Related
New member but long time lurker.
Hoping somebody can help with a UK Nabi issue
I have previously used nabi lab to flash, root and install gapps. This worked great until I got a mail about the UK OTA. I then started to search for my stock back up and remember losing it in a hard drive disaster.
This led to updating using what I could find and nabi lab. End result at one point being Nabi reporting US Nabi version
Long story short. Managed to find another thread with a UK stock backup v2. Got this loaded and can update to v2.1 with no issue. Then I tried to go to v2.2 and I constantly get the dead android. And back to 2.1
The nabi has been wiped several times and at one point had no OS at all. I used the stock recovery in nabi lab and now wondering if the recovery files have an influence on the OTA? I have read that the earlier forcing gapps may have wiped some files needed for the OTA although I would assume that the very action of wiping everything via TWRP would have got around this I.e restoring via stock would have put them back on?
The nabi is currently running fine on v2.1 but can't get to 2.2 despite trying to find every solution found via search. Would have posted in the nabi section but don't have enough posts yet
Thanks in advance
Ste
Ste_J said:
New member but long time lurker.
Hoping somebody can help with a UK Nabi issue
I have previously used nabi lab to flash, root and install gapps. This worked great until I got a mail about the UK OTA. I then started to search for my stock back up and remember losing it in a hard drive disaster.
This led to updating using what I could find and nabi lab. End result at one point being Nabi reporting US Nabi version
Long story short. Managed to find another thread with a UK stock backup v2. Got this loaded and can update to v2.1 with no issue. Then I tried to go to v2.2 and I constantly get the dead android. And back to 2.1
The nabi has been wiped several times and at one point had no OS at all. I used the stock recovery in nabi lab and now wondering if the recovery files have an influence on the OTA? I have read that the earlier forcing gapps may have wiped some files needed for the OTA although I would assume that the very action of wiping everything via TWRP would have got around this I.e restoring via stock would have put them back on?
The nabi is currently running fine on v2.1 but can't get to 2.2 despite trying to find every solution found via search. Would have posted in the nabi section but don't have enough posts yet
Thanks in advance
Ste
Click to expand...
Click to collapse
I posted a question 2 days ago- can't even do first update so I'm following this with interest in the hope of getting info on how to unroot and just do ota updates with no dead android.
Floralina123 said:
I posted a question 2 days ago- can't even do first update so I'm following this with interest in the hope of getting info on how to unroot and just do ota updates with no dead android.
Click to expand...
Click to collapse
Hi,
what nabi version do you have? I have been able to unroot and get back to stock by using a UK v2 back up and a combination of nabi lab and twrp.
If you was looking for UK then I could probably point you in the right direction to get to the same point as me
Ste_J said:
Hi,
what nabi version do you have? I have been able to unroot and get back to stock by using a UK v2 back up and a combination of nabi lab and twrp.
If you was looking for UK then I could probably point you in the right direction to get to the same point as me
Click to expand...
Click to collapse
Hi Ste_j, thanks for the reply. I unrooted it already, or so I thought using nabilabs but it looks like twrp was removed and gapps remains - which I'm happy about seeing as I can't update it using ota update with google playstore- that could have been a disaster.
Here is my question I posted -
I Apologise for my ignorance in android in general.
I have rooted a Nabi 2 successfully installing Gapps etc using Nabilab, which was a pleasure to use. Now that the new OTA update is available which includes the Googleplaystore I would like to unroot and get the OTA updates. I thought I had unrooted it - using Nabilabs (twrp would not work, can't remember why but I think the touchscreen part wouldn't work for me). I returned to stock using (option 1. -1.9.37. Android can boot.) recovery using Nabilabs. I think I did a factory reset after that -sorry but it was weeks ago. Anyway, I suspected something wasn't right when I still had Gapps. I don't have TWRP on it now.
When I do the OTA update I get the dead android on reboot. Nabi is working fine apart from that. I read a lot of pages on this website but it ended up confusing me more than helping me unfortunately as I'm not android savvy.
I just need someone to tell me exactly what to do to properly unroot the Nabi so that it is truly back to original so I can use the OTA updates. I have no need to root the nabi again as the google play store is now officially available. And I've got a UK Nabi 2.
