[ROM] BarePapA - ZVA - Sprint LG G3

Well here's the continuation of BarePop. But now with ZVA!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents...
BarePapA ​
See post #2 for files and other info
What is has:
This is the ROM and kernel only
Rooted
busybox
build prop tweaks
init.d kernel support
Install
In TWRP, select Advanced, Wipe, then /system, /cache, /dalvic, and /data. DO NOT select internal or ext SD!
Flash Rom
Update profile/prl
Go to "Settings, More, Mobile network, and select anything but "Global
Change logs :
V1
Odexed
Removed most Sprint and LG Bloat and tattletales
Apps moved to /data
removed Sprint boot ani and sounds
increased mixer paths
fixed build prop - All Splitwindow, increased Qslide
apps removed:
priv-apps
Data Optimizer
LGBoxnet
LGFileManager
LGMcAffeMobileSecurity
LGThinkfree
Lookout
Sprint_Installer
Sprint ID
Vtt-Sprint - updated to data
WIFIOffloader
Zone-Sprint
sys app
Books
ChromeWithBrowser
CloudPrint
Drive
Gmail2
GoogleTTS
Hangouts
LatinImeGoogle - updated to data
LGSpringCleaning
Maps
Music2
Newsstand
PlayGames
PlusOne
Swype
Videos
YouTube
V2
All of the above +
apps removed:
priv-apps
LGActionManager
LGApplicationManager
LGConciergeBoard
LGEasyHome
LGLIA
LGMyGuide
LGMyWellness
LGTasks
LGUpdateCenter
LGVoiceCommand
LGVoiceCommandService
LIAInformant
LIAMrGDBlogger
LIA4URecommender
sys app
LGEasySettings
LGWeather
LGWeatherService
LGWeatherTheme
vender/overlay - com.lge.
appbox
bnr
doyouknow
easyhome
filemanager
launcher2
lifetracker
settings.easy
sizechangeable.weather.theme
task
updatecenter
TE-V1
Same as V1 -But with these changes
build.prop changes
init.d changes
Removed apps
LGQuickmemo - It lost the battle - No choice unless you install an odexed lge-res.apk
LGActionManager
LGApplicationManager
LGLIA
LGUpdateCenter
LIAInformant
LIAMrGDBlogger
LIA4URecommender
MLT
Notes
QuickMemo will not work - need orig lge-res.apk
Smart Notice may be broken, or not fully functioning.
TE to V3
Gotta have my QuickMemo - This converts TE to an odexed ROM.
Basically the same as TE-V1. Guest mode works in this version also.
Downloads:
BarePapA-V1 - Mostly just the bloat removed. Concierge, Weather, Smartcards are still in this one.
BarePapA -V2 - All extras removed
BarePapA-TE-V1 Themers Edition - somewhat deodexed
BarePapA -V3 - ODEXED - This requires installing TE-V1 CLEAN. Then dirty flash this. It is not a complete ROM! If you have TE already installed, then dirty flash should be fine. This is in-between V1 and V2 as far as apps are concerned. Guest mode is fully working.
XDA:DevDB Information
BarePapA, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-06-29
Last Updated 2015-06-29

Files and info​
ZVA_Modem
All modems in this folder
Just cuz ya never know.....
ZVA_rpm,tz partitions
ZV4/6 rpm,tz partitions
If you still have Sprint boot ani and want to remove it:
If you want to remove the Sprint bootani. Or just be able to install a custom bootani. You will need to do this:
1. In a rooted explorer, go to /carrier/cust/poweron/ and delete those files so the folder is empty.
2. Then do the same with /carrier/cust/poweroff.
3. Go to /system/media and delete the "Sprint_bootanimation.zip". Make sure you leave the "bootanimation.zip" in there.
4. If you don't have anything in the /carrier/cust/ poweron/poweroff folders, don't worry.
If you use Flashtool, they will be there again. That's the only way to get Sprintbootanimation back.
Backup your EFS first!!! Just to be safe - In the FAQ
A dialer reset may be required for a lot of the issues. In order, easy to most invasive.....
##UPDATE#
or
##SCRTN#
or the biggie - which fixes bootani and Wifi calling
##RTN# - requires your MSL. You will need to either call Sprint. Or, follow THIS

V2 is still uploading. First upload had issues.
Gimme about an hour
Edit: V2 is in the OP
I'll post the modem and whatever extra files in post #2 later. Enjoy
Edit #2: ZVA modem and other info in post #2
Edit #3: Navel Kernel doesn't work with this. Gimme some time as I need to upgrade my Linux and I'm starting from scratch for it. Just cuz I know git a little better now.

Flashed this while at work and working fine, menu page feels a bit snappier.
Thanks for all the work Engine!

engine95 said:
V2 is still uploading. First upload had issues.
Gimme about an hour
Edit: V2 is in the OP
I'll post the modem and whatever extra files in post #2 later. Enjoy
Edit #2: ZVA modem and other info in post #2
Edit #3: Navel Kernel doesn't work with this. Gimme some time as I need to upgrade my Linux and I'm starting from scratch for it. Just cuz I know git a little better now.
Click to expand...
Click to collapse
I must flash the modem after flashing the rom?

Your decision really. I don't think there's much difference between them. But who knows.
At least we have 2 choices now for lollipop.

engine95 said:
Your decision really. I don't think there's much difference between them. But who knows.
At least we have 2 choices now for lollipop.
Click to expand...
Click to collapse
Is Wifi Calling removed in this? I see WifiOffloader was removed, but not sure what that is.

Jimmy50941 said:
Is Wifi Calling removed in this? I see WifiOffloader was removed, but not sure what that is.
Click to expand...
Click to collapse
It's still there. Don't go by the apps removed.
Edit. It's enabled in the status bar. No longer an app. So to speak.
If you don't have it, read the OP in the stock zva thread, I think.

Installed perfectly...like always. Thanks for all your hard work.
BETEO

engine95 said:
It's still there. Don't go by the apps removed.
Edit. It's enabled in the status bar. No longer an app. So to speak.
If you don't have it, read the OP in the stock zva thread, I think.
Click to expand...
Click to collapse
Awesome I didn't install it yet lol I was concerned because I have to use Wi-Fi calling if I need to use my phone at work. I generally have no signal otherwise.
Now we just need nAvel Kernel! lol
Sent from my LGLS990 using XDA Free mobile app

Jimmy50941 said:
Is Wifi Calling removed in this? I see WifiOffloader was removed, but not sure what that is.
Click to expand...
Click to collapse
WifiOffloader is Sprint Connection Optimizer. Be glad it's gone. It's a RAM hungry beast :silly:
Also, props for this. Exactly what I wanted. Slimmed down a bit but everything working.
If I wanted to add LG Health back in, do you know what files I would need for that? It's the only LG app I actually use/like.

You would need at least...
lifetracker
Concierge
My Heath
At the minimum.
It's probably easier to install V1, then remove the apps I have listed. But be careful of any of the overlay files and the LIA....
along either LG AP???

Ok check this out. I have been thru hell and back rooting and activating this G3 to ATT ST sim the last 24 hours - not to mention the damn edits for apns and network swaps and finally I got Twrped... In all the volumes of threads I have read I haven't seen where to store our .zips prior to flashing a new rom. I have been out of the game for a minute and although it's good to be back I am wary because I am used to always having my external sd and a computer with Wi-Fi. I am Zv8 but 5.0.1 so is this even the right rom or should I dig deeper...? I just need stability and a wee bit of guidance. Twrp recovery is awesome but Damn is it trippy and if I know where to store the Rom.zip and modem I will feel more comfortable wiping everything as my nandroid is at least a functio ing rom with signal...
I know it's totally noob and shiz but my poor brain cannot digest anymore. But I am so look close! Anybody? And thanks for the patience AND understanding!

Just a quick question
Version on my phone is reading as 5.0.1, but IIRC this was a slight bump to 5.0.2. Is that normal?

