Adding to build.prop tweaks
Root explorer
copy to all
Searching build.prop system/build.prop
open text editor
Paste to all
Deleting build.prop.bak
Reboot and enjoy ;D
For CM and stock 4.1.2
#Performance tweaks
debug.enabletr=true
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
#Media Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
#Liquid Smooth Ui
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
#Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
#3G network for speeding up
ro.ril.set.mtu1472=1
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
#Better battery life:
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.mot.eri.losalert.delay=1000
ro.ril.sensor.sleep.control=1
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#Signal Tweaks
persist.cust.tel.eons=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
#Net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
#Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=180
## Scrolling speed
ro.min.fling_velocity=8000
ro.max.fling_velocity=12000
windowsmgr.max_events_per_sec=300
ro.min_pointer_dur=8 touch.pressure.scale
#Nitro lag Nullifier ACTIVITY
INACTIVE_RESET_TIME=false
APP_SWITCH_DELAY_TIME=false
CONTENT_APP_IDLE_OFFSET=false
CPU_MIN_CHECK_DURATION=false
EMPTY_APP_IDLE_OFFSET=false
ENFORCE_PROCESS_LIMIT=false
GC_TIMEOUT=false
MAX_ACTIVITIES=false
MAX_HIDDEN_APPS=false
MAX_PROCESSES=false
MAX_RECENT_TASKS=false
MAX_SERVICE_INACTIVITY=false
MIN_CRASH_INTERVAL=false
MIN_HIDDEN_APPS=false
MIN_RECENT_TASKS=false
PROC_START_TIMEOUT=false
SERVICE_TIMEOUT=false
# RAM Management
ro.config.hw_fast_dormancy=1
#Allow purging of assets
persist.sys.purgeable_assets=1
for stock 4.3
## Performance, Smoothly, Battery saving tweaks
debug.enabletr=true
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
persist.sys.composition.type=c2d
persist.android.strictmode=0
ro.secure=0
debug.kill_allocating_task=0
debug.egl.profiler=1
force_hw_ui=true
ro.min_pointer_dur=8
ro.debuggable=1
ro.config.disable.hw_accel=false
persist.sys.purgeable_assets=1
## Gaming tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
## Media Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
## Liquid Smooth Ui
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
windowsmgr.max_events_per_sec=90
touch.presure.scale=0.001
## Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
## Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
## Better battery life
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.mot.eri.losalert.delay=1000
ro.ril.sensor.sleep.control=1
## Scrolling speed
ro.max.fling_velocity=20000
ro.min.fling_velocity=18000
we have to put # Performance tweaks, #Enable tile rendering, #3d performance
or just
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
sorry for my bad english
---------- Post added at 05:54 PM ---------- Previous post was at 05:41 PM ----------
we have to put # Performance tweaks, #Enable tile rendering, #3d performance???
or just
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
sorry for my bad english
jancsessz said:
Adding to build.prop tweaks
#Performance tweaks
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
#Enable tile rendering
debug.enabletr=true
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
#Media Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
#Liquid Smooth Ui
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
#Sensor Sleep
# For sensor sleep control
ro.ril.sensor.sleep.control=1
#3G network for speeding up
ro.ril.set.mtu1472=1
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
#Better battery life:
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
#improve battery under no signal -- need test
ro.mot.eri.losalert.delay=1000
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#Signal Tweaks
persist.cust.tel.eons=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
#net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
#Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
#OPEN DNS
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
#Website Bypass
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
#Allow purging of assets
persist.sys.purgeable_assets=1
# Disable strict mode checking
persist.android.strictmode=0
## Scrolling speed
ro.min.fling_velocity=8000
ro.max.fling_velocity=12000
Click to expand...
Click to collapse
So can you test it and give us real results not just placebo ?
Also im kinda noob and i dont know how to change all this if this would have been a zip file i could just flash it would have been easier
Thanks in advance
aliiahmed.20 said:
So can you test it and give us real results not just placebo ?
Also im kinda noob and i dont know how to change all this if this would have been a zip file i could just flash it would have been easier
Thanks in advance
Click to expand...
