AUDIO ENHANCEMENTS FOR ACE[BEATS AUDIO/SRS WOW/ALSA/MEGABASS]
This Thread contains a list of audio Enhancements for our Galaxy ace.
QUICK LIST :
1.Beats Audio [ANY ROM]
The complete set of beats audio lib for ace with the Beats GUI.
http://forum.xda-developers.com/showthread.php?t=1543351
2.SRS WOW [ONLY Android 4.0.1 or High]
SRS WOW effect with bass enchancement.
Shared OP http://forum.xda-developers.com/showthread.php?t=1616717
3.MegaBassBeats [ANY ROM]
More sound,clearer bass and no crackling sound as the OP claims
http://forum.xda-developers.com/showthread.php?t=1620904
4.ALSA [CM7.x based ROM`s]
Beats audio engine + Alsa + AudioFXwidget
http://forum.xda-developers.com/showthread.php?t=1653140
DETAILED LIST :
1.Beats Audio [Any ROM]
http://forum.xda-developers.com/showthread.php?t=1543351
This Link provides beats GUI that contains the beats headset icon,the beats boot animation,beats themed music played and beats wallpaper.
Works on all ROMs.
Sound Quality is a little enhanced with louder sound and increased bass.
Contains no additonal manual audio tweaks, sound quality is auto tweaked while flashing.
Works well with DSP Manager.
The beats audio aka beats aceport is included in this post and can be flashed separately.
2.SRS WOW [Only Andriod 4.0.1 or higher][My personal Recommendation]
Shared OP http://forum.xda-developers.com/showthread.php?t=1616717
This Link gives almost real SRS Audio Effects as the OP Claims.
This is for those who find the beats audio a placebo.
Contains SRS WOW,SRS TrueBass,Android Equalizer,Android Normalizer,EQ Presets and a patched Music FX called SRS panel.
Follow the instructions in the OP to flash this.
For those who have problems flashing or too lazy to follow the steps, i have Maclaw's CM9 latest Nightly release with the SRS WOW effect.
Just Download the ROM, flash it and start using.
Link to CM9 Nightly by Maclaw with SRS WOW: http://www.mediafire.com/?zssx0kmtesp5se7
3.MegaBassBeats [ANY ROM]
Link to OP: http://forum.xda-developers.com/showthread.php?t=1620904
This Link gives you more louder speaker, more louder headphones, much more clearer bass and does not make crackling sound.
Flashable file attached.
4.ALSA [CM7.x based ROM`s]
Link to OP: http://forum.xda-developers.com/showthread.php?t=1653140
This link gives you the Advanced Linux Sound Architecturehttp://www.alsa-project.org/main/index.php/Main_Page
Remove DSP Manager app using Link2SD.
Flash the included beats_by_contradictor_V2.07_Alsa.zip.
Reboot and install the com.namakerorin.audiofxwidget.apk.
Start using.
Detailed instructions are on the OP.
NOTE/Personal Recommendation :
1. Flash any one of these.
Combining multiple audio enhancements may result in unstable behavior.
2. To test, use good quality headphones and try playing a FLAC file with more beats.
Always FLAC files are better in sound quality than Mp3's since they use lossless audio unlike Mp3's.
3. The SRS WOW on Maclaw's recent nightly release sounds just great to me, that is why I've included the ROM with SRS WOW for you.
I use Monster beats headphones and the SRS WOW just amuses me.
On higher end headphones[not earphones] like beats, try not to increase the bass at all.
Just keep the SRS WOW to Max and leave the bass to minimum.
Any other Requests please let me know
Thanks
Which one will work for CM10 Jellaxy by lagloose?
Hi, guys,
I would like to know which you find is the best music player for a JB ROM on our device? By best I mean:
-Sound quality
-Features (for example equalizer)
-DSP-Manager support
-Minimum size
-Design
Thanks for the awnsers .
Sent from my U20i using xda app-developers app
I recommend you Android Music Player. It havent got a good design but it fast, simply and size of them is about 1MB. Also you can download Songbird Music Player (with nice design). I thinh in google play store is now avaible google music player, but the size of this app i big
Sorry for my english
First of all, thanks for the suggestion. Do you know where to get a working version for JB (I dont mean the one from play store)?
Does songbird have DSP/Manager support?
yo can look here and search for the music player apps you need there are some for JB too
Mixzing 2.6.2 is only 1.17mb and has the better Eq settings of them all ( every song can have is own preset ).
JetAudio Basic - it's 6 to 7mb but drains as much battery as the normal player of androids, and has Eq, Wide Stereo, Bass Enhacement, Reverb and AGC.
PowerAmp - 3mb, Drains less battery than both of them and has EQ/Stereo Widening/Limit Compressor/Gain. This apk is paid xD.
These are the best.
