[ROM]FOXHOUND DIAMONDDOGS 3.65UPDATED4MDKtoMK2&AnyCarrier-SS-NOKNOX-CLEAN-FAST-THEMED
Gogolie'sROM Port: Foxhound Diamond Dogs 3.6 MDK THRU MK2 COMPATIBLE & ANY CARRIER COMPATIBLE = VZW - AT&T - TMO - SPR THERE IS NO FORCED KERNEL OR MODULE INSTALL! (NECESSARY FOR SAFESTRAP PLEASE MODERATORS DON'T MAKE ME INCLUDE ONE ITS NOT NECESSARY FOR OUR PHONES!)
This very quick little TW rom is awesome its my daily. New update allows for zip install to any slot on SafeStrap or through any custom recovery. AT&T and other carriers may need to flash your MK2 modules or add in TMO APN/ AT&T APN / SPRINT APN settings to get this beast working 100%. If that didn't fix your problem then you need to install the GSM / LTE carrier modem (just guessing that your GSM if you can't get this going as thats been only complaint of lost data and he was able to fix it with proper carrier modem). If these options are too difficult I'll be posting my own comp packs for major carriers below in download sections zip install immediately after installing ROM.
Known issues/Not Working (only for select users):
No known issues exist, if you find a reoccurring bug that has not been addressed here or in the Int section please post.
Issues with not having "stockish on stock slot" may occur by having a heavily modified/themed ROM in stock slot using SafeStrap.
If it doesnt work for you I'm sorry your best bet if your on VZW is SS but with thousands of downloads and hardly any issues across the board with the 1st release I think that speaks for itself... ALL My ROMs rock and are fixed ports or originals and bug free for me or I wouldn't release them. Otherwise this thread would be a mile long like some other Roms that need constant support! Enjoy took me some time to put together so if it works thank me or better yet donate so you can see updates and more roms!
This is a port of the Foxhound Diamond Dog Team's v3.6 w/ ML6 base using a essential only install w a lot of mods and a clean diamond boot animation, included 4.4 apps and a sound/volume mod with the ultra sharp Foxhound theme. Updated all parts of ROM like Xposed / Play Store ect that were giving users some issues before.
Remember I myself nor XDA is responsible for any actions or mistakes or decisions you make with your phone. Installing a custom ROM is a personal decision I say flash it all but thats my decision. However a bit of insight would tell you there is no kernel forced installed like most ROMs try to do so there is much less chance of any errors or issues or bricking because of this. I recommend installing MK2 stock or your favorite kernel and trying and experimenting with this yourself.
Lil about me: I'm a now broke, technically I'm disabled (w/ 4 crushed discs in spine the gov says I'm too young to get disability and shouldn't admit that MMJ medicine works for me they=heartless pricks)I'm a full time single parent of a 1 yr old so Idon't get a lot of time for my passions anymore. ex award winning programmer (lost the love for it, be sure to copyright anything you intellectually own especially when it comes to working with G or MS. they'll steal your everything claim you signed it over and hang you out to dry) now i'm just a fellow android lover with a knack for making things work when they normally won't, experimenting, coding,scripting, anything I feel like doing so if this or any of my other creations or additions to your phone helped you in any way help keep my kid in fresh diapers or put a beer in my hand please. Anything is better than nothing I have spent countless hours learning testing and everything in between to bring you cool stuff like this. Thanks!
PS Sorry to all the fans of my ROM ports I had promised updates and made them but wasn't able to post on here because I didn't offer support or own a sprint phone (even though I fix/root and install my roms for customers of my home business on all national carriers without issues:!) Let em hate eh if I suddenly vanish and stop responding or supporting my threads (give me a few days to respond to PMs and questions) or my accounts not active find me at Infamous Forums. Thanks again for all the donations and support. I do this for the users that like their phones to have options. Not for the money or fame (LOL get treal i love the accusations they funny but come on play nice other devs lying about my stuff)
NEW DOWNLOADS: (Install .zip in any Custom Recovery. Tested on Philz and TWRP.)
UPDATED ZIP FOR "GOGOLIE'S UNOFFICIAL SLIM" VERSION 3.65: LINK(Ignore the .zip header info it says Phoenix 7.3 I forgot to modify its not it is Foxhound DD 3.65 too much work being done to update)
NEW WALLPAPERS TO TRY:
#1, #2, [URL="http://feb.imghost.us/G7oG.jpg"]#3[/URL], #4, #5
ALTERNATIVE LOCKSCREENS:
#1
OPTIONAL GPS FIX INTL: LINK (thx poeypresents/thedoman/jrkruse)
MORE DLs SOON LIKE COMP PACKS FOR SPRINT, TMOBILE AND AT&T **THESE ARENT NEEDED TO INSTALL IF OP IS FOLLOWED
OLD VERSION Download SS/TWRP Install by Restores:
https://docs.google.com/uc?id=0BwL6-n3ZMcedTzY1WFJ4N1dEQ2s&export=download
or
https://docs.google.com/file/d/0BwL6-n3ZMcedTzY1WFJ4N1dEQ2s/
Install:
Unzip into your new SS backup dir into your backup Safestrap folder in a folder like gogolies-Foxhound3.6 make sure all files are simply in 1 folder and that folder is in your backup directory and restore to a ***blank/newly created or STOCK*** rom slot. I went super small as small as SS would allow for slot creation. If your getting an error on restoring be sure to try deleting the slot and re-adding it then restoring the system files. If your WiFi doesn't work try flashing MJ7 or MK2 SS modules but only flash modules after 1st booting up rom and knowing wifi isnt working. 1st boot takes time plz allow a minute after loading up 1st time after 1st boot. Startup time is fastest SS rom I've seen. FH Apps and Settings contain xposed and modules for it and can help u customize and tweak it a bit but are installed as system files and don't let you update easily but it can be done I suggest just leaving it until another release or read down in the thread for details on how to update if you must..
Special thanks to: you fools that downloaded this to help test and found little to no actual issues... or specific user issues... THCX boys!
Surge1223, Hashcode, rarffaele88, snakes, jrkruse, ktoonsez,open1your1eyes, sbreen94, k1mu, old&slow, beanstown106, Dubbsy, invisiblek, nitroglycerine33, jovy23, andybones and anyone else contributing anything toward development!
-gogolie
Screens from VZW:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Below is a copy of what raffaele88 said in his original thread please thank him and anyone associated.
raffaele88 said:
Based on last firmware
Deodexed & Rooted
Unlimited SMS recipient list
Disabled scrolling cache
Removed bloatwares (Available on zip)
Large APN list
Insert Xposed Framework
Battery 1% mod
Insert module for Xposed
DPI Changer
Market multi DPI inverted
Rom are Themed and costumizable with Xposed
Insert Rom Control in Settings
Enabled Call recording
4 Way reboot (Recovery,Download…
Hacked Stock Email App
Latest SuperSu update
Ota Update
Enabled all supported languages
Enabled call button on Contacts list
Auto wipe cache & dalvik-cache before flashing
Insert back button in Browser
Removed boot sound
MultiCSC
Busybox
More...
Installation
Full wipe or without wipe
Essential Rom or Normal
Theme
Foxhound Black theme
Samsung
Keyboard*
Google
Samsung
Camera*
Samsung
Google
Kernel
Stock
faux
Launchers
Nova launcher
Apex
Touch Wiz
Performance Mod
SQlite
EXT4
GPU
Boot Animation
FoxHound Diamond Dogs
Google edition
Font
Foxhound (smaller)
Stock
Google Edition AOSP 4.4 Kitkat
Calculator
MMS
Calendar
Clock
Sound Mod
Viper4Android
Boost Audio
* Both application can be installed
1.Downalod Rom
2.Put in your Phone memory
3.Reboot in Recovery
4.Wipe data in you came from other rom (optional)
5.Select Zip and install
6.Reboot enjoy
LINK
Donate Rya Engel: Link
Donate Denny: Link
Rixsta for theme base link
Nottach for module link
Wanam for kernel
Rovo89 for Xposed framework link
Vertmus for Domination theme
Click to expand...
Click to collapse
Dude you are awesome!
Sent from my SCH-I545 using XDA Premium HD app
looks absolutely amazing man! I will be hitting this up on my next day off, thank you for this!
im confused where to place the folder once i download the zip. i dl'd the zip. extracted it to my phone. made slot 2. went to restore in SS but cant find the folder to restore? how do i go about this?
chrismyu said:
im confused where to place the folder once i download the zip. i dl'd the zip. extracted it to my phone. made slot 2. went to restore in SS but cant find the folder to restore? how do i go about this?
Click to expand...
Click to collapse
unzip the file you just downloaded into the folder where your backups are saved. for me its TWRP>BACKUPS>6056c852.Then you select rom slot 2(or make a slot 2).In the main menu select restore and you should see the file you unzipped with the rest of your backups if you have any. I just did it and this maybe my new favorite! Hope this helps you out
Downloading!
Sent from my SCH-I545 using xda app-developers app
This looks very nice. Looks like I may be updating to mk2 if /when I find the time. Thanks
Sent from my SCH-I545 using XDA Premium 4 mobile app
Working great on MK2 SS AT&T S4!!!!!!!
