My problem: samsung galaxy s2 gt i1900, rooted for the first time yesterday by someone not so experienced (me). After rooting, it worked well until I did a factory reset from phone menu. After that, it got stucked on boot, samsung logo with the yellow triangle. It only works now in download mode - I cannot acces the reset/recovery menu - it restarts over and over. Odin recognizes the phone.
I have read many threads here , but I didn`t find a real step by step solution. Could be my fault. Anyway, I need your kind help before making another wrong move.
From what I understood so far, I could download the original firmware from : www.sammobile.com, then Download mode - Odin - PDA - load the original firmware - start. If this is right, I have a few questions:
1. In odin what options must be un / checked?
2. After this step (if I`m right so far) can I still root the phone after fixing the problem? If so, please recommend me a safe firmware. Or if it`s possible to load directly a custom rom (not the original one but a safe, working one), please tell me (link).
If I`m wrong so far please teach me how to fix this frustrating issue.
Please excuse my english and thank you.
ania_90 said:
My problem: samsung galaxy s2 gt i1900, rooted for the first time yesterday by someone not so experienced (me). After rooting, it worked well until I did a factory reset from phone menu. After that, it got stucked on boot, samsung logo with the yellow triangle. It only works now in download mode - I cannot acces the reset/recovery menu - it restarts over and over. Odin recognizes the phone.
I have read many threads here , but I didn`t find a real step by step solution. Could be my fault. Anyway, I need your kind help before making another wrong move.
From what I understood so far, I could download the original firmware from : www.sammobile.com, then Download mode - Odin - PDA - load the original firmware - start. If this is right, I have a few questions:
1. In odin what options must be un / checked?
2. After this step (if I`m right so far) can I still root the phone after fixing the problem? If so, please recommend me a safe firmware. Or if it`s possible to load directly a custom rom (not the original one but a safe, working one), please tell me (link).
If I`m wrong so far please teach me how to fix this frustrating issue.
Please excuse my english and thank you.
Click to expand...
Click to collapse
Hi,
Follow this guide as it is to make your phone in working condition.
http://www.ibtimes.co.uk/samsung-galaxys2-i9100-unroot-official-jellybean-firmware-460777
After this step, you can root your phone anytime, and even try custom ROMs on your i9100.
Regards.
Related
Hi everyone
i live in north africa in algeria
i tried to flash my i9100G nwith the latest stock ics
everytjing went well unitil a big red fail apeared on odin
my phone doesn t turn on i got a pc with phone they told this is the sead screen
whatever please help me to slove this problem
& thanks for every one
I flashed ics xxlpq
no problem just flash the stock rom again but this time with pit
Hello,
please see this excellent repair guide:
http://forum.xda-developers.com/showthread.php?t=1448765
and let us know if it works for you.
can you give me a link for a stock rom with the pit file & thanks alot
nouninou said:
can you give me a link for a stock rom with the pit file & thanks alot
Click to expand...
Click to collapse
Did you even read the tutorial??, there clearly states where to download the files,
thats why you bricked your phone, you have to readdd everything and understand things before going up
I hope this options works for you !!
Hey, read this options to solve this problem. The second option Worked for me
1. if you´re phone doesn´t turn on and the screen not response maybe the problem is a hardbrick,
2.if you´re galaxy doesnt turn on but in the screen appears icons, the trouble is softbrick.
1.The solution for a hardbrick is a JTAG, this is a used method by Tecnics
2. The solution for a softbrick is a reinstall , just put the galaxy in download mode and install a official firmware with odin and done
after downloading a pit file it works
thank you very much
I tried to root my S3 (i9300) that I just bought from a friend with a custom ROM and it got bricked. After following most of the guides from similar threds, I was able to make the boot screen appear but now it won't get past that!!!
it shows an error at the top left conner in green color reading as follow: jump kernel
can anyone kindly advise me or guide me to how I can make the phone work again?
If it had a custom rom then it was already rooted. Follow the guide in general forum to flash back to stock rom via odin on your pc. If you can access download mode (from off hold volume down, home then power button until the Samsung logo appears) then thus should work.
Make sure you read and fully understand what you are doing otherwise you'll end up with a full brick.
