[Share] VIPER4ANDROID [[email protected]+Speaker+Bluetooth settings+USB Docks] - Samsung Galaxy Mega

Greetings guys!
Today I'm gonna share my VIPER4ANDROID settings for you guys.You can share yours too here in this thread.First of all,you can download the latest version of viper4android,irs,how to install etc on original thread here http://forum.xda-developers.com/showthread.php?t=2191223.All credits go to @zhuhang and all his friends for making such a beautiful app for boosting our music experience.I'm only share settings for our specific devices.
RULES FOR SHARE YOUR SETTINGS
1.Make sure to state your name/type/model of [email protected] etc.
2.ROM that your running.
3.Music player that you use.
4.What settings you share for whether it's for speaker,earphones etc.
5.An appropriate screenshots/post/ etc of your settings for easy and quick refer by other members.
ENJOY!
These are my settings [earphone & headphone](screenshots below)
1.Stock earphones and music player.
2.Running Megafire V8X rom on my GT-I9205.
3.I will upload settings for speaker later.( No for Bluetooth and usb cause I don't use it).You can share if you want.

Hey dear, please tell me the best setting of hi-resolution music... In viper4android.. I m using Nexus5. I have sony earphones xb70ap. Please suggest me for listening hi-resolution seeting in viper4android... Thanks

Resurrection Remix 4.4.2 N7100 Jetaudio and V-Moda Remix Audio earbuds. Can't find a good setting without the bass going crazy. Thanks
Master Power
V4A-FX is powered on
Convolver
Enable
Impulse Response
Dolby Pro Logic II.IRS
Headphone Surround +
Enable
Level 1
Reverberation
Enable
Room Size
25m2
Sound Field
5m
Damping Factor
0 Percent
Wet Signal
0 Percent
Dry Signal
50 Percent
Fidelity Control
Enable ViPER Bass
Select Bass Frequency
60 Hz
Select Bass Boost
6.0 dB
Enable ViPER Clarity
Select Clarity
3.5 dB
Auditory System Protection
Enable
Select Binaural Level
Moderate
There had some time to refine the settings !

cm 13 remix rom mega 5.8 can i use this app sir..??

I have a Note 3 but I'll share anyway
This is for music only, I shut off V4A for movies, dialogue etc. I'm not sure if the Mega has a processor with NEON or not.
Phone: SM-N900A
Headphones: Shure SE215
Music Player: Poweramp 7.03 alpha (note: must sign up for beta program in Play store)
Playback Gain: OFF
FET Compressor: OFF
DDC: OFF (no, I don't use the SE215 entry; it's terrible)
Spectrum Extension: 1.0
Equalizer: OFF
Convolver: BBE Generic Preset 4
Crossover: 10%
Dynamic System: Common Headphones v2
Dynamic Bass: 24%
ViPER Bass: 78 hz; 8.0 dB
ViPER Clarity: XHiFi; 11.0 dB
CureTech+: OFF
AnalogX: OFF
Master Gain: -10.5 dB
Limit Threshhold: 0 dB
These settings probably won't be any good on low quality earbuds. They need all the extra signal processing crap, but too much of that stuff is a hindrance on high quality IEMs.

If anybody here is interested, I have about 750 .irs files I can post a link for y'all to check them out.
Currently using V4A MK-Mod 2.4.0.1(no TWRP)
Equalizer= Vocal Booster
Convolver= Beats Pro+Beats 40%
VHS+= 2
Dynamic System= High End v2 10%
Viper Bass= Natural 78hz at 8db
Viper Clarity= Ozone+ at 8db
Master Gate= 1.6db and 5:5 and 1.0 limit threshold
Currently using some JVC in ear headphones(don't know the model # atm I picked them up for $20 at Walmart not too long ago.
Oh and I'm using PowerAmp 703 alpha through the beta testing part of the play store.
And I'm using a Razr MAXX HD XT926 w/locked bootloader and 4.4.2 Stock Rom 182.46.15

Earphones
Try soundpeats Q12 wireless earphone to enjoy high quality sound.

