So I'm no developer, havent kept up on code for a couple years but I do love or did (when I had MDK before my phone **** out and VZW replaced with MJ7) so I've been stuck on safestrap not that its a bad thing if theres more than 1 or 2 roms then its almost better with multiboot options...n really really hard to brick it hashcode your my hero)
Install:
Unzip into your SS backup dir and restore to a blank rom slot. I went super small as small as SS would allow for slot creation. If your getting an error on restoring be sure to try deleting the slot and readding it then restoring the system files. If your WiFi doesn't work try flashing MJ7 / MK2 SS modules. Only flash after booting up rom and knowing wifi isnt working (big thx to Mistertac and Timmy for that tidbit to get wifi working on MJ7). This rom might work for others like ME7 SS users maybe even MDK Twrp users but I need testing done for me.
Got bored ****ed with International rom Omega v18 (Also have Foxhound 3.5 working on SS bout done with that port) until it worked perfect for what I use it for no other areas have been tested but it seems fairly stable for me... wifi works great. 4g im getting better speeds on this rom than HyperDrive (could be fluke someone check if the rom works for them plz?) and wifi tethering, phone, internet, messaging). This install was pretty much a debloated Omega 18 in which I chose only basics ****ed around for a couple hours and finally came up with solutions... You more than likely will have to move or load apps you want on here as this is just a safestrap ... like I said no developer here was hoping someone might run with this (aroma, updates, fixes, repackaging, zip) and continue to port more of these over with me to our safestrap dependent asses.
This was tested on SS 3.70&3.71 from a MK2 stock and default kernel for SS. Like I said I'm not really a developer and a airly new member to xda so I had to post here. if it doesnt work for you or sucks or u think I suck well thx for the hate least I tried got no love for the ppl not doing **** to contribute and just *****ing or posting stupid questions that are answered with simple forum searches! thx goes out to any developer doing work on the VZW..or S4 in general. ::indie:: thx for the rom its pretty nice open carrier on next release?, Hashcode specifically dudes probably saved a million lives jrkruse, Surge1223, ktoonsez and open1your1eyes obviously, sbreen94, k1mu, old&slow, beanstown106, Dubbsy, invisiblek
Download (I'm hoping this works for enough ppl to test quick repackage and repost for me, msgs wont get checked too often I smoke to much to...)
https://docs.google.com/uc?id=0BwL6-n3ZMcedSnBsWE5ITVJOVWc&export=download
Happy New Year! Happy Flashing or Restoring obviously dont hold me responsible for any damage done to your phone i tested this on 3 friends phones and my own before uploading it.
Oh if it works n u arent an asshole, +1 thank me, indie, Hash and Surge
Didn't work. I tried 3 times on SS 3.71 and it failed all 3 times. ..I didn't even get to flashing the mk2 module
Sent from my SCH-I545 using XDA Premium HD app
warchyld77 said:
Didn't work. I tried 3 times on SS 3.71 and it failed all 3 times. ..I didn't even get to flashing the mk2 module
Sent from my SCH-I545 using XDA Premium HD app
Click to expand...
Click to collapse
You don't flash this. You unzip it and copy it to your twrp backup folder then restore it to a Rom slot I believe.
Please correct if I am wrong op.
Sent from my SCH-I545 using Tapatalk
warchyld77 said:
Didn't work. I tried 3 times on SS 3.71 and it failed all 3 times. ..I didn't even get to flashing the mk2 module
Sent from my SCH-I545 using XDA Premium HD app
Click to expand...
Click to collapse
Correct. Restore as a backup
It worked like a charm Thanks guys
Sent from my SCH-I545 using XDA Premium HD app
Looking forward to playing around with this later Tonight. Thanks for trying to add more options for us SS folk!
Verizon Galaxy S4
SafeStrap 3.71
Hyperdrive 12
Works for me. Will be playing with it over the next day or so.
Sent from my SCH-I545 using xda app-developers app
no flashing needed.
didnt know easiest way to pack this as i had never done one. just unzip into your backup folder on sdcard or int wherever safestrap backs up too for you already. then restore it into any rom slot, i had it on slot 2 and hyperdrive on 1 rooted stock/slightly modded mk2 on my stock. im pretty sure this will work on any MJ7 / MK2 as it just "flashes" the mk2 modem to that slot. Oh and DO NOT FLASH MK2 MODULES or ANY MODULES OVER THIS. IT WILL MORE THAN LIKELY MESS IT UP. IF IT WAS NECESSARY I WOULD HAVE INCLUDED IT IN INSTRUCTIONS. Glad to hear its working for a couple people. Maybe someone could get this thread moved into the proper forum as its apparently some what working now which might help some other safestrappers?
This is a clean wipe install so dont try to carry any of your data or settings over until after 1st boot. after that flash whatever you want for testing no other mods have been tested with this it does have the 10% volume boost preflashed.
It didn't work for me.
Downloaded - Unzipped - Placed the backup in my TWRP backups folder.
Created a fresh slot, During restore it FAILED during system restore.
Anyway to get an MD5, possibly I got a bad dl??
might have to play with this later
lazer9 said:
It didn't work for me.
Downloaded - Unzipped - Placed the backup in my TWRP backups folder.
Created a fresh slot, During restore it FAILED during system restore.
Anyway to get an MD5, possibly I got a bad dl??
Click to expand...
Click to collapse
hey sorry bud did u try deleting the slot and making a new one and restoring it to that? i have various ppl confirming so far besides those trying to flash the file theyve had success. hopefully one of them is able to help me turn it into a more stable flashable rom for SS. otherwise if you tried the previously mentioned steps im out of info for now sorry again for wastet of time. i dont know that it would matter at all but this was on safestrap 3.7 that i had been using not 71... screenshots, md5 and the works will have to wait for a proper flashable file release. thx
lazer9 said:
It didn't work for me.
Downloaded - Unzipped - Placed the backup in my TWRP backups folder.
Created a fresh slot, During restore it FAILED during system restore.
Anyway to get an MD5, possibly I got a bad dl??
Click to expand...
Click to collapse
See if your MD5 matches mine.
684bfc31f63aa414b3402bf9d310d5b0
I have SS 3.71 so it seems to restore with both. My S4 is MK2 Saferooted.
Sent from my SCH-I545 using xda app-developers app
It's running fine for me so far. . I did however end up flashing mj7 modules to get my wifi working.
I'll check back here tomorrow after I play around for a bit.
