Hello. As there's no Lumia 925 forum yet, and the 925 has almost the same specs, I'm posting my question here.
Has anybody been able to flash a Lumia 925? I've read four different tutorials for Lumia flashing, none of them agreeing in the sequence of buttons pressing; and with each of the tutorials, and after trying no less than twenty times, I always ended up with some error message, "wrong signal from the device", or something like that. And it gives me back the "retry" popup window, or simply exits with error code. The only log I get from the flashing software (Nokia Care Suit) is "recovery failed". I'm using Product Support Tool version 2013.49.3.30, one of the latest, supposedly supporting Lumia 925.
Someone else? Some success flashing this phone? Some hint about what the issue might be?
zogoibi said:
Hello. As there's no Lumia 925 forum yet, and the 925 has almost the same specs, I'm posting my question here.
Has anybody been able to flash a Lumia 925? I've read four different tutorials for Lumia flashing, none of them agreeing in the sequence of buttons pressing; and with each of the tutorials, and after trying no less than twenty times, I always ended up with some error message, "wrong signal from the device", or something like that. And it gives me back the "retry" popup window, or simply exits with error code. The only log I get from the flashing software (Nokia Care Suit) is "recovery failed". I'm using Product Support Tool version 2013.49.3.30, one of the latest, supposedly supporting Lumia 925.
Someone else? Some success flashing this phone? Some hint about what the issue might be?
Click to expand...
Click to collapse
Aren`t the Nokia Care Suite or Nokia Software Updater compatible with the 925?
Yes, both are. That's why I was wondering. Anyhow, I already passed that stage with a clean installation of the software in my system. Now I'm stuck in another problem...
zogoibi said:
Hello. As there's no Lumia 925 forum yet, and the 925 has almost the same specs, I'm posting my question here.
Has anybody been able to flash a Lumia 925? I've read four different tutorials for Lumia flashing, none of them agreeing in the sequence of buttons pressing; and with each of the tutorials, and after trying no less than twenty times, I always ended up with some error message, "wrong signal from the device", or something like that. And it gives me back the "retry" popup window, or simply exits with error code. The only log I get from the flashing software (Nokia Care Suit) is "recovery failed". I'm using Product Support Tool version 2013.49.3.30, one of the latest, supposedly supporting Lumia 925.
Someone else? Some success flashing this phone? Some hint about what the issue might be?
Click to expand...
Click to collapse
You have, already, two thread open for the same problem...
Problem flashing Lumia 925
[Q] How to flash latest firmware?
Nope. Those two threads address different problems. I first posted one about where to find latest software. Later on, I posted another one addressing a very particular issue regarding the flashig process. By the way, I reckon you might be able to help with the latter.
Related
Nokia Care Suite shows the 920 as a unsupported device.
You can download the firmware form RM-821 from Navifirm.
It also shows up on NCS but when I try to download it I get an error. None of the variants will download.
So, at the moment I am happily downloading the firmware variant for Telstra from Navifirm.
Once I get finish, does anyone know how to flash it?
I have a Rogers Lumia 920, which I stechnically RM-820, but neither Navifirm nor NCS have anything for RM-820.
Thanks for any help you can offer!
Want to know too
Hi,
I have the same question, I want to get it from Rogers but I want to flash it to a "vanilla" version from Nokia.
What I'm not sure is the Navifirm will have it, since its a none Symbian device.. Not sure "Phoenix tools for Nokia devices" will work either...
I would love to know that one too
Thank you.
CRAP!
Well, I can confirm that downloading a RM-821 to the Lumia 920 from Rogers (RM-820) will NOT work!
I tried, it looked like it was starting, asked me to confirm that I wanted to flash the ROM even though it was for a different product code. I said yes, it started., then BAMN. Got an error saying it was the wrong product. Now my 920 will not boot. It just stays at NOKIA. I have tried a soft and hard reset, many times, nothing. I think I am screwed until a RM-820 variation ROM is released. :crying:
Forgot to mention
There was an update for Nokia Care Suite which I downloaded and installed and it now detects the 920.
tomcahill said:
There was an update for Nokia Care Suite which I downloaded and installed and it now detects the 920.
