Hi
i have a problem with my phone Galaxy S duos S7562 ! :
1- When i turn it off ! 90% of times when i try to re-turn on it stucks 3 seconds on the starting screen (galaxy s duos....etc ) then goes off ! so that i should every time pull the battery off and put it again to make it start normally ! this is the first problem.
2- when i put the charger on it it charges normally, when i pull of the charger the indication of charging still displayed untill i restart the phone .
can you help me plz ?
PS: Sorry i know i have a bad english i wish you understand my two problems
chegue4 said:
Hi
i have a problem with my phone Galaxy S duos S7562 ! :
1- When i turn it off ! 90% of times when i try to re-turn on it stucks 3 seconds on the starting screen (galaxy s duos....etc ) then goes off ! so that i should every time pull the battery off and put it again to make it start normally ! this is the first problem.
2- when i put the charger on it it charges normally, when i pull of the charger the indication of charging still displayed untill i restart the phone .
can you help me plz ?
PS: Sorry i know i have a bad english i wish you understand my two problems
Click to expand...
Click to collapse
I think you should try your luck with backing up all your stuff and flashing stock Rom !
Stock Rom
I Think First The Kernal Or Rom Is Unstable Try Flashing Stock Rom ...
After Doing This If Problem Solved Then Try Other Rom Nd Install It Perfectly if u want as it was Not Installed Pecrfectly last Time.
If Problem Continues Then Its Must Be Hardware Problem...
This Can Also Happen If Water Has Entered Ur Phone ....
Solution
The main causes of bootloop are listed below:
1.Flashing multiple tweaks
2.Changing custom ROMs without reading the procedure
3.Flashing Kernels one over the other
The following kernel order is placed on general forum for my phone but maybe you can try it too but I don't take responsibility for any damage occuring to your phone:
1).If you are on stock kernel:
you can flash any kernel without bricking your phone...
2). If you are on savie kernel:
1)Stock on savie -- ok
2)white kernel on savie-- ok(you will not get soft bricked but may get busybox problem)
3) hells kernel on savie--ok
4) devient kernel on savie--ok
5) merruk kernel on savie -- ok
6) black reactor kernel on savie--ok
7) kuro kernel on savie-- ok
3) if you are on white kernel:
1) stock kernel on white-- no
2)hells kernel on white-- no
3) savie kernel on white --ok
4) merruk kernel on white --ok(but it is better to flash stock kernel via odin)
5) black reactor kernel on white--no
6) devient kernel on white-- no
7) kuro kernel on white -- no
If you are on merruk kernel:
1) stock kernel on merruk--no
2) white kernel on merruk--ok
3) all other kernel : no
If you are on hells kernel:
All kernels except merruk kernel ....
1) If you are on kuro kernel:
1) Stock kernel on kuro -- ok
2) savie kernel on kuro -- ok
3) white kernel on kuro -- NO
4) merruk kernel on kuro-- NO
5) devient kernel on kuro -- ok
6) black reactor on kuro -- ok
2) if you are on devient kernel:
1) stock kernel on devient-- ok
2) savie kernel on devient --ok
3) white kernel on devient-- ok (but may get busybox problem)
4) merruk kernel on devient -- ok
5) hells kernel on devient--ok no brick (but i got bootloop problem rom-jellynoid)
6) black reactor kernel on devient --ok
7) kuro kernel on devient --ok
3) If you are on Jarvis kernel:
1)White kernel over Jarvis -- ok
2) hells kernel over Jarvis -- OK
3) all other kernels -- NO
4) If you are on Percy cm#2 :
1)Hells kernel over Percy -- OK
2) savie kernel over Percy -- ok
All other kernel -- NO
I don't know whether you have these kernels for your phone. If yes, then you can use it.
