Code:
* ~ DO READ THIS BEFORE ATTEMPTING~
* Iam not here to guarantee any successful TWEAKING/MODDING. nor i am responsible
for bricked devices, dead SD cards,broken eardrums,hearing loss or a broken device. YOU are
choosing to make these modifications, and if you point the finger
at me for messing up your device, I will laugh at you. But I will try
my best to explain all the necessities, so you won't mess up your Device.
*
~END
DO EFS back up just in case your imagination went too far
GUIDE HERE
AFTER tweaking your phone's performance, assuming your contented on its optimum arsenal and battery saving mode, then you go for sounds, everybody wants a crispy loud device at the same time not sounding cheap
I did not make these mods- I am juz sharing them to those who really needs it-for them to save their precious time wandering all over the site
I tried these mods mentioned below on my quatro. All of them works..
===============================================================================================================================================================================================
[MOD][GB/ICS/JB]●►ACID Audio Engine V7.0◄●[Build2805][V9 Soon]|☆☆☆TEAM AC!D☆☆☆
Changelog:
Version 7 ics+
● Rebuild once-again after my old beats audio version 5
● Optimize for every devices
● Should work on all AOSP roms
● Stable
● New library files
● Latest Beats Audio files
● Removed ALSA
● SRS with Surround sound
● WOWHD BASS enabled
● SRS_WOWHD values tweaked (clean reverberation)
● SRS CHSP EQ and Compression tweaked
● New Clearaudio Engine JB from sources
● Clearphase is now effective
● New Downmix lib with tweek 4 crispier sound
● New snd pcm cards for better audio rendering
● New resampling libs and tweaks (48khz)
● Deep and Clear
● Cristal Voice ( JB clearaudio +)
● Louder volume
● Awesome Sound, Powerfull and Deep Bass, Clear Audio, Cristal Voice, Clean Sound without distortion
● Awesome beats
● NEW ACID AUDIO FILE TO CHECK WHETHER THE IMPORTANT TWEEKS ARE LOADED CORRECTLY
● Removed unwanted files
● Optimized configuration files
● More Equalizer Presets
● etc etc............................................... ......
Version 7.0 [GB]
- Added support for Gingerbread (I got many PM regarding this)
- More to come in final release
-noozxoidelabs.noozy player full port(NO FC AND NO BUGS, 100% working)
-Deep bass
-clearaudio
-New sound misc tweaks
-New soundfiles
-Audio tweaks
-Volume fix
-Fully compatible lib files
-X-EQ PROCESSOR
-LOGICSOURROUND ES
-PHYCHOACOUSTIC 2
-OWN EQUALIZER
-DEEP BASS EFFECT
-NO NEED OF EQUALIZER APPS
A Sound mod to bring you overall better sound quality, more precisely
1.do backup
2. Wipe Cache then Dalvik Cache
3.Flash the downloaded file in CWM (First 2802 then Clear Audio)
4.Wipe Cache then dalvik cache
5.reboot your phone
6. Reboot
--If it didnt stick then
Check buildprop and use terminal emulator to fix it (su[enter] mount -o rw,remount /system[enter] aengine)
That's all
MOD
Version 7 for ICS/JB[Stock/AOSP][2802/2805]
DOWNLOAD HERE
Others[Apps tweeks etc]
Clear audio +& Audio FX Widget(Flash it in recovery) DOWNLOAD HERE
Audiofx widget HERE
noozxoidelabs.noozy.84.011 HERE
com.noozxoidelabs.eizo.rewirepro HERE
ORIGINAL THREAD:http://forum.xda-developers.com/showthread.php?t=1923630
CREDITS: Knight47
**Please custom it according to your taste. This let alone is already thumb thumpin
but were not done yet
Download Viper4android ver.2.3.1.5
Download HERE
CREDITS: Zhuhang
have not tried yet on 2.3.2.0 and 2.3.2.2
set to super audio quality/High audio/Battery saving then reboot
If you were able to follow me from the start then be sure you get this right
Viper Settings:
lock effect speaker
set it to [compatible mode] not in normal mode
==============
FX:
<PHONESPEAKER>
1. Master Power: ✔
2. Force Enable V4A: /
3. FIR Equalizer: ✔
(ii) Select Preset: Acoustic
4. Convolver: ✔
(ii) Impulse Response: Studer 1dB w/ noiseReduction updated.irs HERE credits to BSDGeek
5. Cross CHan : 20%
6.Reverberation: /
7. room size: 36m2
8. sound field: 6m
9. Speaker Optimization: /
10: extra loud: /
-im using speaker since my kid nephew still using my headphones
add these:
install like normal apk
Download: tweaked com.motioncoding.beats HERE
(much preferred player)
PORTED S3 stock music player DOWNLOAD HERE
Google player - go to market
AC!D Walkman Player, Clearaudio, Xloud, Clearbass: HERE
ok now set music effects to viper4android..
