So my dna's USB storage is unavailable after I did a factory reset from hboot. I read the FAQ about this and it just says to format the storage as fat32. Sounds simple. However under device manager it only shows up under portable devices as the model number. Nothing under removable storage or similar. Can someone please help me here? Is there a command I can run from terminal emulator on the phone? Or any other way to get the computer to recognize it needs formatting?
Any help here would be greatly appreciated as its making the camera horribly laggy
Again thanks in advance
persom55 said:
So my dna's USB storage is unavailable after I did a factory reset from hboot. I read the FAQ about this and it just says to format the storage as fat32. Sounds simple. However under device manager it only shows up under portable devices as the model number. Nothing under removable storage or similar. Can someone please help me here? Is there a command I can run from terminal emulator on the phone? Or any other way to get the computer to recognize it needs formatting?
Any help here would be greatly appreciated as its making the camera horribly laggy
Again thanks in advance
Click to expand...
Click to collapse
Format your stick in the computer not the device. Go to My computer with the stick plugged in, right click and select format
RLGL said:
Format your stick in the computer not the device. Go to My computer with the stick plugged in, right click and select format
Click to expand...
Click to collapse
Forgive me if I'm wrong,but I think you misunderstood my problem?
My phone's internal USB storage (under settings>storage-usb storage at the bottom) says unavailable. And is greyed out
persom55 said:
Forgive me if I'm wrong,but I think you misunderstood my problem?
My phone's internal USB storage (under settings>storage-usb storage at the bottom) says unavailable. And is greyed out
Click to expand...
Click to collapse
Your device does NOT have internal USB storage. Connect a USB device via an OTG cable and it will be recognized.
RLGL said:
Your device does NOT have internal USB storage. Connect a USB device via an OTG cable and it will be recognized.
Click to expand...
Click to collapse
OK I guess I misunderstood the meaning of it then.
I had done a factory reset through hboot and the camera is pretty laggy and I thought that was the reason why.
Now I need to figure why that is. Thanks for turning me off my wild goose chase though
Related
How do I enable USB Mass storage mode instead of the stupid MTP og PTP?
Regards,
BTJ
Not sure if this works for the SGS3 but it worked for the SGS2:
Bring up Settings.
Click More… (under Wireless and network).
Then select USB utilities ~ Set USB cable connection mode.
Select Connect storage to PC then.
Connect USB cable from phone to PC.
Select Turn on USB storage.
That’s all.
Sorry, no such settings in SGS3, we are stuch with MTP or PTP... Don't understand the logic behind removing USB Mass storage mode!! Both MTP and PTP are slow as hell and there is no support for S3 in libmtp at the moment to make matters worse... If I had known this, I would have reconsidered my choice of buying a SGS3.....
BTJ
Like the Nexus, /sdcard is mounted at /data/media (IIRC, mount point could be different), meaning that internal data and the internal sdcard space share the space, rather than being split. UMS removes access to the device that is mounted from the phone, so it cannot be used when the sdcard is shared in this fashion.
I thought libmtp worked? I've been using adb and a GUI for shifting lots of files, qtadb
Sent from my Galaxy Nexus using Tapatalk 2
Seems to be a problem with both SII and SIII... But I will check out qtadb, thx...
BTJ
So am I reading this right. You can't plug a USB cable in, the SD card appears then in explorer?
I have a sensation XE at moment and use this a lot for transferring files at work/home etc.
So can I not access my files normally now that I copy to SD card, eg docs etc?
Nope... But it sounds like you are using Windows so then MTP will work, kind of like you are used to...
BTJ
The idea about using MTP is it allows you to continue to use your phone without disruption, loading Mass Storage un-mounts the sd from your phone.
However I do think we should still be given a choice
Yes, I guess I understand the idea... What I don't understand is why they have removed the choice we used to have.... :-|
BTJ
I stil don't have an S3, but am a little confused on the MTP etc. Also I use a Mac and a Windows PC.