Sent from my SCH-I545 using XDA Premium 4 mobile app
gigilie said:
hey sorry bud did u try deleting the slot and making a new one and restoring it to that? i have various ppl confirming so far besides those trying to flash the file theyve had success. hopefully one of them is able to help me turn it into a more stable flashable rom for SS. otherwise if you tried the previously mentioned steps im out of info for now sorry again for wastet of time. i dont know that it would matter at all but this was on safestrap 3.7 that i had been using not 71... screenshots, md5 and the works will have to wait for a proper flashable file release. thx
Click to expand...
Click to collapse
Thanks for giving us a try at this anyhow and yes, it seems some have had success so I'm not giving up just yet. I have Hyperdrive installed in my stock side so this was the first slot I created since months ago on a prior build of SS. Yes, I am using the latest 3.71 or whatever it's version is.
klabit87 said:
See if your MD5 matches mine.
684bfc31f63aa414b3402bf9d310d5b0
Click to expand...
Click to collapse
Thanks for that. I will re-download now that I'm home (Maybe something went amiss with the work dl) and then compare the MD5 to yours.
Update: Just downloaded at home and the MD5 on the .zip reports --> B8F477E4A8C31DE5D272C2E7B141A85A
lazer9 said:
Thanks for giving us a try at this anyhow and yes, it seems some have had success so I'm not giving up just yet. I have Hyperdrive installed in my stock side so this was the first slot I created since months ago on a prior build of SS. Yes, I am using the latest 3.71 or whatever it's version is.
Thanks for that. I will re-download now that I'm home (Maybe something went amiss with the work dl) and then compare the MD5 to yours.
Update: Just downloaded at home and the MD5 on the .zip reports --> B8F477E4A8C31DE5D272C2E7B141A85A
Click to expand...
Click to collapse
try it again then if your first zip had that goofy md5 mine is the same as your updated md5. blame google drive i guess. hope it works 2nd time around.
gigilie said:
try it again then if your first zip had that goofy md5 mine is the same as your updated md5. blame google drive i guess. hope it works 2nd time around.
Click to expand...
Click to collapse
Did the same thing again. Failed about a two minutes into the restore process system. Is there a special size allocation I need to make for system in SS slot? I'm just going with the default 2,xxx something..
lazer9 said:
Thanks for giving us a try at this anyhow and yes, it seems some have had success so I'm not giving up just yet. I have Hyperdrive installed in my stock side so this was the first slot I created since months ago on a prior build of SS. Yes, I am using the latest 3.71 or whatever it's version is.
Thanks for that. I will re-download now that I'm home (Maybe something went amiss with the work dl) and then compare the MD5 to yours.
Update: Just downloaded at home and the MD5 on the .zip reports --> B8F477E4A8C31DE5D272C2E7B141A85A
Click to expand...
Click to collapse
Thanks. I will give it a shot again.
Just got home so it will only take about 5 mins if that.
Edit: Decided to do it on my phone instead and yours is correct @lazer9.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SCH-I545 using XDA Premium 4 mobile app
I'm downloading it. Ill make it so its a proper rom.zip and patch issues related to root/Safestrap/kernel if there are any. Ill re-upload and then OP or someone else if he wishes can takeover from there. Obviously ill test it first lol.
Edit: Successfully booted the rom zip of it i made to the stock slot but couldn't/didn't want to wait for the initial boot screen to get done (the medallion w/ a lion coin spinning).. Also successfully booted my own rom I made in the 1st slot. So I went from stock to having two different rooms installed lol, I'll upload after I check somethings, specifically if omega will go past the bootscreen.
Ok everything is working good for me so far. I read further back to NOT flash any modules during install...which i didnt at first but then my wifi wasnt working so I went back in and flashed them and it fixed that problem.
Other than that everything is working great. Very lightweight rom huh? I mean as far as TW goes, you know what i mean.
Hey im happy to see more options coming our way.
Ive been SafeStrapped since my Razr, although I had many more rom options on that phone, i love the S4 and what people are still trying to do for our locked down phones.
Luckily i can get my custom recovery on with my girls Sprint S4 lol
Related
Hello,
Could you pls help a noob with a rooting problem? I attempted to root my ICS AT&T Galaxy Note i-717 using Odin3 v 1.85 and a pda.tar file. Prior to that, I had checked and confirmed the USB drivers are installed (I have Kies software installed on the PC. However, folliwing the succesful flash of pda.tar I got the phone stuck at the Samsung screen. I could still get to the download screen. However, the phone would not go pass that screen. Can you pls tell me what I did wrong/guide me w simple steps on how to fix the phone and finish the root? I have the read many different root treads but I find them confusing. Treads are ponting at different files to be frashed/installed on the phone. Thanks very much.
This happens from time to time...don't worry.
Reboot phone in download mode, connect phone, reflash kernel.
A few things: use stock samsung cable. Use back of computer usb port. Reboot computer before you try again. Re download the kernel to be sure your file is not corrupted. Make sure phone battery is more than 80%.
re:
rangercaptain said:
This happens from time to time...don't worry.
Reboot phone in download mode, connect phone, reflash kernel.
A few things: use stock samsung cable. Use back of computer usb port. Reboot computer before you try again. Re download the kernel to be sure your file is not corrupted. Make sure phone battery is more than 80%.
Click to expand...
Click to collapse
Rangercaptain,
Thanks very much. Where can I get the kernel from and which one/which file do I need to flash? Also, how do I flash it? Do I use Odin or another method? Again Thanks a lot!
ptanev said:
Rangercaptain,
Thanks very much. Where can I get the kernel from and which one/which file do I need to flash? Also, how do I flash it? Do I use Odin or another method? Again Thanks a lot!
Click to expand...
Click to collapse
Follow the part one instructions in the first post. Read twice click once. Take your time.
http://forum.xda-developers.com/showthread.php?p=24539068
Make sire lies is closed
Sent from my SAMSUNG-SGH-I717 using xda premium
Nolenm04 said:
Make sire lies is closed
Click to expand...
Click to collapse
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Problem solved
rangercaptain said:
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Click to expand...
Click to collapse
All,
Thanks very much for your help! I fugured it out and am now up and running!
I ended up flashing rooted Stock ICS ROM from FJ!
Thanks very much to all of you and FJ!
rangercaptain said:
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Click to expand...
Click to collapse
Oh snap lol just noticed I misspelled half of that oops
Sent from my SGH-I717 using xda premium
Nolenm04 said:
Oh snap lol just noticed I misspelled half of that oops
Sent from my SGH-I717 using xda premium
Click to expand...