Thank you for this! Just flashed and everything went smooth. I did flash the ZVA modem after the ROM and now that I'm attempting to re-install my apps, I have noticed the data is horribly slow. Took ~90 seconds to down Titanium Back Up which is only 7mb. I'm flashing back to ZV8 (fairly sure I had ZV8 prior) now and data should be back to normal.
EDIT: Flashed ZV8 modem, still really slow data. Not sure what the deal is, going to let the phone settle and see if that helps any.

dyliho said:
Ok check this out. I have been thru hell and back rooting and activating this G3 to ATT ST sim the last 24 hours - not to mention the damn edits for apns and network swaps and finally I got Twrped... In all the volumes of threads I have read I haven't seen where to store our .zips prior to flashing a new rom. I have been out of the game for a minute and although it's good to be back I am wary because I am used to always having my external sd and a computer with Wi-Fi. I am Zv8 but 5.0.1 so is this even the right rom or should I dig deeper...? I just need stability and a wee bit of guidance. Twrp recovery is awesome but Damn is it trippy and if I know where to store the Rom.zip and modem I will feel more comfortable wiping everything as my nandroid is at least a functio ing rom with signal...
I know it's totally noob and shiz but my poor brain cannot digest anymore. But I am so look close! Anybody? And thanks for the patience AND understanding!
Click to expand...
Click to collapse
Anything gsm, I can't help you with that. Maybe for you, pull the ext sd out just to take it out of the equation.
Then do everything with internal sd.
FrankBooth86 said:
Just a quick question
Version on my phone is reading as 5.0.1, but IIRC this was a slight bump to 5.0.2. Is that normal?
Click to expand...
Click to collapse
As far as I know, this is just a patch update. 5.0.1.
InfiniteReality said:
Thank you for this! Just flashed and everything went smooth. I did flash the ZVA modem after the ROM and now that I'm attempting to re-install my apps, I have noticed the data is horribly slow. Took ~90 seconds to down Titanium Back Up which is only 7mb. I'm flashing back to ZV8 (fairly sure I had ZV8 prior) now and data should be back to normal.
Click to expand...
Click to collapse
Make sure you update profile/prl after installing the modem. My reception always sucks. So I never know if it's better or worse.
Maybe try flashing the zva rpm,tz partitions? I haven't even messed with those. I just made then flashable just in case.
You can revert back to the zv4/6 ones if need be. I think they're in the zv8 threads.

engine95 said:
Make sure you update profile/prl after installing the modem. My reception always sucks. So I never know if it's better or worse. Maybe try flashing the zva rpm,tz partitions? I haven't even messed with those. I just made then flashable just in case. You can revert back to the zv4/6 ones if need be. I think they're in the zv8 threads.
Click to expand...
Click to collapse
I did update the PRL/profile afterwards, both after ZVA and after I went back to ZV8. No real change in speed. The LTE star almost never stops spinning... I tried to install the Nest and takes forever to start actually showing it downloading, finally it did and least 1min into it I'm at 448KB. I'm fixing to flash the ZV8 partition and see if that helps. If nothing, I'll do another full wipe and install again. BTW I'm coming form latest BarePop prior to BarePapA

InfiniteReality said:
I did update the PRL/profile afterwards, both after ZVA and after I went back to ZV8. No real change in speed. The LTE star almost never stops spinning... I tried to install the Nest and takes forever to start actually showing it downloading, finally it did and least 1min into it I'm at 448KB. I'm fixing to flash the ZV8 partition and see if that helps. If nothing, I'll do another full wipe and install again. BTW I'm coming form latest BarePop prior to BarePapA
Click to expand...
Click to collapse
Well, you can always try, ##UPDATE# in the dialer. If no luck, then, ##SCRTN#. These 2 are pretty safe. But always make sure you have a backup EFS.

engine95 said:
Well, you can always try, ##UPDATE# in the dialer. If no luck, then, ##SCRTN#. These 2 are pretty safe. But always make sure you have a backup EFS.
Click to expand...
Click to collapse
Work computer is having hicups, can't copy anything via USB to phone. Flashed back to BarePop and all is good (still can't USB to work computer). Going to full wipe and install BarePapA and see what happens. Thanks for the quick replies!

WOW!!
I did a clean install of this yesterday and I must say GOOD WORK!!! running great and buttery smooth as usual!!