Ste_j,
I assumed I had a Uk nabi because I'm in Ireland. I don't know how to check this as it doesn't say uk here but the
model no is NABI2-NV7A-IE
Android version 4.0.4
Kernel version 3.1.10-00298-ge08b99f
[email protected] #2
SMP PREEMPT Tue Feb 26 17:21:35 HKT 2013
Build no IMM76L
Product version: 2.0-release-keys
I don't want to unroot any further unless I can get the latest ota update that gives me the google play store. I would rather leave it as it is now(gapps still on it) until you get yours working successfully I will gladly follow your lead from start to finish then. I just hope someone in the know replies with the solution. I too had been reading the nabi forum but cannot post there.
Tnx
Sounds like one of my recent 1am going on for 2 adventures in nabi land!
Hopefully there will be a UK stock 2.2 being uploaded tonight and if I get it working then I will let you know.
Ste_J said:
Sounds like one of my recent 1am going on for 2 adventures in nabi land!
Hopefully there will be a UK stock 2.2 being uploaded tonight and if I get it working then I will let you know.
Click to expand...
Click to collapse
Did you ever sort this one out mate? If I can atleast get my hands on the 2.2 OTA update zip file then atleast I can force it to upgrade from recovery mode.
metalheadkicks said:
Did you ever sort this one out mate? If I can atleast get my hands on the 2.2 OTA update zip file then atleast I can force it to upgrade from recovery mode.
Click to expand...
Click to collapse
Not yet. Waiting on 2.2 to be uploaded on the other thread. Hopefully the guy will get chance to upload over the weekend
So all 3 of you have UK Nabi's that can't get to 2.2 and are stuck somewhere at 2.0 or 2.1? Is that correct?
In theory restoring either of these(2.0 stock or 2.1 stock) http://forum.xda-developers.com/showpost.php?p=50158865&postcount=67
should then allow you to take the OTA. The US version did it as a 2 part update and the first wiped the system partition and installed a base ROM which got everyone on the same page and the did the second update to 2.3(2.2 for you guys if I understand correctly). Maybe the UK version doesn't do it like that.
Where is everyone failing at? TWRP usually fails for a "assert error in some file" If the backups are truly stock then this should work fine. Sometimes people who make backups mess up and TWRP set the file recovery-from-boot.p to recovery-from-boot.bak then the update can find that file and errors. Any other files will cause the same issue. Some other issues are the addon partition, the OTA's do edit stuff on the addon partition, if you have skipped around OTA's this can cause a mismatch too.
A stock 2.2 ROM would be great but anyone on 2.1 would still be stuck with ICS bootloader which won't boot 2.2UK. You would also want an addon partion backup to restore too.
Oops I get it.. You guys don't know where you are failing at because the stock recovery(dead android) doesn't give you any info. TWRP 2.6.3 can install OTA updates. Put TWRP backon. Use it to install the OTA it will have a log that will say why it's failing.
aicjofs said:
So all 3 of you have UK Nabi's that can't get to 2.2 and are stuck somewhere at 2.0 or 2.1? Is that correct?
In theory restoring either of these(2.0 stock or 2.1 stock) http://forum.xda-developers.com/showpost.php?p=50158865&postcount=67
should then allow you to take the OTA. The US version did it as a 2 part update and the first wiped the system partition and installed a base ROM which got everyone on the same page and the did the second update to 2.3(2.2 for you guys if I understand correctly). Maybe the UK version doesn't do it like that.
Where is everyone failing at? TWRP usually fails for a "assert error in some file" If the backups are truly stock then this should work fine. Sometimes people who make backups mess up and TWRP set the file recovery-from-boot.p to recovery-from-boot.bak then the update can find that file and errors. Any other files will cause the same issue. Some other issues are the addon partition, the OTA's do edit stuff on the addon partition, if you have skipped around OTA's this can cause a mismatch too.
A stock 2.2 ROM would be great but anyone on 2.1 would still be stuck with ICS bootloader which won't boot 2.2UK. You would also want an addon partion backup to restore too.
Oops I get it.. You guys don't know where you are failing at because the stock recovery(dead android) doesn't give you any info. TWRP 2.6.3 can install OTA updates. Put TWRP backon. Use it to install the OTA it will have a log that will say why it's failing.
Click to expand...
Click to collapse
Thank you. I have restored 2.0 from that post
Am I correct in thinking that the OTA will be stored in internal memory and that TWRP should be able to locate the file? Is there anyway of repairing the addon partition if that is corrupt?
Ste_J said:
Thank you. I have restored 2.0 from that post
Am I correct in thinking that the OTA will be stored in internal memory and that TWRP should be able to locate the file? Is there anyway of repairing the addon partition if that is corrupt?