Solution:
1. Flash kernel before you flash a ROM.
2. Don't use multiple tweaks. Select the one or two which is the best ones and also compatible.
3. Reflash Stock Kernel and Stock ROM.
Hi
I rooted my s duos with unlock root pro software. I want to install cwm nd custom rom without pc. What is the best rom available. If I install custom rom means shall I move app to sd. Suggest me some apps that records two ways call.
Thanks
Sent from my GT-S7562 using XDA Premium 4 mobile app
Recommend
vino.rk said:
Hi
I rooted my s duos with unlock root pro software. I want to install cwm nd custom rom without pc. What is the best rom available. If I install custom rom means shall I move app to sd. Suggest me some apps that records two ways call.
Thanks
Sent from my GT-S7562 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It is recommended to have a backup of all your data before you proceed. I am telling this from my experience. I am using Samsung Galaxy Y GT-S5360 mobile. You can download the CWM and custom ROM through mobile. Installing a custom rom doesn't allow you to move your apps to sd. You should need to create a second partition in sd card and link it with internal memory using link2sd. If you create second partition, you will lose all the data stored in sd card. Search on google play with keyword: call recorder.
Please press thanks if I have helped you. Also I don't know much about your phone.
Related
Hello everybody, after the installation of the ROM tw008 and custom kernel 3.60 photos does not register and video does not work , somebody would have a solution?
I test all the goro's kernel and its always the same problem . Please help me!!
vinss68 said:
I test all the goro's kernel and its always the same problem . Please help me!!
Click to expand...
Click to collapse
I really want to help but unfortunately i don't know what to help you on:
But:
1: Did you install the ROM/kernel properly?
2: Did you try re-installing?
3: Did you try flashing stock firmware than Wolfbreak's ROM.
4. Did it work on stock kernel?
5. DID YOU MAKE SURE YOU DOWNLOADED THE RIGHT 3.60 KERNEL BECAUSE GORO PUT THE WRONG LINK? (oops caps)
Download the goro kernel again and flash it HERE
Hope this helps
Hello thank you for your reponse, indeed I tried some thing, and with the good kernel .
I have try:
- to make a fresh instalation of bb.67 and of the ROM tw008, then of the custom kernel 360 (by trying all the camera resolution, and play on frequence cpu, anything has to make its not working). I have not try to make a fresh installation of firmware via SEUS (I try it now!!)
-Camera is completely functional with the stock kernel , with z's custom kernel (22,23,05) and with custom kernel 3.47 when i was on tw7 bb52, but I prefere the ck 360 for the underclock and bb.67
- with and without the theme which I use
And camera make always her tantrums
Well I try the fraiche installation firmware and I informed
Works fine for me and everyone else using it...
Must be something you're doing
Just for information if it can help to resolve the problem, when I takes a photo the image gallery makes an black screen and when I want to pass in video mode the application makes a sudden closure
always similar after a full fresh installation of all.... i don't know what's the problem. i think i will wait a future kernel with underclocking and stay with z's kernel for the moment ,but if anyone got a idea or question about situation ...
vinss68 said:
always similar after a full fresh installation of all.... i don't know what's the problem. i think i will wait a future kernel with underclocking and stay with z's kernel for the moment ,but if anyone got a idea or question about situation ...
Click to expand...
Click to collapse
you might be flashing the wrong version of the kernel for your rom....
it's strange because all working fine, just this problem with camera . i trying to reorganize my sd card she's in a mess... maybe it's the cause of my problem.
some opinion?
I don't think its related to the rom or custom kernel. I've had this problem on some of the custom roms I've tried. What ultimately fixed it for me is by formatting the sd card so make a backup of your entire sd card then format it.
Sent from my X10x using XDA App
Good news,
my problem is resolved. Yesterday evening I completely cleaned my card sd then I left the telephone have it reconfiguré. I remake fresh installation rom tw008 and of the custom kernel 360 and hop all work fine. I think that the problem came because I tested several applications camera,background which created several files for photos,images, because which never clean .i am finally going to be able to take advantage of quite its hey hey.
