Related
Huawei Germany did publish an official release of ICS 4.0.3 at their website huaweidevices-dot-de for the Mediapad.
Regards,
Thomas
could you check if Finnish language is included
@mrpn900: If "Suomi" is the correct entry for Finnish, then yes, it is included.
I attached 3 screenshots showing all the included languages. I hope it helps other users with the same question about their language, too.
thank's a lot! General version did not include Suomi, so I have to reflash with the German version.
What are changes between this and HUAWEI MediaPad FIRMWARE(S7-301u,android4.0,C232B002,General Channel) ?
I don't think there was a changelog published, but the main difference is the "Channel" -> while the C232 Versions are for "general channel" i.e. the international version of the ROM, this ROM is C167 "German Channel" - probably some settings are included for german SIMcards / WiFi Channels? (Please correct me if I'm wrong)
Before I flashed this ROM I was on HUAWEI_S7-301u_FIRMWARE_android4.0_C232B002_General_Channel_05010YBX-root - the main difference I noticed during the last 3 days of usage was better batterylife. While on the old ROM (C232) I had a batterydrain of 1% per hour in standby, this ROM (C167) is really good in that regard. Around 1% batterydrain during 10 hours of Standby is more than acceptable, imho.
does the Huawei cloud storage work with this version? It does not work with the general version for me. Only way to get to the storage now is desktop
root?
Hi, noob here!
got the pad from one m8 saturday, rooted, with ICS 4.0.3 gen. chan....
Don't care about SIM and 3g, won't use it (couch, surfin'...), but is this rom rooted, as some from main Huawei site? Will I loose root flashing it?
thx...
---------- Post added at 12:08 PM ---------- Previous post was at 11:19 AM ----------
Ok, reading is learning!
http://forum.xda-developers.com/showthread.php?t=1570265
Did anyone try it on this rom, already?
mrpn900 said:
does the Huawei cloud storage work with this version? It does not work with the general version for me. Only way to get to the storage now is desktop
Click to expand...
Click to collapse
Huawei cloud apps are not included in the German Channel release.
BTW: The official download link is http://huaweidevices.de/download.php?d=mediapad&f=Huawei_Mediapad_ICS_FIRMWARE(S7-301u_andr4.0.3_C167B003_German_Vers).zip
---------- Post added at 02:41 PM ---------- Previous post was at 02:34 PM ----------
nmsys said:
Ok, reading is learning!
http://forum.xda-developers.com/showthread.php?t=1570265
Did anyone try it on this rom, already?
Click to expand...
Click to collapse
There is a pre-rooted version uploaded by Comec (all credit to him) in the German android-hilfe.de MediaPad subforum:
Huawei_Mediapad_ICS_FIRMWARE(S7-301u_andr4.0.3_C167B003_German_Vers)_ROOT.part2.rar
Huawei_Mediapad_ICS_FIRMWARE(S7-301u_andr4.0.3_C167B003_German_Vers)_ROOT.part1.rar
Changes to the rom: rooted, SuperUser.apk, init.d support, support for German keyboard layout for external devices.
Use at your own risk! Works as normal dload update. MediaPad will be reset to factory defaults. Save your app-data.
Thanx for your advertising cloogshizer...
Here's another link to the german version..
@ htc-developers.de
I use the rooted version from comec. It does run smooth and stable.
Regards,
Thomas
Vielen Dank fuers Antwort, cloogshizer!
Sorry Mod, english forum, I know...
Will try it this weekend and report also. It seems, for what I've read so far the best rom available -regardind deep sleep batt. issues, and in-browsing reboots. Many thx Comec!
Cheers, and thx for your kindness!
Anyone noticed any difference with this one comparedto the general version?
mangoman said:
Anyone noticed any difference with this one compared to the general version?
Click to expand...
Click to collapse
I didn't use the general version myself, but AFAIK the Huawei cloud apps are missing in the 167 version.
well, i noticed the switch between edge\3g\h is much better.
With the general version it would go to edge, then not go to 3g and h when available.
Had to change from wcdma preferred to wcdma only. With this one wcdma preferred seems to work. Atleast it doesnt go to edge in the same places.