Click to expand...
Click to collapse
What was the version and where abouts?
tomcahill said:
Well, I can confirm that downloading a RM-821 to the Lumia 920 from Rogers (RM-820) will NOT work!
I tried, it looked like it was starting, asked me to confirm that I wanted to flash the ROM even though it was for a different product code. I said yes, it started., then BAMN. Got an error saying it was the wrong product. Now my 920 will not boot. It just stays at NOKIA. I have tried a soft and hard reset, many times, nothing. I think I am screwed until a RM-820 variation ROM is released. :crying:
Click to expand...
Click to collapse
Hope you won't have to wait for too long for that RM-821 firmware to be available for download.
But I'm glad to hear that there is a version of Nokia Care Tools that can be used to flash the 920 and especially that it seems to allow flashing of firmware for a different product code no problem. I was assuming that we would have to do some renaming of files like it was necessary to flash firmware for a different product code to the Lumia 800.
I think this means that I should be able to flash my RM-821 CV Germany Lumia 920 that I'll receive in the next view days to some non-EU CV Rm-821 firmware no problem?
I think once I receive my Lumia I'll try to flash it to the CV Switzerland and hope that this will remove that stupid EU imposed volume cap that I'm pretty sure the Germany CV will have.
Regards,
karlmueller
The new version of Product Support Tool for Store 5.0 that recognizes the 920 is 2012.44.5.3
However, there are no RM-820 roms right now.
Is it possible to extract/backup the rom from a working device?
tomcahill said:
There was an update for Nokia Care Suite which I downloaded and installed and it now detects the 920.
Click to expand...
Click to collapse
I only found an old version of Nokia care, where did you find it?
Thank you.
wexjunk said:
I only found an old version of Nokia care, where did you find it?
Thank you.
Click to expand...
Click to collapse
I guess he probably downloaded the latest version from here http://www.seidea.com/category/nokia-care-suite/ and then used the Programs built-in auto-update feature to update it to the latest one.
Why take the risk and flash since the device is unlocked and you can get the US marketplace in a simple workaround?
xsever said:
Why take the risk and flash since the device is unlocked and you can get the US marketplace in a simple workaround?
Click to expand...
Click to collapse
Its not the locked thing, its the splash logo of ATT or Rogers that will drive me crazy.... its more the branding than the lock thing.
Although, I prefer it will be unlocked and unbranded, it might take a while till we see it around, I can't wait that long
tomcahill said:
The new version of Product Support Tool for Store 5.0 that recognizes the 920 is 2012.44.5.3
However, there are no RM-820 roms right now.
Is it possible to extract/backup the rom from a working device?
Click to expand...
Click to collapse
Which variant of the ROM did you flash? Switzerland, Sweden, etc...?
Is there a way to change some files to modify the product code of your device before flashing?
xsever said:
Why take the risk and flash since the device is unlocked and you can get the US marketplace in a simple workaround?
Click to expand...
Click to collapse
Are you referencing to me? If so as I said I want to flash my Lumia to a non-EU firmware to get rid of that stupid EU imposed volume capping.
xsever said:
Why take the risk and flash since the device is unlocked and you can get the US marketplace in a simple workaround?
Click to expand...
Click to collapse
Because it's not the US marketplace I am interested in. It's getting tethering to work.
Of course in hindsight, I should have waited until there were RM-820 ROMs available :|
Thankfully I still have my Lumia 900 with MMS and tethering working.
hkalltheway said:
Which variant of the ROM did you flash? Switzerland, Sweden, etc...?
Is there a way to change some files to modify the product code of your device before flashing?
Click to expand...
Click to collapse
Australia. Not sure, however it's too late for me to change file names on the phone.
I tried changing the .vpl file to say RM-820 instead of 821 but then I got an error about the signature being invalid
I am hopeful that when AT&T releases their phones on Friday then RM-820 ROMs will be available.
Hi!
