Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
Boot downloading complete!
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
Boot downloading complete!
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
SecCfgVal :0x00000000
BromVersion :0xFF
BLVersion :0x01
Boot downloading complete!
FlashID:002C00BC00900055
Flash Type: NAND_MT29C4G48MAZAPAKD
FlashLen:20000000
PRELOADER: addr:0x000000 --length:0x080000
PRO_INFO: addr:0x080000 --length:0x100000
NVRAM: addr:0x180000 --length:0x180000
PROTECT_F: addr:0x300000 --length:0x180000
PROTECT_S: addr:0x480000 --length:0x180000
SECCFG: addr:0x600000 --length:0x020000
UBOOT: addr:0x620000 --length:0x060000
BOOTIMG: addr:0x680000 --length:0x600000
RECOVERY: addr:0xC80000 --length:0x600000
SEC_RO: addr:0x1280000 --length:0x040000
MISC: addr:0x12C0000 --length:0x060000
LOGO: addr:0x1320000 --length:0x100000
EXPDB: addr:0x1420000 --length:0x200000
FAT: addr:0x1620000 --length:0x1E00000
ANDROID: addr:0x3420000 --length:0x14000000
CACHE: addr:0x17420000 --length:0x700000
USRDATA: addr:0x17B20000 --length:0x7AA0000
BMTPOOL: addr:0xFFFF0050 --length:0x000000
Format addr:0x17B20000 --Format length:0x70A0000
Related
Tldr: Heimdall cannot detect my galaxy SII on mountain lion when plugged in and set to download mode. I don't have access to a windows PC but i've also tried virtual box running windows 7 with Heimdall and Odin.
Phone: Samsung Galaxy SII (i9100)
Computer: Retina macbook pro (mountain lion)
Software: Heimdall Suite 1.3.2 (Binaries)
Problem: I did a bad firmware update and now i can't boot my phone (not even into recovery mode). I can however, boot into download mode.
My thinking is that i can re-flash clockworkmod recovery using heimdall and then flash a version of cyanogen mod once i can enter recovery mode.
I've installed the Heimdall version above and re-started my macbook. I then open a terminal and try and flash:
Code:
$ heimdall flash --kernel zImage
Heimdall v1.3.2, Copyright (c) 2010-2012, Benjamin Dobell, Glass Echidna
xxxxx
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
xxxxx
Initialising connection...
Detecting device...
Failed to detect compatible download-mode device.
I've also tried with Sudo and get the same message telling me the device cannot be detected.
The device is plugged in and is visible to OSX (trimmed):
Code:
$ system_profiler SPUSBDataType
USB:
USB 3.0 SuperSpeed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBXHCI
PCI Device ID: 0x1e31
PCI Revision ID: 0x0004
PCI Vendor ID: 0x8086
Bus Number: 0x14
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x7fcb00001e2d
PCI Revision ID: 0x7fcb00000004
PCI Vendor ID: 0x7fcb00008086
Bus Number: 0x1a
Hub:
Product ID: 0x0024
Vendor ID: 0x8087 (Intel Corporation)
Version: 0.00
Speed: Up to 480 Mb/sec
Location ID: 0x1a100000 / 2
Current Available (mA): 500
Current Required (mA): 0
Gadget Serial:
Product ID: 0x685d
Vendor ID: 0x04e8 (Samsung Electronics Co., Ltd.)
Version: 2.1b
Speed: Up to 480 Mb/sec
Location ID: 0x1a120000 / 4
Current Available (mA): 500
Current Required (mA): Unknown (Device has not been configured)
My real question is: Has anyone successfully got heimdall to detect their SII under Mountain Lion? If so, what software versions and processes did you use?
hello '
i need help flash file ( i 9300 MTK 6575 )
Info
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
EMMC_ID:0x45010053454D30344700000000000000
EMMC_PRODUCT_NAME: SAMSUNG :0x53454D303447
EMMC_BOOT1_SIZE: 0x00100000
EMMC_BOOT2_SIZE: 0x00100000
EMMC_PRMB_SIZE: 0x00020000
EMMC_GP1_SIZE: 0x00000000
EMMC_GP2_SIZE: 0x00000000
EMMC_GP3_SIZE: 0x00000000
EMMC_GP4_SIZE: 0x00000000
EMMC_USER_SIZE:EC000000
Analysis of USB port...
Clearing pinouts settings...
>>Clearing pinouts settings complete!
0x540E8000 --Format length:0x1226000
pleas help me:angel:
I flashed a wrong rom, and now have phone N9006 mtk 6572 bricked, it gives this error now , dont turn on and connection takes few second,,
it gives this error now
Flash files count is :12
Action : Firmware update.
Selected Samsung Clone: Note 3 Clone(MT6572)
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM21)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: S_FT_ENABLE_DRAM_FAIL
Error connect phone, aborting.
All done.
I didnt make backup my fault, before that I read the info of phone which was stuck at logo, the info read via volcano box is this, can some one give a backup or any rom to at least revive this phone,
Version: V3.8
SN:xxxxxxxxxxx
Port:COM57
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM3 COM8 COM9 COM57
Current Port:COM57
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
Boot downloading complete!
EMMC_ID:0x45010053454D3034472805A6827A513B
EMMC_PRODUCT_NAME: SAMSUNG :0x53454D303447
EMMC_BOOT1_SIZE: 0x00200000
EMMC_BOOT2_SIZE: 0x00200000
EMMC_PRMB_SIZE: 0x00200000
EMMC_GP1_SIZE: 0x00000000
EMMC_GP2_SIZE: 0x00000000
EMMC_GP3_SIZE: 0x00000000
EMMC_GP4_SIZE: 0x00000000
EMMC_USER_SIZE: 0x0EC000000(3.69 G)
Analysis of system files...
