Related
Is there any known way to fix a bricked G4?
bricked or dead explain more your problem
Bricked
It was bricked, I had the Bule, Green, Red screen. But I went to http://www.htcamerica.net/support/81...downloads.html and flashed the original Rom. Thanx for trying to help though, it's much appriciated.
- Artzmaster01
You were just in bootloader screen, it wasn't bricked! Wouldn't hurt if you gave some details.
Jeez . . .
Sorry for being a noob. Is anyone here actually helpful or are all of you just stuck up?
- Artzmaster01
Artzmaster01 said:
Sorry for being a noob. Is anyone here actually helpful or are all of you just stuck up?
- Artzmaster01
Click to expand...
Click to collapse
i'm a NOOB too but you can't expect to be spoon fed can you? this is THE development site for our devices and the guys here are helpful to a fault..but what would your mechanic say if you towed your car into the garage and said it doesn't work? you just didn't provide the information required to get an answer...not that you needed an answer from the guys here...it's all in the wiki or do a search it's been asked a thousand times. if your asking for help in future i'd suggest your more civil about, "you'll catch more fly's with honey"
Done that
I think the search engine is broken cuz I've searched for information about what I want to learn and it will tell that it's invalid. And I tried to be civil but the guy practically told me that I was an idiot, there's no need for it.
Artzmaster01 said:
I think the search engine is broken cuz I've searched for information about what I want to learn and it will tell that it's invalid. And I tried to be civil but the guy practically told me that I was an idiot, there's no need for it.
Click to expand...
Click to collapse
Strange . . . I didn't get that impression from the replies you got. As far as your searches saying "invalid", I have no idea exactly what your search criteria was, but you might want to use this in the future.
As far as knownuser's reply, he's right on the money. Noone here "owes" you any thing. It's up to YOU to do the reading to learn what you need to know. Everything you need is either in the Wiki or in the forums' threads. The developers here are developing and they don't have time to respond to questions that have already been asked -- and answered -- a thousand times over. If you're not willing to learn by taking the time to read the information that's already available on here, then you don't belong here in the first place. The developers here don't have time to spoon feed every noob that keeps asking the same question over and over.
Now, if MY response makes you feel like an idiot -- if the shoe fits . . .
OK . . .
One . . . I never said that anyone OWED me ANYTHING. Two . . . if it's a question that YOU or anyone else has previously answered, then why answer it again and get frustrated? JUST DON'T REPLY! WOW! Sounds so hard . . . So I screwed up, sue me . . . >=P
P.S. And NO, you didn't make me feel like an idiot. You just made yourself look like a stuck up jack ass
Artzmaster01 said:
One . . . I never said that anyone OWED me ANYTHING. Two . . . if it's a question that YOU or anyone else has previously answered, then why answer it again and get frustrated? JUST DON'T REPLY! WOW! Sounds so hard . . . So I screwed up, sue me . . . >=P
P.S. And NO, you didn't make me feel like an idiot. You just made yourself look like a stuck up jack ass
Click to expand...
Click to collapse
There's a reason many members get frustrated when forced to answer the same question on a regular basis. In their/my eyes this indicates a lack of understanding and reading on behalf of the member who posted the question. This is a known problem with many forums.
P.S You would be well advised not to abuse other established members who obviously know more than you do. On the off chance that you do require assistance again in the near future, abusing other members pretty much gurantees you wont receive it.
Understandable
FINALLY! Someone explaining things WITHOUT trying to rip me a new one. I understand where you're coming from, but I did apologize for being ignorant yet people felt the need to unload their repressed anger towards me. I am truly sorry for getting ahead of myself and I do appreciate all of the hard work that all of the senior members have put into making our HTC experience a good one; but that tends to make themselves into arrogant monarchs who become full of themselves. Trust me, I know what it's like to get frustrated, I'm a karate instructor who has to deal with kids from ages 4 and up 5 days a week. And if any parent here is reading, they know how tough dealing with a 4 year old can be. Try dealing with 30 at a time . . . But no matter how much more I know than someone in the martial arts, I NEVER act better than them. It's bad for business. So in closing, Thank you to everyone who has contributed to this board but frankly some of you need to cool down a bit. Thanx Peter Petrelli (love the SN, Heros rocks!) for being the only one to politely tell me what I did was wrong.
Best way to deal with Senior members with tendency to flame newbies (i confess!) is to ask like you're Shrek's ***** cat making those 'feel pity for me' big eyes:
"Can you please kindly tell me..."
"I've searched for hours and haven't had much luck in finding the..."
"I've used the search engine a lot but most of the results don't work. Can anyone point me on the right direction?"
and son on and so forth
cheers
Artzmaster01 said:
Sorry for being a noob. Is anyone here actually helpful or are all of you just stuck up?
- Artzmaster01
Click to expand...
Click to collapse
I love noobie bricks!!
Ok I get interested reading a thread like this.
Honestly is it not easier to say: I have a phone blah blah, which I tried to blah blah blah, and all I'm getting is blah blah, can someone guide me on what to do or is it dead or not dead? (I think bricked has been abused in this case)
All will easily be explained and someone will help. Details do help! First thing I do, whenever I want to do something is read and read the forum. Thats why I have less posts! ha ha I would have asked alot but frankly all the info (to a certain degree) has been provided
noob mistake from a PC tech, lol...