reboot..
You should have these apps left
-Acid soundmod
-Audio Fx Settings
-Beats.audio.INSTALLER
-clearAUDIO +
-Viper4AndroidFx
-Apollo
-Google music player
-Walkman
{those that are not stated pls delete them coz they will do force close and interrupt some frequencies}
volume set 2clicks starting from zero....
Enjoy..
No need to say it. If this post helped you in anyway, just hit THANKS Button.
-reserved
What is the difference between nornal mode and compatible mode in viper? Can u please explain? Because I am using normal mode..
Sent from my GT-I8552 using Tapatalk
coolkoushik07 said:
What is the difference between nornal mode and compatible mode in viper? Can u please explain? Because I am using normal mode..
Sent from my GT-I8552 using Tapatalk
Click to expand...
Click to collapse
-in normal mode you use viper as your main audio and all of its components, while in compatible mode you retain your phones sound settings and juz using viper as an equalizer.
can this damage the speaker?
And... You tryed it?
zanini007 said:
can this damage the speaker?
And... You tryed it?
Click to expand...
Click to collapse
DAMAGE in what case? pls be specific.. was using it 8/10 volume for almost an hour to drain battery and all went well..
-In this set up, you could actually enhance your home speaker boosting sound using your phone as an EQUALIZER.
-make sure your phone your on interaactive or performance/ noop when doing sound set up...volume quality takes alot on our phones
yes i tried it.
Greetings guys!
Today I'm gonna share my VIPER4ANDROID settings for you guys.You can share yours too here in this thread.First of all,you can download the latest version of viper4android,irs,how to install etc on original thread here http://forum.xda-developers.com/showthread.php?t=2191223.All credits go to @zhuhang and all his friends for making such a beautiful app for boosting our music experience.I'm only share settings for our specific devices.
RULES FOR SHARE YOUR SETTINGS
1.Make sure to state your name/type/model of [email protected] etc.
2.ROM that your running.
3.Music player that you use.
4.What settings you share for whether it's for speaker,earphones etc.
5.An appropriate screenshots/post/ etc of your settings for easy and quick refer by other members.
ENJOY!
These are my settings [earphone & headphone](screenshots below)
1.Stock earphones and music player.
2.Running Megafire V8X rom on my GT-I9205.
3.I will upload settings for speaker later.( No for Bluetooth and usb cause I don't use it).You can share if you want.
Hey dear, please tell me the best setting of hi-resolution music... In viper4android.. I m using Nexus5. I have sony earphones xb70ap. Please suggest me for listening hi-resolution seeting in viper4android... Thanks
Resurrection Remix 4.4.2 N7100 Jetaudio and V-Moda Remix Audio earbuds. Can't find a good setting without the bass going crazy. Thanks
Master Power
V4A-FX is powered on
Convolver
Enable
Impulse Response
Dolby Pro Logic II.IRS
Headphone Surround +
Enable
Level 1
Reverberation
Enable
Room Size
25m2
Sound Field
5m
Damping Factor
0 Percent
Wet Signal
0 Percent
Dry Signal
50 Percent
Fidelity Control
Enable ViPER Bass
Select Bass Frequency
60 Hz
Select Bass Boost
6.0 dB
Enable ViPER Clarity
Select Clarity
3.5 dB
Auditory System Protection
Enable
Select Binaural Level
Moderate
There had some time to refine the settings !
cm 13 remix rom mega 5.8 can i use this app sir..??
