Huawei Germany did publish an official release of ICS 4.0.3 at their website huaweidevices-dot-de for the Mediapad.
Regards,
Thomas
could you check if Finnish language is included
@mrpn900: If "Suomi" is the correct entry for Finnish, then yes, it is included.
I attached 3 screenshots showing all the included languages. I hope it helps other users with the same question about their language, too.
thank's a lot! General version did not include Suomi, so I have to reflash with the German version.
What are changes between this and HUAWEI MediaPad FIRMWARE(S7-301u,android4.0,C232B002,General Channel) ?
I don't think there was a changelog published, but the main difference is the "Channel" -> while the C232 Versions are for "general channel" i.e. the international version of the ROM, this ROM is C167 "German Channel" - probably some settings are included for german SIMcards / WiFi Channels? (Please correct me if I'm wrong)
Before I flashed this ROM I was on HUAWEI_S7-301u_FIRMWARE_android4.0_C232B002_General_Channel_05010YBX-root - the main difference I noticed during the last 3 days of usage was better batterylife. While on the old ROM (C232) I had a batterydrain of 1% per hour in standby, this ROM (C167) is really good in that regard. Around 1% batterydrain during 10 hours of Standby is more than acceptable, imho.
does the Huawei cloud storage work with this version? It does not work with the general version for me. Only way to get to the storage now is desktop
root?
Hi, noob here!
got the pad from one m8 saturday, rooted, with ICS 4.0.3 gen. chan....
Don't care about SIM and 3g, won't use it (couch, surfin'...), but is this rom rooted, as some from main Huawei site? Will I loose root flashing it?
thx...
---------- Post added at 12:08 PM ---------- Previous post was at 11:19 AM ----------
Ok, reading is learning!
http://forum.xda-developers.com/showthread.php?t=1570265
Did anyone try it on this rom, already?
mrpn900 said:
does the Huawei cloud storage work with this version? It does not work with the general version for me. Only way to get to the storage now is desktop
Click to expand...
Click to collapse
Huawei cloud apps are not included in the German Channel release.
BTW: The official download link is http://huaweidevices.de/download.php?d=mediapad&f=Huawei_Mediapad_ICS_FIRMWARE(S7-301u_andr4.0.3_C167B003_German_Vers).zip
---------- Post added at 02:41 PM ---------- Previous post was at 02:34 PM ----------
nmsys said:
Ok, reading is learning!
http://forum.xda-developers.com/showthread.php?t=1570265
Did anyone try it on this rom, already?
Click to expand...
Click to collapse
There is a pre-rooted version uploaded by Comec (all credit to him) in the German android-hilfe.de MediaPad subforum:
Huawei_Mediapad_ICS_FIRMWARE(S7-301u_andr4.0.3_C167B003_German_Vers)_ROOT.part2.rar
Huawei_Mediapad_ICS_FIRMWARE(S7-301u_andr4.0.3_C167B003_German_Vers)_ROOT.part1.rar
Changes to the rom: rooted, SuperUser.apk, init.d support, support for German keyboard layout for external devices.
Use at your own risk! Works as normal dload update. MediaPad will be reset to factory defaults. Save your app-data.
Thanx for your advertising cloogshizer...
Here's another link to the german version..
@ htc-developers.de
I use the rooted version from comec. It does run smooth and stable.
Regards,
Thomas
Vielen Dank fuers Antwort, cloogshizer!
Sorry Mod, english forum, I know...
Will try it this weekend and report also. It seems, for what I've read so far the best rom available -regardind deep sleep batt. issues, and in-browsing reboots. Many thx Comec!
Cheers, and thx for your kindness!
Anyone noticed any difference with this one comparedto the general version?
mangoman said:
Anyone noticed any difference with this one compared to the general version?
Click to expand...
Click to collapse
I didn't use the general version myself, but AFAIK the Huawei cloud apps are missing in the 167 version.
well, i noticed the switch between edge\3g\h is much better.
With the general version it would go to edge, then not go to 3g and h when available.
Had to change from wcdma preferred to wcdma only. With this one wcdma preferred seems to work. Atleast it doesnt go to edge in the same places.
Need some more testing to confirm, but it looks like a major reason to use the german version.
huawei released kernel source code so developers can start developing custom roms
But only for Honeycomb, afaik.
http://www.huaweidevice.com/worldwi...nfoId=3135&directoryId=5011&treeId=3290&tab=0
maybe custom rom based on honeycomb with many tweaks and modded kernel would be better than official ics
I would like to know if the call settings entry on the Settings menu could be added to allow us to get to the native SIP/internet calling support that is supposed to be in ICS. Can that be added?
anybody know which is the latest ealease containing language Suomi?
Related
Thread Moved to Original Development.....
http://forum.xda-developers.com/showthread.php?p=48535961#post48535961
Larga vida al p500!!
Wait for a stable build like 4.2 or in dremas 4.0.4
Enviado desde mi Nexus 4 mediante Tapatalk
you must have recovery in this thread to flash:
http://forum.xda-developers.com/showthread.php?p=48367371#post48367371
Hey Hephappy!
Why did you leave XDA? We need you!
Your ROMs were first of the kind for our device. Moreover, good developers are leaving development of this device because they have moved on to another device.
Optimus One users want good ROMs too!
Hephappy left xda but still actively working on P500
rhar**** said:
Hey Hephappy!
Why did you leave XDA? We need you!
Your ROMs were first of the kind for our device. Moreover, good developers are leaving development of this device because they have moved on to another device.
Optimus One users want good ROMs too!
Click to expand...
Click to collapse
I don't know why he left but he is still working on P500 and all his works will be available for us.
