can some one help me im brick my fone windows only detected qhsusb_dload it a hard brick
i flash my fone witch odin I9205XXUCML1 but i separete the file i not include the aboot.mbn i sucses to boot but when restart my fone is death any one have a solusion fo it
thank in advance
1. If your phone only detected QHSUSB_DLOAD follow this guide.
2.1. Download Win32DiskImager
2.2 Download debrik.img thank to @ValenteL for the file.
2.3 Unzip both items and run win32diskimager
2.4 Select Image File debrick.img
2.5 Select Device ( put your sdcard in 16gb or 32bg )
2.6 Click write ( note this will format your sdcard plz backup your data )
2.7 After finish put your sdcard to your phone. you will se a magical your phone will boot.
3.1 After it boot turn off the phone and go to download mod.
3.2 Open odin and flash the stock frameware ( i flash I9205XXUCML1 )
4. After boot go to setting, more storage and format your sdcard
Now your phone back to normal
thank to
@ValenteL for provide the debrick.img
@KAsp3rd for the guide
i found this
[HOWTO] UnBrick T-Mobile S III QHSUSB_DLOAD w/Video Walkthrough
but where can i found debrick image.
shazzl said:
i found this
[HOWTO] UnBrick T-Mobile S III QHSUSB_DLOAD w/Video Walkthrough
but where can i found debrick image.
Click to expand...
Click to collapse
can any one help me witch this http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
i relly need this
@ ValenteL plz help me
I'm sorry. I've soft bricked my 9205 after installing the new Rom with Knox. I just I put it back on it with Odin twice.
I canot boot into download mod or cwm
Can any one download and flash debrick img and send me the brick img if working i will report if
You arrive to charge the battery until 100 %?
Power + Vol-down not go to Download Mode?
You want a debrick img for make what? Your Mega start? You go to Recovery? The Windows/Pc known it?
I must see many things to be if can help You.
BTW, the bootloader isn't only aboot.mbn but:
aboot.mbn
rpm.mbn
sbl1.mbn
sbl2.mbn
sbl3.mbn
tz.mbn
It my mis take.... can you help me... to flash the brick img and upload the the brick.img
Here it is the debrick.img inside one folder:
https://meocloud.pt/link/686db37c-3f14-4f6e-bf83-b7f69e9da9a7/debrick.img.tar/
Give me feed back from Your try.
Good luck
Thank you hope fully myfone will recover
shazzl said:
Thank you hope fully myfone will recover
Click to expand...
Click to collapse
Well, I'm happy for that :good:
Based on Your case I made this Thread: http://forum.xda-developers.com/showthread.php?t=2600976
I also open a treat at develop
Sent from my GT-I9205 using xda app-developers app
download debrick.img
I cant use the download link for the derbick.img
my mega is hard bricked caused by a root app to change boot animations, after activating the optional boot animations i`ve shutdown my galaxy mega..since that the display is fully black download mode doesnt work, jig doesnt work it doesnt even load the battery !
i`m not a expert at pc but i think if i get a working link for the debrick.img i could fix my galaxy mega !
Thank you
quaerere said:
I cant use the download link for the derbick.img
my mega is hard bricked caused by a root app to change boot animations, after activating the optional boot animations i`ve shutdown my galaxy mega..since that the display is fully black download mode doesnt work, jig doesnt work it doesnt even load the battery !
i`m not a expert at pc but i think if i get a working link for the debrick.img i could fix my galaxy mega !
Thank you
Click to expand...
Click to collapse
if you connect your pc did QHSUSB_DLOAD show up
shazzl said:
if you connect your pc did QHSUSB_DLOAD show up
Click to expand...
Click to collapse
yes! i cant use odin to flash new firmware because the mega doesnt react to anything
quaerere said:
yes! i cant use odin to flash new firmware because the mega doesnt react to anything
Click to expand...
Click to collapse
U are luck im stuck for 1 weak to fine the solutions....
Thank to @ValenteL fo giving me the debrick.img
What firmware do you flash....
