So, I have a dilemma. I am currently S-ON running TACHYON 1.2 (Android 4.3)
HBOOT 2.28.0000
Radio 2.23.10.0123/4
I updated the hboot and radio while S-ON. Now, I've decided I'd like to go S-OFF. According to JuopunutBear I need to be on a stock RUU for their S-OFF to work. I tried running the newest ICS RUU a few weeks ago and found that it would just error out when it was checking the file because the radios and hboot on the phone were newer than the ones on the RUU. Can I step backwards in HBOOT versions whlie S-ON or have I kind of screwed myself? Or is there a better option I haven't thought about?
Thanks
Just install a stock Rom to run s-off program. You are on a stock hboot, so no problem there.
Sent from my DNA using my mind.
Uzephi said:
Just install a stock Rom to run s-off program. You are on a stock hboot, so no problem there.
Sent from my DNA using my mind.
Click to expand...
Click to collapse
It's a stock hboot, yes. But the RUU won't run because it is an older version hboot.
You need s-off to downgrade. Just install a stock based Rom that is rooted and run s-off procedure. You will have no issues. After s-off if you want, you can ruu
Sent from my DNA using my mind.
Step 1 from Unlimited: Verify - You are on Stock RUU (not FreshROM, Stock Rooted, HarmonyROM - none of these will work!)
They say not to be rooted or anything. What difference does it make?
Also, what do you mean by "stock rom"? Is there a stock rom I can install that is not an RUU? (maybe that's a dumb question but I don't know lol)
jeff925 said:
Step 1 from Unlimited: Verify - You are on Stock RUU (not FreshROM, Stock Rooted, HarmonyROM - none of these will work!)
They say not to be rooted or anything. What difference does it make?
Also, what do you mean by "stock rom"? Is there a stock rom I can install that is not an RUU? (maybe that's a dumb question but I don't know lol)
Click to expand...
Click to collapse
A stock rooted RUU would work. I was in your predicament once. First, do a nandroid backup then use this guide it'll get you to s-off. If you want to downgrade, then use this guide to accomplish this.
Thanks guys for the help. Installed the rom listed in the guide and it worked great. S-OFF now!! (Took me long enough...I've had the phone for 2 years!)
It installed JuopunutBear's hboot but whatever. I'd probably rather stick with a stock hboot but I can do that later.
Restored my nandroid backup and I'm back up and running like I never left.
Just flash this ROM and boot image, and you should be able to S-OFF, I can't remember if stock recovery is needed but that can be flashed separately as well if needed, but I don't think it is.
http://forum.xda-developers.com/showthread.php?t=2260154
So, All was well until I decided to flash the stock hboot back to the phone. I put the file on the sd card and renamed it ph98img.zip and flashed it in fastboot. It said it was successful and that I was running hboot 2.28 and radio 2.23.10.0123/4. Then I rebooted and it hung up at the white screen with green htc logo. I pulled the battery and rebooted holding the power and volume buttons. It booted to fastboot so I tried a few things. I tried flashing a recovery but it said that remote was not allowed and failed. Then I tried opening the recovery I already had on the phone from fastboot and it gave me the software download icon. Nothing happened so I pulled the battery and tried to boot back to fastboot. This time it wouldn't even get to fastboot. The white screen with HTC logo comes up and then the screen goes blank. Then the software download icon comes up and then shortly there after a red triangle with an exclamation point takes its place.
That went downhill fast! Any suggestions?
EDIT: Pulling the SD card allows me to get back into fastboot! But I'm still not sure what to do. Is it because my bootloader is locked?
jeff925 said:
So, All was well until I decided to flash the stock hboot back to the phone. I put the file on the sd card and renamed it ph98img.zip and flashed it in fastboot. It said it was successful and that I was running hboot 2.28 and radio 2.23.10.0123/4. Then I rebooted and it hung up at the white screen with green htc logo. I pulled the battery and rebooted holding the power and volume buttons. It booted to fastboot so I tried a few things. I tried flashing a recovery but it said that remote was not allowed and failed. Then I tried opening the recovery I already had on the phone from fastboot and it gave me the software download icon. Nothing happened so I pulled the battery and tried to boot back to fastboot. This time it wouldn't even get to fastboot. The white screen with HTC logo comes up and then the screen goes blank. Then the software download icon comes up and then shortly there after a red triangle with an exclamation point takes its place.
That went downhill fast! Any suggestions?
EDIT: Pulling the SD card allows me to get back into fastboot! But I'm still not sure what to do. Is it because my bootloader is locked?
Click to expand...
Click to collapse
In fastboot does it say s-off? Try manually flashing the boot.img by extracting it. If you haven't setup enviroment variable for fastboot put the boot.img in the same directory as fastboot.exe and use command prompt by typing
Code:
cd C:\Android\platform-tools (or wherever it is for you)
Then type
Code:
fastboot flash boot boot.img
I was able to put an RUU on another sd card and flash that. So now I'm on ICS 4.03.605.2 and running. But I still haven't solved my recovery problems.
According to this thread: androidforums.com/rezound-all-things-root/550408-s-off-guide-info-return-stock.html
I can either use juopunutbear's hboot (which I just flashed over the top of) to flash a new recovery or I can compile a recovery in a ph98img file (which I don't know how to do or want to do).
My question is: What happens if I unlock my bootloader while S-OFF? (Yes, it says s-off on the bootloader screen.) Will that solve my problem or do I have to go back to juopunutbear's hboot?
jeff925 said:
I was able to put an RUU on another sd card and flash that. So now I'm on ICS 4.03.605.2 and running. But I still haven't solved my recovery problems.
According to this thread: androidforums.com/rezound-all-things-root/550408-s-off-guide-info-return-stock.html
I can either use juopunutbear's hboot (which I just flashed over the top of) to flash a new recovery or I can compile a recovery in a ph98img file (which I don't know how to do or want to do).
My question is: What happens if I unlock my bootloader while S-OFF? (Yes, it says s-off on the bootloader screen.) Will that solve my problem or do I have to go back to juopunutbear's hboot?
Click to expand...
