Related
Hey everyone,
First post, n00b question - please be gentle.
First, I'll start with a positive. I have come from using an iPhone, and I was quiet comfortable with jailbreaking and cydia. I now have a Samsung Galaxy S 2 / II (GT-I9100T). I am from Australia, and on the Telstra network. Whoever is in the same boat would know it is quiet an adjustment, but you can root! (if you wanted to know).
I followed this persons 3 part guide and with sucess:
I cannot post the link but it is on YouTube and the video title is:
How To Root The Samsung Galaxy S II - Part 1
How To Root The Samsung Galaxy S II - Part 2
How To Root The Samsung Galaxy S II - Part 3
Username is mattj101101
I had Android 2.3.3 installed.
Second part is a question, is there any debranding roms / kernals that is ok for the GT-I9100T? I have tried the *#272*IMEI# but it only had 'Preconfig - TEL'
My phones info:
PDA: 19100TDVKF4
PHONE: I9100TDVKF2
CSC: I9100TTELFK3
My Kernal version, after the root is 2.6.35.7-I9100XWKDD-CL161513root<insertATsymbol>DELL103 #2
Hopefully with these answers I can help other fellow people out with this particular model (that are sold in Australia). Also if someone has the stock Telstra rom for re-flashing (if needed for warrenty) please point me in the right direction.
Thank-you.
Hey,
Ive got the GT-I9100T from Vodafone (both can run on the telstra bandwidth now ) and have had no issues flashing most roms. Only thing you may notice is the new modems aren't as good as the stock ones you currently have, so you may need to reflash the original modem through odin to get the best support.
Before you do flash though, make sure you back up your /efs folder, it contains the bin files for your IMEI for your phone, and people have reported flashing a rom can change that, so beware! also, before you do flash, try find the stock telstra rom for your phone incase you need to reflash. There are a few threads about it all, so good luck
The i9100T can use i9100 roms, but it will change the product code to i9100.
Easiest way to root is using CF-root, match the part of the version number in bold "PDA: 19100TDVKF4"
My phones info:
PDA: The rom/kernel
PHONE: The modem/radio, responsable for signal quality and speed, you dont need to match this to rom version, and the best way to find a good one is to test different ones.
CSC: APN settings and bundles apps, no need to match this, but if you do chose to all you may have todo is enter your APN settings for internet and MMS manually.
You can flash any rom onto any SGS2 via odin, see this guide, that will debrand etc.
Also, you rooted using a very old insecure kernel, people have had random reboots with that one, I suggest you flash back your stock kernel (you will keep root) or flash a version of cf-root (you will gain clockworkmod recovery, a way to flash roms/etc from your phone, and nandroid, a whole phone backup system, like snapshots)
I would recommend flashing DarkyRom2 on your S2. Runs fast, stable and great battery life. It roots your phone as well and changes your kernel to SuperCore which has a lot of optimisations.
Instructions:
Since you're not rooted (stock firmware/kernel)
1. Flash SuperCore_1.7.tar with Odin (put in PDA and do NOT tick repartition)
2. Get DarkyROM2 Tool and Superuser from market
3. Upload DarkyROM2_XXKH3_Base_R2.zip to SD-Card (INTERNAL)
4. Open DarkyROM2 tool. Accept SuperUser access request notification (this confirms you are rooted.
4. Under the DarkyRom tab, be sure "Wipe User data" is selected AND "INSTALL MODEM" is NOT SELECTED. (this will wipe everything from your phone but keep your stock KF4 modem. Any other modem causes signal problems for our I-9100T. )
5. No need to select "Install Kernel" Since SuperCore 1.7 is already installed.
5. Go back to the General Tab and use "Flash/Install File from SDCARD" to browse to and install DarkyROM2_XXKH3_Base_R2.zip
6. Wait for the phone to reboot and flash the new firmware
Get the files here:
http://www.darkyrom.com/community/index.php?threads/rom-cwm-sgs2-darkyrom2-kh3-base.4950/
I modified the instructions given on that link and posted it above for you since it's a little different for our I-9100T phones.
more info on I-9100T here:
http://forum.xda-developers.com/showpost.php?p=16824749&postcount=10
Interestingly, I just purchased a SGS2 here in Thailand (I'm also an Aussie) and the model of the phone is GT-I9100T.
Unfortunately I cannot seem to find a KL2 kernel for CF-Root to patch it with... any suggestions?
Also, the site that held all the OEM kernels (MultiUpload) for download is now showing a "Shut down by the FBI" logo : )
As long as you're certain you've got a I9100T, use the KL1 CFRoot kernel. Will work fine.