Is there a possibility of a version for those of us still running mdk/lokid?
Sent from my SCH-I545 using Tapatalk
Mine keeps failing, says no partition selected.
The rom is great but it keeps screwing with my hangouts. One minute it'll work then the next it won't show
Sent from my SCH-I545 using XDA Premium HD app
How do I increase the system partition, when I hit the + sign nothing happens.
Looking forward to another choice!
It looks like a very slim and smooth rom but still packed with features we need. But may i ask why rom slot 2? What, your roms too good for slot 1? , Also, how many ppl on MJ7 have tested it without updating? (Just curious). Thanks again for the new toy!
Got this one up and running and I suppose the others I had tried in the past would work now to.
After some input in various threads by @Surge1223 , it came to my attention that I should try ODIN back to MJ7 and stick there instead of updating to the MK2 bootloader if wanting to run HD RLS12 in stock side which is my preference.
After I did that and restored my Nandroid of HD RLS12 to stock side then had to apply the MJ7 module, all was well.
Created a slot, and this time was able to get this up and running via restore to slot. 1st time of success with that with any ROM whether via Nandroid Restore or flashing to.
Monkeying around with it now, so far so good. One thing I notice is with Xposed Installer, In the settings under 'update' , there is an update available for it but it won't install - says something about package with that name and different signature found.
---------- Post added at 08:43 AM ---------- Previous post was at 08:23 AM ----------
Update: Root Explorer shows nothing as in will not load up directories just black screen?
Update #3: Nevermind about Root Explorer. User error. I mistakenly restored app & data from it via TIBU. I uninstalled and restored App only and all is well now!
shindiggity said:
How do I increase the system partition, when I hit the + sign nothing happens.
Click to expand...
Click to collapse
The system partition size is pre-set in the app code. To my knowledge you can't resize it. Maybe if you rewrote the script but im not there yet. Ppl tend to forget safestrap 3.7x is still beta.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
seems like a sweet rom. I havent had time to restore my apps and what not but im looking forward to a test drive. On MJ7 btw...
Restoring this ROM to my slot failed. I'm rooted on MK2 with SS 3.71 installed. Was able to load the Omega ROM, but not this one.
Sent from my SCH-I545 using xda app-developers app
This ROM is awesome! Super slick and good looking.
You may want to put this in your instructions.
If you can't find where the backup folder is go into safestrap and make a backup of the cache on stock ROM.
Then extract the .zip file to the folder with the cache backup and has allot of numbers and letters on it.
Sent from my SCH-I545 using XDA Premium 4 mobile app
rslu2 said:
Restoring this ROM to my slot failed. I'm rooted on MK2 with SS 3.71 installed. Was able to load the Omega ROM, but not this one.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I know I said I wouldnt be offering support on this one but since you were kind enough to try my first omega version that and I really really like this rom over any others and I've ported a good 10 new ones to the phone now
have you tried deleting the slot and then remaking it? not sure why but that seems to work if its failing restore. then just restore system files I actually just had to do this earlier after finishing up omega v19 sorry I am not able to see whats the issue I believe its something with the way safestrap is "formatting" or something. hope that helps no Idea if that doesnt work you might be in the restoring boat like lazer9 had to do that method will work for those unable to install this as is. odin mj7 reroot then ss then whatever. Oh and you don't have to put this on Slot 2 I just included it incase it still mattered in safestrap whether or not you restored to same slot but it does not matter apparently. So install to any slot should work fine probably even stock if someone dared try? same with MJ7 users just flash modules if it doesn't boot up first try. obviously theres some different issues with various parts of the rom plz continue to post your findings guys. I promise nothing but I'll help if I can.
I found the first problem,
For me you can't download apps from play store, any tips?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Related
OMEGA v19
FIGURED WITH INDIE RELEASING HIS 4.4 LEAKED ROM I had better let you guys enjoy it a bit before the v20 4.4 and an unloked bootloader port heh, joking probably wont see her for a bit boys and girls so enjoy what you can while you have it. btw thats 4.4 that triggers knox but ima try it later since I've triggered it messing with SS trying to get zips working for people over last cpl weeks... im sure well see 4.4 tw soon enough til then enjoy.
This is a follow up to my v18 ROM any problems or issues try first searching that thread for info then post issue or problem herein v19's thread please.. http://forum.xda-developers.com/showthread.php?t=2591648
thanks testers of my original port v18. of course ...indie... genius and the rest of the omega crew. thx ppls
like all my new roms this is multicarrier friendly meaning you might have to flash your modules and possibly modem and apns to get full service but its very easy to do and nearly all files possibly needed for this conversion are available at http://www.androidfilehost.com/?w=devices&uid=23269279319201630 along with various other mods and rom ports.
Installing is straight forward: zip is for slots 1-420 and the restorable install is for any slot including STOCK!!!
And this wont hurt your phone or leave incompatability issues like other SS roms may have done. Plz post problems issues here not on indies or any other omega forum. Thanks must be given to indie and anyone he says I just ported this one was the easiest one I've done and has been 100% successful for everyone I personally installed for. Be sure to +thank me or indie or Download another rom.
Install by running zip from Safestrap or TWRP. Untested on CWM. After installing if not a MK2 VZW user you will have to flash your Safestrap modules and modem and apn if all else fails. This installs the best on a fresh rom slot ie newly created / blank.
Zip DL:
http://www.androidfilehost.com/?fid=23311191640114279
SS RESTORE DL:
http://www.androidfilehost.com/?fid=23269279319202601
Install: unzip the backup files in the zip to a folder like /TWRP/backupsi/141fa3db/ndie-Omega19bygogolie no matter where the files need to be one level in a directory named something and your TWRP/SS backup directory needs to read from that location if you cant figure this out you probably should not be installing a custom anything. Once files are where you want them pop into SS/TWRP and restore these to any slots butt even STOCK. yay ok bed time ill update and make pretty maybe later.
I HIGHLY RECOMMEND USING THE RESTORE VERSION OVER THE ZIP. PERSONALLY I THINK ITS SAFER MORE COMPATIBLE WITH ALL PHONES WITH 3.7+
hi haters.
thx wip testers and omega crew clans. thx again hashc0de and surge ur my heroes your works been a godsend
Omega v19 Opening Post
Changelog:
Based on firmware XXUEML6 Android 4.3 (Date: 19/12/2013)
Kernel talexop v1.3
New:
Notification Manager by RYO Software - Omega Rom users can monitor 3 apps instead of 1, thanks and credits to bartito for this gift to us
Added:
Google Drive
18 new csc to Omegas Multi csc
Updated:
Kernel talexop v1.3 with MKF ramdisk
Accounts Sync Profiler
ChatON
Dolphin Browser
Flipboard
Tripadvisor
Rom is Deodexed + Rooted + Zipaligned
Rom is No Full Wipe
I'm gonna give this a try tonight. Thanks!
Sent from my SCH-I545 using XDA Premium 4 mobile app
Awesome work! already running the SS restore version and its excellent! I'll give the zip install version a whirl and see how she looks.
new vers
Gator Brah this is the V19 are u the 1 download i saw that SS restore was sitting idle on ah for a cpl weeks. if the zip doesnt work or give you a nice looking version try the new SS restore v19 just posted link here for it. thanks guys!
gigilie said:
Gator Brah this is the V19 are u the 1 download i saw that SS restore was sitting idle on ah for a cpl weeks. if the zip doesnt work or give you a nice looking version try the new SS restore v19 just posted link here for it. thanks guys!
Click to expand...
Click to collapse
Hey man one thing i've noticed with this rom (both SS and zip options) as well as your other rom M1A3, Wifi seems to have trouble maintaining a stable connection. It tends to drop off and i find myself having to toggle it every so often.
The other issue is also with wifi, when i try to connect to an access point using 2 phase authentication (WAP + PEAP) it will accept the credentials, pass verification but never receive the IP address. It then just bounces back and forth between scanning for wifi networks and trying to obtain an IP address from the access point....which kills the battery.
I can connect to the very same access point from the stock rom.
I've tried flashing the modules, replacing the modules with the ones from the stock rom, as well as replacing the wap_config.conf file from the working rom slot. no go
Hopefully you can clue me into a fix. Im on MJ7, I have seen this problem come back after i re-flashed my image with Odin. its definitely related to these roms in particular
Other than that i really like both of these roms. the gold theme on M1A3 is pretty cool too
+1 using foxhound. I love that ROM but am having the same problems as above. Won't connect to work network and keeps searching and obtaining IP address but never connects and kills battery. Used data on way home for maps and signal said 4g but Google said not connected had to switch back to stock and all was fine...shame cause I love foxhound.... Using ss 3.71 on MK2
Gator Brah said:
Hey man one thing i've noticed with this rom (both SS and zip options) as well as your other rom M1A3, Wifi seems to have trouble maintaining a stable connection. It tends to drop off and i find myself having to toggle it every so often.
The other issue is also with wifi, when i try to connect to an access point using 2 phase authentication (WAP + PEAP) it will accept the credentials, pass verification but never receive the IP address. It then just bounces back and forth between scanning for wifi networks and trying to obtain an IP address from the access point....which kills the battery.
