I'm using "[ROM] [4.1.2] FlyingThor V2.0 SuperFast | Stable | No Lags | Updated: 28-Oct-2013" and "[Kernel][Dec 12]Experimental v11c[JB 4.1.2]"
I know that instruction say: "7.During second reboot, you will b stuck at Sony LOGO for a while. But don't b panic everything goes right after a while." but even after wait about 5 min it doesn't boot. After take off battery and turn on the phone I can go to cwm after a while. I have to flash rom again so the boot works, but when turn off the phone I'm stucked again.
forvasc said:
I'm using "[ROM] [4.1.2] FlyingThor V2.0 SuperFast | Stable | No Lags | Updated: 28-Oct-2013" and "[Kernel][Dec 12]Experimental v11c[JB 4.1.2]"
I know that instruction say: "7.During second reboot, you will b stuck at Sony LOGO for a while. But don't b panic everything goes right after a while." but even after wait about 5 min it doesn't boot. After take off battery and turn on the phone I can go to cwm after a while. I have to flash rom again so the boot works, but when turn off the phone I'm stucked again.
Click to expand...
Click to collapse
You have error in this ROM because you install a different kernel to the ROM developer, the kernel that is in the ROM is not experimental kernel, is a custom kernel developer, you have two options
1.- Open the zip of the rom and replace the boot.img by the experimental kernel
2.- Extracts the boot.img that is in the ROM and use flashtool to install.
not have to do much, just install the original kernel of the ROM, not the experimental kernel.
you decide
Kobalto07 said:
You have error in this ROM because you install a different kernel to the ROM developer, the kernel that is in the ROM is not experimental kernel, is a custom kernel developer, you have two options
1.- Open the zip of the rom and replace the boot.img by the experimental kernel
2.- Extracts the boot.img that is in the ROM and use flashtool to install.
not have to do much, just install the original kernel of the ROM, not the experimental kernel.
you decide
Click to expand...
Click to collapse
Hi Kobalto07 thanks for your reply. I have to say I'm confused because the instruction in rom post say "1.Install Experimental Kernel Latest Version from here or Flash the Boot.img from the ROM". and that's what I did, but I'll try your sugestion and post the result here.
forvasc said:
Hi Kobalto07 thanks for your reply. I have to say I'm confused because the instruction in rom post say "1.Install Experimental Kernel Latest Version from here or Flash the Boot.img from the ROM". and that's what I did, but I'll try your sugestion and post the result here.
Click to expand...
Click to collapse
is a pleasure to collaborate
yeah, he said that, happens is that the experimental kernel is updated continued, then the version that put the developer un the ROM will obsolete.
then the developer leaves the user will decide kernel to use
I will be attentive to your results.
Enviado desde mi Xperia U mediante Tapatalk
Kobalto07 said:
is a pleasure to collaborate
yeah, he said that, happens is that the experimental kernel is updated continued, then the version that put the developer un the ROM will obsolete.
then the developer leaves the user will decide kernel to use
I will be attentive to your results.
Enviado desde mi Xperia U mediante Tapatalk
Click to expand...
Click to collapse
Hi Kobalto07, I extracted boot.img from rom zip and flash it using flashtool but I still have the same result.
This time I waited about 8 min the 2nd reboot but get stucked at sony logo.
forvasc said:
Hi Kobalto07, I extracted boot.img from rom zip and flash it using flashtool but I still have the same result.
This time I waited about 8 min the 2nd reboot but get stucked at sony logo.
Click to expand...
Click to collapse
Hello
I guess that after flashing kernel you did full wipe and reinstall the ROM right?
Enviado desde mi Xperia U mediante Tapatalk
Kobalto07 said:
Hello
I guess that after flashing kernel you did full wipe and reinstall the ROM right?
Enviado desde mi Xperia U mediante Tapatalk
Click to expand...
Click to collapse
Of course... NOT
I didn't do full wipe. I'm lazy and don't want to install everything again.
But I'll do that and let you know. Thanks again.
forvasc said:
Of course... NOT
I didn't do full wipe. I'm lazy and don't want to install everything again.
But I'll do that and let you know. Thanks again.
Click to expand...