I very stupidly didn't check to see if a Wizard was a G3 or G4 and flashed the WM5 IPL 1.01 downgrade on it thinking it was a G3 and I was setting up for use with LokiWiz. It tried to boot after the flash, but it froze. Now, it just flickers for a split second when I attempt to power it on. I tried entering bootloader through camera + power, camera + reset, comm + voice + reset, as well as mail + camera + power, and nothing is making it enter bootloader. I'm figuring that in my assumption I made an a** outta myself and finally bricked my first phone, after sucessfully flashing about 20. I read somewhere that you could cut your power cord and tap the live contacts to pins 1 and 5 and unbrick a seriously bricked phone, but can't seem to find the article again. Would someone kindly point me in the right direction? Also, has anyone had any luck with this method?
To enter bootloader you keep 'voice' pressed and poke the reset hole briefly but then again it's nothing that doesn't come in the wiki
One of the things that I tried. I didn't list it though, I'm going nuts with this phone. When I do that it still shows nothing. What I think I did was flash the G3 bootloader on a G4 device. Does anyone know the cut cable method?
No, if you do so and make your Wizard can't even power on, then it's a brick. It is nearly impossible to recover unless you know the JTAG method (AFAIK, only 1 person here successfully unbrick a really bricked G4, and he didn't tell us how).
my suggestion for the bricked phone (if indeed it is bricked, ie., it won't turn on at all) is to call HTC up and see if you phone is under warranty. I bought my cingular 8125 off of ebay and i use it with a canadian provider, so there is no warranty from anyone in that case, but suprisingly, when i bricked my G4 and I was gonna send it to get it fixed at whatever cost they were gonna say, they went by the IMEI # and said that it was still under warranty (irrespective of the fact that i bought it off of ebay and that i wasnt a cingular customer) and fixed it at no cost. They even changed the entire housing and put a new one on there for free (no idea why). So call them and try it. You have nothin to loose by calling. Good luck, i understand the pain and anguish and the "kick myself in the a**" feeling when yo flash a G3 onto G4 unknowingly coz thats what happened to me. again, good luck.
Hi there. I have/had wizard g4, but after upgradin' rom by ruu my phone is bricked. he doesn't even respone to charger.
Now technical details: upgrade was done on i/spl 2.21.001/olip, so after hardspl'ing him. Everythin' went just fine, but in 73% i've realised that i'm uploadin' g3 rom... So i let ruu finish his job and now my pda is completly dead.
I won't be askin' for HELP, i will ask for info. Will anyone can tell me: if i take out 'disk on chip' (cause i think that's the flashrom chip), how i can reflash it? I mean: should i just put nk.nbf from 0x0000 or split rom image onto bootloader, radio and os and put it partially? what are adressess of those thinx and lenght of code? and how can i split nk.nbf?
Congrats !
What your are asking is not easy to do,it requires special flashing tools and connectors,which only the manufacturers and vendors have,It needs new bootloaders,you cannot do it yourself.DOC chip might have to be replaced,it means an almost new phone
Btw,have you tried to force it into bootloaders ? might be lucky,if it gets into bootloaders.well there's no harm in trying,if it does,then you might in luck and safe.
whatdy'a mean sayin' 'force it into bootloader'? if you mean pressing cam button while poweing it on- yes i've tried. i even tried to boot linux on desktop computer, connectin' wizard and typin' 'lsusb' in console, hoping that something like 'xxxx:xxxx unkown vendor' occurs. But, still no luck. even linux thoughts that usb port with connected wiz is free.
I know that only vendors and sevice-guyz know 'tricks' about connecting directly to DOC chip... but i'm still hopeing, cause i've found two unused connector places on mainboard(after disassemblin' of corse)- one in the middle, second next to sim card connector and i'm wondering if there's any chance to ommit BGA-welding(sorry 4 my english).
Have you heard about conspiracy theory ? i begun to belive in it... I think that many people know what 2 do, but noone want to help me from one particular reason: if someone helps me, i wouldn't need to pay in service, so someone will not earn money...
anyway, what do you mean about 'force in2 bl'?
lis6502 said:
whatdy'a mean sayin' 'force it into bootloader'? if you mean pressing cam button while poweing it on- yes i've tried. i even tried to boot linux on desktop computer, connectin' wizard and typin' 'lsusb' in console, hoping that something like 'xxxx:xxxx unkown vendor' occurs. But, still no luck. even linux thoughts that usb port with connected wiz is free.
I know that only vendors and sevice-guyz know 'tricks' about connecting directly to DOC chip... but i'm still hopeing, cause i've found two unused connector places on mainboard(after disassemblin' of corse)- one in the middle, second next to sim card connector and i'm wondering if there's any chance to ommit BGA-welding(sorry 4 my english).
Have you heard about conspiracy theory ? i begun to belive in it... I think that many people know what 2 do, but noone want to help me from one particular reason: if someone helps me, i wouldn't need to pay in service, so someone will not earn money...
anyway, what do you mean about 'force in2 bl'?
Click to expand...
Click to collapse
First,let me clear you here, There's no such "Conspiracy theory" being practiced here in this Forum.It's a development Forum and not a Technical Advisory Service of some sort,where experts give advise and earn money.Its a free forum to help the newbies about the problem regarding their phones,We here believe in "Help & Support".The guys and gurus are not trained technical experts,its a voluntary website,where guys help and advise what they have learned and gained to the new guys joining and asking for help and they do it with honesty and to the best of their knowledge without any monetary benefits.