Click to collapse
You can unlock when S-OFF, but there is no reason to, you can get a PH98img.zip of CWM here: http://forum.xda-developers.com/showthread.php?t=1914215 or TWRP here: http://forum.xda-developers.com/showthread.php?t=1902381 and just copy it to your sd card (remember to name it exactly PH98IMG.zip, beware the Windoze "double zip" issue) then pop it in the phone, boot into Hboot with the USB disconnected and it should recognize it and flash either CWM or TWRP. from there you can flash ANYTHING you want, being S-OFF with custom recovery allows you to flash anything, no fastboot commands required.
Also, since you are S-OFF, your Hboot is mostly irrelevant, but should be the matching version to your radios... an engineered hboot (like Juopunutbears) would allow fastboot commands well locked, but fastboot isn't generally needed once S-OFF has been obtained...
Try this. no wire even, works great.
http://forum.xda-developers.com/showthread.php?p=48911002#post48911002
i am on hboot 2.25 though. im thinking of updating my hboot still researching how exactly.
4218kris said:
Try this. no wire even, works great.
http://forum.xda-developers.com/showthread.php?p=48911002#post48911002
i am on hboot 2.25 though. im thinking of updating my hboot still researching how exactly.
Click to expand...
Click to collapse
i can help with that....its pretty easy if your already s-off
---------- Post added at 03:26 AM ---------- Previous post was at 03:22 AM ----------
jeff925 said:
I was able to put an RUU on another sd card and flash that. So now I'm on ICS 4.03.605.2 and running. But I still haven't solved my recovery problems.
According to this thread: androidforums.com/rezound-all-things-root/550408-s-off-guide-info-return-stock.html
I can either use juopunutbear's hboot (which I just flashed over the top of) to flash a new recovery or I can compile a recovery in a ph98img file (which I don't know how to do or want to do).
My question is: What happens if I unlock my bootloader while S-OFF? (Yes, it says s-off on the bootloader screen.) Will that solve my problem or do I have to go back to juopunutbear's hboot?
Click to expand...
Click to collapse
and what recovery problems are you having....flashing an hboot will not give you a recovery...and an ruu is an exe file not a ph98img file...those are OTA's.....if you need pure stock i can easily help you obtain it....i just need to know what exactly your trying to achieve
REV3NT3CH said:
i can help with that....its pretty easy if your already s-off
---------- Post added at 03:26 AM ---------- Previous post was at 03:22 AM ----------
Click to expand...
Click to collapse
i believe i can flash hboot with a ph98img yea? can you link me to the best/newest 2.28 i think.
4218kris said:
i believe i can flash hboot with a ph98img yea? can you link me to the best/newest 2.28 i think.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40767819&postcount=33
4218kris said:
i believe i can flash hboot with a ph98img yea? can you link me to the best/newest 2.28 i think.
Click to expand...
Click to collapse
that one or the this 2nd ph98img in my downgrade/upgrade guide work as well...that one is just radios and hboot....doesnt come with stock <3e> recovery
REV3NT3CH said:
if you need pure stock i can easily help you obtain it....i just need to know what exactly your trying to achieve
Click to expand...
Click to collapse
Hey REV3NT3CH,
So, thanks to the help of so many in these parts, including you, I now think I'm S-Off and I'm very interested in bringing my phone up to the latest, completely stock OTA ROM. Can you help me with that?
Thanks!
cheers,
john
jrredho said:
Hey REV3NT3CH,
So, thanks to the help of so many in these parts, including you, I now think I'm S-Off and I'm very interested in bringing my phone up to the latest, completely stock OTA ROM. Can you help me with that?
Thanks!
cheers,
john
Click to expand...
Click to collapse
when you boot into your bootloader...does your hboot now say S-OFF....if so i can give you everything you need and what id suggest doing just prior to doing it
REV3NT3CH said:
when you boot into your bootloader...does your hboot now say S-OFF..
Click to expand...
Click to collapse
Yes it does.
REV3NT3CH said:
.if so i can give you everything you need and what id suggest doing just prior to doing it
Click to expand...
Click to collapse
That would be fantastic!
Thanks,
John
Related
I'm struggling with all the terminology and methods with flashing. Basically I just wanted root, so I read several different guides and got a rooted status and managed to install the Amon Ra recovery. However my bootloader (also called HBOOT - is that correct?) shows tampered / unlocked now. Basically, I want to flash back to the most current build and try again.
Would the link on the Android Police forums to download RUU 4.03.605.2 be latest Verizon build as if it were fresh out of the box?
I checked on the wiki, but didn't see anything for the Rezound there.
Also, to use this utility, I relock my bootloader using HTCDev and then move this zipped file to my sd card and reboot to the bootloader either using adb or the power + volume down, correct? It will see the zip file and begin flashing or do I run an executable from my PC with the phone connected? I'm not S-Off because I figured that is way above my head at this point.
I appreciate any help anyone can offer.
The tampered just means you have a custom recovery like Amon Ra installed.
Sent from my ADR6425LVW using xda app-developers app
oatlord said:
I'm struggling with all the terminology and methods with flashing. Basically I just wanted root, so I read several different guides and got a rooted status and managed to install the Amon Ra recovery. However my bootloader (also called HBOOT - is that correct?) shows tampered / unlocked now. Basically, I want to flash back to the most current build and try again.
Would the link on the Android Police forums to download RUU 4.03.605.2 be latest Verizon build as if it were fresh out of the box?
I checked on the wiki, but didn't see anything for the Rezound there.
Also, to use this utility, I relock my bootloader using HTCDev and then move this zipped file to my sd card and reboot to the bootloader either using adb or the power + volume down, correct? It will see the zip file and begin flashing or do I run an executable from my PC with the phone connected? I'm not S-Off because I figured that is way above my head at this point.
I appreciate any help anyone can offer.
Click to expand...
Click to collapse
4.03.605..2 is the latest vzw build.
jbh00jh said:
4.03.605..2 is the latest vzw build.
Click to expand...
Click to collapse
If I want to load that RUU, do I have to relock my bootloader? Will I be able to load the file from the Android Police forum without being S-OFF since I've rooted and loaded a recovery?
oatlord said:
If I want to load that RUU, do I have to relock my bootloader? Will I be able to load the file from the Android Police forum without being S-OFF since I've rooted and loaded a recovery?
