Currently I flashed my phone using GT-I9100G_LP7_ClockworkMod-Recovery_5.5.0.4. I can;t udpate it to Version 6. What is LP7? Please help. Thanks.
meiyi2 said:
Currently I flashed my phone using GT-I9100G_LP7_ClockworkMod-Recovery_5.5.0.4. I can;t udpate it to Version 6. What is LP7? Please help. Thanks.
Click to expand...
Click to collapse
try searching blazing kernal it helps to update
If you cannot flash a recovery from your recovery then find some custom recovery and flash it with odin. Use an odin guide cause if you misplace the file then you brick it I believe It was pda where you need to flash the kernel correct me if iam wrong
Hope this is an workaround if you cant flash any kernel what was the error that you couldnt flash it or did it flash and nothing happend if so maybe the partition table is different?
Sent from my GT-I9100 using Tapatalk
meiyi2 said:
Currently I flashed my phone using GT-I9100G_LP7_ClockworkMod-Recovery_5.5.0.4. I can;t udpate it to Version 6. What is LP7? Please help. Thanks.
Click to expand...
Click to collapse
how have you resolved?
i cannot upgrade my cwm to 6.0.4.5
Related
Dear all,
I want to use CWM Recovery Mode, to flash a new ROM but ended with this message 'can't access to \system\csc\AVI\system'.
Anyone knows what happened here? and how to fix it so i can flash it. Thanks
What rom sounds like a corrupt rom .
jje
JJEgan said:
What rom sounds like a corrupt rom .
jje
Click to expand...
Click to collapse
It's Litening ROM V2.1.
Want to flash it to V2.2 via CWM, but the message apperared even before it's flashing.
varenathan said:
It's Litening ROM V2.1.
Want to flash it to V2.2 via CWM, but the message apperared even before it's flashing.
Click to expand...
Click to collapse
Why don't you try flshing a cf-root manually using ODIN and then flashing v2.2
kryptoner said:
Why don't you try flshing a cf-root manually using ODIN and then flashing v2.2
Click to expand...
Click to collapse
I did flash a CF-ROOT manually, XX_OXA_KG1, using ODIN.
The file from here : http://forum.xda-developers.com/showthread.php?t=1103399
I did flash the last ROM using ODIN (from V1.5 to V2.0). But for V2.1, i flashed it using CWM, goes the same with V2.2.
varenathan said:
I did flash a CF-ROOT manually, XX_OXA_KG1, using ODIN.
The file from here : http://forum.xda-developers.com/showthread.php?t=1103399
I did flash the last ROM using ODIN (from V1.5 to V2.0). But for V2.1, i flashed it using CWM, goes the same with V2.2.
Click to expand...
Click to collapse
You've done everything correctly, better if you ask this in litening rom thread...or maybe wait for 2.3, if it comes as a full rom, it would be great
kryptoner said:
You've done everything correctly, better if you ask this in litening rom thread...or maybe wait for 2.3, if it comes as a full rom, it would be great
Click to expand...
Click to collapse
thanks Kryptoner, but unfortunately i still can not post anything to the ROM thread, i haven't got any permisison from Mods. I wish someone could really post the same problem with me, and i could find the same solution. Don't want to wipe the data (like i have read in other forums if can't flash a new ROM or updated the ROM with CWM)
please help.
Could someone help me? I would appreciate it. Thanks
Did you try to download the rom again?
varenathan said:
It's Litening ROM V2.1.
Want to flash it to V2.2 via CWM, but the message apperared even before it's flashing.
Click to expand...
Click to collapse
Can 2.2 be flashed via CWM .
Page one of the rom posts says flash via ODIN unless you have different instructions its a user error .
jje
Is there s way for me to unroot this phone without the usb port?
Any takers on this issue? Or should I run the battery dead.
I have a stock rom on it but its rooted. Everything looks stock but it has superuser in the apps menu.
Use rootexplorer to delete SU app. Then download the siyah kernel cwm flashable zip. Replace the zimage inside with a stock one. Transfer it to your phone using Bluetooth. Flash it in recovery.
Once you reboot, you should be unrooted and having a stock kernel.
Sent from my GT-I9100 using Tapatalk
Thanks you are a life saver.
where do i get the siyah kernel cwm flashable zip?
DevilStrider said:
where do i get the siyah kernel cwm flashable zip?
Click to expand...
Click to collapse
http://www.gokhanmoral.com/gm/wp-content/uploads/2011/11/Siyah-v2.2beta6-CWM.zip
can I get the zimage off my phone or is it on the net? Also do I just find superuser and delete it or is there a uninstall?