Secondly,Yes ! thats exactly what I meant for 'Force into booltloaders',cuz,may be if it does boot in the bootloaders,then it might be recovered,just a haunch,but if it doesn't,then its another dead paper weight on the desk.
Cheers!
I think it's a misunderstood there. I mean that maybe someone know what to do, but if it would leak to internet then services can lost money, cause what to pay 50$ i.e. if you can repair PDA by yourself?. I mean also that i've searched whole wide web... My polish sites of electronics, pda forums, even those forums where volunteers helps guys who crashed their bioses on PC's. And nothin', no one replies to mails, and if i ask someone directly they say thats no hope for me and my PDA.
I just cannot believe it... Even old PC had protection, if you uploaded wrong code into BIOS and PC cannot boot you always could ISA graphic card and boot from floppy.
lis6502 said:
I think it's a misunderstood there. I mean that maybe someone know what to do, but if it would leak to internet then services can lost money, cause what to pay 50$ i.e. if you can repair PDA by yourself?. I mean also that i've searched whole wide web... My polish sites of electronics, pda forums, even those forums where volunteers helps guys who crashed their bioses on PC's. And nothin', no one replies to mails, and if i ask someone directly they say thats no hope for me and my PDA.
I just cannot believe it... Even old PC had protection, if you uploaded wrong code into BIOS and PC cannot boot you always could ISA graphic card and boot from floppy.
Click to expand...
Click to collapse
focus on the problem:
tell me if u can at least see the bootloader ? If yes then u can have a fair chance of bringing urs back to life
It is because you are not supposed to flash a ROM that is not for your device!
For example, what will happen if you flash a AMIBIOS to a motherboard that uses AWARDBIOS (By your own way for sure)? Flashing G3-only ROMs to G4 device is just like that.
The protection for htc device is not letting you to flash a G3 only RUU in the usual way, you cracked to let it allow any ROM is your own problem, not problem of htc, and htc doesn't have to take care of it.
alber786 said:
focus on the problem:
tell me if u can at least see the bootloader ?
Click to expand...
Click to collapse
few posts ago i've wrote, that i cannot even see red led when pluggin' onto charger. BL mode doesn't work either (cam+ sr or cam+pwr).
i've found another way to resurrect my wiza200. JTAG.
But ofcoz noone knows where are testpoints located. But i'll find it. BTW someone can e-mail me fubu of working g4 wizard? lis6502 (at) gmail (dot) com
starkwong said:
For example, what will happen if you flash a AMIBIOS to a motherboard that uses AWARDBIOS (By your own way for sure)? Flashing G3-only ROMs to G4 device is just like that.
Click to expand...
Click to collapse
yeah, i know what i did. i understand example of bioses misupload. i've explained in that way to some guys who doesn't understand what i did
starkwong said:
The protection for htc device is not letting you to flash a G3 only RUU in the usual way, you cracked to let it allow any ROM is your own problem, not problem of htc, and htc doesn't have to take care of it.
Click to expand...
Click to collapse
Do i cracked it? i just found ONE working ruu which allowed me to upload any rom to my device. i've switched nk.nbf files in folder wich ruu was in.
I know also that HTC wouldn't help mi, i'm not counting on warranty or manufacturer help.
No No...
You installed HardSPL to your device, so your device is already cracked (say patched may be better) by you.
starkwong said:
No No...
You installed HardSPL to your device, so your device is already cracked (say patched may be better) by you.
Click to expand...
Click to collapse
uhm, it may be infatile question, but is it illegal? i know thah chaging IMEI is illegal, but is hardspl'ing too?
Cracking SPL is not an offense in law, just violate the warranty terms only.
2 starwonk: man, i'm from poland. i've bought my spv on polish eqiuvalent of e-bay. It's o2 xda mini s, so warranty is only valid in UK. i've told that i'm not counting on warranty. i need and must do it all by myself. and i will do it. Wish me luck
Okay, I know I'm supposed to search seven hells (watching too much Game of Thrones) before I post my question. The intro video was clear enough about that. But no, nothing helped. So here goes....
Hi guys,
My HCL ME V1 tablet (ICS 4.0.4, kernel 3.x.x, rooted with ME U1 root via SuperOneClick. Several forums said that this root would work for V1 as well) is stuck in a boot loop. The rest button does not solve the problem, neither does a hard reset (it simply does not go into hard reset from all the methods suggested online across various forums). I scoured heaven and earth to find how to go into recovery for this particular tablet but none of the solutions work.
The power button works only once when it's in 100% charge (green light on the top corner of lcd). After that I have to wait for it to get discharged completely and recharge it once again. All those tips of pressing the volume up and/or down button along with the power/home button and the reset pinhole... none of them worked in my case. I know its a corrupted OS issue and I can solve it. Only if I could somehow get the tablet to boot once or get into recovery or download mode. I know it for a fact that the power button i fine because... again... I stand witness to the fact that the tablet has not experienced any physical shock what-so-ever since the day it was bought. Also not to forget it works once when the tab is in 100% charge.
I can see two scenarios by which the problem might have started:
1. I downloaded FL Studio Mobile apk and its dlc from pirate bay. I copied the apk to the internal SD card (straight on the sd card not inside any folder), and the dlc was instructed to be copied to sdcard/Android/obb. The uploader had said that if the obb folder was not there, I had to create it and so I did and copied. Halfway through the dlc copy, my laptop hanged. So I terminated the process from taskmgr and disconnected my tab from the "disconnect from USB storage" page on the tablet.