Click to expand...
Click to collapse
Having S-OFF negates the need to relock your bootloader.
You should be able to flash the "RUU" zip file with your phone in its current condition.
If you do some research in this section in the S-OFF threads, you'll get some good info about not re locking after s-off.
Re-locking is only necessary if you don't have s-off.
Sent from my ADR6425LVW using Tapatalk 2
to reinstall the RUU, first make sure you have fastboot on your PC and your phone is in the fastboot menu of the bootloader and connected to your PC. It should say "fastboot USB". (If you don't have the HTC drivers installed, download HTC Sync 3.0 and that should install it. I haven't gotten it to work on Windows 8 so if you use Windows 8 use these drivers)
Open a command prompt, change the directory to where your fastboot.exe is (example: cd c:\fastboot_directory). Type in 'fastboot oem lock'. Your phone will restart, then boot up. Turn it off, reboot to the bootloader and make sure it says *RELOCKED* on the top. Then, go back to fastboot and in your cmd window, type in 'fastboot oem rebootRUU'. Your phone will reboot and show a black screen with a grey HTC logo. Copy the RUU (doesn't matter if it's named PH98IMG.zip or something else) into the same folder as fastboot.exe and type in 'fastboot flash zip ruu_zip_name.zip' (obviously replacing ruu_zip_name.zip with the zip's actual name). The terminal will start sending the zip and details will be displayed on your computer screen. Your phone will also have a progress bar. Once the terminal on your computer says it's finished, you can reboot your phone.
I am currently S-On, unlocked, running Newts One XXX with the Global OTA (4.03.605) Sense 4 Kernel. I would now like to get the 4.03.605.2 firmware installed. Would the procedure described above work for my situation or is there another method I can use.
My next leap is to go S-off but for now I would just like to get the firmware updated before reflashing Newts.
Thanks in advance.
Yes, you can use the above method fine. However, going S-Off is very easy. It seems like a daunting task, but if you read the directions thoroughly it is very easy. I used the .5 version of Juopunutbear and it worked without a hitch. You are already unlocked and rooted, so if you S-Off, you won't have to do it all over again. From there you can flash the RUU, flash a FLASHABLE version of AR 3.15, then reflash any rom that you want. You will only get the benefit from global with roms that are built aroung the .2 base, but you will get updated radios. I haven't honestly noticed much of a difference with the new radios though.
layneja said:
I am currently S-On, unlocked, running Newts One XXX with the Global OTA (4.03.605) Sense 4 Kernel. I would now like to get the 4.03.605.2 firmware installed. Would the procedure described above work for my situation or is there another method I can use.
My next leap is to go S-off but for now I would just like to get the firmware updated before reflashing Newts.
Thanks in advance.
Click to expand...
Click to collapse
Flash stock recovery here's a link http://www.mediafire.com/?wb21d2gdurui2c6 then lock bootloader. (Fastboot OEM lock)
After locking bootloader(cuz your s-on) rename the ruu you downloaded from android police To PH98IMG put on your sd return sd phone boot into bootloader run update, if it stops and powers off mid update remove battery and start it again, It flashed the hboot first then you gotta go back In And finish the update.
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
---------- Post added at 11:41 AM ---------- Previous post was at 10:59 AM ----------
layneja said:
I am currently S-On, unlocked, running Newts One XXX with the Global OTA (4.03.605) Sense 4 Kernel. I would now like to get the 4.03.605.2 firmware installed. Would the procedure described above work for my situation or is there another method I can use.
My next leap is to go S-off but for now I would just like to get the firmware updated before reflashing Newts.
Thanks in advance.
Click to expand...
Click to collapse
Also to avoid any problems do a factory reset in hboot after update is installed. Being that we're s-on when we re-unlock it does it for us but I've heard some people are having problems after the ruu if they didn't FDR while on stock recovery.. just a heads up
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
famouscollin said:
Flash stock recovery here's a link (removed cause I'm too new) then lock bootloader. (Fastboot OEM lock)
After locking bootloader(cuz your s-on) rename the ruu you downloaded from android police To PH98IMG put on your sd return sd phone boot into bootloader run update, if it stops and powers off mid update remove battery and start it again, It flashed the hboot first then you gotta go back In And finish the update.
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
---------- Post added at 11:41 AM ---------- Previous post was at 10:59 AM ----------
Also to avoid any problems do a factory reset in hboot after update is installed. Being that we're s-on when we re-unlock it does it for us but I've heard some people are having problems after the ruu if they didn't FDR while on stock recovery.. just a heads up
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
Click to expand...
Click to collapse
Just to clarify: when you reboot using "adb reboot" or power + volume down, are you booting into the bootloader or hboot? I've read the guides but still a little confused there.
Also, what does the stock recovery do versus something like Amon Ra? Does the stock recovery allow for creating backups and what-not? Sorry to be a total noob here. I can bake cookies or something for you all for your help, hehe.
WookieFan said:
Having S-OFF negates the need to relock your bootloader.
You should be able to flash the "RUU" zip file with your phone in its current condition.
If you do some research in this section in the S-OFF threads, you'll get some good info about not re locking after s-off.
Re-locking is only necessary if you don't have s-off.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
if you're s-off you shouldn't have to unlock.
---------- Post added at 07:17 PM ---------- Previous post was at 07:11 PM ----------
oatlord said:
Just to clarify: when you reboot using "adb reboot" or power + volume down, are you booting into the bootloader or hboot? I've read the guides but still a little confused there.
Also, what does the stock recovery do versus something like Amon Ra? Does the stock recovery allow for creating backups and what-not? Sorry to be a total noob here. I can bake cookies or something for you all for your help, hehe.
Click to expand...
Click to collapse
The bootloader is the hboot. You power on holding vol down to get there.
The stock recovery does not allow you to create backups, or do much at all I'm pretty sure. That is why we have custom ones.