Need some more testing to confirm, but it looks like a major reason to use the german version.
huawei released kernel source code so developers can start developing custom roms
But only for Honeycomb, afaik.
http://www.huaweidevice.com/worldwi...nfoId=3135&directoryId=5011&treeId=3290&tab=0
maybe custom rom based on honeycomb with many tweaks and modded kernel would be better than official ics
I would like to know if the call settings entry on the Settings menu could be added to allow us to get to the native SIP/internet calling support that is supposed to be in ICS. Can that be added?
anybody know which is the latest ealease containing language Suomi?
Thread Moved to Original Development.....
http://forum.xda-developers.com/showthread.php?p=48535961#post48535961
Larga vida al p500!!
Wait for a stable build like 4.2 or in dremas 4.0.4
Enviado desde mi Nexus 4 mediante Tapatalk
you must have recovery in this thread to flash:
http://forum.xda-developers.com/showthread.php?p=48367371#post48367371
Hey Hephappy!
Why did you leave XDA? We need you!
Your ROMs were first of the kind for our device. Moreover, good developers are leaving development of this device because they have moved on to another device.
Optimus One users want good ROMs too!
Hephappy left xda but still actively working on P500
rhar**** said:
Hey Hephappy!
Why did you leave XDA? We need you!
Your ROMs were first of the kind for our device. Moreover, good developers are leaving development of this device because they have moved on to another device.
Optimus One users want good ROMs too!
Click to expand...
Click to collapse
I don't know why he left but he is still working on P500 and all his works will be available for us.
LG-P501 said:
I don't know why he left but he is still working on P500 and all his works will be available for us.
Click to expand...
Click to collapse
Thank god he didn't leave dev. Hats off to you
Feedback - [DEV][ROM][4.4.2] [CM11] KITKAT for LG-P500[WIP][VER-1]
I've been using this KITKAT Rom (from 27. December) for 5 days now and I'm really impressed of it - thx goes to mukulsoni and hephappy.
My feedback here, since I'm not allowed to post on a dev thread:
- Battery backup is acceptable with 2 days for me (Wifi off, Location off, low usage)
- Installed Calendar from PlayStore and calendar syncronization is working
- If you do not want to use Hangeout as you default sms client you can install 8sms from the PlayStore instead (which I did)
- Not Working:
- Wifi Tethering (@mukulsoni please add to not working list)
- voice search does not work for me (maybe someone else knows how to get it working?)
- overall performance (smartassV2, 240-710) is good but not snappy (I'm using a class 10 8GB sdcard).
Conclusion:
@all who are interested in KITKAT on our old P500, give the linked ROM a try - you won't be disappointed.
androidck said:
I've been using this KITKAT Rom (from 27. December) for 5 days now and I'm really impressed of it - thx goes to mukulsoni and hephappy.
My feedback here, since I'm not allowed to post on a dev thread:
- Battery backup is acceptable with 2 days for me (Wifi off, Location off, low usage)
- Installed Calendar from PlayStore and calendar syncronization is working
- If you do not want to use Hangeout as you default sms client you can install 8sms from the PlayStore instead (which I did)
- Not Working:
- Wifi Tethering (@mukulsoni please add to not working list)
- voice search does not work for me (maybe someone else knows how to get it working?)
- overall performance (smartassV2, 240-710) is good but not snappy (I'm using a class 10 8GB sdcard).
Conclusion:
@all who are interested in KITKAT on our old P500, give the linked ROM a try - you won't be disappointed.
Click to expand...
Click to collapse
Did not like the Dec 27 build.
I am running the Omni preview which is more or less cm-11. Favorably impressed.
Offline voice search will not work on our armv6 device. Thanks Google.
Online voice does work. Use voice dictation or swype/dragon to get it into google search. Must tap search, but ...
Actually, something before getting the voice is what armv6 stops. I cannot reproduce how I got there, but I had it actually, init, take my voice and get results!! Once, just once. So ... who knows?
Dovidhalevi said:
Did not like the Dec 27 build.
I am running the Omni preview which is more or less cm-11. Favorably impressed.
Offline voice search will not work on our armv6 device. Thanks Google.
Online voice does work. Use voice dictation or swype/dragon to get it into google search. Must tap search, but ...
Actually, something before getting the voice is what armv6 stops. I cannot reproduce how I got there, but I had it actually, init, take my voice and get results!! Once, just once. So ... who knows?
Click to expand...
Click to collapse
So it seems that online voice search is not working for now.
Why do you prefer the Omni preview? Could you please give some more details?
androidck said:
So it seems that online voice search is not working for now.
Why do you prefer the Omni preview? Could you please give some more details?
Click to expand...
