I'm posting here because as a newbie, I'm not allowed to post in any dev forums, but . . .
I received the Verizon Galaxy S4 (SCHI545) yesterday, powered it on, activated it. It promply downloaded the I545VRUEMK2 update & asked me to install it, which I let it.
After reading the entire thread, I followed K1mu's post #1 instructions in the thread [ROOT] Saferoot: Root for VRUEMJ7, MK2, and Android 4.3
I took my time, because I wanted to make sure my Samsung USB drivers would communicate properly before taking the plunge. I had an older version of the drivers installed for my Droid Charge already (which were reported to work) but I wanted to test the ADB communications first.
After confirming that, i ran the batch file K1mu provided, & everything worked as expected. I rooted the Original Motorola Droid, the Samsung Droid Charge, & now this. I must say this was the easiest root I have performed.
Thanks to K1mu and all the helpful posters in that thread.
Chris
Would be nice if you actually post in a thread for the root.. this will probably get lost.
Just sayin...
awskier08 said:
Would be nice if you actually post in a thread for the root.. this will probably get lost.
Just sayin...
Click to expand...
Click to collapse
Scratch all I wrote below. I see what you mean. There are already several ongoing threads right here! I should have added to one of the existing . . .
I tried to post in the developers section where the conversation is ongoing. I have not enough posts, and the mods will not allow me to post there. If you mean I should have posted to a particular rooting thread in the "General Forum" . . . point taken.
Thanks
With that. thread is closed ...
Related
Thanks Guys!
I finally figured it out! My phone is not Rooted, running stock ICS, With a flash coutner of 0!
I ended up getting Kies, emergency firmware update to work. Full the full details go to this link!
http://forum.xda-developers.com/showthread.php?p=31720867#post31720867
Just wanted to update my thread, I hate it when people do not post the end result lol.
All of this to return a device to stock ???
My friend ....
Look at the top of the general section ....
There you will find a thread called ...."galaxy note super everything thread"
Scroll down the first post in the thread until you reach the " return to stock " sub section.
There you will find 3 different and confirmed methods ....
Read them, then read again ....
The methods are simple and effective .....g
And at the end of those three methods your counter will be zero.
I made things much harder than they needed to be!
I finally got it figured out! This is my first week of android, but I really like the flexibility of it. I just find iOS boring now days. I had an Iconia tablet a while back, I eventually gave it to my mom, but I never realized the capability of the OS till spending the weekend messing with rooting etc.
Thanks to everyone for taking the time to read my thread.
I edited it to reflect how I solved the problem, and put a link to the Kies Emergency Firmware Recovery thread, in case anyone finds themselves in my situation (I also explained exactly how I got it to work on the last post of page 9, the method seems to have changed a little bit since the original post) .
I'm glad it all worked out for you !
Great work ...g
hello.i have a Sprint htc evo 3d,android version 4.0.3.software version.2.95.651.6710rd.I would like to know whats the best and easiest way to root the evo3d and what is a good rom to run that is very stable and wifi and everything works..and a good kernel to run with it..i have rooted tablets and other phones before,but evo looks a lil complicated..sorry if posted in wrong section,and thank you again for your help..( i tried following these steps..-http://forum.xda-developers.com/showthread.php?t=1218193) watching the video and going step by step..doing full root part..when i go and open revolutionary.and run it.gives me..(your device.shooter with hboot 1.58.0000 is not supported at this time..can someone please help me..
You can't find the relevant thread and follow directions? I'll even help you out, you'll need a 32bit unix/linux. Ubuntu has a nice bootable you can burn and use. Then you use the jpuntubear executable downloaded from their website within that. Granted the one provided by the relevant thread might work on a 32bit OS but I can verify that it didn't work on Win7 64bit. Oh and you will have to hotwire your phone, literally short circuit your phone to get s-off so you can put a working ROM on. If you just want root and ok with stock OS, then you don't have to short your phone.
Also, if you can't find relevant thread and follow directions how do you expect to survive in the world of custom ROM's?
Dogahn
Lurk More.
I have Windows 7 32 bit..
I also have the same issue. A couple of months ago I tried to get s-off and it failed with the same message. After not finding any relevant information I gave up and just rooted my phone with the stock rom. I have had several android phones (Epic, galaxy SII, Evo 4G, lg Optimus V) and never had any problems. Make sure to reply with an answer rather than bashing the person asking the question.
At the moment I just want to root it..and methods that I have been following don't work..