Click to expand...
Click to collapse
Yes the ota is stored in internal memory. On data/media(internal). Its in a folder called ota or something intuitive like that. A forum search will find it, I'm drawing a blank. Do the ota download but when it says to update, back out of settings at that point and you will have the OTA zip.
Its kind of hard to repair addon. If there was a backup of addon from an early software version you could let the otas update it properly. I didn't really think to add that ability to twrp until late in the game though. The other option is to have someone that has successfully progressed through the otas make a backup and share. Then we could cook something up where you just use a 2.2 ROM and restore, update the bootloader and restore a 2.2 add-on. The last option is a custom OTA, similar to what I did with the US Nabi, and even that hasn't went perfectly. I'm not sure if its my update or people doing it a little different then the instructions but there have been a few failures with it. Although we figure it out eventually, just like we will with the UK Nabi.
aicjofs said:
Yes the ota is stored in internal memory. On data/media(internal). Its in a folder called ota or something intuitive like that. A forum search will find it, I'm drawing a blank. Do the ota download but when it says to update, back out of settings at that point and you will have the OTA zip.
Its kind of hard to repair addon. If there was a backup of addon from an early software version you could let the otas update it properly. I didn't really think to add that ability to twrp until late in the game though. The other option is to have someone that has successfully progressed through the otas make a backup and share. Then we could cook something up where you just use a 2.2 ROM and restore, update the bootloader and restore a 2.2 add-on. The last option is a custom OTA, similar to what I did with the US Nabi, and even that hasn't went perfectly. I'm not sure if its my update or people doing it a little different then the instructions but there have been a few failures with it. Although we figure it out eventually, just like we will with the UK Nabi.
Click to expand...
Click to collapse
TWRP installed and OTA attempted. log file attached . still not sure what is going wrong but hopefully somebody who is used to reading the logs will point me in the right direction
Ste_J said:
TWRP installed and OTA attempted. log file attached . still not sure what is going wrong but hopefully somebody who is used to reading the logs will point me in the right direction
Click to expand...
Click to collapse
Looks like it fails for fuhu_nabiMD_uk.apk. Never seen it fail a vendor app before. This was going from 2.0 to 2.1?
I see the 2.2 with addons got uploaded in the other thread. That's going to be the easiest route, except like I said previously I have this thinking that if you restore that(boot,addon,system) it's going to be stuck at Nabi symbol when you reboot because the bootloader wasnt updated to Jellybean. We will have to see I guess.
aicjofs said:
Looks like it fails for fuhu_nabiMD_uk.apk. Never seen it fail a vendor app before. This was going from 2.0 to 2.1?
I see the 2.2 with addons got uploaded in the other thread. That's going to be the easiest route, except like I said previously I have this thinking that if you restore that(boot,addon,system) it's going to be stuck at Nabi symbol when you reboot because the bootloader wasnt updated to Jellybean. We will have to see I guess.
Click to expand...
Click to collapse
That was going from 2.1 to 2.2
And yes i appear to be cross threading at the moment. Grabbed the 2.2 update and just spent the last hour trying to get past the stuck nabi screen. Got back to 2.1 eventually. Fastboot and Nabilab with just enough time to fire over previous TWRP and get back to the restore
Any ideas on how to update the boot loader?
Moving back to the other thread http://forum.xda-developers.com/showthread.php?t=2041224&page=9
aicjofs said:
Looks like it fails for fuhu_nabiMD_uk.apk. Never seen it fail a vendor app before. This was going from 2.0 to 2.1?
I see the 2.2 with addons got uploaded in the other thread. That's going to be the easiest route, except like I said previously I have this thinking that if you restore that(boot,addon,system) it's going to be stuck at Nabi symbol when you reboot because the bootloader wasnt updated to Jellybean. We will have to see I guess.
Click to expand...
Click to collapse
I get this issue also. I had rooted and added Google services - happy enough but no ability to move Apps to SD and I wanted to see if the Kernel update added this option. Anyway, I restored my backup - but the updates didn't apply cleanly. I swapped the boot loader back and things still weren't right and I didn't know then how to troubleshoot it. I was tired/had a wailing 3 year old wanting his tablet and I elected to wipe and reinstall from scratch using NabiLabFull. Initialised well enough through initial setup - completed setup and changed the recovery back to stock and it boot looped... Ugh. Reapplied stock image through twrp and changed to recovery back immediately - setup the Nabi from scratch and update 2.1 applied successfully. Update 2.2 fails however using stock everything with the error message:
Finding update package. . .
