[Q] Encryption Problems - AT&T LG Optimus G

I encrypted my LG Optimus g E970 using the option in cyanogenmod under security. It prompted me for a pin using a keypad, and I carefully entered a 4 digit pin. At the end of the encryption process, it rebooted and promted me with "Enter password to decrypt storage." Instead of a pin, there was a text box and full android keyboard. I entered my pin, and it said "Try Again." It did not lock me out at all for any amount of time no matter how many passwords I tried. I tried rebooting it, and had the same problem. If I leave the device on without typing in a password, it makes a clicking sound after a minute or so every ten seconds. I can't factory reset in TWRP because it can't mount /data. What should I do?

Set the phone back to factory mode by LGNPSTing it. I had a similar problem with stock rom. Had to lgnpst it as recovery didnt helped flash new roms.
Sent from my LG-E970 using Tapatalk

me2
IamAto22 said:
I encrypted my LG Optimus g E970 using the option in cyanogenmod under security. It prompted me for a pin using a keypad, and I carefully entered a 4 digit pin. At the end of the encryption process, it rebooted and promted me with "Enter password to decrypt storage." Instead of a pin, there was a text box and full android keyboard. I entered my pin, and it said "Try Again." It did not lock me out at all for any amount of time no matter how many passwords I tried. I tried rebooting it, and had the same problem. If I leave the device on without typing in a password, it makes a clicking sound after a minute or so every ten seconds. I can't factory reset in TWRP because it can't mount /data. What should I do?
Click to expand...
Click to collapse
Did you ever get encryption working? I've been unable to encrypt my /data partition with the following ROMs:
BeanStalk-4.4.205-20140103-geeb
carbon_geeb-2014-01-04
cm-10.2.0-e970
cm-11-20140104-SNAPSHOT-M2-e970
purity_geeb_ota_2014-01-05
However, I am able to get it working with the stock AT&T image (ATT-Stock-E97020j).
The symptoms are the same: appears to encrypt correctly, however the pin doesn't work.

Related

[E977] Wrong password to decrypt

Guys need help from you guys!
I have a LG Optimus G (E977), I was trying to sync my email (exchange) on PAC-MAC rom (4.3), and asked me to perform the encryption, I selected yes and put my PIN.
The phone rebooted normally and started to encrypt, appeared with the option for me to put in the password, and the phone was saying that the password was wrong.
I went into recovery, formatted all data (data, cache, system) and performed the restoration by LG Support Tool, but it still keeps asking me the password to decrypt the phone.
Currently I can not access neither fastboot nor recovery, he also realizes not reset after several attempts with the wrong password.

[Q] Decryption password not working

I encrypted my LG Optimus G E970 using the option in cyanogenmod under security. It prompted me for a pin using a keypad, and I carefully entered a 4 digit pin. At the end of the encryption process, it rebooted and promted me with "Enter password to decrypt storage." Instead of a pin, there was a text box and full android keyboard. I entered my pin, and it said "Try Again." It did not lock me out at all for any amount of time no matter how many passwords I tried. I tried rebooting it, and had the same problem. If I leave the device on without typing in a password, it makes a clicking sound after a minute or so every ten seconds. I can't factory reset in TWRP because it can't mount /data. What should I do?
Hey i'm having the same problem, just got the same phone (LG optimus G e970) 3 weeks ago cause i signed a new 2 year contract, got it rooted and then tried to encrypt and it's not letting me in even though i'm sure the PW is right. someone told me LGNPST might work and i tried doing the steps and it was no good. Anyone have any way of remedying this problem? I have ATT and if all else fails i'll just return to the store to get the encryption off but will they give me any flack if they know it's been rooted? Thanks

[Q] Enter recovery password?