So when you plug in an S3 on a Windows PC, what does it do in MTP mode? just still allow you to drag/drop files? does the S3 come up as another drive or something in explore?
Also anyone with a Mac, how does this work?
cheers
This might give us some insight on why no USB Storage.
http://www.androidpolice.com/2011/1...behind-galaxy-nexus-lack-of-usb-mass-storage/
fylim said:
This might give us some insight on why no USB Storage.
http://www.androidpolice.com/2011/1...behind-galaxy-nexus-lack-of-usb-mass-storage/
Click to expand...
Click to collapse
I think I got the jist of that article lol but does this mean android developement were looking for devices to have either internal storage or sd storage but because the SG3 has both its sort of screwed things up a bit?
So UMS might be released in a later patch to allow easier access to added SD storage? Or does the current setting allow access to both storage thru windows pc?
Soz if I come across as a noob I havent got sg3 yet but planning to get one in a few weeks for upgrade and Ive been trying to get the low down on positives and negatives before I get the phone
Keep things simple!
Please can someone answer this simply.
Can I plug in the device into my mac/pc and just transfer any file to the micro SD card whilst it is in the phone?
All I want to do is to be able to put avi files on it as samsung kies or doubletwist doesn't seem to suppor them...
A yes or a no with and explanation would be great ta!!
pow001 said:
Please can someone answer this simply.
Can I plug in the device into my mac/pc and just transfer any file to the micro SD card whilst it is in the phone?
All I want to do is to be able to put avi files on it as samsung kies or doubletwist doesn't seem to suppor them...
A yes or a no with and explanation would be great ta!!
Click to expand...
Click to collapse
yes you can easily do that. No issues in that. Simply treat it as a normal pendrive in such a case.
sorted!
toxicthunder said:
yes you can easily do that. No issues in that. Simply treat it as a normal pendrive in such a case.
Click to expand...
Click to collapse
Thanks for the help. Although I figure out what everyone was talking about.
This is how I did it (maybe this will help others noobs as well):
You will need the 'Android File Transfer program' --> google search it!
1.Connect phone to PC (you will see usb icon at the top of the screen)
2. Pull down the notification centre.
3. Touch the usb thing.
4. Click PTP mode
5. Open the file transfer program
BOOM! Rock on nerds!
When plugging my S3 with USB it only says its a portable mediaplayer and does not show whats on my SD-card, Please help!
the fact that it shows as a portable media player is normal: that's what it shows for me when it's either rooted or stock. you should be able to click on it and see 2 storage options your internal storage and the SD card.
thegh0sts said:
the fact that it shows as a portable media player is normal: that's what it shows for me when it's either rooted or stock. you should be able to click on it and see 2 storage options your internal storage and the SD card.
Click to expand...
Click to collapse
when i click on it it says that its empty
MatzZ said:
when i click on it it says that its empty
Click to expand...
Click to collapse
do you have an SD card installed? maybe it's the drivers not working. try on another PC and see if it'll read.
Drivers Problem
This frequently happens to my computer so I know how you feel.
To solve this problem,
1. Go to devices and printers.
2. Click on your S3 device, it should be there.
3. Look at the bottom of the window
4. If it says that the device needs troubleshooting, right click the device and select troubleshoot.
5. Wait for troubleshooting to complete
6. Your SD Card and Phone memory should now pop up on your computer.
Unfortunately i have not been able to find a permanent workaround for this problem. So this solution has to be applied everytime you connect your phone to the pc.
Hit thanks if i helped you!
thanks guys! i got it working!
Did you use my solution to get it working?
I found when I use stock firmware that changing from connect to MTP to PTP and back again, my computer finds the phone, eventually but running an AOSP or Cyanogen the computer finds it without any problem
Sitting here in TWRP and can't for the life of me find out how to mount the storage for copying ROM's over. Is this something I have to do in the OS? Can I not mount anything within TWRP?