Opening update package. . .
Verifying update package. . .
Installing update. . .
Verifying current system. . ,
assert failed: apply_patch_check("/system/vendor/app/fuhu_nabiMD_uk.apk", "c4cd5edbc3f980c806a4fb8dd1d182f5c81b35f3", " eea145bf7f4a7b314ef15a3f3b0b9e8a9bc6efe7")
E:Error in /cache/nabi2-update.zip
(Status 7)
Installation aborted
So. The presence of two, what appear to be, md5 hash values makes me think the app in the system partition is not what it should be. Absent a file manager and root access I haven't delved deeper but I can only think the stock image I loaded isn't close enough to the UK stock image such that the UK specific apps correctly update in the 2.1 update (NabiMD is no longer installed after applying the 2.1 patch - dead link launcher icon on Parent home screen). My problem is I forgot to copy the pre-rooted backup before wiping - so I might have lost it. Anyway. Need to go shopping now and I'll dig more later. Long story short - I'm not sure a stock root path via NabiLab is viable for UK Nabi 2s.
Uk nabi update - leaving nabi as is until it's solved
I'm sorry this is not helpful but I just wanted to say that until the uk nabi is restored successfully and can update normally using ota, I'm leaving mine as it is. Basically, it works fine and my 4 yr old gets endless fun out of it. In saying that, I will restore it to normal someday when it can be done. I await one of you smart nabi gurus to come up with the answer.
MattP79 said:
I get this issue also. I had rooted and added Google services - happy enough but no ability to move Apps to SD and I wanted to see if the Kernel update added this option. Anyway, I restored my backup - but the updates didn't apply cleanly. I swapped the boot loader back and things still weren't right and I didn't know then how to troubleshoot it. I was tired/had a wailing 3 year old wanting his tablet and I elected to wipe and reinstall from scratch using NabiLabFull. Initialised well enough through initial setup - completed setup and changed the recovery back to stock and it boot looped... Ugh. Reapplied stock image through twrp and changed to recovery back immediately - setup the Nabi from scratch and update 2.1 applied successfully. Update 2.2 fails however using stock everything with the error message:
Finding update package. . .
Opening update package. . .
Verifying update package. . .
Installing update. . .
Verifying current system. . ,
assert failed: apply_patch_check("/system/vendor/app/fuhu_nabiMD_uk.apk", "c4cd5edbc3f980c806a4fb8dd1d182f5c81b35f3", " eea145bf7f4a7b314ef15a3f3b0b9e8a9bc6efe7")
E:Error in /cache/nabi2-update.zip
(Status 7)
Installation aborted
So. The presence of two, what appear to be, md5 hash values makes me think the app in the system partition is not what it should be. Absent a file manager and root access I haven't delved deeper but I can only think the stock image I loaded isn't close enough to the UK stock image such that the UK specific apps correctly update in the 2.1 update (NabiMD is no longer installed after applying the 2.1 patch - dead link launcher icon on Parent home screen). My problem is I forgot to copy the pre-rooted backup before wiping - so I might have lost it. Anyway. Need to go shopping now and I'll dig more later. Long story short - I'm not sure a stock root path via NabiLab is viable for UK Nabi 2s.
Click to expand...
Click to collapse
Floralina123 said:
I'm sorry this is not helpful but I just wanted to say that until the uk nabi is restored successfully and can update normally using ota, I'm leaving mine as it is. Basically, it works fine and my 4 yr old gets endless fun out of it. In saying that, I will restore it to normal someday when it can be done. I await one of you smart nabi gurus to come up with the answer.
Click to expand...
Click to collapse
Have you tried this? http://forum.xda-developers.com/showpost.php?p=50431606&postcount=98
It has to be done manually but should get a UK Nabi to complete stock version 2.2.
In case you need to know for some reason in the future that is a SHA1 hash not md5.
So I rooted my EVO 4G LTE, hurray! I have a number of questions and after some tedious searching I could not find any clear and consise answers. There is just too much info out there, even the rooting was not so easy!
So I have three main issues; 1) Bloatware 2) A stuck OTA update 3) System error messages after each reboot.
Bloatware
Using ESFileExplorer and even TitaniumBackup(free) I attempted to uninstall a number of the apps that came pre-installed and that hog RAM. Each time I reboot they come back, some attempts to uninstall apps have sent the phone straight into reboot and all the apps came right back.