Click to collapse
I took this because this is what is being developed right now, where fixes are going.
On-line voice does work. Go to settings->language&input->voice recognition. Since you are likely running with Google Search around, you will see two (count 'em) google options here. Choose the other one.
If you only see one, you need to install the old VoiceSearch.
Feedback - [DEV][ROM][4.4.2] [CM11] KITKAT for LG-P500[WIP][VER-3]
Changes between Ver1 and Ver3 I encountered
- battery consumption seems to be improved a little bit
- stock SMS/MMS app included now (no need for Hangout or 8sms)
- "national roaming" support seems to be gone now (new MVNO Settins are unclear for me - any hints are welcome)
- camera problems
- autofocus does not work anymore - focus does not go green (worked on Ver1)
- choosing HDR option leeds to FC of camera app (to disable HDR you have to clean App Settings)
Trying to record a video freezed the phone (gave me an FC on Ver1) - had to remove the battery.
Experiences from other users are welcome.
Ver6-New:
I am not able to install this version oder version 5 - status 7 error (some symlinks missing)
New Experimental released Jan 14, 2014
A new experimental build has been released at Jenkins.cm_p500-userdebug-cm-11.0:victory:
can not install Ver6-New - symlinks missing
I am not able to install this version over version 5 - status 7 error (some symlinks missing)
Has anybody a clue? I already downloaded this version twice.
I had no problems installing the old Ver6 before. Unfortunately I've deleted the old Ver6 ;-(.
androidck said:
I am not able to install this version over version 5 - status 7 error (some symlinks missing)
Has anybody a clue? I already downloaded this version twice.
I had no problems installing the old Ver6 before. Unfortunately I've deleted the old Ver6 ;-(.
Click to expand...
Click to collapse
Wrong thread.
Dovidhalevi said:
Wrong thread.
Click to expand...
Click to collapse
I am not allowed to post in dev thread, so please be lenient towards me.
Back to my update problem: I already checked md5 hash and in Addition I repartioned and formatted my sdcard, formatted system and tried to flash via recovery (ver from 16th january) - but same error.
Is it possible that system of this rom is almost full and that some memory blocks of my system storage is dead? It is just an assumption or guess, but if too few memory could cause such an upgrade failure, which apps are secure to remove?
Once again, thx for any hints.
androidck said:
I am not allowed to post in dev thread, so please be lenient towards me.
Back to my update problem: I already checked md5 hash and in Addition I repartioned and formatted my sdcard, formatted system and tried to flash via recovery (ver from 16th january) - but same error.
Is it possible that system of this rom is almost full and that some memory blocks of my system storage is dead? It is just an assumption or guess, but if too few memory could cause such an upgrade failure, which apps are secure to remove?
Once again, thx for any hints.
Click to expand...
Click to collapse
Ok, now try flashing any older cm 10.1 or 10.2 over the new recovery (jan16) and let me know the status. You can write on my thread after completing your 10th post.
mukulsoni said:
Ok, now try flashing any older cm 10.1 or 10.2 over the new recovery (jan16) and let me know the status. You can write on my thread after completing your 10th post.
Click to expand...
Click to collapse
I already installed version 5 which didn't cause any problems. But I will try an older cm version in addition. I'll post the result afterwards.
@mukulsoni: I installed 10.1.6 (hephappy) without any problems.
Could you please provide the old Version6 rom again. I want to install this version until there is a (I find) a solution for my specific problem.
Thanks in advance.
androidck said:
@mukulsoni: I installed 10.1.6 (hephappy) without any problems.
Could you please provide the old Version6 rom again. I want to install this version until there is a (I find) a solution for my specific problem.
Thanks in advance.
Click to expand...
Click to collapse
Strange, you are able to install version 5 but not 6! anyways here is the version 6 old link but install it over version 5 only. http://forum.xda-developers.com/showpost.php?p=49845686&postcount=482
mukulsoni said:
Strange, you are able to install version 5 but not 6! anyways here is the version 6 old link but install it over version 5 only. http://forum.xda-developers.com/showpost.php?p=49845686&postcount=482
Click to expand...
Click to collapse
Thank you for the link. I flashed that version 6 over version 5 sucessfully. As you said, it is really strange that i can not install the 6-new version. But for now I am happy with it. If you are able to find any possible explaination I am still curious to know of course.
Hello everyone,
First of all, I'd like to thank you all for the help you've already given me (unknowingly). I have been using this forum a lot the past few days, as well as checking out multiple YouTube videos. These all helped me out tremendously in the adventure I undertook in order to boost the performance of my phone.
