Make fake S-View Functional? - Galaxy Note 3 Accessories

Is it possible to turn a fake S-view case into a real one?
I know the S-View has the IC chip but thissite is selling IC chips for cheap. Could I just put the IC chip where it is suppose to go on the fake one and have functional S-View?

Yes it is possible to make the fake I view case work.And all I will say is you are on the right track as far what you are thinking to make it work
Sent from my NOTE 3 using Tapatalk
---------- Post added at 08:27 PM ---------- Previous post was at 08:23 PM ----------
Pikezer1337 said:
Is it possible to turn a fake S-view case into a real one?
I know the S-View has the IC chip but thissite is selling IC chips for cheap. Could I just put the IC chip where it is suppose to go on the fake one and have functional S-View?
Click to expand...
Click to collapse
Sent from my NOTE 3 using Tapatalk

stevenb691 said:
Yes it is possible to make the fake I view case work.And all I will say is you are on the right track as far what you are thinking to make it work
Sent from my NOTE 3 using Tapatalk
---------- Post added at 08:27 PM ---------- Previous post was at 08:23 PM ----------
Sent from my NOTE 3 using Tapatalk
Click to expand...
Click to collapse
But is that all that is needed?

Pikezer1337 said:
But is that all that is needed?
Click to expand...
Click to collapse
The case also needs a magnet built it, but isn't this a waste of time, the site only sells them for at .99USD and you need to buy 100 minumum.
I think I seen a site selling them for USD 9 each, unless you live in china where you can get them cheap locally, it will work out more expensive.
In china you can buy the cover with and without the ic, i've purchased them individually including the ic, and there are many version, you need to know which one are good quality and which one are complete crap.
The price I get them locally are less than what that site is selling them at, but you need to live near china.
your best option is to by a complete one from ebay.
These are my left over unused one's

kms108 said:
The case also needs a magnet built it, but isn't this a waste of time, the site only sells them for at .99USD and you need to buy 100 minumum.
I think I seen a site selling them for USD 9 each, unless you live in china where you can get them cheap locally, it will work out more expensive.
In china you can buy the cover with and without the ic, i've purchased them individually including the ic, and there are many version, you need to know which one are good quality and which one are complete crap.
The price I get them locally are less than what that site is selling them at, but you need to live near china.
your best option is to by a complete one from ebay.
Click to expand...
Click to collapse
I only ask because I am reviewing a custom made flip cover but it doesn't come with Sview and I wanted to install it. Would the IC connector allow it to sleep/wake at least or do I still need a magnet?

Pikezer1337 said:
I only ask because I am reviewing a custom made flip cover but it doesn't come with Sview and I wanted to install it. Would the IC connector allow it to sleep/wake at least or do I still need a magnet?
Click to expand...
Click to collapse
yes you need a magnet

It's cheaper to buy another fake case with the chip built in from Ebay. They have them for $7 now

2swizzle said:
It's cheaper to buy another fake case with the chip built in from Ebay. They have them for $7 now
Click to expand...
Click to collapse
That's probably what I am going to do. It's like a custom Batman S-view case, so I really want to get it to work. Hopefully I can just take the chip and put it in the one I currently have.

this is IC With Good Price
http://www.aliexpress.com/item/Chin...over-ic-N900-N9005-N9006-Note/1541231675.html

CoolPyr0 said:
this is IC With Good Price
http://www.aliexpress.com/item/Chin...over-ic-N900-N9005-N9006-Note/1541231675.html
Click to expand...
Click to collapse
Shipping is 18 dollars:crying:

Pikezer1337 said:
Shipping is 18 dollars:crying:
Click to expand...
Click to collapse
Thats one thing about buying from aliexpress, either the shipping cost is free or it's overpriced, many of the stuff from their send to hong kong where I live, only cost a fraction of the cost of what they offer.

Pikezer1337 said:
Is it possible to turn a fake S-view case into a real one?
I know the S-View has the IC chip but thissite is selling IC chips for cheap. Could I just put the IC chip where it is suppose to go on the fake one and have functional S-View?
Click to expand...
Click to collapse
Just download S-view apps or go for pro. It will turn your fake sview to original sview look by the apps sensor.

where can i download it?
Sent from my SM-N900 using xda app-developers app

IzArsha said:
Just download S-view apps or go for pro. It will turn you fake sview to original sview look by the apps sensor.
Click to expand...
Click to collapse
with the sensor on it will consume more power, just go for a non oem s view cover from ebay, they are very cheap.
There is a new s view accessory out, I will try to get a few and will post more information on this.