Click to collapse
as they say, all that begins well ends well if you have everything in order, flash kernel in the zip, make full wipe and install ROM, your device will thank you xD
Enviado desde mi Xperia U mediante Tapatalk
Kobalto07 said:
as they say, all that begins well ends well if you have everything in order, flash kernel in the zip, make full wipe and install ROM, your device will thank you xD
Enviado desde mi Xperia U mediante Tapatalk
Click to expand...
Click to collapse
Hi Kobalto07, still not worked even doing everything according to your instructions so I flashed CM11 and the phone boot normaly. I flashed FlyingThor again according to your instructions, but besides full wipes I did a dalvik cache wipe and formated the system partition. Everything is working now. Thanks for your help.
Related
Hi SM-T531 and SM-T535 owners .
I present for you Mod Deodex based 5.0 stock firmware . After using this mod you get deodex stock firmware . You can to install Xposed modules and other mods and improvements . You can deknox , debloat your firmware .
T531 mod based on T531XXU1BOE6 stock firmware .
T535 mod based on T535XXU1BOD8 stock firmware .
HOW TO INSTALL :
Mod installs on based firmware (prefered pure firmware). Firmware must have installed SuperSU and BusyBox . Also you must to install custom recovery (prefered Philz Touch ) . Mod-archiv put to ExtSDcard .
Then you go to recovery and install mod from ExtSDcard . After installation you need do wipe dalvik and cache . Reboot .
Not to do any wipe before installation .
Wait 6-12 min . Then will be optimization .
Mod have SDcard fix .
DOWNLOAD :
SM-T531 https://www.androidfilehost.com/?fid=24052804347799032
SM-T535 https://www.androidfilehost.com/?fid=24052804347799026
Thanks :
@wlryss @Sekes@klaus.ad
Reserved
Reserved
Please change the SMT535 link. When flashed in twrp bootloop. The problem is this rom is for smt530 no for smt535.......
Enviado desde mi SM-T535 mediante Tapatalk
isaakmg said:
Please change the SMT535 link. When flashed in twrp bootloop. The problem is this rom is for smt530 no for smt535.......
Enviado desde mi SM-T535 mediante Tapatalk
Click to expand...
Click to collapse
You must to use Philz touch recovery (read OP) https://www.androidfilehost.com/?w=files&flid=23537
If you want to use TWRP you need select him . I dont garranty it correct work
repey6 said:
You must to use Philz touch recovery (read OP) https://www.androidfilehost.com/?w=files&flid=23537
If you want to use TWRP you need select him . I dont garranty it correct work
Click to expand...
Click to collapse
With Phliz Recovery the same problem, bootloop after flash. The link for SMT535 isn't for this model.....
Enviado desde mi SM-T535 mediante Tapatalk
isaakmg said:
With Phliz Recovery the same problem, bootloop after flash. The link for SMT535 isn't for this model.....
Enviado desde mi SM-T535 mediante Tapatalk
Click to expand...
Click to collapse
Strictly implement the recommendations of the OP and succeed . May be you have another version stock firmware or forgot busy box or else .
I reformat my sm-t535. Then flash stock rom that wifi doesnt work. After that i flashed this mod. After the installation it says that i dont have supersu and if i want to install. So i install it. Then it reboot and optimize. When it reboot it has an app "supersu installer". and i have to install the gui of super user. where do i hace to find it?
NHOman14 said:
I reformat my sm-t535. Then flash stock rom that wifi doesnt work. After that i flashed this mod. After the installation it says that i dont have supersu and if i want to install. So i install it. Then it reboot and optimize. When it reboot it has an app "supersu installer". and i have to install the gui of super user. where do i hace to find it?
Click to expand...
Click to collapse
More detales please . What is the superSU ? How you installed it ? Were Busybox and superSU installed before flashing mod?
repey6 said:
More detales please . What is the superSU ? How you installed it ? Were Busybox and superSU installed before flashing mod?
Click to expand...
Click to collapse
I reformat my tablet. So no busybox and supersu installed
NHOman14 said:
I reformat my tablet. So no busybox and supersu installed
Click to expand...
Click to collapse
How you install this mod if you dont read OP? I dont know for sure how i can help you . Reflash superSU again and install busybox
repey6 said:
How you install this mod if you dont read OP? I dont know for sure how i can help you . Reflash superSU again and install busybox
Click to expand...
Click to collapse
Ok ill try.