Related

[Q&A] [Read OP First] Official ViPER4Android Audio Profiles

Q&A for [Read OP First] Official ViPER4Android Audio Profiles
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Profile sugestions
I'm using shure 215's and listen to mostly metal music. Dose anyone have a good profile for clarity using v4a. Thanks for any help.
tpdeville76 said:
I'm using shure 215's and listen to mostly metal music. Dose anyone have a good profile for clarity using v4a. Thanks for any help.
Click to expand...
Click to collapse
You have some options.
1. Try to make one first.
2. Search the thread for the keyword "shure 215".
3. Just keep trying and/or wait for one to be made.
May I recommend trying some of mine in the OP? Good luck.
Note 3
I want to hear music with deep bass and great sound quality, the headset Galaxy Note 3 under the machine.
Viper4Android FX + Walkman + eXstrembeat 2.0
So I have to install as any?
Sorry for bad english.
---------- Post added at 12:53 PM ---------- Previous post was at 12:47 PM ----------
I want to hear music with deep bass and great sound quality, the headset Galaxy Note 3 under the machine.
Viper4Android FX + Walkman + eXstrembeat 2.0
So I have to install as any?
Sorry for bad english.
Here is my profile for headphone. HULK BASS
what not mentioned left disabled.
MASTER POWER: ✔
PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength : Extreme
(iii) Max Gain: 3x
(iv) Max Output: -1.9 dB
FIREQUALIZER: ✔
(ii) Select Preset: Bass Boost
CONVOLVER: ✔
(ii) Impulse Response: Razor Surround ((Z-Edition)) 7.Stereo+100 Bass.irs
(iii) Cross Chanel: 10%
FIELD SURROUND: ✔
(i) Select Field Surround Strength: Level 3
(ii) Select Mid Image Strength: Extreme
HEADPHONE SURROUND +: ✔
(i) Select Effect Quality: Level 2
FIDELITY CONTROL: ✔
(i) Enable ViPER Bass: ✔
Select Bass Mode: Pure Bass+
Select Bass Frequency: 80 Hz
Select Bass Boost: 14.0 dB
(ii) Enable ViPER Clarity: ✔
Select Clarity Mode: Ozone+
Select Clarity: 13.0 dB
AUDITORY SYSTEM PROTECTION: ✔
(i) Select Binaural Level: Extreme
MASTER GATE (Limiter): ✔
(i) Output Gain: 0.8 dB
(ii) Channel Pan: 0.5:0.5
(iii) Limit Threshold: 0 dB
---------- Post added at 02:14 PM ---------- Previous post was at 02:04 PM ----------
what not mentioned left disabled.
MASTER POWER: ✔
PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength : Extreme
(iii) Max Gain: 3x
(iv) Max Output: -1.9 dB
FIREQUALIZER: ✔
(ii) Select Preset: Bass Boost
CONVOLVER: ✔
(ii) Impulse Response: Razor Surround ((Z-Edition)) 7.Stereo+100 Bass.irs
(iii) Cross Chanel: 10%
FIELD SURROUND: ✔
(i) Select Field Surround Strength: Level 3
(ii) Select Mid Image Strength: Extreme
HEADPHONE SURROUND +: ✔
(i) Select Effect Quality: Level 2
FIDELITY CONTROL: ✔
(i) Enable ViPER Bass: ✔
Select Bass Mode: Pure Bass+
Select Bass Frequency: 80 Hz
Select Bass Boost: 14.0 dB
(ii) Enable ViPER Clarity: ✔
Select Clarity Mode: Ozone+
Select Clarity: 13.0 dB
AUDITORY SYSTEM PROTECTION: ✔
(i) Select Binaural Level: Extreme
MASTER GATE (Limiter): ✔
(i) Output Gain: 0.8 dB
(ii) Channel Pan: 0.5:0.5
(iii) Limit Threshold: 0 dB
tpdeville76 said:
I'm using shure 215's and listen to mostly metal music. Dose anyone have a good profile for clarity using v4a. Thanks for any help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/and...x-profiles-t2945969/post56878387#post56878387
help
i got ath-cks55XiS inear what should profile i use?
mucong123 said:
i got ath-cks55XiS inear what should profile i use?
Click to expand...
Click to collapse
You can start off with my original carnage profile in the op and then tweak it from there if you'd like.
hello
I want to hear music with deep bass and great sound quality.
Device used: Sky pantech Vega a870.
Headphones used: Sony MDR xz310
I'm using Viper4Android FX + Walkman + SoundEnhancement
Thank for any help.
Is there a way to make it so that the vocals dont get quieter when the bass comes in?
Rai8er said:
Is there a way to make it so that the vocals dont get quieter when the bass comes in?
Click to expand...
Click to collapse
You will have to lower the amount of bass.
kingofnice said:
You will have to lower the amount of bass.
Click to expand...
Click to collapse
Alright, thanks
eq setting
Hi I've just installed viper4android from play store....
I've also downloaded a .irs file for my ear-set, but unfortunately I'm not happy with the overall sound until now...
Instead I have found an amazing eq setting for poweramp. Can anyone help me to port this wonderful eq setting in viper4android?
You can find it in this link: goo.gl/E73Mzl
Thank you so much!
Hey... Using Lolliviper (viper4android for and. 5.0) on my htc one with maximus hd... now I need a sound profile for drum and bass thats the sound; ) and is there a irs fir house of Marley exodus on ear headphones? Would be nice if someone could help: )
Sent from my HTC One using XDA Free mobile app
hi
Hello guys... I'm using the House of Marley Exodus- Headphones on my HTC One... I'm listening to Drum and Bass mostly... But I can't find my Headphones or a Audio Profile for Viper... Anyone knows ?
hi guys
i've just installed v4a with the super audio quality driver.
I can't manage to find a new profile for the nexus 5 phone speaker. anyone care to share his profile or settings?
Nexus 5 & Tapatalk.
could Viper4android cause a delay in headset button response?
My phone is a Samsung Galaxy S4 Active SGH-I537. When I receive a call while listening to music, there is often a long delay between pressing the headset button and the call being answered. I know the build.prop settings can slow the audio processing, hence the increase battery drain. Could this be caused by Viper?
chris1379 said:
My phone is a Samsung Galaxy S4 Active SGH-I537. When I receive a call while listening to music, there is often a long delay between pressing the headset button and the call being answered. I know the build.prop settings can slow the audio processing, hence the increase battery drain. Could this be caused by Viper?
Click to expand...
Click to collapse
Uninstall the V4A driver and test.
I am trying it now but the results may be inconclusive. I uninstalled, unrooted and restored build.prop to allow an update. I will have to try it for a while and then reinstall Viper to know which change fixed it. So far it's working OK.
This profile, as reposted below, is pure genius....textured, layered, lush. I measure my music experience by the goosebump factor- and with this preset I get plenty!
The arduous journey of medicocre playback and countless failed attempts to remedy has all been worth it for this!
I am going to also load the other version and see where that takes me. Thanks so much!!
BY ahrion
10th October 2013, 05:44 AM | #154
Enhanced Clarity Pure Bass+ 3.0
For a stunning all-in-one (dance, acoustic, rock, metal, alternative, techno, house, hip hop, etc.) and beautifully clear, pure bass, and quality audio experience used with: Headphones/Earpiece/Auxillary
FX:
1. Master Power:
2. Playback Gain Control: ✘
3. FIREqualizer:
-Select Preset: Custom
–[-2.5] [+2.0] [+6.0] [+3.0] [+0.0] [+0.0] [+0.0] [+3.5] [+1.5] [-3.5]
4. Convolver:
-Impulse Response: Dolby Pro Logic II.irs
-Cross Channel: 0
5. Field Surround: ✘
6. Differential Surround: ✘
7. Headphone Surround +: ✘
8. Reverberation: ✘
9. Dynamic System: ✘
10. Fidelity Control:
-Enable ViPER Bass:
–Select Bass Mode: Pure Bass+
–Select Bass Frequency: 80 Hz
–Select Bass Boost: 10.0 dB
-Enable ViPER Clarity:
–Select Clarity Mode: OZone+
–Select Clarity: 12.0 dB
11. Auditory System Protection (Cure Tech+):
-Select Binaural Level: Extreme
12. Master Gate (Limiter)
-Output Gain: 2.9 dB
-Channel Pan: 0.5 : 0.5 dB
-Limit Threshold: -1.0 dB
XHiFi:
1. Master Power:
2. Playback Gain Control: ✘
3. FIREqualizer: ✘
4. Audio Reconstruct:
-Hi Clarity: 70
-Lo Contour: 50
5. Master Gate (Limiter): ✘