AndroidVageta said:
Sitting here in TWRP and can't for the life of me find out how to mount the storage for copying ROM's over. Is this something I have to do in the OS? Can I not mount anything within TWRP?
Click to expand...
Click to collapse
Twrp auto mounts your sdcard, just browse to where you want to go when you go to install, otherwise hit Mount and select what you want mounted.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
Twrp auto mounts your sdcard, just browse to where you want to go when you go to install, otherwise hit Mount and select what you want mounted.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
I do this! OK, I have the USB plugged in...go to Mount and it says "Select Partition to Mount". Cache and Data are selected. Nothing happens.
I check System and nothing happens.
USB OTG can't be checked and when I tap "Storage: Internal Storage (8545 MB)" it gives me "Internal Storage" and "USB-OTG"...again can't select USB-OTG.
I really can't do anything, Mount is completely useless to me. My PC recognizes that something is plugged in (get the connect/disconnect sound) but nothing pops up as far as storage and all that goes.
Soooo...anymore ideas? Am I missing something?
AndroidVageta said:
I do this! OK, I have the USB plugged in...go to Mount and it says "Select Partition to Mount". Cache and Data are selected. Nothing happens.
I check System and nothing happens.
USB OTG can't be checked and when I tap "Storage: Internal Storage (8545 MB)" it gives me "Internal Storage" and "USB-OTG"...again can't select USB-OTG.
I really can't do anything, Mount is completely useless to me. My PC recognizes that something is plugged in (get the connect/disconnect sound) but nothing pops up as far as storage and all that goes.
Soooo...anymore ideas? Am I missing something?
Click to expand...
Click to collapse
Sounds like you're trying to use your PC as a USB device? Not the way it works, that's for USB flash drive type devices, not pulling stuff from your PC. Either place the ROM on the SD card, use a USB drive on an OTG cable, or use adb sideload while connected to the oc to flash from the PC storage instead of the SD card.
Putting the ROM on the SD card will probably be best.
Tapatalked from my HTC DNA - Carbon
OOOOOOOK...so direct connection isn't possible? Got OTG to work with my OTG cable and flash drive. Worked perfectly. Not as convenient but it works. Thanks!
AndroidVageta said:
OOOOOOOK...so direct connection isn't possible? Got OTG to work with my OTG cable and flash drive. Worked perfectly. Not as convenient but it works. Thanks!
Click to expand...
Click to collapse
You can do adb sideload from the PC for a direct connection.
Tapatalked from my HTC DNA - Carbon
Meh, which ever works. Either way I got the problem solved, thanks to you!
I really love how easy it is to use TWRP with an OTG USB drive. Makes backing up and flashing very nice on a phone with limited storage.
I think he was saying he wanted to copy from his PC to internal storage while he was on TWRP...
Yes?
Phaded said:
I think he was saying he wanted to copy from his PC to internal storage while he was on TWRP...
Yes?
Click to expand...
Click to collapse
That's what I was thinkin...
Sent from my HTC6435LVW using Tapatalk 4 Beta
Hello,
When I updated my S3 to 4.3 from 4.1.2, it was terrible. It was very laggy, my screen didn't show when pressing the Power Button or the Home Button, and I thought that resetting to factory might fix it. Well, I was so desperate to make my phone work better that I didn't realize that all my files were on the internal storage, I don't have an SD Card. So, I've lost everything.
Now, I'm trying to recover some photos, but I can't connect my phone as USB mass storage to use a recovery soft on Windows 8. I rooted my phone, installed USB Mass Storage Enabler app, but it shows two drives (H: and I, but I can't access those. It gives me "Please insert a disk into Removable Drive (LETTER"
Please help, I did everything I found on forums, but still nothing. Those files might be lost, but now I have another battle.. Making my phone available in Mass Storage.
And by the way, it still works terrible with 4.3. Hate it so much!
Have you installed USB drivers ???