AW: JB Music Player
Hey,guys, I just found a great solution to my/our problem: XingPlayer:
-Lyric support
-Album art support
-DSP-Manager support
-Great design
-Sleep timer
-Lockscreen widget/notification bar wiget
-And its only 2 mb
I tested Jetaudio Basic, and my first impression was "Dang!!! Great Player! Look at all the features!", but then I tested equalizer and xbass on my headphones and the Sound just completely crapped up (I was listening to Snow by the Red Hot Chili Peppers). This never happened to me with players that used DSP-Manager as equalizer . I havn't tried Sonbird yet, so we'll have to see with that one...
Sent from my U20i using xda app-developers app
Kilroy. said:
Hey,guys, I just found a great solution to my/our problem: XingPlayer:
-Lyric support
-Album art support
-DSP-Manager support
-Great design
-Sleep timer
-Lockscreen widget/notification bar wiget
-And its only 2 mb
I tested Jetaudio Basic, and my first impression was "Dang!!! Great Player! Look at all the features!", but then I tested equalizer and xbass on my headphones and the Sound just completely crapped up (I was listening to Snow by the Red Hot Chili Peppers). This never happened to me with players that used DSP-Manager as equalizer . I havn't tried Sonbird yet, so we'll have to see with that one...
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
How did you use Jetaudio? remember that jetaudio already has an eq and all other effects, so you can't have dsp active if the player already has an eq, Eq + Eq = Colision of Eq's, so if you want a good sound don't use 2 eq's at the same time, don't abuse on the use of wide stereo and reverb and x-bass. Mixzing has an eq 2 and the very best eq settings because every song can have its own preset, and it's only 1.17mb, less than 2mb of xingplayer.
This are players to be used without a second eq, with second eq i'm meaning of Dsp managers and eq's that are not included on the players.
But if you want a good single player to work with dps manager, then you got these: https://play.google.com/store/apps/...251bGwsMSwxLDEsImNvbS5qcnRzdHVkaW8ubXVzaWMiXQ.. less than 1mb, this https://play.google.com/store/apps/...=W251bGwsMSwxLDEsImNvbS5lbGlmZXJ1bi5tdXNpYyJd 1.1mb, https://play.google.com/store/apps/...GwsMSwxLDEsImNvbS5uZXBzcXVhcmUuTlNQbGF5ZXIiXQ.. 405kb, https://play.google.com/store/apps/...SwxLDEsImNuLnZvaWxldC5nb29kdm9pY2VwbGF5ZXIiXQ.. 345kb, https://play.google.com/store/apps/...ch_result#?t=W251bGwsMSwxLDEsImtlLnBsYXllciJd only 153kb, https://play.google.com/store/apps/...SwxLDEsImNvbS5rYW5lLnhwbGF5LmFjdGl2aXRpZXMiXQ.. 2.9mb and has eq bass enhancement and virtualizer ( i think it would sound cool if you tweak the virtualizer and make nice eq settings with the player or the dsp manager ), https://play.google.com/store/apps/...DEsImpwLnUxYXJ5ei5wcm9kdWN0cy5tZWRpYXBsdXMiXQ.. 492kb and it's good looking, and i think that's all xD, tell me if you like some of those .
AW: JB Music Player
Crazy Seed said:
How did you use Jetaudio? remember that jetaudio already has an eq and all other effects, so you can't have dsp active if the player already has an eq, Eq + Eq = Colision of Eq's, so if you want a good sound don't use 2 eq's at the same time, don't abuse on the use of wide stereo and reverb and x-bass. Mixzing has an eq 2 and the very best eq settings because every song can have its own preset, and it's only 1.17mb, less than 2mb of xingplayer.
This are players to be used without a second eq, with second eq i'm meaning of Dsp managers and eq's that are not included on the players.
But if you want a good single player to work with dps manager, then you got these: https://play.google.com/store/apps/...251bGwsMSwxLDEsImNvbS5qcnRzdHVkaW8ubXVzaWMiXQ.. less than 1mb, this https://play.google.com/store/apps/...=W251bGwsMSwxLDEsImNvbS5lbGlmZXJ1bi5tdXNpYyJd 1.1mb, https://play.google.com/store/apps/...GwsMSwxLDEsImNvbS5uZXBzcXVhcmUuTlNQbGF5ZXIiXQ.. 405kb, https://play.google.com/store/apps/...SwxLDEsImNuLnZvaWxldC5nb29kdm9pY2VwbGF5ZXIiXQ.. 345kb, https://play.google.com/store/apps/...ch_result#?t=W251bGwsMSwxLDEsImtlLnBsYXllciJd only 153kb, https://play.google.com/store/apps/...SwxLDEsImNvbS5rYW5lLnhwbGF5LmFjdGl2aXRpZXMiXQ.. 2.9mb and has eq bass enhancement and virtualizer ( i think it would sound cool if you tweak the virtualizer and make nice eq settings with the player or the dsp manager ), https://play.google.com/store/apps/...DEsImpwLnUxYXJ5ei5wcm9kdWN0cy5tZWRpYXBsdXMiXQ.. 492kb and it's good looking, and i think that's all xD, tell me if you like some of those .
Click to expand...