DevilStrider said:
can I get the zimage off my phone or is it on the net?
Click to expand...
Click to collapse
Which stock firmware were you using? The zimage is available inside the tar file. Extract it using winrar.
I have the same problem that i highlighted in the thread below
http://forum.xda-developers.com/showthread.php?p=18614955#post18614955
I have been looking for the Stock Rom in a ZIP format so that i can flash it via Recovery.
Can anyone guide us on how to convert the STOCK ROM to a ZIP Format?? Android 2.3.4 version for Samsung Galaxy S2. I am sure there is a way as i have seen the zip files for other phones.
PLEASE HELP!!
EDIT: Thank you Silesh. I will try this out tonight. Many thanks.
RohitSGS2 said:
I have the same problem that i highlighted in the thread below
http://forum.xda-developers.com/showthread.php?p=18614955#post18614955
I have been looking for the Stock Rom in a ZIP format so that i can flash it via Recovery.
Can anyone guide us on how to convert the STOCK ROM to a ZIP Format?? Android 2.3.4 version for Samsung Galaxy S2. I am sure there is a way as i have seen the zip files for other phones.
PLEASE HELP!!
Click to expand...
Click to collapse
I can make one for you. But you will have to be rooted with a insecure kernel to flash it using cwm. After flashing it, you should be as good as stock.
It's not giving me a uninstall tab. It's giving me a install tab in root explorer
sileshnair said:
Which stock firmware were you using? The zimage is available inside the tar file. Extract it using winrar.
Click to expand...
Click to collapse
Is that the kernal version?
DevilStrider said:
It's not giving me a uninstall tab. It's giving me a install tab in root explorer
Click to expand...
Click to collapse
Long press on the Superuser.apk and delete. You may also have to delete the su binary and busybox to remove any signs of rooting.
Ok superuser is gone. Now to figure out this flash.
DevilStrider said:
Is that the kernal version?
Click to expand...
Click to collapse
No buddy. What did you exactly do to your phone to get it to the present state?
Did you flash any firmware using Odin? How did you root?
Also dial *#1234# and let me know the result.
I see the zimage in the siyah kernel cwm but I' having trouble finding a stock zimage
sileshnair said:
No buddy. What did you exactly do to your phone to get it to the present state?
Did you flash any firmware using Odin? How did you root?
Also dial *#1234# and let me know the result.
Click to expand...
Click to collapse
I flashed a kernal a while back to root and then flashed right back to stock and the root stayed. Also I dialed *#1234# and nothing happened.
sileshnair said:
I can make one for you. But you will have to be rooted with a insecure kernel to flash it using cwm. After flashing it, you should be as good as stock.
Click to expand...
Click to collapse
I am currently rooted and on Sensation ROM 1.8 using Siyah Kernel v 2.0
I would be very grateful if you can make a zip file for XXKI3 (2.3.5) or XXKH3 (2.3.4).
Thank you very much.
I can't find out what stock firmware I have. It's the stock one that came on the phone though.
hi everbody
my question that i have galaxy 9100 with latest stock room 4.0.4 and i want use latest siyah kernel to avoid phone brick later if i want reset my phone later...i can use this kernel without root my phone? and wath about if a room update come later ?
thanks for you all
aboul7orouf said:
hi everbody
my question that i have galaxy 9100 with latest stock room 4.0.4 and i want use latest siyah kernel to avoid phone brick later if i want reset my phone later...i can use this kernel without root my phone? and wath about if a room update come later ?
thanks for you all
Click to expand...
Click to collapse
just flash Siyah kernel via Odin. You don't need root access to do that
Jokesy said:
just flash Siyah kernel via Odin. You don't need root access to do that
Click to expand...
Click to collapse
good but i found recovery version .. i can install it with factory recovery?
and this will no effect room update? i can update without any probleme? or reset?
aboul7orouf said:
good but i found recovery version .. i can install it with factory recovery?
and this will no effect room update? i can update without any probleme? or reset?
Click to expand...
Click to collapse
You need root access first before you can flash a kernel via recovery (factory recovery).
I'll advise you to just flash the kernel via Odin.
However, If you still want to use the recovery option I can post a link for you.
You can always flash updates via Odin. Much faster.
Jokesy said:
You need root access first before you can flash a kernel via recovery (factory recovery).
I'll advise you to just flash the kernel via Odin.
However, If you still want to use the recovery option I can post a link for you.
You can always flash updates via Odin. Much faster.
Click to expand...