Galaxy s4 mini [share][discussion][music configs]

Hello there guys and girls!
I just make this unique thread to know what peoples are using to fulfill there music listening needs.
Im personally is very huge fan of music. Not only to listen music but listen music with feeeeel. Listening music 10 15 minutes a day.
Share ur thoughts and suggestions what u think is good or best for u. So that we can also try that.
Posts should be like this to manage things in manner and in simplicity.
1.music player ur using
2.mods ur using I.e v4a,Dolby etc
3.custom kernel to more enhance the music
4.ur configurations with ur mods or inbuilt music player customization
(It can be profiles of ur mods like for v4a or just share screenshots)
Here is mine setup,
1.Sony music player(aka walkman)
2.v4afx
3.inbuilt custom kernel in ROM with faux audio(headphones gain with faux tuning app:- left 2 and right 2)
4.my profiles of v4a are in attachments.
Now its ur turn, share ur thoughts so that we can also try.
Guys having trouble in loading previous profiles in new version of v4a and particularly in cm13 based ROM REFER THIS
Have a nice day :good:
Thread reopened at OP request.
Thanks
Razvan
Forum Moderator
1) Samsung Music Player
2) v4fx
3) ----
4) Major settings:
Viper
Playback Gain Control ON
Effect Strength: Extreme
Viper Bass ON
Bass Boost: 16.3 db
Viper Clarity ON
Clarity: 3.5 db
Equalizer ON
Preset Custom
Samsung Sound Alive
Preset equalizer: Rock
Headphones : Philips she9000
Poweramp
viper4android
I've attached my own custom profile
it is not too loud, but it has nice woofer feeling in headphone
i'm using Sennheiser CX 180 Street II Earphones

