Hi
I have installed CM10 latest build last night. I installed latest recovery first then flash to CM10 20121111 Successfully.
Now the problem is I can't download anything from Android market or even on the website. I just get normal notification that says downloading.
I installed the rom twice,while wipe data ,cache and dalvik bit sill same problem.
Please assist.
I am by no means an expert but I will try to help.. Did you install gapps?
Sent from my LG-P999 using xda app-developers app
Mphidi said:
Hi
I have installed CM10 latest build last night. I installed latest recovery first then flash to CM10 20121111 Successfully.
Now the problem is I can't download anything from Android market or even on the website. I just get normal notification that says downloading.
I installed the rom twice,while wipe data ,cache and dalvik bit sill same problem.
Please assist.
Click to expand...
Click to collapse
You didn't wipe cashe + dalvik cash right??? Try to re install the rom, but first wipe your cashe and dalvik cashe, then install the ROM, if you still have the same issue try a factory reset, but make a nandroid backup, and back up yur apps with titanium backup!!!!!!!!
So, my S4, which I have not updated to the newest OTA update yet, is already rooted, already has a TWRP recovery, already has GooManager, and I've already downloaded the CM 10.1 Nightly I want to try.
But I don't know why it isn't working. I've told GooManager to reboot into CM 10.1 and it reboots right into TW instead.
Any ideas?
Hmmm, I don't use GooManager but have you tried just downloading and flashing using the recovery?
shaddz said:
So, my S4, which I have not updated to the newest OTA update yet, is already rooted, already has a TWRP recovery, already has GooManager, and I've already downloaded the CM 10.1 Nightly I want to try.
But I don't know why it isn't working. I've told GooManager to reboot into CM 10.1 and it reboots right into TW instead.
Any ideas?
Click to expand...
Click to collapse
Did you Flash CM first?
Try this;
1. Backup
2. Wipe data/factory reset
3. Wipe cache
4. Wipe dalvik cache
5. Install the ROM
6. Reboot
This is the standard ROM flashing procedure, should work for you.
Sent from my SCH-I545 using xda premium
This is my first time trying to install this I have a Samsung galaxy s2 T989 And I'm pretty sure I've done it right. I factory wiped it, cleared the cache and the cleared the cache in advanced settings. It's been atlesst over 10min and its still on the blue circle just spinning around.
Can someone please help me?
When I installed cm10.2 for the first time mine done that. Best bet and worked for me is do a battery pull and reboot. If that don't push you past the spinning circle which I ran across you should reinstall the ROM again and it should boot up just fine. Hope this helps
Sent from my SCH-I545 using xda app-developers app
You've bootlooped it. The T989 is a pain when flashing custom ROM's because the custom recovery's built in wipe doesn't quite work for it.
Keep this ZIP handy as you'll be needing to run it every single time you need to wipe data/cache and dalvik. Don't ever ever use any other means of wiping aside from this one until this issue is fixed. I've been doing this for a while and have flashed upwards of 20 ROM's on my T989 alone.
It's called Darkside Super Wipe.
http://forum.xda-developers.com/showthread.php?t=1477955
So, just put that ZIP on your SD card, along with your custom ROM and appropriate Gapps. Flash Darkside first (always) then flash ROM then Gapps. Then reboot and problem solved!!
Good luck!! :highfive:
So after putting that in my sd card. Install that and gapps and cm10.2?
Sent from my SGH-T989 using xda app-developers app
murtillon said:
So after putting that in my sd card. Install that and gapps and cm10.2?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yup, install Darkside Super Wipe first, then install the ROM zip then Gapps. Then reboot!
Should I factory reset and clear caches first or no?
Sent from my SGH-T989 using xda app-developers app
murtillon said:
Should I factory reset and clear caches first or no?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Nope, just run the Darkside Super Wipe and it'll erase all /system, /data and /cache partitions. And like the thread says, it won't wipe your SD card or EMMC.
Just make sure you don't leave the recovery without flashing the ROM and Gapps
Also, you should get in the habit of making backups. You can make them from CWM or TWRP's custom recovery.
Titanium backup is an application on the Google Play store that you should look into as well my friend.
T989 Tears
Very finicky phone for customs. On mine I can get no ROM to fully load other than the stock Koodo 4.04, and CM 10.0 I flashed the latest radio for JB, darkside super wipe, flash custom rom, flash gapps, wipe dalvik. The same process for every ROM i try... still no success, 10.2 stays at boot. Dirty Unicorns starts boot, goes through the "optimizing apps" stage gets to the "starting apps" and reboots, lather, rinse, repeat. I've tried a few others, AOKP and some others. Still only Koodo 4.04 and CM 10.0 will fully boot. Not even the stock T-mobile 4.03 will boot (came with phone). Going to give JMT a shot, it looks pretty
I had a ROM then it had a new version so I downloaded the new version then I flashed it and I didn't like it.
So I installed the older one again and now it's stuck on the Samsung logo when it turns on it was like that for 11 hours.
And the only way I can fix it is go to recovery and install back to the newer version...
How can I get back to the old version?
Only was is if you made a nandroid back up of the old rom
Or start from scratch again
Sent from my C6903 using XDA Premium 4 mobile app
When it bootloops go into recovery and factory reset and reboot. That should bring you out of it but if it don't then format data and cache in mounts and storage and wipe dalvik cache in advanced. If that don't work still then format data,system and cache then Reflash the rom and reboot. One of them should bring you out of a bootloop :thumbup:
HI.