Related

[ROM]SmoothCriminal-Sense 3.6-Sprint 2.89.651.2 [UPDATE 12/11]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​I want to start by saying that this is my first ROM; so if it's not perfect please leave a comment with a logcat. I will do what I can to resolve any issues that may exist.
DISCLAIMER: I will not be held responsible for anything that may happen as a result of flashing this ROM. Your brick, your problem! Please do not skip perhaps the most important step and that is to do a Nandroid Backup PRIOR to flashing this. I have had no issues with this ROM and it has been thoroughly tested on Hboot 1.58, Jbear Hboot 1.50.5050 and ENG Hboot 1.04, It should work on other Hboot versions.
That said this ROM includes work from many developers. I have made every effort to give credit where it is due, but if for some reason I overlooked you please notify me and I will add you to the credits. Lastly, it is my belief that I have only included work with no usage restrictions, but if for some reason you feel that your work should not be included please just PM me and I will correct the situation.
Features:
Based on Sprint OTA (2.89.651.2)
ButteredtoasT Kernel
CPU overclocked to 1.5GHz (QualComm default)
GPU 3D overclocked to 300MHz (QualComm default)
GPU 2D overclocked to 266MHz (QualComm default)
Sweep2Wake/Sweep2Sleep /w Capacitive lights enabled
Beats® by Dre
BRAVIA/XLoud/Play Station® Certified
Dolby Mobile
Extended power settings (Power off, Restart, Screenshot, Airplane mode, and Mobile network enable/disable)
3D Camera/Camcorder
4G
Fixed app associations
Extended quick settings
Camera Mods: HDR, panorama, 1250 ISO, fast-click, front cam 720p recording, sharpness mod and more!
Google Now for ICS offline/online
5x4 Rosie
WiFi Tether (to use go into settings and select Generic ICS wLan0)
OTA Updater
Jellybean 4.2 Keyboard
*Depreciated* GMail for Jellybean 4.2
Increased 4G Speeds
Roam Only Option available
SmartSync disabled (data should be uninterrupted after midnight)
3D home screen (display options)
*Needs testing* TV Out (display options)
and more!
Known Issues:
​Hot Reboot is not properly functioning
*FIXED* Name/Phone number off center in dialer (most likely due to changes made to add Roam Only)
Changelog:
Code:
[B][URL="http://d-h.st/T5I"]v-2.3[/URL][/B] SmartSync Disabled (Data connections should now be uninterrupted at night)
TV Out enabled in display settings *needs testing*
[B][URL="http://d-h.st/PoM"]v-2.2[/URL][/B] Kernel updated to ButteredtoasT RLS 13.6
Titanium Backup added
Kernel Tuner added
Fixed Caller ID being off centered (gruesomewolf)
Fixed App associations ([URL="http://forum.xda-developers.com/showthread.php?t=1694957"]Guide by Steal25[/URL])
[B][URL="http://d-h.st/ZTm"]v-2.1[/URL] [/B]Roam Only option added ([URL="http://forum.xda-developers.com/showthread.php?t=1451331"]Guide by Freeza[/URL])
Increased 4G Speeds (WiMax Baud Rate Hack by Cobraboy85)
[URL="http://d-h.st/p8g"][B]v-2.0[/B][/URL] Updated kernel to RLS 13
Now compatible with older Hboot versions, tested on ENG Hboot
Updated apps
Included Gmail for Jellybean 4.2
[B][URL="http://d-h.st/u42"]v-1.0.5[/URL][/B] Update for current users, if you wish to use this download 1.0.4 from the Download link
Jellybean 4.2 Keyboard (Credit unknown)
YouTubeHD (Credit unknown)
Updated system apps
Misc build.prop changes
[URL="http://d-h.st/Ho3"][B]
v-1.0.4 [/B][/URL]Beats® by Dre
Beats® boot animations
Updated SuperSU
[URL="http://d-h.st/vrK"][B]
v-1.0.3[/B][/URL] Kernel updated to RLS9
BusyBox updated (Should resolve issues with AdAway)
Misc build.prop edits
[URL="http://d-h.st/Kg4"][B]
v-1.0.2 OTA Test [/B][/URL]​Corrected updater-script
This contains no new features, it is only a test for OTA functionality
To download please get v-1.0.2 then update via OTA, please report results
[B]
[URL="http://d-h.st/oBo"]v-1.0.2[/URL] [/B]Added Bravia/XLoud/PlayStation® Certification
Added OTA Updater (Testing)
Removed FB Chat, FM Radio, Footprints, Ring Tone Widget, Removed Ring Tone Trimmer,Tell HTC, Tasks, Stocks, Reader, Peep, Media Share, Jetcet Print, Google+, and a few more "useless apps"
Removed Pre-installed E-Books that I missed in previous builds
Updater-Script incorrectly says v-1.0.1...oops
[B]
[URL="http://d-h.st/8p5"]v-1.0.1[/URL] [/B]Updated market apps
Updated Sense apps
Incorporated butteredToasT -bigwillyg
Various .xml edits to accommodate 5x4 Rosie
Incorporated "Smooth Criminal" wallpaper into HTC wallpapers
[B]
v-1.0[/B] Sprint 2.89.651.2 710RD Base
rooted (SuperSU)
Busybox installed
Deodexed
Removed Sprint bloat
Leedroid Tweaks -JoelZ
Google Now - mikeyxda
Camera Mods - coolexe
Added ES File Explorer and WiFi Tether
Disabled MMS compression - SteelH
Installation:
​1) Reboot into recovery
2) Perform backup
3) Format all partitions except SD card (Once installed you can "dirty" flash updates)
4) Flash .zip from SD
5) Reboot and profit!
IF YOU ARE HAVING ISSUES AFTER RESTORING TITANIUM BACKUP READ THIS AND THE FOLLOWING​
ftc_osiris said:
There can be an issues with several system data restores when changing bases (or just in general) that may look like a ROM issue but are not...
Just a FYI to anyone who flashes to the new base and gets problems that Titanium Backup may be the cause. Just go into TB and clear the data for the malfunctioning application (easier than wiping and trying again then).
Click to expand...
Click to collapse
Initial boot can take several minutes, please be patient...throwing your phone will not make it load faster!
Download!
Mirror
MD5 Sum: 2d109473a336a26d5b9658a52603450d
Enjoy and please provide feedback, good or bad, all I ask is that it is constructive and detailed
More screenshots to be posted later
ADDITIONAL DOWNLOADS!
Oftentimes to resolve community issues I make private releases for testing. Rather than keeping these private I will give everyone access to everything. Everything is use at your own risk, and tests of unknown stability will be noted as such in the description.
Thank you's:
KernelChef- For his contributions to butteredToasT
NineInchNails- For telling me to "Google it"...might have taken longer but at least I learned it!
bigwillyg- For allowing me to use his kernel
JoelZ- For porting Leedroid Tweaks to shooter
Freeza- Roam Only (and enduring my relentless barrage of questions)
mikeyxda- For Google Now
coolexe- Camera mods, contributed towards getting Leedroid Tweaks to work with 2.89 base
SteelH- MMS compression disabled
XxXPachaXxX- BRAVIA/XLoud/PlayStation® Certified
lyapota- Beats®
Binux-Project- Boot Animation and Splash
Cobraboy85- WiMax Baud Rate Hack