2. Next I opened Android Tweaker (Pro?) to tweak a few parameters so that FL Studio Mobile could run a bit lag free. I'm not a power user so, I just used the auto-tweak feature for the performance settings. Next I rebooted via the app and lo! The tablet is now stuck in an eternal boot cycle loop.
I'm an electronic musician and like to have these apps on my devices so that I can make music on the go.
Also one thing I should mention is that while rooting the /bin/su file could not be executed, however installing Titanium Backup Pro (Root) had solved that problem as there was an option in that app to fix it.
Sorry for the long post :cyclops: but I think my problem is somewhat peculiar if not unique. No body else's solution is working and I think there are not many Indians who use the V1 tablet.
Solved
Thank you everyone for not replying to this post. You may have thought that the solutions existed in someone else's answers. But NO. None of anyone else's solutions worked.
I thought this was a place full of experts, but I guess you people are way too busy with your own stuff to really help others which is the purpose of this forum.
Anyways, I solved the problem. The tablet works fine, in fact it works even faster. And just to rub it in HCL's face, I've upgraded the internal memory and RAM. Yes I resoldered the PCB. Removed all the bloatware and useless stuff from our dear beloved Indian manufacturer.
But I'm not going to share how I solved this issue. None of you took the time to reply, so non of u will get this piece of knowledge upgrade. Funk you very much :victory:
Help
pborah88 said:
Thank you everyone for not replying to this post. You may have thought that the solutions existed in someone else's answers. But NO. None of anyone else's solutions worked.
I thought this was a place full of experts, but I guess you people are way too busy with your own stuff to really help others which is the purpose of this forum.
Anyways, I solved the problem. The tablet works fine, in fact it works even faster. And just to rub it in HCL's face, I've upgraded the internal memory and RAM. Yes I resoldered the PCB. Removed all the bloatware and useless stuff from our dear beloved Indian manufacturer.
But I'm not going to share how I solved this issue. None of you took the time to reply, so non of u will get this piece of knowledge upgrade. Funk you very much :victory:
Click to expand...
Click to collapse
Hey bro,
I am newbie with this HCL V1 tablet and it sucks a lot to use this. I got it sent to HCL store for repairing (to flash) just after 3 days I ordered it.
As you are the user of this tab you should be very well known to the problems this tab comes with. Even its not playing the Subway Surfer game smoothly, wt the hell with 1 GB RAM.
So please suggest me the twiks for this tab as like working rooting, global or transparent proxy (needs in college campus because in college wifi works only with default browser with no download at all (only in androids, downloads in symbian, iOS) probably because download runs with external app by default in androids as it shows differently in notification bar about the download progress).
Please help me to resolve these problems.
Thank you.
Mail me at : [email protected]
help
guy pls dis is my email..am havin d same problem 4 4months nw.help me out [email protected]
Reason is overclocking that u have done
the reason for this is that u have overclocked the processor (especially at boot)
anyone here who knows that if that rom work with new HCL me tab or not ?? any ?
dude i stuck with the same problem ... i know u have issue by not posting the solution ... i checked your facebook ID it is not working ...
I desperately need your help .. plz help or at list tell me wher do i find u to get help online ..plz help ..plz help
pborah88 said:
Thank you everyone for not replying to this post. You may have thought that the solutions existed in someone else's answers. But NO. None of anyone else's solutions worked.
I thought this was a place full of experts, but I guess you people are way too busy with your own stuff to really help others which is the purpose of this forum.
Anyways, I solved the problem. The tablet works fine, in fact it works even faster. And just to rub it in HCL's face, I've upgraded the internal memory and RAM. Yes I resoldered the PCB. Removed all the bloatware and useless stuff from our dear beloved Indian manufacturer.
But I'm not going to share how I solved this issue. None of you took the time to reply, so non of u will get this piece of knowledge upgrade. Funk you very much :victory:
Click to expand...
Click to collapse
this bori guy is a selfish fellow. and why not? i heard bori's are all business minded. so how much shall i pay you to get your idea published here to all.
Thank you Mr. Racist Indian
jacktackle said:
this bori guy is a selfish fellow. and why not? i heard bori's are all business minded. so how much shall i pay you to get your idea published here to all.
Click to expand...
Click to collapse
You are proving to the world how racist Indians are to each other nothing else. And I'm not a Bori wherever the **** they are from. Its Borah you "madarchod ki aulad hindustani" Of course now you will report this to the admin and I will get banned from this site. Or you're gonna throw your cheap sounding Indian abuses at me, or you will try to act like a smartass and type a nice sophisticated sounding comeback to make people sympathize with you. What else can your beta-male-Indian-ass do? Either way, you are insignificant to me and whatever you say is invalid in my world. And thank you for quoting me because finally I got a notification from this website.
For the rest of the people-
This thread is almost one year old now if you know how to read the English calendar. The FB account that was linked to this has been deleted almost a year ago. I don't exactly remember the solution but I cracked open the tablet, took out the ROM, took it to a friend who burns ROMs.
This tablet was meant for my dad which is why it pissed me off no end that it should malfunction. Eventually I threw this piece of **** in the trash and got him a Samsung tab that works the way it is meant to work.
My advice - save some money and buy a higher end android tab and your life will be much more peaceful. Unlike iOS where the hardware platform is pretty much standard, the wide variety of configurations on which android is installed is the main culprit here. You want smooth performance, less lag, and bug free performance, and easily available non-factory support? Honestly start saving money and get a better brand tab. No where else in the world do people push these cheap ass tablets so hard other than the third world.