I've already encountered numerous issues with my phone in the process and like most beginners, I've also had a few moments where I thought "Okay, it finally happened - it's dead". However, I somehow managed to revive it time after time. Don't worry though - this is not a thread where I claim my phone to be bricked. But I do have a few questions which most of you have probably already answered here and there. If that's the case, I truly apologize. Please know that I tried hard to find all the answers myself, but that I have reached a dead end.
-----
Yesterday, I finally installed CM 10 on my Xperia U. Why? Because I did not quite like the Sony UI and my phone was seriously under-performing battery-wise. Next to that, I really seemed to like the stock android interface (at least from afar). Hence, I downloaded the FXP CM10 from the official FXP website (cm-10-20131224-FXP-kumquat.zip). I must say that the functionality of this ROM is way better than Sony's original UI. The options you have for setting up the device, the way you can respond to incoming messages (read, quick reply, ...), the widget for messaging, etc. It would've been perfect even, if not for these issues:
1. The camera is inverted. Very strange, as I read that people were complaining about the time it takes to start up the camera app, but not that the camera was inverted. I thought that that issue was fixed, but apparently not.
2. I cannot seem to change the layout of the keyboard - an issue with which I am willing to live.
3. I can't add a corporate account. When I set up my mail account, it works like a charm. However, when I want to link an account to import my contacts, it claims that it can't connect to the server. On the internet I found out that you have to set the server to m.google.com - but then it says I don't have permission to sync with this server. I do not have Gapps (Google Apps) installed, could that be the reason?
4. Yesterday, my phone didn't want to unlock on two occasions - it just didn't respond. However, today I haven't had any issues so no problem for me.
Now maybe all of this can be fixed rapidly. You see, before I installed CM 10, I actually wanted to install the FXP 216 CM 9. According to Mark Sohan (YouTube account), this was the most stable ROM for an Xperia U. However, I can't seem to get my hands on it. I can't find it on the FXP site either (no longer supported?).
So my first question would be: Where can I download CM9 Kumquat (FXP 216)?
My second question would be: is it possible to fix issue 1 and 3? If so, how?
And if you would no longer advice CM 9, which one would you advice? Where can I find a (stock) ROM which works perfectly well with my Xperia U? Please note that I am looking for a stable (FXP) ROM, not necessarily the most recent one. As long as it's stable and offers the same functionality as CM 10, I'd be more than happy!
Information about the installation, might be useful:
I flashed the Sony stock ROM (.54)
In fastboot mode, I installed the boot.img from the Kumquat file using Flashtool.
Booted the phone, went in CWM and cleared the data/cache/something else - forgot name - might have also done a factory reset and then installed the zip file from the "SD card".
My phone is rooted, unlocked and has CWM.
Thank you all a lot in advance. Hopefully these issues can be solved, so that I can fully enjoy this ROM.
Kind regards,
Simen
@simensimen
FXP 216 is not found, according to this statement, focused on improving everything in CM 9
This build is nearly complete and should make it into the 9.0 final release on time.
Enjoy!
http://forum.xda-developers.com/showthread.php?t=1876927
Click to expand...
Click to collapse
seems FXPCM 9 to be the best for you
Based on FXP CM 9
http://forum.xda-developers.com/showthread.php?t=2133724
for solve some you problems
1.use this.
Na'onak said:
Here is a fix for reverse camera bug:
| Download Link: http://d-h.st/f1X
| Just flash zip via recovery
| Big thanks to @percy_g2
Click to expand...
Click to collapse
try install other keyboad (googke keyboard mayby)
Google keyboard
only developers can fix it
from what I've read FXP 10 has several errors, and there has been no development on that, it is best that you move to another ROM, but you have to open your mind and not only we want FXP, because there are good ROM Developer.
I recommend this
http://forum.xda-developers.com/showthread.php?t=2414390
Hello,
Thank you very much for your answer.
The first link you refer to, is one that I already knew. The links go to the FXP download page and the one for CM 9 Kumquat is not available.
I had just found that link for the camera fix myself as well and it worked. That's great. However, to me, the biggest issue is °3.
Can you tell me if none of my issues exist in the ROM that you recommend? If so, I'll install it straight away!
Thanks again!
Kind regards,
Simen
simensimen said:
Hello,
Thank you very much for your answer.
