[Q] Vibration Problem - AT&T Samsung Galaxy S II SGH-I777

My Samsung Galaxy S2 is not responding to the vibration setting. Does anyone know how to fix the problem?

Need a lil more info from ya, plz. What are ur settings that u r trying to get working ??
And just in case ur talking about Haptic feedback...it is disabled if u have Power saving mode on.
If ur not talking about haptic, then have u looked in Settings/Sound at Vibration intensity ? Have u tried a reboot ?

Vibration Problem
I have turned up all of the settings in vibration intensity, I have set the device vibration to basic calls and enabled Haptic Feedback but my phone just isn't vibrating period. None of the settings seem to work.
..... And yes I did reboot a couple of times.

It sounds like it could be a hardware failure of the vibrator device. To test whether the problem is hardware or firmware related, if the phone has custom firmware, then perform a wipe data/factory reset and flash back to stock. If the problem persists, then it is very likely a hardware issue. If the phone is currently on stock, then perform a wipe data/factory reset and re-flash stock.

Vibration Problem
creepyncrawly said:
It sounds like it could be a hardware failure of the vibrator device. To test whether the problem is hardware or firmware related, if the phone has custom firmware, then perform a wipe data/factory reset and flash back to stock. If the problem persists, then it is very likely a hardware issue. If the phone is currently on stock, then perform a wipe data/factory reset and re-flash stock.
Click to expand...
Click to collapse
Thank you very much! I will follow the instructions that you have given.

Related

can`t recive calls in deep sleep

hii
sorry about my english i try to explain shortly
Phone in deep sleep, wont ring at all, it wont even show a missed call
If I wake the phone up and call it, phone rings almost instantly.
.Full wipe and re-install of ROM and I am getting the same crap.
I am completely back to stock, factory reset and all. The issue is still happening, if the screen is off and phone is in sleep the device will not ring
i also odin'd the modems,kernels and same.
i dont have warrenty, there is something i can do?
help me plz!:crying:
yairalm said:
hii
sorry about my english i try to explain shortly
Phone in deep sleep, wont ring at all, it wont even show a missed call
If I wake the phone up and call it, phone rings almost instantly.
.Full wipe and re-install of ROM and I am getting the same crap.
I am completely back to stock, factory reset and all. The issue is still happening, if the screen is off and phone is in sleep the device will not ring
i also odin'd the modems,kernels and same.
i dont have warrenty, there is something i can do?
help me plz!:crying:
Click to expand...
Click to collapse
Hmm ... should be modem-related.
Try to flash another modem (for your region + mobile carrier).
Then wipe cache and Dalvik cache and fix permissions if you have CWM.
Have you changed the development settings?
Or energy saving?
Or have you a task killer app installed?
Good luck !
It_ler said:
Hmm ... should be modem-related.
Try to flash another modem (for your region + mobile carrier).
Then wipe cache and Dalvik cache and fix permissions if you have CWM.
Have you changed the development settings?
Or energy saving?
Or have you a task killer app installed?
Good luck !
Click to expand...
Click to collapse
i flash 4 kind of modems the last is my carrier modem(ki2)
now i on stock (lpd) with no app insttalled and i didnt tauch development setting.
you have more idea?

[Q] Please you can help me with my problems with i9100?