I can connect to the very same access point from the stock rom.
I've tried flashing the modules, replacing the modules with the ones from the stock rom, as well as replacing the wap_config.conf file from the working rom slot. no goHopefully you can clue me into a fix. Im on MJ7, I have seen this problem come back after i re-flashed my image with Odin. its definitely related to these roms in particular
Other than that i really like both of these roms. the gold theme on M1A3 is pretty cool too
Click to expand...
Click to collapse
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
gigilie said:
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
Click to expand...
Click to collapse
sure i'll do testing on that. I wont be back at work until monday to test out the wifi though.
Loaded this rom via safe strap restore with no issues. Working on getting everything setup. No issues encountered to this point
No issues with wifi...
Sent from my SCH-I545 using XDA Premium 4 mobile app, but battery life is horrible. Sitting overnight went from 70% to 12% this morning.
gigilie said:
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
Click to expand...
Click to collapse
So the first fix didnt change anything unfortunately. Flashed the second zip and on reboot had a ton of FC errors and couldn't even unlock the screen. Restarted again and it was pretty much soft bricked...had to restore from backup.
Flashed zip in twrp, loaded great no serious problems. Only issue is that it keeps trying to encrypt my SD card. I am concerned about losing data. Please advise how to stop encr. I have been rebooting and took out card. Any suggestions? Thanks.
Sent from my SCH-I545 using Tapatalk
Alxoom33 said:
Flashed zip in twrp, loaded great no serious problems. Only issue is that it keeps trying to encrypt my SD card. I am concerned about losing data. Please advise how to stop encr. I have been rebooting and took out card. Any suggestions? Thanks.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Edit: reflashed. Note wifi does not work, reflashed latest 1/17 Ktoonsz kernel, wifi works but now starts trying to encrypt SD card again...?
Sent from my Xoom Wifi using Tapatalk
Alxoom33 said:
Edit: reflashed. Note wifi does not work, reflashed latest 1/17 Ktoonsz kernel, wifi works but now starts trying to encrypt SD card again...?
Sent from my Xoom Wifi using Tapatalk
Click to expand...
Click to collapse
it shouldnt do anything to an SD card
Thanks, re flashed and fixed issue.
Sent from my SCH-I545 using Tapatalk
I thought it would be helpful to share my post from the Foxhound thread on installation of Omega on MDK http://forum.xda-developers.com/showthread.php?p=49744674
[ROM]Foxhound Diamond Dogs 3.6 TW-4.3-MK2/AnyCarrier-SS-KNOXfree-CLEAN-FAST-THEMED
Gigilie, I would be happy to walk through Omega instillation on MDK. It's very easy.
Before you start make sure you downloaded Omega. v. 19. I used the .zip version and reccomend flashing .zip for all MDK recovery based installs. Also dl the most current ktoonsz 4.3 tw kernel. The version in Omega did not work well and a fresh install is best. Also dl any mods you like, such as those you might use with HD or other 4.3 TW roms.
1. Using recovery, I use TWRP 2.6.3, be sure to make a back up nandroid of your current rom.
2. Wipe. A full factory wipe is best.
3. Flash Omega v. 19 and the new ktz kernel and wipe cache and Calvin for good measure (not absolutely necessary).
4. Reboot, set up and give the rom some time to set up and load your backuped apps from the playstore.
5. Go back to recovery and flash your mods.
If you are brave or foolish, restore only the data from your 4.3 or 4.2 TW Nandroid.
If you start getting fc's then wipe data, and reload your data and apps manually from the playstore and or from Ti backup. I found that data from my HD 12 Nandroid was compatible with Omega. I was using the S4 UI in HD v. 12, not the Note 3 UI; and data from other setups may not play well with Omega v.19.
That's it. Easy peasy. Have fun!
Sent from my Xoom Wifi using Tapatalk
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
lazepr said:
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
Click to expand...
Click to collapse
Actually it was with MDK. For MJ7 you need Safestrap.
Sent from my Xoom Wifi using Tapatalk
lazepr said:
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
Click to expand...
Click to collapse
they should be there... if not grab the apk from the play store
i chek in on this bad boy everyday or every few at least and with over 550 downloads (thousand views) and only 2 pages for a thread this rom must be pretty damn stable otherwise thered be floods of ppl i think? anyway thanks for trying it guys please post some ant benchmarks with pics in here or any of my roms i'd appreciate it the whole Unmatched quote in HD bugs me as all my roms score higher and are faster and work just as well on battery so i dont know what their talking about just want confirmation of this plz guys
gigilie said:
OMEGA v19
FIGURED WITH INDIE RELEASING HIS 4.4 LEAKED ROM I had better let you guys enjoy it a bit before the v20 4.4 and an unloked bootloader port heh, joking probably wont see her for a bit boys and girls so enjoy what you can while you have it. btw thats 4.4 that triggers knox but ima try it later since I've triggered it messing with SS trying to get zips working for people over last cpl weeks... im sure well see 4.4 tw soon enough til then enjoy.
This is a follow up to my v18 ROM any problems or issues try first searching that thread for info then post issue or problem herein v19's thread please.. http://forum.xda-developers.com/showthread.php?t=2591648
thanks testers of my original port v18. of course ...indie... genius and the rest of the omega crew. thx ppls
like all my new roms this is multicarrier friendly meaning you might have to flash your modules and possibly modem and apns to get full service but its very easy to do and nearly all files possibly needed for this conversion are available at http://www.androidfilehost.com/?w=devices&uid=23269279319201630 along with various other mods and rom ports.
Installing is straight forward: zip is for slots 1-420 and the restorable install is for any slot including STOCK!!!
And this wont hurt your phone or leave incompatability issues like other SS roms may have done. Plz post problems issues here not on indies or any other omega forum. Thanks must be given to indie and anyone he says I just ported this one was the easiest one I've done and has been 100% successful for everyone I personally installed for. Be sure to +thank me or indie or Download another rom.
Install by running zip from Safestrap or TWRP. Untested on CWM. After installing if not a MK2 VZW user you will have to flash your Safestrap modules and modem and apn if all else fails. This installs the best on a fresh rom slot ie newly created / blank.
Zip DL:
http://www.androidfilehost.com/?fid=23311191640114279
SS RESTORE DL:
http://www.androidfilehost.com/?fid=23269279319202601
Install: unzip the backup files in the zip to a folder like /TWRP/backupsi/141fa3db/ndie-Omega19bygogolie no matter where the files need to be one level in a directory named something and your TWRP/SS backup directory needs to read from that location if you cant figure this out you probably should not be installing a custom anything. Once files are where you want them pop into SS/TWRP and restore these to any slots butt even STOCK. yay ok bed time ill update and make pretty maybe later.
I HIGHLY RECOMMEND USING THE RESTORE VERSION OVER THE ZIP. PERSONALLY I THINK ITS SAFER MORE COMPATIBLE WITH ALL PHONES WITH 3.7+
hi haters.
thx wip testers and omega crew clans. thx again hashc0de and surge ur my heroes your works been a godsend
Omega v19 Opening Post
Changelog:
Based on firmware XXUEML6 Android 4.3 (Date: 19/12/2013)
Kernel talexop v1.3
New:
Notification Manager by RYO Software - Omega Rom users can monitor 3 apps instead of 1, thanks and credits to bartito for this gift to us
Added:
Google Drive
18 new csc to Omegas Multi csc
Updated:
Kernel talexop v1.3 with MKF ramdisk
Accounts Sync Profiler
ChatON
Dolphin Browser
Flipboard
Tripadvisor
Rom is Deodexed + Rooted + Zipaligned
Rom is No Full Wipe
Click to expand...
Click to collapse
Failed due to "no partition selected." I noticed on second try that the usual check box partition options was blank. I tried mounting all the partitions to no avail. Please help--thanks
Edit: I forgot to mention it is the Restore version.
(theme) "MISSING LINK" aka O.Z.O.P THEME BUILDER and BOOT/SHUTDOWN INSTALLER 10/15/14
*"THE MISSING LINK" Theme builder (see changelog)
BEFORE MODDING YOUR SYSTEM ALWAYS MAKE A FULL NANDROID BACKUP!!!!
This has been built and tested on my T-Mobile S5
O.Z.O.P. ROMOne Zip One Place
I started out theming back on my S2 and created what is now called "Missing Link"
As any themer/developer knows, these things take test, after test, after test, to get things working and looking properly !!!
The problem is, every time things get left behind and garbage files build up until the ROM isn't running just how I like.
I USED to have to wipe everything and flash the Base ROM, then flash seperate file after file, or mods and theme options to get it back to where i wanted it and this is where O.Z.O.P. is born!!!
My idea for this project is to have One Zip file in One Place with EVERYTHING you could want or need to build a new and different ROM when you feel the need for change. So this will DEFINITELY be W.I.P. and grow with more and more to come, and go if need be!!
So Here is a run down of the options given to you during the Aroma Installation
Starting with
*Backup/Restore your current settings, accounts, Bluetooth/WiFi pairings, text messages and setting with call logs, very convenient when you are a pure flashaholic like myself.