ApriliaM3 said:
Interestingly, I just purchased a SGS2 here in Thailand (I'm also an Aussie) and the model of the phone is GT-I9100T.
Unfortunately I cannot seem to find a KL2 kernel for CF-Root to patch it with... any suggestions?
Also, the site that held all the OEM kernels (MultiUpload) for download is now showing a "Shut down by the FBI" logo : )
Click to expand...
Click to collapse
My phone details are as follows:
Model: GT-I9100T
Android: 2.3.6
Baseband: I9100TDCKL1
Kernel: 2.6.35.7-I9100TDCKL2-CL767350 [email protected]#2
Build: GINGERBREAD.DCKL2
This is not an Aussie phone such as the Telstra I9100T that I see spoken about.
I purchased this phone here in Thailand 3 days ago and I have a few questions.
1. Is there a way to backup the original kernel before rooting?
2. Will the KL1 kernal make me lose things such as Thai language options etc?
3. Any way to restore the KL2 kernel in the future?
Thanks for taking the time to reply!
MistahBungle said:
As long as you're certain you've got a I9100T, use the KL1 CFRoot kernel. Will work fine.
Click to expand...
Click to collapse
1) Doubt it. And the only link for DCKL2/Thailand in Intra's official firmware thread is dead as it was MegaUpload, and he more than likely won't have a backup (you could always ask him tho). Search around elsewhere online, you might find a copy of this kernel somewhere.
2) I don't know for certain, but I don't think so. I would have thought something like language would be more firmware-related.
3) Refer to 1) I don't see why you'd need to ? In order to get warranty service from Samsung, all you'd need to do is flash the most recent firmware available for your phone (for all they know you could easily have got this from an OTA update via Kies), do a factory reset/make sure there's no apps left on your phone that could tip off whomever repairs it that the phone was rooted, and use a jig to reset the flash counter. Obviously there are no rolled gold guarantees with getting warranty service once you've voided same by rooting the phone/running non-stock firmware firmware on it, tho.
ApriliaM3 said:
My phone details are as follows:
Model: GT-I9100T
Android: 2.3.6
Baseband: I9100TDCKL1
Kernel: 2.6.35.7-I9100TDCKL2-CL767350 [email protected]#2
Build: GINGERBREAD.DCKL2
This is not an Aussie phone such as the Telstra I9100T that I see spoken about.
I purchased this phone here in Thailand 3 days ago and I have a few questions.
1. Is there a way to backup the original kernel before rooting?
2. Will the KL1 kernal make me lose things such as Thai language options etc?
3. Any way to restore the KL2 kernel in the future?
Thanks for taking the time to reply!
Click to expand...
Click to collapse
I was just worried it might stop future updates to ICS or similar via Kies.
At least I think I've managed to find another copy of the latest kernal on a site other than MegaUpload...
It's at 50% and counting : )
3) Refer to 1) I don't see why you'd need to ? In order to get warranty service
Running a CFRoot kernel over stock firmware should still allow you to receive OTA updates via Kies. If you find it doesn't, simply use Checkfus (search for it on here), it allows you to find/download the latest firmware for your phone/country that you'd normally get via Kies.
Really ? Cool Might wanna post a linky to your source over in Intra's thread. I'm sure there will be other people who might need it at some stage.
ApriliaM3 said:
I was just worried it might stop future updates to ICS or similar via Kies.
At least I think I've managed to find another copy of the latest kernal on a site other than MegaUpload...
It's at 50% and counting : )
3) Refer to 1) I don't see why you'd need to ? In order to get warranty service
Click to expand...
Click to collapse
Ok so would you believe...
I ran the guide from Intra.
Installed an insecure ROM and then ran SuperOneClick and was rooted.
I restored the OEM kernel that I found online and BINGO - UNROOTED!
I repeated the procedure just to check everything again... same deal!
Phone is currently unrooted again...
MistahBungle said:
Running a CFRoot kernel over stock firmware should still allow you to receive OTA updates via Kies. If you find it doesn't, simply use Checkfus (search for it on here), it allows you to find/download the latest firmware for your phone/country that you'd normally get via Kies.
Really ? Cool Might wanna post a linky to your source over in Intra's thread. I'm sure there will be other people who might need it at some stage.
Click to expand...
Click to collapse
Yeah, if you flash an original (unrooted) kernel over your rooted kernel you'll lose root.
There's a procedure for removing the yellow warning triangle at boot in the CFRoot thread & also retaining root, but I found it too fiddly when I first rooted my phone so I simply bought a jig & did it that way.
I can't speak for anything to do with SuperOneClick as I've never used it.
ApriliaM3 said:
Ok so would you believe...
I ran the guide from Intra.