PRELOADER: addr:0x000000 --length:0x880000
MBR: addr:0x880000 --length:0x080000
EBR1: addr:0x900000 --length:0x080000
PRO_INFO: addr:0x980000 --length:0x300000
NVRAM: addr:0xC80000 --length:0x500000
PROTECT_F: addr:0x1180000 --length:0xA00000
PROTECT_S: addr:0x1B80000 --length:0xA00000
SECCFG: addr:0x2580000 --length:0x020000
UBOOT: addr:0x25A0000 --length:0x060000
BOOTIMG: addr:0x2600000 --length:0x600000
RECOVERY: addr:0x2C00000 --length:0x600000
SEC_RO: addr:0x3200000 --length:0x040000
MISC: addr:0x3240000 --length:0x080000
LOGO: addr:0x32C0000 --length:0x300000
EXPDB: addr:0x35C0000 --length:0xA00000
ANDROID: addr:0x3FC0000 --length:0x28A00000
CACHE: addr:0x2C9C0000 --length:0x17800000
USRDATA: addr:0x441C0000 --length:0x52C00000
FAT: addr:0x96DC0000 --length:0x54340000
BMTPOOL: addr:0xFFFF00A8 --length:0x000000
Format addr:0x481C0000 --Format length:0x4EC00000
>>Read phone information success.
these are the info , so please can some one help me urgently thankyou.
bcnboy
I am trying to resurrect my old Samsung Galaxy i5500. A couple of years ago I tried installing some custom rom but failed and bricked the phone. The boot process halts at the Samsung logo (the very first logo to appear.)
Putting the phone into recovery mode (using the volume down button + center button + power button) works, at least i presume that it works - the logo with the android shoveling dirt and the word "Downloading..." beneath it appears - but neither adb nor fastboot can see the device.
My troubleshooting so far:
Code:
[email protected]:~# dmesg
...
[823736.755555] usb 2-1.1: new high-speed USB device number 6 using ehci-pci
[823736.851772] usb 2-1.1: unable to get BOS descriptor
[823736.857819] usb 2-1.1: New USB device found, idVendor=04e8, idProduct=6601
[823736.857829] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[823736.857835] usb 2-1.1: Product: MSM7x27
[823736.857839] usb 2-1.1: Manufacturer: Sasmsung
[823739.903177] cdc_acm 2-1.1:2.0: ttyACM0: USB ACM device
[823739.903553] usbcore: registered new interface driver cdc_acm
[823739.903557] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[823761.102222] cdc_acm 2-1.1:2.0: failed to set dtr/rts
[email protected]:~# lsusb
...
Bus 002 Device 011: ID 04e8:6601 Samsung Electronics Co., Ltd Mobile Phone
...
[email protected]:~# adb devices
List of devices attached
[email protected]:~# fastboot devices
[email protected]:~#
I am running Lubuntu 12.04 on my laptop.
What do I need to do to be able to connect to the phone using adb and fastboot?
Thanks!
The "recovery mode" that you mentioned, is actually download mode and it's used to flash packages with Odin.
Use it to flash a custom recovery and then use that to flash a custom ROM. Format /system and /data as ext4 before flashing the ROM.
Sent from my LG G2 Mini using XDA Labs
Hello guys,
I am trying to bring back to life a dead Vivo 1901 (V15) phone using SP Flash Tools v5.2036. The Firmware I am using comes in a file named, "Vivo_Y15_PD1901BF_MT6765_EX_A_1.12.4_11062019_(by_vivofirmware.com)",
which also provides MT6765 scatter file.
The auth file, scatter file and DA file that I am using for flashing is attached with this post. Upon selecting these files and flashing ( first tried with download only, then using format all + download, but results are same), I the following messages appear in the output of the tool.
Code:
$ sudo sh flash_tool.sh
[sudo] password for sarkar4540:
sysname:Linux
nodename:sarkar4540-X556UQK
release:5.4.0-49-generic
version:#53~18.04.1-Ubuntu SMP Mon Sep 21 14:12:39 UTC 2020
machine:x86_64
domainame:(none)
cur_kernel_version = 5.4.0
QObject::moveToThread: Cannot move objects with a parent
support_dl_cert_to_storage: 0
Application asked to unregister timer 0xc00001b which is not registered in this thread. Fix application.
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
add@/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2
[email protected]/module/cdc_acm
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1601887002.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Failed to Connect DA: STATUS_SHUTDOWN_CMD_EXCEPTION(-1073414142)
Disconnect!
BROM Exception! ( ERROR : STATUS_SHUTDOWN_CMD_EXCEPTION (-1073414142) , MSP ERROE CODE : 0x00.
[HINT]:
)((ConnectDA,../../../flashtool/Conn/Connection.cpp,149))
Following are the outputs of various commands in the system I am using.
Code:
$ uname -a
Linux sarkar4540-X556UQK 5.4.0-49-generic #53~18.04.1-Ubuntu SMP Mon Sep 21 14:12:39 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Code:
$ dmesg
.
.
.
[ 324.046688] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[ 324.195603] usb 1-2: New USB device found, idVendor=0e8d, idProduct=0003, bcdDevice= 1.00
[ 324.195605] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 324.248243] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 324.249509] usbcore: registered new interface driver cdc_acm
[ 324.249510] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 324.275093] usbcore: registered new interface driver usbserial_generic
[ 324.275106] usbserial: USB Serial support registered for generic
[ 324.300238] usbcore: registered new interface driver option
[ 324.300261] usbserial: USB Serial support registered for GSM modem (1-port)
I request you guys to please show me where to head. I shall always be grateful to you if you can help me out of this misery.
Regards,
A. Sarkar