[Q] [GT-P1010] stuck on booting and Odin problem - Android Q&A, Help & Troubleshooting

Hi,
I'm really a noob, I was searching a few hours for a solution but I didn't find that. So...
I got my GT-P1010 from my friend, there was 2.3.6 with some addons like jelly bean keyboard, animations from this software, and some my friends apps, so I decided to make a factory reset to delete those addons (I thought that tab with it is getting slooow), I had read about factory reset from CWM menu (my tab has that) so I made it. After that I made a reboot and my tab stucks in animation with triangles.
I had read that I must put my device into a download mode and install new rom with Odin. but in every tutorial there is a yellow box in odin after plug in device, my colour is light blue. Kies can't connect too (connecting.... with no end)
I want to have original clean firmware 2.3.6 on my device, I dont need "hacking" apps like that, no non-official addons etc after all.
in summary I have CMW recovery menu (if it's required) and I can use that, windows 8 is on my laptop.
Please help me, i need that tab as soon as possible.
greetings!
P.S. i cant find firmware for my tab, every link is on hotfile and dead.

Related

[Q] Ace and Odin

Hi There,
I have a friends Galaxy Ace that had Android 2.3.5 on it.
Rooted the phone OK and then wanted to upgrade to a rom that also had 2.3.7 on it.
Downloaded the free version of Clockwork Mod and installed.
When holding down the power and home buttons, on boot, it never loads to the CW screen but the standard android download screen.
So when I used that to install the rom I downloaded and GApps, it rebooted and now I am stuck at a screen that simply says ANDROID.
So it's stuck and I can do nothing. I have heard about Odin and it's ability to get the phone back to a stock FW like 2.3.5 or 2.3.6 but I can not find anywhere to download the firmware files and a half decent guide to Odin.
Is there anyone that could help me get what I am after and help me use ODIN to get the phone working again. Wouldn't be too bothered if it was mine but being a friends phone I am starting to panic a little
Thanks in advance to anyone wiling to help
Darnun said:
Hi There,
I have a friends Galaxy Ace that had Android 2.3.5 on it.
Rooted the phone OK and then wanted to upgrade to a rom that also had 2.3.7 on it.
Downloaded the free version of Clockwork Mod and installed.
When holding down the power and home buttons, on boot, it never loads to the CW screen but the standard android download screen.
So when I used that to install the rom I downloaded and GApps, it rebooted and now I am stuck at a screen that simply says ANDROID.
So it's stuck and I can do nothing. I have heard about Odin and it's ability to get the phone back to a stock FW like 2.3.5 or 2.3.6 but I can not find anywhere to download the firmware files and a half decent guide to Odin.
Is there anyone that could help me get what I am after and help me use ODIN to get the phone working again. Wouldn't be too bothered if it was mine but being a friends phone I am starting to panic a little
Thanks in advance to anyone wiling to help
Click to expand...
Click to collapse
Before everything there is no paid clockworkmode recovery
second did u did a full wipe after flashing rom? that may solve your problem
third if so ... go here and choose the firware that suits u best samfirmware.com
4th here is a full tutorial http://www.youtube.com/watch?v=mMVkduK606A
ATTENTION the tutorial uses a GT-5830M For Your Case Is a GT-S5830 ! Also Another Note Phone Has To Be In Download Mode So Odin Recognize it (Volume Up + Center Button + Power Button )
Ask to Google
Sent from my GT-S5830 using Tapatalk 2

[q] gti8262 > phone doesn't start

Hi XDA members, I came here because I'm tired and I cant'd do anything more, I need help
Ok so first I had a Samsung Galaxy Core Duos GTI8262, original, no modified, android 4.1.2, everything all right.
Then I starded to try to install a costum ROM with 4.4. I rooted it, and then I found a CMW Recovery and I had installed it via Odin307, but it didn't work because it was not compatible with my phone, it was crashing all the time and the phone used to make noises, like an engine working or something, and then it shuts down. Then after much search I found here in XDA a costum Recovery Based in CMW for my phone, "CMW based Recovery v6.0.4.7".
I installed it via Odin307 under the previous CMW that dint work properly, and finally everething went all right, I installed a ROM with KitCat, then another with Lillicop, etc... then I wanted to try Cynogen, it was in my model devolopment and I installed it, bigger mistake, it didn't recognize SIM card such as Wifi, Bluethoth, etc... no conections. I get tired because with all my Download mode started to get stuck, so, I could not install another ROM, so, angry, I went to based CMW Recovery and I formatted EVERYTHING, until get to the point where there wasn't ANY file in SDCARD0, I tried to make factory Reset, didn't work, so I turn the phone On and the logo "Galaxy Core Duos GTI8262" stays there forever... the phone doesn't start.
THEEN... i downloaded the stock ROM here in XDA to my model (I'm Portuguese (Portugal)), and tried to install it via Odin207. I was waiting that the Download Mode got stucked again but I tried it in the same way, because I didn't knew what to do more. BUT, instead of get stuck, the Download Mode only stays for aprox. 5 seconds, then the phone shuts down... SO > nothing in SDCARD0 (and the CWM Based doesn't have the option to install anything in extSDCard I dont know why...) and Download Mode crashes... without pay nothing, WHAT CAN I DO PEOPLE? :crying:
Please help, sorry my English...
Duarte T.