Click to collapse
Thanks for all your trouble! I didn't even know there where so many good music players out there! My personal favourite on your list was MediaPlus player because of the style, the performance and the size. It would have easily beaten Xing, if DSP-manager had supported it: This is what happened: I killed DSP-manager and all music apps left on my phone (xing and mediaplus). Then I restarted DSP-manager and opened mediaplus, played a song, but DSP-managers sound effects didn't kick in, no matter how often I opened dsp and fiddled with the settings. The , I tried xing and the sound effects kicked in immediatly! Why don't you give it a try?
https://play.google.com/store/apps/...dium=organic&utm_term=xing+player+google+play
As for JetAudio, no, I didn't use Dsp, I actually deleted dsp to stop it interfering while testing JetAudio. Once I turned xbass and everything off, the sound didn't crap up, but then the sound quality wasn't comparable to a dsp-powered music application.
Sent from my U20i using xda app-developers app
Kilroy. said:
Thanks for all your trouble! I didn't even know there where so many good music players out there! My personal favourite on your list was MediaPlus player because of the style, the performance and the size. It would have easily beaten Xing, if DSP-manager had supported it: This is what happened: I killed DSP-manager and all music apps left on my phone (xing and mediaplus). Then I restarted DSP-manager and opened mediaplus, played a song, but DSP-managers sound effects didn't kick in, no matter how often I opened dsp and fiddled with the settings. The , I tried xing and the sound effects kicked in immediatly! Why don't you give it a try?
https://play.google.com/store/apps/...dium=organic&utm_term=xing+player+google+play
As for JetAudio, no, I didn't use Dsp, I actually deleted dsp to stop it interfering while testing JetAudio. Once I turned xbass and everything off, the sound didn't crap up, but then the sound quality wasn't comparable to a dsp-powered music application.
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
http://www.1mobile.com/equalizer-music-player-664712.html - This one without dsp just using its eq settings have very nice sound for me, for me i put Rock preset then slide almost all the way up the 3rd bar of the Eq then volume all way up and the bass in the left area almost all the way down, and important ( don't select any rverb effects on the bottom, just use the bars ) it sounded very nice for me, very loud with quality! but that was for me, i don't know if you would like the sound with these settings, give it a try . I'll answer to the rest of your post later, i'm gonna eat now xD.
---------- Post added at 09:54 PM ---------- Previous post was at 09:08 PM ----------
Kilroy. said:
Thanks for all your trouble! I didn't even know there where so many good music players out there! My personal favourite on your list was MediaPlus player because of the style, the performance and the size. It would have easily beaten Xing, if DSP-manager had supported it: This is what happened: I killed DSP-manager and all music apps left on my phone (xing and mediaplus). Then I restarted DSP-manager and opened mediaplus, played a song, but DSP-managers sound effects didn't kick in, no matter how often I opened dsp and fiddled with the settings. The , I tried xing and the sound effects kicked in immediatly! Why don't you give it a try?
https://play.google.com/store/apps/...dium=organic&utm_term=xing+player+google+play
As for JetAudio, no, I didn't use Dsp, I actually deleted dsp to stop it interfering while testing JetAudio. Once I turned xbass and everything off, the sound didn't crap up, but then the sound quality wasn't comparable to a dsp-powered music application.
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
You're welcome! Yes there are but the best ones are too much for our mini pro to handle :S, i always wanted to try Neutron Music Player but it always force closes on this phone :S. yes i really looks good, but if it doesn't support dsp that's too bad. Did you check every option of the mediaplus to see if it had anything to (enable) dsp or sound effects? About xingplayer it looks like the original music app that already is in the roms but the roms version is already 1mb or less and compatible with dsp, so i think for now the original music app of the rom wins.
Honestly i don't see what is the difference beetween using or not the dsp manager comparing to music players with eq and effects in it, i used both techniques and the results are very much the same, but that EQ music player is the one i liked the most in terms of sound quality/volume.
About jetaudio, i think that everything is pretty much the same, dsp changes volume but pre-amp of jetaudio does 2, dsp changes eq but jetaudio does it 2, both have reverb effects as well, so i think there is no real difference beetween players with everything in it and dsp supported players, at least i didn't hear the difference beetween both techniques.
AW: JB Music Player
Crazy Seed said:
http://www.1mobile.com/equalizer-music-player-664712.html - This one without dsp just using its eq settings have very nice sound for me, for me i put Rock preset then slide almost all the way up the 3rd bar of the Eq then volume all way up and the bass in the left area almost all the way down, and important ( don't select any rverb effects on the bottom, just use the bars ) it sounded very nice for me, very loud with quality! but that was for me, i don't know if you would like the sound with these settings, give it a try . I'll answer to the rest of your post later, i'm gonna eat now xD.
---------- Post added at 09:54 PM ---------- Previous post was at 09:08 PM ----------
You're welcome! Yes there are but the best ones are too much for our mini pro to handle :S, i always wanted to try Neutron Music Player but it always force closes on this phone :S. yes i really looks good, but if it doesn't support dsp that's too bad. Did you check every option of the mediaplus to see if it had anything to (enable) dsp or sound effects? About xingplayer it looks like the original music app that already is in the roms but the roms version is already 1mb or less and compatible with dsp, so i think for now the original music app of the rom wins.
