Related
Pac 4.4Beta won't install in TWRP 2.6.1. I get an error message saying that is was unable to mount the boot partition. Is there something else i need to do before i can install this?
I'd suggest you try using TWRP v2.6.3.1 or later.
TWRP 2.6.3.1
Can someone post a download link or a link to the thread for the recovery?
Modded Darts said:
Can someone post a download link or a link to the thread for the recovery?
Click to expand...
Click to collapse
Flashable zip for TWRP v.2.6.3.1 is available at https://www.mediafire.com/folder/xjwc1a482a6ll/Nook_Tablet.
If you'd like to use a later version of TWRP, see http://forum.xda-developers.com/showpost.php?p=49111924&postcount=8 for pointers on how to create a flashable zip for TWRP.
Hello,
I have Huawei MediaPad 7 Youth 2. I builded a CWM 6.0 from CM10.2 repositories. When i apply update.zip via recovery, its going to middle , then loading and then says "installation failed" without any more informations. How to get more infos?
Thanks
GAMELASTER said:
Hello,
I have Huawei MediaPad 7 Youth 2. I builded a CWM 6.0 from CM10.2 repositories. When i apply update.zip via recovery, its going to middle , then loading and then says "installation failed" without any more informations. How to get more infos?
Thanks
Click to expand...
Click to collapse
So, you're trying to flash an update.zip with your CWM on the stock recovery? This would explain it, as you can not install updates not signed by Huawei in the stock recovery.
es0tericcha0s said:
So, you're trying to flash an update.zip with your CWM on the stock recovery? This would explain it, as you can not install updates not signed by Huawei in the stock recovery.
Click to expand...
Click to collapse
Well, maybe u are right. Actually, im new to this.
But, when i updating a Signed recovery, its going to middle, then loading bar and installation failed. Unsigned package is at start failed.
Well, how to flash it? I have available just root, and fastboot i cant execute (when i holding volume up and power, its just boot up a tablet). Is another way to flash it? (inside android or how?)
And another question, where i can test my recovery if is something broken or similiar to be secured?
Thankie
http://forum.xda-developers.com/android/development/alpha-clockworkmod-huawei-mediapad-7-t2967318
Some info there and a link to another site that claims to have recovery working and a LP rom. Definitely proceed with caution and make sure you have access to the original firmware and know how to reload before you proceed. Good luck.
es0tericcha0s said:
http://forum.xda-developers.com/android/development/alpha-clockworkmod-huawei-mediapad-7-t2967318
Some info there and a link to another site that claims to have recovery working and a LP rom. Definitely proceed with caution and make sure you have access to the original firmware and know how to reload before you proceed. Good luck.
Click to expand...
Click to collapse
Okey, thank you. But you think, this will be work too on Youth 2 too?
Ah, my mistake! I thought it was the same one. Don't try that then. Lol
I accidentally flashed TWRP to the boot instead of recovery. Whenever I turn on the phone it goes straight to TWRP. As it stands the phone is unsuable! AS far I understand it the way to fix this is to flash the phone's original boot.img to the boot. Is this correct? If so my phone is MT2L03 with the 5.1 update. Does anynone know of any link or could anyone PLEASE share their stock boot.img with me. I really need help!
Thank You.
Boot image is part of OS. If you want to install CM12, while you are in twrp, just transfer the cm12 rom and gapp from pc to your sdcard, then flash both. You get complete cm12 with its boot image.
But if you want stock boot image back, you can just flash the stock firmware using the 3 button boot. It is available in the "official stock firmware" section in the INDEX page: http://forum.xda-developers.com/showthread.php?t=3149530
If you have difficulties doing that, let us know. I maybe can find it somewhere, but to be honest, I don't use stock anymore once CM is out.
Thanks. CM12 flash problem
I was able to find a b321 boot.img online so problem solved. The cm 12 flash is not working for me I keep getting an error while flashing TWRP keeps telling me that the cm 12.1mt2 file is specifically for the b322 bootloader but that my bootloader is "unknown" so its unable to flash.
Still haven't figured out what the problem is. I tried to install the specific 2.8.7.0 TWRP for the mt2l03 via the app but it gives me an error. When I try to flash it in recovery it still has no effect on the cm install. Maybe someone would be kind enough to guide me.
fcbfan2k said:
I was able to find a b321 boot.img online so problem solved. The cm 12 flash is not working for me I keep getting an error while flashing TWRP keeps telling me that the cm 12.1mt2 file is specifically for the b322 bootloader but that my bootloader is "unknown" so its unable to flash.
Still haven't figured out what the problem is. I tried to install the specific 2.8.7.0 TWRP for the mt2l03 via the app but it gives me an error. When I try to flash it in recovery it still has no effect on the cm install. Maybe someone would be kind enough to guide me.
Click to expand...