Installed an insecure ROM and then ran SuperOneClick and was rooted.
I restored the OEM kernel that I found online and BINGO - UNROOTED!
I repeated the procedure just to check everything again... same deal!
Phone is currently unrooted again...
Click to expand...
Click to collapse
Apparently so... now I'm confused about what the guide was trying to achieve.
Also, Kies now tells me it's not compatible with my device... Perfect!
MistahBungle said:
Yeah, if you flash an original (unrooted) kernel over your rooted kernel you'll lose root.
QUOTE]
Click to expand...
Click to collapse
As I said, I have no idea whatsoever about anything to do with SuperOneClick. If you want a rooted phone minus the yellow warning triangle at boot without fiddling around, root it with a CFRoot kernel, buy a $3 jig from eBay, done.
So far as Kies not working, you could try uninstalling/reinstalling Kies, or simply use Checkfus as I've said previously. Me, I'd use Checkfus. Quick, easy & like the paragraph above, no fiddling around.
Edit to add - Yes, obviously Kies won't work if you're running an "insecure rom" as per your post above. I presume you mean a custom rom you found somewhere on here or elsewhere ? One of my earlier posts did say Kies should (not always) work if you're running a rooted kernel over a stock Samsung rom. If you're running a non-stock rom Kies won't work.
ApriliaM3 said:
Apparently so... now I'm confused about what the guide was trying to achieve.
Also, Kies now tells me it's not compatible with my device... Perfect!
Click to expand...
Click to collapse
ApriliaM3 said:
Apparently so... now I'm confused about what the guide was trying to achieve.
Also, Kies now tells me it's not compatible with my device... Perfect!
MistahBungle said:
Yeah, if you flash an original (unrooted) kernel over your rooted kernel you'll lose root.
QUOTE]
Click to expand...
Click to collapse
Ditch Kies there is a better alternative out there. MyphoneExplore, do a seach via google. You'll also need to get the app client software from the android market. I use it to synch my work Outlook Calendar to my phone. You can also back up your contacts, sms and call records.
Click to expand...
Click to collapse
Edit: I tried CF-Root KL3 (wanted KL2) and it seems fine so far.
I have root and everything else seems the same (Thai language support etc.)
I'll keep you posted : )
Thanks for taking the time to deal with my issues!
Hope I can do the same for some others on this Forum in the future.
I'd not heard of Checkfus so I'll give that a try, thanks : )
There's no CF-Root to match my phone exactly but I guess there's nothing to lose now by trying something close : P
I ordered the jig almost a week before getting the phone but it seems the postage to Thailand is sloooow.
I'm running a stock ROM and unrooted but Kies is still misbehaving.
MistahBungle said:
As I said, I have no idea whatsoever about anything to do with SuperOneClick. If you want a rooted phone minus the yellow warning triangle at boot without fiddling around, root it with a CFRoot kernel, buy a $3 jig from eBay, done.
So far as Kies not working, you could try uninstalling/reinstalling Kies, or simply use Checkfus as I've said previously. Me, I'd use Checkfus. Quick, easy & like the paragraph above, no fiddling around.
Edit to add - Yes, obviously Kies won't work if you're running an "insecure rom" as per your post above. I presume you mean a custom rom you found somewhere on here or elsewhere ? One of my earlier posts did say Kies should (not always) work if you're running a rooted kernel over a stock Samsung rom. If you're running a non-stock rom Kies won't work.
Click to expand...
Click to collapse
Something may have borked so far as the CSC goes (which tells Kies, the Market, etc where you are). I did say you should be able to use Kies, you're not the first person to have problems with it after rooting
Personally speaking, I've never used Kies & almost certainly won't use it. Ever. Custom roms/kernels are a piece of you know what to flash via CWRecovery (or Odin for that matter), and official firmware updates are easy to get with Checkfus & flash via Odin if I ever have to go down that path for warranty purposes or whatever.
Kies is a truly awful piece of software
Edit to add after your edit - No worries
ApriliaM3 said:
I'd not heard of Checkfus so I'll give that a try, thanks : )
I'm running a stock ROM and unrooted but Kies is still misbehaving.
Click to expand...
Click to collapse
Yeah Kies is dodgy...
When I got home I plugged it into Kies on the home PC and everything was fine!
Have you experimented much with any Custom ROM's?
MistahBungle said:
Something may have borked so far as the CSC goes (which tells Kies, the Market, etc where you are). I did say you should be able to use Kies, you're not the first person to have problems with it after rooting
Kies is a truly awful piece of software
Click to expand...
Click to collapse
Hi there can't post in Development so here will have to do...