I am not looking to get rid of sense, this phone is a lifeline to my livelihood and its dependability is paramount, so I would like to remain as stock as possible. I just want to free it up so that it runs a bit better and less laggy.
My task manager app shows that 0.89/1.0GB is is use and that is ridicules!
OTA Update
Sometime after rooting (this was a brand new replacement device when I started) the 3.17.651.5 update got downloaded and is now showing up all the time asking to do the actual installation. Is there any way to delete the update files and prevent the message from popping up all the time?
Reboot Error
This is just really a minor nuisance, but while we are at it I figure why not ask. After each reboot since rooting I get a System Error Message saying something like 'the phone experienced an abnormal reboot'. Any way to prevent it from doing that?
Misc
Also, I cannot seem to find any instructions (that are relevant to today, all are from 2012 and early 2013) for allowing the EVO to act as a WiFi hotspot. Any tips?
Thank you all for this great resource and in advance for all your help!
You need to S-OFF. Your system is write protected, which is why when you reboot, the apps return. I'd honestly also recommend updating to the data/media partition layout and then achieving S-OFF with Rumrunner. Once you're S-OFF, everything will work fine, and as a bonus you'll have Sense 5 .
Captain_Throwback said:
You need to S-OFF. Your system is write protected, which is why when you reboot, the apps return. I'd honestly also recommend updating to the data/media partition layout and then achieving S-OFF with Rumrunner. Once you're S-OFF, everything will work fine, and as a bonus you'll have Sense 5 .
Click to expand...
Click to collapse
I just figured the S-OFF out thanks to exhaustive Google searches, now I am seeing your post about partitions and I am not sure what you are talking about.
How do I update partitions? Do I have to do that before I use the rumrunner exploit to gain S-OFF?
webby88 said:
I just figured the S-OFF out thanks to exhaustive Google searches, now I am seeing your post about partitions and I am not sure what you are talking about.
How do I update partitions? Do I have to do that before I use the rumrunner exploit to gain S-OFF?
Click to expand...
Click to collapse
All you have to do is run the 4.13.651.4 RUU. @Magnum_Enforcer has a guide that I believe will assist you.
Captain_Throwback said:
All you have to do is run the 4.13.651.4 RUU. @Magnum_Enforcer has a guide that I believe will assist you.
Click to expand...
Click to collapse
This Post?
This will simply give me JellyBean and Sense 5? Also, will I loose root? Weren't there major problems with this update?
That's the guide he's referring to, yes. Just scroll down to the section on RUU's for more info. Link to the aforementioned RUU is at the bottom of the first post. You will lose root but you can use HTC Dev to unlock and root again, and no, there were not major problems with this update.
Magnum_Enforcer said:
That's the guide he's referring to, yes. Just scroll down to the section on RUU's for more info. Link to the aforementioned RUU is at the bottom of the first post. You will lose root but you can use HTC Dev to unlock and root again, and no, there were not major problems with this update.
Click to expand...
Click to collapse
Aha, but why did HTC pull it then?
Also, will this resolve my stuck 'update pending' issue? And will I loose data? Will my installed TWRP recovery be an issue?
webby88 said:
Aha, but why did HTC pull it then?
Also, will this resolve my stuck 'update pending' issue? And will I loose data? Will my installed TWRP recovery be an issue?
Click to expand...
Click to collapse
It was never pulled, per se, but it was never released to the masses, either. The issue was how Android 4.3 was implemented on this device-that it required a RUU instead of a traditional OTA update, which is somewhat unusual but that's how the update had to be handled due to the internal storage getting re-partitioned. Anything you have on your internal storage you'll need to back up to your computer because it will be lost when the RUU runs. Also, TWRP won't be an issue. Just reinstall the modified version from @Captain_Throwback once you've updated with the RUU (you can click on the TWRP version number in his sig & it will take you to the appropriate link).
Note that there were issues with the initial Android 4.3 updates but they were resolved with the .4 RUU, which is why I don't have links to any of the previous RUU's. The issue was with the roaming option, mostly.
Magnum_Enforcer said:
It was never pulled, per se, but it was never released to the masses, either. The issue was how Android 4.3 was implemented on this device-that it required a RUU instead of a traditional OTA update, which is somewhat unusual but that's how the update had to be handled due to the internal storage getting re-partitioned. Anything you have on your internal storage you'll need to back up to your computer because it will be lost when the RUU runs. Also, TWRP won't be an issue. Just reinstall the modified version from @Captain_Throwback once you've updated with the RUU (you can click on the TWRP version number in his sig & it will take you to the appropriate link).