I have a Note 3 but I'll share anyway
This is for music only, I shut off V4A for movies, dialogue etc. I'm not sure if the Mega has a processor with NEON or not.
Phone: SM-N900A
Headphones: Shure SE215
Music Player: Poweramp 7.03 alpha (note: must sign up for beta program in Play store)
Playback Gain: OFF
FET Compressor: OFF
DDC: OFF (no, I don't use the SE215 entry; it's terrible)
Spectrum Extension: 1.0
Equalizer: OFF
Convolver: BBE Generic Preset 4
Crossover: 10%
Dynamic System: Common Headphones v2
Dynamic Bass: 24%
ViPER Bass: 78 hz; 8.0 dB
ViPER Clarity: XHiFi; 11.0 dB
CureTech+: OFF
AnalogX: OFF
Master Gain: -10.5 dB
Limit Threshhold: 0 dB
These settings probably won't be any good on low quality earbuds. They need all the extra signal processing crap, but too much of that stuff is a hindrance on high quality IEMs.
If anybody here is interested, I have about 750 .irs files I can post a link for y'all to check them out.
Currently using V4A MK-Mod 2.4.0.1(no TWRP)
Equalizer= Vocal Booster
Convolver= Beats Pro+Beats 40%
VHS+= 2
Dynamic System= High End v2 10%
Viper Bass= Natural 78hz at 8db
Viper Clarity= Ozone+ at 8db
Master Gate= 1.6db and 5:5 and 1.0 limit threshold
Currently using some JVC in ear headphones(don't know the model # atm I picked them up for $20 at Walmart not too long ago.
Oh and I'm using PowerAmp 703 alpha through the beta testing part of the play store.
And I'm using a Razr MAXX HD XT926 w/locked bootloader and 4.4.2 Stock Rom 182.46.15
Earphones
Try soundpeats Q12 wireless earphone to enjoy high quality sound.
Hello
iam Just sharing The Work Of Zhuhang
and I Confirm Its working on our device
from the Original thread
FX Key Features
★ ViPER-DDC ★
Description N/A.
★ Spectrum Extension ★
Description N/A.
★ x86 Platform Support ★
Viper4Android supports x86 (Atom/Core i3/i5/i7) platforms.
★ True Octa-Core Support ★
ViPER4Android supports true octa-core as well as single, dual and quad core devices.
★ USB/Dock effect Support ★
ViPER4Android supports USB/Dock audio output.
★ Android 4.4 Support ★
ViPER4Android supports Android 2.3 Ginger bread, 4.0 Ice Cream Sandwich, 4.1 ~ 4.3 Jelly bean and 4.4 KitKat firmwares.
★ Speaker Optimization ★
First effect for speakers. Try it yourself.
★ Channel Pan ★
Controls left/right channel output. Its not very useful unless your headphone is imbalance or faulty one side. It will be a cure for you.
★ Differential Surround / Haas Effect ★
This is an old feature which ViPER520 had removed from FX in early days.
But after many users requesting it, ViPER520 bring it back to FX
More info on Haas Effect: http://www.mixcoach.com/creating-depth-the-haas-effect-2/
★ ViPER Fidelity Control ★
★ ViPER Bass ★
With different bass modes, you can have greater bass experience than before!
★ ViPER Clarity ★
With the latest Clarity mode selection, you can balance up heavy bass with high clarity audio that you can never imagine before!
★ Headphone Surround+ (VHS+) ★
With this VHS+, V4A made its way to achieve great surround technologies for Android.
★ Auditory System Protection (Cure Tech+) ★
With normal audio system, listening for more than three hours will feel fatigue, dizzy, tinnitus, irritated and other symptoms.