Have you read the stickied storage/ recovery thread ??
bughy said:
Hello,
When I updated my S3 to 4.3 from 4.1.2, it was terrible. It was very laggy, my screen didn't show when pressing the Power Button or the Home Button, and I thought that resetting to factory might fix it. Well, I was so desperate to make my phone work better that I didn't realize that all my files were on the internal storage, I don't have an SD Card. So, I've lost everything.
Now, I'm trying to recover some photos, but I can't connect my phone as USB mass storage to use a recovery soft on Windows 8. I rooted my phone, installed USB Mass Storage Enabler app, but it shows two drives (H: and I, but I can't access those. It gives me "Please insert a disk into Removable Drive (LETTER"
Please help, I did everything I found on forums, but still nothing. Those files might be lost, but now I have another battle.. Making my phone available in Mass Storage.
And by the way, it still works terrible with 4.3. Hate it so much!
Click to expand...
Click to collapse
Unfortunately I think USB Mass Storage in the way it is implemented in 4.x for the moment can only share the external SD, the internal one is never visible.
IMHO the only approach to recover "something" is to get an external microSD larger than the internal partition and create a block copy (with dd under adb in CWM/Philz recovery for instance) of the entire "internal SD" partition - that one will be an EXT4 (Linux) partition) and there is a very, very small chance that you might recover some stuff from it (I doubt but who knows).
Yes, i have the Samsung USB Driver for mobile phone (1.5.29.0)
No, didn't read the storage/recovery thread.
Oh well...
Such error happens if transfer breaks unexpectedly. Think what file did you send lastly and delete it, it should fix your issue.
If you can't remember or it did not, formatting your external sd card will fix it for sure.
JustArchi said:
If you can't remember or it did not, formatting your external sd card will fix it for sure.
Click to expand...
Click to collapse
I don't have a sd card.
bughy said:
I don't have a sd card.
Click to expand...
Click to collapse
Ah, you're talking about internal one.
Well, then your magic program doesn't work properly. Perhaps you could try boeffla kernel and it's UMS.
Hello guys,
This is my first post and this place is still new to me so bare with me.
I have a Samsung Galaxy S2 Plus. Rooted. Android 4.2.2
I am looking to recover some deleted files in the internal storage however whenever I plug in the USB to the PC, programs like "Paragon Backup and Recovery" and "Remo Recover for Android" cannot detect the device.
USB Debugging is checked.
I have been searching but no luck. Maybe someone here can help.
Thanks!
try kies and wandojia to update the lastest driver, it would help
LucciMane said:
Hello guys,
This is my first post and this place is still new to me so bare with me.
I have a Samsung Galaxy S2 Plus. Rooted. Android 4.2.2
I am looking to recover some deleted files in the internal storage however whenever I plug in the USB to the PC, programs like "Paragon Backup and Recovery" and "Remo Recover for Android" cannot detect the device.
USB Debugging is checked.
I have been searching but no luck. Maybe someone here can help.
Thanks!
Click to expand...
Click to collapse
sometimes change to another port would help
and also, you could switch mode (MTP, Camera, Mass Storage) and sometimes with debugging.
Eventually your PC would recognize and thus you could access to the internal data!
TRY harder man
GodShot said:
sometimes change to another port would help
and also, you could switch mode (MTP, Camera, Mass Storage) and sometimes with debugging.
Eventually your PC would recognize and thus you could access to the internal data!
TRY harder man
Click to expand...
Click to collapse
I tried all that. There is no option for Mass Storage. Otherwise I wouldn't be here lol.
Are you sure you have installed every drivers?
LucciMane said:
I tried all that. There is no option for Mass Storage. Otherwise I wouldn't be here lol.
Click to expand...
Click to collapse
Make sure every driver is properly installed?
You could use the Chinese synchronizing software "Wandojia". It could auto-detect and install the driver for you!
Or sometimes the option is hid under the category of more settings- wireless and networks- USB utilities
Or in storage, but you have to press menu to select the option
Just keep trying, good luck !