Thanks to KernelChef and beneath-a-burning-turtle for helping with Hboot compatibility!
gruesomewolf
Special thanks to my testers, your help saved me A LOT of time
Ramjet73 (ENG Hboot 1.04 and Jbear 1.50.5050 confirmation)
mnomaanw and wcctom (confirmed HBoot 1.58)
If I forgot you, I am terribly sorry. Please send me a PM and I will add you to my OP.​
Looks interesting!
I'll give a try.
ramjet73
Honest criticism is always appreciated good sir
Up and Running
Wouldn't boot with the engineering (ENG-1.04) bootloader so I switched to JBear 1.58.5858 and it's booted now.
Can't seem to get Adaway to save the hosts file properly. Might have something to do with permissions, but I've never had a problem with it before.
I'll keep testing.
Edit:
Adfree seems to work. Couldn't figure out problem with Adaway.
Status showed null connection for Wi-Fi, and had to reset.
Performance seems very good so far.
No beats. Assuming that's by design.
OTA app keeps wanting to update but it looks like the same version. NVM, figured it out and downloading now.
Update downloaded and installed fine (had to manually select .zip from /sdcard/ota-updater directory).
Adaway still doesn't work after OTA update.
ramjet73
ramjet73 said:
Wouldn't boot with the engineering (ENG-1.04) bootloader so I switched to JBear and it's booted now.
Can't seem to get Adaway to save the hosts file properly. Might have something to do with permissions, but I've never had a problem with it before.
I'll keep testing.
ramjet73
Click to expand...
Click to collapse
I just installed AdAway and had the same thing happen, fixing permissions did not remedy this. Im gonna try the work around in the about section.
No beats, by design. Perhaps in the future though
Nice I wanna try it
Sent from my PG86100 using xda premium
Great work sir! I will testing this rom later! :thumbup:
*EDITED* why you removed fb chat and, peep? It so important for me
Sent from my PG86100 using xda premium
ramjet73 said:
Wouldn't boot with the engineering (ENG-1.04) bootloader so I switched to JBear 1.58.5858 and it's booted now.
Can't seem to get Adaway to save the hosts file properly. Might have something to do with permissions, but I've never had a problem with it before.
I'll keep testing.
Edit:
Adfree seems to work. Couldn't figure out problem with Adaway.
Status showed null connection for Wi-Fi, and had to reset.
Performance seems very good so far.
No beats. Assuming that's by design.
OTA app keeps wanting to update but it looks like the same version. NVM, figured it out and downloading now.
Update downloaded and installed fine (had to manually select .zip from /sdcard/ota-updater directory).
Adaway still doesn't work after OTA update.
ramjet73
Click to expand...
Click to collapse
OK I found a work around that seemed to work. I am going to reinstall and try this again, just to make sure I have it right
1)Go to the market and update busybox
I am going to clean install and double check this now
*EDIT* Confirmed Busybox needs to be updated I will include new busybox in OTA coming tonight (10/23 PM)
tukijembz said:
Great work sir! I will testing this rom later! :thumbup:
*EDITED* why you removed fb chat and, peep? It so important for me
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
v-1.0.1 Has both apps. I plan to add Aroma in so users can pretty much use what they will...I just needed to make the ROM a little lighter for now
Looks real solid man, I'll try this one of when I get some other stuff squared away. Seems real promising, this rom is gonna go far, I can tell :good: if you ever need any help, drop me a pm, I'm always around to help
Be there or be square with Tapatalk 2
beneath-a-burning-turtle said:
Looks real solid man, I'll try this one of when I get some other stuff squared away. Seems real promising, this rom is gonna go far, I can tell :good: if you ever need any help, drop me a pm, I'm always around to help
Be there or be square with Tapatalk 2
Click to expand...
Click to collapse
Being my first time out, I will need all the help I can get! Thanks!
I sent you a PM dude
ItzCrooK2UxD said:
v-1.0.1 Has both apps. I plan to add Aroma in so users can pretty much use what they will...I just needed to make the ROM a little lighter for now
Click to expand...
Click to collapse
Don't forget to add any mod sir
May you roms got brilliant :thumbup:
Sent from my PG86100 using xda premium
tukijembz said:
Don't forget to add any mod sir
May you roms got brilliant :thumbup:
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Im gonna be uploading an update here soon. Updated busybox, updated preinstalled kernel, some build.prop changes (HTC Updates are a PITA), I still haven't started on the Aroma (been busy with real life) but it is a feature being worked on so that those who like Peep and the FB chat widgets can still have them installed
Update has been uploaded. If you still have SmoothCriminal installed you can use the OTA Updater to get the update. OP has been updated, enjoy!
Hello everyone,
I haven't flashed a new Rom in a very long time but I am interested in this one.....can someone refresh my memeory on what to do? I am stock everything and relocked.
Sent from my PG86100 using xda app-developers app
blacktrump1974 said:
Hello everyone,
I haven't flashed a new Rom in a very long time but I am interested in this one.....can someone refresh my memeory on what to do? I am stock everything and relocked.View attachment 1429100
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Theres a guide for "jbears S-OFF" Stickied in this forum, follow that to get s-off (true root) then you will want to flash Superuser (root), install a recovery (cwm or 4ext...I use 4ext) Boot to recovery, and do a nand backup...and go flash happy. Get S-OFF is step one...so go grab a piece of wire! BTW it is worth finding the piece of wire...I used a wire hanger bent and wrapped in electrical tape
*EDIT* added links for simplicity. Those guides will get you where you need to be in order to flash
Also if you have the HTCDev unlock token from before, I believe you can still use it now.
Is it possible to have the OTA update with small patches/fixes?
That way we dont need to download the whole ROM. Its PITA for users with slow connection.
mnomaanw said:
Is it possible to have the OTA update with small patches/fixes?
That way we dont need to download the whole ROM. Its PITA for users with slow connection.
Click to expand...
Click to collapse
Yea, as a matter of fact I believe I can do that. It would certainly be easier on the SD card. Thanks for a great suggestion.
One question: Does this support text size changes through settings/display/text size?
Sent from my PG86100