The first link you refer to, is one that I already knew. The links go to the FXP download page and the one for CM 9 Kumquat is not available.
I had just found that link for the camera fix myself as well and it worked. That's great. However, to me, the biggest issue is °3.
Can you tell me if none of my issues exist in the ROM that you recommend? If so, I'll install it straight away!
Thanks again!
Kind regards,
Simen
Click to expand...
Click to collapse
is a pleasure to help colleague
I've never had to use corporate accounts, so I have an answer to that, so I can say you that it is very stable, everything works fine when I had installed had great performance for me, I had no problems syncing my emails normal.
Enviado desde mi Xperia U mediante Tapatalk
simensimen said:
Hello,
Thank you very much for your answer.
The first link you refer to, is one that I already knew. The links go to the FXP download page and the one for CM 9 Kumquat is not available.
I had just found that link for the camera fix myself as well and it worked. That's great. However, to me, the biggest issue is °3.
Can you tell me if none of my issues exist in the ROM that you recommend? If so, I'll install it straight away!
Thanks again!
Try out slimbean rom based on cm9. It is much more stable and functional.
Click to expand...
Click to collapse
DO NOT FLASH THIS ON A TOUCHWIZ ROM. AOSP BASED ONLY
This is a custom GApps package I created to work with x86 devices (namely, our tab) as the normal GApps packages available are arm-only. (and no, to those who would ask, it's not as simple as downloading PA-GApps and swapping the update binary. The actual files therein are NOT x86 compatible, namely, the libs.)
UPDATE 1: With the release of 4.4. for the P5210, I am pleased to announce that this is now a full, complete, stable GApps package
It contains everything found in the PA-GApps stock zip plus:
-Hackers keyboard
-Root browser
-Xperia home
note that Hacker's keyboard and Xperia home are just there in case google keyboard / google home don't work out of the box. I don't anticipate any problems, but just to be sure. After some feedback / testing i'll remove these if people want. Root browser however is here to stay.
UPDATE 2:
As of the 20140823 build, this is now a UNIVERSAL x86 GApps package, meaning it will work on ANY x86 device running 4.4.x with zero tinkering to the zip. I did this by using a slightly modified pa-gapps updater-script coupled with an x86 update-binary.
UPDATE 3:
The 20140826 build is mostly bug fixes. The updater-script in the 20140823 build was broken. This is now fixed. Google + was broken. This is also fixed.
Google keyboard was broken. This too, is now fixed.
Tested this build myself. All is well.
For those who want a ROM to try this with, head over to @moonbutt74 's thread "odds, ends tests". He posted a successful 4.4.4 build from a few days ago on i think the 4th or 5th post (though it is by NO MEANS dd ready. We're working on it)
DOWNLOAD LINK IS BELOW.
If you want to use this for any reason other than personal use, ask me first, unless you just want to include a link on your ROM thread. If you do want to include a link in your ROM thread, link to this thread, not the download link below.
Download link:FrankenGApps-x86-20140826
old builds:
20140823 build:
FrankenGApps-x86-20140823.zip
The updater script in this build is broken. On top of that, if you fix it yourself, google + and google keyboard are borked.
20140814 build:
FrankenGApps-x86-20140814.zip
This build only works with the tab 3 10.1.
Old legacy hackey build:
FrankenGApps-x86-20140813.zip
there is absolutely no reason to flash the 20140813 build over newer builds. The 20140813 build is an unstable / hackey 4.2 gapps port, I'm just posting it for reference purposes. Naturally this build is unsupported. Please download the new build(s) from OP.
if i flash the build of 14th then i stuck on samsung boot logo. firmware was stock rooted deodexed 4.4.2. i have tryed it twice but always stuck on boot logo.
evilspawnas said:
if i flash the build of 14th then i stuck on samsung boot logo. firmware was stock rooted deodexed 4.4.2. i have tryed it twice but always stuck on boot logo.
Click to expand...
Click to collapse
I was sameway, so I just downloaded the update from "sammobile" installed it and used " super Su from chailfire to get root also used root explore to take out the apps I did not need.
@evilspawnas
@ghforlife
Why did you flash this on a touchwiz rom?
This zip is meant for aosp based ROMs like cm11. (I tested this package on @moonbutt74's wip cm11 build, works like a charm)
Besides, TW Roms have GApps built in
Restl3ss said:
@evilspawnas
@ghforlife
Why did you flash this on a touchwiz rom?