LG-P501 said:
I don't know why he left but he is still working on P500 and all his works will be available for us.
Click to expand...
Click to collapse
Thank god he didn't leave dev. Hats off to you
Feedback - [DEV][ROM][4.4.2] [CM11] KITKAT for LG-P500[WIP][VER-1]
I've been using this KITKAT Rom (from 27. December) for 5 days now and I'm really impressed of it - thx goes to mukulsoni and hephappy.
My feedback here, since I'm not allowed to post on a dev thread:
- Battery backup is acceptable with 2 days for me (Wifi off, Location off, low usage)
- Installed Calendar from PlayStore and calendar syncronization is working
- If you do not want to use Hangeout as you default sms client you can install 8sms from the PlayStore instead (which I did)
- Not Working:
- Wifi Tethering (@mukulsoni please add to not working list)
- voice search does not work for me (maybe someone else knows how to get it working?)
- overall performance (smartassV2, 240-710) is good but not snappy (I'm using a class 10 8GB sdcard).
Conclusion:
@all who are interested in KITKAT on our old P500, give the linked ROM a try - you won't be disappointed.
androidck said:
I've been using this KITKAT Rom (from 27. December) for 5 days now and I'm really impressed of it - thx goes to mukulsoni and hephappy.
My feedback here, since I'm not allowed to post on a dev thread:
- Battery backup is acceptable with 2 days for me (Wifi off, Location off, low usage)
- Installed Calendar from PlayStore and calendar syncronization is working
- If you do not want to use Hangeout as you default sms client you can install 8sms from the PlayStore instead (which I did)
- Not Working:
- Wifi Tethering (@mukulsoni please add to not working list)
- voice search does not work for me (maybe someone else knows how to get it working?)
- overall performance (smartassV2, 240-710) is good but not snappy (I'm using a class 10 8GB sdcard).
Conclusion:
@all who are interested in KITKAT on our old P500, give the linked ROM a try - you won't be disappointed.
Click to expand...
Click to collapse
Did not like the Dec 27 build.
I am running the Omni preview which is more or less cm-11. Favorably impressed.
Offline voice search will not work on our armv6 device. Thanks Google.
Online voice does work. Use voice dictation or swype/dragon to get it into google search. Must tap search, but ...
Actually, something before getting the voice is what armv6 stops. I cannot reproduce how I got there, but I had it actually, init, take my voice and get results!! Once, just once. So ... who knows?
Dovidhalevi said:
Did not like the Dec 27 build.
I am running the Omni preview which is more or less cm-11. Favorably impressed.
Offline voice search will not work on our armv6 device. Thanks Google.
Online voice does work. Use voice dictation or swype/dragon to get it into google search. Must tap search, but ...
Actually, something before getting the voice is what armv6 stops. I cannot reproduce how I got there, but I had it actually, init, take my voice and get results!! Once, just once. So ... who knows?
Click to expand...
Click to collapse
So it seems that online voice search is not working for now.
Why do you prefer the Omni preview? Could you please give some more details?
androidck said:
So it seems that online voice search is not working for now.
Why do you prefer the Omni preview? Could you please give some more details?
Click to expand...
Click to collapse
I took this because this is what is being developed right now, where fixes are going.
On-line voice does work. Go to settings->language&input->voice recognition. Since you are likely running with Google Search around, you will see two (count 'em) google options here. Choose the other one.
If you only see one, you need to install the old VoiceSearch.
Feedback - [DEV][ROM][4.4.2] [CM11] KITKAT for LG-P500[WIP][VER-3]
Changes between Ver1 and Ver3 I encountered
- battery consumption seems to be improved a little bit
- stock SMS/MMS app included now (no need for Hangout or 8sms)
- "national roaming" support seems to be gone now (new MVNO Settins are unclear for me - any hints are welcome)
- camera problems
- autofocus does not work anymore - focus does not go green (worked on Ver1)
- choosing HDR option leeds to FC of camera app (to disable HDR you have to clean App Settings)
Trying to record a video freezed the phone (gave me an FC on Ver1) - had to remove the battery.
Experiences from other users are welcome.
Ver6-New:
I am not able to install this version oder version 5 - status 7 error (some symlinks missing)
New Experimental released Jan 14, 2014
A new experimental build has been released at Jenkins.cm_p500-userdebug-cm-11.0:victory:
can not install Ver6-New - symlinks missing
I am not able to install this version over version 5 - status 7 error (some symlinks missing)
Has anybody a clue? I already downloaded this version twice.
I had no problems installing the old Ver6 before. Unfortunately I've deleted the old Ver6 ;-(.
androidck said:
I am not able to install this version over version 5 - status 7 error (some symlinks missing)
Has anybody a clue? I already downloaded this version twice.
I had no problems installing the old Ver6 before. Unfortunately I've deleted the old Ver6 ;-(.
Click to expand...
Click to collapse
Wrong thread.
Dovidhalevi said:
Wrong thread.
Click to expand...
Click to collapse
I am not allowed to post in dev thread, so please be lenient towards me.
Back to my update problem: I already checked md5 hash and in Addition I repartioned and formatted my sdcard, formatted system and tried to flash via recovery (ver from 16th january) - but same error.
Is it possible that system of this rom is almost full and that some memory blocks of my system storage is dead? It is just an assumption or guess, but if too few memory could cause such an upgrade failure, which apps are secure to remove?
Once again, thx for any hints.
androidck said:
I am not allowed to post in dev thread, so please be lenient towards me.
Back to my update problem: I already checked md5 hash and in Addition I repartioned and formatted my sdcard, formatted system and tried to flash via recovery (ver from 16th january) - but same error.