I would like to know if a EU ROM flash Will be enough to make the hardware available to reach the LTE 800 and 2600 frequencies instead of a US ROM That reach 700 and 2100. In France, the LTE (4G) is for the 800 and 2600. If i buy the 920 in us I won't be able to receive 4G due to this differences....
Thx
Hi,
goes to someone download a firmware from NaviFirm Plus 1.7?
I can not download the file "DC_template_development_v4.bin"
Will flashing unlock the phone?
Hello,
I just bought an ATT 920..and currently with FIDO, Canada.
From what i have been reading so far...seems there is no way to unlock this phone..i tried all kinds of forums, sites, and ..nothing so far.
I know...i shoudlnt have bought..but i was so impatient to get this phone
Question..will flashing the phone help me unlocking it and be able to use it with FIDO canada?
Any help..suggesting would be useful..
thanks,
Eugen
Hi all, below was posted on another forum if this helps. The chap successfully flashed his 920 with different firmware. It didn't unlock his phone but he did not try renaming the sim lock file to the same as his current which I think somebody needs to do.
Download & install Nokia Care suite
Download DC_template_development_v4.bin and place in the "C:\ProgramData\Nokia\Packages\Products\rm-821" directory (or wherever your care suite set itself up for)
Install "WinUSB Drivers<architecture>.msi" from "C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers" (assumes x64 PC)
Run Nokia Care suite then run Product Support Tools
Connect the phone and let it be detected
Boot the phone into testing mode
Open device manager & find all the unidentified devices (check by unplugging and re-conecting the phone) there were about 8 for me.
Right click on each one and update the driver manually, show all hardware and select "Nokia phone"
From Tools, Firmware Downloads search for "059R075" and download files
When downloaded open "RM821_059R075_1232.2110.1244.3_035.vpl" from the packages folder
Edit line 12 (<ProductCode>059R075</ProductCode>) with the code for the EE firmware (059R1W4) so the line reads: "<ProductCode>059R1W4</ProductCode>"
Turn the phone off and then on while holding the up arrow. You should get to the Nokia boot-loading screen (Nokia logo with a cog)
Then choose "programming, Recovery" from the product support tool
Choose the downloaded image & click Start.
If you get a warning about being unable to connect to the phone do what it says and unplug the phone & power it off (hold both volume buttons and power for 5 seconds) then plug it back in.
Keep your fingers crossed for 5 minutes...
Click to expand...
Click to collapse
If you need the DC_template_development_v4.bin you can download that here
What is the Rogers Lumia 920 (RM-820) Product Code
jms.flynn said:
Hi all, below was posted on another forum if this helps. The chap successfully flashed his 920 with different firmware. It didn't unlock his phone but he did not try renaming the sim lock file to the same as his current which I think somebody needs to do.
If you need the DC_template_development_v4.bin you can download that here
Click to expand...
Click to collapse
I wonder what the Rogers Lumia 920 Product Code is ?? Perhaps if I had that I could just edit the vpl of a RM-821 ROM and get it to work.
Can anyone tell me what the product code is?
Greetings,
I got a first production line Lumia 920 (PRTP) loaded with ATT stuff. I want to know if I can flash it with another Firmware (it comes with a rm820 and want to switch to rm821). I have tried done with both RMs trying to move to the most recent OS version. But it does not allow me to do it as it gives me errors with both of them. What's next on the list to try?
I have a Rogers 920 and I got impatient for the update and tried to flash it last night. I followed the instructions posted on tons of threads around here, and it didn't work. Now I have a phone that is stuck at the Nokia screen....
I am only trying to flash the Rogers 920 with a Rogers 920 ROM, but it is complaining about a Platform ID mismatch? 0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image does not match with platform ID of the device.
I redownloaded the firmware 3 times. Also, the program cannot read my Platform ID. Any ideas why that might be or if that is contributing to the issue? Any easy way to find my Platform ID without being able to boot the phone? In the Lumia 800, there was a sticker under the SIM card that said it, but no luck with the 920.
wm.andrew.wilson said:
I have a Rogers 920 and I got impatient for the update and tried to flash it last night. I followed the instructions posted on tons of threads around here, and it didn't work. Now I have a phone that is stuck at the Nokia screen....