This zip is meant for aosp based ROMs like cm11. (I tested this package on @moonbutt74's wip cm11 build, works like a charm)
Besides, TW Roms have GApps built in
Click to expand...
Click to collapse
Oh, sorry, but all the other devices have cm 11, it´s like my normal behaviour to flash gapps... shame on me
Just updated to 20140823.
As of now, this GApps package is universally compatible with all x86 devices running 4.4.x. Zero tinkering to the zip necessary.
Just updated to 20140826. This build fixes updater-script, google keyboard, and google +. Read "update 3" in OP for more info.
Nice
Another stone in building our road to CM11. Thanks.
I know many will used this update.
To be honest, I am forced to used the market, but try to stay away from C I A applications. I am sorry did I say C I A. My apologies it is the Alzheimer, I mean Google.
( Central Intelligent in Android)
so how would one go about installing this on a dell xps12 running intels official haswell build of kitkat?
(https://01.org/android-ia/downloads/android-4.4.2r1-ia0)
Manually place the files with root explorer?
thanks
i love your rom man..been running pimpdroid since day 1 of this tablet...this is the only kitkat rom for this device on kitkat..im bout to try your modified gapps ...im not near as a advanced user than you..and i dont really understand some of the things you talk about..but im gonna go ahead and ask...what are the advantges of installing this gapps package opposed to keeping the ones flashed with your pimpdroid rom?....sorry if this is a dume question...this is first ive seen of a modified gapps package...can u be more specfic bout what would be diff?...or is it jus a more like internal thing..and i wont really notice nothing diff being a nebie and all i guess..dont really consider myself such a nebie..but compared to dev like yourself..def..am..
lucky_515 said:
i love your rom man..been running pimpdroid since day 1 of this tablet...this is the only kitkat rom for this device on kitkat..im bout to try your modified gapps ...im not near as a advanced user than you..and i dont really understand some of the things you talk about..but im gonna go ahead and ask...what are the advantges of installing this gapps package opposed to keeping the ones flashed with your pimpdroid rom?....sorry if this is a dume question...this is first ive seen of a modified gapps package...can u be more specfic bout what would be diff?...or is it jus a more like internal thing..and i wont really notice nothing diff being a nebie and all i guess..dont really consider myself such a nebie..but compared to dev like yourself..def..am..
Click to expand...
Click to collapse
Hey brother don't dare to flash it.... It's not for a Touchwiz rom like pimpdroid or Cagrom., It's for AOSP rom like Omni rom , AOKP , CM11 , AICP etc....
Sent from my GT-S6802 using XDA Free mobile app
Thanks for the gapps, working on my 3830 AOSP rom.
Restl3ss said:
DO NOT FLASH THIS ON A TOUCHWIZ ROM. AOSP BASED ONLY
This is a custom GApps package I created to work with x86 devices (namely, our tab) as the normal GApps packages available are arm-only. (and no, to those who would ask, it's not as simple as downloading PA-GApps and swapping the update binary. The actual files therein are NOT x86 compatible, namely, the libs.)
UPDATE 1: With the release of 4.4. for the P5210, I am pleased to announce that this is now a full, complete, stable GApps package
It contains everything found in the PA-GApps stock zip plus:
-Hackers keyboard
-Root browser
-Xperia home
note that Hacker's keyboard and Xperia home are just there in case google keyboard / google home don't work out of the box. I don't anticipate any problems, but just to be sure. After some feedback / testing i'll remove these if people want. Root browser however is here to stay.
UPDATE 2:
As of the 20140823 build, this is now a UNIVERSAL x86 GApps package, meaning it will work on ANY x86 device running 4.4.x with zero tinkering to the zip. I did this by using a slightly modified pa-gapps updater-script coupled with an x86 update-binary.
UPDATE 3:
The 20140826 build is mostly bug fixes. The updater-script in the 20140823 build was broken. This is now fixed. Google + was broken. This is also fixed.
Google keyboard was broken. This too, is now fixed.
Tested this build myself. All is well.
For those who want a ROM to try this with, head over to @moonbutt74 's thread "odds, ends tests". He posted a successful 4.4.4 build from a few days ago on i think the 4th or 5th post (though it is by NO MEANS dd ready. We're working on it)
DOWNLOAD LINK IS BELOW.
If you want to use this for any reason other than personal use, ask me first, unless you just want to include a link on your ROM thread. If you do want to include a link in your ROM thread, link to this thread, not the download link below.