Is it possible that system of this rom is almost full and that some memory blocks of my system storage is dead? It is just an assumption or guess, but if too few memory could cause such an upgrade failure, which apps are secure to remove?
Once again, thx for any hints.
Click to expand...
Click to collapse
Ok, now try flashing any older cm 10.1 or 10.2 over the new recovery (jan16) and let me know the status. You can write on my thread after completing your 10th post.
mukulsoni said:
Ok, now try flashing any older cm 10.1 or 10.2 over the new recovery (jan16) and let me know the status. You can write on my thread after completing your 10th post.
Click to expand...
Click to collapse
I already installed version 5 which didn't cause any problems. But I will try an older cm version in addition. I'll post the result afterwards.
@mukulsoni: I installed 10.1.6 (hephappy) without any problems.
Could you please provide the old Version6 rom again. I want to install this version until there is a (I find) a solution for my specific problem.
Thanks in advance.
androidck said:
@mukulsoni: I installed 10.1.6 (hephappy) without any problems.
Could you please provide the old Version6 rom again. I want to install this version until there is a (I find) a solution for my specific problem.
Thanks in advance.
Click to expand...
Click to collapse
Strange, you are able to install version 5 but not 6! anyways here is the version 6 old link but install it over version 5 only. http://forum.xda-developers.com/showpost.php?p=49845686&postcount=482
mukulsoni said:
Strange, you are able to install version 5 but not 6! anyways here is the version 6 old link but install it over version 5 only. http://forum.xda-developers.com/showpost.php?p=49845686&postcount=482
Click to expand...
Click to collapse
Thank you for the link. I flashed that version 6 over version 5 sucessfully. As you said, it is really strange that i can not install the 6-new version. But for now I am happy with it. If you are able to find any possible explaination I am still curious to know of course.
Does MHL still work with CM 11 (the rom found here: http://forum.xda-developers.com/showthread.php?t=2566642)
A poster on the second page said it worked, but I am not sure if the rom has changed / been updated since that post.
(This post probably belongs in the development thread, but I don't have access - so thanks for any help!)
Markbeams said:
Does MHL still work with CM 11 (the rom found here: http://forum.xda-developers.com/showthread.php?t=2566642)
A poster on the second page said it worked, but I am not sure if the rom has changed / been updated since that post.
(This post probably belongs in the development thread, but I don't have access - so thanks for any help!)
Click to expand...
Click to collapse
yes. i still use MHL out everyday with my appradio 2. works perfectly.
Working, but still waiting for an update from silesh, i have the 20140113 version because it have full french translation, the older version doesn't have full translate. For the battery drain problem, i just disable wifi on 20140113 and use lte.
Q&A for [ROM][OFFICIAL][5.0.2_r1] BlissPop v2.1 by Team Bliss-02/25 [Togari]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][5.0.2_r1] BlissPop v2.1 by Team Bliss-02/25 [Togari]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Great!!
Did a fresh install with no problems. Battery life is great. No bugs or problems that i have found. Awesome features. Thanks dev. Will definitely give a donation to this
big rom, thank OP get it for togari.
all everything work stable and can be use every day.:good:
except still have some issues, it work fine so far on togari, and wish @nprev420 will support other my device is i605. thank sir.
---------- Post added at 08:19 AM ---------- Previous post was at 08:14 AM ----------
@mr.nth.na.vn now, i using dual recovery and can you let me know that how to i can use twrp newer version?
i too tried many way but it not work. many thank
weq1209qwe said:
except still have some issues, it work fine so far on togari, and wish @nprev420 will support other my device is i605. thank sir.
---------- Post added at 08:19 AM ---------- Previous post was at 08:14 AM ----------
@mr.nth.na.vn now, i using dual recovery and can you let me know that how to i can use twrp newer version?
i too tried many way but it not work. many thank
Click to expand...
Click to collapse
don ask ETA...etc,lol
thank to OP @nprev420, best rom. but why decide use kernel stock is Zombie lp?
@nprev420, thank for great rom, many features into this rom, fantasy rom.:good:
but i can't find any where to show Pie Control (almost other rom lp5 still not yet have Pie Control) in device of my friend.
how can i configure the Lockscreen with clock?
how can i configure the Lockscreen with clock?
I can configure it, because in the lockscreen i cant see cclock, the lockscreen dont accept WidGets
Pegasushunter said:
how can i configure the Lockscreen with clock?
I can configure it, because in the lockscreen i cant see cclock, the lockscreen dont accept WidGets
Click to expand...
Click to collapse
Can some people help me please ?
Pegasushunter said:
Can some people help me please ?
Click to expand...
Click to collapse
Can some people help me please ?
Hello,
I have a problem.
In our household 2 Sony phones (C6833) are operated.
Both of them have BlissPop as ROM.
Unfortunately, both mobile now have the same MAC address.
How can I change the MAC address on a mobile phone now.
(I already tried everything so google will bear, unfortunately nothing has helped)
Could someone tell me how I can change the MAC address in this ROM?
Not the original Sony MAC addresses appear to be here so used.
(sorry for my bad english, I'm from Japan)
Error?
Feedback for last Nightly vom 10.03
Hello,
the last Nightly not booting, its sticking on SONY.
sorry for my bad english.
So is the ambient display issue a problem with cm12? I realized my screen comes on like it wants to show me my lockscreen but is just blank...just a backlit screen. Other than this I have be loving this ROM. It has been my daily driver for about a week now
Hi,
I have a problem, I have .4.4.4 stock rom, and when i try to install in Recovery this rom always brick my Z Ultra,and must flash orginal rom in flashtool, how should i install it ?
Hello,
I hope better stability soon to use your ROM, but actually latest stable release won't boot and latest nightly freeze and reboot the phone.