Thanks.
This mod doesnt let you on the wifi. I tried it by myself. I flash stock rom and flash this mod and it happened. Does this thing happened to you?
NHOman14 said:
This mod doesnt let you on the wifi. I tried it by myself. I flash stock rom and flash this mod and it happened. Does this thing happened to you?
Click to expand...
Click to collapse
At first you need install your stock firmware and start it .Then check your wifi and etc. Then install supersu and busybox . And only then install mod .
repey6 said:
At first you need install your stock firmware and start it .Then check your wifi and etc. Then install supersu and busybox . And only then install mod .
Click to expand...
Click to collapse
Ok sir, ill try. Coz i flashed it without root.
Thanks.
I did all you said, but my installer could no longer install apps.
emassy said:
I did all you said, but my installer could no longer install apps.
Click to expand...
Click to collapse
Very little info .
You say we must flash SD card mod. Then you say SD mod is in rom.
Must I flash SD mod?
Where is SD mod flash file?
Sorry just confused...thanks
UPDATE:
When the install is finished can I install TWRP 3.0 recovery?
Finefeather said:
You say we must flash SD card mod. Then you say SD mod is in rom.
Must I flash SD mod?
Where is SD mod flash file?
Sorry just confused...thanks
UPDATE:
When the install is finished can I install TWRP 3.0 recovery?
Click to expand...
Click to collapse
The first is full nonsense .
And yes , you can install .
repey6 said:
Very little info .
Click to expand...
Click to collapse
What i meant was that my default installer was corrupt and auto stops each time i boot my phone as such i cant install apps even from googleplay store. Again i had to reflash my stock rom in order to fix it back error.
emassy said:
What i meant was that my default installer was corrupt and auto stops each time i boot my phone as such i cant install apps even from googleplay store. Again i had to reflash my stock rom in order to fix it back error.
Click to expand...
Click to collapse
My mod is absolute correct . All your issues from your incorrect istallation
Hello Users OnePlus2
CyanogenMod 13 Nightly Official for OnePlus2
Download:
https://download.cyanogenmod.org/?device=oneplus2
Log:
https://www.cmxlog.com/13/oneplus2
GAPPS:
www.opengapps.org
What will be the proper steps to flash this?
y7038862 said:
What will be the proper steps to flash this?
Click to expand...
Click to collapse
1. flash Switch_tOS3_H2OSMMv3.zip link to thread: http://forum.xda-developers.com/oneplus-2/general/switch-firmware-twrp-t3371583
2. Wipe System, Data, Cache and Dalvik
3. flash Official CM13
4. flash GAPPS
5. REBOOT and enjoy official cm13
Regards,
flo071
y7038862 said:
What will be the proper steps to flash this?
Click to expand...
Click to collapse
Grarak said:
For anyone who is not sure what to flash
Flash oos beta 2
Reboot to fastboot
Flash TWRP for M bootloader
WIPE
Flash CM
Flash gapps
Reboot
Click to expand...
Click to collapse
From his Twitter account (@Grarak).
did anyone try the official cyanogenmod recovery?
I tried already.running smooth n great
i keep getting error 7, and i have tried every recovery, and the switch firmware zips, even stock recovery any ideas
dnp77 said:
i keep getting error 7, and i have tried every recovery, and the switch firmware zips, even stock recovery any ideas
Click to expand...
Click to collapse
Flash oos 301 beta, factory reset, then flash cm 13 and gapps, reboot. Works great for me.
Sent from my ONE A2003 using Tapatalk
Guys plz tell me will this recovery give me otg..... ? thanks in advance
Anyone is facing issue with fingerprint unlock? I'm coming from unofficial cm13, followed all the steps and home button is working, registering fp it's ok but unlock the phone with it doesn't work..
Oh and another difference from unofficial One, can't set custom slider like all/vibrate/none, need to use a 3rd part app...
Inviato dal mio ONE A2001 utilizzando Tapatalk
Do you guys think it's stable enough for daily driver?
Thanks.
LogicalJunkie549 said:
Do you guys think it's stable enough for daily driver?
Thanks.
Click to expand...