[q] [help] gti8262 > phone doesn't start

Hi XDA members, I came here because I'm tired and I cant'd do anything more, I need help
Ok so first I had a Samsung Galaxy Core Duos GTI8262, original, no modified, android 4.1.2, everything all right.
Then I starded to try to install a costum ROM with 4.4. I rooted it, and then I found a CMW Recovery and I had installed it via Odin307, but it didn't work because it was not compatible with my phone, it was crashing all the time and the phone used to make noises, like an engine working or something, and then it shuts down. Then after much search I found here in XDA a costum Recovery Based in CMW for my phone, "CMW based Recovery v6.0.4.7".
I installed it via Odin307 under the previous CMW that dint work properly, and finally everething went all right, I installed a ROM with KitCat, then another with Lillicop, etc... then I wanted to try Cynogen, it was in my model devolopment and I installed it, bigger mistake, it didn't recognize SIM card such as Wifi, Bluethoth, etc... no conections. I get tired because with all my Download mode started to get stuck, so, I could not install another ROM, so, angry, I went to based CMW Recovery and I formatted EVERYTHING, until get to the point where there wasn't ANY file in SDCARD0, I tried to make factory Reset, didn't work, so I turn the phone On and the logo "Galaxy Core Duos GTI8262" stays there forever... the phone doesn't start.
THEEN... i downloaded the stock ROM here in XDA to my model (I'm Portuguese (Portugal)), and tried to install it via Odin207. I was waiting that the Download Mode got stucked again but I tried it in the same way, because I didn't knew what to do more. BUT, instead of get stuck, the Download Mode only stays for aprox. 5 seconds, then the phone shuts down... SO > nothing in SDCARD0 (and the CWM Based doesn't have the option to install anything in extSDCard I dont know why...) and Download Mode crashes... without pay nothing, WHAT CAN I DO PEOPLE?
Please help, sorry my English...
Duarte T.

[Q] samsung s2 i 19o0 not booting after root and reset.

My problem: samsung galaxy s2 gt i1900, rooted for the first time yesterday by someone not so experienced (me). After rooting, it worked well until I did a factory reset from phone menu. After that, it got stucked on boot, samsung logo with the yellow triangle. It only works now in download mode - I cannot acces the reset/recovery menu - it restarts over and over. Odin recognizes the phone.
I have read many threads here , but I didn`t find a real step by step solution. Could be my fault. Anyway, I need your kind help before making another wrong move.
From what I understood so far, I could download the original firmware from : www.sammobile.com, then Download mode - Odin - PDA - load the original firmware - start. If this is right, I have a few questions:
1. In odin what options must be un / checked?
2. After this step (if I`m right so far) can I still root the phone after fixing the problem? If so, please recommend me a safe firmware. Or if it`s possible to load directly a custom rom (not the original one but a safe, working one), please tell me (link).
If I`m wrong so far please teach me how to fix this frustrating issue.
Please excuse my english and thank you.
ania_90 said:
My problem: samsung galaxy s2 gt i1900, rooted for the first time yesterday by someone not so experienced (me). After rooting, it worked well until I did a factory reset from phone menu. After that, it got stucked on boot, samsung logo with the yellow triangle. It only works now in download mode - I cannot acces the reset/recovery menu - it restarts over and over. Odin recognizes the phone.
I have read many threads here , but I didn`t find a real step by step solution. Could be my fault. Anyway, I need your kind help before making another wrong move.
From what I understood so far, I could download the original firmware from : www.sammobile.com, then Download mode - Odin - PDA - load the original firmware - start. If this is right, I have a few questions:
1. In odin what options must be un / checked?
2. After this step (if I`m right so far) can I still root the phone after fixing the problem? If so, please recommend me a safe firmware. Or if it`s possible to load directly a custom rom (not the original one but a safe, working one), please tell me (link).
If I`m wrong so far please teach me how to fix this frustrating issue.
Please excuse my english and thank you.
Click to expand...
Click to collapse
Hi,
Follow this guide as it is to make your phone in working condition.
http://www.ibtimes.co.uk/samsung-galaxys2-i9100-unroot-official-jellybean-firmware-460777
After this step, you can root your phone anytime, and even try custom ROMs on your i9100.
Regards.

[Q] Galaxy S2 GT-I9100 hard bricked

Hi guys, I`m new to this forum and I wouldn`t be posting this topic if I found a solution on other forums. If anyone had a problem like mine, or saw a thread before, I would appreciate if you pasted a link to the solution, or gave some kind of advice.
First of all, I`m new to rooting, custom roms, etc., so I guess that whatever I did, it was my fault. I got this Galaxy S2 (GT-I9100) as a gift, and since i already had a phone, I wanted to take a risk and take a shot at installing a lollipop rom. I watched a few tutorials, it seemed simple enough, so i thought why the hell not, but in the process something went wrong...
Sooo... here is what I`ve done:
1.) Rooted my phone with VROOT
2.) Flashed custom recovery with ODIN. I`m not sure which version of CWM it was, 6.0.4.5 I think (the file is named CWM KitKar compatible-I9100). When I flashed CWM, my phone didn`t boot up. All I got was a Samsung Galaxy logo and a yellow triangle for a few seconds before my screen went black again, but I could still access both recovery mode and download mode using the combination of keys.
3.) And then I did what I think screwed up my phone. I thought maybe flashing a lollipop rom through recovery would solve the issue (maybe the recovery is incopatible with my older stock rom and it`s the reason why my phone isn`t booting). So i flashed CM12 from galaxys2root.com. It`s called CM12.1S ROM for Galaxy S2 GT-I9100 (Andorid 5.1)
Not only it didn`t solve my problem, I still can`t get my phone to boot (now I get a samsung logo and a yellow triangle, but screen doesn`t go black after a few seconds, I left it in this state till the battery ran out and still nothing). And on the top of all things, I can`t get my phone to recovery mode anymore, all I get is the yellow triangle. I can still get it into download mode, but it doesn`t connect with my PC anymore. It charges, but I can`t connect it with ODIN anymore. And the weirdest thing is, when I connect it to PC, my other USB port goes crazy and disconnect my USB Wi-Fi adapter
What went wrong? Any advice is highly anticipated. :good:

Categories

Resources