Click to collapse
I liked it....:laugh:.....:good:
I thought it was drunk-xda-ing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rangercaptain said:
I thought it was drunk-xda-ing.
Click to expand...
Click to collapse
:laugh:
rangercaptain said:
I thought it was drunk-xda-ing.
Click to expand...
Click to collapse
Lol
View attachment 1291558
Sent from A Closet @ Arkham Asylum on my GNote using Forum Runner, Black ★.
Stuck at Samsung
I have the same issue tho have tried troubleshooting and could really use some extra help.
Updated to ATT stock ICS update a few months ago. Everything workin fine.
Wanted to root it so I could back everything up not to lose anything when moving to JB.
Rooted by flashing Da_G's pda.tar, reboot, and then flashed 2.3.3.0 TWRP
Noticed it was stuck at Samsung.
Here's where I'm kickin myself because I should have backed it up before all this, but I waited because I figured root doesn't wipe data!
Entered TWRP, backed up.
Now what I've tried to fix it... and failed
1. Reflashed pda.tar about 5 times
2. Found a stock pda "pda-odin-att-stock.tar", flashed (fixed) but it's stock setup and contacts and other google services don't work, lost homescreen icon placement and all other settings.
3. TWRP: Restore all = stuck at Samsung again
4. Repeat 2 and Restore only System
5. Repeat 2 and Restore only Data
6. Repeat 2 and flash pda.tar = boots, but same thing with it all stock, so I restore and it's stuck again.
It's my wife's phone and she has contacts that aren't saved in Google, to-do lists saved in app data files, and to be honest, she said everything better be exactly the same after updating (which I promised it would be since the plan was to root, backup, update, and restore), so I'm kinda trying to save my hide. PLEASE HELP me save my ass ha!
Other things to note: I just rooted a new phone about 30mins prior with the exact same root and TWRP files and it went very smooth, no issues.
Using a Samsung original cable on a laptop. Phone Battery was ~30% when I did all the steps, but since then read that battery should be higher so swapped out to fully charged battery and retried the steps.
Using the root kernel you did, basically flashed a Gingerbread kernel over an ICS rom. (Doesn't work)
Your best bet at this point, is too flash a rooted ICS build from bigfau ...(located in the super thread stock section)
Just flash using TWRP ....BUT !!!
make sure you wipe the dalvik cache, system cache, and system before flashing the rooted ICS build.
Once the rom is flashed, you will be stock and rooted.
Regarding data you have lost with no backup....start begging forgiveness now ....it's gone ....g
gregsarg said:
Using the root kernel you did, basically flashed a Gingerbread kernel over an ICS rom. (Doesn't work)
Your best bet at this point, is too flash a rooted ICS build from bigfau ...(located in the super thread stock section)
Just flash using TWRP ....BUT !!!
make sure you wipe the dalvik cache, system cache, and system before flashing the rooted ICS build.
Once the rom is flashed, you will be stock and rooted.
Regarding data you have lost with no backup....start begging forgiveness now ....it's gone ....g
Click to expand...
Click to collapse
Wouldn't I be able to just flash an ICS Kernel to undo the GB kernel and set things straight? Or is the whole thing ruined already?
I have the data/app and data/data files. If all's really lost, I'll just put JB on it. If I copy the data/app and data/data files onto the new image will all the apps with their settings/data be restored at least?
Yes, flash the correct kernel.
I think what happened to me is the OS got deleted cuz once I flashed a rom I was good to go!
I am stock rooted and didn't modify a single thing. The only thing I did was flash TWRP recovery because I was planning on flashing ROMS but I eventually decided to stick to stock rooted so I reflashed the stock recovery. I received the update a week ago and proceeded to install it. However, it seems to fail. When the phone boots into stock recovery it attempts to install the update but at about a 3rd of it's progress it immediately stops and all that is displayed on the screen is a phone flat down with a red triangle and exclamation mark inside it. I've tried searching about this but everything I find leads me to the One X and I've never owned that phone so I'm not sure how similar they really are. Does anyone know why this is happening? Would it possibly be due to a corrupted recovery file within my download source? Any help would greatly be appreciated.
Thanks in advance.
Anyone?
LuigiBull23 said:
I am stock rooted and didn't modify a single thing. The only thing I did was flash TWRP recovery because I was planning on flashing ROMS but I eventually decided to stick to stock rooted so I reflashed the stock recovery. I received the update a week ago and proceeded to install it. However, it seems to fail. When the phone boots into stock recovery it attempts to install the update but at about a 3rd of it's progress it immediately stops and all that is displayed on the screen is a phone flat down with a red triangle and exclamation mark inside it. I've tried searching about this but everything I find leads me to the One X and I've never owned that phone so I'm not sure how similar they really are. Does anyone know why this is happening? Would it possibly be due to a corrupted recovery file within my download source? Any help would greatly be appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Did you relock bootloader?
Sent from my HTC One using Xparent Skyblue Tapatalk 2
Mine is unlocked and the update worked fine. You just need the stock Tmo recovery to make it work.
mrmytouch said:
Mine is unlocked and the update worked fine. You just need the stock Tmo recovery to make it work.
Click to expand...
Click to collapse
That's the thing.. I do have the TMO stock recovery. Unless you can provide me with another link, the one I downloaded doesn't seem to work at all and I've redownloaded numerous times. I still get that triangle..
Link to stock tmobile recovery is here
I got it from this thread
mrmytouch said:
Link to stock tmobile recovery is here
I got it from this thread
Click to expand...
Click to collapse
Thanks man. much appreciated. I will try this one out and see how it goes.
LuigiBull23 said:
Thanks man. much appreciated. I will try this one out and see how it goes.
Click to expand...
Click to collapse
Did it work out for you mate?
mrmytouch said:
Did it work out for you mate?
Click to expand...
Click to collapse
My apologies. I completely forgot to report back to this.. YES, all is well now. Not sure why the other recovery didn't work as it did work for others but guess that doesn't matter now. Thanks a lot for your help. Much appreciated.
I used this recovery, and it completely wiped my phone and all my stuff was gone. And it still didn't install the update. Is that normal?