Sent from my GT-I9205 using xda app-developers app
after ive put in the sd card the galaxy mega doenst leave the starting mode so just the galaxy mega label appears und changes its colors ...
i got into download mode and flashed my rom but it doenst start righly just the changing colors and after them a black lightet screen.
what can i do now?
when starting two red lines appear and one green saying: "set waranty bit: kernel"
quaerere said:
after ive put in the sd card the galaxy mega doenst leave the starting mode so just the galaxy mega label appears und changes its colors ...
i got into download mode and flashed my rom but it doenst start righly just the changing colors and after them a black lightet screen.
what can i do now?
when starting two red lines appear and one green saying: "set waranty bit: kernel"
Click to expand...
Click to collapse
What firmware baseband do you used CML1...
Sent from my GT-I9205 using xda app-developers app
what is cml1? firmware is stock .. dont know what to do now
---------- Post added at 03:19 PM ---------- Previous post was at 02:49 PM ----------
now the start screen appears and says in one red line "secure fail: kernel"
even if its just loading this red line appears
Download the link that I pm you.
Flash using odin... do you now how to use odin??
Sent from my GT-I9205 using xda app-developers app
Related
iam using galaxy s2 i9100g when i was trying to do flash using odin i download firmware from sammobile and extract the files and two files come up .pit file and pda ...and then i open odin and select both files and start flashing and odin pushes message failed ...and my phone is not going into download mode and recovery mode and pushed message "firmware upgrade encountered an issue"....iam so panic and confused how to fix this problem somewhere i read to fix problem using kies emergency recovery but it didnt work for me and asking me source code and i dont know ...iam hopeless and very terrified ,,,pls guys help me to fix my problem i shall be very thankful for yoy for that ...
humzagr8 said:
iam using galaxy s2 i9100g when i was trying to do flash using odin i download firmware from sammobile and extract the files and two files come up .pit file and pda ...and then i open odin and select both files and start flashing and odin pushes message failed ...and my phone is not going into download mode and recovery mode and pushed message "firmware upgrade encountered an issue"....iam so panic and confused how to fix this problem somewhere i read to fix problem using kies emergency recovery but it didnt work for me and asking me source code and i dont know ...iam hopeless and very terrified ,,,pls guys help me to fix my problem i shall be very thankful for yoy for that ...
Click to expand...
Click to collapse
u need not flash pit for upgradin ur rom using odin
pit is used incase of corrupton and for recovery
... try gettin into download mode
if u cant get into download
buy a usb jig from ebay it will take u to download mode
once u in download mode flash only ur rom ...
and chk
u can also make a usb jig
youtube it u can fin videos to do it
neerajganga said:
u need not flash pit for upgradin ur rom using odin
pit is used incase of corrupton and for recovery
... try gettin into download mode
if u cant get into download
buy a usb jig from ebay it will take u to download mode
once u in download mode flash only ur rom ...
and chk
u can also make a usb jig
youtube it u can fin videos to do it
Click to expand...
Click to collapse
You should try to go into recovery mode. From there, try to factory reset
Sent from my GT-I9100 using Tapatalk 2
is there any more ways to enter recovery mode from "firmware upgrade encountered an issue galaxy s2" iam so dead ....and i dont have money to buy usb jig now so help me !!!
humzagr8 said:
is there any more ways to enter recovery mode from "firmware upgrade encountered an issue galaxy s2" iam so dead ....and i dont have money to buy usb jig now so help me !!!
Click to expand...
Click to collapse
well it cost hardly a $ or 2
if u cant
then try lending 1 search some 1 near ur place here
http://forum.xda-developers.com/showthread.php?t=1495867&page=35
or make a usb jig urself .
Some one reported this:
Plug a standard usb cable while pressing vol down. It will enter download mode. Not tested by me, but you loose nothing to try and tell us if it works
Sent from my GT-I9100 using Tapatalk 2
omg thanks so much i managed to get in to download mode
How to solve that
I have an S2 Hercules T989... I tried upgrading it from 2.3.6 to 4.0 but when I flashed with Odin 3.18 it gave me that error message.