[ROM]FOXHOUND DIAMONDDOGS 3.65UPDATED4MDKtoMK2&AnyCarrier-SS-NOKNOX-CLEAN-FAST-THEMED

[ROM]FOXHOUND DIAMONDDOGS 3.65UPDATED4MDKtoMK2&AnyCarrier-SS-NOKNOX-CLEAN-FAST-THEMED
Gogolie'sROM Port: Foxhound Diamond Dogs 3.6 MDK THRU MK2 COMPATIBLE & ANY CARRIER COMPATIBLE = VZW - AT&T - TMO - SPR THERE IS NO FORCED KERNEL OR MODULE INSTALL! (NECESSARY FOR SAFESTRAP PLEASE MODERATORS DON'T MAKE ME INCLUDE ONE ITS NOT NECESSARY FOR OUR PHONES!)
This very quick little TW rom is awesome its my daily. New update allows for zip install to any slot on SafeStrap or through any custom recovery. AT&T and other carriers may need to flash your MK2 modules or add in TMO APN/ AT&T APN / SPRINT APN settings to get this beast working 100%. If that didn't fix your problem then you need to install the GSM / LTE carrier modem (just guessing that your GSM if you can't get this going as thats been only complaint of lost data and he was able to fix it with proper carrier modem). If these options are too difficult I'll be posting my own comp packs for major carriers below in download sections zip install immediately after installing ROM.
Known issues/Not Working (only for select users):
No known issues exist, if you find a reoccurring bug that has not been addressed here or in the Int section please post.
Issues with not having "stockish on stock slot" may occur by having a heavily modified/themed ROM in stock slot using SafeStrap.
If it doesnt work for you I'm sorry your best bet if your on VZW is SS but with thousands of downloads and hardly any issues across the board with the 1st release I think that speaks for itself... ALL My ROMs rock and are fixed ports or originals and bug free for me or I wouldn't release them. Otherwise this thread would be a mile long like some other Roms that need constant support! Enjoy took me some time to put together so if it works thank me or better yet donate so you can see updates and more roms!
This is a port of the Foxhound Diamond Dog Team's v3.6 w/ ML6 base using a essential only install w a lot of mods and a clean diamond boot animation, included 4.4 apps and a sound/volume mod with the ultra sharp Foxhound theme. Updated all parts of ROM like Xposed / Play Store ect that were giving users some issues before.
Remember I myself nor XDA is responsible for any actions or mistakes or decisions you make with your phone. Installing a custom ROM is a personal decision I say flash it all but thats my decision. However a bit of insight would tell you there is no kernel forced installed like most ROMs try to do so there is much less chance of any errors or issues or bricking because of this. I recommend installing MK2 stock or your favorite kernel and trying and experimenting with this yourself.
Lil about me: I'm a now broke, technically I'm disabled (w/ 4 crushed discs in spine the gov says I'm too young to get disability and shouldn't admit that MMJ medicine works for me they=heartless pricks)I'm a full time single parent of a 1 yr old so Idon't get a lot of time for my passions anymore. ex award winning programmer (lost the love for it, be sure to copyright anything you intellectually own especially when it comes to working with G or MS. they'll steal your everything claim you signed it over and hang you out to dry) now i'm just a fellow android lover with a knack for making things work when they normally won't, experimenting, coding,scripting, anything I feel like doing so if this or any of my other creations or additions to your phone helped you in any way help keep my kid in fresh diapers or put a beer in my hand please. Anything is better than nothing I have spent countless hours learning testing and everything in between to bring you cool stuff like this. Thanks!
PS Sorry to all the fans of my ROM ports I had promised updates and made them but wasn't able to post on here because I didn't offer support or own a sprint phone (even though I fix/root and install my roms for customers of my home business on all national carriers without issues:!) Let em hate eh if I suddenly vanish and stop responding or supporting my threads (give me a few days to respond to PMs and questions) or my accounts not active find me at Infamous Forums. Thanks again for all the donations and support. I do this for the users that like their phones to have options. Not for the money or fame (LOL get treal i love the accusations they funny but come on play nice other devs lying about my stuff)
NEW DOWNLOADS: (Install .zip in any Custom Recovery. Tested on Philz and TWRP.)
UPDATED ZIP FOR "GOGOLIE'S UNOFFICIAL SLIM" VERSION 3.65: LINK(Ignore the .zip header info it says Phoenix 7.3 I forgot to modify its not it is Foxhound DD 3.65 too much work being done to update)
NEW WALLPAPERS TO TRY:
#1, #2, [URL="http://feb.imghost.us/G7oG.jpg"]#3[/URL], #4, #5
ALTERNATIVE LOCKSCREENS:
#1
OPTIONAL GPS FIX INTL: LINK (thx poeypresents/thedoman/jrkruse)
MORE DLs SOON LIKE COMP PACKS FOR SPRINT, TMOBILE AND AT&T **THESE ARENT NEEDED TO INSTALL IF OP IS FOLLOWED
OLD VERSION Download SS/TWRP Install by Restores:
https://docs.google.com/uc?id=0BwL6-n3ZMcedTzY1WFJ4N1dEQ2s&export=download
or
https://docs.google.com/file/d/0BwL6-n3ZMcedTzY1WFJ4N1dEQ2s/
Install:
Unzip into your new SS backup dir into your backup Safestrap folder in a folder like gogolies-Foxhound3.6 make sure all files are simply in 1 folder and that folder is in your backup directory and restore to a ***blank/newly created or STOCK*** rom slot. I went super small as small as SS would allow for slot creation. If your getting an error on restoring be sure to try deleting the slot and re-adding it then restoring the system files. If your WiFi doesn't work try flashing MJ7 or MK2 SS modules but only flash modules after 1st booting up rom and knowing wifi isnt working. 1st boot takes time plz allow a minute after loading up 1st time after 1st boot. Startup time is fastest SS rom I've seen. FH Apps and Settings contain xposed and modules for it and can help u customize and tweak it a bit but are installed as system files and don't let you update easily but it can be done I suggest just leaving it until another release or read down in the thread for details on how to update if you must..
Special thanks to: you fools that downloaded this to help test and found little to no actual issues... or specific user issues... THCX boys!
Surge1223, Hashcode, rarffaele88, snakes, jrkruse, ktoonsez,open1your1eyes, sbreen94, k1mu, old&slow, beanstown106, Dubbsy, invisiblek, nitroglycerine33, jovy23, andybones and anyone else contributing anything toward development!
-gogolie
Screens from VZW:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Below is a copy of what raffaele88 said in his original thread please thank him and anyone associated.
raffaele88 said:
Based on last firmware
Deodexed & Rooted
Unlimited SMS recipient list
Disabled scrolling cache
Removed bloatwares (Available on zip)
Large APN list
Insert Xposed Framework
Battery 1% mod
Insert module for Xposed
DPI Changer
Market multi DPI inverted
Rom are Themed and costumizable with Xposed
Insert Rom Control in Settings
Enabled Call recording
4 Way reboot (Recovery,Download…
Hacked Stock Email App
Latest SuperSu update
Ota Update
Enabled all supported languages
Enabled call button on Contacts list
Auto wipe cache & dalvik-cache before flashing
Insert back button in Browser
Removed boot sound
MultiCSC
Busybox
More...
Installation
Full wipe or without wipe
Essential Rom or Normal
Theme
Foxhound Black theme
Samsung
Keyboard*
Google
Samsung
Camera*
Samsung
Google
Kernel
Stock
faux
Launchers
Nova launcher
Apex
Touch Wiz
Performance Mod
SQlite
EXT4
GPU
Boot Animation
FoxHound Diamond Dogs
Google edition
Font
Foxhound (smaller)
Stock
Google Edition AOSP 4.4 Kitkat
Calculator
MMS
Calendar
Clock
Sound Mod
Viper4Android
Boost Audio
* Both application can be installed
1.Downalod Rom
2.Put in your Phone memory
3.Reboot in Recovery
4.Wipe data in you came from other rom (optional)
5.Select Zip and install
6.Reboot enjoy
LINK
Donate Rya Engel: Link
Donate Denny: Link
Rixsta for theme base link
Nottach for module link
Wanam for kernel
Rovo89 for Xposed framework link
Vertmus for Domination theme
Click to expand...
Click to collapse
Dude you are awesome!
Sent from my SCH-I545 using XDA Premium HD app
looks absolutely amazing man! I will be hitting this up on my next day off, thank you for this!
im confused where to place the folder once i download the zip. i dl'd the zip. extracted it to my phone. made slot 2. went to restore in SS but cant find the folder to restore? how do i go about this?
chrismyu said:
im confused where to place the folder once i download the zip. i dl'd the zip. extracted it to my phone. made slot 2. went to restore in SS but cant find the folder to restore? how do i go about this?
Click to expand...
Click to collapse
unzip the file you just downloaded into the folder where your backups are saved. for me its TWRP>BACKUPS>6056c852.Then you select rom slot 2(or make a slot 2).In the main menu select restore and you should see the file you unzipped with the rest of your backups if you have any. I just did it and this maybe my new favorite! Hope this helps you out
Downloading!
Sent from my SCH-I545 using xda app-developers app
This looks very nice. Looks like I may be updating to mk2 if /when I find the time. Thanks
Sent from my SCH-I545 using XDA Premium 4 mobile app
Working great on MK2 SS AT&T S4!!!!!!!
Is there a possibility of a version for those of us still running mdk/lokid?
Sent from my SCH-I545 using Tapatalk
Mine keeps failing, says no partition selected.
The rom is great but it keeps screwing with my hangouts. One minute it'll work then the next it won't show
Sent from my SCH-I545 using XDA Premium HD app
How do I increase the system partition, when I hit the + sign nothing happens.
Looking forward to another choice!
It looks like a very slim and smooth rom but still packed with features we need. But may i ask why rom slot 2? What, your roms too good for slot 1? , Also, how many ppl on MJ7 have tested it without updating? (Just curious). Thanks again for the new toy!
Got this one up and running and I suppose the others I had tried in the past would work now to.
After some input in various threads by @Surge1223 , it came to my attention that I should try ODIN back to MJ7 and stick there instead of updating to the MK2 bootloader if wanting to run HD RLS12 in stock side which is my preference.
After I did that and restored my Nandroid of HD RLS12 to stock side then had to apply the MJ7 module, all was well.
Created a slot, and this time was able to get this up and running via restore to slot. 1st time of success with that with any ROM whether via Nandroid Restore or flashing to.
Monkeying around with it now, so far so good. One thing I notice is with Xposed Installer, In the settings under 'update' , there is an update available for it but it won't install - says something about package with that name and different signature found.
---------- Post added at 08:43 AM ---------- Previous post was at 08:23 AM ----------
Update: Root Explorer shows nothing as in will not load up directories just black screen?
Update #3: Nevermind about Root Explorer. User error. I mistakenly restored app & data from it via TIBU. I uninstalled and restored App only and all is well now!
shindiggity said:
How do I increase the system partition, when I hit the + sign nothing happens.
Click to expand...
Click to collapse
The system partition size is pre-set in the app code. To my knowledge you can't resize it. Maybe if you rewrote the script but im not there yet. Ppl tend to forget safestrap 3.7x is still beta.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
seems like a sweet rom. I havent had time to restore my apps and what not but im looking forward to a test drive. On MJ7 btw...
Restoring this ROM to my slot failed. I'm rooted on MK2 with SS 3.71 installed. Was able to load the Omega ROM, but not this one.
Sent from my SCH-I545 using xda app-developers app
This ROM is awesome! Super slick and good looking.
You may want to put this in your instructions.
If you can't find where the backup folder is go into safestrap and make a backup of the cache on stock ROM.
Then extract the .zip file to the folder with the cache backup and has allot of numbers and letters on it.
Sent from my SCH-I545 using XDA Premium 4 mobile app
rslu2 said:
Restoring this ROM to my slot failed. I'm rooted on MK2 with SS 3.71 installed. Was able to load the Omega ROM, but not this one.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I know I said I wouldnt be offering support on this one but since you were kind enough to try my first omega version that and I really really like this rom over any others and I've ported a good 10 new ones to the phone now
have you tried deleting the slot and then remaking it? not sure why but that seems to work if its failing restore. then just restore system files I actually just had to do this earlier after finishing up omega v19 sorry I am not able to see whats the issue I believe its something with the way safestrap is "formatting" or something. hope that helps no Idea if that doesnt work you might be in the restoring boat like lazer9 had to do that method will work for those unable to install this as is. odin mj7 reroot then ss then whatever. Oh and you don't have to put this on Slot 2 I just included it incase it still mattered in safestrap whether or not you restored to same slot but it does not matter apparently. So install to any slot should work fine probably even stock if someone dared try? same with MJ7 users just flash modules if it doesn't boot up first try. obviously theres some different issues with various parts of the rom plz continue to post your findings guys. I promise nothing but I'll help if I can.
I found the first problem,
For me you can't download apps from play store, any tips?
Sent from my SCH-I545 using XDA Premium 4 mobile app