Sent from my HTC One using xda app-developers app
bestofrhcp said:
I used this recovery, and it completely wiped my phone and all my stuff was gone. And it still didn't install the update. Is that normal?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Sounds more like a bootloader issue...
bestofrhcp said:
I used this recovery, and it completely wiped my phone and all my stuff was gone. And it still didn't install the update. Is that normal?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Yes when you flash recovery I believe it will Wipe your sd card. But your stuff should be on your gmail account though at least your phone numbers. You need to give us more info. Are you on stock t mo rom?
mrmytouch said:
Yes when you flash recovery I believe it will Wipe your sd card. But your stuff should be on your gmail account though at least your phone numbers. You need to give us more info. Are you on stock t mo rom?
Click to expand...
Click to collapse
As far as I'm aware unlocking the bootloader or flashing an RUU are the ONLY things that wipe your storage. Flashing recoveries doesn't touch it except for adding in the necessary files to function properly.
LuigiBull23 said:
As far as I'm aware unlocking the bootloader or flashing an RUU are the ONLY things that wipe your storage. Flashing recoveries doesn't touch it except for adding in the necessary files to function properly.
Click to expand...
Click to collapse
I really cant remember if it did or did not when I flashed the recovery but in post #8 he said it wiped his sd. I could be wrong though. Just trying to help this guy out. I do know unlocking bootloader does wipe your sd though so i'm sure your right I just cant remember.
:| is the update supposed to go "reboot, recovery, blue bar moving along HALT reboot, recovery bigger loading blue bar, STOP dead, Red triangle"
ive tried it 3 times no luck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ive Locked and reset the tamper flag with revone still wont install the OTA
its no so much I WANT the update as much as i WANT my phone to stop buggin me about the damn update XD
ive followed the thread linked above and tried all methods provided. no luck so im sure im doing something horrificaly wrong XD
all i can provide is this,
Verifying curent system...
assert failed: apply_patch_check("/system/build.prop", "5c450bd35b662fa55d667bda7463960e2eb669c
5", "48daa0113456b06b44b52c1b777d7d2e49af1196")
Instalation aborted.
soo all i got was something is up with the build prop that it dosnt like... as for the other randomness hell if i know.
its weird though as ive never rooted the phone. i just unlocked bootloader to get a custom recovery on it so i could make backups of my entire phone.
and flash that one mod that gets rid of the 3 dot bar.
Heres the build prop paste bin
http://pastebin.com/cT1sZ73K
Sieze said:
:| is the update supposed to go "reboot, recovery, blue bar moving along HALT reboot, recovery bigger loading blue bar, STOP dead, Red triangle"
ive tried it 3 times no luck.
ive Locked and reset the tamper flag with revone still wont install the OTA
its no so much I WANT the update as much as i WANT my phone to stop buggin me about the damn update XD
ive followed the thread linked above and tried all methods provided. no luck so im sure im doing something horrificaly wrong XD
all i can provide is this,
Verifying curent system...
assert failed: apply_patch_check("/system/build.prop", "5c450bd35b662fa55d667bda7463960e2eb669c
5", "48daa0113456b06b44b52c1b777d7d2e49af1196")
Instalation aborted.
soo all i got was something is up with the build prop that it dosnt like... as for the other randomness hell if i know.
its weird though as ive never rooted the phone. i just unlocked bootloader to get a custom recovery on it so i could make backups of my entire phone.
and flash that one mod that gets rid of the 3 dot bar.
Heres the build prop paste bin
http://pastebin.com/cT1sZ73K
Click to expand...
Click to collapse
Are you even on stock recovery?
LuigiBull23 said:
Are you even on stock recovery?
Click to expand...
Click to collapse
technicly yea XD i flashed the latest stock recovery and being as my phone wasnt OTA'd to the 4.2.2 its recovery was from the 4.2.2 but the rest of the phone wasnt. unless i can get my hands on the stock recovery from my phone im **** out of luck and will be forever stuck with the red triangle of ass... its at times like this i regret my haste and stupidity XD
just tryed again and now its spitting out that assert failed for system/app/settings.apk
FoxHound Ground Zeroes v1.0 for Verizon S4 - NCx (NC2 / NC5 +) based off of Foxhound 4.7 International
HELLO FELLOW ROM LOVERS,
Here is another present from me... I present to you the first NC2 / NC5 Custom Rom built on and for the new Verizon 4.4.2 updates. This was tested on both but primarily NC2 and my upgrading methods were used and worked the best.
Kids dont flash ROMs without your parents consent. People don't hold the handicapped dude hostage if this messes up your phone. ITs been tested up and down but some ppl got bad luck... so don't hold me or XDA or anyone that flashes or developers or Verizon responsible for anything bad that happens to your phone from here out.... ok u can try to hold verizon its kinda their fault anyway.
LINK TO ORIGINAL ROM THREAD (Screenshots and descriptions for now until I have time to update this OP)
How to Install:
0. If you have 4.4.2 and Safestrap already installed just flash the ROM and SuperSu and RESET BAM YOUR DONE. Otherwise Follow bellow guide!!!
1. Download the ROM along with these files: SuperSu1.94, gogOdin3.10(the newest Odin brought to u by mua 1st, QuickUpgrade NC2 Safestrap (or other custom recovery) flashable file, NC2 WiFi Fix (only flash if broken wifi in ROM),NC2 Boot.img Only.tar Odin Flashable and pickup and install Safestrap 3.72 found in AT&T S4 thread.
2. Install your version of the ROM in Safestrap 3.72 under the Stock slot. This is a dirty Flash (no wipe) so you may need to wipe the System 1st. After installing the ROM flash the NC2 QuickUpgrade then the NC2 WiFi Fix the SuperSu194 zip then (you can link the installs together so SS flashes all 4 at once.) Now instead of normal resetting go to "Reboot" under main menu of Safestrap. Choose Download Mode (or just restart and hold Vol-Down) when your into Download mode plug phone into the Computer and load up Odin 3.10 and insert the NC2 Boot img.tar into the AP slot and press Start.
3. Phone will restart, give it a minute or two if you don't hear music its not working perfectly. In this situation you'll need to download: NC2 Hlos/Modem and this NC2 Full Upgrade no Bootloaders.tar (both are flashable only in Odin 3.10) now restart phone to download mode again and flash these with the Full Upgrade in the AP slot and the hlos in the CP and press start. Phone will start once before entering Recovery automatically, don't panic completely normal its flashing the cache update now... Phone will restart automatically and now if you don't see the bootanimation or hear music you either need to start completely over. Sorry about the music if its not your personal preference I've got a tool that will easily modify bootanimations and music (along with a lot more) in the next week or so. Just putting on finishing touches to final version 1.0. I've probably flashed 30 ROMS this way and still have my KNOX intact and the same bootloaders I started with. So no worries about voiding warranty by triggering KNOX cause U WONT if DONE RIGHT!!!