Ok,from the beginning i want to tell my story with that phone. I bought him from a friend with a normal price and hadn t no problem at all,but upon a few weeks suddenly the home button starts to have a delay of 5-10 seconds,the proximity sensor exactly like home button (delay) ,the screen didnt rotate ,but the autorotation is activated,and when i want to do a calibration of this sensor,stuck a minute or two and after say that is calibrated but nothing happens . A week ago, i root my phone and try a lot of custom roms,but nothing helped yet 3 days when i install Sensation Rom ,and miracle,for two days everything works like anything doest happend,but after it stuck again.. please help,what can i do? it s a file damaged,or is a hardware problem ? a lot of thanks
Iubirica said:
Ok,from the beginning i want to tell my story with that phone. I bought him from a friend with a normal price and hadn t no problem at all,but upon a few weeks suddenly the home button starts to have a delay of 5-10 seconds,the proximity sensor exactly like home button (delay) ,the screen didnt rotate ,but the autorotation is activated,and when i want to do a calibration of this sensor,stuck a minute or two and after say that is calibrated but nothing happens . A week ago, i root my phone and try a lot of custom roms,but nothing helped yet 3 days when i install Sensation Rom ,and miracle,for two days everything works like anything doest happend,but after it stuck again.. please help,what can i do? it s a file damaged,or is a hardware problem ? a lot of thanks
Click to expand...
Click to collapse
Hard to say.
Could also be a hardware issue.
I recommend to flash back stock ROM with stock kernel.
Maybe you have to wipe data (do factory reset).
Then check again.
Good luck !
It_ler said:
Hard to say.
Could also be a hardware issue.
I recommend to flash back stock ROM with stock kernel.
Maybe you have to wipe data (do factory reset).
Then check again.
Good luck !
Click to expand...
Click to collapse
I tried once to flash stock rom,with original kernel and modem,but i view another problem wich in custom rom dont appear,like ..i cant answer,the green or red slide its stuck and those problems even..i wipe a lot of times, i do factory reset ,but nothing..just,how works for those days when i install sensation,i dont know,its a mistery
Are you using micro-sd card ? if so remove it and turn the device on.
PsyOr said:
Are you using micro-sd card ? if so remove it and turn the device on.
Click to expand...
Click to collapse
i dont have a micro sd card
nothing?:|
Iubirica said:
nothing?:|
Click to expand...
Click to collapse
You've already done the extreme of reinstalling a stock ROM and performing a factory reset. I'm also assuming you didn't install a bunch of apps before the problem started, though.
My advice would be: go back to stock ROM again, factory reset, and SLOWLY reinstall your apps. This will help narrow down what app could be causing your issue. (if it is an app)
No bumping threads after 54 minutes. Not cool. People here aren't at your beck & call :-/
Iubirica said:
nothing?:|
Click to expand...
Click to collapse
ctomgee said:
You've already done the extreme of reinstalling a stock ROM and performing a factory reset. I'm also assuming you didn't install a bunch of apps before the problem started, though.
My advice would be: go back to stock ROM again, factory reset, and SLOWLY reinstall your apps. This will help narrow down what app could be causing your issue. (if it is an app)
Click to expand...
Click to collapse
Thanks..right now i will try your advice,and i come with a feedback
MistahBungle said:
No bumping threads after 54 minutes. Not cool. People here aren't at your beck & call :-/
Click to expand...
Click to collapse
sorry for that ,but this site is my only hope
i tried ..i put the stock rom without any apps installed.but i had the same problems..by example when i want to delete a widget from the screen the phone stucks a few seconds,and the came to normal..the home button had the same delay and the proximity sensor works with the same delay,when i want to close a call ,stays a 5-10 seconds to light up the screen..i dont know,what is with him,i m disperate
..and what is strange,by example when is on charge ,the home delay dissapeared,works normally,but the rest of the problems remain
comeone..nobody knows anything about my problems with phone?
1.send it to Samsung for warranty.
2.get your money back from "friend".
I think i had similar problems with you previously, even worse maybe. Battery shows charging while cable is unplugged. Some of the time it pops up a warning message "Unstable Voltage". I did the same thing as you, flashing roms, wiping x " i forgot how many times", factory resetting X times and so on. What solved the problem for me was ;
-> i took out the battery
-> left phone untouched for several days
-> put the battery back -> charged till full
-> wipe data, factory reset, wipe battery stats, wipe cache,dalvik as well, FIX permissions
-> flash latest stock rom ( 4.0.4 at that time )
-> reboot phone
-> root again ( flashing stock rom loses root ) using CF-Root
-> reboot to CWM recovery
-> wipe data, factory reset, wipe cache,dalvik as well, FIX permissions
-> flash PA (Paranoidandroid ROM - please follow the instruction from OP post) via CWM
->wipe data, factory reset, wipe cache, FIX permissions
-> reboot phone
-> wait for apps updated and then reboot to recovery and FIX permission for the final time and VOILA!!
The phone works great up till this moment. Not sure if you gonna solve your issue with the way i did it but might worth the try. Nothing to lose anyway it seems as you were hardcore-ing flashing roms and wiping data and such. Good Luck!
Certainly that i hope this will be able to relieve you of the unnecessary distress.
alexct said:
I think i had similar problems with you previously, even worse maybe. Battery shows charging while cable is unplugged. Some of the time it pops up a warning message "Unstable Voltage". I did the same thing as you, flashing roms, wiping x " i forgot how many times", factory resetting X times and so on. What solved the problem for me was ;
-> i took out the battery
-> left phone untouched for several days
-> put the battery back -> charged till full
-> wipe data, factory reset, wipe battery stats, wipe cache,dalvik as well, FIX permissions
-> flash latest stock rom ( 4.0.4 at that time )
-> reboot phone
-> root again ( flashing stock rom loses root ) using CF-Root
-> reboot to CWM recovery
-> wipe data, factory reset, wipe cache,dalvik as well, FIX permissions
-> flash PA (Paranoidandroid ROM - please follow the instruction from OP post) via CWM
->wipe data, factory reset, wipe cache, FIX permissions
-> reboot phone
-> wait for apps updated and then reboot to recovery and FIX permission for the final time and VOILA!!
The phone works great up till this moment. Not sure if you gonna solve your issue with the way i did it but might worth the try. Nothing to lose anyway it seems as you were hardcore-ing flashing roms and wiping data and such. Good Luck!
Certainly that i hope this will be able to relieve you of the unnecessary distress.
Click to expand...
Click to collapse
i tried to do all things that you sayed to me,without to leave the phone with no battery several days..dand nothing happend,the problems persist ..i dont know ,i dont have a guarantee,and the cost may be high,thanks anyway
UP
Your friend clearly sold you a dodgy phone. You should demand your money back and use the phone to beat him until he pays. That is my diagnosis and clearly the answer to your "problem".
today after wipe everything and flash de jelly bam rom ,custom kernel etc..doesnt work at all,but i removed the battery for 30 minutes,and when i put it back and openned it ,everything works very well..just a calibrate,and clearly now have no problems..how long it mentain,i dont know,but even now i dont know what it had .. mistery
so,what are you thinking,what is the cause?