[ROM] BarePop - ZV8

Well here's the continuation of BarRin. But now with ZV8!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents...​
Courtesy of and Thanks to @BonezMontana!!
See post #2 for additional files
See post #3 for possible bugs/ issues and fixes
Anyone can use this as a base to build from. Just give credit.
What is has:
This is the ROM, Kernel, Modem, and rpm,tz partitions
Rooted
busybox
Install
In TWRP, select Advanced, Wipe, then /system, /cache, /dalvic, and /data.
You can wipe internal and ext SD. BUT MAKE A BACKUP OF YOUR FILES FIRST!! And don't wipe Ext SD with TWRP. Format it FAT32 on a computer.
Flash Rom
Update profile/prl
Go to "Settings, More, Mobile network, and select anything but "Global
"L" needs to settle in. Don't get in too big of a hurry adding all your apps.
Change logs :
Code:
[B]BarePops_Updates_DPI-580[/B]
Nothing big, Just changing the DPI to 580. With Updates_V1 included
[B]BarePops_Updates_V1[/B]
Just a little update that should work with Any/All ZV8 Rom - dirty flash OK
Stock kernel with init.d support
init.d scripts - sqlite3 and zipalign for /data/apps only
build.prop tweaks - not really sure about these, but we'll see
[B]TE_V1 - Themers Edition[/B]
Same as V2 +
As deodexed as it can be - LGSettings isn't working deodexed yet
Updater-script change - lets see if this fixes some install issues for some
NOW USING ZV4/6 rpm,tz partitions - should fix restores to KK Roms and some reboot issues
[B]V2[/B]
Same as below +
More bloat removed - Weather and Concierge/SmartCards gone
SD Card fix
[B]V1[/B]
Odexed
Removed most Sprint and LG Bloat and tattletales
Apps moved to /data
Oversharpening fix
busybox - trying a different way because L in so new. Updatable through this app.https://play.google.com/store/apps/details?id=stericson.busybox
removed Sprint boot ani and sounds
increased mixer paths
fixed build prop - All Splitwindow, increased Qslide
Concierge board and LG Weather are still in it
Donators - THANK YOU - Never asked for, but very much appreciated!!!
@budeone
@AlwaysLucky
@nkyer
@RustedRoot
@mjjcb
@cabbieBot
@AcE XBOX
 @FerretPD
__________________________
Downloads - Full Roms:
BarePop_TE_V1 - Themers Edition - Deodexed - Full Rom - Clean install - Rom, Kernel, Modem, ZV4/6 Partitions
Just another flavor - As deodexed as we can for now.
Possible issue- on install, Apps may automatically hide. Just choose show in settings.
BarePop_V2 - Full Rom - Clean install - Rom, Kernel, Modem, ZV8 rpm,tz Partitions
BarePop_V1 - Full Rom - Clean Install - Rom, Kernel, Modem, ZV8 rpm,tz Partitions.
__________________
Downloads - Updates for all above
Barepops_Updates_DPI-580
BarePops_Updates_V1 - Just an update for the above Roms and it SHOULD work with any ZV8 Rom. Dirty flash is just fine
XDA:DevDB Information
BarePop, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-02-20
Last Updated 2015-02-19
Additional files
Additional files and what-not's​For V1 or Stock. V2 already has it SD_Card_fix - This should fix the SD Card issue people are having. But if not, see Post #3
For V1 only SmartCard_fix - This will fix Smart Cards/Notifications in V1. Just flash it.
This SHOULD work for ANY ZV8 Rom. ZV8_Stock_init.d_Kernel - if you are stock, you may need busybox installed.
To see if it's working, in a rooted explorer, look in /data and see if it has "Test.log."
For any ZV8 stock based ROM. BarePop bootani Courtesy of @HPTesla
If you have issues installing it, see post below.
Can't download anything? Flash THIS - stock host files.
Bugs/Possible issues and fixes​
To remove the Sprint boot animation​If you want to remove the Sprint bootani. Or just be able to install a custom bootani. You will need to do this:
1. In a rooted explorer, go to /carrier/cust/poweron/ and delete those files so the folder is empty.
2. Then do the same with /carrier/cust/poweroff.
3. Go to /system/media and delete the "Sprint_bootanimation.zip". Make sure you leave the "bootanimation.zip" in there.
4. If you don't have anything in the /carrier/cust/ poweron/poweroff folders, don't worry.
If you use Flashtool, they will be there again. That's the only way to get Sprintbootanimation back.
Read this post also. ​ Cleanest install​
This will give you the cleanest install without using Flashtool.
Of note, if you do this, when finished, you'll need to reinstall the ROM. The apps in /data get wiped. So you will be missing some stuff.
Bugs/Possible issues:​1. This is gonna sound weird, but....sometimes it boots too fast and the lockscreen will freeze. Just give it a minute. All is well
2. The LG Keyboard, may not be able to be removed until it is updated by LG. It can't be moved to /data yet - Just be aware if you remove it.
Install, TWRP, Reception​I don't know if it's a TWRP thing or not. Here's what I've seen, but it is few and far between but does happen on occasion:
1. As was said earlier, if you need to wait longer than 5 min to get the setup screen, you'll need to pull the battery. Then you can try and flash it again dirty, or do all the wipes again and it'll flash. Really weird.
2. Rarely, but when making a backup in TWRP, it'll take forever. I just pulled the battery, rebooted to the ROM, and let it sit for a few minutes. Then the backup worked fine in TWRP.
3. Sometimes reception just wont work. So update profile/prl and if it still doesn't work, reboot and update them again. That will fix it. And I'm using the rpm,tz partitions.
I don't recommend pulling your battery while in recovery, but sometimes you just have too. Just be forewarned you may need to use Flashtool to fix it.
I've been using TWRP 2.8.3 I think is the version.
SD cards​SD cards are becoming an issue for some reason. If you've followed ALL the instructions in the OP, and are still having issues, you may need to wipe your ext SD. And sometimes Internal as well.
Some people are using an app from the Playstore to fix SD issues. SeLinux Changer, and set it to permissive.
Remove your ext SD and boot up.
If the problems are solved then you need to format your SD card in Windows or Linux as Fat32 no matter what size your card is. DO NOT USE TWRP to format Ext SD.
Root​If SuperSU has issues updating it's binaries, you may need to flash This when you flash the ROM.
GSM Use​Some people are able to use this ROM on GSM. YMMV and I can't/don't support this. HERE
Cant wait
Sent from my LGLS990 using XDA Free mobile app
Downloading now! Thank you!
GREAT!!! WORKS PERFECTLY!! THANK YOU FOR YOUR HARD WORK!!!!:thumbup:
Sent from my LGLS990 using XDA Free mobile app
Testing
Will toy with this after work. Was running ZV8 perfectly until I flashed Xposed without a backup and kept getting Circle Case force closes and went back to ZV6. Hopefully I can make this my daily though. Can't wait for G3 toolbox to return for the L.
Sweeet! You blow my mind. Thank you.
This looks like my new home for a while.. cant wait to get into work so I can play!!
CyanJustice said:
Will toy with this after work. Was running ZV8 perfectly until I flashed Xposed without a backup and kept getting Circle Case force closes and went back to ZV6. Hopefully I can make this my daily though. Can't wait for G3 toolbox to return for the L.
Click to expand...
Click to collapse
You couldn't just re-flash zv8 on top of it to eliminate the changes xposed made to /system?
---------- Post added at 08:13 AM ---------- Previous post was at 07:56 AM ----------
This uses SuperSU by chainfire as default root app, correct?
RandomPooka said:
This uses SuperSU by chainfire as default root app, correct?
Click to expand...
Click to collapse
If that's directed at me, yes.
That's the one Team Codefire recommends with Bump. So I'll stay with it.
Thanks a lot for this Engine. Hopefully theming Zv8 will go easier than extracting/assembling it did. A quick question... I flash the zv8 partition zip right before Barepop, correct?
Thanks
:highfive:
RandomPooka said:
You couldn't just re-flash zv8 on top of it to eliminate the changes xposed made to /system?
---------- Post added at 08:13 AM ---------- Previous post was at 07:56 AM ----------
This uses SuperSU by chainfire as default root app, correct?
Click to expand...
Click to collapse
Ah crap, wouldn't that format data?
Since i already installed stock zv8 can i flash this over it?
Sent from my LGLS990 using XDA Free mobile app
Thanks!
Followed the simple instructions and flashed with no problems.
Updated all and going to let stock run over the weekend before I try Xposed or any other customizations.
CyanJustice said:
Ah crap, wouldn't that format data?
Click to expand...
Click to collapse
Typically, no. Not with AOSP and stock based KK ROMs. I don't know off the top of my head if @engine95 had put a data wipe in his install script to make the craziness that is L work properly.
Also, that SuperSU question was directed at you
Does this ROM have anything done to it to alleviate the 5.0.1 stock ROM issue of massive memory leaks that cause apps to close quite aggressively in the background? My brother has 5.0 on the Sprint S5 and his issue is actually worse than mine.
Thanks for this engine95 and the rest of team Stooge ?
Tried running ##Update# in the dialer when phone shut off it would not turn back on. I removed the battery for a min and tried again it still wouldnt turn back on. After 5 mins with battery pull phone finally turned back on. I dont know if this was just something weired with my phone or could been caused by the rom. Either way just thought i would bring it to your attention. Im currently up and running again with no problems. Thanks engine for bringing us Lollipop :victory:

BareBum-ZVB

Well here's the continuation of BarePapA. But now with ZVB!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents...
BareBum ​
See Post #2 for info's and extra stuff's
What is has:
This first version is the ROM, Kernel, and Modem
Rooted
busybox
init.d kernel support
Selinux permissive
SD card fix
increased mixer paths - louder sound
LG Backup to /data
Sprint VoiceMail to /data
Version 1 and on - Kernel and Rom only
Install:
Clean install!!!
In TWRP, select Advanced, Wipe, then /system, /cache, /dalvic, and /data. DO NOT select internal or ext SD!
Flash Rom
Update profile/prl. Then "Activate Device"
Go to "Settings, More, Mobile network, and select anything but "Global
If you have install issues --- See this post
Change logs :
Code:
[B]V2 - V1's removed apps, and...[/B]
[B]sys app[/B]
LG Weather
LG Weather service
LG Weather Theme
[B]priv app[/B]
MLT
LGIA
LGAction Manager
LGApplication Manager
LGConcierge
LGEasy Home
LGMyGuide
LGMyWellness
LGTasks
LGUpdateCenter
LGVoice Command
LGVoice CommandService
LIAInformant
LIAMrGDBlogger
LIA4URecomender
[B]V1[/B]
Init.d scripts
build.prop tweaks
Sprint boot ani and sounds removed
[B]Apps removed:
system apps:[/B]
Books
Chrome
Cloud print - moved to /data
Drive
Gmail
Google TTS
Hangouts
Google KB moved to /data
Maps
Google Music
Newsstand
Play Games
Google +
Steet
Swype
talkback
Videos
You tube
[B]priv apps[/B]
Data Optimizer
Box
File Manager
McAfee
ThinkFree
Lookout
Sprint installer
SprintID
Connections Optimizer
Sprint Zone
[B]Base version[/B]
Mainly stock, but with some sugar. NO APPS REMOVED
Rooted
busybox
init.d kernel support
Selinux permissive
SD card fix
increased mixer paths - louder sound
LG Backup to /data
Sprint VoiceMail to /data
Donators - THANK YOU - Never asked for, but very much appreciated!!!
 @Kemocybr
Downloads: Each Rom is it's own ROM. Not an Update
BareBum_V2 - Dirty flash from V1 SHOULD be fine. So wipe /system /dalvic and /cache. Any other ROM, clean flash.
BareBum_V1
BareBum_L_Odexed_Stock
XDA:DevDB Information
BareBum, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-09-28
Last Updated 2015-09-27
Files, info and stuffs
Files, info and stuffs​
These are already included in the ROM's. But in case anybody wants them for whatever.
SD_Card_Fix
Increased Mixer Paths
Stock_ZVB_init.d_Kernel
_____________________________________
All modems in this folder
_____________________________
Just in case
ZVB_RPM,TZ_partitions
ZV4/6 rpm,tz partitions
___________________________________
Host files
Blocking-host-files
Stock-host-files
________________________________
ALL ZVB stock Keyboards- flashable. ALL LG Keyboards
This will install all Stock LG KB's to /system/app. Remove before install any you don't want. Or after install. in a rooted explorer, /system/app and delete the appropriate folder.
_______________________
Dialer code info
Backup your EFS first!!! Just to be safe - In the FAQ
A dialer reset may be required for a lot of the issues. In order, easy to most invasive.....
##UPDATE#
or
##SCRTN#
or the biggie - which fixes bootani and Wifi calling
##RTN# - requires your MSL. You will need to either call Sprint. Or, follow THIS
Thanks! I was just in the process of pushing autoprime's ROM when I saw you created this one. I'll test it out now.
Is the ZVB modem in your folder the same as from autoprime's thread? Any reason to NOT flash it along with the new ROM?
SilverZero said:
Thanks! I was just in the process of pushing autoprime's ROM when I saw you created this one. I'll test it out now.
Is the ZVB modem in your folder the same as from autoprime's thread? Any reason to NOT flash it along with the new ROM?
Click to expand...
Click to collapse
Yes. It's already included.
But it does not have the RPM, TZ Partitiions that his does. You can see post#2 if you want those.
engine95 said:
Yes. It's already included.
But it does not have the RPM, TZ Partitiions that his does. You can see post#2 if you want those.
Click to expand...
Click to collapse
I never understood what those partitions were or why I'd need to worry. A while back I did a full wipe and nuked my whole phone, so I did a stock recovery using LG's tools and factory images to zv4, I believe, then went from there through BarePop and BarePapA. Coming from that I should be okay, right?
SilverZero said:
I never understood what those partitions were or why I'd need to worry. A while back I did a full wipe and nuked my whole phone, so I did a stock recovery using LG's tools and factory images to zv4, I believe, then went from there through BarePop and BarePapA. Coming from that I should be okay, right?
Click to expand...
Click to collapse
autoprime explains those partitions in his thread. But those of us on ZV4 bootloader seem to have issues with them.
It won't hurt anything to flash ZVB. And if there's issues, just flash back to the ZV4 ones.
ATM I'm still using ZV4 partitions.
Check out prime's thread fo some info on them.
You shouldn't have any issues. Just do a clean install As this is a whole new ROM
It's basically prime's rom with the fixes we like added. That's all. Bone stock with some sweetness.
V1 is in the works and it'll be starting on the cuts and tweaks. I thought I had it about ready, but it broke WIFI Calling so I need to start over. Gimme a few days.
So im using aosp rom and wanted to know if i can just flash the modem in recovery to update it?
churchey360 said:
So im using aosp rom and wanted to know if i can just flash the modem in recovery to update it?
Click to expand...
Click to collapse
Yup. Any of the lollipop modems should be fine.
engine95 said:
Yup. Any of the lollipop modems should be fine.
Click to expand...
Click to collapse
Since this wasn't a major android update will NavelA kernel work with ZVB? I was asking because i know on my s4 i could do that with some updates that didn't have any big changes lol or would it cause it to not boot properly?
Edit: i tried NavelA kernel with Autoprimes ZVB rooted ROM and it works fine
V1 is up in the OP See/read change log
engine95 said:
V1 is up in the OP See/read change log
Click to expand...
Click to collapse
Looks good, thanks for all the hard work. Is there going to be any more versions that will be more stripped down and minimal?
Sent from my LGLS990 using Tapatalk
The_Big_H said:
Looks good, thanks for all the hard work. Is there going to be any more versions that will be more stripped down and minimal?
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
At least one more. But not minimalist. Mostly weather, concierge and the LG tattletales.
But that'll all depend on what breaks doing it. I like to keep it all working if I can.
In post #2, I have added "Ad Blocking" and Stock host files. I absolutely hate ad's and the Blocking one blocks about everything, without needing an app. 2 problems though....
1. Some find them too restrictive and can't get to sites they normally would.
and
2. I seem to forget to remove it when I release a ROM. So these are here for... not if, but when I forget.
Is there a sprint changelog for zvb or something? searching about trying to figure out what is different in this update... appreciate all the time and work spent on us sprint folk. Thank You.
Deejayadhd said:
Is there a sprint changelog for zvb or something? searching about trying to figure out what is different in this update... appreciate all the time and work spent on us sprint folk. Thank You.
Click to expand...
Click to collapse
Go here for the link. http://forum.xda-developers.com/showthread.php?p=63038430
It's just the stagefright fix. But there's other little things that always get modified.
engine95 said:
Go here for the link. http://forum.xda-developers.com/showthread.php?p=63038430
It's just the stagefright fix. But there's other little things that always get modified.
Click to expand...
Click to collapse
Ayuh.. Thanks!
Sent from my LGLS990 using Tapatalk
engine95 said:
In post #2, I have added "Ad Blocking" and Stock host files. I absolutely hate ad's and the Blocking one blocks about everything, without needing an app. 2 problems though....
1. Some find them too restrictive and can't get to sites they normally would.
and
2. I seem to forget to remove it when I release a ROM. So these are here for... not if, but when I forget.
Click to expand...
Click to collapse
Just so I'm making sure i have it right, the blocking ones are in the rom by default? Just wondering because i just finished installing V1 and all my apps and I'm getting ads.
On that note, i just want to say thank you for yet again providing us with a smooth stable rom. For taking the time to make it and upload it for us. It is truly appreciated as i flashed the stock one this morning and OMG I forgot how much crap they put on these things.
Anyway, thank you for making my phone usable.
Macguyver said:
Just so I'm making sure i have it right, the blocking ones are in the rom by default? Just wondering because i just finished installing V1 and all my apps and I'm getting ads.
On that note, i just want to say thank you for yet again providing us with a smooth stable rom. For taking the time to make it and upload it for us. It is truly appreciated as i flashed the stock one this morning and OMG I forgot how much crap they put on these things.
Anyway, thank you for making my phone usable.
Click to expand...
Click to collapse
It's the regular ones. I'm almost done with V2, and yeah... I left them in there. But the regular ones are back in now.
Anyway, there's no issues flashing these back and forth. The host files that is.
Thanks. Glad to hear it. Yeah, I can't handle bone stock either. That's why I get these base roms out so fast.
@engine95
Going to diff ZVB kernel to see if they changed anything.
jcfunk said:
@engine95
Going to diff ZVB kernel to see if they changed anything.
Click to expand...
Click to collapse
Thanks. I briefly looked at source last night, and there's about 3mb more in size. So I would guess quite a bit has changed.
Also, because you called me out in it in the past, zipalign and sqlite3 aren't executable either. I tried a few different ones with no luck.