4. Vote 5 Stars, Donate, Thank in person or give a +1 if you enjoy the ROM!!!
5. FLASH EITHER THE KEYGUARD REMOVAL.ZIP IN SAFESTRAP OR THE KEYGUARD FIX.ZIP PLEASE! NEW VERSION WILL COME +1s pleas continue to post bugs or issues.
Thanks,
gogolie / gigilie
v1
PS This ROM has my added Theme's pack that ill be releasing shortly to change the theme from settings on home Launcher3 choose Themes and wala.... something like 10 at least to choose from. I know right, your welcome
As a precautionary measure after installing thru safestrap or custom recovery before restarting the ROM flash SuperSu and then go into your system / priv-app / directory and find the file KeyGuard.apk and delete it... i'll be releasing an updated version soon
this is for my...........................
What about for MDK users?
ahoslc said:
What about for MDK users?
Click to expand...
Click to collapse
If you're on MDK you should be able to install this like any other ROM but I would wait for conformation from OP first.
Sent from my SCH-I545 using XDA Free mobile app
i installed this and got a Keyguard FC, wont let me do anything...
Rom should be flashed on Stock or any slot?
You had me at THE ROM U DREAMT ABOUT LASTNITE <3
jcs33 said:
i installed this and got a Keyguard FC, wont let me do anything...
Click to expand...
Click to collapse
I need more info than that bro. was it a clean install (wiped/formated first?) and was it on safestrap or mdk? sounds like possibly u had a rom underneath this install but i dont know as i havent heard from any other users. it works fine for me tho... keyguard was one of the first things i had to replace with the verizon one in order to port it.... no worries tho i can do a patch if thats an issue
I did a clean install, wiped everything except SD and installed everything just like you said using safestrap 3.72.(i wiped data but did not format data) It boots up good but Gives the keyguard FC persistently..
gigilie said:
I need more info than that bro. was it a clean install (wiped/formated first?) and was it on safestrap or mdk? sounds like possibly u had a rom underneath this install but i dont know as i havent heard from any other users. it works fine for me tho... keyguard was one of the first things i had to replace with the verizon one in order to port it.... no worries tho i can do a patch if thats an issue
Click to expand...
Click to collapse
Man! NC5 Stock Rooted (Surges method), Stock or new slot??? Instructions have confused me.
Pretty sure u cant install to slots on 3.72 on vzn. Only stock.
Sent from my SCH-I545 using XDA Free mobile app
---------- Post added at 05:52 AM ---------- Previous post was at 05:48 AM ----------
2. Install your version of the ROM in Safestrap 3.72 under the Stock slot.
Click to expand...
Click to collapse
Sent from my SCH-I545 using XDA Free mobile app
Can't get past the FoxHound boot animation. Got the music too, but it just goes round and round after that.
jcs33 said:
I did a clean install, wiped everything except SD and installed everything just like you said using safestrap 3.72.(i wiped data but did not format data) It boots up good but Gives the keyguard FC persistently..
Click to expand...
Click to collapse
ok for the time being until i get a fix up... easiest way to quick patch yourself would be restart to safestrap then enter advanced (first make sure system is mounted under mounts) then file explorer and then /system/priv-app/ find keyguard.apk and delete it. this rom comes with its own keyguard so this wont affect the experience or ROM itself. sorry for the trouble thanks for spotting the bug sucks on my phone I had it working with my own version of S5's Particle Effect on that keyguard.... next release. u guys check out all the themes yet?
TW - Main Menu - Themes choose theme. i included a but load of new themes lemme know how they work
Dont flash to anything but stock slot. safestrap doesnt support slots on 4.4.2 yet.
joshnat said:
Can't get past the FoxHound boot animation. Got the music too, but it just goes round and round after that.
Click to expand...
Click to collapse
make sure your flashing on a clean system.... or flash over official NC2 or NC5 rom. then upgrade using my methods. use an odin all in one pack for NC2 or NC5 (my vote is NC2 its betr)
judging by your boot symptoms i'm hoping thats what it is maybe a cache flash would fix it too.
op updated
put those keyguard fixes online one will remove it the other will remove it and install a different one.. lemme know
gigilie said:
ok for the time being until i get a fix up... easiest way to quick patch yourself would be restart to safestrap then enter advanced (first make sure system is mounted under mounts) then file explorer and then /system/priv-app/ find keyguard.apk and delete it. this rom comes with its own keyguard so this wont affect the experience or ROM itself. sorry for the trouble thanks for spotting the bug sucks on my phone I had it working with my own version of S5's Particle Effect on that keyguard.... next release. u guys check out all the themes yet?
TW - Main Menu - Themes choose theme. i included a but load of new themes lemme know how they work
Dont flash to anything but stock slot. safestrap doesnt support slots on 4.4.2 yet.
Click to expand...
Click to collapse
I did exactly this, I was stoked too because this seems like a sweeeeeeet rom. After reboot I got an even quicker, constant "System UI FC"
---------- Post added at 11:02 AM ---------- Previous post was at 10:54 AM ----------
gigilie said:
put those keyguard fixes online one will remove it the other will remove it and install a different one.. lemme know
Click to expand...
Click to collapse
Thanks much for the fixes, even though Ive spent hours trying... haha jk mang I really do appreciate ya.
But the link for keyguard removal needs to be updated
gigilie said:
put those keyguard fixes online one will remove it the other will remove it and install a different one.. lemme know
Click to expand...
Click to collapse
Neither of them work... Still just the same fc... I unzipped another rom and replaced the apk in ss file manager... same problem
Installed on NC5 Stock...after 12 hours still slow and warming the phone, Wifi is not working, battery drain very fast...speed is a pain...otherwise the rom looks pretty good with great features
Zooandbio4me said:
Neither of them work... Still just the same fc... I unzipped another rom and replaced the apk in ss file manager... same problem
Click to expand...
Click to collapse
I did a full wipe, redownloaded both fixes, tried again in several combinations, chmod'ing, etc etc etc. to no avail.... love you ya giglie mothafu**** please help
Also unable to uninstall bloatware and pre installed apps. Please help
ZVA-Lollipop!
Brought to you by
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is BONE STOCK. It only has Root, Kernel, and Modem/Radio
See post #2 for some important info
See post #3 for extra files/fixes
Install instructions:
1. Flash this in TWRP - MAKE SURE YOU CLEAN FLASH THIS!
In TWRP, select Wipe>Advanced>then select cache, dalvic, data,and system. DO NOT select int or ext SD.
