i9100 dead after write flash . need help - Android Q&A, Help & Troubleshooting

hello '
i need help flash file ( i 9300 MTK 6575 )
Info
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
EMMC_ID:0x45010053454D30344700000000000000
EMMC_PRODUCT_NAME: SAMSUNG :0x53454D303447
EMMC_BOOT1_SIZE: 0x00100000
EMMC_BOOT2_SIZE: 0x00100000
EMMC_PRMB_SIZE: 0x00020000
EMMC_GP1_SIZE: 0x00000000
EMMC_GP2_SIZE: 0x00000000
EMMC_GP3_SIZE: 0x00000000
EMMC_GP4_SIZE: 0x00000000
EMMC_USER_SIZE:EC000000
Analysis of USB port...
Clearing pinouts settings...
>>Clearing pinouts settings complete!
0x540E8000 --Format length:0x1226000
pleas help me:angel:​

Related

N9006 MTK 6572 rom need have bricked device

I flashed a wrong rom, and now have phone N9006 mtk 6572 bricked, it gives this error now , dont turn on and connection takes few second,,
it gives this error now
Flash files count is :12
Action : Firmware update.
Selected Samsung Clone: Note 3 Clone(MT6572)
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM21)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: S_FT_ENABLE_DRAM_FAIL
Error connect phone, aborting.
All done.
I didnt make backup my fault, before that I read the info of phone which was stuck at logo, the info read via volcano box is this, can some one give a backup or any rom to at least revive this phone,
Version: V3.8
SN:xxxxxxxxxxx
Port:COM57
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM3 COM8 COM9 COM57
Current Port:COM57
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
Boot downloading complete!
EMMC_ID:0x45010053454D3034472805A6827A513B
EMMC_PRODUCT_NAME: SAMSUNG :0x53454D303447
EMMC_BOOT1_SIZE: 0x00200000
EMMC_BOOT2_SIZE: 0x00200000
EMMC_PRMB_SIZE: 0x00200000
EMMC_GP1_SIZE: 0x00000000
EMMC_GP2_SIZE: 0x00000000
EMMC_GP3_SIZE: 0x00000000
EMMC_GP4_SIZE: 0x00000000
EMMC_USER_SIZE: 0x0EC000000(3.69 G)
Analysis of system files...
PRELOADER: addr:0x000000 --length:0x880000
MBR: addr:0x880000 --length:0x080000
EBR1: addr:0x900000 --length:0x080000
PRO_INFO: addr:0x980000 --length:0x300000
NVRAM: addr:0xC80000 --length:0x500000
PROTECT_F: addr:0x1180000 --length:0xA00000
PROTECT_S: addr:0x1B80000 --length:0xA00000
SECCFG: addr:0x2580000 --length:0x020000
UBOOT: addr:0x25A0000 --length:0x060000
BOOTIMG: addr:0x2600000 --length:0x600000
RECOVERY: addr:0x2C00000 --length:0x600000
SEC_RO: addr:0x3200000 --length:0x040000
MISC: addr:0x3240000 --length:0x080000
LOGO: addr:0x32C0000 --length:0x300000
EXPDB: addr:0x35C0000 --length:0xA00000
ANDROID: addr:0x3FC0000 --length:0x28A00000
CACHE: addr:0x2C9C0000 --length:0x17800000
USRDATA: addr:0x441C0000 --length:0x52C00000
FAT: addr:0x96DC0000 --length:0x54340000
BMTPOOL: addr:0xFFFF00A8 --length:0x000000
Format addr:0x481C0000 --Format length:0x4EC00000
>>Read phone information success.
these are the info , so please can some one help me urgently thankyou.
bcnboy

Need S7582 mt6572 nand flash file

Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
Boot downloading complete!
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
Boot downloading complete!
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
SecCfgVal :0x00000000
BromVersion :0xFF
BLVersion :0x01
Boot downloading complete!
FlashID:002C00BC00900055
Flash Type: NAND_MT29C4G48MAZAPAKD
FlashLen:20000000
PRELOADER: addr:0x000000 --length:0x080000
PRO_INFO: addr:0x080000 --length:0x100000
NVRAM: addr:0x180000 --length:0x180000
PROTECT_F: addr:0x300000 --length:0x180000
PROTECT_S: addr:0x480000 --length:0x180000
SECCFG: addr:0x600000 --length:0x020000
UBOOT: addr:0x620000 --length:0x060000
BOOTIMG: addr:0x680000 --length:0x600000
RECOVERY: addr:0xC80000 --length:0x600000
SEC_RO: addr:0x1280000 --length:0x040000
MISC: addr:0x12C0000 --length:0x060000
LOGO: addr:0x1320000 --length:0x100000
EXPDB: addr:0x1420000 --length:0x200000
FAT: addr:0x1620000 --length:0x1E00000
ANDROID: addr:0x3420000 --length:0x14000000
CACHE: addr:0x17420000 --length:0x700000
USRDATA: addr:0x17B20000 --length:0x7AA0000
BMTPOOL: addr:0xFFFF0050 --length:0x000000
Format addr:0x17B20000 --Format length:0x70A0000