Thx all to be interested in you has my case and sorry for my bad english
Dian Xin rom is developed by another Chinese Company (similar to MIUI). It is based on CM7.
The official sites: http://www.dianxinos.com/?lang=en
Forum: http://bbs.dianxinos.com/forum.php
This rom is ported using FXP's CM7 and the dianxin rom for N1 12031517
It is flashed via xRecovery. If your rom uses CWM only then you have to install doomlord's bootmanager to flash it.
Credits:
1. Z & J, doomlord, azuzu - for too many things to mention
2. DXROM Team - for the rom that I use as base
3. Tkymgr aka Goro - for the kernel
4. All X10 devs - for keeping the phone alive
5. All rom users - for testing and helping each other. the rom won't be complete without your valuable feedback
Links (do not mirror):
http://www.mediafire.com/?im0y16q4ob8xpf1
md5sum - c7e9ddd979d8d43d2488d00893399954
Rom is flashed via xRecovery
Instructions For Locked BL users
- this method also applies to Unlocked BL users whose kernel is SE Based (Doomlord's bootmanager 1.3 or my SE kernel with dual recoveries)
1. Do a backup
2. Do a factory reset in xRecovery
3. Flash the main rom: http://www.mediafire.com/?im0y16q4ob8xpf1
4. Flash hotfix 01: http://www.mediafire.com/?fipu6wsjzptz98w
5. Reboot
Instructions For Unlocked BL users (thanks to TimChew)
1. Do a backup
2. Power off the phone and flash your chosen kernel using Flashtool from here: http://forum.xda-developers.com/showthread.php?t=1345913
3. Power On the phone and boot into xRecovery
4. Do a factory reset
5. Flash the main rom: http://www.mediafire.com/?im0y16q4ob8xpf1
6. Flash hotfix 01: http://www.mediafire.com/?fipu6wsjzptz98w
7. Flash the wifi module if you are not using Free Kernel (download the module from the kernel thread)
8. Flash the UnlockedBL.zip (attached)
9. Reboot
hotfix 01 (flash with xRecovery)
Link: http://www.mediafire.com/?fipu6wsjzptz98w
md5sum: fc2d473ead9bdefb65b44d5f6a6fa280
- include changes from DXROM 120322
- fix camera (thanks to M&M team's camera fix)
Workings:
- Pretty much everything as FXP CM7
Not working / Bugs:
- please report
Notes:
1. The rom is from China. So some of the apps are in Chinese.
2. Do not ask me for language pack as I don't know how. If somebody wants to do it I'd appreciate very much.
3. X10 is not my main phone now. And due to my busy work schedule, I may not be able to come here very often. So please help each other. Especially to the newcomers.
4. If you like it please hit the Thanks button. Or you can buy me a beer
reserved ---
reserved again
wow, this is something new. definetly gonna try and report. Thx
First boot may take some time. If the screen turns off after bootanimation and the LED lights up, press Home button to show the lock screen.
full wipe...stuck on bootanimation only..locked BL
aval1392 said:
full wipe...stuck on bootanimation only..locked BL
Click to expand...
Click to collapse
Make sure you do the factory reset. I tested several times before posting.
Which bootanimation? The XDA Developer logo or the rom bootanimation?
If it's the rom bootanimation then the boot up time will take a while (about 5 minutes). And the screen will go to sleep. You have to press home button to wake it up.
and check the md5sum
c7e9ddd979d8d43d2488d00893399954
cobrato said:
Make sure you do the factory reset. I tested several times before posting.
Which bootanimation? The XDA Developer logo or the rom bootanimation?
If it's the rom bootanimation then the boot up time will take a while (about 5 minutes). And the screen will go to sleep. You have to press home button to wake it up.
and check the md5sum
c7e9ddd979d8d43d2488d00893399954
Click to expand...
Click to collapse
install the ROM
but it seems to be stucked at ROM boot animation
its been 5 minute on boot animation still waiting to get started..........
i already flashed all u told in the OP
m on ULBL doomkernel full OC version
ny suggestion????