2. Flash Rom
3. Profit!
After install:
Go to Settings>System Updates> and update profile/prl. You can also go to "Activate this device".
If you do not have Sprint bootani or Wifi Calling
You will need your MSL number and do the dialer reset. So in the Dialer ##786#. This will wipe your int SD!! And everthing else, so you will be starting fresh.
Bugs:
None that I know of.
Downloads:
Stock_ZVA_Odexed
Stock_ZVA-Odexed-using-updater-script - This has root, busybox, init.d, and Selinux permissive, only. NO MODEM.
If you use this one, pattern unlock will lockup the phone requiring a battery pull!!!
You do not need to flash this if you're already updated. This is just for those that want to modify the zip before installing. Actually, either one will update you to ZVA.
Deodexed System files only
XDA:DevDB Information
Stock_ZVA_L_Odexed, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2015-06-25
Created 2015-06-26
Last Updated 2015-06-25
Hints, Tips and stuff
You will more than likely need to follow the steps above to get WIFI Calling. I would suggest doing this in the beginning so you don't lose all your work!!!!! I haven't gotten this far yet, but I think it wipes your SD. Make sure to back it up first!!
It didn't wipe internal SD!!! But better safe than sorry
Backup your EFS first!!! Just to be safe - In the FAQ
A dialer reset may be required for a lot of the issues. In order, easy to most invasive.....
##UPDATE#
or
##SCRTN#
or the biggie - which fixes bootani and Wifi calling
##RTN# - requires your MSL. You will need to either call Sprint. Or, follow THIS
Files and fixes
Sd Card fix
Increased mixer paths
Stock kernel with init.d support and Selinux permissive - you must have busybox installed for this to work.
Deodexed files only Not flashable
Do you know if your Navel Kernel works on it?
Jimmy50941 said:
Do you know if your Navel Kernel works on it?
Click to expand...
Click to collapse
I haven't tried that yet. Still experimenting with this new rom.
I know I need to modify for the ext sd though. But that's not a big deal.
engine95 said:
I haven't tried that yet. Still experimenting with this new rom.
I know I need to modify for the ext sd though. But that's not a big deal.
Click to expand...
Click to collapse
Do you think that would cause problems trying it? I dont even use external SD right now.
I almost have the rom downloaded. its slowly downloading at 1.3mbps :-/ lol
---------- Post added at 06:47 PM ---------- Previous post was at 06:45 PM ----------
Jimmy50941 said:
Do you think that would cause problems trying it? I dont even use external SD right now.
I almost have the rom downloaded. its slowly downloading at 1.3mbps :-/ lol
Click to expand...
Click to collapse
edit: Its done downloading, but phone isn't charged enough at the moment for me to feel like flashing. ill give it an hour or so.
Jimmy50941 said:
Do you think that would cause problems trying it? I dont even use external SD right now.
I almost have the rom downloaded. its slowly downloading at 1.3mbps :-/ lol
---------- Post added at 06:47 PM ---------- Previous post was at 06:45 PM ----------
edit: Its done downloading, but phone isn't charged enough at the moment for me to feel like flashing. ill give it an hour or so.
Click to expand...
Click to collapse
Make a backup first. Then try it. I'll try it tomorrow just cuz I'm curious too.
If you get slow dl from there, just pick another server. That usually works.
Navel kernel doesn't work for this rom. Just flashed it and got a security error on boot
See post #3 for files and fixes. All flashable in TWRP
What changes in ZVA?
Nav-bar and status bar are missing, don't know what happened. Came from [ROM][GSM/[Stock 5.0.1]PRIMEGSM (V3.1), full wiped including internal.
Lurien said:
What changes in ZVA?
Click to expand...
Click to collapse
Just little things really. Nothing major.
Mostly I've noticed the WiFi calling just has the icon now.
scorpic1978 said:
Nav-bar and status bar are missing, don't know what happened. Came from [ROM][GSM/[Stock 5.0.1]PRIMEGSM (V3.1), full wiped including internal.
Click to expand...
Click to collapse
You probably need to do one of the dialer codes I've posted in other threads.
##UPDATE#
##SCRTN#
or the biggie
##RTN# - you need your msl for that one
@engine95 so this will
Not give me security error on boot because of autorec is already installed? Also Is it possible to get this deodexed i am running barepops zv8 deodexed now.
Sent from my LGLS990 using Tapatalk
Just wondering, Im new to LG and just wondering if this will include the modem when i flash it or will i flash this and still have ZV8 modem?
galaxyhero said:
@engine95 so this will
Not give me security error on boot because of autorec is already installed? Also Is it possible to get this deodexed i am running barepops zv8 deodexed now.
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
I don't know about autorec. Make a backup then flash this rom. It should work.
Gimme some time. I just put this out yesterday.
JG96EVO said:
Just wondering, Im new to LG and just wondering if this will include the modem when i flash it or will i flash this and still have ZV8 modem?
Click to expand...
Click to collapse
Sorry, forget to say, kernel, modem and system are in the zip. But the modem has the same number, just a tiny bit smaller.
So this will not give lg security error on reboot?can anyone confirm.
Sent from my LGLS990 using Tapatalk
engine95 said:
Just little things really. Nothing major.
Mostly I've noticed the WiFi calling just has the icon now.
You probably need to do one of the dialer codes I've posted in other threads.
##UPDATE#
##SCRTN#
or the biggie
##RTN# - you need your msl for that one
Click to expand...
Click to collapse
Ok.. But does it feel or run better than ZV8 at all?? I downloaded this morning but haven't had time to flash yet. Thanks..
@engine95 how did you bump the kernel. I tried bumping the kernel and it would not boot. Is it okay for me to just take your kernel out of the zip file? I assume that you had to keep the padding. Is there a new bump tool because the one that I use breaks stuff.
l33tlinuxh4x0r said:
@engine95 how did you bump the kernel. I tried bumping the kernel and it would not boot. Is it okay for me to just take your kernel out of the zip file? I assume that you had to keep the padding. Is there a new bump tool because the one that I use breaks stuff.
Click to expand...
Click to collapse
You're more than welcome to use it. Just give credit.
I had to unpack and repack it a different way. Sneaky LG/Sprint. Try using "Android Image Kitchen." mkbootimg tools didn't work as the compression is different.
Your bump should work this way.