Unable to back up NVRAM using FlashToolLinux

I'm having some trouble backing up the NVRAM partition on my new gemini. I downloaded the latest SP Tool build and modified the udev rules according to the wiki, however when I hit 'Read Back' in the tool and restart my gemini its boot hangs and I get the following output from SPFT:
Code:
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 2000
device pid = 2000
com portName is: /dev/ttyACM0
Total wait time = -1554179156.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Failed to Connect DA: STATUS_PROTOCOL_ERR
Disconnect!
BROM Exception! ( ERROR : STATUS_PROTOCOL_ERR (-1073676283) , MSP ERROE CODE : 0x00.
[HINT]:
)((ConnectDA,../SP-Flash-Tool-src/Conn/Connection.cpp,131))
I haven't found this error code in any of the SPFT docs I've found; can anyone help?
Thanks!
dopaminejunky said:
I'm having some trouble backing up the NVRAM partition on my new gemini. I downloaded the latest SP Tool build and modified the udev rules according to the wiki, however when I hit 'Read Back' in the tool and restart my gemini its boot hangs and I get the following output from SPFT:
Code:
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 2000
device pid = 2000
com portName is: /dev/ttyACM0
Total wait time = -1554179156.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Failed to Connect DA: STATUS_PROTOCOL_ERR
Disconnect!
BROM Exception! ( ERROR : STATUS_PROTOCOL_ERR (-1073676283) , MSP ERROE CODE : 0x00.
[HINT]:
)((ConnectDA,../SP-Flash-Tool-src/Conn/Connection.cpp,131))
I haven't found this error code in any of the SPFT docs I've found; can anyone help?
Thanks!
Click to expand...
Click to collapse
Hey, I get similar errors when trying to perform any action related to the preloader in Linux, Just described the issue here: https://www.oesf.org/forum/index.php?showtopic=35999
Also looking for a solution, and will follow this tread.

Vivo 1901 SP Flash Tools ERROR : STATUS_SHUTDOWN_CMD_EXCEPTION (-1073414142)

Hello guys,
I am trying to bring back to life a dead Vivo 1901 (V15) phone using SP Flash Tools v5.2036. The Firmware I am using comes in a file named, "Vivo_Y15_PD1901BF_MT6765_EX_A_1.12.4_11062019_(by_vivofirmware.com)",
which also provides MT6765 scatter file.
The auth file, scatter file and DA file that I am using for flashing is attached with this post. Upon selecting these files and flashing ( first tried with download only, then using format all + download, but results are same), I the following messages appear in the output of the tool.
Code:
$ sudo sh flash_tool.sh
[sudo] password for sarkar4540:
sysname:Linux
nodename:sarkar4540-X556UQK
release:5.4.0-49-generic
version:#53~18.04.1-Ubuntu SMP Mon Sep 21 14:12:39 UTC 2020
machine:x86_64
domainame:(none)
cur_kernel_version = 5.4.0
QObject::moveToThread: Cannot move objects with a parent
support_dl_cert_to_storage: 0
Application asked to unregister timer 0xc00001b which is not registered in this thread. Fix application.
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
add@/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/module/cdc_acm
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1601887002.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Failed to Connect DA: STATUS_SHUTDOWN_CMD_EXCEPTION(-1073414142)
Disconnect!
BROM Exception! ( ERROR : STATUS_SHUTDOWN_CMD_EXCEPTION (-1073414142) , MSP ERROE CODE : 0x00.
[HINT]:
)((ConnectDA,../../../flashtool/Conn/Connection.cpp,149))
Following are the outputs of various commands in the system I am using.
Code:
$ uname -a
Linux sarkar4540-X556UQK 5.4.0-49-generic #53~18.04.1-Ubuntu SMP Mon Sep 21 14:12:39 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Code:
$ dmesg
.
.
.
[ 324.046688] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[ 324.195603] usb 1-2: New USB device found, idVendor=0e8d, idProduct=0003, bcdDevice= 1.00
[ 324.195605] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 324.248243] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 324.249509] usbcore: registered new interface driver cdc_acm
[ 324.249510] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 324.275093] usbcore: registered new interface driver usbserial_generic
[ 324.275106] usbserial: USB Serial support registered for generic
[ 324.300238] usbcore: registered new interface driver option
[ 324.300261] usbserial: USB Serial support registered for GSM modem (1-port)
I request you guys to please show me where to head. I shall always be grateful to you if you can help me out of this misery.
Regards,
A. Sarkar

Question couldn't host Android Automotive OS 11 in Raspberry Pi 4 Model B

Hi, I downloaded the img file from the provided link(https://images.snappautomotive.com/rpi/snapp_automotive_rpi4_32gb_20211119.img.zip), but after successfully flashing the image file to an SD card, the raspberry pi4 model b didn't boot up. It shows (attached are the images of shown error) :
Raspberry Pi 4 Model B - 8GB bootloader: 6efe41bd 2022/01/25
board: 003115 6485fcf2 e4:5f:01:ad:58:05 boot: mode SD 1 order f41 retry 0/1 restart 18/-1
SD: card detected 00035344534431323885fa236632a165 part: mbr [0x0c:00000800 0x83:00040800 0x83:00440800 0x83:00480800]
fw: start4.elf fixup4.dat
net: down ip: 0.0.0.0 sn: 0.0.0.0 gw: 0.0.0.0
tftp: 0.0.0.0 00:00:00:00:00:00
Trying partition: 6
type: 16 lba: 2048 oem: 'mkfs. fat' volume:
rsc 4 fat-sectors 256 c-count 65399 c-size 4
root dir cluster 1 sectors 32 entries 512 Read config.txt bytes 206 hnd 0x00000000
Read start4.elf bytes 2214880 hnd 0x00000000 Read fixup4.dat bytes 5433 hnd 0x00000000
Firmware: 4b4aff21f72c5b9ba39d83c7b0f8fa910a6ef99b Dec 15 2020 14:48:29
0x00d03115 0x00000000 0x0000003f
start4.elf: is not compatible This board requires newer software
Get the latest software from https://www.raspberrypi.com/software/
Help me solve the issue. What should I follow?
just add the polestar and volvo images for emulator in android auto

Categories

Resources