|kenzo/kate|audio mod|30-04-19|shox Audio Mod v4|reborn

Hello!
Unleash the audio quality of your Redmi Note 3!
This is a sound mod especially designed for the Redmi Note 3 Pro (kenzo /kate) and its Qualcomm Snapdragon 650 chipset.
It also offers option for enhancing audio via speaker,
It is a hardware level modification that enables the disabled CLS_H_HIFI DAC mode of our chipset that enhances the sound.
The aim of this mod is to offer the ability to take full advantage of the IIR filter implementation offered by Qualcomm audio codecs (WCD93xx). The IIR filters are implemented in hardware as a cascade of five biquads that can be designed independently.
FEATURES :
It enhances the soundstage and just ensures a clean audio to be put-out by the hardware. It increases the dynamic range of bass and treble the device can handle.
It enables HiFi or high performance audio on your smartphone without any hissing sound.
The filters are implemented in hardware and independent of the ROM, kernel, and media playback software used.
It is fully compatible with other audio mods like Ainur audio, ARISE sound, ExtremeBeats, and also Viper, James DSP
The additional impact on battery usage is virtually non-existent
Options for enhancing speaker audio:
HTC 10, which uses the earpiece as a secondary speaker
Stereo, which uses the earpiece as the second speaker to provide true stereo sound from speakers.
INSTALLATION :
1. Download the latest release of shox audio from the drive link attached to the second post.
2. Flash zip in TWRP recovery.
3. Follow the onscreen instructions and select the appropriate options.
4. Feel the shox effect!
Note : You have to reflash the mod after every ROM or kernel update
DOWNLOADS:
Download the latest version of shox audio below:
https://drive.google.com/folderview?id=0B5ratNhH-7mGU3AtTVFmekE4VG8
PS:Tested and working on a kenzo/kate smartphone on all roms.
This mod just enhances the soundstage and just ensures a clean audio to be put-out by the hardware. It increases the dynamic range of bass and treble the device can handle.(heavy equalizer and viper4android users definitely know what I'm talking about)
Link to official viper4android website:
https://vipersaudio.com/blog/
The zip file you download is not a recovery flashable one. It contains the Viper4Android apk. So extract the zip and install the apk.. Please dont complain about it.
Recommended tips:
1)I recommend AGNi kernel by @psndna88, Darkness kernel by @MOVZX or Guyver kernel by @MEGAX91 because it has slimbus overclock which enhances audio quality and my mod on his kernel gives the best audio experience. I have also included patched kernels of other devs also if you need them too..
2)Flash Ainur Sauron audio mod made by @UltraM8 along with this mod for a much better experience.This is currently the best audio mod which is the cleanest..Please thank him for his great work...
Link here: https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
3)Users who need more tweaking to the audio can use Viper4Android.
4)I have included some of the best IRS samples for viper4android(according to me). So try it out if you are using viper4android for complete control over your music. Extract the zip and place the contents in viper4android/kernel directory of your internal storage.(the zip provided is not recovery flashable).
5)People who use MX player for videos can enable SW audio boost which will further increase the sound levels through speakers without any distortions..
It is recommended not to listen through speakers at full volume for longer periods.. Keep the volume low by 1 or 2 steps from the max.
6)People who think that the present max volume through headphones isn't enough can install viper4android and increase output gain to 6dB in master gate..
My personal Viper4Android settings:
Master power - on
Playback gain control - off
FET compressor - off
Viper DDC - on, set to sennheiser hd558
Spectrum extension - on, set to 1.0
Firequalizer - off
Convolver - off
Differential surround, field surround, headphone surround+, reverberation - all set to off
Dynamic system - off
Viper bass - off
Viper clarity - off
Tube sound simulator - off
AnalogX - on, set to extreme
Some other info:
My earphones :
1) Sennheiser cx180 street-II - daily outdoor use.
2) Skullcandy Ink'D - used rarely.
3) Sony MDR-ED12LP - used when I'm at home.
List of smartphones I own right now:
1) Xiaomi Redmi Note 3(kenzo)
2) Samsung Galaxy S(i9000)
3) Xiaomi Redmi Note 4(Mido)
4) Samsung Galaxy Note(n7000)
CHANGELOGS:-
V1 - initial release.
V1.1 - tweaked the values a bit to further remove the hissing noise as reported by @MurdererFight.(thanks bro for being the first tester and reporting me)
V1.2 - added some tweaks which will truly enable HiFi audio through DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or the headphone connected.this ensures proper voltage levels through the amp for the earphones/headphones.
V1.3 - Merged surround audio mod along with hifi audio..
Enjoy stereo-like sound on your kenzo (earpiece speaker also outputs sound now xD, videos feel more alive to watch now).Thanks to @AgentBuBu for the soundmod.
I just merged his mod with mine..
V1.4 - Changed the earpiece thresholds to remove the crackling sound and readjusted both the speaker sound to the same level. Now enjoy stereo like never before on your kenzo's speakers. Thanks to @Androbots for reporting this.Also made the mod universal by making a magisk and SuperSU version..
V1.45 - Readjusted the values again for both earpiece and loudspeaker to remove distortion completely, increased audio volume through headphone jack without disturbing the quality. So, now there's a very little drop in the audio but the quality is absolute eargasm.
v1.5 - Readjusted and increased the volume of both earpiece and speaker without inducing distortions. The sound level is more than stock now.
And further pushed the volume through headphones for louder volume..Now the stereo feel is amazing..
And included biQuads support for headphones for expert users. Now you can correct the frequency response of your beloved cans, IEMs.
Link for biQuads is here:
https://forum.xda-developers.com/showpost.php?p=70194192&postcount=226
v1.6 - This time made sure to keep the audio levels same at the earpiece and loudspeaker to increase the stereo and ambience.
Very little changes to headphone volume again. Removed some unused codes. Its true stereo now. Enjoy the stereo on speakers like never before