Ex SE Satio user moved over to android SGS2 and got one late last year from CPW (Car Phone Warehouse), Unlocked and with cpw stock firmware, I think it was XEU or one of the general ones, I rooted it using odin and was happy as larry, until the proximity chip failed, so I rehashed it back to Out Of Box and sent it back.
Great Then then sent it back with a different firmware, I'm still getting my head together with this but I'm sure I cant find it? and there is hardly anything online about it.
PDA:I9100XWKD6
PHONE:I9100XXKDA
CSC:I9100CPWKD1
18/4/11
I wan't to root my phone, but can't find anything about, I could flash a different ROM on but then I wouldn,t be able to Back up if the hardware fails.
Thank You
leeackky said:
Hi there can't post in Development so here will have to do...
Ex SE Satio user moved over to android SGS2 and got one late last year from CPW (Car Phone Warehouse), Unlocked and with cpw stock firmware, I think it was XEU or one of the general ones, I rooted it using odin and was happy as larry, until the proximity chip failed, so I rehashed it back to Out Of Box and sent it back.
Great Then then sent it back with a different firmware, I'm still getting my head together with this but I'm sure I cant find it? and there is hardly anything online about it.
PDA:I9100XWKD6
PHONE:I9100XXKDA
CSC:I9100CPWKD1
18/4/11
I wan't to root my phone, but can't find anything about, I could flash a different ROM on but then I wouldn,t be able to Back up if the hardware fails.
Thank You
Click to expand...
Click to collapse
I also failed to state that its...
2.3.3 and Kies say's "THERE WILL BE NO MORE UPDATES FOR THS PHONE."
???
Well if you want to root flash a cf root kernel via odin from the original development thread.
Also check out infratechs thread to see if he has this firmware there incase you need to revert back, once rooted just make a backup via CWM either via recovery mode or using the CWM app that comes with cf root.
Sent from my GT-I9100 using Tapatalk
Hi mate and Thank You for your quick reply. I've scoured the threads and the closest I've found is..
XWKDD
Firmware info
PDA:XWKDD
PHONE: XXKDH
Build date: 26/04/2011
Generic XEU
But I thought that when you rooted your device it had to be identical, I could flash Ice Cream, but then I wouldn't have anything to back up to if my device blobs?
O2 say's I shouldn't have this firmware and so does Samsung, Kies actually said..
"Your device does not support software upgrading via kies"
I's that odd?
Don't worry about it, if you've got an o2 model just flash the latest UK firmware for o2, again in infratechs thread or maybe sammobile. You can flash o2s CSC anyway that will give you back the splash screen and such.
For now if you want to root, cf root is the easiest then flash away using CWM any of the plethora of roms available.
I suggest you flash a stock rom from Infratechs thread so you can update to the latest if you want LA2, then use CF Root to root. Then if you want ICS just flash that via CWM.
You can also use Checkfus (search on here) to find/download the latest firmware for your phone/carrier.
leeackky said:
=
O2 say's I shouldn't have this firmware and so does Samsung, Kies actually said..
"
PDA:I9100XWKD6
PHONE:I9100XXKDA
CSC:I9100CPWKD1
Its not O2 firmware its CPW firmware CPW is the clue
KD was a very very old firmware May 2011
What has the firmware to do with O2 its not an O2 phone .
UPGRADE CHOICES
One ask CPW service for an upgrade
Two wait for KIES upgrade if CPW upgrade KIES .
Their should be a CPW firmware and most definitely an O2 Firmware in the branded providers rom section .Or via CheckFus that should give you a backup of whats on the phone .
Carrier branded .
http://forum.xda-developers.com/showthread.php?t=1113928
or flash a stock 2.3.5 or 2.3.6 XEU from the stock roms thread
jje
Click to expand...
Click to collapse
As you said JJe, it is a CPW rom, and I knew it was an old one, but it's odd that CPW are sending refurb phones out with such an old ROM on it. I've decided to bite the bullet and go with the original ROM that I got with my first phone...
Product Code: GT-I9100LKACPW
Version: Android 2.3.3
HIDSWVER: I9100XWKE7/I9100CPWKD1/I9100XXKE4/I9100XWKE7
Bypassing this and going for...
I9100XWKI4/I9100CPWKH1/I9100XXKI1/I9100XWKI4 (2.3.4)
This is the original firmware plus KIES update to 2.3.4! I know that CPW were sending NEW phones out with this, so this will have to be my BackUp If my hardware blobs.
I'ts a shame I couldn't find the original ROM/Kernel. Checkfus did come in handy after all.
Many thanks for your help and patience you 3.