I have tried from clean install with or without gapps a lot.
Thank you.
ok , im searching my behind off to find that GDv2 kernel for z ultra , and most close i came is your reply, would you be so kind to share with me where can i download that kernel, and could it work with android 5.1 or only 5.0.2 ? thank you
I have running this rom from 25th and very nice Working!
My device 6802
Thanks dev
Thank you very much for providing this beautiful ROM
But I had a question:
How do I enable the pop-up incoming calls?
Hi can someone tell me what nightly the date.. Has android 5.0.2? Please I love bliss rom and 502
Yes. I got the same GPS issue. In order to get the GPS working, I need to clear the cache in the google play service app. I only had this problem after the new google play service update.
i have two problem for latest version blisspop
i have two issues arise in the latest version. im not sure its my phone or latest version bug tho.
1) when i set continuous alarm and make it never silent, but it seem around 2-4 times snooze it will dismiss and go straight for tomorrow. it is a bug or what?
2) is there mobile locator apps for blisspop or can i simply use myxperia?
hope anyone can check and confirm this. =)
CyanogenMod 12.1 thread
Click here
What is CyanogenMod?
CyanogenMod 11.0 is a custom ROM based on Android 4.4.4 (KitKat), which is designed to increase performance and reliability over AOSP for your device. CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
Downloads:
CyanogenMod:
Latest version: 2015-08-29
GApps link
Instructions:
First time flashing CyanogenMod 11.0 on your device, or coming from another ROM (e.g. MIUI)?
WARNING: This procedure will factory reset your device! Accounts, applications, settings, etc will be lost!
Download the file cm-11-xx-UNOFFICIAL-hm2014811.zip to your phone from the links below
Download the file gapps-kk-xx-minimal-edition-signed.zip to your phone from the links below
Reboot your device into Recovery mode by holding PWR+VOL-UP
Format userdata, cache and dalvik cache
Install both the ROM and the GApps zip files
Reboot
Upgrading from earlier version of CyanogenMod 11.0?
Download the file cm-11-xx-UNOFFICIAL-hm2014811.zip to your phone from the links below
Reboot your device into Recovery mode by holding PWR+VOL-UP
Install the ROM zip
Reboot
Experience issues?
Please provide the following info:
logcat
dmesg
/sys/fs/pstore/ram_oops if it is a reboot
Create an issue on the GitHub repo! I won't entertain many requests on this thread.
Special mentions:
@balika011 - Open source kernel
Changelog
29/08/2015
Update base to MIUI 5.8.22
Get rid of prebuilt kernel for CAF LNX.LA.3.7.2 kernel
Use CM 11.0 gralloc and media HALs
Use CAF LNX.LA.3.7.2 WLAN and FM drivers
Use CAF LNX.LA.3.7.2 camera and GPS HAL
Switch to FIOPS IO scheduler
Better memory management (KSM, adaptive LMK, kernel updates)
Update interactive governor to latest CAF source
Bugs:
Ambient light sensor is broken
Battery data is slightly inaccurate
02/08/2015
Enabled CNE and DPM for lower network and Wi-Fi power consumption
Added MPEG-DASH support
Added color temperature calibration support (Display -> Screen calibration)
Updated blobs to MIUI 5.7.16 Global
25/07/2015:
Improved GFX performance and touch response
Improved camera shutter speed performance and audio recording quality
Added volume rocker wake controls
Added support for media jack buttons
Enabled notification LED toggle and multicolor LEDs
Fixed freeze on playing a particular MKV video with DTS audio format
Fixed HEVC decoder
Disabled zRAM
19/07/2015:
Fix proximity sensor (for those who had problems)
18/07/2015:
Fix FM radio
Enable MP3/AAC offload
Use stock auto brightness levels
Enable zRAM
Added QCOM extended media capabilities
Add proper verified build fingerprints
Updated camera blobs from MIUI 5.7.16
13/07/2015:
Optimize interactive governor tuning for power efficiency
Optimize IO performance
Optimize RAM usage for fewer redraws
Fix Bluetooth Low Energy peripheral mode
02/07/2015:
Fixed GStream services like SoundCloud
Fixed FM radio
Updated audio calibration
Set appropriate model IDs
Allow ROM to be flashed freely from any Redmi 2 variant
28/06/2015:
Updated CM sources and blobs from MIUI 5.6.25
Updated kernel from MIUI 5.6.25
Improved camera performance
Improved memory management
Set SELinux to enforcing
Reduced WIFI battery consumption
21/06/2015:
Updated CM sources
Improved performance and reduce micro-stuttering
Clean up
Increased minimum brightness
Thank you zwliew
A review
Old post( made on 18th July 2015)
Thanks a lot! any idea if/when our device will get its own forum on xda? What about a codename, like redmi 1s is known as Armani. And do you plan on making this cm11 as official by submitting it to them?
Edit(8-8-2015)
Okay I'm editing this useless post and adding some info to make it useful because a lot of people are gonna be seeing it, since it's on the first page.
I flashed this rom about a week ago and this is the most stable rom for this device. It is pure and simple Cyanogenmod. No unneeded extra bloated features gotten through hacking and what not. Nope. Simple and pure cyanogenmod. And that's why it runs smooth as butter. Let's talk point wise about some things.
1) Battery- For me, the most important thing about a phone is its battery life. If it is plugged in half the time, what's the use. A mobile is supposed to be mobile. This rom has great battery life. It gives a screen on time of 7 hours. Read that again. Not overall time. Just the screen on time of 7 hours. Over all time can easily go upto 3 days if you use it for 2 hours every day. I'm a heavy user though and it lasts me a minimum of 7 hours. This is as good as the stock Miui rom and the developer has done this without the kernel sources, so thumbs up to him. Be sure to thank him by pressing the thanks button.