Click to collapse
yes.... i use it since yesterday.... no bugs so far... Performance and. battery life are good :good:
Regards,
flo071
Btw , for any of you guys wondering, FP for 1Password is working for this ROM
Furthermore, FP overall is blazing fast as well
Installed it yesterday night, but had to revert to Skydragon: included root gave fc with titanium backup and missed the "service" command needed by some of my Tasker projects, but when I installed supersu got stuck at 1+ logo at boot
Inviato dal mio ONE A2003 utilizzando Tapatalk
Not working
flo071 said:
1. flash Switch_tOS3_H2OSMMv3.zip link to thread: http://forum.xda-developers.com/oneplus-2/general/switch-firmware-twrp-t3371583
2. Wipe System, Data, Cache and Dalvik
3. flash Official CM13
4. flash GAPPS
5. REBOOT and enjoy official cm13
Regards,
flo071
Click to expand...
Click to collapse
Hey tried this method but its not working.. It keeps showing Patching update unconditionally for hours. I waited for 4 hours but no progress. Please help!!! Thanks in advance!
Prashant Sakpal said:
Hey tried this method but its not working.. It keeps showing Patching update unconditionally for hours. I waited for 4 hours but no progress. Please help!!! Thanks in advance!
Click to expand...
Click to collapse
did you a fully clean flash?
Regards,
flo071
Yes.
flo071 said:
did you a fully clean flash?
Regards,
flo071
Click to expand...
Click to collapse
Yes I did clean flash.
Prashant Sakpal said:
Yes I did clean flash.
Click to expand...
Click to collapse
Try reflashing the ROM, i had no issues
Regards,
flo071
I am OS 3.02 do I need flash any firmware to get cyanogenmod
Sent from my ONE A2005 using XDA-Developers mobile app
Just flash right recovery from Graraks twitter and clean flash rom and gapps.
Hi, just received a link to a cm14 build for this phone. Downloaded and flashed it trough twrp, but it doesnt work. Maybe you can help me. I dont know where that build come from. I did wipes (cache,data,dalvik,system and internal storage), then flashed the zip and rebooted. It would load with the bootanimation even with charging led on (almost booted?), but it reboots. I did the same flashing process but flashing 7.0 gapps, and this time, phone would stuck on bootanimation forever. IMPORTANT: TWRP in both cases gave me two errors, you have the screenshot down there.
ar u trying to change twrp? can u share link?
That two commands are not unusual for CM14. Can you provide us source of that link from where you downloaded the ROM.
Sent from my Redmi Note 3 using Tapatalk
Just found the website from the author of the ROM, here you have:
https://sourceforge.net/projects/abhi/files/?source=navbar
Enviado desde mi Redmi Note 3 mediante Tapatalk
no sign for the source download page
Supercharlie25 said:
Just found the website from the author of the ROM, here you have:
https://sourceforge.net/projects/abhi/files/?source=navbar
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
no sign for the source download page
---------- Post added at 05:36 AM ---------- Previous post was at 05:35 AM ----------
ioosis said:
no sign for the source download page
Click to expand...
Click to collapse
try without installing gaps
Hi, I have just tried to flash the ROM. Doesn't boot. If I flash 7.0 GApps, it just shows the CM face, then the ripples appear 3-4 times before hanging and reboots. I wiped dalvik cache and cache after that, bootloop. Flashed back to CM13.
Why u guys r flashing my broken test builds? Keep patience for Sometime. Nought for kenzo is in its way.. Most probably it will released publicly soon
Please stop posting about cm-14.0 and other roms when it is not ready, cm-14 is in staging mode, so be patient
When is the cm 14 ( official nightly) estimated to be released ??
Sent from my Redmi Note 3 using Tapatalk
No deadlines guys, be patient.
Enviado de meu Redmi Note 3 usando Tapatalk
@War_machine28 said:
Why u guys r flashing my broken test builds? Keep patience for Sometime. Nought for kenzo is in its way.. Most probably it will released publicly soon
Click to expand...
Click to collapse
haha, that's because we can't wait! Keep up the good work in delivering CM14 for Kenzo!
Anyone tried this ?
https://androidfilehost.com/?fid=24713784966775139
i tried build 20160909 it booted up but com.android.phone keeps crashing
diamondlol said:
i tried build 20160909 it booted up but com.android.phone keeps crashing
Click to expand...
Click to collapse
Did you do clean install or dirty flash? And any other bug you noticed?
