Hi, just received a link to a cm14 build for this phone. Downloaded and flashed it trough twrp, but it doesnt work. Maybe you can help me. I dont know where that build come from. I did wipes (cache,data,dalvik,system and internal storage), then flashed the zip and rebooted. It would load with the bootanimation even with charging led on (almost booted?), but it reboots. I did the same flashing process but flashing 7.0 gapps, and this time, phone would stuck on bootanimation forever. IMPORTANT: TWRP in both cases gave me two errors, you have the screenshot down there.
ar u trying to change twrp? can u share link?
That two commands are not unusual for CM14. Can you provide us source of that link from where you downloaded the ROM.
Sent from my Redmi Note 3 using Tapatalk
Just found the website from the author of the ROM, here you have:
https://sourceforge.net/projects/abhi/files/?source=navbar
Enviado desde mi Redmi Note 3 mediante Tapatalk
no sign for the source download page
Supercharlie25 said:
Just found the website from the author of the ROM, here you have:
https://sourceforge.net/projects/abhi/files/?source=navbar
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
no sign for the source download page
---------- Post added at 05:36 AM ---------- Previous post was at 05:35 AM ----------
ioosis said:
no sign for the source download page
Click to expand...
Click to collapse
try without installing gaps
Hi, I have just tried to flash the ROM. Doesn't boot. If I flash 7.0 GApps, it just shows the CM face, then the ripples appear 3-4 times before hanging and reboots. I wiped dalvik cache and cache after that, bootloop. Flashed back to CM13.
Why u guys r flashing my broken test builds? Keep patience for Sometime. Nought for kenzo is in its way.. Most probably it will released publicly soon
Please stop posting about cm-14.0 and other roms when it is not ready, cm-14 is in staging mode, so be patient
When is the cm 14 ( official nightly) estimated to be released ??
Sent from my Redmi Note 3 using Tapatalk
No deadlines guys, be patient.
Enviado de meu Redmi Note 3 usando Tapatalk
@War_machine28 said:
Why u guys r flashing my broken test builds? Keep patience for Sometime. Nought for kenzo is in its way.. Most probably it will released publicly soon
Click to expand...
Click to collapse
haha, that's because we can't wait! Keep up the good work in delivering CM14 for Kenzo!
Anyone tried this ?
https://androidfilehost.com/?fid=24713784966775139
i tried build 20160909 it booted up but com.android.phone keeps crashing
diamondlol said:
i tried build 20160909 it booted up but com.android.phone keeps crashing
Click to expand...
Click to collapse
Did you do clean install or dirty flash? And any other bug you noticed?
Sent from my Redmi Note 3 using XDA-Developers mobile app
abhimanyu.singh said:
Did you do clean install or dirty flash? And any other bug you noticed?
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
i clean installed without gapps other than that sim doesnt work
diamondlol said:
i clean installed without gapps other than that sim doesnt work
Click to expand...
Click to collapse
may be your efs partition got corrupted.... restore it if you have previously backed up and then check
bravonova said:
may be your efs partition got corrupted.... restore it if you have previously backed up and then check
Click to expand...
Click to collapse
clean installed and then restored efs but nothing changed android.phone still crash now im going back to cm13 because i need the phone
Can somebody publish logcat of cm14 boot failure? I want to discover it.
tank0412 said:
Can somebody publish logcat of cm14 boot failure? I want to discover it.
Click to expand...
Click to collapse
sorry you have to say that I had just returned to cm13
Sent from my Redmi Note 3 using Tapatalk
Related
Hello Users OnePlus2
CyanogenMod 13 Nightly Official for OnePlus2
Download:
https://download.cyanogenmod.org/?device=oneplus2
Log:
https://www.cmxlog.com/13/oneplus2
GAPPS:
www.opengapps.org
What will be the proper steps to flash this?
y7038862 said:
What will be the proper steps to flash this?
Click to expand...
Click to collapse
1. flash Switch_tOS3_H2OSMMv3.zip link to thread: http://forum.xda-developers.com/oneplus-2/general/switch-firmware-twrp-t3371583
2. Wipe System, Data, Cache and Dalvik
3. flash Official CM13
4. flash GAPPS
5. REBOOT and enjoy official cm13
Regards,
flo071
y7038862 said:
What will be the proper steps to flash this?