2) Ram - It's a 1GB ram phone. At least that's what I'm using. So dont expect the performance of a flagship from it. If you use greenify and hibernate all useless apps, you wont face a single lag or stutter. I always have around 300-350 mb ram free after installing around 120 apps. All of them are greenified, except whatsapp, hike, alarm clock, nova launcher and swiftkey. I'm a greenify freak. Whatever you do, be sure to greenify facebook and chrome because they hog a lot of ram.
3) Sound/Music - I was very surprised by the music quality that this rom provides. It's loud and clear as the Miui rom. To get such clarity and quality in an early build of a custom rom and that too without kernel sources is a miracle. Kudos to the dev.
4) Camera - Now we are talking. :victory: Everyone is concerned about the camera. Well the stock camera is not good and it doesnt take pictures as good as the Miui rom camera. But not to worry, go to page 4 or 5 of this thread and you'll find the apk of cyanogen camera linked there. Download it and install it normally. It works quite good. It also has the option of time lapse video which is quite nice. But some of you might not like even that camera. So search for "Miui camera port for cyanogenmod" and you should find a miui forum link where the zip file is present. Download the file and flash it via recovery and voila! you'll have that awesome camera back again. PS - It's not the miui 6 camera, its miui v5 camera. PPS - It was originally intended for Redmi 1s but it works very good on our device. The name of the file is MIUICamera44-4.zip and its size is 2.2 mb.
That's it people. This is an awesome rom and i havent faced any bugs till now. I cant even imagine using that horrible miui 6. Xiaomi makes great hardware but poor software. Installing cm11 makes our device high on steroids. :highfive: Enjoy the rom. I will update the post later if i feel like adding some more info.
Dont forget to thank the developer for his hardwork by pressing the thanks button. Thanks me too, if i helped you.
thakurneel said:
Thanks a lot! any idea if/when our device will get its own forum on xda? What about a codename, like redmi 1s is known as Armani. And do you plan on making this cm11 as official by submitting it to them?
Click to expand...
Click to collapse
Im not sure but http://forum.xda-developers.com/t/redmi-2 is like a temporary forum for redmi2, the codename is HM2014811(12,13...18)
By the way.. i flashed it and i didn't test everything, but it seems solid, thanks again.
thakurneel said:
Thanks a lot! any idea if/when our device will get its own forum on xda? What about a codename, like redmi 1s is known as Armani. And do you plan on making this cm11 as official by submitting it to them?
Click to expand...
Click to collapse
CM most likely won't accept devices on CM 11.0. I'm still waiting for official kernel source release before starting to work on CM 12.1.
Sent from my 2014811 using Tapatalk
thakurneel said:
Thanks a lot! any idea if/when our device will get its own forum on xda? What about a codename, like redmi 1s is known as Armani. And do you plan on making this cm11 as official by submitting it to them?
Click to expand...
Click to collapse
CM most likely won't accept devices on CM 11.0. I'm still waiting for official kernel source release before starting to work on CM 12.1.
Sent from my 2014811 using Tapatalk
pirej said:
Im not sure but http://forum.xda-developers.com/t/redmi-2 is like a temporary forum for redmi2, the codename is HM2014811(12,13...18)
By the way.. i flashed it and i didn't test everything, but it seems solid, thanks again.
Click to expand...
Click to collapse
This forum is really just a list of threads with a particular tag. Every thread with the tag redmi-2 will appear here. Still waiting for an official forum from XDA [emoji14]
QCOM optimized Dalvik libraries
zwliew said:
QCOM optimized Dalvik libraries:
Enhanced dalvik performance and battery life.
Click to expand...
Click to collapse
Please add more info...
only flash OnePlus_One_XNPH44S-Dalvik over your latest CM11?
Thanks for your efforts anyway. I wonder if you have a plan to develop CM12.1 .
---------- Post added at 06:52 PM ---------- Previous post was at 06:40 PM ----------
pirej said:
Im not sure but http://forum.xda-developers.com/t/redmi-2 is like a temporary forum for redmi2, the codename is HM2014811(12,13...18)
By the way.. i flashed it and i didn't test everything, but it seems solid, thanks again.
Click to expand...
Click to collapse
O,no. The codename sounds terrible. I think it should be another one.
---------- Post added at 07:05 PM ---------- Previous post was at 06:52 PM ----------
Feedback：It seems like everything works great except for Power-off Alarm.
Autines said:
Thanks for your efforts anyway. I wonder if you have a plan to develop CM12.1 .
---------- Post added at 06:52 PM ---------- Previous post was at 06:40 PM ----------
O,no. The codename sounds terrible. I think it should be another one.
---------- Post added at 07:05 PM ---------- Previous post was at 06:52 PM ----------
Feedback：It seems like everything works great except for Power-off Alarm.
Click to expand...
Click to collapse
HM201481x is the actual codename of the device.
I've just released a new build with a fix for proximity (for those who had issues with it before).
Good to finally see this rom here in xda,thank you so much for your work.BTW on your latest build and i can confirm that the proximity now works perfectly.
Waiting for CM 12.1 build.
zwliew said:
HM201481x is the actual codename of the device.
.
Click to expand...
Click to collapse
Yep, and due to this proliferation of codenames... it will be a mess understand which ROM is for which Redmi 2.
As an example: is this ROM for HM2014813? or just 11 (which is the most common one?)?
Can we share the best practice over at miui.com forum by stating in the title the code of the device the ROM is made for?
For the people out there:
- Device code is written on the phone, below the battery slot
- 2014811 is the 1GB RAM model
- 2014813 is the 2GB RAM model
Thanks!!!