Click to collapse
Pls upload your build.prop.
jancsessz said:
Pls upload your build.prop.
Click to expand...
Click to collapse
what build prop dude im telling you im noob in this stuff and i dont even know where to find this build prop thing but i can hear that these tweaks can be flashed through a zip file or something
aliiahmed.20 said:
what build prop dude im telling you im noob in this stuff and i dont even know where to find this build prop thing but i can hear that these tweaks can be flashed through a zip file or something
Click to expand...
Click to collapse
use preformance script but dont copy someone else buildprop u will end up bootloop!! tweak it yrself... its in system/buildprop
i cant find any of them in my build.prop, why ?
jancsessz said:
Adding to build.prop tweaks
Root explorer
copy to all
Searching build.prop system/build.prop
open text editor
Paste to all
Deleting build.prop.bak
Reboot and enjoy ;D
#Performance tweaks
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
debug.enabletr=true
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
#Media Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
#Liquid Smooth Ui
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
#Sensor Sleep
# For sensor sleep control
ro.ril.sensor.sleep.control=1
#3G network for speeding up
ro.ril.set.mtu1472=1
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
#Better battery life:
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
#improve battery under no signal -- need test
ro.mot.eri.losalert.delay=1000
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#Signal Tweaks
persist.cust.tel.eons=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
#net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
#Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
#OPEN DNS
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
#Website Bypass
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
#Allow purging of assets
persist.sys.purgeable_assets=1
# Disable strict mode checking
persist.android.strictmode=0
## Scrolling speed
ro.min.fling_velocity=8000
ro.max.fling_velocity=12000
Click to expand...
Click to collapse
i search the build prop with a root browser then open the text editor and paste that and delete build brop.bak and that its all?
Sx1I said:
i search the build prop with a root browser then open the text editor and paste that and delete build brop.bak and that its all?
Click to expand...
Click to collapse
Yes thats all my friend
But remember 1 thing never quote the whole OP
Sent from my C5303 using xda app-developers app
thanks and forgive me i am new
Has anyone tested it?
If yes how's it working?
I think everyone here is looking for some comment that proves the build.prop tweaks makes difference!
is it working fur kitkat rom bro?
Yes
Tapatalk-kal küldve az én C5303-el
Bootloop on 4.1.2 .254 stock rooted.
Would it work for any device?
Sent from my Xperia Mini using xda app-developers app
sud.vastav said:
Would it work for any device?
Sent from my Xperia Mini using xda app-developers app
Click to expand...
Click to collapse
It will not work on your mini device
Updated!
Have anyone tested it yet?
Sent from my C5302 using Xparent BlueTapatalk 2
Guys i am sorry but what is build.prop.bak ? and where ?
by the way how i am paste ?
like this ?
#Performance tweaks
debug.enabletr=true
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
like this ?
#Performance tweaks
debug.enabletr=true
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
like this ?
debug.enabletr=true
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
like this ?
debug.enabletr=true
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
Before put tweaks
Sent from my C5303 using XDA Premium 4 mobile app
Related
I am back with my new guide of build.prop tweaks. This tweaks has been tested on Galaxy S Duos Gt S7562 and has been working fine. Since these tweaks doesn't relate with the device model so you can try the tweaks on your device.
Tweaking build.prop may also completly brick your phone?
Remember I am not responsible for any damage to your device and if you point your finger at me i will laugh at you...??