So my daughter got a hold of my phone. "I think" she tried entering the password too many times. Now phone just displays:
Just my Background Picture and this message below.
"To unlock, enter recovery password"
______________________________
Under this message is a Emergency Call button.
I tried my phone password, google password, and Outlook password. All not working. After entering my password, and it is incorrect I get this message:
"You have incorrectly attempted to unlock the phone 1 times. The phone will now be reset to factory default" OK button. (DONT CLICK OK, Just restart phone by holding down power button)
I then just power off and restart. After restart -> Samsung logo -> Verizon logo, it goes back to the "To unlock, enter the recovery password" screen.
Don't want to go to factory default, Any help or suggestions???
Verizon Samsung S3
Verizon just pushed out the KitKat update to my phone last month.
NOT rooted, just stock Verizon ROM.
I can call this cell. I still works. But can't get to regular unlock screen. Always just goes to this Recovery password screen.
Do a hard reset.. no another way
Really... Is there no Default "recovery password". I don't remember setting one up. Any Google work around? I tried searching online, and I don't see anything about this "Recovery Password"... Is this new or do people just not get to this screen?
Well, if there is any Odin-flashable recovery for your phone, you can flash it and then pull important data using ADB. You can also take a Nandroid backup and then use Nandroid Manager to see if you can recover any more data from the ROM.
This will void your warranty.
Bingo... So if anyone is still having this issue, you DON'T have to do a factory reset. I finally solved it (at least it worked for me). Here's how I did it. You need a Google account setup already for this phone. Go to: wwwgooglecom/android/devicemanager (add dots, come on xda, I'm not a newbie -> join in 2009) I tried to Locate and I tried to Ring, they both worked, but you need to do this -> Click the LOCK icon. Then it will try to find your phone. If it does find it, it will ask for a NEW password to "LOCK" your phone. After entering your password, your phone will "LOCK" itself. (Even though it has been locked out already) Once that is done, I went back to my phone and try entering this "new" password I setup in the: recovery password location. It works. Good luck...
Not sure how to mark this Thread as Solved...
Bloody Legend!!
You wanted to say thanks mate.
My S5 has presented me with this screen twice, in the past week! The first time it wiped my phone (and SD card).
Happy New Year!!!
J.
Going to wwwgooglecom/android/devicemanager doesn't work anymore. Now when you try that process, you will get a pop-up saying that the device is already locked and the new password you put in will not be used. You are still required to put in the old Recovery Password. I have wiped the phone and tried to find where one would put in a recovery password and cannot find it.
I contacted Samsung and they told me to use their system. Go to findmymobile(dot)samsung(dot)com and log in (assuming you registered). I logged in, went through the process to unlock my phone. I could see the notification that the unlock was successful, but the lock is still in effect. Samsung support said I would have no other option than to wipe the phone again. I asked how I could get support for the Android lock that was in effect, and they referred me to support(dot)google(dot)com. If you go there, and work your way through the menu, you find that the manufacturer of the phone is supposed to handle Android OS support.
So Samsung has added a proprietary remote unlocking feature, but somehow forgotten to disable the built-in one. Since they have that extra "feature" they won't support the default one.

Invalid/lost PIN for secure startup/ask PIN on boot screen

Hoping someone can help because my phone is completely unusable. I was in work yesterday and decided to restart my phone because the battery was draining and I didn't have a USB-C cable. It got to the "enter PIN" screen, and the PIN I've always used was invalid. I'm pretty sure I never changed my PIN, but I've used 15 of 30 guesses trying any number that I might have changed it to, and none work. I usually unlock my phone with my finger print, but that isn't possible because this isn't the standard unlock screen, it's the screen before the phone even fully boots up. It's not connected to the internet yet so I can't reset it via Google and there's no "forgot PIN" option.
To further complicate things, the power button on my phone doesn't work (though the finger print sensor still does.) The phone was in my pocket and got moist from sweat on a hot day, and hasn't worked since. So I'm not even able to get into recovery mode. I can turn the phone on by holding volume-down and connecting then disconnecting the charger. I can also get into "download mode" to flash firmware by doing the same thing holding volume-up.
I have my camera photos backed up, but nothing in my downloads directory is saved, nor any pictures received in text messages. I'm sure there's plenty of other stuff that's not backed up too. I hadn't enabled encryption. Is there any way to transfer files off my phone? I'm assuming no, especially since even "adb" doesn't see the phone in either download mode or the PIN entry screen. USB debugging was enabled, but it seems like it's only connecting in "charge only" mode.
I'm not even sure how to get the phone working again, even if I have to wipe it. Should I try flashing a stock ROM (it's not rooted or un-bootlocked)? What happens when I enter the invalid PIN 30 times?
Thanks for any help.
Edit: If it helps, it's the AT&T model, H820
think you must reflash the Rom with fatory reset option. not the best, but you have a usable devive again. Bad you cant root the device and delete just the two *.key files
gesendet von meinem LG G5 H850 V10E
What happens after 30th attempt to unlock Secure Boot?
I have forgotten the unlock pattern for my G5, which has been sitting in a drawer for the last couple of months.
What happens when I fail to correctly enter the unlock pattern for the 30th time? Will it clear the data and reset itself, if so, no biggy, or will it turn itself into a brick, which would be a biggy?
Regards,
SpudULike said:
I have forgotten the unlock pattern for my G5, which has been sitting in a drawer for the last couple of months.
What happens when I fail to correctly enter the unlock pattern for the 30th time? Will it clear the data and reset itself, if so, no biggy, or will it turn itself into a brick, which would be a biggy?
Regards,
Click to expand...
Click to collapse
It clears all data and factory resets itself. The only other thing is that you need the password for the Google account it was associated with, in order to use it after it resets. I think it's to prevent phone theft. I remember hearing you shouldn't try to change your Google password within ~3 days of resetting the device either, because it might not work.
Note that if it's the actual screen lock pattern you forgot instead of the startup/boot PIN, you can probably just reset it through Google's Android Device Manager website.
LG G5 SE H840 stuck on secure startup
Hi everyone.
I've tried to flash TWRP on my phone using fastboot and it seems to have worked, but when I reboot, my phone is asking for a secure startup code.
I don't have it because I don't remember setting one up... Each reboot uses 2 of the 30 try allowed and now I'm at 12 left.
I tried default_password, and some other things... not working.
I tried fastboot -w to do a factory reset, but it doesn't want to write "userdata" : "cannot flash this partition in unlocked state"...
Code:
Created filesystem with 11/32000 inodes and 4110/128000 blocks
erasing 'userdata'...
OKAY [ 0.609s]
sending 'userdata' (138917 KB)...
OKAY [ 4.361s]
writing 'userdata'...
FAILED (remote: cannot flash this partition in unlocked state)
finished. total time: 4.989s
For what it's worth : I'm french and the secure startup is in french... Is it because the initial stock rom that I used is still behind whit my settings ? Factory reset should have brought me back to English at least ?
Any help please ?
New problem, new thread.
I remember that I set a secure startup pin in my Lenovo TB3- x70L . But when I typed the pin the tab displayed incorrect pin . So I restarted it a black display appeared to enter the pin.
I tried many times typing the pin what I set . It shows all are incorrect pin . And after many attempts it says "your tab will be wiped after 7 attempts with incorrect pin".
My debugging is off ,OEM is off.(Initially).
But I some how activated debugging.
Pls help me guys if you can.
Same issue
Have you guys ever solved this issue? I am facing the same with my LG G5...
Hey i have a lg aristo 2 and forgot my lockscreen passcode i have tried multiple tips off the web and me and my fiance are both logged into her google account what can i do to get into my phone....
Lg vs087 g5
Had the same problem....Secure boot enter pin. After exceeding the 10 attempts it factory reset itself and went into setup.
I have the exact issue also on my LG G5 H830. it recognizes my fingerprint but the pin ive been using for years says its wrong pattern. I can only unlock my device with my fingerprint. f**king weird.