I haven't got the fixes/kernel, but this rom feels a lot faster for me. only problem, which might be attributed to the kernel, is my battery died today after 4 hours (died before noon) of sitting in my pocket lol but i work in a building with absolutely no cell service, but usually my phone lasts all day at work, and i have to charge when i get home, or on the way home.
And i did try the Bare Navel Kernel last night before i went to bed, and got the LG Security error trying to boot up.
after a long wait for the firmware to be released of the S4 running OH7 , it still has not been released. However i decided to make it myself and now we finally have it. I have tested it on my S4 that came with OH7 build originally. So here you go guys, Firmware containing OH7 running lollipop 5.0.1 with stock kernel 3.4 of mon Sep. 7 2015.
little guide to help you install the firmware if you need it.
you will find the firmware link below that i have uploaded and as for odin you can just google it. now im sure you can use other versions of odin but always safest to be up-to-date.
you will need: OH7 firmware file (Download link at the bottom), odin 3.10.7, WinRar and USB data cable
steps:
1. put phone into download mode by holding the home+vol up+power keys at the same time.
2. plug your phone into your PC (be sure drivers for the phone are installed correctly)
3. open up your handy tool of Odin
4. open up the firmware file you have downloaded in Winrar and extract it, you will then be given an MD5 File containing the firmware
5. click on "AP" in odin and browse for the file (odin might not respond after that but be patient, it will)
6. after the program responds, double check that F. Reset time and Auto Reboot are the ONLY ones ticked/checked
7.Go ahead and hit start and sit back for a few minutes and let odin do its thing
8. after all goes well and in the top box says "PASS!" then your phone will reboot and be good as new.
Just a heads up that this firmware is meant and made for the prepaid variant of the Verizon S4. I wouldnt recommend trying it on the postpaid S4 for the postpaid firmware has negative effects on the prepaid variant so id assume it have the same outcome on postpaid variant. Also im not responsible like anyone else out there if you brick your phone by not following the steps correctly or flashing it incorrectly in some way. Just a disclaimer that everyone puts out on here. hope this helps everyone. enjoy!
If the link becomes a broken link, let me know and i will update. i just need to move the file from time to time due to high data traffic
Link Update
https://mega.nz/#!Uk412ZwR!IT_c5Lq6hxbs_CbDVJZKIEv9pAMony8vdUgvvVq0zuE
now that i have released the stock firmware of OH7, i am trying to Deodex this also but keep getting failed start ups. i used LBD 2.5 to try an deodex and followed the guide but i hear start up sound not even a second and it stops and it dont show the verizon logo. i used flashfire to flash the deodexed files. so that being said, could some actual dev, deodex this firmware for i cannot? id really appreciate it and id share the deodexed firmware on the thread as well with of course giving proper credit to whomever can deodex it. thanks!
bjf189 said:
now that i have released the stock firmware of OH7, i am trying to Deodex this also but keep getting failed start ups. i used LBD 2.5 to try an deodex and followed the guide but i hear start up sound not even a second and it stops and it dont show the verizon logo. i used flashfire to flash the deodexed files. so that being said, could some actual dev, deodex this firmware for i cannot? id really appreciate it and id share the deodexed firmware on the thread as well with of course giving proper credit to whomever can deodex it. thanks!
Click to expand...
Click to collapse
This needs to be maken into a rom first as well before deodexed but i can do both actually if you don't know how to build a rom.
Sent from my SM-G935V using Tapatalk
Well if you could do both, I'd really appreciate it. I can't even begin to understand how to extract an md5. So confusing. Plus gotta get it to work with flash fire. I tried other roms with flashfire and kept getting system not responding. So I always had to Odin back to stock and on the custom rom I never get even a boot animation. So I'm not sure what's up with it
stang5litre said:
This needs to be maken into a rom first as well before deodexed but i can do both actually if you don't know how to build a rom.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
What you think?
bjf189 said:
Well if you could do both, I'd really appreciate it. I can't even begin to understand how to extract an md5. So confusing. Plus gotta get it to work with flash fire. I tried other roms with flashfire and kept getting system not responding. So I always had to Odin back to stock and on the custom rom I never get even a boot animation. So I'm not sure what's up with it
Click to expand...
Click to collapse
Flash fire is horrible. Use v24 seems to be the best atm. I can do both. In the middle of mod'ing the s5 rom I made. But after I build it I would have you test it 1st before deodexing as you want to make sure it boots 1st before moving on.
Sent from my SM-G935V using Tapatalk
stang5litre said:
Flash fire is horrible. Use v24 seems to be the best atm. I can do both. In the middle of mod'ing the s5 rom I made. But after I build it I would have you test it 1st before deodexing as you want to make sure it boots 1st before moving on.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I think I tried your rom before. Your username was on a rom that I tried. It was non mdk which was said to use. I used flashfire beings I can't have safestrap on lollipop. It's all I could use to flash things thanks to a locked bootloader. But I'll try your suggestion and I can surely test what you put out for the s4. Just need an idea of what to use to flash things. And you talking version 24 of flashfire? Cause I already use that an got those outcomes. Also if it makes it any easier on you, could you just rebuild your ultranote5 rom for the prepaid variant? Whichever is easier for you. I loved the feature list that you had for it though I couldn't get it to get past the boot screen cause it would like freeze at the animation but at the same time there wasn't even an animation. Just a quick Samsung sound that doesn't even finish. Wish I knew more about rom development but it can get get complex I think.
bjf189 said:
now that i have released the stock firmware of OH7, i am trying to Deodex this also but keep getting failed start ups. i used LBD 2.5 to try an deodex and followed the guide but i hear start up sound not even a second and it stops and it dont show the verizon logo. i used flashfire to flash the deodexed files. so that being said, could some actual dev, deodex this firmware for i cannot? id really appreciate it and id share the deodexed firmware on the thread as well with of course giving proper credit to whomever can deodex it. thanks!
Click to expand...
Click to collapse
Not sure if it's still an issue or not, but I had similar problems before. Flashfire didn't seem to be finishing backups or flashes. I think I was using v18 or 19. Setting the screen timeout to 10 minutes fixed it, no problems after that and I just set it back when I'm done.
F1a5hP01ntX said:
Not sure if it's still an issue or not, but I had similar problems before. Flashfire didn't seem to be finishing backups or flashes. I think I was using v18 or 19. Setting the screen timeout to 10 minutes fixed it, no problems after that and I just set it back when I'm done.
Click to expand...
