flash
I can't boot
(just SE white logo then go to 20% pink screen and black screen for the rest)
I can get into recovery....
I tried SEUS
-whenever updating in progress USB connection problem
I tried SEPCC
-same like SEUS
I tried Flashtool
-same like b4
anyway to fix my problem??
please help me..
Did you try pc companion like this?
Turn the phone off and disconnect it from the computer. Run the Software.
1. No matter what the program says do not connect the phone until you complete step 9.
2. In the welcome screen if asked click on Start, next you will be shown what Media Go offers, click on "next" then you will see a presentation on what Support Zone offers, click on "Finish".
3. In the next section from "Support Zone” and "Media Go" new select “Support Zone" and click on start.
4. On the next page select "Software Update" and click on "Start".
***At this point if you get an error stating that "unable to install update components" or "server is busy”, please proceed to step 12.
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "Repair Phone". (The program will issue you a warning on the content that you will lose during the update). Please be aware that any data saved only in your phone memory will be erased as part of the Phone Repair.
6. Choose Continue.
7. After that, the program will download the necessary information (several minutes) and it will present you with a list of phones.
8. Choose the X10 from the list (close to the bottom of the list) by clicking on the icon for the phone. Then click on "Next". Then you will see a new section telling you how to connect the phone. (Don't connect it yet!).
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC but not to the phone, then while pressing and holding the back key (the one on the lower right part of the screen that has the icon of an arrow pointing to the left on top) Connect the cable to the phone and keep holding the back key until the program says "The update of your phone has started..." (In some cases a message of "Installing drivers" will appear before the message of "The update of your phone has started..." is shown.).
10. If the steps were not followed exactly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar". If this happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If PC Companion proceeds correctly with the update it will tell you to release the back key. Wait for the update to finish and follow instructions on the screen.
12. If you receive the message: “Unable to install update components".
a. Close PC Companion.
b. Install Java from: http://www.java.com.
c. Start Pc companion again and try to do the software unlock process once more
something similar happened to my PSVITA when I had it charging recently. Was gonna send it back for a new one when I tried to change the usb cord and fixed the problem. Trust me, sometimes the fix is as simple as that, holler back if you did.
hit thanx if I helped
Hello everyone, as the topic name states, my galaxy s3 refuses to connect to kies.
The first time i attempted to connect it to the PC through USB cable kies told me, that my phone is locked and I need to enter unlock pattern, I did so, but nothing happened, connecting was shown for indefinite amount of time. So i disconnected the phone from usb manually. Restarted pc, fired up kies again and tried to connect the phone. Now every time I connect the phone kies simply shows connecting for a very long time without any errors, and on phone when its connected to the pc I get 'Connected as media device/or service - dont remember' notification. Whats my problem, and how do i fix that. Oh, and I'm running WinXP
Thanks for answers in advance!
tcpa252 said:
Hello everyone, as the topic name states, my galaxy s3 refuses to connect to kies.
The first time i attempted to connect it to the PC through USB cable kies told me, that my phone is locked and I need to enter unlock pattern, I did so, but nothing happened, connecting was shown for indefinite amount of time. So i disconnected the phone from usb manually. Restarted pc, fired up kies again and tried to connect the phone. Now every time I connect the phone kies simply shows connecting for a very long time without any errors, and on phone when its connected to the pc I get 'Connected as media device/or service - dont remember' notification. Whats my problem, and how do i fix that. Oh, and I'm running WinXP
Thanks for answers in advance!
Click to expand...
Click to collapse
Try installing these drivers https://www.dropbox.com/s/fm9b12xy3r0t07b/SAMSUNG_USB_Driver_for_Mobile_Phones.zip. After installation reboot the pc and reconnect the phone with Kies. It should be good now.
Thanks for suggestion, but that did not work(just tryed)
Small update of what has already been done to no avail.
Manually reinstalling samsung usb drivers
Connection troubleshoot from the tools menu in kies
Wiping cache on the phone
Ticking and unticking usb debug option in on of the setting submenus
Attempted to enable usb tethering...
As a side note, myphoneexplorer works perfectly fine. But it ends with that.
God damn it i need kies
When i connect my SGS2 to my computer a little message pops up in the notification bar saying :
"the last device you connected to this computer malfunctioned" and when i go into Device manager i have a little yellow triangle next to an usb sayig "Unknown usb deivce" ,i've attached an image/screenshot that tells a better story.
Also when i connect the phone nothing happens on the phone (no icons, nothing).Just get that beep from the Windows.
I have tried :
- reinstalling the samsung drivers for the windows (event tried with Kies)
- tried mounting it from Recovery
- trying installing/reinstalling those windos usb drivers for that usb
nothing helps...any1 ?
Phone :
Custom rom , kitkat with TWRP recovery 2.7
PC :
Windows 8.1 64bit.
~ i have never had this problem before, i havent connected my phone to my pc in a long time so i dont know what could have caused this
I rooted my phone and tried to install TWRP recovery. Somehow, the process continued for hours and at last I removed the battery and put it back, so as to stop the process. I was unable to recover from the bootloop error forever, since then.
My PC (Windows 10) does not recognize my phone when connected via a USB cable. It gives the error- 'USB Device not Recognized (Configuration Descriptor Request Failed)' .
Please help me fix this error.