I understand you all want the best bang for your buck but understand what "best" is first.
Now, you'll can crucify me in your replies if you want. I don't give two ****s about it. Peace out homos!
Calm Down Bro ...
thande thande raho bhai jaan ...
pls help
pborah88 said:
You are proving to the world how racist Indians are to each other nothing else. And I'm not a Bori wherever the **** they are from. Its Borah you "madarchod ki aulad hindustani" Of course now you will report this to the admin and I will get banned from this site. Or you're gonna throw your cheap sounding Indian abuses at me, or you will try to act like a smartass and type a nice sophisticated sounding comeback to make people sympathize with you. What else can your beta-male-Indian-ass do? Either way, you are insignificant to me and whatever you say is invalid in my world. And thank you for quoting me because finally I got a notification from this website.
For the rest of the people-
This thread is almost one year old now if you know how to read the English calendar. The FB account that was linked to this has been deleted almost a year ago. I don't exactly remember the solution but I cracked open the tablet, took out the ROM, took it to a friend who burns ROMs.
This tablet was meant for my dad which is why it pissed me off no end that it should malfunction. Eventually I threw this piece of **** in the trash and got him a Samsung tab that works the way it is meant to work.
My advice - save some money and buy a higher end android tab and your life will be much more peaceful. Unlike iOS where the hardware platform is pretty much standard, the wide variety of configurations on which android is installed is the main culprit here. You want smooth performance, less lag, and bug free performance, and easily available non-factory support? Honestly start saving money and get a better brand tab. No where else in the world do people push these cheap ass tablets so hard other than the third world.
I understand you all want the best bang for your buck but understand what "best" is first.
Now, you'll can crucify me in your replies if you want. I don't give two ****s about it. Peace out homos!
Click to expand...
Click to collapse
Hi iam new to this I have hcl v1 tab I want to root it but you told that you got stuck in a boot loop so can you tell me how to solve it in case I also get stuck it .how to install the stock firmware by using Android stock recovery.i know to get in stock recovery but no download mode.i am just 12 .please help me.
Please admins do some cleaning here. A lot of tutorials is very bad ripoff of another tutorials.
I my case I can not find one logically structured tread with general info about G2 flashing, SW versions and so on.
A lot of people try to make a money, by giving wrong information an later ask money for help to unbrick others phones. This is just terrible!!!
I AM ANGRY DUE TO BAD TUTORIAL I BRICKED MY PHONE REAL BAD.
Please ,clean or make new rules for comment rights, to help other not brick their phones!!!!
Hi
I think problem is not tutorials, but people who used first random tut.
Im sorry you bricked your device, but root G2 is really easy and install twrp.
For root u can use DP Tools from android g2 section, and twrp u can get with autorec from playstore.
That's all, if u wanna use customized roms, u will need install Jelly Bean bootloader, it support kitkat/lollipop/aosp roms. LG G2 is unbrickable by software, every state can be repaired. So, search tutorial for you to unbrick device and use my steps to have full unlocked device and feel free to mods and roms
I just unbricked my G2 after 6 weeks so ask if you need anything to help you.
Ganjax said:
Hi
I think problem is not tutorials, but people who used first random tut.
Im sorry you bricked your device, but root G2 is really easy and install twrp.
For root u can use DP Tools from android g2 section, and twrp u can get with autorec from playstore.
That's all, if u wanna use customized roms, u will need install Jelly Bean bootloader, it support kitkat/lollipop/aosp roms. LG G2 is unbrickable by software, every state can be repaired. So, search tutorial for you to unbrick device and use my steps to have full unlocked device and feel free to mods and roms
Click to expand...
Click to collapse
Nope. G2 community is so bad. No one give solutions, only ask for money , even steel credit card date. I love the phone, but the community is just terrible.
It is quite often that I found solution tread, first tree pages of comments are "nice work" , "good job" and so on , after fifth page real users actually give negative feedback. Now I am reading tread with 77 pages. I am in the middle and I still do not understand is it safe to use tutorial. And there are a lot of treads like this. XDA should give some rating possibility, to delete treads with wrong or not working properly solutions.
I am very disappointed in XDA.
MixXx2005 said:
Nope. G2 community is so bad. No one give solutions, only ask for money , even steel credit card date. I love the phone, but the community is just terrible.
It is quite often that I found solution tread, first tree pages of comments are "nice work" , "good job" and so on , after fifth page real users actually give negative feedback. Now I am reading tread with 77 pages. I am in the middle and I still do not understand is it safe to use tutorial. And there are a lot of treads like this. XDA should give some rating possibility, to delete treads with wrong or not working properly solutions.
I am very disappointed in XDA.
Click to expand...
Click to collapse
So, you mean u dont understand anything. I bricked my device few times, and i had no problem to recover this without any pay to anyone i know how to install cwm, rom, bootloader, how.. If you said we need pay for everything? Open your mind, if u are too lazy to read easy tutorials
Ganjax said:
So, you mean u dont understand anything. I bricked my device few times, and i had no problem to recover this without any pay to anyone i know how to install cwm, rom, bootloader, how.. If you said we need pay for everything? Open your mind, if u are too lazy to read easy tutorials
Click to expand...
Click to collapse
I can provide you with tons of treads in G2 sections, that is outdated or do not work from the begging.