I have tried four or five times reflashing it, rebooting to download mode but still it stayed like that for 1 1/2 hours...
So, I got to visit another site, I couldnt remember that actually, but it talked about on how to upgrade S3 to latest version.
There, I downloaded the latest version of Odin, too, that's v4 I think, and when I tried again (first time with that version), it worked!
You don't need to actually redownload the file, but instead, try other odin versions, recommended to download and use the latest one coz it will be the safest way to upgrade your galaxy device. Hope this helps.
Hi to all,
I have an i9300 Galaxy S3 it is dead when I wanna enter to recovery mode but it doesn't enter, but it enters to downloading mode but it does not show GT-I9300 in front of Product Name .
and I can't flash it with Odin downloader.
please have a look to these images
U did not post any images.
Btw when u try to enter in recovery disconnect your phone from the pc/laptop. I had problems entering recovery when it was connected to my laptop.
aminrezaya said:
Hi to all,
I have an i9300 Galaxy S3 it is dead when I wanna enter to recovery mode but it doesn't enter, but it enters to downloading mode but it does not show GT-I9300 in front of Product Name .
and I can't flash it with Odin downloader.
please have a look to these images
Click to expand...
Click to collapse
If it enters download mode, flash a stock samsung rom using Odin.. Once it enters download mode press the Volume up button to continue and then connect your phone to Pc while odin is running
aminrezaya said:
Hi to all,
I have an i9300 Galaxy S3 it is dead when I wanna enter to recovery mode but it doesn't enter, but it enters to downloading mode but it does not show GT-I9300 in front of Product Name .
and I can't flash it with Odin downloader.
please have a look to these images
Click to expand...
Click to collapse
You have Sudden Death Syndrome probably since the product name is blank. You need a new motherboard.
the same happened to me, but i have a product name, it happend after updating to 4.2.1 by Samsung WanamLite, please help
factory reset
Odin can't falsh it I tried with SPT box but not succed.
It doesn't enter to recovery mode for factory reset
Have you tried flashing a recovery with Odin?
Yes I tried but Odin can't flash it
aminrezaya said:
Yes I tried but Odin can't flash it
Click to expand...
Click to collapse
Had the same exact problem. Sudden Death Syndrome... took it back to Samsung who replaced the motherboard. I got it back the next day.
better u go in nearest samsung shop to check ur device..
Sent from my GT-I8150 using XDA Premium HD app
I bought it from another country
There is no Samsung shop to change or repair it please help me
Ok, can we have some clear details ?
Was the phone in this state when you bought it?
If not, what did you do prior to the problem occurring?
Are you sure it is an i9300?
What does up when you go to settings/about phone?
so u need to buy a new phone.. bcoz u have no product name in ur device when u entering download mode..
Sent from my GT-I8150 using XDA Premium HD app
just to clarify when you really get SDS you cant even get to any screen, the phone does not respond to any button or wire.
it is just dead, no recovery, no download.
i know cos i had it, but i am now on a sds immune mobo
exge said:
just to clarify when you really get SDS you cant even get to any screen, the phone does not respond to any button or wire.
it is just dead, no recovery, no download.
i know cos i had it, but i am now on a sds immune mobo
Click to expand...
Click to collapse
Not true. Most people with SDS can get into Download mode only, but flashing anything doesn't work. The product name comes up blank and the Firmware shows CUSTOM no matter what, because it can't find the stock Samsung ROM, even if you've never rooted your device.
Be careful because a lot of people have been denied by service centers who claim they rooted their device because it says CUSTOM, but assert that you don't even know what that is (root). If the service center tells Samsung, Samsung can't go against their word. This is from other people's experience on here that I've read. They'll charge you $350 to replace the motherboard, so make sure it's clear.
http://www.mediafire.com/?xrn045px42pbyso
U need to flash firmware with odin. i know u already tried it but try from this way which i m showing u.
first browse pit file then bootloader, pda, phone and csc files too. then u will see flashing will start u need all files.