Sent from my Redmi Note 3 using XDA-Developers mobile app
abhimanyu.singh said:
Did you do clean install or dirty flash? And any other bug you noticed?
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
i clean installed without gapps other than that sim doesnt work
diamondlol said:
i clean installed without gapps other than that sim doesnt work
Click to expand...
Click to collapse
may be your efs partition got corrupted.... restore it if you have previously backed up and then check
bravonova said:
may be your efs partition got corrupted.... restore it if you have previously backed up and then check
Click to expand...
Click to collapse
clean installed and then restored efs but nothing changed android.phone still crash now im going back to cm13 because i need the phone
Can somebody publish logcat of cm14 boot failure? I want to discover it.
tank0412 said:
Can somebody publish logcat of cm14 boot failure? I want to discover it.
Click to expand...
Click to collapse
sorry you have to say that I had just returned to cm13
Sent from my Redmi Note 3 using Tapatalk
hello everyone
I have yodarom v10.0 installed on my Honor 7, the developper stopped the developpement, and I would like to updated to another custom rom, based on B371.
1- How do I do this update, should I have to come back to stock rom first?
2- Wich custom rom do you think I should install, I hesitate , "Pure Emui" or H7cRom ? and why?
Thanks
All these roms have the same base , you dont need to go back to stock.
i run MMplusKang by WBT,the support is very good and the K-Settings features awesome
fredfred41 said:
hello everyone
I have yodarom v10.0 installed on my Honor 7, the developper stopped the developpement, and I would like to updated to another custom rom, based on B371.
1- How do I do this update, should I have to come back to stock rom first?
2- Wich custom rom do you think I should install, I hesitate , "Pure Emui" or H7cRom ? and why?
Thanks
Click to expand...
Click to collapse
Just boot into TWRP recovery.
Wipe data/factory reset. RECOMMENDED
Install the ROM of your choice.
Enjoy!!!
Sent from my PLK-L01 using Tapatalk
ok thanks both for your answers
I just installed and restored my settings and apps, with my hisuite backup.
90% worked well..
Just stucked at boot logo when trying to install xposed v86 sdk 23 arm64...
Do you have a simple workaround
Thanks, if it s not working I will try MM+Kang
vvv.phonandroid.com/forum/mm-kang-by-wbteam-v2-1-t157092.html
I would rather not to have to reinstall everything, But If I m forced to.. And the team seems french, It would be easier for me.
Thanks again
fredfred41 said:
ok thanks both for your answers
I just installed and restored my settings and apps, with my hisuite backup.
90% worked well..
Just stucked at boot logo when trying to install xposed v86 sdk 23 arm64...
Do you have a simple workaround
Thanks, if it s not working I will try MM+Kang
vvv.phonandroid.com/forum/mm-kang-by-wbteam-v2-1-t157092.html
I would rather not to have to reinstall everything, But If I m forced to.. And the team seems french, It would be easier for me.
Thanks again
Click to expand...
Click to collapse
After flashing Xposed you have to wait for a pretty much long time, it stays on boot screen according to the number of apps installed.
Sent from my Honor 7 using Tapatalk
Hi,
+1 with DigiGoon the boot is very long ,about 20mn for me.
I confirm we'r french but our rom run DigiGoon's kernel (simply the best)
DigiGoon said:
After flashing Xposed you have to wait for a pretty much long time, it stays on boot screen according to the number of apps installed.
Sent from my Honor 7 using Tapatalk
Click to expand...
Click to collapse
I waited, and it worked, thanks.
samcro94 said:
Hi,
+1 with DigiGoon the boot is very long ,about 20mn for me.
I confirm we'r french but our rom run DigiGoon's kernel (simply the best)
Click to expand...
Click to collapse
On first boot, after installing xposed, or everytime the phone boot?
Maybe I will give a try, later..
On the first boot.
[PORT][OFFICIAL][ROM][8.1][Pixel Experience][07/06/18]
Thanks to @sooti
Original thread
Download link Mi5X:
Google Drive
How to install:
- Unlock your bootloader
- [Optional] Flash A1 Oreo Firmware
- Flash Oreo TWRP modded
- Wipe Data/Cache/Dalvik/System
- Flash ROM zip through TWRP
- Reboot to recovery using TWRP Recovery (In TWRP go to Reboot -> recovery)
- In TWRP go to Advanced -> Terminal -> Write "a1to5x" -> press Enter
- Reboot to System
Known issues:
- Please don't install OTA package. It won't work.