Spoiler
#Qualcomm tweaks
#
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
#UI general tweaks
#
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
hw3d.force=1
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
touch.presure.scale=0.001
debug.fb.rgb565=1
ro.wmt.blcr.enable=0
#General GPU tweaks
#
debug.composition.type=gpu
debug.egl.hw=1
debug.sf.hw=1
ro.sf.compbypass.enable=0
debug.egl.profiler=1
debug.enabletr=true
persist.sys.composition.type=gpu
persist.sys.use_16bpp_alpha=1
persist.android.strictmode=0
ro.min_pointer_dur=1
#Power saving tweaks
#
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
ro.ril.disable.power.collapse=1
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
#Call quality tweaks
#
ro.ril.enable.amr.wideband=1
persist.cust.tel.eons=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
#Wireless speed tweaks
#
wifi.supplicant_scan_interval=180
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=1
# Kernel Tweaks
ro.kernel.checkjni=0
# Ram Tweaks
persist.sys.purgeable_assets=1
# Google DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
# Better scrolling responsiveness
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# Better Touch Responsiveness
touch.presure.scale=0.001
# Rapid Boot Technology 1.1 (Reduces bootup time)
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
#3G TurboCharger Enhancement
#
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
#PMP
#
davilk.vm.heapsize=192m
davilk.vm.heapstartsize=8
davilk.vm.heapgrowthlimit=64m
windowsmgr.max_events_per_sec=90
ro.ril.gprsclass=12
debug.performance.tuning=1
video.accelerate.hw=1
ro.media.dec.jpeg.memcap=12000000
ro.media.enc.hprof.vid.bps=12000000
persist.sys.use_dithering=0
dalvik.vm.startheapsize=8M
dalvik.vm.dexopt-flags=m=y
dalvik.vm.execution-mode=init:jit
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.telephony.call_ring.delay=0
pm.sleep_mode=1
persist.sys.purgeable_assets=1
media.stagefright.enable-record=false
ro.ril.hep=1
ro.mot.eri.losalert.delay=1000
ro.ril.enable.dtm=1
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hsdpa.category=28
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=9
### End of new tweaks ###
PRESS THANKS
REGARDS
banerjeeayan1996™
So, sorry, but what to do with those lines? How can it be use by me? Teach me master. ?
How to tweak.
What to do with this line?
Dr Grato said:
So, sorry, but what to do with those lines? How can it be use by me? Teach me master.
Click to expand...
Click to collapse
Found it how.
http://www.viraltecho.com/build-prop-tweaks-for-jellybean-kitkat-lollipop-android-smartphones/
HELLO TO ALL GUYS, I MADE THIS GUIDE FOR SHOW TO ALL PEOPLE OR DEVELOPERS OF ROMS ALL THE CODES FOR TWEAKS TO BUILD.PROP ( system ), this work on all devices but some roms can have problems if you put something of this so asking ur Dev roms...
[TO ALL DEVS: feel free to use all the codes in your rom, but remember give credits to me and xda community for edit codes][TO ALL DEVS: all the codes are working fine in lollipop and are edited by me and others dev for more performance and others thing so not needed do more changes]
Code:
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
REMEMBER
Roms like Project Lucky, Noble Rom, and others can already have some of this codes, SO PAY ATTENTION on what you will do or what you are doing because im not responsable of your future problems or errors if you do something wrong so please first of all ask your developers or look in the "BUILD.PROP" if it already have the code you want put
Ok nice to find them all around on one place all do I don't agree with most of them.
Hire are some for you to try out.
#dalvik
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=150m
dalvik.vm.heapsize=261m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
Adjusted values by my self to fit this tin can based on this as a base:
https://01.org/android-ia/user-guides/android-memory-tuning-android-5.0-and-5.1
I deed go with initial devlik heap size of 16MB instead of 8 as 8 doesn't fit so it's increased almost instantly. I am still testing them my self but I have to say impressions are rather good in many arias from tasks witching to more tasks steady remaining in RAM. Less to none apps crashing & also far less lag in memory hungry apps. All this as this should actually initial save a pretty good amount of ram compared to initial reference settings. The positive effect on battery life remains to be seen but it certainly is positive. I am testing it on last official CM12.1.
You may also want to try:
debug.enabletr=1
It enables Tile based rendering. The tile based rendering is faster but it also needs more time for textures to be loaded so results don't have to be always positive (even in most cases they are). Tile based rendering on the other hand certainly also saves some power.
Even Adrenos aren't top of the pops in Tile based rendering (compared to MALI's & PowerVR where this is default rendering mode) it certainly helps.
Let me demonstrate in tied screanshot.