[ROM] [VS985] [47A] >> Azadi << [BUILD R2129]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Disclaimer:
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOU, YOUR COMPUTER OR YOUR PHONE BY YOU FLASHING THIS ROM. EVEN IF IT'S NOT YOUR'S, I'M STILL NOT RESPONSIBLE. I'M ALSO NOT RESPONSIBLE FOR FIXING ISSUES YOU MAY BE HAVING BECAUSE OF MODS, HACKS AND TWEAKS YOU'VE APPLIED YOURSELF.
So I decided to create my own rendition of what LG should have made Verizon release. So, here's the first and currently only 47A custom ROM...
Things I've moved from the stock 47A base:
All OTA Stuff
95% of all Verizon stuff
All Google Stuff, except Chrome
All Amazon Stuff
LG Contacts
LG Dialer
LG EasyHome
LG Email
LG Favorites Widget
LG Voice Mate
LG SMS
Some ringtones
and some random bloat​
I added the following:
The hotspot hack...
Googles Dialer (v2.3, not 1.01) has builtin VVM
Google Contacts
Outlook
Signal SMS
Motorola Alert
Some ringtones​
Features:
Systemless Root
BusyBox
Permission SELinux Boot
Boosted Volume Output
Systemwide DPI = 590
Deodexed​
Known Issues:
To come...​
Installation:
MAKE A BACKUP FIRST!
If you aren't already on the 35B bootstack, flash it.
I recommend TWRP 3.0 because it's what I used when recompiling everything.
Wipe data & cache...
Flash the full release and any updates WITH A HIGHER BUILD NUMBER.
Reboot and enjoy! (If you are asked to install SuperSU, DON'T!!!)
After flashing the full ROM, it will reboot one time before booting fully.
Keep an eye for updates. Keep your phone updated.
I am uploading updated full release builds every couple of days so if you need to reinstall for what ever reason, you won't have to download a ton of updates.
I've modified the original system.img instead of created extracted folder type of ROM for flashing like most people do. I find this MUCH safer for flashing.
Download
Credit for parts I used to make this go to
ViPER520. Check out his Viper4Android page for all your latest HiFi needs.
This Guy... roirraW "edor" ehT. For all of his efforts...
Microsoft for this email app that makes most stock email apps look like crap and feel like crap.
Open Whisper Systems for making the world more encrypted than it already was, and safer!
XDABBEB for this very God like gift to the grandfather account holders like myself of unlimited tethering...
And for all the other devs and blokes that bring us stuff that most people will take for granted. To you guys, THANKS!
Be honest... how many of you just read the credits in your head like the game show host talking about the prizes...
Questions & Answers...
Q: I don't see the VVM table in dialer?
A: This relies on your using Google Voice. Like the actual Google Voice app. You can have it co-installed with Hangouts and it won't effect anything. Verizon DOES NOT allow Google Voice to auto configure the settings. You'll have to do that manually. When it gets to the page that has 3 buttons, one will be skip, one is configure and the other is something else. Press skip. When you have completed that part and you are looking at Google Voice inbox screen. Go to the phones dialer. Type *71[Your Google Voice number] *90[Your Google Voice number] and *92[Your Google Voice number]. In 'call settings' of the phone's dialer, you'll see an option for voicemail carrier, make sure it's on "your carrier" not google voice.
Q: xCam doesn't work for me?!!
A: There's a new version on the Dev's page for Marshmallow. The other versions won't work.
Q: Google announced a newer version of their dialer and contacts app, why can't I update?
A: Once Google actually releases the next version, you can always download it from APKMirror and install it as if it was an updated app manually.
Q: Can I use Verizon's Visual Voicemail with this ROM?
A: Yes, download it from here and flash in TWRP.
Q: I don't seem to have root after flashing the full release and the updates... What can I do?
A: Flash this file...
Q: When I receive phone calls, no one can here me! What's going on?
A: The problem is you aren't running 35B bootstrap or if you are, your modem isn't 35B for some reason. Flash the 35B bootstrap.
Q: I am not running 35B bootstrap, where can I download it?
A: Click here...
Q: I can use "Ok, Google!" from any screen with this ROM?
A: Yes, download the patch from here and flash in TWRP.
Change Log
R2105 Release:
This is the release version recompiled with a major bug fixed and some other fixes.​R2106 Update:
Small SystemUI Tweaks​R2109 Update:
More SystemUI Tweaks
Removed LGCalendar
Added Google Calendar
Added HTC Keyboard​R2110 Update:
Fixed Volume Boost Levels​​R2114 Update:
Fixed HTC Keyboard FC's​​R2120 Release:
Based on 47A​​R2124 Release:
Minor fixes​​R2129 Release:
Minor fixes
Some system apps updated
Camera FPS Mod​​
Cool I will check it out and get back at u Thanks!
It's great to see devs still making roms for this phone. Thank you. Will check it out.
Thanks Roxana for sharing your Rom. Quick question since others may ask. Since you're using Google dialer then I'm assuming that advanced calling/video calling doesn't work through Verizon as well?
xposed supported?
toy028 said:
Thanks Roxana for sharing your Rom. Quick question since others may ask. Since you're using Google dialer then I'm assuming that advanced calling/video calling doesn't work through Verizon as well?
Click to expand...
Click to collapse
That is correct. I'll be releasing a patch file people can flash to restore the stock dialer so they can have that.
Edit: I was just looking at the thread for the stock 46a rom release, Advance Calling doesn't work on it's correctly and a few have said it's due to us not having a 46a Bootstrap. It's one of the reasons I prefer Google Voice.
justintevya said:
xposed supported?
Click to expand...
Click to collapse
Install of xposed is the same as for XDABBEBs 46a Rom release.
Why did you remove the stock sms/mms? So far rom seems fast and stable. In the stock google dialer when you make a call it looks like the lg dialer? Any ideas to make it look completely like google dialer.
rippedwarrior69 said:
Why did you remove the stock sms/mms? So far rom seems fast and stable. In the stock google dialer when you make a call it looks like the lg dialer? Any ideas to make it look completely like google dialer.
Click to expand...
Click to collapse
I removed the stock SMS/MMS app because it's hideous. Android 6, aka Marshmallow, has a very refinded UX. LG is just starting to work in that direction. They just haven't got there yet. I could have put Google Messager instead of Signal. Signal is VERY similar to GM as far as the UX goes but has way more features and security to it.
Thank you for your work! I'm up and running, only thing i had trouble with was chrome not working due to an error. I tried clearing cache and data without luck so I ended up unistalling via TB and reinstalling from play store without issues. Everything else is smooth and quick! Thanks!
Realm11984 said:
Thank you for your work! I'm up and running, only thing i had trouble with was chrome not working due to an error. I tried clearing cache and data without luck so I ended up unistalling via TB and reinstalling from play store without issues. Everything else is smooth and quick! Thanks!
Click to expand...
Click to collapse
Thanks for letting me know. I'll see what's up. What error was it that it gave? It is a beta. I'm going to be working on fixing any issues that everyone finds and getting the next release out soon. Also, if people can post their download speeds and what speed connection you have. I'm curious how Google is doing for hosting the file or if I need to find a faster place to store it.
For me I could not download direct to my phone, kept giving a fail message. To my PC it was okay. But AFH is always a good spot to upload things, my 2 cents.
clueless77 said:
For me I could not download direct to my phone, kept giving a fail message. To my PC it was okay. But AFH is always a good spot to upload things, my 2 cents.
Click to expand...
Click to collapse
Sadly, AFH cost money and there are plenty of free services out there. I'm going to be testing out some other cloud storages soon.
I have been running this amazing rom since last night and it runs like a champ thanks for this sweet rom I really like the way its set up and gives you that stock/asop feel , Good Job Dev
By the way the stripper zip in the other thread basically turns that rom into this rom right?
bigmarv31 said:
By the way the stripper zip in the other thread basically turns that rom into this rom right?
Click to expand...
Click to collapse
Mostly. I made that with no intent to release a full ROM. Now I'm releasing a full ROM. I'll be putting up an update tonight. I'm also going to be hosting it with Microsoft instead of my Google Drive... I found them to be A LOT FASTER.
RoxanaSchram said:
Mostly. I made that with no intent to release a full ROM. Now I'm releasing a full ROM. I'll be putting up an update tonight. I'm also going to be hosting it with Microsoft instead of my Google Drive... I found them to be A LOT FASTER.
Click to expand...
Click to collapse
Thats great I was the 1st to post and have been running your masterpiece and its awesome looking forward to the update Thanks
RoxanaSchram said:
Thanks for letting me know. I'll see what's up. What error was it that it gave? It is a beta. I'm going to be working on fixing any issues that everyone finds and getting the next release out soon. Also, if people can post their download speeds and what speed connection you have. I'm curious how Google is doing for hosting the file or if I need to find a faster place to store it.
Click to expand...
Click to collapse
I unfortunately can't remeber what the error was now and it's fixed so infant replicate. Sorry not much help. I did have trouble with the download as well. Took me about 5 or 6 times to get a complete download. Other than that it's been running great all day. Will the update be a dirty flash or clean wipe? I'm also giving the outlook Mail app a shot, I like it so far. Thanks again!
Realm11984 said:
I unfortunately can't remeber what the error was now and it's fixed so infant replicate. Sorry not much help. I did have trouble with the download as well. Took me about 5 or 6 times to get a complete download. Other than that it's been running great all day. Will the update be a dirty flash or clean wipe? I'm also giving the outlook Mail app a shot, I like it so far. Thanks again!
Click to expand...
Click to collapse
I'm glad you are enjoying everything and that it's all running smoother. I've tried to produce an error with Chrome on first boot but I'm not able to. Might have been you're phone was already updating Google Services or something like that.
I'm already uploading the new update to Microsoft. It's going to be the full ROM just so I have a full copy on there. After this, it should be all incremental updates. This one and all that follow can be dirty flashed unless it's posted otherwise, which I hope never to have to do. Of course if you are having issues after flashing an update, wiping cache is always a good idea since I'm also working on framework stuff for future releases.

Categories

Resources