This is a normal reaction, heavy bass and high volume could cause permanent damage to the human auditory system, but other phenomena can restore through resting.
Viper as a listening experience professional will not ignore this problem. Therefore put a lot of effort to study how to make a "Healing" sound technology, just a small success. But thinking on how to let users experience it.
★ Convolver ★
When an Impulse Response Sample(IRS) is loaded, V4A will process the sound to show the same characteristics of the loaded sample. Through Convolution, samples with effects such as equalizer, surround, reverberation, tube etc can be loaded.
Click to expand...
Click to collapse
How To Install: Just Install apk and give su premision Then press install/update driver
Original Thread-Here
Nice works well
Hello!
Unleash the audio quality of your Redmi Note 3!
This is a sound mod especially designed for the Redmi Note 3 Pro (kenzo /kate) and its Qualcomm Snapdragon 650 chipset.
It also offers option for enhancing audio via speaker,
It is a hardware level modification that enables the disabled CLS_H_HIFI DAC mode of our chipset that enhances the sound.
The aim of this mod is to offer the ability to take full advantage of the IIR filter implementation offered by Qualcomm audio codecs (WCD93xx). The IIR filters are implemented in hardware as a cascade of five biquads that can be designed independently.
FEATURES :
It enhances the soundstage and just ensures a clean audio to be put-out by the hardware. It increases the dynamic range of bass and treble the device can handle.
It enables HiFi or high performance audio on your smartphone without any hissing sound.
The filters are implemented in hardware and independent of the ROM, kernel, and media playback software used.
It is fully compatible with other audio mods like Ainur audio, ARISE sound, ExtremeBeats, and also Viper, James DSP
The additional impact on battery usage is virtually non-existent
Options for enhancing speaker audio:
HTC 10, which uses the earpiece as a secondary speaker
Stereo, which uses the earpiece as the second speaker to provide true stereo sound from speakers.
INSTALLATION :
1. Download the latest release of shox audio from the drive link attached to the second post.
2. Flash zip in TWRP recovery.
3. Follow the onscreen instructions and select the appropriate options.
4. Feel the shox effect!
Note : You have to reflash the mod after every ROM or kernel update
DOWNLOADS:
Download the latest version of shox audio below:
https://drive.google.com/folderview?id=0B5ratNhH-7mGU3AtTVFmekE4VG8
PS:Tested and working on a kenzo/kate smartphone on all roms.
This mod just enhances the soundstage and just ensures a clean audio to be put-out by the hardware. It increases the dynamic range of bass and treble the device can handle.(heavy equalizer and viper4android users definitely know what I'm talking about)
Link to official viper4android website:
https://vipersaudio.com/blog/
The zip file you download is not a recovery flashable one. It contains the Viper4Android apk. So extract the zip and install the apk.. Please dont complain about it.
Recommended tips:
1)I recommend AGNi kernel by @psndna88, Darkness kernel by @MOVZX or Guyver kernel by @MEGAX91 because it has slimbus overclock which enhances audio quality and my mod on his kernel gives the best audio experience. I have also included patched kernels of other devs also if you need them too..
2)Flash Ainur Sauron audio mod made by @UltraM8 along with this mod for a much better experience.This is currently the best audio mod which is the cleanest..Please thank him for his great work...
Link here: https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
3)Users who need more tweaking to the audio can use Viper4Android.
4)I have included some of the best IRS samples for viper4android(according to me). So try it out if you are using viper4android for complete control over your music. Extract the zip and place the contents in viper4android/kernel directory of your internal storage.(the zip provided is not recovery flashable).
5)People who use MX player for videos can enable SW audio boost which will further increase the sound levels through speakers without any distortions..
It is recommended not to listen through speakers at full volume for longer periods.. Keep the volume low by 1 or 2 steps from the max.
6)People who think that the present max volume through headphones isn't enough can install viper4android and increase output gain to 6dB in master gate..