CoolPyr0 said:
where can i download it?
Sent from my SM-N900 using xda app-developers app
Click to expand...
Click to collapse
Google for it
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
kms108 said:
with the sensor on it will consume more power, just go for a non oem s view cover from ebay, they are very cheap.
There is a new s view accessory out, I will try to get a few and will post more information on this.
Click to expand...
Click to collapse
I think it's okay because @Pikezer1337 doesn't say anything about battery consuming.
---------- Post added at 12:32 AM ---------- Previous post was at 12:27 AM ----------
CoolPyr0 said:
where can i download it?
Sent from my SM-N900 using xda app-developers app
Click to expand...
Click to collapse
It's okay. Download the file attached
Mod Edit link removed

IzArsha said:
Google for it
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
I think it's okay because @Pikezer1337 doesn't say anything about battery consuming.
---------- Post added at 12:32 AM ---------- Previous post was at 12:27 AM ----------
It's okay. Download the file attached
Click to expand...
Click to collapse
I never said anything regarding the app. In fact upon using it, it does drain a good amount of battery, and is just not as useful.

help me
kms108 said:
The case also needs a magnet built it, but isn't this a waste of time, the site only sells them for at .99USD and you need to buy 100 minumum.
I think I seen a site selling them for USD 9 each, unless you live in china where you can get them cheap locally, it will work out more expensive.
In china you can buy the cover with and without the ic, i've purchased them individually including the ic, and there are many version, you need to know which one are good quality and which one are complete crap.
The price I get them locally are less than what that site is selling them at, but you need to live near china.
your best option is to by a complete one from ebay.
These are my left over unused one's
Click to expand...
Click to collapse
hi kms108, can you support to let me know how to buy some ic chip for note 3. My chip die already and cannot use event in latest Kitkat update last night
Thank you

jackyminh said:
hi kms108, can you support to let me know how to buy some ic chip for note 3. My chip die already and cannot use event in latest Kitkat update last night
Thank you
Click to expand...
Click to collapse
I think the kitkat update should of fix this problem, on my note 3, updated to KK and the s view chipset still works, my qi/s view receiver also works.

Related

Waterproof Case?

Do they make a fully waterproof case for the Note yet??
Sent from my Rooted Samsung Galaxy Note Running ICS 4.0.4
If you go to the Samsung website there is an accessories page off the Note's product page. There is a pouch that is sized for the Note that can hold the Note and is waterproof. This is probably not what you want though, as you probably want a case rather than a pouch. It is unlikely you will find any case that is waterproof, you may find some that are water resistant.
Anyway the product is by Berlin Gear, and is often sold at boat rental locations to keep your phone with you when you are boating.
---------- Post added at 01:33 PM ---------- Previous post was at 01:23 PM ----------
Oh one thing, there are a bunch of pouches that fit the galaxy note out there, the one I pointed to just happens to be easy to find from the Samsung Galaxy Note page. You can also go to Amazon and look for one, there is even a skin tight pouch that can be wrapped around the Galaxy note that will make it waterproof, although not sure for how long. This makes parts of the phone inaccessible, but would be good if you need to use the phone for a period of time near water.
Somebody at life proof needs to get their butt in gear and make one for the note, I know I'd buy it
Sent from my SAMSUNG-SGH-I717 using xda premium
astang99 said:
Somebody at life proof needs to get their butt in gear and make one for the note, I know I'd buy it
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I already spent a few hours on the phone trying to convince them. First time at 1 million sold, second time at US launch.Offered to take my phone over there for measurements and prototyping. Got either: keep your eyes peeled on the facebook page. Or: we are working on a universal case that should work for your phone.
So, I don't know what their R&D consists of, but apparently many millions of units on the market isn't enough to get their interest. Maybe the budget just doesn't support new products... or the owner is an iPhan.
That makes no sense on life proofs part...gee who wants to make money...
Sent from my SAMSUNG-SGH-I717 using xda premium