For rendering composition I use:
debug.composition.type=dyn
This is basically to let it choose by flags between GPU & CPU all do most things are GPU rendered this day's still saving some juice on those that are ment to be rendered on CPU is a good thing. It naturally goes with:
dev.pm.dyn_samplingrate=1
I find this surface flinger config best up to date:
#Surface flinger 1.0 2.0 4000
ro.fling.distance.coef=2.0
ro.fling.duration.coef=3.0
ro.max.fling_velocity=3000
It saves a lot on resources even compared to defaults not to mention over exaggerated other ones & yet it produces very smooth results.
Also remove the remark (#) on:
persist.sys.purgeable_assets=1
It does cost a bit of speed (rather not significant) but I still recommend it to be used in contrast to same page merging where performance hit is significant enough.
That's it in shortly, best regards.
Zola III, Thanks for the tip, i will edit the codes and put more
Hi,
There is a way to increase sound volume in s3 neo? It's way to low! Like editing some file or something... I am rooted but viper app doesn't install it's saying something about the busybox...
Mar Ian said:
Hi,
There is a way to increase sound volume in s3 neo? It's way to low! Like editing some file or something... I am rooted but viper app doesn't install it's saying something about the busybox...
Click to expand...
Click to collapse
Well honey install the busy box comands extension binary.
https://play.google.com/store/apps/details?id=stericson.busybox
(that is installer).
It is possible to manually adjust output levels with good root Explorer & text editor but I don't recommend you to do that as you are obviously a noob.
Anyway the file is located at root /system/etc/mixer_paths.xml
& your interest is only in the:
<!-- Play Scenario -->
Section.
Zola III said:
Well honey install the busy box comands extension binary.
https://play.google.com/store/apps/details?id=stericson.busybox
(that is installer).
It is possible to manually adjust output levels with good root Explorer & text editor but I don't recommend you to do that as you are obviously a noob.
Anyway the file is located at root /system/etc/mixer_paths.xml
& your interest is only in the:
<!-- Play Scenario -->
Section.
Click to expand...
Click to collapse
I had to modify something in the build prop file and now viper works but I don't think it increases the in call volume or overall volume. It just gives better headphone audio.
Anyway thanks man! :good:
Mar Ian said:
I had to modify something in the build prop file and now viper works but I don't think it increases the in call volume or overall volume. It just gives better headphone audio.
Anyway thanks man! :good:
Click to expand...
Click to collapse
LOL. When you install ViPER4Android it mods build.prop by it self disabling lo power (DSP) audio decoding. It's natural that it doesn't touch cellular radio layer (fm radio & calls), however all adjustments are in the mentioned omx file.
Thank you very much. I am trying all of these tweaks on my s5 running cm14 ROM and it looks like its running perfectly fine so far. I will test more and see what kind of improvements I get.
Thanks for combining all of these in a single thread. It just removed the need of any kind of performance or tweaking app.
How to apply this tweak? Do I just paste it into build.prop and then reboot? I have cm 12.1
Thank you for this thread.
Ciro said:
HELLO TO ALL GUYS, I MADE THIS GUIDE FOR SHOW TO ALL PEOPLE OR DEVELOPERS OF ROMS ALL THE CODES FOR TWEAKS TO BUILD.PROP ( system ), this work on all devices but some roms can have problems if you put something of this so asking ur Dev roms...
[TO ALL DEVS: feel free to use all the codes in your rom, but remember give credits to me and xda community for edit codes]
[TO ALL DEVS: all the codes are working fine in lollipop and are edited by me and others dev for more performance and others thing so not needed do more changes]
Code:
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
Click to expand...
Click to collapse
There is a code ro.config.tima umm will it be tima or time?
Ciro said:
HELLO TO ALL GUYS, I MADE THIS GUIDE FOR SHOW TO ALL PEOPLE OR DEVELOPERS OF ROMS ALL THE CODES FOR TWEAKS TO BUILD.PROP ( system ), this work on all devices but some roms can have problems if you put something of this so asking ur Dev roms...