Click to collapse
i will appreciate you .. ok post me a link for recovery root methode that compatible with siyah recovery version
thank you again for your hard work
aboul7orouf said:
i will appreciate you .. ok post me a link for recovery root methode that compatible with siyah recovery version
thank you again for your hard work
Click to expand...
Click to collapse
Visit this thread
I helped a guy solve similar issue.
All your questions would probably have been answered in that thread.
Good luck
I'm trying to flash my GNote and have a custom recovery. However when I try to flash a custom rom, CM10 in particular, I get an error that says Status 7. I have searched here and google and cannot find a fix or explanation of what is wrong. Any takers? Thanks for the help. :good:
cdanford said:
I'm trying to flash my GNote and have a custom recovery. However when I try to flash a custom rom, CM10 in particular, I get an error that says Status 7. I have searched here and google and cannot find a fix or explanation of what is wrong. Any takers? Thanks for the help. :good:
Click to expand...
Click to collapse
Update to the lastest cwm or use twrp. I recommend twrp.
just_visiting said:
Update to the lastest cwm or use twrp. I recommend twrp.
Click to expand...
Click to collapse
What version of twrp do you have?
cdanford said:
What version of twrp do you have?
Click to expand...
Click to collapse
Version 2.3.1.1
The link is in the Original Android Development forum.
http://forum.xda-developers.com/showthread.php?t=1647575
I got TWRP installed and flashed CM10 but it is stuck in the boot screen. I wiped cache, dalvik, and factory settings and flashing again. Any idea?
Got it working just fine. THanks for the support guys!
cdanford said:
Got it working just fine. THanks for the support guys!
Click to expand...
Click to collapse
Mind sharing how? I'm on the latest TWRP and CWM, and both cause a bootloop no matter what I do.
derArzt12 said:
Mind sharing how? I'm on the latest TWRP and CWM, and both cause a bootloop no matter what I do.
Click to expand...
Click to collapse
He had an error. Not a bootloop. You're doing something wrong.
Sent from my GT-N7005 using xda premium
joe3681 said:
He had an error. Not a bootloop. You're doing something wrong.
Sent from my GT-N7005 using xda premium
Click to expand...
Click to collapse
cdanford said:
I got TWRP installed and flashed CM10 but it is stuck in the boot screen. I wiped cache, dalvik, and factory settings and flashing again. Any idea?
Click to expand...
Click to collapse
I have the same error, which causes a bootloop. And in his comment it says he's stuck in one.
status 7 error message:radio
kindly check your radio base band and update xxlf1 using thread and try the update again
Hi everybody.
I rooted my GT-I9100 with Siyah-s2-v6.0b4 then installed CWM-SuperSU-v0.99 and tried to install cm-Resurrection_Remix_LP_v5.3.8-20150309-i9100; cm-Resurrection_Remix_LP_v5.3.7-20150309-i9100 and cm-12-20150225-UNOFFICIAL-i9100 but nothing to do...my scrren is lock on this as you can see on picture
And in the end an erro message. What can I do to resolve it ?
Thanks a lot
Corse62 said:
Hi everybody.
I rooted my GT-I9100 with Siyah-s2-v6.0b4 then installed CWM-SuperSU-v0.99 and tried to install cm-Resurrection_Remix_LP_v5.3.8-20150309-i9100; cm-Resurrection_Remix_LP_v5.3.7-20150309-i9100 and cm-12-20150225-UNOFFICIAL-i9100 but nothing to do...my scrren is lock on this as you can see on picture
And in the end an erro message. What can I do to resolve it ?
Thanks a lot
Click to expand...
Click to collapse
Try using a newer version of recovery to install the Rom. It seems as if you are using a older version of recovery than is required for installing RR.
WildfireDEV said:
Try using a newer version of recovery to install the Rom. It seems as if you are using a older version of recovery than is required for installing RR.
Click to expand...
Click to collapse
Thanks Wildfire, saved me saying it! Absolutely amazing how people try to install custom ROMs without following the chef's advice, then jump up and down when things don't work!
Thanks a lot. I will try an other recovery. You'd be very sympathicif you gave me a link to download it.
Thanks a lot
Corse62 said:
Thanks a lot. I will try an other recovery. You'd be very sympathicif you gave me a link to download it.
Thanks a lot
Click to expand...
Click to collapse
here is a link to a newer recovery. Link: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9100/
If you want to flash via recovery, download the zip file to your phone. If you want to flash with ODIN (recommended), download the tar.md5 file to your PC and flash with ODIN (select as PDA file).
Thanks a lot for your help, it worked !
Ale