If i helped throw me a thanks
iamwalterwhite said:
Yes, you can use the above method fine. However, going S-Off is very easy. It seems like a daunting task, but if you read the directions thoroughly it is very easy. I used the .5 version of Juopunutbear and it worked without a hitch. You are already unlocked and rooted, so if you S-Off, you won't have to do it all over again. From there you can flash the RUU, flash a FLASHABLE version of AR 3.15, then reflash any rom that you want. You will only get the benefit from global with roms that are built aroung the .2 base, but you will get updated radios. I haven't honestly noticed much of a difference with the new radios though.
Click to expand...
Click to collapse
Do you mean flash the RUU in the bootloader and then the recovery also in bootloader? i only ask cause im at school and i forgot my microsd adapter so i cant rename the zips so that I can flash both of them from there, but if i can do it from recovery then im set
xxtsxx said:
Do you mean flash the RUU in the bootloader and then the recovery also in bootloader? i only ask cause im at school and i forgot my microsd adapter so i cant rename the zips so that I can flash both of them from there, but if i can do it from recovery then im set
Click to expand...
Click to collapse
Sorry that you never got an answer to this. Yes, you should flash both recovery (stock) and the RUU as PH98IMG zip files. Wait to start this process until you have a pc/sd card reader available. Trying this without those basic tools is going to make this a frustrating process for you.
Sent from my ADR6425LVW using Tapatalk 2
Thanks in advance for any help. I know there are a ton of posts about issues like this, but it seems the more I read the more confused I get. Anyway, if someone can help clarify my situation that would be great.
I just got a Rezound after about 18 months with a Thunderbolt and the steps to root and s-off are obviously different. I rooted using the "Scottys noob friendly guide" and that went well. Next, I attempted to get S-off using Control Bear and the wire trick. After several attempts I got the wire trick timing correct, was no longer sober! Then here is where I think things got screwed up. The Control Bear program did not ask if I wanted to install a custom hboot it just sort of started running on its own. I let it do its thing, the phone rebooted into Hboot and it now reads:
***TAMPERED***
***LOCKED***
VIGOR PUT SHIP S-OFF RL
H-BOOT-2.25.000
RADIO-1.22.10.0421r/1.22.10.0424R
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012, 16:47:46
Long story short I do not believe that Control Bear successfully installed the custom hboot. I can no longer fastboot boot or flashboot flash a revovery image (recovery-ra-vigor-3.15-gnm). I am able to boot into the stock ROM, I am still rooted, I am S-off, but without being able to flash/install a revovery image I cannot flash anything. I feel like I am stuck. I thought going S-off and rooted would give me total freedom with the phone.
When I run the command "fastboot boot recovery-ra-vigor-3.15-gnm.img" here is what I get:
downloading 'boot.img'...
OKAY [ 1.411s]
booting...
FAILED (remote: not allowed)
finished. total time: 1.413s
Before I went through these steps I did not read anywhere that going S-off would relock hboot/bootloader to a point that I would not be able to flash anything.
Where did I go wrong? What did I miss?
One solution seems to point towards manually installing the custom JB hboot, but at this point I do not want to haphazardly make any more changes that could potentially leave me with a brick.
Here are my questions:
How do I install a recovery now that I am LOCKED, S-OFF, & ROOTED?
Will flashing the custom JB hboot at this point fix my problem or leave me with a brick?
I own the the phone, it is never going in for a warranty issue, so the TAMPERED flag does not bother me. I would just like to be ale to install AR recovery and go on my happy crack-flashing way. Any help or advice would be appreciated.
Thanks!
You will have to unlock the bootloader to flash a recovery still.
Or you can flash a custom hboot that will allow you to use fastboot commands while locked. That's what the jbear hboot does. Just make sure you flash the jbear hboot version that matches your current hboot version.
Sent from my ADR6425LVW using xda app-developers app
Squirrel1620 said:
You will have to unlock the bootloader to flash a recovery still.
Click to expand...
Click to collapse
I am S-off and locked and with stock hboot, I can flash anything with out unlocking the hboot
My Hboot reads:
****LOCKED***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.227.0000
mclass55 said:
I am S-off and locked and with stock hboot, I can flash anything with out unlocking the hboot
My Hboot reads:
****LOCKED***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.227.0000
Click to expand...
Click to collapse
Yeah I know, I had the same problem after s off, I still had to unlock the hboot to get the recovery to flash.
You could always install the recovery via PH98IMG.zip
Sent from my ADR6425LVW using xda app-developers app
Squirrel1620 said:
You could always install the recovery via PH98IMG.zip
Click to expand...
Click to collapse
Thats how I flash recovery, via PH98IMG.zip
Poster tswltd, you should try flash recovery that way, via PH98IMG.zip
http://forum.xda-developers.com/showthread.php?t=1864631
There is a link in this thread with an hboot flashable zip of amon ra. You didn't do anything wrong. The juopunutbear method has a locked hboot, so fastboot flashing is a no go. You can use a hex edited 2.27 hboot by vinyl freak so you can regain fastboot flashing, but it's pretty unnecessary once you s-off.
---------- Post added at 01:39 PM ---------- Previous post was at 01:36 PM ----------
By the way, you really should look into running a newer RUU. You still have GB radios, and they're pretty dated.
iamwalterwhite said:
http://forum.xda-developers.com/showthread.php?t=1864631
There is a link in this thread with an hboot flashable zip of amon ra. You didn't do anything wrong. The juopunutbear method has a locked hboot, so fastboot flashing is a no go. You can use a hex edited 2.27 hboot by vinyl freak so you can regain fastboot flashing, but it's pretty unnecessary once you s-off.
---------- Post added at 01:39 PM ---------- Previous post was at 01:36 PM ----------
By the way, you really should look into running a newer RUU. You still have GB radios, and they're pretty dated.
Click to expand...
Click to collapse
Hey Thanks everybody for responding so quickly!
OK, just so I understand things correctly:
1) I can put the latest amon ra PH98IMG.zip on the root of my sd card, boot into bootloader, let it do its thing, then I will then have a working recovery that I can use to flash, backup, etc?
2) I do not need to update a custom hboot, but I can if I want and should cause no ill effects to my phone? For example follow the direction on the Unlimited.IO website for flashing thier custom hboot?