Do i need to flash fxp based Kernel?????
cobrato said:
Make sure you do the factory reset. I tested several times before posting.
Which bootanimation? The XDA Developer logo or the rom bootanimation?
If it's the rom bootanimation then the boot up time will take a while (about 5 minutes). And the screen will go to sleep. You have to press home button to wake it up.
and check the md5sum
c7e9ddd979d8d43d2488d00893399954
Click to expand...
Click to collapse
Thanks it worked...waited 5+ mins
x10forevers said:
install the ROM
but it seems to be stucked at ROM boot animation
its been 5 minute on boot animation still waiting to get started..........
i already flashed all u told in the OP
m on ULBL doomkernel full OC version
ny suggestion????
Do i need to flash fxp based Kernel?????
Click to expand...
Click to collapse
i think it should work on dooms OC version or try downloading the doom version which Cob has modded in the link he specified in OP and try using with it !! its not specific for FXP only as u can see the list of kernels in the link provided in OP
Any reviews for this rom?
Whooo cob is back. Now I did tried to install per Op but was stuck at the bootanimation for10 min. I have locked bootloader and an on baseband 2.1.71 and 2.6.29 modFXP doonkernel v06-1113.
I tried couple of time did a clean install but got stuck at the rom boot animation not dooms animation
Sent from my X10S using XDA
stanzzzzz said:
Whooo cob is back. Now I did tried to install per Op but was stuck at the bootanimation for10 min. I have locked bootloader and an on baseband 2.1.71 and 2.6.29 modFXP doonkernel v06-1113.
I tried couple of time did a clean install but got stuck at the rom boot animation not dooms animation
Sent from my X10S using XDA
Click to expand...
Click to collapse
If you are on locked BL how can you flash doom kernel?
If you are on unlocked BL you have to use the kernel link I provide in OP. Doom's v06 is for stock SE rom only.
what camera app it's used, semc original, or miui like ? tks for your work.
The UI is not nice . I like MIUI more.
From screenshots seems a very beautiful rom.I have to test it and I hope to hasn't any bug.
pixule said:
what camera app it's used, semc original, or miui like ? tks for your work.
Click to expand...
Click to collapse
camera app is miui like !! tried taking pics it clicks and shows green screen is it a bug or something i dunno !!
Miui themes work on it ?????
desspil said:
Miui themes work on it ?????
Click to expand...
Click to collapse
dint work for me ! doesnt work coz it uses DX theme launcher which doesnt support the mtz files of miui !! still u can find out again coz i have removed it !!
acerulz said:
dint work for me ! doesnt work coz it uses DX theme launcher which doesnt support the mtz files of miui !! still u can find out again coz i have removed it !!
Click to expand...
Click to collapse
Ok, thanks for reply !
Hey guys, I am using CHAOS Rom as primary on Goggy Max kernel 1.6.8. I want to dual boot with Resurruction Remix. Just to see how the ROM feels like.. I want to test other ROMS on dual boot. So i followed these steps:
- Install 1st rom the usual way
- Flash Googy-Max Kernel
- Install stweaks from PlayStore
- Go to Dual Boot tab and reboot into 2nd rom utils (the phone should reboot immediately to "special recovery")
- On "special recovery" Go to dual boot options
- If it's the first time you install a 2nd rom, you must initialize the filesystem by wiping 2nd rom
- Always on "special recovery" Dual Boot options, flash all needed zips (Here i flashed the main rom zip and gapps and finally again the goggy-max kernel)
-
after i reboot into second rom.. it is very very slow.. it doesn't boot sometimes even.. zram is 800mb with 80% swappiness.. by the way the primary ROM works awesome..
any help is appreciated!!