I've changed roms before countless times, but now I'm trying to install a 4.4.2 rom on my Galaxy S3, and I have some problems. The installation (flash) passes with no problems, but after that, the phone won't boot. It sticks on whatever the rom's boot animation is. I've tried to wipe data, cache, wipe dalvik after this but it's still not working. Before I flash every rom, I do a factory reset, wipe the dalvik cache, and format system. I've tried with 15+ 4.4.X roms, and these are some of them: CyanogenMod, OmniROM, SlimKat, AOKP, Pacman and so on. As I said, I've flashed roms before a lot of times, without any problem. Only 4.4+ roms wont work. I tried to change the recovery, still the same result. I flash gapps with every rom too. Any idea what can be causing the problem? I'm using the latest Clockwork recovery, Sorry for my bad english and thanks.
divoom12 said:
HI.
I've changed roms before countless times, but now I'm trying to install a 4.4.2 rom on my Galaxy S3, and I have some problems. The installation (flash) passes with no problems, but after that, the phone won't boot. It sticks on whatever the rom's boot animation is. I've tried to wipe data, cache, wipe dalvik after this but it's still not working. Before I flash every rom, I do a factory reset, wipe the dalvik cache, and format system. I've tried with 15+ 4.4.X roms, and these are some of them: CyanogenMod, OmniROM, SlimKat, AOKP, Pacman and so on. As I said, I've flashed roms before a lot of times, without any problem. Only 4.4+ roms wont work. I tried to change the recovery, still the same result. I flash gapps with every rom too. Any idea what can be causing the problem? I'm using the latest Clockwork recovery, Sorry for my bad english and thanks.
Click to expand...
Click to collapse
Format data and system and cache (full wipe) also intstall the rom then boot it then flash gapps after see if that helps.
tallman43 said:
Format data and system and cache (full wipe) also intstall the rom then boot it then flash gapps after see if that helps.
Click to expand...
Click to collapse
I've already done that every time. As I said - Its not my first time flashing roms on my device. I know how to fix the general errors. This is something unusual tho.
Hey
When it bootloops, have you tried to goto recovery and see what us the cwm version??
Also try re-flashing the ROM without wipes..
Sent from my GT-I9300 using xda app-developers app
I just flashed EHNDROIX V (based on CynogenMod 4.4.2 KitKat) last night and it worked just fine.
Rooted the device with Odin, install TWRP from playstore, install TWRP recovery from TWRP, clean dalvik, clean data, clean cache, flash ROM and then flash Gapps (spesific Gapps for the ROM) and voila it worked right away.
Note:
You see, I am not using CWM but TWRP. I dunno if CWM is the one causing the problem.
Most of the weird flashing issues are due to the recovery used, you could also try the latest version of Philz recovery which has an option to wipe for new firmware.
Sent from my GT-I9300 using Tapatalk
divoom12 said:
I've already done that every time. As I said - Its not my first time flashing roms on my device. I know how to fix the general errors. This is something unusual tho.
Click to expand...
Click to collapse
Quote " Before I flash every rom, I do a factory reset, wipe the dalvik cache, and format system" You said nothing about formatting data that is why i suggested it! Next time please include all details on how you flashed the rom then It cuts down on useless post's like mine
Like everybody suggested try a different recovery ( latest one) which if you have flashed roms many times before you should have done anyway
Thanks guys, but I've already tried these things. CWM, TWRP and three other recoveries (not famous ones) haven't been able to help.
divoom12 said:
Thanks guys, but I've already tried these things. CWM, TWRP and three other recoveries (not famous ones) haven't been able to help.
Click to expand...
Click to collapse
If a rom is stuck in a loop, I would go to recovery and wipe dalvik and wipe data then reboot into same rom. This has worked for me when I've been stuck after a flash.
~ RazorMC
RazorMC said:
If a rom is stuck in a loop, I would go to recovery and wipe dalvik and wipe data then reboot into same rom. This has worked for me when I've been stuck after a flash.
~ RazorMC
Click to expand...
Click to collapse
I said that I've already done that in my First post.
divoom12 said:
HI.
I've changed roms before countless times, but now I'm trying to install a 4.4.2 rom on my Galaxy S3, and I have some problems. The installation (flash) passes with no problems, but after that, the phone won't boot. It sticks on whatever the rom's boot animation is. I've tried to wipe data, cache, wipe dalvik after this but it's still not working. Before I flash every rom, I do a factory reset, wipe the dalvik cache, and format system. I've tried with 15+ 4.4.X roms, and these are some of them: CyanogenMod, OmniROM, SlimKat, AOKP, Pacman and so on. As I said, I've flashed roms before a lot of times, without any problem. Only 4.4+ roms wont work. I tried to change the recovery, still the same result. I flash gapps with every rom too. Any idea what can be causing the problem? I'm using the latest Clockwork recovery, Sorry for my bad english and thanks.
Click to expand...
Click to collapse
Did you update your bootloader? When I flashed 4.4.2 from 4.4.1 on my s3, I had to update mine to get it to work. http://forum.xda-developers.com/showthread.php?t=2321310 hope this helps.
Sent from my unknown using XDA Premium 4 mobile app