Getting rid of my note 3

So i'm parting ways with my Note 3.
i have some accessories i'm wanting to go to a good home esp to the fellas in the XDA group. is it against the rules to give out here for free? (minus shipping cost)
I've seen other do it. What do you have?
Bear Motion slim case in black (http://www.amazon.com/gp/product/B00ESA8STS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1) -- ALREADY CLAIMED
Spigen Neo Hybrid in black (http://www.amazon.com/gp/product/B00DCIZKPM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1) -- ALREADY CLAIMED
Anker 6400maH battery w/ backing (http://www.amazon.com/gp/product/B00FFQLW1U/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1) - ALREADY CLAIMED
RockSmart UI case - snapback (http://www.ebay.com/itm/281439411301?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT) - i lost the serial number for the software though. -- ALREADY CLAIMED
If i'm allowed, then i'm offering them any/all free. I just asked to be offset for costs of shipping.
otherwise i'm expecting to get banned. lol
THANKS ALL!
aldouse said:
Bear Motion slim case in black (http://www.amazon.com/gp/product/B00ESA8STS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1)
Spigen Neo Hybrid in black (http://www.amazon.com/gp/product/B00DCIZKPM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1)
Anker 6400maH battery w/ backing (http://www.amazon.com/gp/product/B00FFQLW1U/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1)
RockSmart UI case - snapback (http://www.ebay.com/itm/281439411301?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT) - i lost the serial number for the software though.
If i'm allowed, then i'm offering them any/all free. I just asked to be offset for costs of shipping.
otherwise i'm expecting to get banned. lol
Click to expand...
Click to collapse
I'm interested. I have nothing. New to note 3 coming up from a note. Should we pm PayPal details?
Sent from my Nexus 7
I'll do the UI case for sure. How do I buy?
---------- Post added at 07:39 AM ---------- Previous post was at 07:38 AM ----------
Even the spigen case maybe
aldouse said:
(http://www.amazon.com/gp/product/B00FFQLW1U/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1) - ALREADY CLAIMED
Click to expand...
Click to collapse
If the person that claimed this happens to back out, I'm all in!! :good:
Mind if I pick up the neo hybrid case if its available?
Sent from my SM-N900V using Tapatalk
Since everything has been given away this thread has run its course

It was bound to happen, the cammera glass broke.