rahulbalmuri said:
Hey guys, I am using CHAOS Rom as primary on Goggy Max kernel 1.6.8. I want to dual boot with Resurruction Remix. Just to see how the ROM feels like.. I want to test other ROMS on dual boot. So i followed these steps:
- Install 1st rom the usual way
- Flash Googy-Max Kernel
- Install stweaks from PlayStore
- Go to Dual Boot tab and reboot into 2nd rom utils (the phone should reboot immediately to "special recovery")
- On "special recovery" Go to dual boot options
- If it's the first time you install a 2nd rom, you must initialize the filesystem by wiping 2nd rom
- Always on "special recovery" Dual Boot options, flash all needed zips (Here i flashed the main rom zip and gapps and finally again the goggy-max kernel)
-
after i reboot into second rom.. it is very very slow.. it doesn't boot sometimes even.. zram is 800mb with 80% swappiness.. by the way the primary ROM works awesome..
any help is appreciated!!
Click to expand...
Click to collapse
Flash a different second ROM to see if it is a problem with your choice of ROM or not. 800MB zram is very laggy for me.
rootSU said:
Flash a different second ROM to see if it is a problem with your choice of ROM or not. 800MB zram is very laggy for me.
Click to expand...
Click to collapse
I tried flashing different ROM's Pardus HD and Fantasy ROM's .. same situation no change. So what Zram do u suggest ??
About 200 although that isn't going to solve the problem if these ROMs dont have 800MB set up as default within them.
Maybe best to ask in the Kernel thread
rahulbalmuri said:
I tried flashing different ROM's Pardus HD and Fantasy ROM's .. same situation no change. So what Zram do u suggest ??
Click to expand...
Click to collapse
Aren't they both on 4.2.2 base ?
sent from the state where marijuana is NOT illegal !
kangerX said:
Aren't they both on 4.2.2 base ?
sent from the state where marijuana is NOT illegal !
Click to expand...
Click to collapse
Pardus HD is 4.1.2 (MG6) No idea about the other.
rootSU said:
Pardus HD is 4.1.2 (MG6) No idea about the other.
Click to expand...
Click to collapse
yup pardus is the other one has both . just checked
Ask your GS Duos related problems here. Also, share this thread link with more S Duos users to help them sort out their issues.
View ALL S Duos developments here
Don't Forget to hit THANKS
Galaxy S Duos Rooted Kernel
Hi,
so i´m starting this
1st. Question:
I´m searching for an rooted kernel for my S Duos. I don´t need the cwm. I just want to speed up the phone with the stock rom. Are there any recommendations of kernels to use? How do i install them?
2nd Question:
Is there any simple solution to move the apps to the sd?
Thanks for your help. :good:
Greetz from GER
cruising6n said:
Hi,
so i´m starting this
1st. Question:
I´m searching for an rooted kernel for my S Duos. I don´t need the cwm. I just want to speed up the phone with the stock rom. Are there any recommendations of kernels to use? How do i install them?
2nd Question:
Is there any simple solution to move the apps to the sd?
Thanks for your help. :good:
Greetz from GER
Click to expand...
Click to collapse
Answer to first question- Checkout cheatMan's kernels on Thread named 'KyleOPEN Rom'..
answer to second question- U didn't heard about LINK2SD..? Download it from Play store..
Sent from my GT-S7562 using XDA Premium 4 mobile app
Hi.
I tried link2sd but it doesnt Work for me. Does it work On your s duos?
I ve flashed the kyleopen v5 kernel via Odin. but i don´t have superuser privileges....
Sorry i´m a noob....
Sent from my GT-S7562 using xda app-developers app
Try to root your device with this tool : Link--- [ http://forum.xda-developers.com/showthread.php?t=2239958 ]
Don't Forget a Thanks if it helped you..!
Sent from my GT-S7562 using XDA Premium 4 mobile app
cruising6n said:
Hi.
I tried link2sd but it doesnt Work for me. Does it work On your s duos?
I ve flashed the kyleopen v5 kernel via Odin. but i don´t have superuser privileges....
Sorry i´m a noob....