Honestly i don't see what is the difference beetween using or not the dsp manager comparing to music players with eq and effects in it, i used both techniques and the results are very much the same, but that EQ music player is the one i liked the most in terms of sound quality/volume.
About jetaudio, i think that everything is pretty much the same, dsp changes volume but pre-amp of jetaudio does 2, dsp changes eq but jetaudio does it 2, both have reverb effects as well, so i think there is no real difference beetween players with everything in it and dsp supported players, at least i didn't hear the difference beetween both techniques.
Click to expand...
Click to collapse
Now, this is very interesting, because on my phone, comparing dsp-powered apps with preinstalled equalizer apps is like comparing night with day: I think DSP-Manager makes the sound SO much better, no idea why you don't hear any difference. Hmm...
PS.: Have you tested my Rom with nAa's new kernel (why the heck did he call it v02, when the older version is called v03?!)?
Sent from my U20i using xda app-developers app
Kilroy. said:
Now, this is very interesting, because on my phone, comparing dsp-powered apps with preinstalled equalizer apps is like comparing night with day: I think DSP-Manager makes the sound SO much better, no idea why you don't hear any difference. Hmm...
PS.: Have you tested my Rom with nAa's new kernel (why the heck did he call it v02, when the older version is called v03?!)?
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
Did you try that player and eq settings that i just said?.
Interesting in deed, did you use the same effects with the same values on both techniques? i did that and the result was always the same. If i'm not doing the right eq settings then maybe you could show me the difference by making a screenshot or saying here the effects and the values that you put on your dsp. Remember i only listen to heavy music like rock and rapcore and stuff xD, it's (distorted) sounds, so it must be carefully tweaked, much more careful than any other type of music.
Ps: no i didn't, but i don't think that it's going to do much in performance or sound quality, maybe it just let's you use more options that weren't available. And maybe the name v02 is because he might based the kernel in the older v02 version being an update to that kernel.
AW: JB Music Player
Crazy Seed said:
Did you try that player and eq settings that i just said?.
Interesting in deed, did you use the same effects with the same values on both techniques? i did that and the result was always the same. If i'm not doing the right eq settings then maybe you could show me the difference by making a screenshot or saying here the effects and the values that you put on your dsp. Remember i only listen to heavy music like rock and rapcore and stuff xD, it's (distorted) sounds, so it must be carefully tweaked, much more careful than any other type of music.
Ps: no i didn't, but i don't think that it's going to do much in performance or sound quality, maybe it just let's you use more options that weren't available. And maybe the name v02 is because he might based the kernel in the older v02 version being an update to that kernel.
Click to expand...
Click to collapse
I myself almost only listen to rock, but I like the bass being really powerful . I'll upload a screenshot with my DSP settings soon. One thing I noticed about the different music players: Only the ones where you press the menu button and have the option 'sound effects' or 'equalizer', which gets you to the dsp settings, actually make a difference with dsp. The ones where you don't have that option don't change the sound with dsp. I really would recommend xing to you, okay, the library looks exactly like the stock os player, and it's about double the size, BUT it has much more features and I like the playback style and the sleep timer (and the lockscreen). Also, when you press the menu button, it gives you the chance to go to dsp, which means that It DEFINITLY supports it!
PS.: Sorry, but at the moment I'm on stock rom to test a script I wrote for the guy in the wifi tethering thread. I think I'll reflash this evening and test the player, looks good .
Sent from my U20i using xda app-developers app
Greetings guys!
Today I'm gonna share my VIPER4ANDROID settings for you guys.You can share yours too here in this thread.First of all,you can download the latest version of viper4android,irs,how to install etc on original thread here http://forum.xda-developers.com/showthread.php?t=2191223.All credits go to @zhuhang and all his friends for making such a beautiful app for boosting our music experience.I'm only share settings for our specific devices.
RULES FOR SHARE YOUR SETTINGS
1.Make sure to state your name/type/model of [email protected] etc.
2.ROM that your running.
3.Music player that you use.
4.What settings you share for whether it's for speaker,earphones etc.
5.An appropriate screenshots/post/ etc of your settings for easy and quick refer by other members.
ENJOY!
These are my settings [earphone & headphone](screenshots below)
1.Stock earphones and music player.
2.Running Megafire V8X rom on my GT-I9205.
3.I will upload settings for speaker later.( No for Bluetooth and usb cause I don't use it).You can share if you want.