Now I just got to cope with FBI shutting down MEGAupload, as most of the Rom's etc reside there.
hey ya, lets say someone i know (wink ;D) is employee at carphone warehouse, and to tell you a fact, the repair centres tend to care very little if youve changed the firmware, at most they will charge you £10 to 'upgrade' the software to the latest official release, if you cant find it, i really wouldnt worry to much, most staff dont even realise what the yellow non stock firmware triangle is, though i would be sure to get rid of it just incase you get one clever clogs but for the most part, no big worry really
Just my luck flashed new ROM and i'm gettin "The process.com.android.phone has stopped unexpectedly. Please try again" every 5 minutes when i'm navigating through menus and that.
leeackky said:
Just my luck flashed new ROM and i'm gettin "The process.com.android.phone has stopped unexpectedly. Please try again" every 5 minutes when i'm navigating through menus and that.
Click to expand...
Click to collapse
Make sure you have wiped data/cache and dalvik cache via recovery (If you have CWM recovery) otherwise pick a rom from the stock rom thread that says wipe, flash it via odin, then flash the new rom you want.
Just my luck flashed new ROM and i'm gettin "The process.com.android.phone has stopped unexpectedly. Please try again" every 5 minutes when i'm navigating through menus and that.
Turns out that it's incompatible with my sim card, the phone works fine when I remove it, but as soon as I put my sim back in I get the same error?
CF-rooted fine,CWM etc ok, but still this error, might have to try another ROM
Sussed It!
Flashed to XXI1, then flashed the CF-Root Kernel and wiped it, looked like veyka, it was my Backup that I was Restoring, because now it works fine with the SIM card, something from the Backup from that ROM was incompatible with XXI1!
Got just a DATA backup on CWM from main backup, will see what I can restore safely!
Got Yellow Triangle, no Jig. will try SuperOneClick method
Trial and error eh?
Thank you again. (buttons pressed.)
Well it's regarding rooting.
I heard it opens up a world of opportunity with your smartphone, and some apps I really want are only available vain rooted phones. I have the Samsung galaxy s3 international version. It was originally from Australia if that matters at all. It is on 4.0.4. Anyways, being a noob to android more or less, and being a bit apprehensive (because I have no warranty and I cannot obtain another phone easily) I was wondering basically how risky it is to brick your phone in a) the process of rooting your phone. Is it common? If it does get bricked is it reversable by a restore or simply gone? Also after rooting, is there any upkeep or management I need to do to make sure my rooted phone does not screw up? And lastly. What is the safest and easiest way to root the international quad core gs3 on ics. Thank you to everyone for your time
mysticgorilla said:
Well it's regarding rooting.
I heard it opens up a world of opportunity with your smartphone, and some apps I really want are only available vain rooted phones. I have the Samsung galaxy s3 international version. It was originally from Australia if that matters at all. It is on 4.0.4. Anyways, being a noob to android more or less, and being a bit apprehensive (because I have no warranty and I cannot obtain another phone easily) I was wondering basically how risky it is to brick your phone in a) the process of rooting your phone. Is it common? If it does get bricked is it reversable by a restore or simply gone? Also after rooting, is there any upkeep or management I need to do to make sure my rooted phone does not screw up? And lastly. What is the safest and easiest way to root the international quad core gs3 on ics. Thank you to everyone for your time
Click to expand...
Click to collapse
Well, most you could pick up be reading a bit, everything is already explained around here but since i was in your shoes very recently:
- there's always a risk. You need to be aware of that. That said, most cases that actually go wrong it's usually user's fault who failed to follow instructions closely. So read them. And read some more. And then read again just to make sure. And then i'd read again.
I used this very recent method from chainfire (salute and donate to the man if you like and can, he deserves it) to root my 4.0.4 international GT-I9300 S3:
http://forum.xda-developers.com/showthread.php?t=1957273
Triangled away next and everything worked like a charm. This preserves everything as stock as possible just adding root to your phone.
- from what i can tell, as long as you don't do anything that messes with the bootloader, you can always recover from a procedure gone wrong. Just disconnect, remove battery, insert and try again. Rebooting the computer or changing usb ports usually helps too (on odin).
- after rooting successfully, the very first thing you should do is backup your /efs folder. This is easy, just pick up root explorer or some other file manager that allows exploring you root (/), go up in your folders until you get to / look for the efs folder and just copy it (NOT MOVE) elsewhere (sd card, external sd, your computer preferably, whatever, just have that safe). This will come in handy in case you lose your imei at some point. Just restore this folder's contents and you're good to go. If that happens and you don't have a backup, it's a f'ing pain you can do well without.
- anything else root related is just common sense. Since you have the potential to screw up your entire phone with root permissions (this is why you don't have them in the first place), if an app pops up asking for root permissions, be sure what it is before allowing. If you're not sure, you can always deny first and allow later in the superuser app.