I am reading these in terrible english written treads for straight two days and still nothing that wort been read!
As a matter of fact I am not a noob or total beginner ether....
You show u are, if no one before cried about G2 section everyone can mods, but not u, why? We should ask just u, this is not freakin magic
MixXx2005 said:
I can provide you with tons of treads in G2 sections, that is outdated or do not work from the begging.
I am reading these in terrible english written treads for straight two days and still nothing that wort been read!
As a matter of fact I am not a noob or total beginner ether....
Click to expand...
Click to collapse
So what doesn't work? Most of the things just do work normally but you need ofcourse to have the right bootloader version/modem just like on other devices. English isn't the main language for everybody so their English isn't perfect and so is mine but your's isn't 100% correct either. But they do contribute to the community and that breaks the barrier of languages.
MixXx2005 said:
Nope. G2 community is so bad. No one give solutions, only ask for money , even steel credit card date. I love the phone, but the community is just terrible.
It is quite often that I found solution tread, first tree pages of comments are "nice work" , "good job" and so on , after fifth page real users actually give negative feedback. Now I am reading tread with 77 pages. I am in the middle and I still do not understand is it safe to use tutorial. And there are a lot of treads like this. XDA should give some rating possibility, to delete treads with wrong or not working properly solutions.
I am very disappointed in XDA.
Click to expand...
Click to collapse
MixXx2005 I don't know which threads you are in but I never had anybody ask me for money or steal credit card date? There might be people asking for money or idk exactly what all but that might be going on in the background especially. As some people brick their phone others want to unbrick it and ask money for shipping/not trying to destroy it. If you want to do it free then you have to do it yourself probably. The G2 community does give solutions but there were already so many Q&A threads or people who all ask the same question/don't read properly the threads that some people just don't react anymore.
I had read many unbricking/root tutorials when I just came to this community several months ago already and everything worked fine. Also the hardbrick fix method worked fine for me.
Btw if somebody steals your credit card date then why did you gave them it all? If you have those kinds of problems or want to report something about outdated content then just react on the thread, Contact the OP, and or in cases of scams and those stuff contact a moderator. Moderator and members don't always have time to check or everything is alright so people need to report the problems.
So about "I AM ANGRY DUE TO BAD TUTORIAL I BRICKED MY PHONE REAL BAD. "
You really have to read carefully for which G2 variant is was meant, it doesn't matter if you are experienced or not experienced people also make mistakes just like that I hardbricked my G2 after I left myself on an unrooted rom with no download mode and recovery.
If you can say the problem you have like what kind of bricks, more details then I could might help you for free. The thing it might only costs is time but that's worth it if you fix your brick into an working G2.
I will try to reply asap but school and some other stuff in life might make me forget this so if you have a question please quote or mention my name as I would only then receive a notification about it.
EDIT: I read your thread now about your qh_usb brick and I read the tutorial. The tutorial isn't misleading or whatsoever there could have been an issue due to drivers/binaries and or communication between your device and fastboot itself. The tutorial was also meant for if you had the same message on your screen.
Btw in which mode are you? QHUSB_BULK 9006 or 9008? About the exclamation marks do you have the proper drivers for it? You might need to install the drivers manually with device manager. If you can mention which mode then I could perhaps help. Maybe not immediately but I could probably help you to unbrick your phone .
wulsic said:
So what doesn't work? Most of the things just do work normally but you need ofcourse to have the right bootloader version/modem just like on other devices. English isn't the main language for everybody so their English isn't perfect and so is mine but your's isn't 100% correct either. But they do contribute to the community and that breaks the barrier of languages.
MixXx2005 I don't know which threads you are in but I never had anybody ask me for money or steal credit card date? There might be people asking for money or idk exactly what all but that might be going on in the background especially. As some people brick their phone others want to unbrick it and ask money for shipping/not trying to destroy it. If you want to do it free then you have to do it yourself probably. The G2 community does give solutions but there were already so many Q&A threads or people who all ask the same question/don't read properly the threads that some people just don't react anymore.
I had read many unbricking/root tutorials when I just came to this community several months ago already and everything worked fine. Also the hardbrick fix method worked fine for me.
Btw if somebody steals your credit card date then why did you gave them it all? If you have those kinds of problems or want to report something about outdated content then just react on the thread, Contact the OP, and or in cases of scams and those stuff contact a moderator. Moderator and members don't always have time to check or everything is alright so people need to report the problems.
So about "I AM ANGRY DUE TO BAD TUTORIAL I BRICKED MY PHONE REAL BAD. "
You really have to read carefully for which G2 variant is was meant, it doesn't matter if you are experienced or not experienced people also make mistakes just like that I hardbricked my G2 after I left myself on an unrooted rom with no download mode and recovery.
If you can say the problem you have like what kind of bricks, more details then I could might help you for free. The thing it might only costs is time but that's worth it if you fix your brick into an working G2.
I will try to reply asap but school and some other stuff in life might make me forget this so if you have a question please quote or mention my name as I would only then receive a notification about it.
EDIT: I read your thread now about your qh_usb brick and I read the tutorial. The tutorial isn't misleading or whatsoever there could have been an issue due to drivers/binaries and or communication between your device and fastboot itself. The tutorial was also meant for if you had the same message on your screen.
Btw in which mode are you? QHUSB_BULK 9006 or 9008?
Click to expand...
Click to collapse
Thanks for your replay.
After all day of reading tons of useless information finally unbrick my phone. Now it is fully functional again.