I am only trying to flash the Rogers 920 with a Rogers 920 ROM, but it is complaining about a Platform ID mismatch? 0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image does not match with platform ID of the device.
I redownloaded the firmware 3 times. Also, the program cannot read my Platform ID. Any ideas why that might be or if that is contributing to the issue? Any easy way to find my Platform ID without being able to boot the phone? In the Lumia 800, there was a sticker under the SIM card that said it, but no luck with the 920.
Click to expand...
Click to collapse
Just to follow up, there are reports on here and WPCentral of the Rogers updated ROM being broken (doesn't recognize the phone correctly). I am downgrading to the old ROM and will try to do the OTA update. Will post back if it works just so others can see.
Confirmed. The new Rogers ROM is broken. Flashed the .1002 ROM successfully and will wait for OTA update.
wm.andrew.wilson said:
I have a Rogers 920 and I got impatient for the update and tried to flash it last night. I followed the instructions posted on tons of threads around here, and it didn't work. Now I have a phone that is stuck at the Nokia screen....
I am only trying to flash the Rogers 920 with a Rogers 920 ROM, but it is complaining about a Platform ID mismatch? 0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image does not match with platform ID of the device.
I redownloaded the firmware 3 times. Also, the program cannot read my Platform ID. Any ideas why that might be or if that is contributing to the issue? Any easy way to find my Platform ID without being able to boot the phone? In the Lumia 800, there was a sticker under the SIM card that said it, but no luck with the 920.
Click to expand...
Click to collapse
download it from care suite. it worked like that for me.
Hi guys I have been following XDA Developers for years and I love it I have found many useful tips and tricks in my time from hear over at the Android forums and now I would like to share my first post with you all not only as a thank you but also even though the nokia WP 7.8 upgrade is close I was impatient like many of you and wanted it now I read lots of threads about using navifirm+ etc and renaming files but in all honesty I think my method is easier and quicker and cuts out a lot of confusion hope somebody finds this as useful as I did.
All you will need for this Update is Nokia Care Suite.
PLEASE NOTE THIS METHOD IS FOR UPDATING YOUR ORIGINAL PHONE AND CARRIER
For Example..
Before Update your phoneis running on Vodafone WP7.5, - After Update it will be Vodafone WP7.8 (carrier locked)
Before you start get your phone code pop your sim tray out and check the code by the Barcode/QR label it should be seven digits mine is 059N8H6
Write yours down and then put the sim and tray back in the phone.
Right lets get started
We need to find a decent version of Nokia Care SuiteThis I found a little hard as a lot of the downloads are full of bloatware/spyware however this is the one I used. softpedia.com/get/Mobile-Phone-Tools/Nokia/Nokia-Care-Suite.shtml ( as a new user I cannot post the Link)
You may need to update some windows components mainly Microsoft net framework 4.0 and all that is available including the extender. you may even need to update c++ redistrubutle to be able to install Nokia care suite. however Nokia Care Suite will tell you what you need.
Download and install Nokia care Suite this will take a little while and after it is installed you then install all Drivers in C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers some will not be compatible that is normal.(my system is win7 64bit)
After all drivers have been installed you can then Open Nokia care center . you may have to go to your program files and open the Nokia Folder C:\Program Files (x86)\Nokia\Nokia Care Suite\Application Launcher\bin application launcher then right click and run as administrator.( I had Too)
once it has loaded you will have a menu double click “Product Support Tool For Store 5.0” you will see a picture of a disconnected phone and cable Click File and “open Product”
Find or type into the filter RM-801 . YOU SHOULD THEN HAVE 1 RESULT this is Our Nokia Lumia 800's click open and you will now see it on the screen (left) with the disconnected cable and phone. connect your phone so that the phone drivers get installed (after install you can leave it connected)
check that in the bottom corner their is a Globe lit up saying online it should be. then click Programming at the bottom left of the window and select Recovery. a new field will appear on screen saying Properties and you will see three boxes. Code, Variant Name and Version.