This method works:
http://forum.xda-developers.com/showthread.php?p=24530433
It's close to the top of this forum. Read through the thread titles. You'll find all of your questions answered if you bother to look for them.
Swyped from my GS4.
Nevertheless, belongs in Q&A. Mods please move.
Sent from my PG86100
*.jpg said:
This method works:
http://forum.xda-developers.com/showthread.php?p=24530433
It's close to the top of this forum. Read through the thread titles. You'll find all of your questions answered if you bother to look for them.
Swyped from my GS4.
Click to expand...
Click to collapse
Also, Ramjet's easy to follow guide: http://forum.xda-developers.com/showthread.php?t=1889438
Good luck!
Thread moved out of development forum. Please keep questions here. Thanks
As others have mentioned, what is probably the most comprehensive compilation of information you will find on the web can be found on the link below:
http://forum.xda-developers.com/showthread.php?t=1889438
Additionally, if you have issues with the "wire trick" to get S-OFF you can always just do the HTC unlock. You won't be able to flash HBoots but you can flash ROMs and Kernels (use fastboot to boot into recovery from PC).
I, for one, can state that I've done the JopunutBear "wire trick" successfully twice on a Windows 8, 64-bit OS. However, if you choose to try to do this know that you will be entirely on your own as they no longer support anything other than Linux.
I have the Samsung Galaxy S2 I9100M from Bell Running Latest Stock 4.1.2
I have successfully rooted.. I need help with what CWM Recovery to use and how do I find Liquid Smooth for this phone.. Contact me asap
Read ASAYCBIAAOT (As Soon As You Can Because It's All Already Out There)
Sent from the little guy
Exactly. What you need to do is some searching/reading & learning on your own.
Reported post for user not searching/reading and wanting to be spoon fed.
Rule #1 is to use the Search function.
This phone is not new by any means, so that answers are all out there. Just look in the General, Q&A and Development Stickies and the answers you will find.
Thread Closed
US Cellular LTE SG3 - SCHR530, Was build ALK5 on 4.1.1 and was rooted (using free version mskip's Toolkit) and all was fully functional. When the 4.1.2 android update became available for my phone, I performed manual 4.1.2 download/installation, which completed successfully. Build AMD4.
Donated/upgraded to mskip's pro version Toolkit. Began the re-root - exact build wasn't listed, picked closest, completed process, phone was rooted BUT lost all access to camera and any apps that use camera failed due to camera fail. Unable to find a cure for this particular issue, I used the toolkit to unroot my phone. I RE-applied Samsung android update 4.1.2 and have remained UNrooted until last night.
Ran the Toolkit, toolkit auto-updated to the latest version released (says 4.1.2 build AMD4 is supported) , prepared to root phoneagain I find this exact build (AMD4) is not listed, so picked closest one, completed process, phone is rooted..... BUT AGAIN I have no use of camera!
How can I fix this and stay rooted? Or do I resign myself to not having a rooted phone in order to keep functionality of my camera?
Thanks for any helpful insights to this issue.
SAME issue
firstbrick said:
US Cellular LTE SG3 - SCHR530, Was build ALK5 on 4.1.1 and was rooted (using free version mskip's Toolkit) and all was fully functional. When the 4.1.2 android update became available for my phone, I performed manual 4.1.2 download/installation, which completed successfully. Build AMD4.
Donated/upgraded to mskip's pro version Toolkit. Began the re-root - exact build wasn't listed, picked closest, completed process, phone was rooted BUT lost all access to camera and any apps that use camera failed due to camera fail. Unable to find a cure for this particular issue, I used the toolkit to unroot my phone. I RE-applied Samsung android update 4.1.2 and have remained UNrooted until last night.
Ran the Toolkit, toolkit auto-updated to the latest version released (says 4.1.2 build AMD4 is supported) , prepared to root phoneagain I find this exact build (AMD4) is not listed, so picked closest one, completed process, phone is rooted..... BUT AGAIN I have no use of camera!
How can I fix this and stay rooted? Or do I resign myself to not having a rooted phone in order to keep functionality of my camera?
Thanks for any helpful insights to this issue.
Click to expand...
Click to collapse
I am having the exact same issue, I need my camera and my root, might have to go back to 4.1.1 to get it though.
I'm also on a donated toolkit, please post if you find a solution.
This is the i9300 forum, you are in the wrong place. Also have you tried contacting mskip to raise a query?