Note that there were issues with the initial Android 4.3 updates but they were resolved with the .4 RUU, which is why I don't have links to any of the previous RUU's. The issue was with the roaming option, mostly.
Click to expand...
Click to collapse
Ok, I get it. Thanks for taking the time to explain this!
One more question though, I see in your post a link to 4.13.651.4, but I see another thread from @Captain_Throwback here which mentions a Odex or Deodex - what is that? And all those useful mods (battery percentage, camera shutter sound, power menu, 30 step volume etc etc), which should I use?
webby88 said:
Ok, I get it. Thanks for taking the time to explain this!
One more question though, I see in your post a link to 4.13.651.4, but I see another thread from @Captain_Throwback here which mentions a Odex or Deodex - what is that? And all those useful mods (battery percentage, camera shutter sound, power menu, 30 step volume etc etc), which should I use?
Click to expand...
Click to collapse
He has rooted odex & deodexed ROM's based off the RUU. If you want to install any mods you'll need to run the deodexed version.
I'd like to start off by saying that I have NEVER rooted this device and have been 100% stock since day 1.
The only thing I did was enable developer options to unlock the bootloader so I could sideload OTA updates in the event they take too long to hit my device... No custom recoveries, no custom roms, no custom kernels, no exposed framework... NOTHING.. pure stock.
I started getting the 5.0.2 upgrade notification yesterday. Everytime I download and install, about 30% of the way through the installation I get the android icon showing ERROR. When I open the last recovery log it mentions not being able to open /cache/update.zip with a status 7 error. .. All I can do it reboot and return back to 5.0.1
I did some reading and it was recommended to wipe / format the CACHE partition. So I went into the stock recovery and tried this but to no avail.
I REALLY don't want to factory reset (or flash a factor image) and lose all the progress on the various games I have been playing.
Is there anything else I can try ??
you can try sideloading the update, grabbing the factory image and manually flashing the partitions (except userdata). you can try the factory image and just edit the flash-all.bat file to not wipe the device (sometimes the flash all file gave me an issue forcing me to do the partitions manually)
Thanks for the feedback... I can try this but IMO it's more of a workaround than a solution.
What I'm trying to get at is..... How in the heck would Google or HTC expect the average consumer to resolve such an issue.
Needing to have a PC, have special drivers installed, etc.., is understandable for those who want to step away from STOCK but what about the average consumer who just purchased the tablet to use as is, continues to receive a notification that an update is available, but fails every time it is applied ? Surely there is something that can be done so allow the update to take without having to factory reset or RMA the device...
y2whisper said:
you can try sideloading the update, grabbing the factory image and manually flashing the partitions (except userdata). you can try the factory image and just edit the flash-all.bat file to not wipe the device (sometimes the flash all file gave me an issue forcing me to do the partitions manually)
Click to expand...
Click to collapse
From the sounds of it there is an issue with the OTA file. But I agree you shouldn't be having to do this. I worry about the non xda'ers of the world when this stuff happens
Mine is doing the same crap. Also unmodified Nexus 9. This is nonsense.
Same issue here. Error every time I hit Restart & Install after downloading the update. Have to long press the power bottom to get it to boot back again. Tried a factory reset, didn't work. Still getting same error.
Thanks for sharing that you tried a factory reset. I am trying to avoid this for reasons mentioned in my 1st post.
I have tried numerous times now wiping cache and waiting for the upgrade to reappear but it continues to error out that the same place during the upgrade each time. Fortunately it's not bricking the device but IF this update is required as a stepping stone for subsequent updates then it will be extremely disappointing if Google doesn't address this issue.
I still cannot imagine google / htc not being able to resolve this WITHOUT having to make a user connect to a PC and manually flash imagess (or worse.. RMA the device). Hoping someone on XDA comes up with a magical sequence to allow the OTA to prcess properly.
In addition to wiping cache through recovery I have also ensured that I didn't have any apps / process or services disabled.
This is also being reported in google support forums:
https://productforums.google.com/fo...ter#!category-topic/nexus/nexus-9/MzHmJu4glkQ
I still haven't tried sideloading the OTA but at this point I don't think it would make a difference as the OTA does download properly and says it was verified.
kurtis.austin2 said:
Same issue here. Error every time I hit Restart & Install after downloading the update. Have to long press the power bottom to get it to boot back again. Tried a factory reset, didn't work. Still getting same error.