3) My radios are outdated? That stinks. Assurion just sent me this Rezound brand new and in the box a few days ago to replace a replacement Tbolt that went bad. It was running ICS, but you say the radios are old. Hmm, could you suggest an RUU that I should run and do I simply rename the RUU PH98IMG.zip, but it on the root of my SD card, bootloader and let it update? Seems straight forward enough. The way i understand it flashing an RUU will not remove S-off, but will it remove root and will I then have to unlock again through HTCdev?
Thanks agaiin for helping this new Rezound owner out!
tswltd said:
Hey Thanks everybody for responding so quickly!
OK, just so I understand things correctly:
1) I can put the latest amon ra PH98IMG.zip on the root of my sd card, boot into bootloader, let it do its thing, then I will then have a working recovery that I can use to flash, backup, etc?
2) I do not need to update a custom hboot, but I can if I want and should cause no ill effects to my phone? For example follow the direction on the Unlimited.IO website for flashing thier custom hboot?
3) My radios are outdated? That stinks. Assurion just sent me this Rezound brand new and in the box a few days ago to replace a replacement Tbolt that went bad. It was running ICS, but you say the radios are old. Hmm, could you suggest an RUU that I should run and do I simply rename the RUU PH98IMG.zip, but it on the root of my SD card, bootloader and let it update? Seems straight forward enough. The way i understand it flashing an RUU will not remove S-off, but will it remove root and will I then have to unlock again through HTCdev?
Thanks agaiin for helping this new Rezound owner out!
Click to expand...
Click to collapse
1) yes
2) yes
3) yes your radios are old, but you can stay that way..alot of rezounds out there are running old firmware.
here is a website that has all the RUU for the rezound http://shipped-roms.com/index.php?category=android&model=Vigor
yes, the ones with zip in the title can been put on the SD card as "PH98IMG.zip" and it will update everything. The ones listed on that website as "EXE" are run through windows while your computer is tethered to phone.
yes flash a RUU will not remove S-off, but will remove root and replace Hboot and recovery with stock
Squirrel1620 said:
Or you can flash a custom hboot that will allow you to use fastboot commands while locked. That's what the jbear hboot does. Just make sure you flash the jbear hboot version that matches your current hboot version.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Would you please clarify one more question?
My current hboot version is HBOOT-2.25.000 and my firmware version is 3.14.605.12 71ORD. Does this mean I would need to to install JB ICS 3.14.605.5 HBOOT - 2.25.2525?
Thanks again.
tswltd said:
1) I can put the latest amon ra PH98IMG.zip on the root of my sd card, boot into bootloader, let it do its thing, then I will then have a working recovery that I can use to flash, backup, etc?
2) I do not need to update a custom hboot, but I can if I want and should cause no ill effects to my phone? For example follow the direction on the Unlimited.IO website for flashing thier custom hboot?
3) My radios are outdated? That stinks. Assurion just sent me this Rezound brand new and in the box a few days ago to replace a replacement Tbolt that went bad. It was running ICS, but you say the radios are old. Hmm, could you suggest an RUU that I should run and do I simply rename the RUU PH98IMG.zip, but it on the root of my SD card, bootloader and let it update? Seems straight forward enough. The way i understand it flashing an RUU will not remove S-off, but will it remove root and will I then have to unlock again through HTCdev?
Click to expand...
Click to collapse
1. Yes. However, I would recommend TWRP recovery. Amon Ra is also great though, so if you have any doubts about using a different recovery, stay with AR for now.
2. Here are some hboots based on the latest release. The only difference between them and stock is that they say different things at the top instead of Locked. After you flash the RUU, flash the one you choose as PH98IMG.zip through bootloader, just like you flashed the RUU.
3. Here is the latest RUU. The method you described for flashing it is correct, but to be safe, you can do it twice. The RUU will replace your hboot and your recovery, and thereby remove root. It will also wipe your internal memory, so back it up if you keep anything there. You will not need to unlock with HTCDev - you will never need to do that once you're S-Off. After you flash the RUU, you will only need to flash the unlocked hboot to re-unlock your bootloader (step 2), and then flash the recovery (step 1). Then, from recovery, you can flash ROMs, kernels, mods, etc.
tswltd said:
Would you please clarify one more question?
My current hboot version is HBOOT-2.25.000 and my firmware version is 3.14.605.12 71ORD. Does this mean I would need to to install JB ICS 3.14.605.5 HBOOT - 2.25.2525?
Thanks again.
Click to expand...
Click to collapse
Yes that is the right JuopunutBear HBOOT if you want to install it. But you dont really need it.
And after a second look of your radio and firmware, you do have the latest over the air release, only thing newer is the Global RUU...PH98IMG_ICS_4.03.605.2.zip
If I was you, I would just flash the recovery, to get root
Thanks for the help folks. I have succesfully reinstalled AR recovery now going to try to flash my first ROM as S-Off!
mclass55 said:
Yes that is the right JuopunutBear HBOOT if you want to install it. But you dont really need it.
And after a second look of your radio and firmware, you do have the latest over the air release, only thing newer is the Global RUU...PH98IMG_ICS_4.03.605.2.zip
If I was you, I would just flash the recovery, to get root
Click to expand...
Click to collapse
You're absolutely right. The radios that he has are from the ICS ota. That was my fault. The newest radios are from the unofficial global leak.
---------- Post added at 03:53 PM ---------- Previous post was at 03:52 PM ----------
tswltd said:
Thanks for the help folks. I have succesfully reinstalled AR recovery now going to try to flash my first ROM as S-Off!
Click to expand...
Click to collapse
Glad you got it working. Happy flashing!
Yeah, All is good. Recovery installed and a newly flashed CM9! Had been waiting forever for ICS to come to my old Tbolt and now that I have the Rezound this is sweet sweet butter... I am really looking forward to learning what this phone is all about and flashing all of these ROMS, that may be old news for a lot of you all, but are brand new to me!
Thanks again.
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
What happens when you try to run ruu
Sent from my EVO using xda app-developers app
PathogenVirdae said:
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
Click to expand...