Download link:FrankenGApps-x86-20140826
Click to expand...
Click to collapse
Questions:
1. Does this work with LineageOS 14.1 [Android 7.1.2]
2. Where are the instructions on how to install this?
SerjSev said:
Questions:
1. Does this work with LineageOS 14.1 [Android 7.1.2]
2. Where are the instructions on how to install this?
Click to expand...
Click to collapse
These gapps are 6 years old and for older versions of android. Go to opengapps.org for android 7.1.2 based gapps.
And also why do you need instructions? Same as all gapps just flash the zip after flashing the rom
garylawwd said:
These gapps are 6 years old and for older versions of android. Go to opengapps.org for android 7.1.2 based gapps.
And also why do you need instructions? Same as all gapps just flash the zip after flashing the rom
Click to expand...
Click to collapse
Owh Hi, okay ?
Never thought someone would answer, the Tab 3 10.1 page on XDA is sadly dead, other models too for the Tab 3. And i still have the device! Ha. Did you like get notified when i replied to this thread that you checked? Because i was surprised, never thought again someone would answer to this old page part of XDA! I would love to talk with you and etc, cause im kinda lonely here lol, i know the device is old but old is gold! People can make many mods for it! Ill wait for your reply
SerjSev said:
Owh Hi, okay ?
Never thought someone would answer, the Tab 3 10.1 page on XDA is sadly dead, other models too for the Tab 3. And i still have the device! Ha. Did you like get notified when i replied to this thread that you checked? Because i was surprised, never thought again someone would answer to this old page part of XDA! I would love to talk with you and etc, cause im kinda lonely here lol, i know the device is old but old is gold! People can make many mods for it! Ill wait for your reply
Click to expand...
Click to collapse
I have a tab 3 10.1 WiFi so if anything pops up around these threads I always have a look.
The tablet is still working fine for me without any gapps on it as I've found gapps are extremely heavy on such an old tablet. Instead I opted for a microg installation and it works perfectly (even being able to play games like bullet force or fwd assault) but i mostly use it for reading and cooking and that kind of stuff which it is perfect for.
garylawwd said:
I have a tab 3 10.1 WiFi so if anything pops up around these threads I always have a look.
The tablet is still working fine for me without any gapps on it as I've found gapps are extremely heavy on such an old tablet. Instead I opted for a microg installation and it works perfectly (even being able to play games like bullet force or fwd assault) but i mostly use it for reading and cooking and that kind of stuff which it is perfect for.
Click to expand...
Click to collapse
Owhh, i see. I put this rom on my tab: https://forum.xda-developers.com/galaxy-tab-3/development-10/rom-lineageos-14-1-t3587761
It does lag sometimes, but i removed some of the GApps it came with. I mean, the second i removed playstore some other Google apps stopped working so i had to delete them too. It's a bit better, but i dont play games on it, it's still laggy i should've chosen another ROM but i guess this is fine. Which ones are you using? If you want we can talk in discord, or here if you want, which ever way you fele comfortable. I can share the apps i have and etc, since we have the same tablet, finally i found someone in 2020 having the same device as i have! Ha. I'm still here, so if you reply and i wont answer, i will answer later, i have schedule to follow that's why
Ill wait for your response, anywhere, if you want dm me here, chat in this thread or check my discord, send a friend request and tell me here ur name so I'd accept it. You can also find me in the XDA discord server.
garylawwd said:
I have a tab 3 10.1 WiFi so if anything pops up around these threads I always have a look.
The tablet is still working fine for me without any gapps on it as I've found gapps are extremely heavy on such an old tablet. Instead I opted for a microg installation and it works perfectly (even being able to play games like bullet force or fwd assault) but i mostly use it for reading and cooking and that kind of stuff which it is perfect for.
Click to expand...
Click to collapse
Hey, where have you been?
Q&A for [ROM] [4.4.4] [F2FS] CM11.0/SGT7 for P4WIFI and P4 [20141008]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] [F2FS] CM11.0/SGT7 for P4WIFI and P4 [20141008]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
P4Wifi Mirroring
Hello,
Would it be possible to add:
* The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix" remote submix module. This module is used to record and stream system audio output to the WiFi display encoder in the media server.
* The remote submix module "audio.r_submix.default" must be installed on the device.
To the 4.4.4 Rom here: http://forum.xda-developers.com/showthread.php?t=2098429&page=88
Thank you for your assistance in advance.