Click to expand...
Click to collapse
the.teejster said:
Thanks for sharing that you tried a factory reset. I am trying to avoid this for reasons mentioned in my 1st post.
I have tried numerous times now wiping cache and waiting for the upgrade to reappear but it continues to error out that the same place during the upgrade each time. Fortunately it's not bricking the device but IF this update is required as a stepping stone for subsequent updates then it will be extremely disappointing if Google doesn't address this issue.
I still cannot imagine google / htc not being able to resolve this WITHOUT having to make a user connect to a PC and manually flash imagess (or worse.. RMA the device). Hoping someone on XDA comes up with a magical sequence to allow the OTA to prcess properly.
In addition to wiping cache through recovery I have also ensured that I didn't have any apps / process or services disabled.
This is also being reported in google support forums:
https://productforums.google.com/fo...ter#!category-topic/nexus/nexus-9/MzHmJu4glkQ
I still haven't tried sideloading the OTA but at this point I don't think it would make a difference as the OTA does download properly and says it was verified.
Click to expand...
Click to collapse
I found this -> http://www.telekom-presse.at/apps/n...sht_update_auf_version_5-1_fehlt.id.33675.htm. There is a comment claiming to have fixed the issue by sideloading the OTA. I have yet to try it myself though.
On a side note,
Google has apparently finally released 5.1.1 for our device so it should be making it's way out soon.. HOPEFULLY we can go straight from 5.0.1 to 5.1.1 without having to worry about 5.0.2.
adstro said:
I found this -> http://www.telekom-presse.at/apps/n...sht_update_auf_version_5-1_fehlt.id.33675.htm. There is a comment claiming to have fixed the issue by sideloading the OTA. I have yet to try it myself though.
Click to expand...
Click to collapse
the.teejster said:
On a side note,
Google has apparently finally released 5.1.1 for our device so it should be making it's way out soon.. HOPEFULLY we can go straight from 5.0.1 to 5.1.1 without having to worry about 5.0.2.
Click to expand...
Click to collapse
Have you seen any evidence of this unicorn? Just curious...
Reported on the official Google+ page :
https://plus.google.com/+Nexus/posts/2hB9k5r2Z7T
But I can't find any reports of anyone actually receiving it yet. IF 5.0.2 needs to act as a stepping stone then maybe they delayed to get the 5.0.2 issue resolved 1st.. It seems to be getting more and more attention out there now.
cam30era said:
Have you seen any evidence of this unicorn? Just curious...
Click to expand...
Click to collapse
FWIW.
I went into recovery, wiped cache and tried to side load the 5.0.2 OTA update manually and got the same error. The error displayed approx. 40% into the upload process from the PC.
I'm getting frustrated I can't get 5.0.2 to install. This is ridiculous
When I get the error, Power/Vol+ switches to the recovery log - there is a warning about (from memory) a partition having been mounted R/W, and a suggestion to re-flash the device first.
All I can remember changing from stock is permitting bootloader-unlock from dev options (never got round to unlocking, so far as I remember).
Not too worried, will hang on for the next major update (or 6.x if there is a preview, maybe) - however, it seems 5.0.2 is a fix to allow 5.1.1 to download (from comments on the G+ thread)
My error is an SHA mismatch on /dev/block/platform/sdhci-tegra.3/by-name/APP. I have
47e96f7e7daa360947b456eca9dc5a8e45573b30
@the.teejster, @kurtis.austin2, @tshoulihane
Given that 5.0.2 is a significant improvement. Why don't you give up on trying to sideload the OTA, and fastboot flash the factory image? You won't get these errors.
cam30era said:
@the.teejster, @kurtis.austin2, @tshoulihane
Given that 5.0.2 is a significant improvement. Why don't you give up on trying to sideload the OTA, and fastboot flash the factory image? You won't get these errors.
Click to expand...
Click to collapse
How do I do this? Need adb from a computer?
kurtis.austin2 said:
How do I do this? Need adb from a computer?
Click to expand...
Click to collapse
Yes you need ADB and Fastboot. Follow this guide and don't hesitate to ask questions > http://forum.xda-developers.com/nexus-9/general/guide-how-to-unlock-bootloader-flash-t3035153
cam30era said:
Yes you need ADB and Fastboot. Follow this guide and don't hesitate to ask questions > http://forum.xda-developers.com/nexus-9/general/guide-how-to-unlock-bootloader-flash-t3035153
Click to expand...