Click to collapse
Update your twrp to 2.3.3.0 or if you want to return to stock you have to relock your bootloader
Sent from my PoS MoPho
TWRP won't take the update for whatever reason, and I can't get fastboot to work over this machine, so I'm thinking about running linux to get into the phone a little easier (hopefully.) I either have to wait til I can use my roommates machine, or start installing a dual boot
Have you tried goomanager to update twrp?
Yea, it downloads the file, gives a message stating it has been installed, then it does nothing. No reboot. when I manually reboot into recovery, it still sits at previous version.
Do you have adb setup on your PC? Also do you have the correct drivers installed ?
#Root-Hack_Mod*Always=SG3
Ok, so finally got my fastboot to work
"Fastboot oem lock"
Worked. Awesome...now it's stuck in a bootloader loop. Won't let me into recovery, but I can still get to fastboot. I can't get to recovery, factory reset, etc. just hboot and fastboot.
screen shows tampered relocked and security warning.
Any ideas? I can get it to flash the PJ75IMG.zip but it says main version is older! or something to that effect and it fails. Any ideas?
UPDATE: Got it unlocked again and it booted back into OS.
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
PathogenVirdae said:
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
Click to expand...
Click to collapse
Did you fastboot flash the stock recovery after you relocked?
bigdaddy619 said:
Did you fastboot flash the stock recovery after you relocked?
Click to expand...
Click to collapse
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
PathogenVirdae said:
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Click to expand...
Click to collapse
Well since you are s-on you can't flash PJ75IMG files from bootloader if you want to update your phone to the latest OTA you have to relock your bootloader and reflash the stock recovery and take the OTA then unlock and flash twrp again.
If you click the link in my sig and download the 3.15/2.09 hboot file there is a stock recovery in the files as well as instructions on how to flash it
Sent from my PoS MoPho
---------- Post added at 09:19 AM ---------- Previous post was at 09:15 AM ----------
mrlakadaddy said:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Or this ^^^^ a much better choice
Sent from my PoS MoPho
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
PathogenVirdae said:
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
Click to expand...
Click to collapse
There is a stock recovery on the files I recommend as well as the commands to use
Sent from my PoS MoPho
So I'm trying to run the Dirty Racun method, and I'm sitting at this part "sudo ./fastboot flash zip RUU.zip"
How long should this normally take? The only thing I can see is Sending 'zip' (filesize) and htc on the phone. Does this process take awhile? >20 mins? Is there some kind of progress meter?
Update:// So apparently I'm stuck. DirtyRacun seems to hang on the RUU flash. BigDaddy, it also stops half way thru the stock recovery flash.
This is going to be a short and simple guide for S-OFF users that want to update to the current RUU level or refresh their phone because they are having issues like being unable to boot certain ROM's. You will not lose S-OFF by flashing the RUU.
1. Do a nandroid backup of your current ROM if you want to restore it later.
2. Download the current version of the RUU for your phone in exe or zip format from this page.
3. Run the exe version of the RUU in Windows or the zip version as a PG86IMG.zip file through the bootloader. If using the bootloader method make sure the file is named exactly "PG86IMG.zip" and placed in the root of your SD card before starting the bootloader.
There is no need to unlock the bootloader before running it if you are S-OFF and there is troubleshooting information in this post if you have problems. It may be necessary to run the RUU twice if you have a custom bootloader installed when it is run the first time. If the utility hangs after flashing the bootloader from Windows just cancel it and restart.
I recommend downloading and installing the OTA(s) immediately after flashing the RUU to get the most current firmware while still 100% stock, but the OTA firmware update(s) can be downloaded as a separate PG86IMG.zip file if you forget or can't do that for some reason.
4. Flash a custom hboot using the instructions in this post. My recommendation for a good general purpose hboot is the JBear GB 1.50.5050 version unless you are running an ICS Sense ROM like stock or Cool ICS that requires an ICS bootloader (1.57.xxxx or 1.58.xxxx).
5. Connect your phone to a PC and start the bootloader in "fastboot USB " mode, then issue the following command to flash your favorite recovery:
fastboot flash recovery recovery.img (where "recovery.img" is the name of the recovery file in your ADB/fastboot directory)
6. Boot into recovery and restore a nandroid or flash another custom ROM. You may have to wipe cache+dalvik and restart recovery if you get any error messages from the recovery program.
That's it. You're now updated or re-synced with the current firmware, the hboot that meets your requirements and your favorite recovery.
Here are some additional links that might be helpful:
4EXT Recovery OP for the Evo 3D CDMA thread with a direct link to recovery.img in the download section (not the most current version)
Current TeamWin (TWRP2) touch recovery for the CDMA Evo 3d.
Virgin Mobile OTA firmware only in PG86IMG.zip format.
Sprint OTA firmware only in PG86IMG.zip format.
ramjet73
Thanks for this.
Question,the RUU links...
Am I looking for the link with the radio he has currently on his phone?
0.97.10.0530?
3volution said:
Thanks for this.
Question,the RUU links...
Am I looking for the link with the radio he has currently on his phone?
0.97.10.0530?
Click to expand...
Click to collapse
No. That's an older GB level and the most current RUU for the Evo 3D is the 2.89.651.2 ICS version. That's the one I recommend.
Since he is S-OFF already it's easy to revert to a GB RUU if neccessary.
ramjet73
I better not mess with it,lol
This isn't anything like flashing new ROM's on my phone.
Thanks though.
3volution said:
I better not mess with it,lol
This isn't anything like flashing new ROM's on my phone.
Thanks though.
Click to expand...
Click to collapse
You're welcome.
It's not really that difficult if you are familiar with rooting and flashing HTC devices but I can understand how it might be for users coming from other brands. Samsung in particular is definitely less complicated.
ramjet73
Thanks!
Thanks for this great post ramjet. Really a great concise How-to.
Nevermind, fixed.
ramjet73 said:
No. That's an older GB level and the most current RUU for the Evo 3D is the 2.89.651.2 ICS version. That's the one I recommend.
Since he is S-OFF already it's easy to revert to a GB RUU if neccessary.
ramjet73
Click to expand...