Click into the Code box and type your 7 digit code from the sim card tray you wrote down and click find online.a Box will open and lots of firmwares should appear within the popped up box in the Code section again type your code and that will give you your specific update to WP7.8
Click download and wait until it has finished after it has downloaded then click update list it should appear in the properties boxes. (if not just select tools from drop down menu and click Downloads and then double click the file)
Then Just highlight the Firmware file and click Start The software will then take over and instruct you to turn off the phone( if it is still connected) after you have done this then connect the phone to the USB cable whilst holding volume up button the phone will vibrate a couple of times and the drivers may instal again give it a few seconds and . press retry Thats it Nokia Care Suite is doing your Upgrade.
Sit Back and relax as Your Lumia 800 upgrades to WP 7.8 I am pretty sure this method will work with any Lumia device however I have only done it with MY Lumia 800 and therefore cannot guarantee it.
obviously I cannot be held responsible for any bricking or damage you cause to the your phone so only proceed if you are comfortable doing so.
Hope you all find this useful cheers oobritoo.
pls delete
mj084 said:
pls delete
Click to expand...
Click to collapse
Could I ask why you want me to delete this thread?
Why delete, post very useful
oobritoo said:
Hi guys I have been following XDA Developers for years and I love it I have found many useful tips and tricks in my time from hear over at the Android forums and now I would like to share my first post with you all not only as a thank you but also even though the nokia WP 7.8 upgrade is close I was impatient like many of you and wanted it now I read lots of threads about using navifirm+ etc and renaming files but in all honesty I think my method is easier and quicker and cuts out a lot of confusion hope somebody finds this as useful as I did.
All you will need for this Update is Nokia Care Suite.
Before you start get your phone code pop your sim tray out and check the code by the Barcode/QR label it should be seven digits mine is 059N8H6
Write yours down and then put the sim and tray back in the phone.
Right lets get started
We need to find a decent version of Nokia Care SuiteThis I found a little hard as a lot of the downloads are full of bloatware/spyware however this is the one I used. softpedia.com/get/Mobile-Phone-Tools/Nokia/Nokia-Care-Suite.shtml ( as a new user I cannot post the Link)
You may need to update some windows components mainly Microsoft net framework 4.0 and all that is available including the extender. you may even need to update c++ redistrubutle to be able to install Nokia care suite. however Nokia Care Suite will tell you what you need.
Download and install Nokia care Suite this will take a little while and after it is installed you then install all Drivers in C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers some will not be compatible that is normal.(my system is win7 64bit)
After all drivers have been installed you can then Open Nokia care center . you may have to go to your program files and open the Nokia Folder C:\Program Files (x86)\Nokia\Nokia Care Suite\Application Launcher\bin application launcher then right click and run as administrator.( I had Too)
once it has loaded you will have a menu double click “Product Support Tool For Store 5.0” you will see a picture of a disconnected phone and cable Click File and “open Product”
Find or type into the filter RM-801 . YOU SHOULD THEN HAVE 1 RESULT this is Our Nokia Lumia 800's click open and you will now see it on the screen (left) with the disconnected cable and phone. connect your phone so that the phone drivers get installed (after install you can leave it connected)
check that in the bottom corner their is a Globe lit up saying online it should be. then click Programming at the bottom left of the window and select Recovery. a new field will appear on screen saying Properties and you will see three boxes. Code, Variant Name and Version.
Click into the Code box and type your 7 digit code from the sim card tray you wrote down and click find online.a Box will open and lots of firmwares should appear within the popped up box in the Code section again type your code and that will give you your specific update to WP7.8
Click download and wait until it has finished after it has downloaded then click update list it should appear in the properties boxes. (if not just select tools from drop down menu and click Downloads and then double click the file)
Then Just highlight the Firmware file and click Start The software will then take over and instruct you to turn off the phone( if it is still connected) after you have done this then connect the phone to the USB cable whilst holding volume up button the phone will vibrate a couple of times and the drivers may instal again give it a few seconds and . press retry Thats it Nokia Care Suite is doing your Upgrade.