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
link2sd works perfect on s duos, have you create an ext4 partition in external sdcard? insert the card in a card reader and connect to the pc, use minitool partition wizard to create a second partition in ext4 format (after that you can't see the partition in windows, only in link2sd), in link2sd check menù - memory space and check de ext4 partition named /data/sdext2.
are you using it right? when you select an app you don't choose "move to sdcard" but "action" and then "link"; and in setting check the auto link option so every app you install automativcally goes linked to card.
Hi.
Thats how i did it:
1. Flashed Stock Rom via Odin.
2. Unroot via "UnlockRoot"
3. Flashed KyleOpen Kernel v5 via Odin.
4. Created 10GB partition FAT32 for data and 3 GB ext2 for Link2Sd.
Works great.
Now I am searching for a Kernel with BLN support for my S7562...
Which Kernel do you use?
Sent from my GT-S7562 using xda app-developers app
cruising6n said:
Hi.
Thats how i did it:
1. Flashed Stock Rom via Odin.
2. Unroot via "UnlockRoot"
3. Flashed KyleOpen Kernel v5 via Odin.
4. Created 10GB partition FAT32 for data and 3 GB ext2 for Link2Sd.
Works great.
Now I am searching for a Kernel with BLN support for my S7562...
Which Kernel do you use?
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
I don't think there is a bln kernel for our phone, anyway in the kyleopen thread there are some, I use the breakfast kernel overclocked 1.15 ghz,
http://forum.xda-developers.com/showpost.php?p=42037184&postcount=1162
simply try the kernels from the higher oc, probably you will have bootloop, continue to try other kernels in descending order, when the phone boots and is stable that is the max speed your phone supports.
with this and other tweaks on my bmg2 stock rom I have 4990 on antutu benchmark
i want a most stable and fast rom for samsung galaxy s duos 7562 plzzzzzzzzzzz
Here's what you want..!
volmax000 said:
i want a most stable and fast rom for samsung galaxy s duos 7562 plzzzzzzzzzzz
Click to expand...
Click to collapse
Below is the link of the fastest and the most stable ROM for your DEVICE :
[CLICK HERE TO KNOW MORE]
Don't forget a THANKS
caft nofkno
ssdev97 said:
Below is the link of the fastest and the most stable ROM for your DEVICE :
[CLICK HERE TO KNOW MORE]
Don't forget a THANKS
Click to expand...
Click to collapse
Hi,
I had some problems with this ROM.
For example the cam did not work properly, openning PDF´s had problems and the internet was laggy.....i also had to reboot the phone very often to make it work correctly.....
In my opinion the rootet stock rom with the Kyle Open V5 Kernel works perfekt now, for me.
I need fast stable rom...im trying link above...ty anyways
Sent from my GT-S7562
ROM Suggestion.
Hey Fellas!!
Does any one have any experience with below listed ROMs????
http://forum.xda-developers.com/showthread.php?t=2503230
http://forum.xda-developers.com/showthread.php?t=2335532
are the features of this ↨ two ROMs same i mean The HYD52ROM V5 is MIUI Themed having few features and HYD52ROM(Glossy THEMED) describes bundle of features including Battery performance/Graphics, Screen, Images/CPU, Governors, I/O Schedulers/AOSPA 3.60 system tweaks and many more. please suggest!!
http://forum.xda-developers.com/showthread.php?t=2369030
Please Suggest which one should i install.If there is any better ROM available out there then please do let me know
Note: I Am on Stock Indian latest Baseband.
Click to expand...
Click to collapse
Thnx a ton in advance
holymoz said:
I don't think there is a bln kernel for our phone, anyway in the kyleopen thread there are some, I use the breakfast kernel overclocked 1.15 ghz,
http://forum.xda-developers.com/showpost.php?p=42037184&postcount=1162
simply try the kernels from the higher oc, probably you will have bootloop, continue to try other kernels in descending order, when the phone boots and is stable that is the max speed your phone supports.
with this and other tweaks on my bmg2 stock rom I have 4990 on antutu benchmark
Click to expand...