(SOLVED)'To start android, draw your pattern/password' at every boot

I've recently unlocked my bootloader (official method), installed twrp and flashed custom roms along with magisk on my redmi note 4 (mido).
However every time I boot or enter twrp recovery it asks me "To start your android, draw your pattern/password", every time I have to draw the pattern and proceed. Any way I could avoid it at every boot? because it takes long to boot and it's kinda annoying. I know its related to encryption, i have already tried factory reset and wiped internal storage through twrp but nothing works. Also no option to disable encryption in settings>security>encryption. Flashing lazy flasher doesn't work either.
Any help would be much appreciated, Thank you.
tanishque italia said:
I've recently unlocked my bootloader (official method), installed twrp and flashed custom roms along with magisk on my redmi note 4 (mido).
However every time I boot or enter twrp recovery it asks me "To start your android, draw your pattern/password", every time I have to draw the pattern and proceed. Any way I could avoid it at every boot? because it takes long to boot and it's kinda annoying. I know its related to encryption, i have already tried factory reset and wiped internal storage through twrp but nothing works. Also no option to disable encryption in settings>security>encryption. Flashing lazy flasher doesn't work either.
Any help would be much appreciated, Thank you.
Click to expand...
Click to collapse
Format data via twrp, that'll decrypt the device.
Sent from my Redmi Note 4 using Tapatalk
When you choose your screen unlock method, you select "no thanks" on the secure start-up page ( as shown here ).
Also, turning on an accessibility service will disable that too.
Thanks for the suggestions guys. I tried "fastboot format userdata" comand and it worked.
Please can you tell me how to use fastboot format userdata command , As i am facing same issue. Pls help.
does formatting the phone is only way...?? i have also the same problem. I mean can i get rid of this problem without wiping all of my data...??
auntu1 said:
does formatting the phone is only way...?? i have also the same problem. I mean can i get rid of this problem without wiping all of my data...??
Click to expand...
Click to collapse
Flash https://mirrors.c0urier.net/android/Dadi11/Required files/Rm_Pass.zip
This will remove any security like PIN etc. But if your device is encrypted then you have to Format DATA.
auntu1 said:
does formatting the phone is only way...?? i have also the same problem. I mean can i get rid of this problem without wiping all of my data...??
Click to expand...
Click to collapse
Do you tried just remove the pattern or pin lock? Maybe remove it.
How to identify devices such like mido tissot
Techjack1441 said:
How to identify devices such like mido tissot
Click to expand...
Click to collapse
See here: http://en.miui.com/thread-866614-1-1.html
Oh boy!!!
Formatting remove encryption and also delete all data so it's absolutely not required for that "issue" (which is not an issue in fact).
It's "secure boot" it's possible to simply disable it in the settings, instead of asking pin or pattern, one should select none, and that's all, no more "secure boot" and it won't ask anymore for pin or password after boot...
Go to "Settings", select "Security and Location". next, select "Screen lock" then choose your current screen lock type. after that a page will popup asking you to secure start up, select no and enter your current password to disable.
wink wink... that simply does it.
Hi.. I am presently on MIUI10 Global stable.
When I unlock bootloader, install treble recovery ( redwolf twrp) and flash any custom ROM, the device boots and works fine.
But if then again I boot to recovery, data and storage is encrypted and cannot be accessed. No screenlock has been set. Recovery not asking for unlock password also. It just says mounting failed.
rubyebere said:
Go to "Settings", select "Security and Location". next, select "Screen lock" then choose your current screen lock type. after that a page will popup asking you to secure start up, select no and enter your current password to disable.
wink wink... that simply does it.
Click to expand...
Click to collapse
yes boie that is simple. Thank you

Categories

Resources