Sit Back and relax as Your Lumia 800 upgrades to WP 7.8 I am pretty sure this method will work with any Lumia device however I have only done it with MY Lumia 800 and therefore cannot guarantee it.
obviously I cannot be held responsible for any bricking or damage you cause to the your phone so only proceed if you are comfortable doing so.
Hope you all find this useful cheers oobritoo.
Click to expand...
Click to collapse
Your solution is good but has a big issue, and I will try to explain it to you.
Imagine that you are like me, having a Lumia 800 that you bought to Orange (or any other provider). Mine was an Orange France Lumia 800 that I had desimlocked officialy by them, and after this, I installed, via Navifirm, an unbranded ROM for the phone. When using your solution, as you said in your post, you must provide inside the Nokia Product Support Tool the code of your device, closely linked to your simcard (you said by yourslef that this code is located on the Simcard compartment. The Nokia Product Support Tool will then download and install on your mobile a ROM branded to the operator corresponding to the code provided.
Navifirm allows you to pick almost any rom, independantely to your code number, and by using a little trick (renaiming 3 files), to install it.
This is the biggest default of this method for someone who cares about not being branded again. If you are using a branded phone and want a firmware customized by your operator, then your solution is for sure the best one.
But anyway thank you for your post, it will help many of us I am sure.
Hi
My brother uses 0 which has Windows 7 installed in it as operating system. From the system itself, it has a built-in Bing search, not just for texts/phrases, images, videos, but for songs as well. Whenever a song is playing, the search option automatically picks up which song is being played & shows option to buy it from Windows Store.
I myself have Samsung Galaxy S 4G (1st generation) with Android as built-in operating system. Though I love Android for its variety, I just can't figure out how to do such song search with Android phones. Google is pre-installed in these phones. But Google's voice search doesn't help with identifying the song. Is there another way to do this?
Thanks!
ybregeon said:
Your solution is good but has a big issue, and I will try to explain it to you.
Imagine that you are like me, having a Lumia 800 that you bought to Orange (or any other provider). Mine was an Orange France Lumia 800 that I had desimlocked officialy by them, and after this, I installed, via Navifirm, an unbranded ROM for the phone. When using your solution, as you said in your post, you must provide inside the Nokia Product Support Tool the code of your device, closely linked to your simcard (you said by yourslef that this code is located on the Simcard compartment. The Nokia Product Support Tool will then download and install on your mobile a ROM branded to the operator corresponding to the code provided.
Navifirm allows you to pick almost any rom, independantely to your code number, and by using a little trick (renaiming 3 files), to install it.
This is the biggest default of this method for someone who cares about not being branded again. If you are using a branded phone and want a firmware customized by your operator, then your solution is for sure the best one.
But anyway thank you for your post, it will help many of us I am sure.
Click to expand...
Click to collapse
Thank You for your explanation I think maybe I should headline the fact this is only for original carrier firmware Updates
EvaBrian said:
Hi
My brother uses 0 which has Windows 7 installed in it as operating system. From the system itself, it has a built-in Bing search, not just for texts/phrases, images, videos, but for songs as well. Whenever a song is playing, the search option automatically picks up which song is being played & shows option to buy it from Windows Store.
I myself have Samsung Galaxy S 4G (1st generation) with Android as built-in operating system. Though I love Android for its variety, I just can't figure out how to do such song search with Android phones. Google is pre-installed in these phones. But Google's voice search doesn't help with identifying the song. Is there another way to do this?
Thanks!
Click to expand...
Click to collapse
Simply install from Google Play Store the application Shazam or Soundhound, and you're done!
---------- Post added at 03:14 PM ---------- Previous post was at 03:13 PM ----------
oobritoo said:
Thank You for your explanation I think maybe I should headline the fact this is only for original carrier firmware Updates
Click to expand...
Click to collapse
My pleasure. I thank you for posting this anyway, it's usefull
Thanks
Hello, i was wondering if this is also valid for Mexican Phones, i bought my lumia 800 phone in mexico and dont know if i can do this update, im really looking forward to the update =(.