Click to collapse
Can you please provide a link for the breakfast kernel? I want to try that out!! And how to flash a kernel? Im using cheatmans kernel that comes with cosmic rom
Sent from my GT-S7562 using xda app-developers app
MufcTK said:
Can you please provide a link for the breakfast kernel? I want to try that out!! And how to flash a kernel? Im using cheatmans kernel that comes with cosmic rom
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
download the kernels from here
http://stodulkovi.cz/kyle/breakfast-kernels/
you can flash it with odin (download below)
install drivers on the pc or install samsung kies, conncect phone to pc and verify it's recognized as storage;
disconnect phone from pc, go into download mode: shut down phone, then long press volume down+power on+home button until it vibrate;
appears a warning, press volume up;
now start odin, connect phone to pc, verify under id:com become yellow with the com port, under PDA select the kernel file,press start and wait.
I reccommend a cwm backup just in case somethimg goes wrong.
holymoz said:
download the kernels from here
http://stodulkovi.cz/kyle/breakfast-kernels/
you can flash it with odin (download below)
install drivers on the pc or install samsung kies, conncect phone to pc and verify it's recognized as storage;
disconnect phone from pc, go into download mode: shut down phone, then long press volume down+power on+home button until it vibrate;
appears a warning, press volume up;
now start odin, connect phone to pc, verify under id:com become yellow with the com port, under PDA select the kernel file,press start and wait.
I reccommend a cwm backup just in case somethimg goes wrong.
Click to expand...
Click to collapse
Thanks!! So i just need ro flash it via odin? Using the pda option? Cool thanks
Sent from my GT-S7562 using xda app-developers app
Dear rum maker SamMobile take the necessary files-Listen to the S7562C S7562 S7562 4.1.2 you want to install the 4.1.2 version? Kindly reply to this topic.
SM-N9000Q cihazımdan Tapatalk kullanılarak gönderildi
S7562C.. That's for Chinese..Right?
erselsahin said:
Dear rum maker SamMobile take the necessary files-Listen to the S7562C S7562 S7562 4.1.2 you want to install the 4.1.2 version? Kindly reply to this topic.
SM-N9000Q cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Hey..! What that mean??? Didn't understood your words..!
On sammobile .com yesterday appeared original firmware 4.1.2 for S7562C. (S duos chinese version)
the qestion is if we can flash on our S7562?
I think is spam from other forums
sorry if that a question is noob . but the thing is that i flashed viper x+ 2.0.3 that comes with Sebastian fm kernel . to tray swipe 2 wake feature i flashed the elite latest kernel & it goes like charm . After receiving 2.1 OTA I tried to go back to Sebastian kernel . so i use the venom flasher to flash the kernel , recovery & kernel modules ( Kernel N Recovery for 2.0.2 & up That posted on viperx + page) . but i lose the wifi/signal !!!!!!!!!!!!
the Q ..... How i can flash the sebastian kernel without losing the wifi/signal
shqrif said:
sorry if that a question is noob . but the thing is that i flashed viper x+ 2.0.3 that comes with Sebastian fm kernel . to tray swipe 2 wake feature i flashed the elite latest kernel & it goes like charm . After receiving 2.1 OTA I tried to go back to Sebastian kernel . so i use the venom flasher to flash the kernel , recovery & kernel modules ( Kernel N Recovery for 2.0.2 & up That posted on viperx + page) . but i lose the wifi/signal !!!!!!!!!!!!
the Q ..... How i can flash the sebastian kernel without losing the wifi/signal
Click to expand...
Click to collapse
Its because kernel flasher doesn't work properly for HOX+, as when it reboots to recovery phone is not visible by pc for like 1 minute and it failes to push modules.
http://d-h.st/d3U
Use this to flash it for now, we will upload fixed Kernel flasher also..
Thank you very much