Re: Camera Failure following mskip Toolkit use to root
slaphead20 said:
This is the i9300 forum, you are in the wrong place. Also have you tried contacting mskip to raise a query?
Click to expand...
Click to collapse
Thank you for your acknowledgement, I truly appreciate it.
I did know this is the i9300 forum, and I have tried to contact mskip a number of times, including directly in the thread that the most recent toolkit was announced. Apparently I cannot post in there (?) due to not having enough posts and not being a developer; at least that's what the "error message" is when I tried. And then the advisement that I must post questions in a Q & A. I guess I'm lost!
In any case, I did several searches for the camera issue combined with rooting and I ended up in this forum. I would greatly appreciate it if you could steer me towards the proper place to post - I haven't seen a specific forum for the US Cellular model SG3, and I'll admit - I'm greatly out of practice these days in my forum using skills.
Follow up - help for root w/toolkit camera lost issue
firstbrick said:
Thank you for your acknowledgement, I truly appreciate it.
I did know this is the i9300 forum, and I have tried to contact mskip a number of times, including directly in the thread that the most recent toolkit was announced. Apparently I cannot post in there (?) due to not having enough posts and not being a developer; at least that's what the "error message" is when I tried. And then the advisement that I must post questions in a Q & A. I guess I'm lost!
In any case, I did several searches for the camera issue combined with rooting and I ended up in this forum. I would greatly appreciate it if you could steer me towards the proper place to post - I haven't seen a specific forum for the US Cellular model SG3, and I'll admit - I'm greatly out of practice these days in my forum using skills.
Click to expand...
Click to collapse
Still no love for my issue, and almost a month later, still the choice of root & no cameras or cameras & no root :crying:
Toolkit support says US CELLULAR MODEL LTE[SCH-R530] support should use AT&T, Rogers, Bell, Telus Samsung Galaxy S III forum, can anyone verify for me if that is the correct place to try to post about my problem? Thank you very much!
firstbrick said:
Still no love for my issue, and almost a month later, still the choice of root & no cameras or cameras & no root :crying:
Toolkit support says US CELLULAR MODEL LTE[SCH-R530] support should use AT&T, Rogers, Bell, Telus Samsung Galaxy S III forum, can anyone verify for me if that is the correct place to try to post about my problem? Thank you very much!
Click to expand...
Click to collapse
See sticky top of the page if its not in there try Google your model xda.
Apparently I cannot post in there (?) due to not having enough posts
you should have now
Try one of the other methods of root and recovery like TWRP .
Google finds
http://forum.xda-developers.com/wik.../SCH-R530#XDA-Developers_Forums_for_the_Phone
JJEgan said:
See sticky top of the page if its not in there try Google your model xda.
Apparently I cannot post in there (?) due to not having enough posts
you should have now
Try one of the other methods of root and recovery like TWRP .
Google finds
http://forum.xda-developers.com/wik.../SCH-R530#XDA-Developers_Forums_for_the_Phone
Click to expand...
Click to collapse
It does seem that most of that info is out of date and there is no real home for the US Cellular LTE Samsung Galaxy S3, and as far as the other methods, I am just not that savvy - the automated toolkit is slick, but I appreciate your suggestions. Thank you.
Hi guys, I know this has been discussed a lot but I have no idea what to do next, here's what happened:
So one of my friends bought a used galaxy S3. The next day, he noticed that the IMEI inside the phone was actually different than the one shown inside Android Settings, so I just assumed maybe the motherboard has been changed or something like that. Anyway, I proceeded to install CM10, but after trying it out for a couple of days he complained the device had been crashing a lot and that he wanted to go back to the stock ROM. So this morning I downloaded the right 4.1.2. ROM and flashed via Odin, after which I had noticed I wasn't able to make any calls whatsoever. After reading up on this I checked the SN, which was now 00000000000, bun even after rooting / trying the ariza patch, the phone is not working anymore. I have no EFS backup, and was thinking about trying to flash the modem next to this http://forum.xda-developers.com/showthread.php?p=43946365#post43946365 , is this the right fix? If not, can I actually do anything about it now? Thanks.
Faqs and guides its all posted we don't need identical threads .
Sorry, I know there are a lot of other threads like this one being opened all the time, but even after reading my ass off today I couldn't figure it out, which is why I decided to post here, I would really appreciate a link to a relevant topic, if a full answer is too much to ask. Thank you.
Mod Edit
Please read the stickies in General before posting.
Thread closed
malybru
Forum Moderator