- you can also look into backing up with nandroid. You can think of this as an image of your entire phone. With this you can restore your phone to the same state it was when you did it. Useful when something went wrong and your phone doesn't boot anymore or you just wanted to try new roms with the option of coming back to what you had before. Not sure how you do it on the S3 still, but it usually requires a modified recovery like CWM. The method to root above doesn't install one though, it preserves what you had. Check this instead if you're interested:
http://forum.xda-developers.com/showthread.php?t=1695238
Cheers dude, i'm sure everything will go well for you too.
Chance of a brick about .0001 % rising to 100% for those that are to lazy to read follow instructions .
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Thankyou very much to everyone who has read and replied to this. 3 more minor questions. Is there a way to first update my phone to jellybean 4.1 via Odin or something like that? Or is this possible after root, because I don't want to stay on ics. Also what exactly happens if I update while rooted. Does it wipe or unroot my phone or the like? Also should my phone be in use debugging, and lastly what does it mean to unlock my bootloaders? That was more than 3 questions sorry thanks again
mysticgorilla said:
Thankyou very much to everyone who has read and replied to this. 3 more minor questions. Is there a way to first update my phone to jellybean 4.1 via Odin or something like that? Or is this possible after root, because I don't want to stay on ics. Also what exactly happens if I update while rooted. Does it wipe or unroot my phone or the like? Also should my phone be in use debugging, and lastly what does it mean to unlock my bootloaders? That was more than 3 questions sorry thanks again
Click to expand...
Click to collapse
1) You don't need to root to update to JB.
Just download any ROM you want from http://samsung-updates.com/device/?id=GT-I9300 (I recommend the UK unbranded ROM, BTU) then use Odin3 to flash it to your devices. Search the forums for specific instructions on this procedure. I'll just tell that it takes no more than 2-3 minutes.
2) If you're going to root, I suggest you do it beforehand, by flashing a kernel like Siyah (in ICS), and then proceed to flashing the stock JB ROM, HOWEVER, instead of using Odin3, you will use MobileOdion (available from Play Store), because that way you'll have a fully rooted and stock device.
3) Using step 2 above, it will not wipe not unroot your phone. It is safe and retains all your settings. That is the beauty of MobileOdin. There is a free version.
If you root and THEN install via Odin (PC), then you'll lose root, but not your settings.
In either case, you only wipe the device IF YOU WANT TO.
So, the best option is to:
a) Install SiyahKernel using Odin3 (PC)
b) Download the JB BTU ROM from http://samsung-updates.com/device/?id=GT-I9300
c) Extract the .md5 from the ZIP file and move it to the device's ext. sd card
d) Install MobileOdin in the device
e) Use MobileOdin to flash the .md5 you moved to it in step (c)
f) install TriangleAway (download from XDA) and run it to reset binary counter (which got incremented in step [a] )
Results: rooted, JB, stock, all settins retained, no binary counter increment
Simonetti2011 I have been searching the internet here in New Zealand and that has been the best answer I have found so far!
I do have a slight question thought. I live in New Zealand and have the GT-I9300T model of the GS3 and I'm wanting to install the international unbranded rom for that I can get updates faster (here in NZ it takes months and months to get updates)
I downloaded the International UK unbranded firmware 4.0.4 and was going to flash that rom onto my phone then upgrade to jelly bean via kies but have since relised I should just download the jellybean UK firmware straight away. Do you by any chance havea link to the firmware that I would need, I noticed there were a few different versions.
Also about the CSC, would I need to do any changes?
Many many thanks in advance, Sorry for hijacking this thread, just figured I was on the same pages as the OP
prawln said:
Simonetti2011 I have been searching the internet here in New Zealand and that has been the best answer I have found so far!
I do have a slight question thought. I live in New Zealand and have the GT-I9300T model of the GS3 and I'm wanting to install the international unbranded rom for that I can get updates faster (here in NZ it takes months and months to get updates)
I downloaded the International UK unbranded firmware 4.0.4 and was going to flash that rom onto my phone then upgrade to jelly bean via kies but have since relised I should just download the jellybean UK firmware straight away. Do you by any chance havea link to the firmware that I would need, I noticed there were a few different versions.
Also about the CSC, would I need to do any changes?
Many many thanks in advance, Sorry for hijacking this thread, just figured I was on the same pages as the OP
Click to expand...
Click to collapse
Thanks!
The 9300T and the 9300 are NOT the same device, therefore they use different firmware (ROM). The ROMs for the 9300T are here: http://samsung-updates.com/device/?id=GT-I9300T
I don't think there is a 9300T ROM for the UK, since the model released there is the 9300 (non-T).