DjamelGsm said:
http://www.mediafire.com/?xrn045px42pbyso
Click to expand...
Click to collapse
This video better be showing how to replace the eMMC or the motherboard otherwise "coming soon" is rubbish and lies.
---------- Post added at 12:05 PM ---------- Previous post was at 12:04 PM ----------
exynoss said:
U need to flash firmware with odin. i know u already tried it but try from this way which i m showing u.
first browse pit file then bootloader, pda, phone and csc files too. then u will see flashing will start u need all files.
Click to expand...
Click to collapse
Won't help in the case of SDS
rootSU said:
This video better be showing how to replace the eMMC or the motherboard otherwise "coming soon" is rubbish and lies.
---------- Post added at 12:05 PM ---------- Previous post was at 12:04 PM ----------
Click to expand...
Click to collapse
:laugh:
http://www.dzgsm.com/vb/threads/9232-GT-I9300-Galaxy-S3-إصلاح-عيب-product-vide?p=52896#post52896
Hi everyone.
i own a international samsung s3 gt-i9300T
i noticed it behaving strangly as apps where locking up and then it would restart in the middle of web surfing etc
last night i restarted it and now it has frozen in ODIN MODE and states DOWNLOADING-DO NOT TURN OFF TARGET...
Its been on this page for hrs..
i have a custom Hyperlight rom installed.
Any suggestions would be greatly appreciated.
thankyou.
john
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
it's already in download. read the instructions on installing a stock rom
Oomahey said:
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
hi
srry fr the late reply but it freezes on the samsung galaxy s 3 gt i9300t screenafter it reboots
im totally lost im about to dump the phone in the garbage and get another one tomorro
ive also tried using odin again but it just stalls for hrs when trying to reinstal flash another rom
thnx heaps for ur advise
Glebun said:
it's already in download. read the instructions on installing a stock rom
Click to expand...
Click to collapse
thnks buddy but when i hold the power button it does what i explained in the above reply when i hold power vol down and home the warning screen comes up informing me that a custom rom can cause critical problems etc so when i press down to cancel it goes back to the previously mentioned screen but when i press up to install rom it goes into odin mode with the android robot with
product name blank (previosly it stated gt i9300t)
custom binary download no (previously stated4)
current binary samsung official (said something different before)
system settings custom
i swear this is doing my head in :0
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
JJEgan said:
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
Click to expand...
Click to collapse
hi im using the latest odin file odin3 v1.85 and is this the right firmware file to use as i used this to root my s3 CF Root-SGS3-v6.4.tar
when i do it it says
<ID:0/005> "cant open the serial (com) port.
<OSM> All threads completed (succeeded 0/ failed 1)
if the product name is empty in download, then it's time to get a new phone. it's SDS
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
thanks matey
so in other words my phone is bricked :0
by the way what does sds stand for ???
anyway thnx again
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
hi again
i tried it again and now it says there is no pit partition ???
who wants a samsung s3 brick b4 it goes into the trash ???
antway thnx buddy this rooting is not fr me :0
Put it on ebay just say what the problem is .
Someone who reads your post will come to the conclusion its just a user who has not followed the instructions annd may think its worth a cheap buy .
Odin is not firmware CF Root is not firmware .
jje
Make sure that uve downloaded the correct CF-Root file (for i9300T and NOT i9300)... I think its nothing to do with SDS... Anyway try the following link and download the package again...
http://www.androidegis.com/how-to/how-to-root-galaxy-s3-i9300t-with-cf-root-tool/
Hope it works....
Sent from my GT-I9300 (Hassan Khalid Malik) using xda premium
Hey folks ,
My new mega got bricked overnight under mysterious circumstances. It was not rooted , no custom recovery no tampering whatsoever. Somehow , overnight , while the phone was still on it shut off apparently and the next morning it was not responsive. In the device manager it shows QHSUSB_DLOAD. This ain't samsung , i presumed. Apparently this is the signal of the hardbrick. I found some debrick methods specifically the one that should include a pit file from my rom. I can't find any debrick.img compatible. I've been all over the internet.