I will explain why I am mad.
1st after official update my phone start to act weird (now i know what caused it, and it do not matter), then after I try to flash stock FW I stuck at LG logo. I found two different tutorials and both of them showed contradictory steps, I decided to follow one of them and like I said get error and booting till LG logo.
Next due to bad tutorial I erase all partitions with fastboot. But in the tut. was not said anything about proper way to do it. So after that tut. I get real brick. Still everyone can brick their phone following it.
http://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033 (3. step - how can I know that I should modify provided code with my .img file path? Where is something said about it?)
Then I read FAMOUS "LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK]" . After that I tried to short out test pins. Again I found contradictory informations about test point locations.
To get any life in my dead phone ,I try them both, and luckily I did not damaged eMMC.
There are a lot of wrong information how you should act in different situations in these topics, and these things can permanently destroy your hardware and there are no highlights or any warning about it.
So after qh_usb brick win 7 was unable to detect drivers, but somehow randomly after several hours of search, I found correct Qualqomm drivers, after that the device manager showed connection with 9008 mode brick. Then after I read whole
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830/page42
5th page before end ,give me right tool to fix my phone. tons of contradictory info there - truly TONS.
I can give you treads , where people do not give right topics, but instead give their FB and later ask for money.
Also I can give you proofs about those who said that they will help you for free in TeamViewer and quietly install keyloggers.
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830/ (read this tread , somewhere in middle of it, there are a lot of proofs)
It took me around 15 h with intense bulls*it filtering to get my phone in order.
And the most annoying thing , is that this all, what I describe previously , could be done in 15 min, if there would be ONE normal tread.
If all other/bad/misleading treads would be deleted, then my troubles would not been started in 1st place.
But like I said before this G2 community is terrible from beginners point of view.
Ok here is one thing
1. before doing anything search ( I agree that you will find a lot of outdated threads -- not useless but mostly outdated)
2. There is a help section with people who will understand where the error is and try to help you out
3. Most of the people here ask a question, solve the issue and just write: "fixed", without writing how and possibly contributing
Honestly, If I were a mod I would just delete their useless threads, always thinking of themselves
There isn't any magic tool that will fit everyones needs, people who are new just click random
I hope you fixed the device
bender_007 said:
Ok here is one thing
1. before doing anything search ( I agree that you will find a lot of outdated threads -- not useless but mostly outdated)
2. There is a help section with people who will understand where the error is and try to help you out
3. Most of the people here ask a question, solve the issue and just write: "fixed", without writing how and possibly contributing
Honestly, If I were a mod I would just delete their useless threads, always thinking of themselves
There isn't any magic tool that will fit everyones needs, people who are new just click random
I hope you fixed the device
Click to expand...
Click to collapse
Thanks, everything is good now. But I disagree - there are a lot of wrong and often contradicting treads and a lot of people that make their salary due to this.
I think admins should ban a lot of users here and also implement some kind of tread and user ranking. Because there are also people that do not know anything( I my point of view, they are just helpful fools ,that do not understand what they can cause with their misleading information) ,but they tried to help by just posting random s*it they were hear somewhere else. And I as desperate beginner can make much worse brick by following the advice.
MixXx2005 said:
I can give you treads , where people do not give right topics, but instead give their FB and later ask for money.
Also I can give you proofs about those who said that they will help you for free in TeamViewer and quietly install keyloggers.
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830/ (read this tread , somewhere in middle of it, there are a lot of proofs)
.
Click to expand...
Click to collapse
What proofs of keyloggers? I read it but didnt found anything..
Vihru said:
What proofs of keyloggers? I read it but didnt found anything..
Click to expand...
Click to collapse
Post #63 and below it.
http://forum.xda-developers.com/showpost.php?p=57454159&postcount=63
I don't believe this happened. There would be more people involved in such opinions then.
Tbh the thread name of yours is kind of embarasing for people who create free stuff for everyone.
If you have any issues with any user on xda there are mods and admins and you can report them.
MixXx2005 said:
Nope. G2 community is so bad. No one give solutions, only ask for money , even steel credit card date. I love the phone, but the community is just terrible.
Click to expand...
Click to collapse
Odd.
Because I always found a solution for every problem I had, got an answer for every question. Even the most ridiculous ones.
So I disagree that the community is bad, quite the contrary. Every bit of info is here. You just have to read and understand what you've read.
And people here are nothing but helpful (most of them, at least).
P.S. as long as your G2 boots up, it is not bricked and it can be salvaged.
Hi everyone.
So I've been with this question in my mind for some time now... Are they really unbrickable? I have a ZTE Blade L3 on which flashed infinite times ROMs on it. Some completely bricked it - it couldn't even charge. It has a MT6582M processor on it. It was COMPLETELY bricked. And I always got it to work again. Never bricked it for good - and I did many stupid things on it, many experiments. And after a bit, SP Flash Tool would always flash stuff back to it even by flashing wrong ROMs on it.
I also believe I flashed a wrong ROM to a friend's Elephone P8000 B which has a MT6753 processor on it. I thought I had bricked it (this is why I think I flashed a wrong ROM on it) - but SP Flash Tool got back working after a few tries. I did what I wanted with the phone and it didn't brick.
So my thought is that ANY device with a MediaTek chipset with a ROM and a scatter file available and an always unlocked bootloader (preferably - as my Blade L3 had, I believe - since I never heard of this until weeks ago), might be unbrickable. I, supposedly, can do whatever I want on it and I'll always be able to unbrick it.