Click to expand...
Click to collapse
Grarak said:
For anyone who is not sure what to flash
Flash oos beta 2
Reboot to fastboot
Flash TWRP for M bootloader
WIPE
Flash CM
Flash gapps
Reboot
Click to expand...
Click to collapse
From his Twitter account (@Grarak).
did anyone try the official cyanogenmod recovery?
I tried already.running smooth n great
i keep getting error 7, and i have tried every recovery, and the switch firmware zips, even stock recovery any ideas
dnp77 said:
i keep getting error 7, and i have tried every recovery, and the switch firmware zips, even stock recovery any ideas
Click to expand...
Click to collapse
Flash oos 301 beta, factory reset, then flash cm 13 and gapps, reboot. Works great for me.
Sent from my ONE A2003 using Tapatalk
Guys plz tell me will this recovery give me otg..... ? thanks in advance
Anyone is facing issue with fingerprint unlock? I'm coming from unofficial cm13, followed all the steps and home button is working, registering fp it's ok but unlock the phone with it doesn't work..
Oh and another difference from unofficial One, can't set custom slider like all/vibrate/none, need to use a 3rd part app...
Inviato dal mio ONE A2001 utilizzando Tapatalk
Do you guys think it's stable enough for daily driver?
Thanks.
LogicalJunkie549 said:
Do you guys think it's stable enough for daily driver?
Thanks.
Click to expand...
Click to collapse
yes.... i use it since yesterday.... no bugs so far... Performance and. battery life are good :good:
Regards,
flo071
Btw , for any of you guys wondering, FP for 1Password is working for this ROM
Furthermore, FP overall is blazing fast as well
Installed it yesterday night, but had to revert to Skydragon: included root gave fc with titanium backup and missed the "service" command needed by some of my Tasker projects, but when I installed supersu got stuck at 1+ logo at boot
Inviato dal mio ONE A2003 utilizzando Tapatalk
Not working
flo071 said:
1. flash Switch_tOS3_H2OSMMv3.zip link to thread: http://forum.xda-developers.com/oneplus-2/general/switch-firmware-twrp-t3371583
2. Wipe System, Data, Cache and Dalvik
3. flash Official CM13
4. flash GAPPS
5. REBOOT and enjoy official cm13
Regards,
flo071
Click to expand...
Click to collapse
Hey tried this method but its not working.. It keeps showing Patching update unconditionally for hours. I waited for 4 hours but no progress. Please help!!! Thanks in advance!
Prashant Sakpal said:
Hey tried this method but its not working.. It keeps showing Patching update unconditionally for hours. I waited for 4 hours but no progress. Please help!!! Thanks in advance!
Click to expand...
Click to collapse
did you a fully clean flash?
Regards,
flo071
Yes.
flo071 said:
did you a fully clean flash?
Regards,
flo071
Click to expand...
Click to collapse
Yes I did clean flash.
Prashant Sakpal said:
Yes I did clean flash.
Click to expand...
Click to collapse
Try reflashing the ROM, i had no issues
Regards,
flo071
I am OS 3.02 do I need flash any firmware to get cyanogenmod
Sent from my ONE A2005 using XDA-Developers mobile app
Just flash right recovery from Graraks twitter and clean flash rom and gapps.
Hello all,
Does somebody know about official CM 14 if will be soon available for onyx device?
I saw the latest releases are for oneplus 1 and 2 and the only missing device in oneplus is the onyx device.
Thanks in advance for your replies.
It will be available soon..if OnePlus One gets the official nightly then the next is onyx's turn.have patients.
Still some huge bugs to work out with data and camera. If you want a taste of Nougat I've personally tested Aosp-Ext and Tesla-N. Both stable and full functional. Just need footej app for video recording.
Exodusche said:
Still some huge bugs to work out with data and camera. If you want a taste of Nougat I've personally tested Aosp-Ext and Tesla-N. Both stable and full functional. Just need footej app for video recording.
Click to expand...