Click to collapse
Try reading the OP for that ROM. It clearly states you have to be in b322.... Reading is key.
Moody66 said:
Try reading the OP for that ROM. It clearly states you have to be in b322.... Reading is key.
Click to expand...
Click to collapse
i do have b322. So the problem is not that. the problem was already there even before i booted with the b321.img. In any case the img is for boot only. It is not the build.
Also twrp, have you install the twrp listed in that same page? other twrp version doesn't work.
Edit, saw you mentioned already that install twrp error using app. So try install the correct twrp in bootloader.
fcbfan2k said:
i do have b322. So the problem is not that. the problem was already there even before i booted with the b321.img. In any case the img is for boot only. It is not the build.
Click to expand...
Click to collapse
If you flashed b321 boot image you are not on b322 boot... And the correct twrp is found in the same OP....
I recently bought Teclast Master T10 Tablet but I can't find any way to root it.
I googled this, but the problem is that there is no TWRP for this device, so I can't flash Magisk.
Any idea or guide would be really appreciated!
Thank you all in advance!
konstantinos3 said:
I recently bought Teclast Master T10 Tablet but I can't find any way to root it.
I googled this, but the problem is that there is no TWRP for this device, so I can't flash Magisk.
Any idea or guide would be really appreciated!
Thank you all in advance!
Click to expand...
Click to collapse
here. I think you need to be registered https://translate.google.com/translate?depth=1&hl=en&rurl=translate.google.com&sl=ru&sp=nmt4&tl=en&u=https://4pda.ru/forum/index.php%3Fshowtopic%3D841203%26view%3Dfindpost%26p%3D66359338
Maybe someone can upload the files from that russian site to another file sharing site so we can get them. Thank you!
You can use the 4PDA android app to register and download. I was able to root my Teclast T10 just now. If you have a location where to upload the files I can do that as well.
TWRP for Teclast T10:
https://cloud2.zoolz.com/s-hd3KCVJg
Where can I find scatter file for flashing with spflashtool?
Or is there another way to flash the twrp recovery?
We cant flash without the scatterfile. Maybe it will get uploaded soon.
---------- Post added at 01:38 PM ---------- Previous post was at 01:33 PM ----------
We have a new rom here, but cant download it.... https://pan.baidu.com/s/1jIzPU8Q
T10 (E3C5)-Android7.0-V1.28-A320.rar
Scatter file
Here is is the scatter file.
Just noticed there is a new OTA available through TeclastOTA. What would be the steps to get this OTA installed?
It is IMPORTANT to flash also SuperSu in TWRP!
Otherwise BootLoop!
Phuturist said:
Just noticed there is a new OTA available through TeclastOTA. What would be the steps to get this OTA installed?
Click to expand...
Click to collapse
I have updated before flashing TWRP.
Anyone tried to update with TWRP and or Root?
Maybe it will help to flash stock Boot.img and Recovery.img from latest Version (before Update) from Needrom.
Could anyone post a guide to root Teclast T10? Is this guide correct?
How to root telcast t10
Can anyone please give me a step by step guide of how to root telcast t10 or at least remove everything to making it stock OS.
Thanks
nJoy-Android said:
I have updated before flashing TWRP.
Anyone tried to update with TWRP and or Root?
Maybe it will help to flash stock Boot.img and Recovery.img from latest Version (before Update) from Needrom.
Click to expand...
Click to collapse
First tried without doing anything extra. TeclastOTA boots into TWRP recovery and is not able to upgrade. I tried flashing the original boot and recovery afterwards but was unable to boot, it got stuck on the Teclast logo. You could probably flash the clean factory rom will become available on needrom but I don't wanna lose all my data.
Phuturist said:
Just noticed there is a new OTA available through TeclastOTA. What would be the steps to get this OTA installed?
Click to expand...
Click to collapse
konstantinos3 said:
Could anyone post a guide to root Teclast T10? Is this guide correct?
Click to expand...
Click to collapse
Of course, it's ok.
In Russia forum they told to format data in recovery.
Otherwise you don't see any data with TWRP.
Worked for me.
Don't forget to flash also SuperSu or magisk, otherwise the system won't boot...
konstantinos3 said:
Could anyone post a guide to root Teclast T10? Is this guide correct?
Click to expand...
Click to collapse
That's the one I followed and which works of you have the correct scatter and recovery.img as posted in this topic. I flashed Magisk instead of SuperSU though.
Phuturist said:
First tried without doing anything extra. TeclastOTA boots into TWRP recovery and is not able to upgrade. I tried flashing the original boot and recovery afterwards but was unable to boot, it got stuck on the Teclast logo. You could probably flash the clean factory rom will become available on needrom but I don't wanna lose all my data.
Click to expand...
Click to collapse
Maybe it goes through, if you unroot before.