[TO ALL DEVS: feel free to use all the codes in your rom, but remember give credits to me and xda community for edit codes]
[TO ALL DEVS: all the codes are working fine in lollipop and are edited by me and others dev for more performance and others thing so not needed do more changes]
Code:
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
Click to expand...
Click to collapse
Umm there is a code ro.config.tima will it be tima or time
I tried boeffla gave me boot loop.
Im currently on slim lp 5.1.1 and i wanma change the kernel to tweak some battery stuff.
Thanks in advance
http://arter97.com/browse/S3/kernel/xda/arter97-kernel-5.0.zip
http://forum.xda-developers.com/devdb/project/dl/?id=18503
tested ?
or
# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Enable GPU Acceleration
debug.sf.hw=1
video.accelerate.hw=1
debug.performance.tuning=1
persist.sys.composition.type=gpu
debug.qc.hardware=true
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
hw3d.force=1
ro.product.gpu.driver=1
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
hwui.render_dirty_regions=false
hwui.disable_vsync=true
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.ril.disable.power.collapse=0
ro.vold.umsdirtyratio=20
# Battery save
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Sensor Sleep Control
ro.ril.sensor.sleep.control=1
# Device will boot faster
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Reduce dial-out time
ro.telephony.call_ring.delay=0
# Allow purge of assets to free more ram
persist.sys.purgeable_assets=1
# More free ram and apps load faster
dalvik.vm.dexopt-flags=m=y
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
# Increase general Performance
debug.performance.tuning=1
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
# Reduce the black screen time of the proximity sensor
ro.lge.proximity.delay=15
mot.proximity.delay=15
ro.ril.enable.amr.wideband=1
# TOUCH
touch.presure.scale=0.001
# Better Scrolling responsiveness and speed
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Force launcher into memory
ro.HOME_APP_ADJ=1
# Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=y,v=n,o=v
#dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Disable Error reporting and logs
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Disable Sending Usage Data
ro.config.nocheckin=1
# Fix some application issues (FC)
ro.kernel.android.checkjni=0
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# CRT
persist.sys.screen_off=crt
persist.sys.screen_on=none
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=180
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
# Disable logcat
logcat.live=disable
# Better image quality, lower performance.
lpa.decode=false
tunnel.decode=false
lpa.use-stagefright=false
del
hello friends finnally i found a solution for droid razr lagg problem
you need to just add this on your droid razr
system/build.pro
Code -
art.vm.heapstartsize=16m
art.vm.heapgrowthlimit=96m
art.vm.heapsize=256m
art.vm.heaptargetutilization=0.75
art.vm.heapminfree=2m
art.vm.heapmaxfree=8m
persist.sys.ui.hw=1
debug.performance.tuning=1
debug.gr.swapinterval=0
persist.sys.use_16bpp_alpha=1
persist.sys.purgeable_assets=1
persist.sys.scrollingcache=4
persist.sys.purgeable_assets=1
persist.sys.smoothscrollbar=true
debug.mdpcomp.logs=0
logcat.live=disable
ro.fps_enable=1
ro.fps.capsmin=60fps
ro.fps.capsmax=60fps
ro.radio.noril=no
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=y,v=n,o=v
ro.HOME_APP_ADJ=1
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264×1840
ro.media.panorama.frameres=1280×720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false
debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
net.tcp.buffersize.default=4096,87380,256960, 4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,409 6,163 84,256960
net.tcp.buffersize.umts=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,8 7380,256960,4096,163 84,256960
ro.mot.eri.losalert.delay=1000 (could brake tethering.)
ro.ril.power_collapse=1
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
ro.mot.eri.losalert.delay=1000
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
logcat.live=disable
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
ro.telephony.call_ring.delay=0
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
windowsmgr.max_events_per_sec=150
ro.min_pointer_dur=8 ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
persist.cust.tel.eons=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy
persist.sys.use_dithering=1
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
this work with Lolipop / Marshmallow and Nougat
TESTED on DROID RAZR XT912
Android Version - 7.1.2 Nougat
OS - Resurrection Remix
What does this code do? The lag is caused by the slow cpu..