Click to collapse
Yeah I wanted to check a stable version of Nougat, if its official better than better. O will check both of them. Are they both bor the new bootloader? Thanks for your reply .
ttarze said:
Yeah I wanted to check a stable version of Nougat, if its official better than better. O will check both of them. Are they both bor the new bootloader? Thanks for your reply .
Click to expand...
Click to collapse
Yes. Both are available for the new bootloader
ttarze said:
Yeah I wanted to check a stable version of Nougat, if its official better than better. O will check both of them. Are they both bor the new bootloader? Thanks for your reply .
Click to expand...
Click to collapse
And for added bonus use either BlackReactor or Arsenic kernel. If your on telegram PM me @Exodusche can send you some files.
Where's tesla n for onyx?
Sent from my Pixel Xl using Tapatalk
gurgao said:
Where's tesla n for onyx?
Sent from my Pixel Xl using Tapatalk
Click to expand...
Click to collapse
You can get the links for Tesla N on Google+
Ashwins CM14.1 build is stable, but I went back to Sultans CM13 because the camera on CM14.1 sucks duck
gurgao said:
Where's tesla n for onyx?
Sent from my Pixel Xl using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-x/general/index-thread-oneplus-x-onyx-t3334793
So no volte on onyx?? As it is there for one plus one
Damien3187 said:
So no volte on onyx?? As it is there for one plus one
Click to expand...
Click to collapse
No VoLTE for OnePlus X unless OnePlus release it.
Official CM 14.1 is here ....
https://download.cyanogenmod.org/?device=onyx
I have opx with cm-13.0-20161219-NIGHTLY How I can update it to cm-14.1-20161220-NIGHTLY ? I've tried to update it from the settings, but after reboot phone stuck on first boot screen. Should I do any specific manipulations?
walsash said:
I have opx with cm-13.0-20161219-NIGHTLY How I can update it to cm-14.1-20161220-NIGHTLY ? I've tried to update it from the settings, but after reboot phone stuck on first boot screen. Should I do any specific manipulations?
Click to expand...
Click to collapse
I believe you need to flash it from recovery, and not from Settings.
ubston said:
I believe you need to flash it from recovery, and not from Settings.
Click to expand...
Click to collapse
I've already tried it, from twrp41. And also tried flash cm-14.1-20161220-NIGHTLY-onyx-recovery.img from fastboot.
I think it could run if I make factory reset, but I don't want loose data(reinstall apps, configure it), I just want update. Maybe, I can do backup, then factory reset, then install cm14, recover backup? So, for this variant, what data I need to backup?
Official CM14.1 Nightly is now live for Onyx > https://download.cyanogenmod.org/?device=onyx
walsash said:
I have opx with cm-13.0-20161219-NIGHTLY How I can update it to cm-14.1-20161220-NIGHTLY ? I've tried to update it from the settings, but after reboot phone stuck on first boot screen. Should I do any specific manipulations?
Click to expand...
Click to collapse
I think the kernel is faulty in this version because it doesn't boot for me either. I updated from the last unofficial version to first nightly and got stuck at 1+ logo bootanimation.
Ok, I started it with:
1. http://forum.xda-developers.com/oneplus-x/general/guide-deep-sht-guide-to-upgrade-t3494243
2. http://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
but I think it's laggy, Settings freezes, administrative menu freezes. So, I'm back to last cm13.
walsash said:
Ok, I started it with:
1. http://forum.xda-developers.com/oneplus-x/general/guide-deep-sht-guide-to-upgrade-t3494243
2. http://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
but I think it's laggy, Settings freezes, administrative menu freezes. So, I'm back to last cm13.
Click to expand...
Click to collapse
Is ur bootloader updated
Sent from my Pixel using Tapatalk
Hello,
After flashing a new rom i am stuck after the setup screen when select ur wifi or data it says checking for updates with every rom that i flash i cannot pass the checking for updates... screen
Never had this before, can someone help me out?
bassbounce said:
Hello,
After flashing a new rom i am stuck after the setup screen when select ur wifi or data it says checking for updates with every rom that i flash i cannot pass the checking for updates... screen
Never had this before, can someone help me out?
Click to expand...
Click to collapse
Did you flash BeansGapps? It's always happens to me, but connect to a good internet connection and that's the way to resolve the issue
Sent from my Redmi Note 4 using Tapatalk
sachin n said:
Dis you flash BeansGapps? It's always happens to me, but connect to a good internet connection and that's the way to resolve the issue
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
No i use the opengapps website, i did download the gapps again but same problem.