Ombagi said:
I tried to root my S3 (i9300) that I just bought from a friend with a custom ROM and it got bricked. After following most of the guides from similar threds, I was able to make the boot screen appear but now it won't get past that!!!
it shows an error at the top left conner in green color reading as follow: jump kernel
can anyone kindly advise me or guide me to how I can make the phone work again?
Click to expand...
Click to collapse
One what phone model is it and what custom rom .
Two can you access download mode if so what does it say as regards Product .
jje
Also post link to the root file you flashed
Hi,
I'm really a noob, I was searching a few hours for a solution but I didn't find that. So...
I got my GT-P1010 from my friend, there was 2.3.6 with some addons like jelly bean keyboard, animations from this software, and some my friends apps, so I decided to make a factory reset to delete those addons (I thought that tab with it is getting slooow), I had read about factory reset from CWM menu (my tab has that) so I made it. After that I made a reboot and my tab stucks in animation with triangles.
I had read that I must put my device into a download mode and install new rom with Odin. but in every tutorial there is a yellow box in odin after plug in device, my colour is light blue. Kies can't connect too (connecting.... with no end)
I want to have original clean firmware 2.3.6 on my device, I dont need "hacking" apps like that, no non-official addons etc after all.
in summary I have CMW recovery menu (if it's required) and I can use that, windows 8 is on my laptop.
Please help me, i need that tab as soon as possible.
greetings!
P.S. i cant find firmware for my tab, every link is on hotfile and dead.
Hi guys, I`m new to this forum and I wouldn`t be posting this topic if I found a solution on other forums. If anyone had a problem like mine, or saw a thread before, I would appreciate if you pasted a link to the solution, or gave some kind of advice.
First of all, I`m new to rooting, custom roms, etc., so I guess that whatever I did, it was my fault. I got this Galaxy S2 (GT-I9100) as a gift, and since i already had a phone, I wanted to take a risk and take a shot at installing a lollipop rom. I watched a few tutorials, it seemed simple enough, so i thought why the hell not, but in the process something went wrong...
Sooo... here is what I`ve done:
1.) Rooted my phone with VROOT
2.) Flashed custom recovery with ODIN. I`m not sure which version of CWM it was, 6.0.4.5 I think (the file is named CWM KitKar compatible-I9100). When I flashed CWM, my phone didn`t boot up. All I got was a Samsung Galaxy logo and a yellow triangle for a few seconds before my screen went black again, but I could still access both recovery mode and download mode using the combination of keys.
3.) And then I did what I think screwed up my phone. I thought maybe flashing a lollipop rom through recovery would solve the issue (maybe the recovery is incopatible with my older stock rom and it`s the reason why my phone isn`t booting). So i flashed CM12 from galaxys2root.com. It`s called CM12.1S ROM for Galaxy S2 GT-I9100 (Andorid 5.1)
Not only it didn`t solve my problem, I still can`t get my phone to boot (now I get a samsung logo and a yellow triangle, but screen doesn`t go black after a few seconds, I left it in this state till the battery ran out and still nothing). And on the top of all things, I can`t get my phone to recovery mode anymore, all I get is the yellow triangle. I can still get it into download mode, but it doesn`t connect with my PC anymore. It charges, but I can`t connect it with ODIN anymore. And the weirdest thing is, when I connect it to PC, my other USB port goes crazy and disconnect my USB Wi-Fi adapter
What went wrong? Any advice is highly anticipated. :good:
Hey,
I have a Galaxy SII GT-i9100T that i think someone try to install a rom and failed,
When i turn the phone on i got this error:
Firmwave upgrade encountered an issue. Please select recovery mode in Kies & try again.
now i want to install the orignal rom,
I cant enter recovery mode only download mode,
I download a rom stock from samsung-updates.com,
and i tried to install it with odin and it's stuck here:
http://i.imgur.com/mRmipNS.png
How i can fix it ?
thank you
(Sorry for my bad english)
Troubleshoot a failed odin flash by hopper8
http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Follow every step as many times as it takes to get a successful flash.
The only thing that's going to fix your phone is perseverance.....
Edit....Some of the info in that thread is specific to the international variant, but most of the info is 'generic' enough that it will apply to any variant......
http://i.imgur.com/rVnFwJM.jpg