I need a debrick.img from the stock 4.4.2 kitkat rom.
I followed the link below and flashed the debrick image to my external sd and checked with disk part , the partitions are there on the extsd but i think it's not compatible with either my rom or the fact that it's a i19205 image for it doesn't boot. I need a i9200 kitkat debrick image following the same method to try it out.
The link ;
http://forum.xda-developers.com/showthread.php?t=2591176
Thanks in advance.
boltthrower56 said:
Hey folks ,
My new mega got bricked overnight under mysterious circumstances. It was not rooted , no custom recovery no tampering whatsoever. Somehow , overnight , while the phone was still on it shut off apparently and the next morning it was not responsive. In the device manager it shows QHSUSB_DLOAD. This ain't samsung , i presumed. Apparently this is the signal of the hardbrick. I found some debrick methods specifically the one that should include a pit file from my rom. I can't find any debrick.img compatible. I've been all over the internet.
I need a debrick.img from the stock 4.4.2 kitkat rom.
I followed the link below and flashed the debrick image to my external sd and checked with disk part , the partitions are there on the extsd but i think it's not compatible with either my rom or the fact that it's a i19205 image for it doesn't boot. I need a i9200 kitkat debrick image following the same method to try it out.
The link ;
http://forum.xda-developers.com/showthread.php?t=2591176
Thanks in advance.
Click to expand...
Click to collapse
Nobody ? Come on!
Sent from my Nexus 4 using XDA Free mobile app
boltthrower56 said:
Nobody ? Come on!
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Can you get into Download Mode?
Sent from my GT-I9205 using Tapatalk
AndroidSlave said:
Can you get into Download Mode?
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
I'm having the same problem - i9200 not rooted.. stuck on logo... I can't "see" the download mode (the screen stays black) but I can get to it by following the steps (power, v-down, home then pressing up) Odin recogizes it and I downloaded a firmware.. then odin said I needed a pit file.. so I downloaded that from here for the i9200... now I amd getting re-partition operation failed... I have tried all my usb ports and 3 different cords, I have tried with the internet off, kies uninstalled, and the battery in/out... I don't know what else to do.. I've been messing with this for 2 days - 15+ hours I am seriously about to go insane!! Any new ideas or thought on what I am doing wrong?
Sorry folks , i forgot about this thread.
Apparently , there is a common problem with i9200. The soc can free some of it's connections from the board. Which is what caused my brick on this instance. We diagnosed this with a friend who has a riff box. Jtag failed. We figured something must be wrong. It was the soc. I had the SoC reballed by a professional. Since then it boots fine.
Hi Guys
Sorry For My English ...
my phone hard bricked and it's not open
i follow one of threads here .. and i download the debrick.img for i9205 because i cannot make it
and flashed it in micro sd and my phone open samsung galaxy mega logo with green writing top left Set Warranty Bit : kernel
and 2 lines red and restart, only doing this
and i can access download mode but i cannot accses recovery mode
I tried reflashing stock rom with ODIN, I got the PASSED green message , but the phone still stuck on boot loop.
and i install twrp and cwm recovery but my recovery doesn't open
and when i remove the micro sd my phone it's not open .. and when i put it my phone open
Please help I can't use the phone at all.
debrick.img
Hi man, I have the same exact problem. Except, I didn't have access to the debrick.img yet. Can you share it with me? Thanks in advance!
saddah said:
Hi Guys
i follow one of threads here .. and i downloaded the debrick.img for i9205 because i cannot make it
(
Click to expand...
Click to collapse
debrick.img
JoooostB said:
Hi man, I have the same exact problem. Except, I didn't have access to the debrick.img yet. Can you share it with me? Thanks in advance!
Click to expand...
Click to collapse
the debrick.img here
http://www.mediafire.com/download/32x34l6secb6zc2/debrick.img
and follow the steps here
http://forum.xda-developers.com/showthread.php?t=2591176