Because SuperSu make changes in System Partition.
Or you can flash also factory System Partition too.
nJoy-Android said:
Of course, it's ok.
In Russia forum they told to format data in recovery.
Otherwise you don't see any data with TWRP.
Worked for me.
Don't forget to flash also SuperSu or magisk, otherwise the system won't boot...
Click to expand...
Click to collapse
The reason I ask is that I have done the OTA Update today.
Are these TWRP and scatter file compatible?
konstantinos3 said:
The reason I ask is that I have done the OTA Update today.
Are these TWRP and scatter file compatible?
Click to expand...
Click to collapse
I have used this TWRP
http://www.mediafire.com/file/5q650gcdcu568v0/Teclast_T10.zip
The scatter from previous post (extracted from Needrom V1.24)
And SuperSu or Magisk
nJoy-Android said:
I have used this TWRP
http://www.mediafire.com/file/5q650gcdcu568v0/Teclast_T10.zip
The scatter from previous post (extracted from Needrom V1.24)
And SuperSu or Magisk
Click to expand...
Click to collapse
Thank you!
Did you firstly get the OTA Update and afterwards you flashed TWRP and root?
In the Russian forum say that "Recovery compiled on the basis of the kernel firmware Android 7.0 version V1.24 / Wed Oct 11 20:24:36 CST 2017 "
After today's Update the kernel version is V.1.28_20171120
TWRP Official Recovery for A20 and A20e
Developed and maintained by @Topser99
SM-A205xxx
Download TWRP for a20
Download TWRP Open Recovery for a20
dl.twrp.me
SM-A202F/K
Download TWRP for a20e
Download TWRP Open Recovery for a20e
dl.twrp.me
Also available for installation via the Official TWRP app from Playstore
Hmm, https://dl.twrp.me/a20dd/ leads me to a 404 error. Any new link?
CawfeeOG said:
Hmm, https://dl.twrp.me/a20dd/ leads me to a 404 error. Any new link?
Click to expand...
Click to collapse
Found the new link I believe: https://dl.twrp.me/a20
However no matter what I try, I am getting an error after flashing in Oodin and trying to reboot to recovery manually.
The error is in download mode:
Code:
Recovery: Error validating footer. (Something cut off here because of the A20's front camera)
CUSTOM RECOOVERY
VBMETA A205WVLS7BUA1, 37649171R
Any idea how to proceed? I'm flashing AP via the .tar version of TWRP in Odin from stock Android Q for my region
CawfeeOG said:
Found the new link I believe: https://dl.twrp.me/a20
However no matter what I try, I am getting an error after flashing in Oodin and trying to reboot to recovery manually.
The error is in download mode:
Code:
Recovery: Error validating footer. (Something cut off here because of the A20's front camera)
CUSTOM RECOOVERY
VBMETA A205WVLS7BUA1, 37649171R
Any idea how to proceed? I'm flashing AP via the .tar version of TWRP in Odin from stock Android Q for my region
Click to expand...
Click to collapse
@Topser99
CawfeeOG said:
Found the new link I believe: https://dl.twrp.me/a20
However no matter what I try, I am getting an error after flashing in Oodin and trying to reboot to recovery manually.
The error is in download mode:
Code:
Recovery: Error validating footer. (Something cut off here because of the A20's front camera)
CUSTOM RECOOVERY
VBMETA A205WVLS7BUA1, 37649171R
Any idea how to proceed? I'm flashing AP via the .tar version of TWRP in Odin from stock Android Q for my region
Click to expand...
Click to collapse
If you can't extract and re-compress the files yourself, then you don't have to use them, and that's my opinion.
Topser99 said:
If you can't extract and re-compress the files yourself, then you don't have to use them, and that's my opinion.
Click to expand...
Click to collapse
What do you mean extract and re-compress? The guide over here mentions nothing about needing to re-compress or extract anything.
Edit: To anyone stuck like myself. I solved it with this guide: https://forum.xda-developers.com/t/...-q-complete-guide-for-the-a20-a205xx.4095589/
My guess is it's something to do with vbmeta.img and boot.img not being included with the new TWRP tar. should Re-compressing a new tar file with those files included in the tar as recovery.tar might solve the issue, though I cannot verify as I'm fine with the working older TWRP.
I am following what is said under "Odin Install Method (No Root Required)" mentioned on this page.
Samsung Galaxy A20
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
There's no reason to be rude when I'm following the directions and trying to get assistance for something that has once gone smoothly for me in the past, but ok you do you, boo.
CawfeeOG said:
What do you mean extract and re-compress? The guide over here mentions nothing about needing to re-compress or extract anything.