[email protected] said:
Yep, and due to this proliferation of codenames... it will be a mess understand which ROM is for which Redmi 2.
As an example: is this ROM for HM2014813? or just 11 (which is the most common one?)?
Can we share the best practice over at miui.com forum by stating in the title the code of the device the ROM is made for?
For the people out there:
- Device code is written on the phone, below the battery slot
- 2014811 is the 1GB RAM model
- 2014813 is the 2GB RAM model
Thanks!!!
Click to expand...
Click to collapse
That isn't true actually. 2014813 is just 2014811 with different bands. 2GB models have another codename altogether (either that or they have the same codename). Anyway, my ROM works on all Redmi 2 variants, except that it will change your model to 2014811 once flashed.
Thanks. Power-off Alarm still has not been solved yet. Looking forward to your next version.
Redmi 2
zwliew said:
That isn't true actually. 2014813 is just 2014811 with different bands. 2GB models have another codename altogether (either that or they have the same codename). Anyway, my ROM works on all Redmi 2 variants, except that it will change your model to 2014811 once flashed.
Click to expand...
Click to collapse
I'm looking for a new phone, and the Redmi 2 made it to my shortlist, but I would like CM on it. When I buy one, it will be a 2GB HM2014813 (they are actually advertised with this number) because of the bands supported.
When you say this ROM will change the model to 2014811, do you mean it just changes the modelnumber in the software, or does it also change the supported bands to the ones of the 2014811?
Also: are there any known non-working parts like in other ROM's?
Thanks!
Kroesss said:
I'm looking for a new phone, and the Redmi 2 made it to my shortlist, but I would like CM on it. When I buy one, it will be a 2GB HM2014813 (they are actually advertised with this number) because of the bands supported.
When you say this ROM will change the model to 2014811, do you mean it just changes the modelnumber in the software, or does it also change the supported bands to the ones of the 2014811?
Also: are there any known non-working parts like in other ROM's?
Thanks!
Click to expand...
Click to collapse
The ROM only changes the model number. Your phone still acts like a HM2014813.
The ROM is pretty much bug-free; I have been using it as my daily driver since the first release.
Hi, does this ROM works on Redmi 2 Enhanced (2GB ram,16GB internal) version?
coklatua said:
Hi, does this ROM works on Redmi 2 Enhanced (2GB ram,16GB internal) version?
Click to expand...
Click to collapse
Yes, this ROM works on all Redmi 2 variants.
Hi,where is the address of the new version?
Redmi 2
it's a bug or what..
when play games, videos, a bit lag appear... it's so annoying for me, can you fix it?
sorry for my bad english
Elastic Rom
Based on Stock Deodexed P5200 & P5210
Features
Deodexed
Zipaligned
Super Fast
Note 5 Iocns
S6 Toggles
Note 5 Sounds - Boot animation
Debloated
Tab 4 launcher without google search
Tab 4 Weather widget
Build prob Tweaks
Note 5 and S6 Wallpapers
Bravia Engine 4
Replaced Clock and Calculator with google clock and material calculator
Added Lite Clean master
Tab S File Manger
Note 4 Memo
S5 SPlanner
Bugs
-Can't Change Lockscreen Wallpaper From Touchwiz Launcher
-You have to flash Super Su and Google Gapps pico version
-Massaging app in v3.1 P5210 version Force closes
>go to settings and force stop it
Requirements
-You will need Latest TWRP form Download Section
-A Nanodroid Backup in case of anything
Installation
Step 1 - Download and put Rom, Supersu, and Gapps on SD Card
Step 2 - Wipe User Data
Step 3 - Flash Rom
Step 4 - Flash Supersu
Step 5 - Flash Gapps package
Step 6 - Wipe cache and dalvik
Step 7 - Reboot Device (Will take a few minutes on first boot)
IF It doesn't boot and stuck on Samsung logo just turn of the tab (long press 10 sec on power key) and open it again
Credits :
@ Restl3ss
@CAG-man
@Angel_666
@Chainfire
@faruqmunshif
@binh24
@UAdeveloper
@KhaledzZ
Testers Credits :
@scorch_wolf
@fcorbera73
@Steve1698
Changelog for v2:
Removed:
More system apps
Google Chrome
Xposed(Multiwindow - Amplify - Double tab to sleep - Menu to be Gone)
Added:
More tweaks
Replaced Music app with latest play music app
All in one for easy gesture control
Version 3 changlog
Updated google apps
removed unnecessary apps
added more tweaks
brought back stock settings
added bindroid's kernal in P5210 version
Version 3.1
P5210 Version Boots By butting stock Kernal
XDA:DevDB Information
Elastic Rom, ROM for the Samsung Galaxy Tab 3 10.1
Contributors
khaledreno
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.2.2 and above
Version Information
Status: Stable
Current Stable Version: 3.1
Stable Release Date: 2015-1-17
Created 2015-10-21
Last Updated 2015-1-17
XDA:DevDB Information
Elastic Rom, ROM for the Samsung Galaxy Tab 3 10.1
Contributors
khaledreno
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: P5200& P5210 Devices Only
Version Information
Status: Stable
Current Stable Version: 3.1
Stable Release Date: 2016-1-17
Created 2015-10-21
Last Updated 2016-1-17
Reserved
Download
P5200 (3G) Model
Elastic Rom v1 For : https://drive.google.com/open?id=0B0vba5CjnAIWTkkxMFdQNGFQdVU
Elastic Rom v3 : https://drive.google.com/file/d/0B0...=sharing&resourcekey=0-V48M2hBMkpXd-P74PPYaxA
Recovery :
TWRP Flash with Recovery : https://www.androidfilehost.com/?fid=24052804347820751
TWRP flash with ODIN : https://www.androidfilehost.com/?fid=24052804347820750
P5210 (WIFI) Model
Elastic Rom v2: https://drive.google.com/file/d/0B0vba5CjnAIWUm1oMjJ4TlQ5VFk/view?usp=sharing
Elastic rom v3 (need to replace boot.img with the test version) : https://drive.google.com/file/d/0B0vba5CjnAIWQ3RJeV9XekROUDA/view?usp=sharing
Elastic Rom v3.1 : https://drive.google.com/file/d/0B0vba5CjnAIWajJsYVFXWG9uWUU/view?usp=sharing
Recovery :
TWRP Flash with Recovery : https://www.androidfilehost.com/?fid=24052804347820759
TWRP Flash with ODIN : https://www.androidfilehost.com/?fid=24052804347820753
Must Download and Flash!