Wow. Totally worked! I just pasted the whole thing to the bottom of my build prop file with build prop editor. Rebooted, and bippity boppity boo, SO MUCH lag was gone. Of course, there's no changing the fact that this is an OLD phone with a SLOW processor by today's standards. But the super-lag is gone. It's manageable now.
THANKS!
Here is my Build Prop Tweaks from Jumping from Various Android Phones
Which seem to be useful for all my phones
If it doesnt work for you please post or if I am missing something please let me know
Just sharing as it helps me, so trying to help others
Please try this at you own risk :fingers-crossed:
Just use Build Prop Editor from G'play (needs to be rooted)
Its how I do it
Copy and Paste the below under the Last line, Save it and reboot to take affect
ro.HOME_APP_ADJ = 1
debug.performance.tuning=1
ro.ril.power_collapse=1
ro.ril.disable.power.collapse=0
pm.sleep_mode=1
ro.config.hw_power_saving=true
persist.cust.tel.eons=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.vc_call_steps=20
ro.config.hw_power_saving=1
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
#GOOGLE DNS*
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.wcdma.dns1=8.8.8.8
net.wcdma.dns2=8.8.4.4
net.hspa.dns1=8.8.8.8
net.hspa.dns2=8.8.4.4
net.lte.dns1=8.8.8.8
net.lte.dns2=8.8.4.4
net.ltea.dns1=8.8.8.8
net.ltea.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
wifi.supplicant_scan_interval=300
# Net speed tweak
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.hspap=4096,87380,1220608,4096,1 6384,393216
net.tcp.buffersize.hsupa=4096,87380,704512,4096,16 384,262144
net.tcp.buffersize.evdo=4096,87380,563200,4096,163 84,262144
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
ro.lge.proximity.delay=0
mot.proximity.delay=25
ro.telephony.call_ring.delay=0
ring.delay=0
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.camcorder.videoModes=true
ime_vibration_pattern=0:60
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
# Video streaming optimization
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
media.stagefright.enable-rtsp=true
media.stagefright.enable-qcp=true
media.stagefright.enable-aac=true
# Camera Tweaks Supports Google Camera
persist.camera.HAL3.enabled=1
camera.HAL3.enabled=1
persist.camera.eis.enable=1
camera.eis.enable=1
persist.camera.is_mode=4
camera.is_mode=4
persist.camera.disable_zsl_mode=1
camera.disable_zsl_mode=1
persist.camera.gyro.android=4
camera.gyro.android=4
persist.camera.tof.direct=1
camera.tof.direct=1
persist.camera.tnr.preview=1
camera.tnr.preview=1
persist.camera.tnr.video=1
camera.tnr.video=1
ro.camera.notify_nfc=1
camera.notify_nfc=1
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
logcat.live=disable
# Auto Dimming Issues
persist.sys.cabc.enable=0
ro.service.cabc.supported=false
#scrolling speed
windowsmgr.max_events_per_sec=150
ro.min_pointer_dur=8
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
persist.sys.scrollingcache=3
debug.sf.hw=1
-----------------
These ones I have tried in other phones but *not this one*...... yet
Just Gaming
persist.sys.NV_FPSLIMIT=60 #or 90
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20 #or30
persist.sys.purgeable_assets=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Dalvik Virtual Machine Tweaks
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy
dalvik.vm.dex2oat-filter=interpret-only
dalvik.vm.image-dex2oat-filter=speed
Click to expand...
Click to collapse
Once copied over, Save the modified script with build.prop editor and reboot into recovery
Wipe dalvic cache and restart
Enjoy
Many of those build.prop entries have been shown to be removed from code 1-2 releases ago. Did you actually check these or are you just throwing it all out there?
bobbarker2 said:
Many of those build.prop entries have been shown to be removed from code 1-2 releases ago. Did you actually check these or are you just throwing it all out there?
Click to expand...
Click to collapse
For a second when I read that I thought I was back in 2010 ??