Click to collapse
My screen never shut off when I used flashfire. So I'm not sure. Could be something in flashfire being it was made for the s4. Not the prepaid variant. So maybe some code in it is different in the postpaid. Who knows
bjf189 said:
My screen never shut off when I used flashfire. So I'm not sure. Could be something in flashfire being it was made for the s4. Not the prepaid variant. So maybe some code in it is different in the postpaid. Who knows
Click to expand...
Click to collapse
Ah, not sure about that. I'm pretty sure my screen would shut off and then reboot shortly afterward as if it finished properly. I also just remembered that flashfire used to rearrange the order that the operations were added and would move the wipe toward the bottom of the list, usually after the flash. I would double check that the order is correct before starting if you haven't already. Those two were the only problems I had. Hope those tips help in some way.
F1a5hP01ntX said:
Ah, not sure about that. I'm pretty sure my screen would shut off and then reboot shortly afterward as if it finished properly. I also just remembered that flashfire used to rearrange the order that the operations were added and would move the wipe toward the bottom of the list, usually after the flash. I would double check that the order is correct before starting if you haven't already. Those two were the only problems I had. Hope those tips help in some way.
Click to expand...
Click to collapse
Well far as I know I'm using the up to date version which is .24. I haven't had the screen off issue or the rearranging problem. Flashfire showed what it was doing and what order it did it in. Everytime I used it, if the screen went black, it would say rebooting...after all was finished. So maybe the version you had was just buggy which the dev did say its a work in progress. Stuff like that, I'd be surprised if they got it to work perfectly with no bugs
stang5litre said:
Flash fire is horrible. Use v24 seems to be the best atm. I can do both. In the middle of mod'ing the s5 rom I made. But after I build it I would have you test it 1st before deodexing as you want to make sure it boots 1st before moving on.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I am more then willing to test any roms out as well. My new Galaxy S4 prepaid is only for tethering on my unlimited data, so I need a rom that I can install Xposed Framework on. Any rom that comes out and needs testing for OH7 based phones, I am onboard with.
TheXev said:
I am more then willing to test any roms out as well. My new Galaxy S4 prepaid is only for tethering on my unlimited data, so I need a rom that I can install Xposed Framework on. Any rom that comes out and needs testing for OH7 based phones, I am onboard with.
Click to expand...
Click to collapse
Well I am looking to install xposed as well but we gotta wait for the dev to have free time to rebuild a rom to the oh7. Well at least he has two people willing to test now for him. How did you get unlimited data with Verizon? They so stingy with data
Sorry been busy. Will build it tonight. Already deodexed. Just got to build it. If all you doing is using it for a hot spot why waste time building a rom for it. Dl a app and use your hot spot. I use foxfi on my s7 edge. Works np.
Let me know. Thought this was for people to actually use.
Sent from my SM-G935V using Tapatalk
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
bjf189 said:
Well far as I know I'm using the up to date version which is .24. I haven't had the screen off issue or the rearranging problem. Flashfire showed what it was doing and what order it did it in. Everytime I used it, if the screen went black, it would say rebooting...after all was finished. So maybe the version you had was just buggy which the dev did say its a work in progress. Stuff like that, I'd be surprised if they got it to work perfectly with no bugs
Click to expand...
Click to collapse
Black screen means the order was incorrect and wipe was moved to the end.
Sent from my SM-G935V using Tapatalk
stang5litre said:
Sorry been busy. Will build it tonight. Already deodexed. Just got to build it. If all you doing is using it for a hot spot why waste time building a rom for it. Dl a app and use your hot spot. I use foxfi on my s7 edge. Works np.
Let me know. Thought this was for people to actually use.
Sent from my SM-G935V using Tapatalk
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
Black screen means the order was incorrect and wipe was moved to the end.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I'm not looking to use it for the hotspot. I already can use it without any problems. I'm just wanting a custom rom/modded stock rom, I hate full stock and I love being deodexed. I'm sure more people will use your rom once they discover it.
If you believe that flashfire moved the order around, what can I do to stop that? The log in it says what it's doing and it says it's going in correct order so im not sure. Ive been using v24 which is latest I think
bjf189 said:
I'm not looking to use it for the hotspot. I already can use it without any problems. I'm just wanting a custom rom/modded stock rom, I hate full stock and I love being deodexed. I'm sure more people will use your rom once they discover it.
If you believe that flashfire moved the order around, what can I do to stop that? The log in it says what it's doing and it says it's going in correct order so im not sure. Ive been using v24 which is latest I think
Click to expand...
Click to collapse
Flash Fire moves it on its own right before you flash. You have to press and hold wipe and drag it to the top. It does this a lot. Pain in the arse. Ok I'll build it then just wasn't sure
Sent from my SM-G935V using Tapatalk
stang5litre said:
Flash Fire moves it on its own right before you flash. You have to press and hold wipe and drag it to the top. It does this a lot. Pain in the arse. Ok I'll build it then just wasn't sure
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I did that cause it put it at the bottom at default. I moved it to the top but still got same outcome. Maybe it's something to do with the kernel an bootloader bring different? That's my guess
bjf189 said:
I did that cause it put it at the bottom at default. I moved it to the top but still got same outcome. Maybe it's something to do with the kernel an bootloader bring different? That's my guess
Click to expand...
Click to collapse
What were you flashing?
Sent from my SM-G935V using Tapatalk
stang5litre said:
What were you flashing?
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Well I tried out your ultra note5 and non mdk one. I believe the ultra note wouldn't show the boot animation and cut off booting sound after a second then did nothing. The other one which was the non mdk one, didn't show boot animation but made the Samsung sound correctly but after booting into the system like ten minutes later of waiting, I get a pop up of system is not responding. If I ignore it an let it load another ten minutes or so, the setup wizard opens but if I hit wait or close on the system not responding box, it all closes and goes to black screen again and just repeats
bjf189 said:
Well I tried out your ultra note5 and non mdk one. I believe the ultra note wouldn't show the boot animation and cut off booting sound after a second then did nothing. The other one which was the non mdk one, didn't show boot animation but made the Samsung sound correctly but after booting into the system like ten minutes later of waiting, I get a pop up of system is not responding. If I ignore it an let it load another ten minutes or so, the setup wizard opens but if I hit wait or close on the system not responding box, it all closes and goes to black screen again and just repeats
Click to expand...
Click to collapse
Uploading stock rom for you to try....androidfilehost keeps losing connection.. You already built the rom from what i read a page back. So do you want me to just Upload the deodexd stuff for you to insert?
Sent from my SM-G935V using Tapatalk