[Q] Sound delay and lags

Dear all!
Two or three weeks ago I have started expecting some annoying problem. Not sure what is the source but whatever.
During incoming call with disabled screen there are some lags/breaks with call sound and even vibration up to enabling screen. The call sound is built-in so it is not due to extcard problems.
I am expecting almost the same when playing music by any player - from stock to Poweramp: when screen comes off the sound is terrible: it breaks a lot. Enabling screen eliminates the problem.
The problem is completely absent with stock radio player.
Enabling/disabling locking and/or energy saving mode does not affect - the problem persists.
I have tried to remove any modification excepts root: I have installed stock XXEMA2 with wiping dalvik - it doesn't help.
Do you have any idea what can be the source of problem and how to solve it? Please do not recommend data wipe (I expect it is the first idea for everyone )
Do you have any idea what can be the source of problem and how to solve it? Please do not recommend data wipe (I expect it is the first idea for everyone
No usually is to post here then get told to factory reset .
Personally i would backup data format system cache data sd card in recovery .
Flash the correct stock rom for your phone and test .
Fails then remove root traces and return to a service centre .
Or don't wipe data/ factory reset and just return to service .
jje
As far as I see the problem is only software/firmware based. It is not due to hardware or the problem would be constant disregard display status.
So I would be very happy to see some ideas what software/hardware parameters can influence on this.
I found the source of problem. It was caused by god damned DX Battery Saver 3.0.0 (previous versions were OK).
The topic can be closed now.

Vibrate mode doesn't work anymore

Vibrate mode on my phone doesn't work anymore. What I want is to just have sound on sound mode and just have vibrate on vibrate. Now however, if I enable vibration in sound mode it will work in vibrate mode too but if i disable it it doesn't and acts just like mute. Sound and vibration option is greyed out in all but sound modes. I tried all I could think of in the settings but cant figure it out.
I run a stock rom, 4.1.2 jb.
I don't really like bumping my topics but I have to since this is very annoying, I often have my phone on vibrate and need to be aware of incoming call/sms/email but it just doesn't work unless I change some settings every time.
I did wipe x x x from recovery but didn't help. (xxx= forgot names right now)
Factory reset or flash stock rom or return to service centre .
jje
JJEgan said:
Factory reset or flash stock rom or return to service centre .
jje
Click to expand...
Click to collapse
I've done factory reset and flashed with stock rom and service is my last option because I hate redoing all the settings, programs etc when phone is reset and just about finished after trying to fix this by doing before-mentioned things :|
I noticed when I have it on vibrate and get IM in skype it does vibrate, but still doesn't for SMS/call.

S3 Help Needed! Broken ribbon?

Hi guys, recently my S3 started to play up on me. The screen started to flicker and would only stop when I touched (and held) the screen. From then, things have gone from bad to worse and the phone now features a completely black screen after it is powered on. Therefore I cannot see the startup animation or anything else (including the home screen etc) but can hear the notifications and vibrations.
I can fortunately use CWM as this is not effected at all and the screen works perfectly fine. I have flashed 3 different roms and wiped my whole device since the problem started hoping it was a software problem.
I have additionaly tried:
- Clear the Dalvick Cache
- Clear cache
- Wipe data/factory reset
- Wipe all SD card data (don't ask)
Hopefully someone can help I would really appreciated it. (Not enjoying using the old Symbian phone atm) :crying:
Thanks
Make sure you are flashing roms meant for your version of the device.Try changing kernel or flash the latest stock firmware available after a factory reset. This should replace every file on your phone. Any problem would be fixed by this. Secondly what CWM do you use? Is it touch? If so does the touch work? Not likely a panel issue if the display is working in CWM, Can be a digitizer issue causing the screen to act up.

Categories

Resources