- You tell me.
Contributors
Alex12, sooti
ROM OS Version: 8.x Oreo
ROM Kernel: "Sooti"
ROM Firmware Required: TWRP oreo by Alex12
Version Information
Status: Stable
Thanks to a good job
How to flash a1 oreo firmware?
---------- Post added at 01:23 PM ---------- Previous post was at 12:54 PM ----------
I noticed that this rom is originally ported from mi a1 and a lot of awesome rom like RR is on the mi a1 thread, question can i flash the other rom straight and flashed it with the same procedure?
mCdroid09 said:
How to flash a1 oreo firmware?
---------- Post added at 01:23 PM ---------- Previous post was at 12:54 PM ----------
I noticed that this rom is originally ported from mi a1 and a lot of awesome rom like RR is on the mi a1 thread, question can i flash the other rom straight and flashed it with the same procedure?
Click to expand...
Click to collapse
For A1 Oreo firmware: here
What will happpen if i dont flash the a1 firmware? It said "optional"?
a1 firmware and ‘a1to5x’ is not necessary ,just flash rom does work
A custom rom or maybe something remarkable?
Is that the truth if I understand that a terminal with android stock needs that something else that provides a custom rom, but I see that there are not many differences between them.
Is this more advisable?
Thanks
lslvxy said:
a1 firmware and ‘a1to5x’ is not necessary ,just flash rom does work
Click to expand...
Click to collapse
Really? I don't think it can boot if you do not convert kernel with "a1to5x"
bragon01 said:
Really? I don't think it can boot if you do not convert kernel with "a1to5x"
Click to expand...
Click to collapse
i just flash rom without Firmware and a1to5x ，has no problem ，work well
Does stock mi camera apps with background blur work?
mCdroid09 said:
Does stock mi camera apps with background blur work?
Click to expand...
Click to collapse
Yep working like brilliant even ar stacker.
mi stock camera app not included !! how to solve ?
xdamami said:
Yep working like brilliant even ar stacker.
Click to expand...
Click to collapse
mi stock camera app not included !! how to solve ?
riddle1992 said:
mi stock camera app not included !! how to solve ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a1/themes/oreo-mia1-stock-rom-camera-app-custom-t3758543
Best custom rom sonfar ????
bragon01 said:
[PORT][OFFICIAL][ROM][8.1][Pixel Experience][07/06/18]
How to install? I followed every thing and flashed A1 Firmware... When i tried the Oreo Modded TWRP to flash the Rom zip, It says Zip Error... I cannot flash any rom or kernel of A1, when i try to flash zip it detects my device is not A1 so it shows device error... How to fix that?
Click to expand...
Click to collapse
Ritwik Rahman said:
bragon01 said:
[PORT][OFFICIAL][ROM][8.1][Pixel Experience][07/06/18]
How to install? I followed every thing and flashed A1 Firmware... When i tried the Oreo Modded TWRP to flash the Rom zip, It says Zip Error... I cannot flash any rom or kernel of A1, when i try to flash zip it detects my device is not A1 so it shows device error... How to fix that?
Click to expand...
Click to collapse
Maybe you should format your system partition and flash rom immediately
Click to expand...
Click to collapse
bragon01 said:
Ritwik Rahman said:
Maybe you should format your system partition and flash rom immediately
Click to expand...
Click to collapse
I flashed A1 firmware, Wiped Every Partition from recovery (Except Internal Memory), And flashed the rom but it shows Device Error
Click to expand...
Click to collapse
Ritwik Rahman said:
bragon01 said:
I flashed A1 firmware, Wiped Every Partition from recovery (Except Internal Memory), And flashed the rom but it shows Device Error
Click to expand...
Click to collapse
You shoud check system partition because wiping makes it blank and 0 MB.
Check and re-format system partition with ext4
Click to expand...
Click to collapse
Awesome ROM & super clear instruction. Thank you!
This rom is amazing anyone who has boot issues make sure you run that command in twrp
- In TWRP go to Advanced -> Terminal -> Write "a1to5x" -> press Enter