Wiped everything but the problem dont go away.
I just begun after factory reset xenon hd rom and installing aosp extended + gapps
bassbounce said:
No i use the opengapps website, i did download the gapps again but same problem.
Wiped everything but the problem dont go away.
I just begun after factory reset xenon hd rom and installing aosp extended + gapps
Click to expand...
Click to collapse
Hello there, is your problem resolved? If no then please download older version of gapps and try again .
IMO. The latest version is of 25 August 2017 . Download the older version like 24 August 2017 and give it a try . Thank you .
On MIUI I have the same problem couldn't sign in when I open the playstore
It seems the problem is on the side of Google .
Edit
I finally solve the problem.
I installed gapps 25-8 and resurrection and removed my simcard after that it finally works also on other roms
Facing the same problem.
Device: Redmi 4X.
Tried on 2 ROMs (AEX, RR). But still problem exists.
OpenGApps Mini.
sohan3421 said:
Facing the same problem.
Device: Redmi 4X.
Tried on 2 ROMs (AEX, RR). But still problem exists.
OpenGApps Mini.
Click to expand...
Click to collapse
Apparently this is Redmi note 4 section.. Anyway, did you try BeansGapps??
Try BeansGapps : https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192/
NEW miui_MINote2Global_8.9.13(8.0)MIUI10 Global-Developer for twrp
Multilanguaje
FOR TWRP 8.9.6 – miui_MINote2Global_8.9.13(8.0): http://bigota.d.miui.com/8.9.13/miui_MINote2Global_8.9.13_4cc99774f3_8.0.zip
Regards
Got it via official channel
kmanilpillai said:
Got it via official channel
Click to expand...
Click to collapse
Isn't it shut down yet? That's what i see at least
Andrikkos said:
Isn't it shut down yet? That's what i see at least
Click to expand...
Click to collapse
Yes.. I got it through OTA.
Sorry for the confusion...
also
can get it through:
http://en.miui.com/getrom.php?m=yes
Installed. Works Great . Nothing better than an official stock.
Hi, I have pixel expirience installed and I got erorr when trying install this image wia TWRP:
"Updater process ended with ERROR: 7
Any ideas how to fix this?
Thanks in advance.
You need to flash fastboot rom.. will lose all your data if done.
think so..
kmanilpillai said:
You need to flash fastboot rom.. will lose all your data if done.
think so..
Click to expand...
Click to collapse
I am tried. But got another error. "Length can't be less than zero" From MiFlash.
I think this flash might require another version of firmware than my. What version is needed for this rom?
Good morning friends!
I installed Rom Beta MIUI 10 Global 8.7.5 in TWRP 3.2.2
However, the system does not boot even though I'm formatting with TWRP.
Would there be some other method for ROM to reboot?
kmanilpillai said:
You need to flash fastboot rom.. will lose all your data if done.
think so..
Click to expand...
Click to collapse
do you have any notification sound issues? It doesn't really ring when a notification arrive. And its not on silence..
Is it MIUI 10 For Xiaomi Redmi Note 2?
Update From 9.5.4.0..?
OnlyGreen said:
Is it MIUI 10 For Xiaomi Redmi Note 2?
Update From 9.5.4.0..?
Click to expand...
Click to collapse
MIUI10 yes...Global-Developer
Update From 9.5.4.0..? Nooooooo
Alexurso said:
Good morning friends!
I installed Rom Beta MIUI 10 Global 8.7.5 in TWRP 3.2.2
However, the system does not boot even though I'm formatting with TWRP.
Would there be some other method for ROM to reboot?
Click to expand...
Click to collapse
Can anyone help me with this question?
---------- Post added at 05:42 PM ---------- Previous post was at 05:38 PM ----------
I install MIUI 10, do the procedure by installing TWRP, restart Smatphone via TWRP, install SuperSU, format the System. But when I restart my Smartphone, it does not leave the startup screen
Can I dirty flash it over global stable?
jaran.x said:
Can I dirty flash it over global stable?
Click to expand...