Hey dear, please tell me the best setting of hi-resolution music... In viper4android.. I m using Nexus5. I have sony earphones xb70ap. Please suggest me for listening hi-resolution seeting in viper4android... Thanks
Resurrection Remix 4.4.2 N7100 Jetaudio and V-Moda Remix Audio earbuds. Can't find a good setting without the bass going crazy. Thanks
Master Power
V4A-FX is powered on
Convolver
Enable
Impulse Response
Dolby Pro Logic II.IRS
Headphone Surround +
Enable
Level 1
Reverberation
Enable
Room Size
25m2
Sound Field
5m
Damping Factor
0 Percent
Wet Signal
0 Percent
Dry Signal
50 Percent
Fidelity Control
Enable ViPER Bass
Select Bass Frequency
60 Hz
Select Bass Boost
6.0 dB
Enable ViPER Clarity
Select Clarity
3.5 dB
Auditory System Protection
Enable
Select Binaural Level
Moderate
There had some time to refine the settings !
cm 13 remix rom mega 5.8 can i use this app sir..??
I have a Note 3 but I'll share anyway
This is for music only, I shut off V4A for movies, dialogue etc. I'm not sure if the Mega has a processor with NEON or not.
Phone: SM-N900A
Headphones: Shure SE215
Music Player: Poweramp 7.03 alpha (note: must sign up for beta program in Play store)
Playback Gain: OFF
FET Compressor: OFF
DDC: OFF (no, I don't use the SE215 entry; it's terrible)
Spectrum Extension: 1.0
Equalizer: OFF
Convolver: BBE Generic Preset 4
Crossover: 10%
Dynamic System: Common Headphones v2
Dynamic Bass: 24%
ViPER Bass: 78 hz; 8.0 dB
ViPER Clarity: XHiFi; 11.0 dB
CureTech+: OFF
AnalogX: OFF
Master Gain: -10.5 dB
Limit Threshhold: 0 dB
These settings probably won't be any good on low quality earbuds. They need all the extra signal processing crap, but too much of that stuff is a hindrance on high quality IEMs.
If anybody here is interested, I have about 750 .irs files I can post a link for y'all to check them out.
Currently using V4A MK-Mod 2.4.0.1(no TWRP)
Equalizer= Vocal Booster
Convolver= Beats Pro+Beats 40%
VHS+= 2
Dynamic System= High End v2 10%
Viper Bass= Natural 78hz at 8db
Viper Clarity= Ozone+ at 8db
Master Gate= 1.6db and 5:5 and 1.0 limit threshold
Currently using some JVC in ear headphones(don't know the model # atm I picked them up for $20 at Walmart not too long ago.
Oh and I'm using PowerAmp 703 alpha through the beta testing part of the play store.
And I'm using a Razr MAXX HD XT926 w/locked bootloader and 4.4.2 Stock Rom 182.46.15
Earphones
Try soundpeats Q12 wireless earphone to enjoy high quality sound.
Hello!
Unleash the audio quality of your Redmi Note 3!
This is a sound mod especially designed for the Redmi Note 3 Pro (kenzo /kate) and its Qualcomm Snapdragon 650 chipset.
It also offers option for enhancing audio via speaker,
It is a hardware level modification that enables the disabled CLS_H_HIFI DAC mode of our chipset that enhances the sound.
The aim of this mod is to offer the ability to take full advantage of the IIR filter implementation offered by Qualcomm audio codecs (WCD93xx). The IIR filters are implemented in hardware as a cascade of five biquads that can be designed independently.
FEATURES :
It enhances the soundstage and just ensures a clean audio to be put-out by the hardware. It increases the dynamic range of bass and treble the device can handle.
It enables HiFi or high performance audio on your smartphone without any hissing sound.
The filters are implemented in hardware and independent of the ROM, kernel, and media playback software used.
It is fully compatible with other audio mods like Ainur audio, ARISE sound, ExtremeBeats, and also Viper, James DSP
The additional impact on battery usage is virtually non-existent
Options for enhancing speaker audio:
HTC 10, which uses the earpiece as a secondary speaker
Stereo, which uses the earpiece as the second speaker to provide true stereo sound from speakers.
INSTALLATION :
1. Download the latest release of shox audio from the drive link attached to the second post.
2. Flash zip in TWRP recovery.
3. Follow the onscreen instructions and select the appropriate options.
4. Feel the shox effect!
Note : You have to reflash the mod after every ROM or kernel update
DOWNLOADS:
Download the latest version of shox audio below:
https://drive.google.com/folderview?id=0B5ratNhH-7mGU3AtTVFmekE4VG8
PS:Tested and working on a kenzo/kate smartphone on all roms.
This mod just enhances the soundstage and just ensures a clean audio to be put-out by the hardware. It increases the dynamic range of bass and treble the device can handle.(heavy equalizer and viper4android users definitely know what I'm talking about)
Link to official viper4android website:
https://vipersaudio.com/blog/
The zip file you download is not a recovery flashable one. It contains the Viper4Android apk. So extract the zip and install the apk.. Please dont complain about it.
Recommended tips:
1)I recommend AGNi kernel by @psndna88, Darkness kernel by @MOVZX or Guyver kernel by @MEGAX91 because it has slimbus overclock which enhances audio quality and my mod on his kernel gives the best audio experience. I have also included patched kernels of other devs also if you need them too..
2)Flash Ainur Sauron audio mod made by @UltraM8 along with this mod for a much better experience.This is currently the best audio mod which is the cleanest..Please thank him for his great work...