There is definitely a right way and wrong way to apply your restoration.
Don't worry that I've testing it thousands of times literally.
click for instructions on Backup/Restore Script
Right now the complete Restore Script isn't working in the same flash session as the ROM install.
follow these to reduce problems
1) In recovery run the "Backup Script"
2) Flash the ROM (of your choice)
3) in the same session run "Restore Script" and any other mods you want. This will get your account sign in finished
4) let the phone boot up and finish the "Set up Wizard"
5) now boot to recovery and run the "Restore Script" and this will finish restoring your settings options and text messages.
if you have "force close of android.process.acore" or any other force close issue
***THE FIX EVER TIME IS GET TO RECOVERY AND FIX PERMISSIONS!!! *** Simple as that.
*WIPES
choose cache and dalvik cache wipe or go for the Full Wipe
*KERNELS,
Current Stock Kernel
ktoonsez Kernel v9-21 includes Kernel Tweaker app and monitor (installed by default)
Chronic Kernel newest version
*CUSTOM RECOVERY
Clockwork Mod
TWRP
Philz
all are the most current available
*THEMED GAPPS
Team Blackout Playstore
Inverted Blue Playstore
Transparent Playstore
Team Blackout Google Search (go google from any screen not working)
Gun's Inverted Blue Google Search (go google from any screen not working)
Stock Google Maps
Darkhorse Blue Edition Maps
Google Translate
Black YouTube
OG YouTube Downloader with Screen off playback
*LAUNCHERS
ADW Launcher
Apex Launcher
Nova Launcher
Stock Modified TW Launcher with Theme options and Pullup mod
LMT Pie Launcher
*CAMERAS
Cyanogenmod Camera
Google 4.4 Camera with Photosphere
Lenova Super Camera
Hyper X Stock Mod Camera
Photosphere Addon for Stock Camera
*TOOLS/APPS
ROM TOOLBOX
ADVANCED TASK MANAGER
GREENIFY
BOAT BROWSER
ES FILE MANAGER
TiTANIUM BACKUP
POWERAMP PLAYER
BLACK GOOGLE CALENDER
LG OPTIMUS LOCKSCREEN
BLACK FLIPBOARD
FLOATING TOUCHER QUICK LAUNCH
MULTIWINDOW MANAGER
AD AWAY
SCREEN OFF ANIMATION
WANAM
XPOSED G TOUCHWIZ
XPOSED LOCKSCREEN WIDGETS
XPOSED FRAMEWORKS
*MODS/TWEAKS/MODDED APPS
CARRIER STATUSBAR
SOFTKEY NAVIGATION BAR
ViPER4Android
EXTRA QUICK SETTING TOGGLES
4 WAY BOOT POWER MENU
HARDWARE BUTTON SWAP
3MINIT BATTERY MOD
S-FINDER and QUICK CONNECT REMOVAL
SYSTEM VOLUME BOOST
BATTERY SAVE
FASTER FILE SYSTEM MANAGEMENT
FASTER INTERNET BROWSER
SMOOTH TOUCH ZIPALIGN CLEANING
SPEEDY MEMORY BOOST
TWEAKED BUILD.PROP
QUICK TRANSITIONS
ODEX YOUR ROM
DE-ODEX YOUR ROM
DIALERS
FULLSCREEN INCALL DIALER
STOCK INCALL DIALER
STOCK MMS
DARK MMS
DISABLE ANNOYING POPUPS
FIX PERMISSIONS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*"THE MISSING LINK" Theme builder
included in the same zip file.
You have the option to pick from
*12 Quick-pick themes
or go for the
*Build-a-Theme option will when I get it dialed will have literally Unlimited options for new theme option. The Theme options are Vrtheme for universal compatibility. You will be able to choose from options like
*Dialers,
*Signalbars, 30+ choices
*Data Icons/Arrows, 13 choices
*Sprint Data, 9 choices
*Wi-Fi Icons, 14 choices
*Frameworks, Base System Option which will theme to match, the apks will include Framework-res.apk, SystemUI.apk, SecSettings.apk, SecMms_Blue.apk, SecTele and InCallUi.apks, Keyguard.apk and some of the other common system apks, 12 choices
*Volume and Brightness Sliders, 27 choices
*Spinners, 27 choices
*Toggles, 15 choices
*Toggle Backgrounds, 15 choices
*Switches, 9 choices
*Lockscreen Unlock Animations, 9 choices (must select in lockscreen options "unlock effect" none
*Fingerprint Scanner theme, 4 choices
*Divider Lines Primary and Secondary, 9 choices each
*Transition Animations, 4 options
You will also have options that allow
*Bootanimations with Custom zip enabled, 15 choices
*Shutdown Animations, 13 choices
That is all the theme option available right now. The installer has animated and still image previews for most of the choices.
There will be more coming to this section in every update for a while!!
*******************PRESS "CLICK TO SHOW CONTENT" FROM THE BELOW TO PREVIEW THE MISSING LINK CHOICES***************
***Signal Bars, Data Arrows and Icons and Android Backgrounds***
***FRAMEWORK THEMES***
Black Magnum
Google
Green
Orange
Mellow Yellow
*****BOOT ANIMATIONS*****
Blue Plasma
Illusions
D.N.A.
Blown Away
Blue Helix
Omega
Zoom World
Van Gogh
DOWNLOAD
Not Not v2.3 NG4 here
Missing Link plus v3+
Remember this is work in progress.
I am always open for new ideas and please let me know if things aren't working.
Thanks again.
This project wouldn't be possible without all of the brilliant minds here on XDA!!!
**Again, before you run this installer make a backup Just In Case!!
previous releases
*****Download Not Now v1 HERE*****
Fixes/misc downloads:
*Flashable TWRP 2.8.0.1
*Fingerprint Scanner
Instructions for installation
1-Download and place on internal SD card (either work, just quicker loading from internal card)
2-Boot to custom recovery or your choice
3-Flash the zip file of Missing Link you downloaded
4-Aroma Installer will run you through a list of option with multiple choices to choose from (if you're not sure what they are follow instructions to preview your choice while you using Aroma)
5-Reboot and you good, no wipe necessary, done
Instructions for Restoring your backup
1-You will only have a backup if you have flashed Missing Link or ROM Not Now
2-The Script creates a Flashable Backup and puts it in the NotNow folder on your internal SDcard
3-It will only keep 1 (one) copy of this file. It gets overwritten every time. So if you flash Missing Link and Then flash it again, you will no longer have the setup you started with. You will have a copy of your most recent Missing Link Theme. So if you want the "back to stock" copy, you will have to manually take a copy of the first flash from the folder and place it else where.
4-When you're ready just flash the Undo_Last_MissingLink.zip from recovery
5-Reboot and you good, no wipe necessary, done
[/CENTER]
Changelog;
v3
*will now be two versions (1 full and 1 minus the rom, just over a gig of storage)
*basically I am making this a "build your own rom' with a lot of mod options
*most of these mods, tweaks a modded apps are cooked in Not Now but wanted to make them for the people that use this file for other roms
*carrier statusbar change to other variants for different data Icons
*3minit Battery Mod thanks @gharrington
*4 way power boot menu
*I will continue to update this because there is a lot more, I just have to leave right now
*
v2.3
*updated complete base to newest update NG4
*ROM is now Deodexed
*added back some essential Samsung apps to get S-Health, Ultra Power Saving and One Handed Operations fully functional now.
*includes most of csc tweaks (call recording, mms limits, camera tweaks and more)
*a big, no HUGE amount of my energy went into the Theming options
*removed most of the non compatible options
*fixed a lot of unmatched icons in SecSettings.apk as well as SystemUI.apk
*much more that I can't remember, with much more to come
v2
*full debloated ROM is now included (based off the newest NG3)
*worked in a lot more Theming
*added options for Black Dialer and MMS from international ROMs
*bug fixes, which include;
Camera options are installing now,
updated Black Play Store
*more I can't remember right now.
v1
*initial release
*includes full script with only select mods and theme options
*settings/logs backup and restore working for most things(no calls or text being restored)
Thanks go out to
@BeansTown106 for all he brings to the community and for the NG4 base
@edgarf28 for his Aroma Package with apps from full stock ROM and for his Debloated ROM helping me decide what I can remove from my ROM
Looking forward to trying this today...... just need to get home from work.
Sent from my Galaxy S5 running NeatRom 0X1
Hello. Impossible to open.
I've the good md5 but error when try to open ( error es file explorer: divide by 0......)
Thanks
micky387 said:
Hello. Impossible to open.
I've the good md5 but error when try to open ( error es file explorer: divide by 0......)
Thanks
Click to expand...
Click to collapse
try a different file manager (root explorer works)
Thanks. Working
micky387 said:
Thanks. Working
Click to expand...
Click to collapse
NP. It's weird that it says that. I've seen with a few other Aroma zips from other devs too. Not sure why it says that, but the files always open with Root Explorer and they always flash fine. Let me know what you think of the mod options. Even better let's see some screenshots!! Any feedback is appreciated. Thank you
Im really looking forward to this,most other themes for the S5 have got abandoned and there is almost no nice theme around
Hey Stang, how you been?