My personal Viper4Android settings:
Master power - on
Playback gain control - off
FET compressor - off
Viper DDC - on, set to sennheiser hd558
Spectrum extension - on, set to 1.0
Firequalizer - off
Convolver - off
Differential surround, field surround, headphone surround+, reverberation - all set to off
Dynamic system - off
Viper bass - off
Viper clarity - off
Tube sound simulator - off
AnalogX - on, set to extreme
Some other info:
My earphones :
1) Sennheiser cx180 street-II - daily outdoor use.
2) Skullcandy Ink'D - used rarely.
3) Sony MDR-ED12LP - used when I'm at home.
List of smartphones I own right now:
1) Xiaomi Redmi Note 3(kenzo)
2) Samsung Galaxy S(i9000)
3) Xiaomi Redmi Note 4(Mido)
4) Samsung Galaxy Note(n7000)
CHANGELOGS:-
V1 - initial release.
V1.1 - tweaked the values a bit to further remove the hissing noise as reported by @MurdererFight.(thanks bro for being the first tester and reporting me)
V1.2 - added some tweaks which will truly enable HiFi audio through DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or the headphone connected.this ensures proper voltage levels through the amp for the earphones/headphones.
V1.3 - Merged surround audio mod along with hifi audio..
Enjoy stereo-like sound on your kenzo (earpiece speaker also outputs sound now xD, videos feel more alive to watch now).Thanks to @AgentBuBu for the soundmod.
I just merged his mod with mine..
V1.4 - Changed the earpiece thresholds to remove the crackling sound and readjusted both the speaker sound to the same level. Now enjoy stereo like never before on your kenzo's speakers. Thanks to @Androbots for reporting this.Also made the mod universal by making a magisk and SuperSU version..
V1.45 - Readjusted the values again for both earpiece and loudspeaker to remove distortion completely, increased audio volume through headphone jack without disturbing the quality. So, now there's a very little drop in the audio but the quality is absolute eargasm.
v1.5 - Readjusted and increased the volume of both earpiece and speaker without inducing distortions. The sound level is more than stock now.
And further pushed the volume through headphones for louder volume..Now the stereo feel is amazing..
And included biQuads support for headphones for expert users. Now you can correct the frequency response of your beloved cans, IEMs.
Link for biQuads is here:
https://forum.xda-developers.com/showpost.php?p=70194192&postcount=226
v1.6 - This time made sure to keep the audio levels same at the earpiece and loudspeaker to increase the stereo and ambience.
Very little changes to headphone volume again. Removed some unused codes. Its true stereo now. Enjoy the stereo on speakers like never before
v1.7 - Fixed the messed up headphone gain as reported by @AravindhStanley and now has 2 new versions...
1) Stereo Version - The present version which you guys are using..earpiece acts as the left speaker and loudspeaker acts as the right speaker. The speaker volume and earpiece volume is balanced
2) HTC 10 Version - The new one!!!! it is based on the new HTC 10 loudspeaker audio output.. Its mono but still uses earpiece for sound. But here the earpiece acts as a mid range and bass booster and significantly increases the detail of sound heard through speakers. Here, the loudspeaker is louder than the earpiece. The earpiece just adds detail here. So don't complain about unbalanced audio levels as its kept unbalanced.
This version removes all the audio libs to disable audio offloading to the dsp..Now the audio goes straight to the DAC untouched..
So please flash your audio mods once again after flashing the mod to get them back working.
Now biQuads is fixed by the founder @chdloc himself..So its finally working now....
I recommend all the users to try both the version and keep the ones which you like.
The link to new biQuads is here:
https://forum.xda-developers.com/showpost.php?p=70194192&postcount=226
v1.7fix - This is only for HTC 10 version...Many users would have experienced no audio from the loudspeaker after flashing v1.7(it wasn't intended to work like that). This issue has been fixed. Now enjoy audio on both earpiece and loudspeaker. Loudspeaker has louder volume than earpiece as earpiece just acts like a mid range and bass booster like before.. Enjoy the sound now..
v1.8 - Made significant changes to headphone audio....