Regards,
Dan
Banks Gapps n/a
I have noticed the Banks Gapps are no longer there. After some searching I have found a replacement package here for future people who would like to install this Rom with Gapps.
http://forum.xda-developers.com/showthread.php?t=2397942
Contacts won't start
In your 4.4.4 Rom for Samsung Galaxy Tab 10.1 3G when I start the Contacts "People" app it immediately stops and I get the message.
"Unfortunately, Contacts has stopped working....ok"
I can send you a log but I do not know how to do it...never done it yet...help!
I really like this ROM and have the latest version installed and it really works well so far...2 days now.
Better than CM10.2 so far...please don't stop working on this ROM.
Thanks for a great job.
3G not working
I have just today noticed that the 3G is not working. It does not detect any networks so I cannot register on my network with my working sim.
Wifi does work but the 3G SIM version does not...so I'm not sure why there is a 3G version if it does not work.
Pity...I will have to restore my previous ROM...
CM11.0 Installation:
* Make sure you have the correct bootloader installed. You need the ICS bootloader. You can find it on pershoots droidbasement. Flash via Odin.
Click to expand...
Click to collapse
Please tell me the instructions.
I have experience with flash Odin.
==========ANSWER============
http://forum.xda-developers.com/showpost.php?p=36077123&postcount=1
Finefeather said:
I have just today noticed that the 3G is not working. It does not detect any networks so I cannot register on my network with my working sim.
Wifi does work but the 3G SIM version does not...so I'm not sure why there is a 3G version if it does not work.
Pity...I will have to restore my previous ROM...
Click to expand...
Click to collapse
3G works. You need to create settings APN. Then save from the menu located in the upper right corner.
Finefeather said:
In your 4.4.4 Rom for Samsung Galaxy Tab 10.1 3G when I start the Contacts "People" app it immediately stops and I get the message.
"Unfortunately, Contacts has stopped working....ok"
I can send you a log but I do not know how to do it...never done it yet...help!
I really like this ROM and have the latest version installed and it really works well so far...2 days now.
Better than CM10.2 so far...please don't stop working on this ROM.
Thanks for a great job.
Click to expand...
Click to collapse
Don't know if this helps. I have 2 of the p7510 tabs. On one, the owner is linked to my Gmail and contacts works fine. On the other, the owner is not linked, and people crashes every time. I have tried to link the owner with no luck, but believe this may be the cause of the crash.
Contacts application can work sometimes (depending on the GAPPS), but if you choose to import or export from the SIM card, then again receives "Unfortunately, Contacts has stopped working .... ok"
It seems that the kernel A1 has a problem with the SIM card.
Bluetooth problem when building from sources
Good morning,
I'm trying to build CM-11 for p4 from sources using the https://github.com/loosethisskin repositories.
I have problems with the bluetooth compilation which fails due to:
In function 'bool android::ssrcleanupNative(JNIEnv*, jobject)':
packages/apps/Bluetooth/jni/com_android_bluetooth_btservice_AdapterService.cpp:671:26: error: 'const struct bt_interface_t' has no member named 'ssrcleanup'
ssrcleanup is not defined in the typedef of /hardware/libhardware/include/hrdware/bluetooth.h, but it is in the external/bluetooth/bluedroid/btif/src/bluetooth.c file.
Does anyone knows how to circumvent this problem?
Thank you in advance
Links to roms are all viruses
Hi, first off i just want to say thanks for taking the time to build this rom. I continue to try and breathe new life into my old galaxy tab 10.1 with each update.
However, I'm trying to download the links to the ROMs for CM11 found here: http://forum.xda-developers.com/showthread.php?t=2098429
Which leads me here: http://d-h.st/Mb1 -- specifically the image I want.
Clicking either of those links downloads a virus. There is no zip. On Mac, it is .dmg file, and on windows an .exe. Even Chrome identifies them as Malware.
I've tried googling for the filename, but can not find any other links that weren't laden with viruses. Can you help me locate the image?
Wow kitkat, much lag, wow
Why does mostly everyone experience little lag or no lag at all, but me and others have unbearable lag? Running the latest version on CM 11, reverted back to CM 10.2 (much smoother in my experience) Hope someone answers here..
Was wondering if there will be a cm12 for p4 Wifi? This is probably my favorite rom even though it's not lollipop. Great job
CM
Does anyone think it's possible to get a CM12 rom developed for galaxy tab 10.1?