Is this true what I just wrote? If it is, then I'll try to never leave MediaTek powered devices.
Note: A thread confirmed this thought I had for some time until I found this thread, but it only says it about MT65xx devices, not all the others: https://forum.xda-developers.com/showthread.php?t=1943442 --> "Added on Nov 23, 2012 - MT65xx is truly UNBRICKABLE".
Note 2: Also....... After now reading back a bit of the thread, I found out I did exactly ALL the opposite they recommend there in caps and the phone always unbricked....... XD. So I'm a bit confused with all the careful people are about MediaTek powered devices when I was not careful (stupidly, I know), though it always worked. I have the phone since 2015 and stopped using it last year, but I believe I did the opposite of those things, even though I'm not completely sure. And again, never permanently bricked.
Thank you for any informations!
I'm not going to lie to you, your probably not going to get any other replies to the book you wrote above... I will answer your question however. There is not a single mobile device out there that cannot be unbricked as long as the issues that occurred to cause said brick remains at the software level. It don't matter what brand or carrier it is. If it is a software related issue then it can be fixed as long as you have the knowledge and tools required to do so. As for your experimentation using root, I have done many experiments myself and there are many many things you can do using root that will permanently brick your device. Sounds to me like you got lucky. Simple as that. I'll end this by saying, please do not post your entire relationship with your favorite phone in a single thread like you did. Nothing personal but many probably did not stay long enough to finish what you wrote. You have a valid question. However the rest was just unnecessary and to many, a waste of their time. Hope I helped.
Hi. I didn't even remember about this anymore. This last year I was told I write too much unnecessary things - just like you did. I've been trying to correct that and I believe I improved (no idea if much or not). When you said "the book you wrote" I got embarassed in advance because I knew what was going next, and when I scrolled up I got scared and even more embarassed and it's still increasing as I think more about it . Christ, how did I even post that. I'm very sorry........ I guess we learn as time goes by.... (hopefully haha). Hopefully now it's good enough. If it's still bad, I'll be happy to receive the advice, as I am with the one you gave. Thank you. For everything you said, actually.
Spoiler: Not needed, just curiosity of why I wrote it so big
EDIT: Just a small explanation of the why I wrote the text so big, which was I'd prefer to give all the informations right at the start so people can know exactly what was done and say things according to that. Instead of assuming I did things I might not have done and answer something that might not be correct in my case. But then I write a book and that's beyond stupid. So I've been trying to correct that. That's the wrong point of the view and I think I still need a bit more time, but hopefully I'm getting there - maybe I should start posting on Reddit hahaha. Posting things is not that old for me. Started a few years ago (21 years old - a bit late for my age, I guess, but I didn't go on Internet that much before).
My intent was not to embarass you. I apologize. I should have checked the date this was originally posted. I do hope i was able to answer your question though. That was my true intent.
Tofor said:
My intent was not to embarass you. I apologize. I should have checked the date this was originally posted. I do hope i was able to answer your question though. That was my true intent.
Click to expand...
Click to collapse
Ah no problem at all. Gotta be corrected in some way . That happens with me when I see an enormous stupidity made by me which I did not realize at the time - and this one is 5 months old, which puts it worse haha.
That shall work so I won't forget of not doing this again in the far future xD. Before, some people would tell me about and I'd notice it was a wall of text (like once a person told me). And I appreciate all those who warned me about it. Sooner or later I'll get to a decent amount of text, depending on the forum. I think I didn't know what a paragraph was, as a start xD (though, what you saw there was already an update....). It's still a big post, I think, but hopefully it's readable now. If it's not, I'll cut more of it.
But yes, you did answer the question. Thank you. But to complement it, if you remember, at least, what experiments with root can completely brick a phone? (So I know I won't try them, as a start, but it's also a curiosity.)
Well a good example of some things not to do is changing the system files to allow the device to operate at a level it was not designed to operate at. For example. Messing with the kernel to make the processor run at a higher speed, same goes for the RAM. This will cause it to overheat and will basically fry the system board. Also if you are not sure what you are changing then dont change them. Nothing like accidently changing the EFI settings to where it no longer knows where the internal storage addresses are and does not know it has any type of storage to boot to. However a lot of the efi should be copywrite protected where even a root user cannot modify them but trust me... its possible and may still be repairable but only by the manufacturer who has that level of access and definitely not worth what it would cost. Keep an eye on any files you modify for a copywrite at the top of the file. Changing copywrite files will most likely get you in a whole lot of trouble. If you end up having a web adress listed in the build.prop on every android device you own that brings you to the developers terms and conditions then stop messing with system files. This is more or less a warning telling you that you are breaking the terms and conditions. I would libe to continue but then i would be contridicting myself on my comment about very large messages in the forums. If you would like to know anything else please feel free to PM me and lets put an end to this thread lol.
Guys, speaking of devices with MT chipset, I have a Hannspad HSG1341 that was running Android 5.1 and wanted to root the pad using some tutorial I saw with magisk by installing the APK on this device which creates a modified boot.img. Then using SP Flash Tool I tried to reinstall the stock firmware by replacing the boo.img created by magisk and now the pad would not power on, I have tried searching for means to restore this pad but nothing. Even SP flash tool is now displaying s_ft_enable_dram failed (4032). So please off anyone has any idea how to resolve or is the pad dead for good. The chipset is MT8163. Let me know if you need more info to help out
thanks