Now the audio is decoded at 24bit 192khz..but still the output is 16bit 48khz..wait for the Poweramp to fix it or if anyone knows how to edit audioflinger please pm me...if audioflinger is hacked, 24bit 192khz audio can be made systemwide....
And enabled hardware Dolby and DTS-HPX support...
Use any of the sound mod which has support for them...you will feel a difference..
Nothing much changed in speaker audio..
Reflash your audio mods again....dirty flash
v1.9 - Rebased with the stock mixer_paths.XML and edited it from the start again..its much clean and removed useless codes from the file..
Fixed the bug - in-call voice through speakers even though the phone was in earpiece mode as reported by @AravindhStanley
Finally the mod is universal! One flashable zip for all ROMs and kernels so no hustle of magisk or su versions.
Dropped the HTC10 version as I dint see much potential in it..It will be continued only on demand..
Temporarily removed biQuads support as it requires an in-depth inspection..will include it in the next build..
V2.0 - *Fixed low audio volume on headphones as reported by many....
*Introducing a stock version, which only tweaks the headphone audio leaving the speakers untouched(stock config)
*Reincarnated the HTC10 version as requested by @mahmoudthassan
V2.1 - *added bass filter for earpiece in both htc10 and stereo version to protect the speaker..
*added a bass filter for headphones also to improve bass range which also reduces distortion..
*created an uninstaller for the mod..
V2.2 - *renamed the mod from HI-FI AUDIO PATCH to shox Audio Mod.
*finally implemented biQuads and added my sound signature to the headphone audio output.
*increased the amp volume to 16 to increase output volume.
*included patched kernels which disable audio codec power gating also for the mod as it is mandatory.
V2.3 -
*Finally integrated aroma installer to the mod which contains all the version in one zip file.
*added high impedance version enabled compander which maxes out the amp gain to default 20 for higher impedance earphones (greater than 32ohm) along with the default one which keeps compander off and amp gain to 16
*enabled CLS_H_LP mode for all other audio streams except headphones(this is always CLS_H_HIFI, its the reason this audio mod was made lol) in order to save power while playing audio through speakers.
*removed high pass filter at 150hz for htc10 variant which was present in v2.2 to enhance music experience.
V2.4 -
*fixed installation script bugs as the wrong versions were getting installed which were different from the selected one.
*built on a newer aroma base borrowed from darkness kernel private build.(thanks to @MOVZX) and made the installer simple and effective. Surp
*reverted CLS_H_LP HPH Mode for speakers and earpiece stream because of audio issues. Its always CLS_H_HIFI for all streams.
*disabled compander for high impedance (greater than 16ohms)mixer paths as I felt that it caused a loss in treble and highs.
*implemented biQuads for loudspeaker in stereo version to make thr sound match with earpiece. Now both the speakers output nice and detailed music.
V2.5 -
*made many changes to aroma installer.
*added everything to the aroma installer. Now you can install and uninstall the mod from a single aroma zip itself.
*changed the aroma theme from ICS to HTC.
*best part - added DPG patch to the aroma installer itself. From now there's no need of flashing DPG version of the kernels. Just select yes for patch cmdline disable power gating and the anykernel2 script patches the kernel to work with shox Audio(thanks to @osm0sis and @scrubjay55).
V2.6 -
*added some hardware eq presets using biQuads based on 5-band parametric EQ from neutron music player.
*there are currently 7 presets including the shox signature -
1)shox(default)
2)Acoustic
3)Rock
4)Pop
5)Bass
6)Treble
7)Middle
*these eq presets does not depend on any app and works for all headphone streams.
*removed OTA survival as the users have to flash shox again anyway to patch cmdline after they update a ROM. So removed it as it is kinda useless.
*updated the in-built cmdline patch script which dynamically detects the present cmdline and adds DPG patch lines only when it is not present in cmdline. So no more confusion of patching DPG for any kernel from now on.
*rebased on new dark material AROMA theme borrowed from Zetsubou kernel(thanks to @Ashish94).