Click to collapse
I flashed the above RUU .exe and I'll get to 10%, then my phone reboots (RUU program says "attaining bootloader" or something) and go into a bootloop. Is there a specific hboot necessary to run this. I am on 1.04.200 and s-off, 1.09.00.706
I also tried updating via the bootloader method as well..... runs well....updates like four of the ten check offs and then bootloops as well.
Edit: turns out I was flashing the wrong version, oops
Hedied4me said:
I flashed the above RUU .exe and I'll get to 10%, then my phone reboots (RUU program says "attaining bootloader" or something) and go into a bootloop. Is there a specific hboot necessary to run this. I am on 1.04.200 and s-off, 1.09.00.706
Click to expand...
Click to collapse
From experience I've discovered that the RUU.exe utility will sometimes stop after flashing the stock bootloader if it is run with a custom hboot installed, which is why I put this comment in the OP:
If the utility hangs after flashing the bootloader from Windows just cancel it and restart.
Click to expand...
Click to collapse
I've had no problem completing the RUU.exe flash if I just cancel the utility in the Windows task manager and restart it.
Others have reported that re-flashing the RUU.zip file through the bootloader also works if the original flash is incomplete.
Also, make sure that you downgrade your hboot after flashing the RUU since the stock hboot won't boot GB or AOSP based ROM's.
ramjet73
Ok one more stupid question, after successfully flashing the correct RUU my phone boots into the stock virgin mobile. How do I get into bootloader (to flash OTA update and hboot) from here since holding power and volume down button from off no longer work.
Sent from my HTCEVOV4G using Tapatalk 2
Hedied4me said:
Ok one more stupid question, after successfully flashing the correct RUU my phone boots into the stock virgin mobile. How do I get into bootloader (to flash OTA update and hboot) from here since holding power and volume down button from off no longer work.
Click to expand...
Click to collapse
Try removing/replacing the battery and then use the Power+VolumeDown buttons together to enter the bootloader.
The stock ROM has the "fast boot" option turned on in the power settings by default and that will interfere if you try to enter the bootloader after powering down from the stock ROM.
ramjet73
Thank you very much for your patience and help Ramjet. Everything went well.
Sent from my Evo V 4G using Tapatalk 2
Please excuse me this might have been asked before.
I'm currently S-Off H-boot 1.40 but still on gingerbread firmware(2.17 radio 0.97.10.0530). also flashed to Boost Mobile. My question is if I run RUU to newest build will I lose boost mobile flash?
El Queson said:
Please excuse me this might have been asked before.
I'm currently S-Off H-boot 1.40 but still on gingerbread firmware(2.17 radio 0.97.10.0530). also flashed to Boost Mobile. My question is if I run RUU to newest build will I lose boost mobile flash?
Click to expand...
Click to collapse
I honestly don't know.
There is a post by a cricket user in my rooting and S-OFF guide that says the customization is not lost for that carrier but I've never used Boost and can't speak to that.
Perhaps another Boost user on these forums has experience with flashing the RUU.
ramjet73
++sorry++
Using the bootloader procedure is, by far, the easiest way of doing the RUU process that I've encountered. From custom ROM, to stock, back to a custom ROM in less than 45 minutes.
ramjet, thank you for your contributions to our platform.
so my wife is hboot 1.40, radio version 0.97.... running a GB ROM. I need to update her EVERYTHING(you pointed me here) and get her on NegaLite BluROM. I believe I will need to update her hboot as well. At what point in this process should that be done? Do I need to be worried that her current ROM is incompatible with either the new RUU or the new bootloader? And if it is, then I just work through it all in recovery?
Very useful thread, and thank you very much, by the way.
GAPO said:
so my wife is hboot 1.40, radio version 0.97.... running a GB ROM. I need to update her EVERYTHING(you pointed me here) and get her on NegaLite BluROM. I believe I will need to update her hboot as well. At what point in this process should that be done? Do I need to be worried that her current ROM is incompatible with either the new RUU or the new bootloader? And if it is, then I just work through it all in recovery?
Very useful thread, and thank you very much, by the way.
Click to expand...
Click to collapse
Is her phone S-OFF? If so, there is a link in the OP to a post that covers updating the hboot. If not, the only way to update the hboot is to flash a more current RUU.
ramjet73
ramjet73 said:
Is her phone S-OFF? If so, there is a link in the OP to a post that covers updating the hboot. If not, the only way to update the hboot is to flash a more current RUU.
ramjet73
Click to expand...
Click to collapse
Yes she is S-off. She also already has 4ext recovery installed.
Does this negate my need to flash recovery in the downloader?
Since she is S-off, this should be pretty easy.
I will still need to access the bootloader via Windows cmd, yes? Or can I accomplish all of this using only the handset?
Sent from my PG86100 using xda premium
---------- Post added at 07:07 PM ---------- Previous post was at 06:52 PM ----------
Her hboot is:
SHOOTER XC SHIP S-OFF RL
HBOOT-1.40.0000
RADIO-0.97.10.0530
eMMC-boot
Jun 8 2011, 17:20:22
Is this a custom hboot, or stock? I ask because of the caution on the OP regarding custom bootloaders. And I am not sure because I changed her bootloader a week or so ago and had to change it back.
Sent from my PG86100 using xda premium
GAPO said:
Is this a custom hboot, or stock? I ask because of the caution on the OP regarding custom bootloaders. And I am not sure because I changed her bootloader a week or so ago and had to change it back.
Click to expand...
Click to collapse
That's a stock hboot so you should be fine. You can still update using the RUU if a custom hboot is installed, but it might take a restart to complete after the stock hboot is installed.
ramjet73
Hi,
I have a Sprint CDMA HTC EVO 3D. I tried root and get S-OFF for it. Unfortunately I failed and now the phone fail to boot.
Below is what I did from which you might be able to diagnose it and give me suggestions.
(1) The original status of mu phone is:
Stock rom, I never root it before.
HBOOT-1.58.0000
Android Version: 4.03
HTC Sense version: 3.6
Software version: 2.95.651.6.710RD
(2) My root procedures:
I followed this post: http://forum.xda-developers.com/showthread.php?t=1813818
I successfully unlocked phone with HTCDev, successfully Flashed 4EXT recovery, and successfully installed Superuser-3.1.3-arm-signed.zip. I also booted into sytem, everything worked well.