Glad to see you got the S5. Maybe you could clone your thread over to Sprint S5 Themes and Apps as well. I'm sure the folks would like to play with this over there as well.
tdunham said:
Hey Stang, how you been?
Glad to see you got the S5. Maybe you could clone your thread over to Sprint S5 Themes and Apps as well. I'm sure the folks would like to play with this over there as well.
Click to expand...
Click to collapse
I'm doing much better since being dropped by Sprint for using too much" unlimited data"! I love this phone! I have been following your mod thread since before I actually had the phone in hand. So many good mods. The hard part is picking which to start with first. Unfortunately I've been having issues with my PC and decompiling correctly. I'm in need of a reformat anyways. That's a great idea about sharing this over to the sprint people. A few small adjustments and should work fine with Sprint version. Good to hear from you and keep up the good work. Thank you
This is very handy. I have a couple of suggestions that might help to get more people check this out quicker. Perhaps a quick tutorial in the initial post about how to use aroma? I only know how to use this through recovery. Is there another way? Also I think that maybe a pure dark theme would get people's attention fairly quickly. How are you able to theme pkm files with aroma? I didn't think that was possible. All in all, very cool. Thanks for the work that you you have put in. I'm looking forward to additional options.
Ryno1982 said:
This is very handy. I have a couple of suggestions that might help to get more people check this out quicker. Perhaps a quick tutorial in the initial post about how to use aroma? I only know how to use this through recovery. Is there another way? Also I think that maybe a pure dark theme would get people's attention fairly quickly. How are you able to theme pkm files with aroma? I didn't think that was possible. All in all, very cool. Thanks for the work that you you have put in. I'm looking forward to additional options.
Click to expand...
Click to collapse
Thank you for the comments. I will be working on you suggestions with new releases. Enjoy
Also I am not themeing the pkm images with Aroma, not Theming pkm files at all. I was surprised when I discovered them and disappointed when I found the difficulty in even viewing them. Hopefully soon I will get that part figured out. You can expect a whole level then!!
Anyways the OP is updated with a new link for Missing Link v1.1 update
Works on Sprint, too!
Working out the kinks.....but it does work.
jpgranger said:
Working out the kinks.....but it does work.
Click to expand...
Click to collapse
Definitely still working out the kinks and testing new things daily! With the help of @Ryno1982 and his advice about the new pkm image files it opened up some options with the Dialers. I I will put together an update with these new options for a release this week hopefully.
Every time I go to flash it says installing..then just hangs and hangs
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Martinjv71 said:
Every time I go to flash it says installing..then just hangs and hangs
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
Not enough info to help?? what options did you pick?
What ROM are you using?
What recovery are you flashing with?
Did you download to your phone or pc?
Where does it "hang"? Does it say "zipalign in progress", "optimizing system"? If so this part takes a little while especially if you picked every option. If it takes more than say 2 minutes, then something is wrong.
I would check md5, if that's good I would make sure it's on the internal sdcard. It works on extsdcard just much slower.
I have not experienced this problem personally, but every phone is different so let me know so we can get you going.
thanks for the input
stangdriver44 said:
Not enough info to help?? what options did you pick?
What ROM are you using?
What recovery are you flashing with?
Did you download to your phone or pc?
Where does it "hang"? Does it say "zipalign in progress", "optimizing system"? If so this part takes a little while especially if you picked every option. If it takes more than say 2 minutes, then something is wrong.
I would check md5, if that's good I would make sure it's on the internal sdcard. It works on extsdcard just much slower.
I have not experienced this problem personally, but every phone is different so let me know so we can get you going.
thanks for the input
Click to expand...
Click to collapse
I am using Unity Ron based off of new international. It hangs on initial install. Downloaded To pc and transferred.. (tried that twice) tried on internal and external storage. How long does the initial startup supposed to take..i don't even get to a startup screen..just..safe strap install screen saying installing.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
---------- Post added at 04:14 PM ---------- Previous post was at 04:12 PM ----------
And3 baseband
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Martinjv71 said:
I am using Unity Ron based off of new international. It hangs on initial install. Downloaded To pc and transferred.. (tried that twice) tried on internal and external storage. How long does the initial startup supposed to take..i don't even get to a startup screen..just..safe strap install screen saying installing.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
---------- Post added at 04:14 PM ---------- Previous post was at 04:12 PM ----------
And3 baseband
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
It shouldn't take longer than 10 seconds, at most!!
This could be a Safe Strap compatibility issue than I'm unaware of? Have you flashed and other Aroma mod installers? If so which one with a link please? I would like to figure this out!!! Any info to a solution would be appreciated. You might want to try the updated v2 from the OP. Just released now. Let me know if maybe that one works?
stangdriver44 said:
It shouldn't take longer than 10 seconds, at most!!
This could be a Safe Strap compatibility issue than I'm unaware of? Have you flashed and other Aroma mod installers? If so which one with a link please? I would like to figure this out!!! Any info to a solution would be appreciated. You might want to try the updated v2 from the OP. Just released now. Let me know if maybe that one works?
Click to expand...
Click to collapse
Tried new version and same thing..i go to install..skips md5 check..say.."installing ".. The progress bar starts moving..The freezes..and I waited 10 minutes..nada
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Martinjv71 said:
Tried new version and same thing..i go to install..skips md5 check..say.."installing ".. The progress bar starts moving..The freezes..and I waited 10 minutes..nada
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
So are you able to pick any options? or it freezes as it is begining? Do you see the splash screen image of Homer Simpson? Is anyone else using a safe strap device? if so are you having issues?
No splash screen..no option freezes on initial install on safe strap..never gets past it telling me installing
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Well here's the continuation of BarRin. But now with ZV8!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents...
Courtesy of and Thanks to @BonezMontana!!
See post #2 for additional files
See post #3 for possible bugs/ issues and fixes
Anyone can use this as a base to build from. Just give credit.
What is has:
This is the ROM, Kernel, Modem, and rpm,tz partitions
Rooted
busybox
Install
In TWRP, select Advanced, Wipe, then /system, /cache, /dalvic, and /data.
You can wipe internal and ext SD. BUT MAKE A BACKUP OF YOUR FILES FIRST!! And don't wipe Ext SD with TWRP. Format it FAT32 on a computer.
Flash Rom
Update profile/prl
Go to "Settings, More, Mobile network, and select anything but "Global
"L" needs to settle in. Don't get in too big of a hurry adding all your apps.
Change logs :
Code:
[B]BarePops_Updates_DPI-580[/B]
Nothing big, Just changing the DPI to 580. With Updates_V1 included
[B]BarePops_Updates_V1[/B]
Just a little update that should work with Any/All ZV8 Rom - dirty flash OK
Stock kernel with init.d support
init.d scripts - sqlite3 and zipalign for /data/apps only
build.prop tweaks - not really sure about these, but we'll see
[B]TE_V1 - Themers Edition[/B]
Same as V2 +
As deodexed as it can be - LGSettings isn't working deodexed yet
Updater-script change - lets see if this fixes some install issues for some
NOW USING ZV4/6 rpm,tz partitions - should fix restores to KK Roms and some reboot issues
[B]V2[/B]
Same as below +
More bloat removed - Weather and Concierge/SmartCards gone
SD Card fix
[B]V1[/B]
Odexed
Removed most Sprint and LG Bloat and tattletales
Apps moved to /data
Oversharpening fix
busybox - trying a different way because L in so new. Updatable through this app.https://play.google.com/store/apps/details?id=stericson.busybox
removed Sprint boot ani and sounds
increased mixer paths
fixed build prop - All Splitwindow, increased Qslide
Concierge board and LG Weather are still in it
Donators - THANK YOU - Never asked for, but very much appreciated!!!
@budeone
@AlwaysLucky
@nkyer
@RustedRoot
@mjjcb
@cabbieBot
@AcE XBOX
@FerretPD
__________________________
Downloads - Full Roms:
BarePop_TE_V1 - Themers Edition - Deodexed - Full Rom - Clean install - Rom, Kernel, Modem, ZV4/6 Partitions
Just another flavor - As deodexed as we can for now.
Possible issue- on install, Apps may automatically hide. Just choose show in settings.
BarePop_V2 - Full Rom - Clean install - Rom, Kernel, Modem, ZV8 rpm,tz Partitions
BarePop_V1 - Full Rom - Clean Install - Rom, Kernel, Modem, ZV8 rpm,tz Partitions.
__________________
Downloads - Updates for all above
Barepops_Updates_DPI-580
BarePops_Updates_V1 - Just an update for the above Roms and it SHOULD work with any ZV8 Rom. Dirty flash is just fine
XDA:DevDB Information
BarePop, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-02-20
Last Updated 2015-02-19
Additional files
Additional files and what-not'sFor V1 or Stock. V2 already has it SD_Card_fix - This should fix the SD Card issue people are having. But if not, see Post #3
For V1 only SmartCard_fix - This will fix Smart Cards/Notifications in V1. Just flash it.
This SHOULD work for ANY ZV8 Rom. ZV8_Stock_init.d_Kernel - if you are stock, you may need busybox installed.
To see if it's working, in a rooted explorer, look in /data and see if it has "Test.log."