v1.7 - Fixed the messed up headphone gain as reported by @AravindhStanley and now has 2 new versions...
1) Stereo Version - The present version which you guys are using..earpiece acts as the left speaker and loudspeaker acts as the right speaker. The speaker volume and earpiece volume is balanced
2) HTC 10 Version - The new one!!!! it is based on the new HTC 10 loudspeaker audio output.. Its mono but still uses earpiece for sound. But here the earpiece acts as a mid range and bass booster and significantly increases the detail of sound heard through speakers. Here, the loudspeaker is louder than the earpiece. The earpiece just adds detail here. So don't complain about unbalanced audio levels as its kept unbalanced.
This version removes all the audio libs to disable audio offloading to the dsp..Now the audio goes straight to the DAC untouched..
So please flash your audio mods once again after flashing the mod to get them back working.
Now biQuads is fixed by the founder @chdloc himself..So its finally working now....
I recommend all the users to try both the version and keep the ones which you like.
The link to new biQuads is here:
https://forum.xda-developers.com/showpost.php?p=70194192&postcount=226
v1.7fix - This is only for HTC 10 version...Many users would have experienced no audio from the loudspeaker after flashing v1.7(it wasn't intended to work like that). This issue has been fixed. Now enjoy audio on both earpiece and loudspeaker. Loudspeaker has louder volume than earpiece as earpiece just acts like a mid range and bass booster like before.. Enjoy the sound now..
v1.8 - Made significant changes to headphone audio....
Now the audio is decoded at 24bit 192khz..but still the output is 16bit 48khz..wait for the Poweramp to fix it or if anyone knows how to edit audioflinger please pm me...if audioflinger is hacked, 24bit 192khz audio can be made systemwide....
And enabled hardware Dolby and DTS-HPX support...
Use any of the sound mod which has support for them...you will feel a difference..
Nothing much changed in speaker audio..
Reflash your audio mods again....dirty flash
v1.9 - Rebased with the stock mixer_paths.XML and edited it from the start again..its much clean and removed useless codes from the file..
Fixed the bug - in-call voice through speakers even though the phone was in earpiece mode as reported by @AravindhStanley
Finally the mod is universal! One flashable zip for all ROMs and kernels so no hustle of magisk or su versions.
Dropped the HTC10 version as I dint see much potential in it..It will be continued only on demand..
Temporarily removed biQuads support as it requires an in-depth inspection..will include it in the next build..
V2.0 - *Fixed low audio volume on headphones as reported by many....
*Introducing a stock version, which only tweaks the headphone audio leaving the speakers untouched(stock config)
*Reincarnated the HTC10 version as requested by @mahmoudthassan
V2.1 - *added bass filter for earpiece in both htc10 and stereo version to protect the speaker..
*added a bass filter for headphones also to improve bass range which also reduces distortion..
*created an uninstaller for the mod..
V2.2 - *renamed the mod from HI-FI AUDIO PATCH to shox Audio Mod.
*finally implemented biQuads and added my sound signature to the headphone audio output.
*increased the amp volume to 16 to increase output volume.
*included patched kernels which disable audio codec power gating also for the mod as it is mandatory.
V2.3 -
*Finally integrated aroma installer to the mod which contains all the version in one zip file.
*added high impedance version enabled compander which maxes out the amp gain to default 20 for higher impedance earphones (greater than 32ohm) along with the default one which keeps compander off and amp gain to 16
*enabled CLS_H_LP mode for all other audio streams except headphones(this is always CLS_H_HIFI, its the reason this audio mod was made lol) in order to save power while playing audio through speakers.
*removed high pass filter at 150hz for htc10 variant which was present in v2.2 to enhance music experience.
V2.4 -
*fixed installation script bugs as the wrong versions were getting installed which were different from the selected one.
*built on a newer aroma base borrowed from darkness kernel private build.(thanks to @MOVZX) and made the installer simple and effective. Surp
*reverted CLS_H_LP HPH Mode for speakers and earpiece stream because of audio issues. Its always CLS_H_HIFI for all streams.
*disabled compander for high impedance (greater than 16ohms)mixer paths as I felt that it caused a loss in treble and highs.
*implemented biQuads for loudspeaker in stereo version to make thr sound match with earpiece. Now both the speakers output nice and detailed music.
V2.5 -
*made many changes to aroma installer.
*added everything to the aroma installer. Now you can install and uninstall the mod from a single aroma zip itself.
*changed the aroma theme from ICS to HTC.
*best part - added DPG patch to the aroma installer itself. From now there's no need of flashing DPG version of the kernels. Just select yes for patch cmdline disable power gating and the anykernel2 script patches the kernel to work with shox Audio(thanks to @osm0sis and @scrubjay55).
V2.6 -
*added some hardware eq presets using biQuads based on 5-band parametric EQ from neutron music player.
*there are currently 7 presets including the shox signature -
1)shox(default)
2)Acoustic
3)Rock
4)Pop
5)Bass
6)Treble
7)Middle
*these eq presets does not depend on any app and works for all headphone streams.
*removed OTA survival as the users have to flash shox again anyway to patch cmdline after they update a ROM. So removed it as it is kinda useless.
*updated the in-built cmdline patch script which dynamically detects the present cmdline and adds DPG patch lines only when it is not present in cmdline. So no more confusion of patching DPG for any kernel from now on.
*rebased on new dark material AROMA theme borrowed from Zetsubou kernel(thanks to @Ashish94).
V2.65 -
*made minor changes to the anykernel script which now properly patched the cmdline without breaking the selinux for some users.
V3.0 -
*added flat eq.
*added neutral eq
*added Oreo support
*audiophile mode.
*speaker privacy mode.
*speaker boost mode.(needs to be fixed. Doesn't work yet)
*new flash script written from scratch.(added commands as writing from scratch would be a nightmare)
Guide to create your own biQuads:
This is a guide for creating your own biQuads which replaces the existing ones in the mod.