I knew it before buying it, stupid design. Does anyone know where I could find the glass replacement for the rear camera in Kuala Lumpur? (or Malaysia in general it'ok) Or if any of the phones sold here would be compatible, like the Vivo or whatever?
I don't know if it helps, but on aliexpress some sellers have tempered glass for the camera. I know it's not exactly what you are looking for, but it's a good start as I believe the actual camera glass will be quite hard to find.
available on aliexpress.
https://fr.aliexpress.com/item/For-..._1&btsid=e67b3b05-85b3-4800-b5be-8740111a76a5
meuhmeuh51 said:
available on aliexpress.
https://fr.aliexpress.com/item/For-..._1&btsid=e67b3b05-85b3-4800-b5be-8740111a76a5
Click to expand...
Click to collapse
Thanks! 39 days tho, thats a lot, but its a start, now I know that its the same glass as leeco 1 :good:
McMacri said:
I knew it before buying it, stupid design. Does anyone know where I could find the glass replacement for the rear camera in Kuala Lumpur? (or Malaysia in general it'ok) Or if any of the phones sold here would be compatible, like the Vivo or whatever?
Click to expand...
Click to collapse
found at ali express around $3.8 - $5.09 usd. search for leeco le max 2 camera....
zealord7 said:
found at ali express around $3.8 - $5.09 usd. search for leeco le max 2 camera....
Click to expand...
Click to collapse
Yes, I know it's in AliExpress, but I don't have a stable address so I cannot order it. Would appreciate if someone knows where to buy it in Malaysia/Thailand/Singapore.
McMacri said:
Yes, I know it's in AliExpress, but I don't have a stable address so I cannot order it. Would appreciate if someone knows where to buy it in Malaysia/Thailand/Singapore.
Click to expand...
Click to collapse
im from malaysia bro, i already order it , and the glass+protector is on the way. probably takes around 3-4 weeks...
zealord7 said:
im from malaysia bro, i already order it , and the glass+protector is on the way. probably takes around 3-4 weeks...
Click to expand...
Click to collapse
Oh, all right then, where in Malaysia are you? Could I order one, have it delivered to your place and then go get it? Or would it be too weird?
McMacri said:
Oh, all right then, where in Malaysia are you? Could I order one, have it delivered to your place and then go get it? Or would it be too weird?
Click to expand...
Click to collapse
in terengganu... are u asking me to order it for u or what? the glass still in the delivery, but it will take around 3 weeks to arrive here, the item is in shipment from china. why dont u just register at ali express and pay using maybank2u visa.. its easy though..
zealord7 said:
in terengganu... are u asking me to order it for u or what? the glass still in the delivery, but it will take around 3 weeks to arrive here, the item is in shipment from china. why dont u just register at ali express and pay using maybank2u visa.. its easy though..
Click to expand...
Click to collapse
Oh no, I was thinking about me ordering and of course paying it but sending it to your house. My issue is not having a delivery address. Actually my gf just told me that we are going to Cherating in a couple of weeks after going to Borneo.
mine cracked too after falling out my pocket as I was sitting on the floor to the concrete ( I purchased the replacement from aliexpress but hopefully it's easy to install. Do you just pry the old one out using a tweezer because it's just hold together by 3m tape right?
xterminater07 said:
mine cracked too after falling out my pocket as I was sitting on the floor to the concrete ( I purchased the replacement from aliexpress but hopefully it's easy to install. Do you just pry the old one out using a tweezer because it's just hold together by 3m tape right?
Click to expand...
Click to collapse
Just got mine after 8 weeks from Alliexpress (should be called allieslomo). Any advice on how to fit/install ?
MadMicro said:
Just got mine after 8 weeks from Alliexpress (should be called allieslomo). Any advice on how to fit/install ?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=cuwP65oymyc
I think you should find professional help.
---------- Post added at 02:15 AM ---------- Previous post was at 02:12 AM ----------
MadMicro said:
Just got mine after 8 weeks from Alliexpress (should be called allieslomo). Any advice on how to fit/install ?
Click to expand...
Click to collapse
Don't blame Aliexpress, blame your local post office and/or customs services. You are probably in Canada, aren't you?
Amowagou said:
https://www.youtube.com/watch?v=cuwP65oymyc
I think you should find professional help.
---------- Post added at 02:15 AM ---------- Previous post was at 02:12 AM ----------
Don't blame Aliexpress, blame your local post office and/or customs services. You are probably in Canada, aren't you?
Click to expand...
Click to collapse
Your assumptions are wrong on both counts. First read the opening post. But you may be correct about the professional help but not for my phone.
MadMicro said:
Your assumptions are wrong on both counts. First read the opening post. But you may be correct about the professional help but not for my phone.
Click to expand...
Click to collapse
You don't need to open your phone.
The procedure is pretty much the same as this: OnePlus 3/3T cracked camera glass replacement
If you act carefully it should work ok

I give up anyone want my bits?

I'm soon returning my mate 20 pro and have ordered a mate 20x to replace it. I purchased some plastic screen protectors (never opened) that are meant to work with the fingerprint sensor and a clear case that I will no longer need after I post it back. If anyone wants them if you will cover the postage they are yours.
screen protectors cost me £7.99 from amazon I think case was £4
If your in the UK I guess around £2 postage should cover it. Will post around 1st of december. Let me know if your interested.
ooMoo said:
I'm soon returning my mate 20 pro and have ordered a mate 20x to replace it. I purchased some plastic screen protectors (never opened) that are meant to work with the fingerprint sensor and a clear case that I will no longer need after I post it back. If anyone wants them if you will cover the postage they are yours.
screen protectors cost me £7.99 from amazon I think case was £4
If your in the UK I guess around £2 postage should cover it. Will post around 1st of december. Let me know if your interested.
Click to expand...
Click to collapse
You still got these?
jaimeletelierhay said:
You still got these?
Click to expand...
Click to collapse
I do indeed would you like them
ooMoo said:
I do indeed would you like them
Click to expand...
Click to collapse
Hey I would like them, I live in the UK too so I guess postage would be easier I assume with royal mail idk? What is it?
---------- Post added at 08:28 AM ---------- Previous post was at 08:26 AM ----------
Quantumkk123 said:
Hey I would like them, I live in the UK too so I guess postage would be easier I assume with royal mail idk? What is it?
Click to expand...
Click to collapse
Oh this is for case? Nah I am alright lol thought you were giving the phone away lol
Just case and screen protectors. Ha ha can't afford to give away a phone.
ooMoo said:
Just case and screen protectors. Ha ha can't afford to give away a phone.
Click to expand...
Click to collapse
Lol than guess I can't haha because I own an honor play and was taking a glance at this forum
Still available?
Still available ? i'm in uk too.
becksvector said:
Still available ? i'm in uk too.
Click to expand...
Click to collapse
Yes still available my mate 20x arrived today so I will be able to post next week.
ooMoo said:
Yes still available my mate 20x arrived today so I will be able to post next week.
Click to expand...
Click to collapse
I don't know if i'm too late for this but I would like to be in line if @becksvector hasn't committed to it.
CHUNGHO888 said:
I don't know if i'm too late for this but I would like to be in line if @becksvector hasn't committed to it.
Click to expand...
Click to collapse
@becksvector since you messaged first please pm if you want it and we can sort of not I will give to chungho888
Sinse my mate 20 X has arrived I should be able to post it sometime this week.
I'll be 3rd in line if the other 2 have gone quiet on you mate?
May I be considered for fourth if the other 3 drop out lol?cheers have a good one,ps read your title and thought I was on the wrong forum lol.
Sorry guys it's already posted to Chungho888
Hi all, I received the parcel yesterday.
Thank you very much ooMoo!
ooMoo said:
Sorry guys it's already posted to Chungho888
Click to expand...
Click to collapse