For any ZV8 stock based ROM. BarePop bootani Courtesy of @HPTesla
If you have issues installing it, see post below.
Can't download anything? Flash THIS - stock host files.
Bugs/Possible issues and fixes
To remove the Sprint boot animationIf you want to remove the Sprint bootani. Or just be able to install a custom bootani. You will need to do this:
1. In a rooted explorer, go to /carrier/cust/poweron/ and delete those files so the folder is empty.
2. Then do the same with /carrier/cust/poweroff.
3. Go to /system/media and delete the "Sprint_bootanimation.zip". Make sure you leave the "bootanimation.zip" in there.
4. If you don't have anything in the /carrier/cust/ poweron/poweroff folders, don't worry.
If you use Flashtool, they will be there again. That's the only way to get Sprintbootanimation back.
Read this post also. Cleanest install
This will give you the cleanest install without using Flashtool.
Of note, if you do this, when finished, you'll need to reinstall the ROM. The apps in /data get wiped. So you will be missing some stuff.
Bugs/Possible issues:1. This is gonna sound weird, but....sometimes it boots too fast and the lockscreen will freeze. Just give it a minute. All is well
2. The LG Keyboard, may not be able to be removed until it is updated by LG. It can't be moved to /data yet - Just be aware if you remove it.
Install, TWRP, ReceptionI don't know if it's a TWRP thing or not. Here's what I've seen, but it is few and far between but does happen on occasion:
1. As was said earlier, if you need to wait longer than 5 min to get the setup screen, you'll need to pull the battery. Then you can try and flash it again dirty, or do all the wipes again and it'll flash. Really weird.
2. Rarely, but when making a backup in TWRP, it'll take forever. I just pulled the battery, rebooted to the ROM, and let it sit for a few minutes. Then the backup worked fine in TWRP.
3. Sometimes reception just wont work. So update profile/prl and if it still doesn't work, reboot and update them again. That will fix it. And I'm using the rpm,tz partitions.
I don't recommend pulling your battery while in recovery, but sometimes you just have too. Just be forewarned you may need to use Flashtool to fix it.
I've been using TWRP 2.8.3 I think is the version.
SD cardsSD cards are becoming an issue for some reason. If you've followed ALL the instructions in the OP, and are still having issues, you may need to wipe your ext SD. And sometimes Internal as well.
Some people are using an app from the Playstore to fix SD issues. SeLinux Changer, and set it to permissive.
Remove your ext SD and boot up.
If the problems are solved then you need to format your SD card in Windows or Linux as Fat32 no matter what size your card is. DO NOT USE TWRP to format Ext SD.
RootIf SuperSU has issues updating it's binaries, you may need to flash This when you flash the ROM.
GSM UseSome people are able to use this ROM on GSM. YMMV and I can't/don't support this. HERE
Cant wait
Sent from my LGLS990 using XDA Free mobile app
Downloading now! Thank you!
GREAT!!! WORKS PERFECTLY!! THANK YOU FOR YOUR HARD WORK!!!!:thumbup:
Sent from my LGLS990 using XDA Free mobile app
Testing
Will toy with this after work. Was running ZV8 perfectly until I flashed Xposed without a backup and kept getting Circle Case force closes and went back to ZV6. Hopefully I can make this my daily though. Can't wait for G3 toolbox to return for the L.
Sweeet! You blow my mind. Thank you.
This looks like my new home for a while.. cant wait to get into work so I can play!!
CyanJustice said:
Will toy with this after work. Was running ZV8 perfectly until I flashed Xposed without a backup and kept getting Circle Case force closes and went back to ZV6. Hopefully I can make this my daily though. Can't wait for G3 toolbox to return for the L.
Click to expand...
Click to collapse
You couldn't just re-flash zv8 on top of it to eliminate the changes xposed made to /system?
---------- Post added at 08:13 AM ---------- Previous post was at 07:56 AM ----------
This uses SuperSU by chainfire as default root app, correct?
RandomPooka said:
This uses SuperSU by chainfire as default root app, correct?
Click to expand...
Click to collapse
If that's directed at me, yes.
That's the one Team Codefire recommends with Bump. So I'll stay with it.
Thanks a lot for this Engine. Hopefully theming Zv8 will go easier than extracting/assembling it did. A quick question... I flash the zv8 partition zip right before Barepop, correct?
Thanks
:highfive:
RandomPooka said:
You couldn't just re-flash zv8 on top of it to eliminate the changes xposed made to /system?
---------- Post added at 08:13 AM ---------- Previous post was at 07:56 AM ----------
This uses SuperSU by chainfire as default root app, correct?
Click to expand...
Click to collapse
Ah crap, wouldn't that format data?
Since i already installed stock zv8 can i flash this over it?
Sent from my LGLS990 using XDA Free mobile app
Thanks!
Followed the simple instructions and flashed with no problems.
Updated all and going to let stock run over the weekend before I try Xposed or any other customizations.
CyanJustice said:
Ah crap, wouldn't that format data?
Click to expand...
Click to collapse
Typically, no. Not with AOSP and stock based KK ROMs. I don't know off the top of my head if @engine95 had put a data wipe in his install script to make the craziness that is L work properly.
Also, that SuperSU question was directed at you
Does this ROM have anything done to it to alleviate the 5.0.1 stock ROM issue of massive memory leaks that cause apps to close quite aggressively in the background? My brother has 5.0 on the Sprint S5 and his issue is actually worse than mine.
Thanks for this engine95 and the rest of team Stooge ?
Tried running ##Update# in the dialer when phone shut off it would not turn back on. I removed the battery for a min and tried again it still wouldnt turn back on. After 5 mins with battery pull phone finally turned back on. I dont know if this was just something weired with my phone or could been caused by the rom. Either way just thought i would bring it to your attention. Im currently up and running again with no problems. Thanks engine for bringing us Lollipop :victory:
Well here's the continuation of BarePop. But now with ZVA!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents...
BarePapA
See post #2 for files and other info
What is has:
This is the ROM and kernel only
Rooted
busybox
build prop tweaks
init.d kernel support
Install
In TWRP, select Advanced, Wipe, then /system, /cache, /dalvic, and /data. DO NOT select internal or ext SD!
Flash Rom
Update profile/prl
Go to "Settings, More, Mobile network, and select anything but "Global
Change logs :
V1
Odexed
Removed most Sprint and LG Bloat and tattletales
Apps moved to /data
removed Sprint boot ani and sounds
increased mixer paths
fixed build prop - All Splitwindow, increased Qslide
apps removed:
priv-apps
Data Optimizer
LGBoxnet
LGFileManager
LGMcAffeMobileSecurity
LGThinkfree
Lookout
Sprint_Installer
Sprint ID
Vtt-Sprint - updated to data
WIFIOffloader
Zone-Sprint
sys app
Books
ChromeWithBrowser
CloudPrint
Drive
Gmail2
GoogleTTS
Hangouts
LatinImeGoogle - updated to data
LGSpringCleaning
Maps
Music2
Newsstand
PlayGames
PlusOne
Swype
Videos
YouTube
V2
All of the above +
apps removed:
priv-apps
LGActionManager
LGApplicationManager
LGConciergeBoard
LGEasyHome
LGLIA
LGMyGuide
LGMyWellness
LGTasks
LGUpdateCenter
LGVoiceCommand
LGVoiceCommandService
LIAInformant
LIAMrGDBlogger
LIA4URecommender
sys app
LGEasySettings
LGWeather
LGWeatherService
LGWeatherTheme
vender/overlay - com.lge.
appbox
bnr
doyouknow
easyhome
filemanager
launcher2
lifetracker
settings.easy
sizechangeable.weather.theme
task
updatecenter
TE-V1
Same as V1 -But with these changes
build.prop changes
init.d changes
Removed apps
LGQuickmemo - It lost the battle - No choice unless you install an odexed lge-res.apk
LGActionManager
LGApplicationManager
LGLIA
LGUpdateCenter
LIAInformant
LIAMrGDBlogger
LIA4URecommender
MLT
Notes
QuickMemo will not work - need orig lge-res.apk
Smart Notice may be broken, or not fully functioning.
TE to V3
Gotta have my QuickMemo - This converts TE to an odexed ROM.
Basically the same as TE-V1. Guest mode works in this version also.
Downloads:
BarePapA-V1 - Mostly just the bloat removed. Concierge, Weather, Smartcards are still in this one.
BarePapA -V2 - All extras removed
BarePapA-TE-V1 Themers Edition - somewhat deodexed
BarePapA -V3 - ODEXED - This requires installing TE-V1 CLEAN. Then dirty flash this. It is not a complete ROM! If you have TE already installed, then dirty flash should be fine. This is in-between V1 and V2 as far as apps are concerned. Guest mode is fully working.
XDA:DevDB Information
BarePapA, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-06-29
Last Updated 2015-06-29
Files and info
ZVA_Modem
All modems in this folder
Just cuz ya never know.....