Edit: To anyone stuck like myself. I solved it with this guide: https://forum.xda-developers.com/t/...-q-complete-guide-for-the-a20-a205xx.4095589/
My guess is it's something to do with vbmeta.img and boot.img not being included with the new TWRP tar. should Re-compressing a new tar file with those files included in the tar as recovery.tar might solve the issue, though I cannot verify as I'm fine with the working older TWRP.
I am following what is said under "Odin Install Method (No Root Required)" mentioned on this page.
Samsung Galaxy A20
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
There's no reason to be rude when I'm following the directions and trying to get assistance for something that has once gone smoothly for me in the past, but ok you do you, boo.
Click to expand...
Click to collapse
Is there a reason? It doesn't matter. But you have to learn for yourself. That is important, we are not thinking to help you forever.
Topser99 said:
Is there a reason? It doesn't matter. But you have to learn for yourself. That is important, we are not thinking to help you forever.
Click to expand...
Click to collapse
Knowledge is to be passed on, not to be kept to oneself forever.
Trust me, if I didn't make attempts at figuring it out myself, I wouldn't have bothered asking questions. I also ask questions to avoid breaking my devices, as I'm not one who can just go buying a new phone whenever I please.
I may be the first one asking questions about this, but I won't be the last. Maybe create a better-worded guide and you won't have to deal with such people.
Which Twrp should i use for SM-A205F_A205FXXU3ASJ2 running one UI 3.1
@Topser99 any idea ?
suriyaraj said:
Which Twrp should i use for SM-A205F_A205FXXU3ASJ2 running one UI 3.1
@Topser99 any idea ?
Click to expand...
Click to collapse
I am looking for that too but I couldn't find any answer . If you find out the answer can you pls tell me plsssss
physwizz said:
TWRP Official Recovery for A20 and A20e
Developed and maintained by @Topser99
SM-A205xxx
Download TWRP for a20
Download TWRP Open Recovery for a20
dl.twrp.me
SM-A202F/K
Download TWRP for a20e
Download TWRP Open Recovery for a20e
dl.twrp.me
Also available for installation via the Official TWRP app from Playstore
Click to expand...
Click to collapse
guys everytime i flash it just gives Error validating footer CUSTOM RECOVERY
shadowhansen1 said:
guys everytime i flash it just gives Error validating footer CUSTOM RECOVERY
Click to expand...
Click to collapse
Try here
TWRP 3.4 and 3.5 for A20
@Topser99 has provided us with some newly modified recoveries. They all have TWRP 3.4 and also now 3.5 ⇨NewUpdate -update kernel By : @physwizz Follow : @ULtimaTe_Pie2 Follow :mad:Galaxy_A20_official System and System_root...
forum.xda-developers.com
physwizz said:
Try here
TWRP 3.4 and 3.5 for A20
@Topser99 has provided us with some newly modified recoveries. They all have TWRP 3.4 and also now 3.5 ⇨NewUpdate -update kernel By : @physwizz Follow : @ULtimaTe_Pie2 Follow :mad:Galaxy_A20_official System and System_root...
forum.xda-developers.com
Click to expand...
Click to collapse
for a20e
shadowhansen1 said:
for a20e
Click to expand...
Click to collapse
AstrakoBot in Galaxy A20/A20e Official📱
t.me
CawfeeOG said:
Knowledge is to be passed on, not to be kept to oneself forever.
Trust me, if I didn't make attempts at figuring it out myself, I wouldn't have bothered asking questions. I also ask questions to avoid breaking my devices, as I'm not one who can just go buying a new phone whenever I please.
I may be the first one asking questions about this, but I won't be the last. Maybe create a better-worded guide and you won't have to deal with such people.
Click to expand...
Click to collapse
i found a workaround in this, i kept having that error too
download the recovery from the post above from @physwizz (https://forum.xda-developers.com/t/twrp-official-recovery-for-a20-and-a20e.4267815/post-86192489), and the latest official TWRP recovery, pick up the vbmeta.img inside the compressed .tar from the first one and put it inside the official TWRP compressed one.
It worked for me. (SM-A202F)
Drvaggensberg said:
i found a workaround in this, i kept having that error too
download the recovery from the post above from @physwizz (https://forum.xda-developers.com/t/twrp-official-recovery-for-a20-and-a20e.4267815/post-86192489), and the latest official TWRP recovery, pick up the vbmeta.img inside the compressed .tar from the first one and put it inside the official TWRP compressed one.
It worked for me. (SM-A202F)
Click to expand...
Click to collapse
great work
You can also do it by patching the full ap file and flashing that via odin before you use the official TWRP
physwizz said:
AstrakoBot in Galaxy A20/A20e Official📱
t.me
Click to expand...
Click to collapse
Hi i have this problem too but i cant open that link
gigi3000 said:
Hi i have this problem too but i cant open that link
Click to expand...
Click to collapse
Here
many, many thanks
Official twrp-3.7.0_9-0 is out for A205 on TWRP website.