-------------
edit
i was able to update, thx =D
Excellent
rafa8595 said:
Hello, i was wondering if this is also valid for Mexican Phones, i bought my lumia 800 phone in mexico and dont know if i can do this update, im really looking forward to the update =(.
-------------
edit
i was able to update, thx =D
Click to expand...
Click to collapse
Glad it helped welcome to 7.8
This worked great up until it showed me a really old WP7.5 rom as being the latest for my phone
Looks like I have RM-819_NAM_US_CV_VAR191243_MAGENTA_V1 whatever that means.
On my nokia lumia 610 instaled windows 7.8 with Nokia Care Suite.
Probleme is: app Bluetooth Share and Ringtone Maker is not preinstaled in new firmware. On markeplace not find. I find winth qr code on net, open link to app but message: this app is not disponible for my region...etc.. I change region on my windows live id from Romania to English (UK) but same mesage.
Please give me a way to have bluetooth share. Exist win 7.8 with this app preinstal?
yanqemil said:
On my nokia lumia 610 instaled windows 7.8 with Nokia Care Suite.
Probleme is: app Bluetooth Share and Ringtone Maker is not preinstaled in new firmware. On markeplace not find. I find winth qr code on net, open link to app but message: this app is not disponible for my region...etc.. I change region on my windows live id from Romania to English (UK) but same mesage.
Please give me a way to have bluetooth share. Exist win 7.8 with this app preinstal?
Click to expand...
Click to collapse
hi I only supplied the method to update the firmware I checked my Lumia*00 I do not have theses apps either and In my Marketplace they are listed as not being compatible with my phone Please remember although this is WP 7.8 it may not be the final release!!
Does this keep your phone data or will it all be done?
alexball said:
Does this keep your phone data or will it all be done?
Click to expand...
Click to collapse
hi the whole phone will be wiped so you will need to back-up important files.
Solution to have Bluetooth Share (preinstaled) in phone lumia 610 is to install firmware country variant Germany...and set region to Germany in phone. Tested.
How come my care suite does not find my lumia 800? but when i tryed whit my N9 it worked like charm?
Drivers problem
Ssave said:
How come my care suite does not find my lumia 800? but when i tryed whit my N9 it worked like charm?
Click to expand...
Click to collapse
Easy, you need to install the Nokia USB Drivers, located in the folder Drivers, found inside the installation forlder of Nokia Care Suite. Then your Lumia 800 will be recognized.
oobritoo said:
Before you start get your phone code pop your sim tray out and check the code by the Barcode/QR label it should be seven digits mine is 059N8H6
Write yours down and then put the sim and tray back in the phone.
Click to expand...
Click to collapse
Does anyone know or have access to how these codes work?
I bought my 800 unlocked from a 3UK store and don't want it locking to that network as I use a different carrier. I would have thought there were generic codes for non-carrier versions....
Thanks,
I have an issue, my phone is unbranded sim free Lumia 710 with code 059n2l6 there is no software found for this product code, Can I use any?
slugger09 said:
I have an issue, my phone is unbranded sim free Lumia 710 with code 059n2l6 there is no software found for this product code, Can I use any?
Click to expand...
Click to collapse
yes
Hi everyone, It is 2020 but i still love my lumia 920 windows 10 insider preview,
Many days ago i tried to roll back to windows 8.1 using WDRT but it got failed a few per cent.
when i tried again it showed in device manager as NOKIA FLASH and could not be detected in WDRT. i tried to click "My device is not detected" but detected as Unknown Manufacturer, after awhile it started to download the packages for my bricked lumia 920. but after clicking INSTALL SOFTWARE the process ended with failure.
i tried to flash using WPinternals but this is lock bootloader so i could not flash it.
tried to find many forums and websites but i got nothing.
i love my lumia 920 and want to revive it back.
Please anybody help me to fix my bricked lumia with red screen?
many thanks for everyone.
r u still there?? just thor2/wpinterals to flash a ffu
don't use wdrt,it causes problems(anyway,it breaks chinese version phones rm-822)