Chainfire's Super user flashable zip : https://download.chainfire.eu/396/supersu/
Gapps : http://opengapps.org/
(x86 > 4.4 > pico)
Oh! Nicely done
It's great to see support for this device! Do you plan on bringing this to P5210/P5220 as well? Also, how's the RAM usage on this one? I can't try this ROM for myself unfortunately because I have a P5210, but I'm interested in trying it out if you ever port it to my device. That being said, keep up the good work!
forrealgames145 said:
Oh! Nicely done
It's great to see support for this device! Do you plan on bringing this to P5210/P5220 as well? Also, how's the RAM usage on this one? I can't try this ROM for myself unfortunately because I have a P5210, but I'm interested in trying it out if you ever port it to my device. That being said, keep up the good work!
Click to expand...
Click to collapse
it is in my next update plan don't worry
Great!!!!
This sounds amazing. I have a p5210 (wifi model) i would really love to use this. How long do u think it would take for the next update?
scorch_wolf said:
This sounds amazing. I have a p5210 (wifi model) i would really love to use this. How long do u think it would take for the next update?
Click to expand...
Click to collapse
Next week i hope because i have exams
Next Update For Elastic Rom is P5210 (WIFI) build
Next week
Cant wait
khaledreno said:
Next Update For Elastic Rom is P5210 (WIFI) build
Next week
Click to expand...
Click to collapse
Ohhh cant wait. This looks amazing. I really like the look of the notification toggles. I hope you do well on your exams.
Looks beautiful !! :good::good:
Speed?
UAdeveloper said:
Looks beautiful !! :good::good:
Click to expand...
Click to collapse
Gonna be great. Is it fasst? Not sure if its fast because of the touchwiz ui. Dammn cant wait for next week.
I'm downloading this as I'm texting...looking forward to using it, I'm p5200,I hope my sd card ain't gonna suffer...lol,
---------- Post added at 11:31 PM ---------- Previous post was at 11:29 PM ----------
[/COLOR @Khalendreno ...this is great mate, happy to see development support for this ROM, excellent work...looking at that changelog hmmmm, interesting!!!
I'm curious boss, thaT MULTINDOW is it due to xposed framework???
---------- Post added at 11:40 PM ---------- Previous post was at 11:31 PM ----------
I was running the unofficial CM 5.1.1 before seeing this...you mentioned wiping SYSTEM ...what about data/cache/dalvik cache?
I'm asking this coz I was on lollipop and F2FS...I also guess that I must format my data and system back to ext 4
---------- Post added 29-10-2015 at 12:05 AM ---------- Previous post was 28-10-2015 at 11:40 PM ----------
So far so good...installed without errors...now on the installation settings!!
....Will reach back again with my test drive experience!!!
Thanx @Khalendreno good work mate, good work!!!
Im curious...
[email protected] said:
I'm downloading this as I'm texting...looking forward to using it, I'm p5200,I hope my sd card ain't gonna suffer...lol,
---------- Post added at 11:31 PM ---------- Previous post was at 11:29 PM ----------
[/COLOR @Khalendreno ...this is great mate, happy to see development support for this ROM, excellent work...looking at that changelog hmmmm, interesting!!!
I'm curious boss, thaT MULTINDOW is it due to xposed framework???
---------- Post added at 11:40 PM ---------- Previous post was at 11:31 PM ----------
I was running the unofficial CM 5.1.1 before seeing this...you mentioned wiping SYSTEM ...what about data/cache/dalvik cache?
I'm asking this coz I was on lollipop and F2FS...I also guess that I must format my data and system back to ext 4
---------- Post added 29-10-2015 at 12:05 AM ---------- Previous post was 28-10-2015 at 11:40 PM ----------
So far so good...installed without errors...now on the installation settings!!
....Will reach back again with my test drive experience!!!
Thanx @Khalendreno good work mate, good work!!!
Click to expand...
Click to collapse
Im curious dude, whats the rom like? Is it fast? Does multi window work properly?
Well I hate to trash any developers work...cuz this guys put so much time in doing this work ,testing and modding and porting ROms to our devices.....
I'm really grateful to them!!
Here is a list of what I really hated with ELASTIC ROM:
1.ROM use too much RAM, system ui stopped working more than 3x since installation and that message kept popping out, and when I click wait still comes back and when I click okay it reboots and still say samething system ui not responding and becomes unusable!!!
Frustrated,I reinstalled the ROM using my usual apps, multibooting, same thing happened again, system not responding, crash, reboot!!
2.the user interface is laggy but then again that's the reputation of TW
3.multiwindow?
...this is not straight out of the box, this is uSing xposed framework,xhalofloatingwindows,xmultiwindow,and multiwindowsidebar...
Meaning if you're new to the scene and not know how this modules work with xposed framework you're gonna get lost and frustrated!!