As you all know, biQuads is a set of 5 IIR filters which can be used to enhance the music and also correct the frequency response of the headphones/earphones which you use.
Continue from here only if you know what sampling rate, bit width, lowpass, highpass, peak filters mean. Otherwise google those terms and learn what they are and what they do
So here's how to design your own biQuads and listen the music in your way:
1) Download biQuads flashable zip from the XDA thread here:
https://forum.xda-developers.com/android/software/reference-qualcomm-audio-codec-iir-t3093000
Thank @chdloc for this great work.
2) Flash the zip in recovery and reboot.
3) You will see an app named biQuads in the apps drawer.
4) Open the app and give it root access.
5)As I told earlier, there are biQuads numbering from 1 to 5
6)After every filter you create for every number, tap design biQuad and wait for 20-30sec. You will be redirected to another window where the app check whether the filter is designed correctly or not with a spectrum graph. After that, increase the biQuad number
7) Do the same step 6 again and again from 1 to 5 until your biQuads is ready.
8)Finally, select review filter where you get a final graph and parameters of different IIR filters.
9)Then select save and give your biQuads a name(make sure there are no spaces included in the name). Click accept and the file gets saved in /sdcard with the filename you specified.
10)Open the *.coeffs from /sdcard where * is the name you specified for the biQuads in a text editor.
11) Replace IIR2 with IIR0 wherever found and change INP1 to INP2 wherever found.
12) Finally copy everything from the file and replace the contents in the mixer paths(present in /system/etc) under path name headphones. You will find similar lines there which are my biQuads already implemented.(make sure that you file editor has root access)
13) Replace those lines perfectly and align the lines as they were. Save the file when you are done and reboot.
14) Magic.
Hi , I'm using NOS stable with stock kernel & already have Dolby Atmos installed . What's the use of this mod ? HiFi DAC enhances sound output via headphone jack right ...
Sent from my Redmi Note 3 using Tapatalk
Hey ppl!
If you guys are interested in audio modding or want to know about audio mods and audio in-depth, you can join this telegram group. Believe me, you won't be disappointed.
Link here:
https://telegram.me/joinchat/DXdmNERAlSzg1U--tujB5A
Here's the link for shox testers group:
https://t.me/joinchat/Ggq39kJnNrotMMi2zbKyqw
Make sure that you join here if you have some suggestions or wanna test the latest releases of shox audio.
VaibhavKumar07 said:
Hi , I'm using NOS stable with stock kernel & already have Dolby Atmos installed . What's the use of this mod ? HiFi DAC enhances sound output via headphone jack right ...
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
You are right..
This globally changes the experience as this enhances audio at a hardware-level instead of Dolby which enhances at a software level.
Please try this and inform me about your new audio experience.
ScreaMySkrillEX
Please thank me guys if this works for you all.and don't forget to vote in the poll....
For me there is no audio output anymore. AOSIP 5.8 and Infected
EDIT: Flashed the zip and now it's working but hissing sound is still there
MurdererFight said:
For me there is no audio output anymore. AOSIP 5.8 and Infected
EDIT: Flashed the zip and now it's working but hissing sound is still there
Click to expand...
Click to collapse
Thanks for using this..
And thank you for your reply.
Can you tell me which kernel are you using??
Important note: don't change the headphone gain values in kernel adiutor or ex kernel manager let it be the default one..
Sorry dude..
I didnt read your post correctly..
You are on infected kernel..
Has the hissing sound increased or decreased after flashing this??
ScreaMySkrillEX said:
Sorry dude..
I didnt read your post correctly..
You are on infected kernel..
Has the hissing sound increased or decreased after flashing this??
Click to expand...
Click to collapse
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
MurdererFight said:
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
Click to expand...
Click to collapse
No bro..
 @flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
MurdererFight said:
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
Click to expand...
Click to collapse
No bro..
 @flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
Here's an update
Try flashing this for more noise removal..
ScreaMySkrillEX said:
No bro..
@flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
Here's an update
Try flashing this for more noise removal..
Click to expand...
Click to collapse
Reduced a but more, still perceptible but it's because of V4Arise. Thanks for the update
MurdererFight said:
Reduced a but more, still perceptible but it's because of V4Arise. Thanks for the update
Click to expand...
Click to collapse
OK. I recommend you to use viper4android standalone apk without arise sound mod as it clogs the audio by adding noise to the soundstage.
Thank you
ScreaMySkrillEX
Appreciate the credit man, thanks!
ZeroInfinity said:
Appreciate the credit man, thanks!
Click to expand...
Click to collapse
You are really the god of android audio modding
I firstly appreciate you for your great work..
Please keep your great work going..
V1.2 is up!!
Changes:
Added some tweaks which will truly enable HiFi audio through the DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or headphone connected.this ensure proper voltage levels through the amp for the earphone/headphone.
Enjoy more subtle and richful audio..
ScreaMySkrillEX
ScreaMySkrillEX said:
V1.2 is up!!
Changes:
Added some tweaks which will truly enable HiFi audio through the DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or headphone connected.this ensure proper voltage levels through the amp for the earphone/headphone.
Enjoy more subtle and richful audio..
ScreaMySkrillEX
Click to expand...
Click to collapse
Wanna try this..
I'm having Nitrogen OS 7.1.2 Stock Kernel, Zcx TWRP with SuperSU installed (Not Magisk),
Arise Dolby ATMOS,
VIPER4ARISE.
Can I use this with Arise Mod?
Ajendra25 said:
Wanna try this..
I'm having Nitrogen OS 7.1.2 Stock Kernel, Zcx TWRP with SuperSU installed (Not Magisk),
Arise Dolby ATMOS,
VIPER4ARISE.
Can I use this with Arise Mod?
Click to expand...
Click to collapse
Yeah! Sure you can..
Try it and tell me..
Please vote the poll..