Click to collapse
Thank you ? very kind of you
kurtis.austin2 said:
Thank you ? very kind of you
Click to expand...
Click to collapse
Welcome
Please read the OP.
cam30era said:
@the.teejster, @kurtis.austin2, @tshoulihane
Given that 5.0.2 is a significant improvement. Why don't you give up on trying to sideload the OTA, and fastboot flash the factory image? You won't get these errors.
Click to expand...
Click to collapse
Solved
Nikolay82 said:
Hello. I am fairly new to the XDA forums and I would like to say hello to everyone.
I am looking for someone to help me with the following problem.
I flashed CID to take in any RUU. I've tried many even the USA T-mobile. It worked but had problems using mobile data. Now I use stock european one where version is:1.32.401.17
RUU_HIMA_UHL_L50_SENSE70_HTC_Europe_1.32.401.17_Radio_01.01_U11440261_56.02.50306G_2_F_release_429340_signed_.exe
. I got this version through official RUU. Device is currently S-OFF rooted and has twrp on it.
But now problems are here. I am aware european models got the 5.1 OTA update and I do have it downloaded.
File Says:
OTA_HIMA_UHL_L51_SENSE70_MR_HTC_Europe_2.10.401.1-1.40.401.8_release_444119.zip
Now when I try to update OTA through twrp it doesnt let me. Says something about Err_message. That being said, sideload wont work either. Now my question is, how do I get the OTA to my device? Note; when checking for updates via settings in the phone it says no updates available, regardless of updated airing for a while now. Now i wonder if can update from :1.32.401.17 to 2.10.401.1 with OTA or do I need to update first to 1.40.401.8 (I have 1.40.401.8 flash file).
Please if someone can help me I would thankful. Thanks.
Click to expand...
Click to collapse
OTAs can only be used with the stock recovery. I don't recommend doing a stock OTA if you have modded parts of the system. Better to flash a rom through TWRP. You might need to update the firmware as well.
Are you referring to 0PJAMIG*.zip file? in that case i have them plenty and one I need that matches my phone is like missing some files in the zip. Sadly, I can't post the link yet.
Let me explain this better please:
1. I do have RUUs,; RUU_HIMA_UHL_L50_SENSE70_HTC_Europe_1.32.401.17_Radio_01.01_U11440261_56.02.50306G_2_F_release_429340_signed_2_4
2. I do have 0PJAIMG Files as well: 0PJAIMG_HIMA_UHL_L50_SENSE70_HTC_Europe_1.32.401.8_Radio_01.01_U11440261_56.02.50306G_2_F_release_425571_signed_Hboot.zip
3. And I believe I have proper firmware and recoveries for said 0PJAIMG. I have every one of them downloaded for gradual update.
Problem is; I don't have the automatic RUU for version 1.32.401.8, the exe stuff. And I am having hard time installing the 0PJAIMG file on the phone because it gives errors and missing files inside from the looks.
File size of 0PJAIMG is 2gb but content withing the zip is barely 40mb but it says 2gb...
If I am able to get everything related with 1.32.401.8 I could most likely do the all process till latest update.
I am aware I can't post links but for this sake I would like to post it like this: tinyurl[dot]com/m9roms
Just replace "[dot]" with "."
moderator can remove the link however but I need urgent help. If someone can guide me what to I would appreciate it.
Old phone but some of the system files have become corrupted. Long story short I want to keep it as it is but use lgup to restore the system files. If anyone has the kdz VS98713A it would be greatly appreciated.
On a side note if finding that kdz fails would it be possible to use an older kdz (say VS98711A) then do an update through verizon to 13a? I'm not sure if it would just detect the older version and go straight to oreo which is what I would want to avoid along with avoiding a factory reset lol.
Wasnt sure if this should go in this forum or the rom's and kernals forum. If so it can be moved tho I'm not even sure anyone uses this phone any longer.
Thanks ;=)
no one has an answer before I attempt it? ;=P
Search this for the kdz VS98713A_06_0626_ARB00.kdz
I believe this is not the latest rom, but if you flash a older rom you should always be able to update it.
You could also try to do a factory reset to see if that fixes your issues.
thanks a million. Yes its an older rom, I just wanted to keep it in the original condition. Hopefully all the data stays the same (hence why I'm trying to avoid a factory reset)