ZVA_rpm,tz partitions
ZV4/6 rpm,tz partitions
If you still have Sprint boot ani and want to remove it:
If you want to remove the Sprint bootani. Or just be able to install a custom bootani. You will need to do this:
1. In a rooted explorer, go to /carrier/cust/poweron/ and delete those files so the folder is empty.
2. Then do the same with /carrier/cust/poweroff.
3. Go to /system/media and delete the "Sprint_bootanimation.zip". Make sure you leave the "bootanimation.zip" in there.
4. If you don't have anything in the /carrier/cust/ poweron/poweroff folders, don't worry.
If you use Flashtool, they will be there again. That's the only way to get Sprintbootanimation back.
Backup your EFS first!!! Just to be safe - In the FAQ
A dialer reset may be required for a lot of the issues. In order, easy to most invasive.....
##UPDATE#
or
##SCRTN#
or the biggie - which fixes bootani and Wifi calling
##RTN# - requires your MSL. You will need to either call Sprint. Or, follow THIS
V2 is still uploading. First upload had issues.
Gimme about an hour
Edit: V2 is in the OP
I'll post the modem and whatever extra files in post #2 later. Enjoy
Edit #2: ZVA modem and other info in post #2
Edit #3: Navel Kernel doesn't work with this. Gimme some time as I need to upgrade my Linux and I'm starting from scratch for it. Just cuz I know git a little better now.
Flashed this while at work and working fine, menu page feels a bit snappier.
Thanks for all the work Engine!
engine95 said:
V2 is still uploading. First upload had issues.
Gimme about an hour
Edit: V2 is in the OP
I'll post the modem and whatever extra files in post #2 later. Enjoy
Edit #2: ZVA modem and other info in post #2
Edit #3: Navel Kernel doesn't work with this. Gimme some time as I need to upgrade my Linux and I'm starting from scratch for it. Just cuz I know git a little better now.
Click to expand...
Click to collapse
I must flash the modem after flashing the rom?
Your decision really. I don't think there's much difference between them. But who knows.
At least we have 2 choices now for lollipop.
engine95 said:
Your decision really. I don't think there's much difference between them. But who knows.
At least we have 2 choices now for lollipop.
Click to expand...
Click to collapse
Is Wifi Calling removed in this? I see WifiOffloader was removed, but not sure what that is.
Jimmy50941 said:
Is Wifi Calling removed in this? I see WifiOffloader was removed, but not sure what that is.
Click to expand...
Click to collapse
It's still there. Don't go by the apps removed.
Edit. It's enabled in the status bar. No longer an app. So to speak.
If you don't have it, read the OP in the stock zva thread, I think.
Installed perfectly...like always. Thanks for all your hard work.
BETEO
engine95 said:
It's still there. Don't go by the apps removed.
Edit. It's enabled in the status bar. No longer an app. So to speak.
If you don't have it, read the OP in the stock zva thread, I think.
Click to expand...
Click to collapse
Awesome I didn't install it yet lol I was concerned because I have to use Wi-Fi calling if I need to use my phone at work. I generally have no signal otherwise.
Now we just need nAvel Kernel! lol
Sent from my LGLS990 using XDA Free mobile app
Jimmy50941 said:
Is Wifi Calling removed in this? I see WifiOffloader was removed, but not sure what that is.
Click to expand...
Click to collapse
WifiOffloader is Sprint Connection Optimizer. Be glad it's gone. It's a RAM hungry beast :silly:
Also, props for this. Exactly what I wanted. Slimmed down a bit but everything working.
If I wanted to add LG Health back in, do you know what files I would need for that? It's the only LG app I actually use/like.
You would need at least...
lifetracker
Concierge
My Heath
At the minimum.
It's probably easier to install V1, then remove the apps I have listed. But be careful of any of the overlay files and the LIA....
along either LG AP???
Ok check this out. I have been thru hell and back rooting and activating this G3 to ATT ST sim the last 24 hours - not to mention the damn edits for apns and network swaps and finally I got Twrped... In all the volumes of threads I have read I haven't seen where to store our .zips prior to flashing a new rom. I have been out of the game for a minute and although it's good to be back I am wary because I am used to always having my external sd and a computer with Wi-Fi. I am Zv8 but 5.0.1 so is this even the right rom or should I dig deeper...? I just need stability and a wee bit of guidance. Twrp recovery is awesome but Damn is it trippy and if I know where to store the Rom.zip and modem I will feel more comfortable wiping everything as my nandroid is at least a functio ing rom with signal...
I know it's totally noob and shiz but my poor brain cannot digest anymore. But I am so look close! Anybody? And thanks for the patience AND understanding!
Just a quick question
Version on my phone is reading as 5.0.1, but IIRC this was a slight bump to 5.0.2. Is that normal?
Thank you for this! Just flashed and everything went smooth. I did flash the ZVA modem after the ROM and now that I'm attempting to re-install my apps, I have noticed the data is horribly slow. Took ~90 seconds to down Titanium Back Up which is only 7mb. I'm flashing back to ZV8 (fairly sure I had ZV8 prior) now and data should be back to normal.
EDIT: Flashed ZV8 modem, still really slow data. Not sure what the deal is, going to let the phone settle and see if that helps any.
dyliho said:
Ok check this out. I have been thru hell and back rooting and activating this G3 to ATT ST sim the last 24 hours - not to mention the damn edits for apns and network swaps and finally I got Twrped... In all the volumes of threads I have read I haven't seen where to store our .zips prior to flashing a new rom. I have been out of the game for a minute and although it's good to be back I am wary because I am used to always having my external sd and a computer with Wi-Fi. I am Zv8 but 5.0.1 so is this even the right rom or should I dig deeper...? I just need stability and a wee bit of guidance. Twrp recovery is awesome but Damn is it trippy and if I know where to store the Rom.zip and modem I will feel more comfortable wiping everything as my nandroid is at least a functio ing rom with signal...
I know it's totally noob and shiz but my poor brain cannot digest anymore. But I am so look close! Anybody? And thanks for the patience AND understanding!
Click to expand...
Click to collapse
Anything gsm, I can't help you with that. Maybe for you, pull the ext sd out just to take it out of the equation.
Then do everything with internal sd.
FrankBooth86 said:
Just a quick question
Version on my phone is reading as 5.0.1, but IIRC this was a slight bump to 5.0.2. Is that normal?
Click to expand...
Click to collapse
As far as I know, this is just a patch update. 5.0.1.
InfiniteReality said:
Thank you for this! Just flashed and everything went smooth. I did flash the ZVA modem after the ROM and now that I'm attempting to re-install my apps, I have noticed the data is horribly slow. Took ~90 seconds to down Titanium Back Up which is only 7mb. I'm flashing back to ZV8 (fairly sure I had ZV8 prior) now and data should be back to normal.
Click to expand...
Click to collapse
Make sure you update profile/prl after installing the modem. My reception always sucks. So I never know if it's better or worse.
Maybe try flashing the zva rpm,tz partitions? I haven't even messed with those. I just made then flashable just in case.
You can revert back to the zv4/6 ones if need be. I think they're in the zv8 threads.
engine95 said:
Make sure you update profile/prl after installing the modem. My reception always sucks. So I never know if it's better or worse. Maybe try flashing the zva rpm,tz partitions? I haven't even messed with those. I just made then flashable just in case. You can revert back to the zv4/6 ones if need be. I think they're in the zv8 threads.
Click to expand...
Click to collapse
I did update the PRL/profile afterwards, both after ZVA and after I went back to ZV8. No real change in speed. The LTE star almost never stops spinning... I tried to install the Nest and takes forever to start actually showing it downloading, finally it did and least 1min into it I'm at 448KB. I'm fixing to flash the ZV8 partition and see if that helps. If nothing, I'll do another full wipe and install again. BTW I'm coming form latest BarePop prior to BarePapA
InfiniteReality said:
I did update the PRL/profile afterwards, both after ZVA and after I went back to ZV8. No real change in speed. The LTE star almost never stops spinning... I tried to install the Nest and takes forever to start actually showing it downloading, finally it did and least 1min into it I'm at 448KB. I'm fixing to flash the ZV8 partition and see if that helps. If nothing, I'll do another full wipe and install again. BTW I'm coming form latest BarePop prior to BarePapA
Click to expand...
Click to collapse
Well, you can always try, ##UPDATE# in the dialer. If no luck, then, ##SCRTN#. These 2 are pretty safe. But always make sure you have a backup EFS.
engine95 said:
Well, you can always try, ##UPDATE# in the dialer. If no luck, then, ##SCRTN#. These 2 are pretty safe. But always make sure you have a backup EFS.
Click to expand...
Click to collapse
Work computer is having hicups, can't copy anything via USB to phone. Flashed back to BarePop and all is good (still can't USB to work computer). Going to full wipe and install BarePapA and see what happens. Thanks for the quick replies!
WOW!!
I did a clean install of this yesterday and I must say GOOD WORK!!! running great and buttery smooth as usual!!
Well here's the continuation of BarePapA. But now with ZVB!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents...
BareBum
See Post #2 for info's and extra stuff's
What is has:
This first version is the ROM, Kernel, and Modem
Rooted
busybox
init.d kernel support
Selinux permissive
SD card fix
increased mixer paths - louder sound
LG Backup to /data
Sprint VoiceMail to /data
Version 1 and on - Kernel and Rom only
Install:
Clean install!!!