Viper4android built-in spreakers sound profiles (settings)

So there is no thread like this for the 6p where viper users could share their sound profiles and opinions about the sound enhancements you can achieve with viper4android specifically on the speakers. Here is mine: https://drive.google.com/file/d/0Bx_H00kDXlWPVG5FRDEyX2RLOFU/view?usp=drivesdk
Extract the zip and copy its contents into the viper folder on your sd then load up the profile in the viper app. The profile is called sahne. I tuned it to this piece of video: https://youtu.be/73LNmkL4tfg
Njoy
Sent from my Nexus 6P using Tapatalk
I use these settings I found on reddit
Headphones:
Spectrum Expansion - 0.7
Dynamic System - Common Earphone V2, 30%
Viper Bass - Natural, 66 Hz, 8.0 dB
Phone Speakers:
Speaker Optimization - Enabled
eXtra-Loud - Moderate, 5x Max Gain, -1.9 dB Max Output
Azdian said:
I use these settings I found on reddit
Headphones:
Spectrum Expansion - 0.7
Dynamic System - Common Earphone V2, 30%
Viper Bass - Natural, 66 Hz, 8.0 dB
Phone Speakers:
Speaker Optimization - Enabled
eXtra-Loud - Moderate, 5x Max Gain, -1.9 dB Max Output
Click to expand...
Click to collapse
Try the convolver (irs) i have in my zip and set it to 80%. And use it for the speakers only. And set the highs a bit higher in the eq. Or just take my profile
Sent from my Nexus 6P using Tapatalk
and313 said:
Try the convolver (irs) i have in my zip and set it to 80%. And use it for the speakers only. And set the highs a bit higher in the eq. Or just take my profile
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Didn't go well, I can barely hear the incoming messages notifications :/
What's a spreaker?
Azdian said:
Didn't go well, I can barely hear the incoming messages notifications :/
Click to expand...
Click to collapse
hm either you are doing something wrong or i forgot to resave the profile. Here is the resaved one:
https://drive.google.com/open?id=0Bx_H00kDXlWPeDRPSjRpb3FMOFk
this is what you should be seeing under speaker:
http://imgur.com/a/FDdD9
And also make sure your gate limiter is set right
and a word of advice. if you are not using convolvers (irs samples) you are missing out on the best part of viper.

Viper4Android - Best settings for mi8 [MOD] [MAGISK] [V4A] [AUDIO]

So I'm sharing with you what I have on my device after hours of searching around and experimenting. I personally like a nice Bass but also clarity in the artists' voice and instruments and these settings bring out the best in both. Thanks to @pavaosk for his thread on the mi8 lite thread (his settings give a lot of noise but I've tweaked it to work best with our device).
Earphones: TFZ Balance 1 IEM
Magisk: 19.3 stable
Viper4android: FX Legacy v4.3 (2.5.0.5)
Files: attached
Steps:
Flash the v4a magisk module through Magisk Manager and follow module instructions, reboot, and open the v4a app.
Use the following settings under the HEADSET tab:
Master power: ON
Playback gain control: OFF
FET compressor: OFF
ViPER-DDC: OFF
Spectrum Extension: OFF
FIREqualizer: ON
Preset: Acoustic
Convolver: ON - important!
Impulse Response: SUPERIOR
(Unzip the attached and place the file 'Superior Bass.irs.wav' into Viper4Android/Kernel using file explorer)
Cross Channel: 16% (if you increase this more than 16% you will lose dual channel playback)
Field Surround: ON
Field surround strength: slight
Mid image strength: Level 5
Differential sound: OFF
Headphone surround +: ON
Level: 1
Reverberation: OFF
Dynamic System: ON
Listening Device: High-end headphone v2
Dynamic Bass: 24%
Tube sound simulator: OFF
Viper Bass: ON
Bass mode: Natural bass
Bass Frequency: 60 Hz
Bass Boost: 6.0 to 10.0 dB
Viper Clarity: ON
Clarity mode: XHIFI
Clarity: 10.0 dB
Master gate:
Channel pan: 0
Output gain: -6.0 dB
Limit threshold: 0 dB
And BOOM! Feel the difference..
Let me know what your settings are if if this helped give you a better listening experience. Tweak these a little to suit your ears and earphone hardware. All credits to the devs and I'm only sharing my settings here.
Feel free to share your own settings in this thread!
Credits :
- @zhuhang (Official Thread)
- @pavaosk (mi8 Thread)
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
- @ahrion
There are no best settings when it comes to earphone and headphone experience. Every device has its own characteristics and needs to be configured accordingly. Also, everybody has their own taste.
Thanks anyways, I'll definitely give a shot.
Best settings ?! ROFL ???? wake up kid ?

Categories

Resources