Click to collapse
You will encounter some problems... The recommended way is to clean flash it
Can we flash this with miflash without unlocking bootloader?
NEW miui_MINote2Global_8.7.12(8.0)MIUI10 Download in first post
OnlyGreen said:
Is it MIUI 10 For Xiaomi Redmi Note 2?
Update From 9.5.4.0..?
Click to expand...
Click to collapse
Not REDMI!!
Andrikkos said:
do you have any notification sound issues? It doesn't really ring when a notification arrive. And its not on silence..
Click to expand...
Click to collapse
No issues yet.. so far so good..
vcx77 said:
NEW miui_MINote2Global_8.7.12(8.0)MIUI10 Global-Developer
Multilanguaje
FOR TWRP 8.7.5 – miui_MINote2Global_8.7.12(8.0):
Regards
Click to expand...
Click to collapse
Can anybody help me ?
TWRP return errors,
1) this package is for scorpio devices, this device is " " .
2) twrp no digest file found.
Now Installed MiUI9.5 developer edition.
I found this OnePlus 7 Pro Rom which boots on Mi9 but has some issues. All credits to the creator. Maybe someone can help fixing the issues
https://androidfilehost.com/?a=show&w=files&flid=296331
Forgot to say the ROM is OOS7P_958_V2
How to flash
1. Use new Eu Rom fw+vendor, like 10.7.19
2. Wipe all except internal storage
3. Flash extracted OOS7P image to system
4. Flash Permissiver_v4.zip
What it doesn't work (this what i found)
1. AOD
2. Sounds through speaker are muffled.
3. Finger Print
4. Face unlock
Flashing this ROM at your own responsibility.
Thank you.
Sent from my MI 9 using Tapatalk
Forgot to say the ROM is OOS7P_958_V2. Sorry.
Sent from my MI 9 using Tapatalk
For following ?
https://androidfilehost.com/?fid=6006931924117916784
OOS7P_959_V1
This is really cool. Looking forward to a good functioning port.
Did someone try this?
GIPAQ said:
Forgot to say the ROM is OOS7P_958_V2. Sorry.
Click to expand...
Click to collapse
Ok but from where u found this? Can u share link to those site or Telegram Group if Available?
Found. Its from Redmi Note 7 Pro.
Rajeev said:
Ok but from where u found this? Can u share link to those site or Telegram Group if Available?
Found. Its from Redmi Note 7 Pro.
Click to expand...
Click to collapse
Hi,
Yes, its from Note 7 Pro. I have tried multiple vendors but same issues as in OP persist. The performance of the Rom is amazing.
Maybe someone can produce a patch to resolve those issues. I have also tried global mi 9 vendor files but it boot loops.
Telegram discussion for Note 7: https://t.me/lavendergsi
Sent from my MI 9 using Tapatalk
GIPAQ said:
Hi,
Yes, its from Note 7 Pro. I have tried multiple vendors but same issues as in OP persist. The performance of the Rom is amazing.
Maybe someone can produce a patch to resolve those issues. I have also tried global mi 9 vendor files but it boot loops.
Telegram discussion for Note 7: https://t.me/lavendergsi
Click to expand...
Click to collapse
Did u tried OP7 port.? And i read some fixes for Fingerprint available in https://treble.andro.plus/ here.
Rajeev said:
Did u tried OP7 port.? And i read some fixes for Fingerprint available in https://treble.andro.plus/ here.
Click to expand...
Click to collapse
Which OP7 port are you referring to? I have installed a FP patch but it did not help.
Sent from my MI 9 using Tapatalk
GIPAQ said:
Which OP7 port are you referring to? I have installed a FP patch but it did not help.
Click to expand...
Click to collapse
Its from Redmi Note 7. But i think its also waste..
Rajeev said:
Its from Redmi Note 7. But i think its also waste..
Click to expand...
Click to collapse
I tried that also. Same issues as the 7 Pro rom.
Sent from my MI 9 using Tapatalk
GIPAQ said:
I tried that also. Same issues as the 7 Pro rom.
Click to expand...
Click to collapse
I have stopped all rom flashing and settled in eu rom. No more flashing. Will try if Masik Rom available for Mi9
OP, where did you find this? Curious about new updates..