It seems that either Samsung-updates hasn't indexed any ROMs for your model or they haven't been released.
About CSC: just don't worry about it... download and flash any ROM you want for your specific model and don't worry. If you don't like it, just download and flash another one.
Thanks heaps for that!
I actually just tried the UK unbranded rom that was for the i9300 on my i9300T and suprisingly everything seems to work ok so far (phone calls, txting, 3g etc)
Thankyou to everyone!
Thank you for your responses to my post regarding rooting my s3. They were very helpful. i succesfully rooted via chainfire cf auto root for the I9300 model without problem. Just one last question, I have been searching around a bit and some people are saying that flashing the jellybean firmware via odin, is not a perfect copy.. i mean some say they have been experiencing very minor problems here and there. So, if i update to the uk firmware on jelly bean via odin or mobile odin, and i experience some problems, can i still get the official ota update or jellybean 4.1 via kies when it is released? Thanks again for your help. Im pretty new to this android stuff
I need to get my device to 2.3, but I can't find the download I need and i cant find my csc code *#1234# or what ever it is doesn't work for me. My device is rooted. Please I really need to get to 2.3 quick, If anyone can help me it would be great thanks. I'm a noob to this but I have rooted my phone and know what to do with odin. I just need to know where to download my firmware.
Go to Samfirmware, use the pulldown boxes to find a GB stock rom for your carrier/country (the other sites link back to Samfirmware's files in almost all cases), download it, flash it with Odin. Tho you may have trouble getting 2.3 - that's ancient.
Also, if you're returning the phone for a warranty claim, you do not need to go back to 2.3, irrespective of what you may think or what you may have been told. You simply need to make sure you have any rom for your carrier/country on your phone (you could flash the latest JB rom released by your carrier, for example), your flash counter is reset, do a factory reset once you've flashed the rom just in case, and send it off.
Hi all,
I am a newbie and don't know much. So please bear with me.
I was trying to root my Galaxy S5(SM-G900H) by using the tutorial given on http://forum.xda-developers.com/showthread.php?t=2696537 but the process did not go as planned as keep struck on recovery.img on odin3.10 so I googled and found that changing USB port will help so I take out the battery changed the port and try again but this time I soft-bricked the phone as odin struck on cache.img and now when i try to start my phone I get Firmware upgrade encountered. So now I again googled and found about unified toolkit and install it on my windows 10 ,now when i choose option 6 (i.e. flash stock boot image to your device) it says waiting for usb debugging to be enabled ,now I remember I turn USB debugging on but it is still struck here. Now what should I do? My parents gave this phone just a week ago and I am in deep trouble.
P.S.-I am only able go into the download mode not recovery mode.
Boot into Download Mode and use Odin to install the original firmware. Might require a factory reset after if still bootlooping. Here is a link to 6.0.1 from Sri Lanka https://mega.nz/#!YMAFhR4a!pZmf7OEWgzDzET1FLGsAOQ5XyVlvE8y4pJfB8KDNbMI . Any region firmware should work for the F model. If you want your specific one then check sammobile.com. I just linked to the other because it is a much faster download.
Problem encountred while installing original firmware
I tried to use Odin to install original firmware , I started the process but Odin got struck on sboot.bin (Also I read somewhere that whole process does not take more than 10 minutes). So please help me.
Which firmware did you try?
You might be able to use Kies to recover your device as well.
es0tericcha0s said:
Which firmware did you try?
You might be able to use Kies to recover your device as well.
Click to expand...
Click to collapse
I downloaded it from http://www.teamandroiders.com/samsung-galaxy-s5-sm-g900h-stock-rom-firmware/ with PDA: I9500XXUBOL2. I want to know one more thing as I am in India so should I use INU or INS?
ratcoder said:
I downloaded it from http://www.teamandroiders.com/samsung-galaxy-s5-sm-g900h-stock-rom-firmware/ with PDA: I9500XXUBOL2. I want to know one more thing as I am in India so should I use INU or INS?
Click to expand...
Click to collapse
Oh geez...no wonder it isn't working. i9500 = S4. Really gotta be careful with that kind of thing.
INU is for unlocked from the factory
INS is for phones from a carrier
Either one should work. As mentioned, with the G900h, any firmware should work that is for that model, no matter the region. Use the one I posted and change the language or grab the one for India from sammobile.com though it'll take an hour or 2.
Edit: I see that it was just mislabeled as i9500, but the download says g900h after all.
Were you on 5.1.1 or 5.0 before you started this process?
es0tericcha0s said:
Oh geez...no wonder it isn't working. i9500 = S4. Really gotta be careful with that kind of thing.