Link here: https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
3)Users who need more tweaking to the audio can use Viper4Android.
4)I have included some of the best IRS samples for viper4android(according to me). So try it out if you are using viper4android for complete control over your music. Extract the zip and place the contents in viper4android/kernel directory of your internal storage.(the zip provided is not recovery flashable).
5)People who use MX player for videos can enable SW audio boost which will further increase the sound levels through speakers without any distortions..
It is recommended not to listen through speakers at full volume for longer periods.. Keep the volume low by 1 or 2 steps from the max.
6)People who think that the present max volume through headphones isn't enough can install viper4android and increase output gain to 6dB in master gate..
My personal Viper4Android settings:
Master power - on
Playback gain control - off
FET compressor - off
Viper DDC - on, set to sennheiser hd558
Spectrum extension - on, set to 1.0
Firequalizer - off
Convolver - off
Differential surround, field surround, headphone surround+, reverberation - all set to off
Dynamic system - off
Viper bass - off
Viper clarity - off
Tube sound simulator - off
AnalogX - on, set to extreme
Some other info:
My earphones :
1) Sennheiser cx180 street-II - daily outdoor use.
2) Skullcandy Ink'D - used rarely.
3) Sony MDR-ED12LP - used when I'm at home.
List of smartphones I own right now:
1) Xiaomi Redmi Note 3(kenzo)
2) Samsung Galaxy S(i9000)
3) Xiaomi Redmi Note 4(Mido)
4) Samsung Galaxy Note(n7000)
CHANGELOGS:-
V1 - initial release.
V1.1 - tweaked the values a bit to further remove the hissing noise as reported by @MurdererFight.(thanks bro for being the first tester and reporting me)
V1.2 - added some tweaks which will truly enable HiFi audio through DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or the headphone connected.this ensures proper voltage levels through the amp for the earphones/headphones.
V1.3 - Merged surround audio mod along with hifi audio..
Enjoy stereo-like sound on your kenzo (earpiece speaker also outputs sound now xD, videos feel more alive to watch now).Thanks to @AgentBuBu for the soundmod.
I just merged his mod with mine..
V1.4 - Changed the earpiece thresholds to remove the crackling sound and readjusted both the speaker sound to the same level. Now enjoy stereo like never before on your kenzo's speakers. Thanks to @Androbots for reporting this.Also made the mod universal by making a magisk and SuperSU version..
V1.45 - Readjusted the values again for both earpiece and loudspeaker to remove distortion completely, increased audio volume through headphone jack without disturbing the quality. So, now there's a very little drop in the audio but the quality is absolute eargasm.
v1.5 - Readjusted and increased the volume of both earpiece and speaker without inducing distortions. The sound level is more than stock now.
And further pushed the volume through headphones for louder volume..Now the stereo feel is amazing..
And included biQuads support for headphones for expert users. Now you can correct the frequency response of your beloved cans, IEMs.
Link for biQuads is here:
https://forum.xda-developers.com/showpost.php?p=70194192&postcount=226
v1.6 - This time made sure to keep the audio levels same at the earpiece and loudspeaker to increase the stereo and ambience.
Very little changes to headphone volume again. Removed some unused codes. Its true stereo now. Enjoy the stereo on speakers like never before
v1.7 - Fixed the messed up headphone gain as reported by @AravindhStanley and now has 2 new versions...
1) Stereo Version - The present version which you guys are using..earpiece acts as the left speaker and loudspeaker acts as the right speaker. The speaker volume and earpiece volume is balanced
2) HTC 10 Version - The new one!!!! it is based on the new HTC 10 loudspeaker audio output.. Its mono but still uses earpiece for sound. But here the earpiece acts as a mid range and bass booster and significantly increases the detail of sound heard through speakers. Here, the loudspeaker is louder than the earpiece. The earpiece just adds detail here. So don't complain about unbalanced audio levels as its kept unbalanced.
This version removes all the audio libs to disable audio offloading to the dsp..Now the audio goes straight to the DAC untouched..
So please flash your audio mods once again after flashing the mod to get them back working.
Now biQuads is fixed by the founder @chdloc himself..So its finally working now....
I recommend all the users to try both the version and keep the ones which you like.
The link to new biQuads is here:
https://forum.xda-developers.com/showpost.php?p=70194192&postcount=226
v1.7fix - This is only for HTC 10 version...Many users would have experienced no audio from the loudspeaker after flashing v1.7(it wasn't intended to work like that). This issue has been fixed. Now enjoy audio on both earpiece and loudspeaker. Loudspeaker has louder volume than earpiece as earpiece just acts like a mid range and bass booster like before.. Enjoy the sound now..
v1.8 - Made significant changes to headphone audio....
Now the audio is decoded at 24bit 192khz..but still the output is 16bit 48khz..wait for the Poweramp to fix it or if anyone knows how to edit audioflinger please pm me...if audioflinger is hacked, 24bit 192khz audio can be made systemwide....
And enabled hardware Dolby and DTS-HPX support...