I have a case design idea which potentially solves the back panel being exposed

Hey all,
I think ive got a nice design for a protective shell similar to the included one but with the ability to fully cover the back panel when the phone is closed.
Does anyone know of case manufacturing companies that I can contact about this?
Thanks!
Nikolay1243D said:
Hey all,
I think ive got a nice design for a protective shell similar to the included one but with the ability to fully cover the back panel when the phone is closed.
Does anyone know of case manufacturing companies that I can contact about this?
Thanks!
Click to expand...
Click to collapse
Can have it made in India.. Let me know if interested I will ask them to WhatsApp u.. My number is 09820004500 name is Rico.. The patent.etc between u and the suppliers.. I'm just helping.
Rico Narang01 said:
Can have it made in India.. Let me know if interested I will ask them to WhatsApp u.. My number is 09820004500 name is Rico.. The patent.etc between u and the suppliers.. I'm just helping.
Click to expand...
Click to collapse
Cool thanks, I'll design it in fusion 360 and then contact you
Nikolay1243D said:
Cool thanks, I'll design it in fusion 360 and then contact you
Click to expand...
Click to collapse
Pls contact a Mr. Kapoor Manoj. On whstsapp 09821270072 pls give my ref. Dr. Rico Narang. Minoge has a leather factory he can make it for u.. This is between the 2 of u.. Have fun..
---------- Post added at 02:19 PM ---------- Previous post was at 02:18 PM ----------
Rico Narang01 said:
Pls contact a Mr. Kapoor Manoj. On whstsapp 09821270072 pls give my ref. Dr. Rico Narang. Minoge has a leather factory he can make it for u.. This is between the 2 of u.. Have fun..
Click to expand...
Click to collapse
His name is Manoj. Not Kapoor..
Nikolay1243D said:
Hey all,
I think ive got a nice design for a protective shell similar to the included one but with the ability to fully cover the back panel when the phone is closed.
Does anyone know of case manufacturing companies that I can contact about this?
Thanks!
Click to expand...
Click to collapse
Is there an update on this?
tarroyo said:
Is there an update on this?
Click to expand...
Click to collapse
Kind of but not by me. The chinese manufacturers made this case which is what my one was going to be but my one was going to have the plunger on the back screen and no cover for the front.
https://www.aliexpress.com/item/1005001640988542.html
I bought the original version of this which didnt come attached to a bumper(you were expected to remove the bumper and stick it with the adhesive strip the case came with. But that adhesive was weak and kept on unsticking.
This new design they've made integrated with the bumper seems better but I think they should use magnets instead of a plunger because sometimes it's worrying how much it pulls on the screen before it pops off.
For the moment my case of choice is this one in black, I just take it out when I want to unfold. But it allows the back to be used while the case is on which is what I ultimately wanted. You just tap through the case since there's no hole which is what I wanted and taps work as normal
https://www.aliexpress.com/item/1005001652194534.html
I check aliexpress every couple of days for new designs so if there's one which is the "perfect" case, I'll be sure to post it here on the mate xs forum

Categories

Resources