INU is for unlocked from the factory
INS is for phones from a carrier
Either one should work. As mentioned, with the G900h, any firmware should work that is for that model, no matter the region. Use the one I posted and change the language or grab the one for India from sammobile.com though it'll take an hour or 2.
Edit: I see that it was just mislabeled as i9500, but the download says g900h after all.
Were you on 5.1.1 or 5.0 before you started this process?
Click to expand...
Click to collapse
Well I downloaded another one from http://firmwarefile.com/samsung-sm-g900h the second one, before it all started I was on 5.0 and the link you give does not work anymore. Anyway I tried with the firmware with upper link. And Odin is struck with sboot.bin for more than an hour. And have no idea what's going on? So what should I do?
Also someone suggested to use Pit. Should I use it?
No, don't use the pit. Try the newer firmware for 6.0
es0tericcha0s said:
No, don't use the pit. Try the newer firmware for 6.0
Click to expand...
Click to collapse
So I downloaded the 3rd link from http://firmwarefile.com/samsung-sm-g900h for newer version and try Odin 11.2 with it. I try two times to flash the firmware first time it struck on sboot.bin and second time it just showed fails(I used Odin with administrative rights this time) .Please see the attached images. Please tell me what should I do now. I want to repair it ASAP.
Not sure. This is pretty standard stuff. Have used Odin 1000 times and haven't had that much trouble with it. Sorry.
es0tericcha0s said:
Not sure. This is pretty standard stuff. Have used Odin 1000 times and haven't had that much trouble with it. Sorry.
Click to expand...
Click to collapse
I think I should mention that the firmware I used was INS not INU and if you have a genuine link for version 6 for INU with fast download speed, please share it (different than sammobile because it has only fast speed only for premium users). Should I use PIT or try something else than Odin. Anything that might help please tell me. I have got this phone just a week ago and my parents are not gonna give me a new one so please help me.
I keep encountering sboot.bin error ,maybe there is a way to resolve it?
I'd just try to load TWRP and a custom rom at this point.
es0tericcha0s said:
I'd just try to load TWRP and a custom rom at this point.
Click to expand...
Click to collapse
Actually I have no idea what TWRP is so any link or anything that can help without ruining the situtation.
http://forum.xda-developers.com/galaxy-s5/development/rom-t3224562
es0tericcha0s said:
http://forum.xda-developers.com/galaxy-s5/development/rom-t3224562
Click to expand...
Click to collapse
I want to know one more thing on the above link there is a custom firmware and there is a custom ROM with bootloader and all. So should I flash custom firmware or use the instructions given on thread to flash custom ROM?
The custom rom does not include bootloader and modem. You will need to flash via Odin if you were not on the same firmware as the software is based off of. I would flash them anyway, to be safe. You can skip the root part as it is not need. Follow the instruction in post 2 for stock rom users minus the root part. Make sure to boot directly back into TWRP recovery before it attempts to boot. You can load rom on SD card and any additional add-ons you want. Plenty of youtube guides on how to use Odin to flash TWRP and such.
es0tericcha0s said:
The custom rom does not include bootloader and modem. You will need to flash via Odin if you were not on the same firmware as the software is based off of. I would flash them anyway, to be safe. You can skip the root part as it is not need. Follow the instruction in post 2 for stock rom users minus the root part. Make sure to boot directly back into TWRP recovery before it attempts to boot. You can load rom on SD card and any additional add-ons you want. Plenty of youtube guides on how to use Odin to flash TWRP and such.
Click to expand...
Click to collapse
Finally seen some progress, thank you very much. I successfully flashed TWRP recovery, but I got a couple of questions. Firstly I should flash ROM from recovery mode and then go to download mode to flash boot-loader and Modem files right? Should I flash ROM from SD card? And if this custom ROM causes problem is there a way to get to stock ROM? And is this custom ROM rooted or I have to root it via CF-Auto root or try anything else?
Rom might work without bootloader and modem. Just depends on your previous firmware. I would try and flash it though as it was recommended. Rom flash from SD card or internal. Either way should work. You will be able to go back to stock if you can find a firmware that works. It is already rooted.
es0tericcha0s said:
Rom might work without bootloader and modem. Just depends on your previous firmware. I would try and flash it though as it was recommended. Rom flash from SD card or internal. Either way should work. You will be able to go back to stock if you can find a firmware that works. It is already rooted.
Click to expand...
Click to collapse
Thank you very much.phone is working again with custom ROM.just one more thing if I upgrade from custom ROM what will happen?
:good::highfive::victory:
It should work to reflash the original firmware through Odin. Just get the one that matches your baseband version.