Use any of the sound mod which has support for them...you will feel a difference..
Nothing much changed in speaker audio..
Reflash your audio mods again....dirty flash
v1.9 - Rebased with the stock mixer_paths.XML and edited it from the start again..its much clean and removed useless codes from the file..
Fixed the bug - in-call voice through speakers even though the phone was in earpiece mode as reported by @AravindhStanley
Finally the mod is universal! One flashable zip for all ROMs and kernels so no hustle of magisk or su versions.
Dropped the HTC10 version as I dint see much potential in it..It will be continued only on demand..
Temporarily removed biQuads support as it requires an in-depth inspection..will include it in the next build..
V2.0 - *Fixed low audio volume on headphones as reported by many....
*Introducing a stock version, which only tweaks the headphone audio leaving the speakers untouched(stock config)
*Reincarnated the HTC10 version as requested by @mahmoudthassan
V2.1 - *added bass filter for earpiece in both htc10 and stereo version to protect the speaker..
*added a bass filter for headphones also to improve bass range which also reduces distortion..
*created an uninstaller for the mod..
V2.2 - *renamed the mod from HI-FI AUDIO PATCH to shox Audio Mod.
*finally implemented biQuads and added my sound signature to the headphone audio output.
*increased the amp volume to 16 to increase output volume.
*included patched kernels which disable audio codec power gating also for the mod as it is mandatory.
V2.3 -
*Finally integrated aroma installer to the mod which contains all the version in one zip file.
*added high impedance version enabled compander which maxes out the amp gain to default 20 for higher impedance earphones (greater than 32ohm) along with the default one which keeps compander off and amp gain to 16
*enabled CLS_H_LP mode for all other audio streams except headphones(this is always CLS_H_HIFI, its the reason this audio mod was made lol) in order to save power while playing audio through speakers.
*removed high pass filter at 150hz for htc10 variant which was present in v2.2 to enhance music experience.
V2.4 -
*fixed installation script bugs as the wrong versions were getting installed which were different from the selected one.
*built on a newer aroma base borrowed from darkness kernel private build.(thanks to @MOVZX) and made the installer simple and effective. Surp
*reverted CLS_H_LP HPH Mode for speakers and earpiece stream because of audio issues. Its always CLS_H_HIFI for all streams.
*disabled compander for high impedance (greater than 16ohms)mixer paths as I felt that it caused a loss in treble and highs.
*implemented biQuads for loudspeaker in stereo version to make thr sound match with earpiece. Now both the speakers output nice and detailed music.
V2.5 -
*made many changes to aroma installer.
*added everything to the aroma installer. Now you can install and uninstall the mod from a single aroma zip itself.
*changed the aroma theme from ICS to HTC.
*best part - added DPG patch to the aroma installer itself. From now there's no need of flashing DPG version of the kernels. Just select yes for patch cmdline disable power gating and the anykernel2 script patches the kernel to work with shox Audio(thanks to @osm0sis and @scrubjay55).
V2.6 -
*added some hardware eq presets using biQuads based on 5-band parametric EQ from neutron music player.
*there are currently 7 presets including the shox signature -
1)shox(default)
2)Acoustic
3)Rock
4)Pop
5)Bass
6)Treble
7)Middle
*these eq presets does not depend on any app and works for all headphone streams.
*removed OTA survival as the users have to flash shox again anyway to patch cmdline after they update a ROM. So removed it as it is kinda useless.
*updated the in-built cmdline patch script which dynamically detects the present cmdline and adds DPG patch lines only when it is not present in cmdline. So no more confusion of patching DPG for any kernel from now on.
*rebased on new dark material AROMA theme borrowed from Zetsubou kernel(thanks to @Ashish94).
V2.65 -
*made minor changes to the anykernel script which now properly patched the cmdline without breaking the selinux for some users.
V3.0 -
*added flat eq.
*added neutral eq
*added Oreo support
*audiophile mode.
*speaker privacy mode.
*speaker boost mode.(needs to be fixed. Doesn't work yet)
*new flash script written from scratch.(added commands as writing from scratch would be a nightmare)
Guide to create your own biQuads:
This is a guide for creating your own biQuads which replaces the existing ones in the mod.
As you all know, biQuads is a set of 5 IIR filters which can be used to enhance the music and also correct the frequency response of the headphones/earphones which you use.
Continue from here only if you know what sampling rate, bit width, lowpass, highpass, peak filters mean. Otherwise google those terms and learn what they are and what they do
So here's how to design your own biQuads and listen the music in your way:
1) Download biQuads flashable zip from the XDA thread here:
https://forum.xda-developers.com/android/software/reference-qualcomm-audio-codec-iir-t3093000
Thank @chdloc for this great work.
2) Flash the zip in recovery and reboot.
3) You will see an app named biQuads in the apps drawer.
4) Open the app and give it root access.
5)As I told earlier, there are biQuads numbering from 1 to 5
6)After every filter you create for every number, tap design biQuad and wait for 20-30sec. You will be redirected to another window where the app check whether the filter is designed correctly or not with a spectrum graph. After that, increase the biQuad number
7) Do the same step 6 again and again from 1 to 5 until your biQuads is ready.