In TWRP, select Advanced, Wipe, then /system, /cache, /dalvic, and /data. DO NOT select internal or ext SD!
Flash Rom
Update profile/prl. Then "Activate Device"
Go to "Settings, More, Mobile network, and select anything but "Global
If you have install issues --- See this post
Change logs :
Code:
[B]V2 - V1's removed apps, and...[/B]
[B]sys app[/B]
LG Weather
LG Weather service
LG Weather Theme
[B]priv app[/B]
MLT
LGIA
LGAction Manager
LGApplication Manager
LGConcierge
LGEasy Home
LGMyGuide
LGMyWellness
LGTasks
LGUpdateCenter
LGVoice Command
LGVoice CommandService
LIAInformant
LIAMrGDBlogger
LIA4URecomender
[B]V1[/B]
Init.d scripts
build.prop tweaks
Sprint boot ani and sounds removed
[B]Apps removed:
system apps:[/B]
Books
Chrome
Cloud print - moved to /data
Drive
Gmail
Google TTS
Hangouts
Google KB moved to /data
Maps
Google Music
Newsstand
Play Games
Google +
Steet
Swype
talkback
Videos
You tube
[B]priv apps[/B]
Data Optimizer
Box
File Manager
McAfee
ThinkFree
Lookout
Sprint installer
SprintID
Connections Optimizer
Sprint Zone
[B]Base version[/B]
Mainly stock, but with some sugar. NO APPS REMOVED
Rooted
busybox
init.d kernel support
Selinux permissive
SD card fix
increased mixer paths - louder sound
LG Backup to /data
Sprint VoiceMail to /data
Donators - THANK YOU - Never asked for, but very much appreciated!!!
@Kemocybr
Downloads: Each Rom is it's own ROM. Not an Update
BareBum_V2 - Dirty flash from V1 SHOULD be fine. So wipe /system /dalvic and /cache. Any other ROM, clean flash.
BareBum_V1
BareBum_L_Odexed_Stock
XDA:DevDB Information
BareBum, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-09-28
Last Updated 2015-09-27
Files, info and stuffs
Files, info and stuffs
These are already included in the ROM's. But in case anybody wants them for whatever.
SD_Card_Fix
Increased Mixer Paths
Stock_ZVB_init.d_Kernel
_____________________________________
All modems in this folder
_____________________________
Just in case
ZVB_RPM,TZ_partitions
ZV4/6 rpm,tz partitions
___________________________________
Host files
Blocking-host-files
Stock-host-files
________________________________
ALL ZVB stock Keyboards- flashable. ALL LG Keyboards
This will install all Stock LG KB's to /system/app. Remove before install any you don't want. Or after install. in a rooted explorer, /system/app and delete the appropriate folder.
_______________________
Dialer code info
Backup your EFS first!!! Just to be safe - In the FAQ
A dialer reset may be required for a lot of the issues. In order, easy to most invasive.....
##UPDATE#
or
##SCRTN#
or the biggie - which fixes bootani and Wifi calling
##RTN# - requires your MSL. You will need to either call Sprint. Or, follow THIS
Thanks! I was just in the process of pushing autoprime's ROM when I saw you created this one. I'll test it out now.
Is the ZVB modem in your folder the same as from autoprime's thread? Any reason to NOT flash it along with the new ROM?
SilverZero said:
Thanks! I was just in the process of pushing autoprime's ROM when I saw you created this one. I'll test it out now.
Is the ZVB modem in your folder the same as from autoprime's thread? Any reason to NOT flash it along with the new ROM?
Click to expand...
Click to collapse
Yes. It's already included.
But it does not have the RPM, TZ Partitiions that his does. You can see post#2 if you want those.
engine95 said:
Yes. It's already included.
But it does not have the RPM, TZ Partitiions that his does. You can see post#2 if you want those.
Click to expand...
Click to collapse
I never understood what those partitions were or why I'd need to worry. A while back I did a full wipe and nuked my whole phone, so I did a stock recovery using LG's tools and factory images to zv4, I believe, then went from there through BarePop and BarePapA. Coming from that I should be okay, right?
SilverZero said:
I never understood what those partitions were or why I'd need to worry. A while back I did a full wipe and nuked my whole phone, so I did a stock recovery using LG's tools and factory images to zv4, I believe, then went from there through BarePop and BarePapA. Coming from that I should be okay, right?
Click to expand...
Click to collapse
autoprime explains those partitions in his thread. But those of us on ZV4 bootloader seem to have issues with them.
It won't hurt anything to flash ZVB. And if there's issues, just flash back to the ZV4 ones.
ATM I'm still using ZV4 partitions.
Check out prime's thread fo some info on them.
You shouldn't have any issues. Just do a clean install As this is a whole new ROM
It's basically prime's rom with the fixes we like added. That's all. Bone stock with some sweetness.
V1 is in the works and it'll be starting on the cuts and tweaks. I thought I had it about ready, but it broke WIFI Calling so I need to start over. Gimme a few days.
So im using aosp rom and wanted to know if i can just flash the modem in recovery to update it?
churchey360 said:
So im using aosp rom and wanted to know if i can just flash the modem in recovery to update it?
Click to expand...
Click to collapse
Yup. Any of the lollipop modems should be fine.
engine95 said:
Yup. Any of the lollipop modems should be fine.
Click to expand...
Click to collapse
Since this wasn't a major android update will NavelA kernel work with ZVB? I was asking because i know on my s4 i could do that with some updates that didn't have any big changes lol or would it cause it to not boot properly?
Edit: i tried NavelA kernel with Autoprimes ZVB rooted ROM and it works fine
V1 is up in the OP See/read change log
engine95 said:
V1 is up in the OP See/read change log
Click to expand...
Click to collapse
Looks good, thanks for all the hard work. Is there going to be any more versions that will be more stripped down and minimal?
Sent from my LGLS990 using Tapatalk
The_Big_H said:
Looks good, thanks for all the hard work. Is there going to be any more versions that will be more stripped down and minimal?
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
At least one more. But not minimalist. Mostly weather, concierge and the LG tattletales.
But that'll all depend on what breaks doing it. I like to keep it all working if I can.
In post #2, I have added "Ad Blocking" and Stock host files. I absolutely hate ad's and the Blocking one blocks about everything, without needing an app. 2 problems though....
1. Some find them too restrictive and can't get to sites they normally would.
and
2. I seem to forget to remove it when I release a ROM. So these are here for... not if, but when I forget.
Is there a sprint changelog for zvb or something? searching about trying to figure out what is different in this update... appreciate all the time and work spent on us sprint folk. Thank You.
Deejayadhd said:
Is there a sprint changelog for zvb or something? searching about trying to figure out what is different in this update... appreciate all the time and work spent on us sprint folk. Thank You.
Click to expand...
Click to collapse
Go here for the link. http://forum.xda-developers.com/showthread.php?p=63038430
It's just the stagefright fix. But there's other little things that always get modified.
engine95 said:
Go here for the link. http://forum.xda-developers.com/showthread.php?p=63038430
It's just the stagefright fix. But there's other little things that always get modified.
Click to expand...
Click to collapse
Ayuh.. Thanks!
Sent from my LGLS990 using Tapatalk
engine95 said:
In post #2, I have added "Ad Blocking" and Stock host files. I absolutely hate ad's and the Blocking one blocks about everything, without needing an app. 2 problems though....
1. Some find them too restrictive and can't get to sites they normally would.
and
2. I seem to forget to remove it when I release a ROM. So these are here for... not if, but when I forget.
Click to expand...
Click to collapse
Just so I'm making sure i have it right, the blocking ones are in the rom by default? Just wondering because i just finished installing V1 and all my apps and I'm getting ads.
On that note, i just want to say thank you for yet again providing us with a smooth stable rom. For taking the time to make it and upload it for us. It is truly appreciated as i flashed the stock one this morning and OMG I forgot how much crap they put on these things.
Anyway, thank you for making my phone usable.
Macguyver said:
Just so I'm making sure i have it right, the blocking ones are in the rom by default? Just wondering because i just finished installing V1 and all my apps and I'm getting ads.
On that note, i just want to say thank you for yet again providing us with a smooth stable rom. For taking the time to make it and upload it for us. It is truly appreciated as i flashed the stock one this morning and OMG I forgot how much crap they put on these things.
Anyway, thank you for making my phone usable.
Click to expand...
Click to collapse
It's the regular ones. I'm almost done with V2, and yeah... I left them in there. But the regular ones are back in now.
Anyway, there's no issues flashing these back and forth. The host files that is.
Thanks. Glad to hear it. Yeah, I can't handle bone stock either. That's why I get these base roms out so fast.
@engine95
Going to diff ZVB kernel to see if they changed anything.
jcfunk said:
@engine95
Going to diff ZVB kernel to see if they changed anything.
Click to expand...
Click to collapse
Thanks. I briefly looked at source last night, and there's about 3mb more in size. So I would guess quite a bit has changed.
Also, because you called me out in it in the past, zipalign and sqlite3 aren't executable either. I tried a few different ones with no luck.