V2.65 -
*made minor changes to the anykernel script which now properly patched the cmdline without breaking the selinux for some users.
V3.0 -
*added flat eq.
*added neutral eq
*added Oreo support
*audiophile mode.
*speaker privacy mode.
*speaker boost mode.(needs to be fixed. Doesn't work yet)
*new flash script written from scratch.(added commands as writing from scratch would be a nightmare)
Guide to create your own biQuads:
This is a guide for creating your own biQuads which replaces the existing ones in the mod.
As you all know, biQuads is a set of 5 IIR filters which can be used to enhance the music and also correct the frequency response of the headphones/earphones which you use.
Continue from here only if you know what sampling rate, bit width, lowpass, highpass, peak filters mean. Otherwise google those terms and learn what they are and what they do
So here's how to design your own biQuads and listen the music in your way:
1) Download biQuads flashable zip from the XDA thread here:
https://forum.xda-developers.com/android/software/reference-qualcomm-audio-codec-iir-t3093000
Thank @chdloc for this great work.
2) Flash the zip in recovery and reboot.
3) You will see an app named biQuads in the apps drawer.
4) Open the app and give it root access.
5)As I told earlier, there are biQuads numbering from 1 to 5
6)After every filter you create for every number, tap design biQuad and wait for 20-30sec. You will be redirected to another window where the app check whether the filter is designed correctly or not with a spectrum graph. After that, increase the biQuad number
7) Do the same step 6 again and again from 1 to 5 until your biQuads is ready.
8)Finally, select review filter where you get a final graph and parameters of different IIR filters.
9)Then select save and give your biQuads a name(make sure there are no spaces included in the name). Click accept and the file gets saved in /sdcard with the filename you specified.
10)Open the *.coeffs from /sdcard where * is the name you specified for the biQuads in a text editor.
11) Replace IIR2 with IIR0 wherever found and change INP1 to INP2 wherever found.
12) Finally copy everything from the file and replace the contents in the mixer paths(present in /system/etc) under path name headphones. You will find similar lines there which are my biQuads already implemented.(make sure that you file editor has root access)
13) Replace those lines perfectly and align the lines as they were. Save the file when you are done and reboot.
14) Magic.
Hi , I'm using NOS stable with stock kernel & already have Dolby Atmos installed . What's the use of this mod ? HiFi DAC enhances sound output via headphone jack right ...
Sent from my Redmi Note 3 using Tapatalk
Hey ppl!
If you guys are interested in audio modding or want to know about audio mods and audio in-depth, you can join this telegram group. Believe me, you won't be disappointed.
Link here:
https://telegram.me/joinchat/DXdmNERAlSzg1U--tujB5A
Here's the link for shox testers group:
https://t.me/joinchat/Ggq39kJnNrotMMi2zbKyqw
Make sure that you join here if you have some suggestions or wanna test the latest releases of shox audio.
VaibhavKumar07 said:
Hi , I'm using NOS stable with stock kernel & already have Dolby Atmos installed . What's the use of this mod ? HiFi DAC enhances sound output via headphone jack right ...
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
You are right..
This globally changes the experience as this enhances audio at a hardware-level instead of Dolby which enhances at a software level.
Please try this and inform me about your new audio experience.
ScreaMySkrillEX
Please thank me guys if this works for you all.and don't forget to vote in the poll....
For me there is no audio output anymore. AOSIP 5.8 and Infected
EDIT: Flashed the zip and now it's working but hissing sound is still there
MurdererFight said:
For me there is no audio output anymore. AOSIP 5.8 and Infected
EDIT: Flashed the zip and now it's working but hissing sound is still there
Click to expand...
Click to collapse
Thanks for using this..
And thank you for your reply.
Can you tell me which kernel are you using??
Important note: don't change the headphone gain values in kernel adiutor or ex kernel manager let it be the default one..
Sorry dude..
I didnt read your post correctly..
You are on infected kernel..
Has the hissing sound increased or decreased after flashing this??
ScreaMySkrillEX said:
Sorry dude..
I didnt read your post correctly..