However I failed in next step of JuopunutBear's Wire Trick (S-OFF). When I ran ControlBear.exe, it finally hanged there.
Current status of my phone:
Unfortunately I did not make a backup to my original ROM, so there is no way to revert back by restoring backup.
Now the phone is in unlocked status, I was able to boot to HBOOT and also enter 4Ext recovery, however I am not able to boot into Android. If I try to boot into Android, it always hang at black screen.
I am able to boot to fastboot (USB) mode, I tried to flash some stock ROM (listed at http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209), but I failed. For example, I ran a RUU of 2.89.exe, it detected my phone version is 2.95, and further update RUU failed.
Looks like my partition is ruined, but I might be wrong.
ANyone can help me to restore my phone to working status? At least I need the phone to be able to boo to Android.
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
lsdyna said:
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
Click to expand...
Click to collapse
EDIT:
Okay. I've got some questions.
1. You're stuck on some black screen as you said. It boots past the white HTC splash and then it's stuck on that black screen, right. Do you mean the juopunutbear "arrow screen" - juopunutbears boot.img?
2. I think if you had flashed the original boot img everything would have been fine.
3. The easiest way is to flash to stock, so lets try to figure out why it doesn't flash.
MrJyrks said:
Okay. So from what I understood, you are stuck on the black juopunutbear screen, right?
Click to expand...
Click to collapse
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
lsdyna said:
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
Click to expand...
Click to collapse
And you can boot to recovery, right?
EDIT:
One more thing. Which ruu were you trying to run
Edit2:
What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Edit3:
BTW, this was on the wire trick page... http://unlimited.io/jbtroubleshooting.htm - TROUBLESHOOTING There was everything you needed to know when you failed at something. Remember that page. You may need it the next time you try to do the wiretrick.
Q: Were you using a linux distro for the wire trick and did you use the appropriate files for wire trick since GB and ICS have separate tools?
If you want I may assist you in gaining s-off if we get this thing functional again.
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
MrJyrks said:
And you can boot to recovery, right?
EDIT: One more thing. Which ruu were you trying to run
Edit2: What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Click to expand...
Click to collapse
lsdyna said:
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
Click to expand...
Click to collapse
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Edit: This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Now I only want to revert my phone to stock, not considering root at present time.
I searched 2.95 ROM, unfortunately the highest version that I can find is 2.89. Does this mean I have no way to revert my phone to live? Thanks a lot.
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
lsdyna said:
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
Click to expand...
Click to collapse
If you have access to the recovery, most likely, yes.
Hello MrJyrks,
Thank you so much for the link! I am eager to try that. Before I do that I think I shall ask two questions to avoid further mess up the device:
Question #1: To install the deodexed rom, which is the correct way:
(1) Rename the ZIP file to PG86IMG.ZIP, put to root of sdcard, then boot, letting the Bootloader to do the update.
(2) In 4EXT recovery, enable smartflash, enable script asserts, then install the zip from the root of sdcard.
Question #2: You said I shall flash boot image, can you tell me how to do this? I mean, where shall I get the boot image file? Flash it with 4EXT? SHall I do it before or after install ROM zip file?
Thank you very much for your helps!!!
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I tried install the stock ROM from your link (using 4EXT with smartflash enabled and script asserts enabled.) . Amazing that installation completed successfully (indeed this is the first ROM zip that I was able to install successfully since I mess up the device). When I exit After that, it did some further update which I guess is the boot.img that you mentioned.
4EXT it said 'a pending update for your boot partition is detected' and I think it was doing the boot image flash that you mentioned, right?
Unfortunately when I boo the device, I still got black screen.
Now I am unlocked and also rooted (since I successfully installed superuser in 4EXT). DO you think I shall lock the devioce before installing the stock ROM? If so, one possible issue is that if I relock the device, I found 4EXT is not available. In that case, how shall I install the ROM zip file?
Thanks.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
Further update:
I flashed boot image by: fastboot flash boot boot.img which is included in the stock ROM zip file.
The flash went successfully. However, I am still not able to boot to Android. WHat I have is the device hang there, alternatively displaying logo with white background, and black screen.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
lsdyna said:
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
Click to expand...
Click to collapse
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
MrJyrks, thank you so much!!!
MrJyrks said:
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
Click to expand...
Click to collapse
Similar problem, can't return to stock
I have a problem similar to lsdyna's, and am hoping that even though this post is old, MrJyrks or someone might be able to help me.
I am unsuccessfully trying to return my phone to stock. First a bit of history.
I had 2.95.651.6.710RD s-on hboot 1.58 Android Version: 4.03 HTC Sense version: 3.6 on my phone, and wanted root. I didn't need s-off, just wanted to root so could do some tweaking (stop some apps from autostarting, stop some form getting network access, etc.) so loaded 4EXT Recovery Touch, and got root (fastboot oem get_identifier_token method), got superuser in there, and happily began tweaking. Famous last words... I didn't make a backup right away (learned my lesson!) and suddenly found a 'overtweaked' sluggish phone on my hands.
Thought best thing would be to lose the root & return to stock & start over, carefully, making backups.
So I used Fastboot (fastboot oem lock) to lock it (worked) and proceeded to try to load RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe into it [via my computer], but didn't realize until reading MrJyrks post that a lower RUU couldn't be used.
I now am relocked (phone does boot up, but can tell the system tweaks are still slogging it), lost the recovery, and wondering what to do... do I try putting recovery back in & using the Negalite 2.95 stock deodex ROM MrJyrks mentioned? If so, how do I use that zip file method verses the exe one I tried thru my computer?
Thanks for the help
You had issues with the RUU because your main version is higher than that contained in the RUU.
Unlock, flash recovery again. Boot into recovery and flash this zip: https://copy.com/wlVvwssXXNN00Pe
That will lower your main version. Relock the bootloader, put the phone into fastboot USB mode, then run the RUU while in fastboot USB mode.
Should be back to stock after that.