8)Finally, select review filter where you get a final graph and parameters of different IIR filters.
9)Then select save and give your biQuads a name(make sure there are no spaces included in the name). Click accept and the file gets saved in /sdcard with the filename you specified.
10)Open the *.coeffs from /sdcard where * is the name you specified for the biQuads in a text editor.
11) Replace IIR2 with IIR0 wherever found and change INP1 to INP2 wherever found.
12) Finally copy everything from the file and replace the contents in the mixer paths(present in /system/etc) under path name headphones. You will find similar lines there which are my biQuads already implemented.(make sure that you file editor has root access)
13) Replace those lines perfectly and align the lines as they were. Save the file when you are done and reboot.
14) Magic.
Hi , I'm using NOS stable with stock kernel & already have Dolby Atmos installed . What's the use of this mod ? HiFi DAC enhances sound output via headphone jack right ...
Sent from my Redmi Note 3 using Tapatalk
Hey ppl!
If you guys are interested in audio modding or want to know about audio mods and audio in-depth, you can join this telegram group. Believe me, you won't be disappointed.
Link here:
https://telegram.me/joinchat/DXdmNERAlSzg1U--tujB5A
Here's the link for shox testers group:
https://t.me/joinchat/Ggq39kJnNrotMMi2zbKyqw
Make sure that you join here if you have some suggestions or wanna test the latest releases of shox audio.
VaibhavKumar07 said:
Hi , I'm using NOS stable with stock kernel & already have Dolby Atmos installed . What's the use of this mod ? HiFi DAC enhances sound output via headphone jack right ...
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
You are right..
This globally changes the experience as this enhances audio at a hardware-level instead of Dolby which enhances at a software level.
Please try this and inform me about your new audio experience.
ScreaMySkrillEX
Please thank me guys if this works for you all.and don't forget to vote in the poll....
For me there is no audio output anymore. AOSIP 5.8 and Infected
EDIT: Flashed the zip and now it's working but hissing sound is still there
MurdererFight said:
For me there is no audio output anymore. AOSIP 5.8 and Infected
EDIT: Flashed the zip and now it's working but hissing sound is still there
Click to expand...
Click to collapse
Thanks for using this..
And thank you for your reply.
Can you tell me which kernel are you using??
Important note: don't change the headphone gain values in kernel adiutor or ex kernel manager let it be the default one..
Sorry dude..
I didnt read your post correctly..
You are on infected kernel..
Has the hissing sound increased or decreased after flashing this??
ScreaMySkrillEX said:
Sorry dude..
I didnt read your post correctly..
You are on infected kernel..
Has the hissing sound increased or decreased after flashing this??
Click to expand...
Click to collapse
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
MurdererFight said:
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
Click to expand...
Click to collapse
No bro..
@flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
MurdererFight said:
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
Click to expand...
Click to collapse
No bro..
@flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
Here's an update
Try flashing this for more noise removal..
ScreaMySkrillEX said:
No bro..
@flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
Here's an update
Try flashing this for more noise removal..
Click to expand...
Click to collapse
Reduced a but more, still perceptible but it's because of V4Arise. Thanks for the update
MurdererFight said:
Reduced a but more, still perceptible but it's because of V4Arise. Thanks for the update
Click to expand...
Click to collapse
OK. I recommend you to use viper4android standalone apk without arise sound mod as it clogs the audio by adding noise to the soundstage.
Thank you
ScreaMySkrillEX
Appreciate the credit man, thanks!
ZeroInfinity said:
Appreciate the credit man, thanks!
Click to expand...
Click to collapse
You are really the god of android audio modding
I firstly appreciate you for your great work..
Please keep your great work going..
V1.2 is up!!
Changes:
Added some tweaks which will truly enable HiFi audio through the DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or headphone connected.this ensure proper voltage levels through the amp for the earphone/headphone.
Enjoy more subtle and richful audio..
ScreaMySkrillEX
ScreaMySkrillEX said:
V1.2 is up!!
Changes:
Added some tweaks which will truly enable HiFi audio through the DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or headphone connected.this ensure proper voltage levels through the amp for the earphone/headphone.
Enjoy more subtle and richful audio..
ScreaMySkrillEX
Click to expand...
Click to collapse
Wanna try this..
I'm having Nitrogen OS 7.1.2 Stock Kernel, Zcx TWRP with SuperSU installed (Not Magisk),
Arise Dolby ATMOS,
VIPER4ARISE.
Can I use this with Arise Mod?
Ajendra25 said:
Wanna try this..
I'm having Nitrogen OS 7.1.2 Stock Kernel, Zcx TWRP with SuperSU installed (Not Magisk),
Arise Dolby ATMOS,
VIPER4ARISE.
Can I use this with Arise Mod?
Click to expand...
Click to collapse
Yeah! Sure you can..
Try it and tell me..
Please vote the poll..