You are on infected kernel..
Has the hissing sound increased or decreased after flashing this??
Click to expand...
Click to collapse
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
MurdererFight said:
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
Click to expand...
Click to collapse
No bro..
@flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
MurdererFight said:
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
Click to expand...
Click to collapse
No bro..
@flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
Here's an update
Try flashing this for more noise removal..
ScreaMySkrillEX said:
No bro..
@flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
Here's an update
Try flashing this for more noise removal..
Click to expand...
Click to collapse
Reduced a but more, still perceptible but it's because of V4Arise. Thanks for the update
MurdererFight said:
Reduced a but more, still perceptible but it's because of V4Arise. Thanks for the update
Click to expand...
Click to collapse
OK. I recommend you to use viper4android standalone apk without arise sound mod as it clogs the audio by adding noise to the soundstage.
Thank you
ScreaMySkrillEX
Appreciate the credit man, thanks!
ZeroInfinity said:
Appreciate the credit man, thanks!
Click to expand...
Click to collapse
You are really the god of android audio modding
I firstly appreciate you for your great work..
Please keep your great work going..
V1.2 is up!!
Changes:
Added some tweaks which will truly enable HiFi audio through the DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or headphone connected.this ensure proper voltage levels through the amp for the earphone/headphone.
Enjoy more subtle and richful audio..
ScreaMySkrillEX
ScreaMySkrillEX said:
V1.2 is up!!
Changes:
Added some tweaks which will truly enable HiFi audio through the DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or headphone connected.this ensure proper voltage levels through the amp for the earphone/headphone.
Enjoy more subtle and richful audio..
ScreaMySkrillEX
Click to expand...
Click to collapse
Wanna try this..
I'm having Nitrogen OS 7.1.2 Stock Kernel, Zcx TWRP with SuperSU installed (Not Magisk),
Arise Dolby ATMOS,
VIPER4ARISE.
Can I use this with Arise Mod?
Ajendra25 said:
Wanna try this..
I'm having Nitrogen OS 7.1.2 Stock Kernel, Zcx TWRP with SuperSU installed (Not Magisk),
Arise Dolby ATMOS,
VIPER4ARISE.
Can I use this with Arise Mod?
Click to expand...
Click to collapse
Yeah! Sure you can..
Try it and tell me..
Please vote the poll..
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Android. Simple to use, great sound quality and a lot of customization.
Steps:
-Extract the attached IRS.zip into Android/data/com.pittvandewitt.viperfx/files/Kernel (For Android 11 follow this tutorial)
-Install latest Viper4Android apk (Download here), open it, grant root access and install the drivers.
-Reboot the device.
IF THE MOD IS NOT WORKING AFTER REBOOT TRY SETTING SELINUX MODE TO PERMISSIVE WITH THIS APP AND/OR INSTALLING AUDIO MODIFICATION LIBRARY MAGISK MODULE
HEADSET
Go to Headset and enable the Master power switch, I suggest you put on your headphones now so you can hear the changes in the sound yourself and tweak them to your liking.
My settings are:
Master power: ON
FIR equalizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: IRS.irs (copy IRS.irs from the rar into Viper4Android/Kernel); Cross Channel: 60%
Dynamic System (enabled); Listening Device: High-end headphone (v2); Dynamic Bass:7%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 115 Hz; Bass Boost: 3.5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:3.5 dB
Auditory system protection (enabled); On; Binaural level:1
Feel free to share your own settings in this thread!
Credits :
- @zhuhang (Official Thread)
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
- @ahrion
Thanks to @sauliiin for his profiles:
"Here I share a lot of profiles and some other stuff for Viper4Android.
Just download, copy it and replace viper4android folder, close and open viper and choose your desired profile. My favorite is "Saulin", that is based on "V4ARISE".
Try and choose the best for you! Peace out!
https://mega.nz/#F!z5UmGaTJ!kWuvdZ7lpJ7Vt0tEsSlR4A"
Any chance of getting this to work on Galaxy fold 3 yet?