4.the preinstalled apps...
....the ROM is full of xposed modules, before I even install one of mines the list is already around 10 if not more...this shows that this ROM apart from note 5 icons , note 5 boot sounds, has being mostly twicked using xposed framework!! Things we're today very comfortable in doing ourselves, Not disrespecting anyone by saying that!!
5.using nels83 CM 12.1 unofficial, beta 1 latest version it's the ultimate choice!!
It's lag free, memory and battery friendly, and I had not never suffered any lags like I accounted in this ROM based on 4.4.2!
I know one would argue and say that @nels83's work it's based on cyanogen-mod and unoFficial...that being said he's ROM It's much faster, stable, and based on lollipop 5.1.1!
6.for most of users what matters if how the ROM responds, is it lagging, how's the battery life, how many preinstalled apps it has consuming the RAM, coz I'm gonna need install mine too, and still expect flawless responds from the ROM!
But this ROM ,ELASTIC ROM, has failed this departments mostly!!
7.I believe that if a ROM is put out for testing and claimed to be custom and all it has it's mainly xposed framework modules, then really any of us should start uploading our twicked ROMs for other users to try out!!!
8.with all respect to khalendro and his team, I couldn't use the ROM to even run KODI...I tried this twice, it stopped responding and said app not responding then after few seconds rebooted!#
Same thing happened with restoring my apps with titanium BACKUP, it stopped responding, crashed, rebooted...it seems like heavy duty apps if running,I couldn't use my tablet....
But having said all this things...I believe that most of the xda developers are excellent and having looked at your contributors I was amazed hoping that the ROM will out beat most of the TW based custom KITKATS!!
....................
My purpose of writing this is not to trash anyone or mislead other users keen to try out this ROM, this are my critics based on the experience I got from the little time I attempted to test your hard work mate!!
Maybe it's bad luck, I've reverted back to my nandroid backup coz I was getting frustrated which should not be the case after installing a new ROM, looking forward to your future work mate!!
...................
i hope that my critics if any were helpful in anyways rather then disrespecting your hard work!!
........
This will obviously not be complete if I don't mention all the good things I can't get from CM 12.1!
1.p5200 RILL works perfectly well, voice calls good, but this is not working on my CM 12.1, still under development
2.smart cover worked out of the box with this ROM..., camera also works fine, including screen mirroring/chromecast
3.for some reason Wi-Fi seemed to be stable while updating apps from play store, an issue I have on my current CM 12.1
3.I loved the NOTE 5 icons, but angried by all those millions xposed modules preinstalled!!
4. I'm positive I would have found more if I had more time to use the ROM without random reboots and system not responding messages!!!
5......
@[email protected]
Thanks for the report i'm very happy to see that there is somone using my work and reporting it
as for the rom problems
i guarantee to you that the rom has no problems of FC's and random rebbots
why ?
bacause i have flashed it 5 times before uploading it to xda
i wiped
system
cache
dalvik cache
and data
to Guarantee that there isn't iny space for errors like what you faced
there is also someone have tested the rom and he didn't complain from anything in the rom no lag no FC's and no random reboots and i have asked him just from half an hour
i'm not saying that you lie or somthing of course not
but you know android is full of little mistakes that could make big errors
as for the Rom problems
1 - Much ram
it's based on stock kitkat of samsung and i have deodexed it and removed alot of samsung crap to Guarantee that the Ram consumption is the lowest i have added greenify and busy before uploading it but after testing it i had a random reboots so i didn't want to have problems like this so i removed booth of them
2-as for system ui FC
the only modification that i made it into it that i added the s6 toogles and i'm the one who made the toogles and the one who but it there - however i keept the orignal system.ui in it's place Root/priv.app/system ui .apk.bak
if you want to replace it with the orignal just change the system ui .apk to system ui.apk.1 and remove the .bak from the other one and try it
3-the lag of touchwiz
the main goal of this rom is to be like best touchwiz rom for the tab 3 10.1 so this means that it must be fast and there is nothing called lag
this rom is currently my OS for the tab and i have no problems at all i haven't installed any new thing
4-multiwindow
i have searched for weeks for a solution of the multiwindow for our tab 3 10.1 model but non of them are working there is a dev who tried as hard as he could to make it works for us but it didn't
so the only option i had is to use xposed module
5- as for the alot of xposed modules
every one of them is usefull module
i have installed them in rom to make the user relaxed by not searching for them and installing them i can remove them easily
but i see that i'm as i user i need them
as for the fix of your problems
i see to backup you data with TWRP
then wipe
system
cache
dalvik cahce
and data
then reflash the rom and see if there is any problems
and you can restore data with TWRP i do this alot and not facing any problems with the rom
It's good that you haven't taken my review as an attack...like I did mention I wiped everything including my internal storage x2 but faced lags......
Multi booting will be great if used without xposed ...it's really encouraging to see that someone out there is trying something...
? ? ?
....
Thanks for the tip about the system ui FC
All best with future release!!
Still....
HiOk it may have some bugs and maybe the touchwiz ui is a bit laggy but if im honest i like touchwiz better than cyanogenmod because cyanogenmod is boring and dull and touchwiz looks great. Even though cyanogenmod is faster.
The next version should be better as in less of those bugs you guys are talking about and also support for the wifi version of our tab 3. Great job though dude you really put a lot of effort into this rom and cant wait for the next update of elastic rom. Thanks!!!! Touchwiz is the best!!!!!!!!!!!!!!
Good job thanks for your hard work
Hmmmm....
Hey do you know when the next update will come out. I really want to try it out however i have wifi version (p5210). Do you know when the next version will come out?? I really want to know what day it will come out. Great rom.!!!!